Hook for heating ladder
Háček na radiátor do koupelny. Nutné tisknout z PET_G kvůli teplotě radiátoru Udrží i velkou mokrou osušku
- Downloads
- 1,719
- Likes
- 46
- Rating
- 5
1,508 models
Háček na radiátor do koupelny. Nutné tisknout z PET_G kvůli teplotě radiátoru Udrží i velkou mokrou osušku
I modified the original and fantastic idea from wolffaayyy here on printables. I modified the sheet mount, so that it only has 2 Steelsheets instead of 3 (most of us will probably only have 2. Also a modified it with a better tray…
simple model of a dragon skull for decoration. The skull can be placed on the stand or hung. (See pictures). If you don't need the stand, simply leave it out. scale: I have uploaded 2 sample sizes. Only the skull can be scaled smaller…
Compatible with standard garden hose fittings Mounting plate with holes for secure attachment to wood with zip-ties, screws or any other method Included broom stick adapter for attaching to broomstick shaft or anything similar. (use…
A robust hook to hang a ladder onto a wall.
This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. I made this version because several people indicated that they liked my eBike Charging Station but preferred a standalone…
This is a fun little planter I designed in Fusion360. Plant little vines, or flowers and watch them grow till you have a blooming tunnel of blooming flowers on crawling vines! The boxes are pretty self explanatory, the arch is a little…
Printet on a Original Prusa i3 Mk3s+ using PLA 0.4 nozzle, 20%infill 0.3 mm layer hight
It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps. The predecessor model uses an M3 screw as a pin and an M3 nut as a mating thread Replacement Buckle for 24mm wide loop Strap with M3 screw as a…
I previously used a large spoon to aid drying out my Camelbak bladder, but it wasn't that good of a solution. This design isn't anything fancy, but it does a great job of holding the walls of the badder apart to dry it out. I printed it…
Service Key (elevator, maintenance room, electrical box, fireman ladder) a key with Insert Bit : Square : 6mm, 7mm, 8mm Rectangle : 6x9 mm Triangle : 9, 11, 14 square (female) : 6, 7, 8
Printed with PLA+ and it works. TPU or PETG should also work fine. Included Fusion 360 file, so you can make your own adjustments.
This is a 8-stacked print which includes a modification to the model, the support tower for the pins, and the slicer settings. Each piece has a height of 12mm, which is enough in my experience, especially with PETG. I've also added my own…
I created this collection for the cerealbox i use ( Link ) A scound reason for this was, that i hadn't found a good drybox with a easy and robust rewind function so i had to create this. A third reason for this was, that all the dryboxes…
Our Son got a Tonibox and the Tonies (small figures to place on the tonibox to start music etc) needed a home. So we got the IKEA LUSTIGT. A small wallmounted shelf with ladders. But our son wanted more ladders so i simply constructed the…
english We had a “FRZ”-Ladder in our household where the rubber boot fell apart because of their age. The plastic was very brittle and unfortunately there are no spare parts available because the company that produced these ladders most…
Dies sind zwei sehr stabile Halterungen, um eine Leiter an der Wand aufzuhängen. Eine Halterung ist innen ca. 120mm, die andere 140mm lang. Die Befestigungsbohrungen sind ausgelegt für 4mm Senkkopfschrauben. Translation: DeepL These are…
Ladder for H0 and other miniatures I printed in Fuzzy Skin, but you can also print it without Fuzzy Skin. Printer settings: Perimeter: 2 Infill: 0% Printing supports: No Fuzzy Skin: Yes, All, 0.5mm
This version is updated. Please use this instead: https://www.prusaprinters.org/prints/27855-updated-12mm-x-8-shields-with-ladder-locks-for-8mm Print instructions This is for PETG. All print settings are included in the 3mf file. You need…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Add a some small Cylinders as Negative Volume for draining No Supports needed Scale it as you like :)
Printed with PETG
I printed the brackets with glow in the dark PLA filament so my daughter can see the ladder steps better at night. Each of the brackets is pushed onto the ladder rung from the front and rear and screwed on with two screws. One of the…
There's only so much space at the top of the ladder for tools, so I decided to make a box that clips into one of the existing holes in the top of ladder. Werner has updated the top plastic part of their fiberglass ladders and now has a…
We prefer to not use our hand rail at the stairs in the shallow end but we got tired of looking at the unsightly holes that fill with water, dirt, and leaves. So, we made these covers.
A wallholder for a ladder
This is a simple plate that attaches to a tripod using a cheap 50mm Arca rail. I spaced the outer holes to fit a set of Bushnell Forge 15x56 binoculars. The center hole is a ¼” countersunk to attach the rail. I use the “Armageddon Gear”…
A remix of the stretching-cat watch stand for a Galaxy watch. The original didn't want to stay standing up because the cord would pull it to one side or the other, so I added a baseplate to keep it stable. I made a channel on the…
UPDATE: New Aurapol/Spectrum Spool Design Supported! This 3D-printed ring functions as a removable platform for NFC tag stickers used in filament spool tracking and management systems. Easy transfer to a new spool thanks to the slot for…
Material: PETG Nozzle: 0.4mm Layer height: 0.2mm Supports: Support on build plate only Infill: 80% Fill pattern: Gyroid Printed as on screenshot.
Small ladder to attach to the side of your RC car
Many amateur radio operators use doublet antennas that are optimally fed by ladder line. Ladder line, unlike coax, must be kept clear of conducting objects. These standoffs allow the ladder line to be routed in such a way that it is kept…
This remix has a reduced the profile (X Axis) so it has a slimmer/narrower profile , it will fit into tighter spots, and corners. I have moved the mount holes to centre of the model, using 3.5x25 screws . And the bracket is good for a…
not printed on my Prusa, printed this one on my previous printer, cad made in fusion 360.
This model was printed with PETG to withstand the outdoor weather. The ball has a 37mm diameter and fits a 19.5mm diameter cross bar. The Fusion 360 model is parametric that can be adjusted to accommodate other light post sizes.
Once in a while a mouse falls into the drinking water for the chickens and is unable to climb out because of the steep and slick walls, especially when the water is low. So, the prevent them from drowning, I created a small ladder that…
Another spare foot for a ladder with round profile. - My neighbor saw me make this one: https://www.printables.com/model/1000873-spare-foot-for-ladder and brought along his old ladder…:-)
Dimensions intérieures du tube 47 x 17 mm Les dimensions de ce modèle peuvent être modifiées dans le tableur du fichier freecad. Aucune connaissance nécessaire. les dimensions modifiables figurent dans les cellules vertes. Les autres sont…
Thank you for downloading and liking the model! Your support means the model reached the 400 downloads in one month milestone ! 🏆 As a thank you, Version 2.1 adds a prop silencer attachment. New prop of the SCCY CPX-2 9mm handgun. This is…
Commercial license for all my models -→ https://www.patreon.com/MeasureOnce New assemblable version available on Makerworld https://makerworld.com/en/models/2624847-infinite-jacobs-ladder-toy#profileId-2897666 DO NOT SCALE. There is 0.4mm…
Thanks for downloading my model. If you like it and would like to help fuel my designs I'll welcome a coffee donation :D thanks! https://ko-fi.com/supermatt The clear plastic card holders we use at work just don't last. I designed an ID /…
New! Version 2 is up, with a more robust ladder kickstand :) As seen on HotMakes episode 148, it's a little firetruck with a hinged ladder and chunky wheels! Video link: https://www.youtube.com/live/jzZMH5YQIHc?feature=share Gratuitous…
It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…
Update: April 20, 2026 I added more sizes per requests. Update: February 26, 2026 Per a request, I added the 80mm version and 165mm files to this. If anyone needs any other sizes, please let me know. Thanks! I like the original design…
simple, basic lid raiser for Creality K2 plus Raises the glass lid by 40mm so that the bowden tube no longer rubs against the glass. Adds the option of ventilation. The ventilation sliders are inserted into the front, back and side…
Greebles Part 2! Entry panels, hatches, and more! No support required The code and model files are using “Hatchbox” pla. Change if you are using something else (trying to use up what I bought a few months ago.) Use variable height to…
This was inspired by Zack Freedman's Gridfinity project. My take on a Micro SD card holder for Gridfinity. I created using Onshape . Added step file for easy changes.
Saw this silly thing on IG (https://www.instagram.com/reel/C2FxIc6pKIZ/) and decided to make one of my own just for the fun of it :) Prints with no support and uses 6mm magnets.
Just "discolored" remix with added brim on selected areas
Box for hepa filter and activated carbon pellets for the Creality K2 The K2 Plus already has a carbon filter installed, but it is only partially filled. I also wanted to have a hepa filter on the housing and came up with this design.…
Dummy 13 storage cases don't have room for accessories! This solves that problem. Remix of original case by Lvnatic with added room when different hand variants are used. I also made an additional accessory box and a lid. They are…
reverse modeled adderini. needs to be open to public for improvements. here it is
Thank you Marko Borsic for the original design. It fits great, and prints well. I've noticed that the stiff 6mm PTFE tube coming from my Polydryer filament box tugs on the adapter, and pulls up the side that the tube goes into. I've added…
No matter what I tried, PrusaSlicer 2.4.2 insisted on unsupported bridges for the roof of the sharks mouth. I added a cylinder support enforcer to the unsupported section, and after printing, simply removed the supports.
Modified riser that provides a much cleaner and pinch free route for the filament, especially if printing from a dryer/drybox. Two options. A simpler one with the tube mostly floating and one with an arm that provides support to the tube…
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as a single color or multi color print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma…
Go ahead and divide 39 mm by your desired size and use that number as the size modifier to get a buckle of your desired size. Make sure to print with the flat side down and the tab facing up.
These ladders are to scale with Mattel's WWE Action figures and come in two sizes, corresponding to an 8ft (2,5m) and 12,8ft (3,9m) high ladder when stood up, respectively. Yes, this ladder actually folds! Both heights feature linkages,…
UPDATE: For your convenience I have now added pre-coloured .3mf files at a whopping 520% scale, you'll need to add supports yourself and you can down-scale in slicer if you wish. 😁 ( I have not included the Base ). This was done for the…
Ladder for tabletop games scenery. Comes pre-supported for resin. —————————————————————————— Hey everyone! I wanted to share some exciting news with you - my first Kickstarter campaign for Gracewindale: The Gatehouse 3D Printable Scenery…
simple, basic lid raiser for Creality K2 plus now in Version 3 The following I copied from Original https://www.printables.com/model/1169180-lid-raiser-for-creality-k2-plus-2025-02-22-added-v Raises the glass lid by 40mm so that the…
Hand out goodies with STYLE during Spooky Season! Leave on display or as fun snack bucket the other seasons. This life sized skull and brain was remixed and designed for good printability and handling when on the go. Adding lighting to…
Modified this model to Include some clearance around the rear hinges, as I found that the case wouldn't open properly. Both the top and the bottom files have been modified, however, the original clip works fine. Happy printing : )
Inspired by fluttering dragonfly birthday cards, these hearts are a fun way to add a little extra surprise to your valentine's day card. Word of caution, if your partner startles easily give them a little warning. I don't want to be the…
Captain Jack Sparrow from Pirates of the Caribbean with base.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I searched (and searched and searched) for a laptop stand to meet my needs, but…
A miniature ladder with 5 steps. The default (assembled) size has 90 mm in height. It's also the minimum size assumed. Note: The “spreader” parts could be fragile or hard to join with other parts especially if there are deformities. Some…
Gridfinity AAA Battery 1x1x3 or 2x1x3 created using Onshape adjusted battery diamenter. Added step files for easy changes.
Note the pointed tip of this sleek towel hanger design, that does not care for the presence of a hanging loop! Save yourself the time of looking for the side of the towel with the hanging loop and just hang it up. Orientation doesn't…
Update: Created a version 2 based on feedback. I've left the V1 version in the files if anyone is interested and the instructions still apply for that one, it is only slightly different for V2. Changes for V2: 1.) Made logo larger to aid…
This is a pegboard mounted spanner/wrench mount. It's made to fit one of these ( https://www.amazon.co.uk/gp/product/B003BV77T2/ You may need to copy-paste the link) sets or it's equivalents. There's both a pegboard mounted version in the…
This torso and head will replace your Dummy13 torso and head. Best if printed at 150% or larger. The torso has all the connectors printed inside so it is one piece. You will need the neck and head mount for the Xenomorph head. I am…
This was inspired by Zack Freedman's Gridfinity project. My take on a USB-A & USB-C holder for Gridfinity. I created using Onshape . Added step files for easy changes.
A remix of the sign by wedgeworks , but with support for optional screw mounting, and a redesigned look. The sign is best printed with mmu3, but it's possible with a layer change at the start of the text, the only downside being that…
Use PLA+ or better. Print Settings: Layer Height: .16mm Walls: 5 or more Infill 32% or more Use supports Non-Printed Hardware Needed: 1x Allen Head Screw, 1/4-28 x 1" 1x Steel Star Washer 1x Safety Selector Detent Pin 1x Safety Selector…
ladder height 12 levels of lego duplo and 11 levels. ladder without handrails for easest printing. Print instructions I recommend turn ladder by 121.218393 degrees to x axis before printing.
Print with non-toxic PLA filament diagonally across the print bed. If resizing, measure to ensure that the newly sized end loops fit within your cage's bar gaps.
Print at 100% scale for 1:14
designed this case to fit on the shelf in my safe. print the latch at 100% infill. you will need: 2 - m3 x 18 button head machine screws (for the hinge) 2 - m3 x 23 or 25 button head machine screws (for the latch and the latch catch)…
One more for the CSHMFSEU (Clockspring3D/Hot Makes/Filament Stories Extended Universe)! Presenting an ambulance remix of the awesome Hot Makes/Filament Stories Flippy Ladder Firetruck to complete the first responders set. Original…
Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral: https://unstoppabledomains.com/r/cc353d5f40d64e8 Visit my website:…
The case reuses the screws from the deathadder. The shape is inspired by the new razer deathadder v3, for users with a palmgrip.
My little brothers wanted a ladder to play with their wwe action figures with. It can be printed with no supports. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Yes Supports: Doesn't Matter Resolution: any Infill: 20…
Thank you Marko Borsic for the original design and Boris Cvjetkovic for the remix with the clip. It worked great for me but sometimes the 6mm Bowden tube could pull out with little pressure when slightly moving my polymaker filament box.…
Needed a replacement for a buckle that was broken. Works well with 23x1.3mm straps.
The ellipse widens the bladder and causes it to be better ventilated and thus dry faster. The formation of bad odors is reduced and can thus extend the life of the bladder. The ellipse was designed for the use with a 2 liter water bladder…
A remix on my AirTag Buckle design. I added gaps to the buckle to make it compatible with a wider variety of straps.
Every firetruck needs a police car buddy so I designed this remix of the awesome Hot Makes/Filament Stories Flippy Ladder Firetruck by Clockspring3D. Prints on its side without support just like the original. Original Clockspring3D Flippy…
It's a buckle with quick side opening and with Pin-Lock or Ladder-Lock for 24mm wide straps. The special feature is that the buckle can be mounted without having to cut the loop band. Due to the screw used as a retaining pin, the buckle…
had issues with the leadscrew binding so i added a place to add an extra bearing
Added a fourth larger tool box. All boxes can be printed with Bambu. The boxes are attached under the legs of the AMS unit. Printed without support, up side down. The printing time of the largest is about 4 hours
It needs two screws with a cross section of 5 mm and a body diameter of 2.5 mm Update: New model (v2) added with less filament consumption. In the new model, the triggers do not hit the wall and there is also a space to attach a bumper so…
My ladder buckles on my backpack broke, amazon would not replace the backpack but gave me a refund. I didn’t want to throw away the backpack so I looked around for a replacement part, but ended up designing my own. I will try the buckles…
Remix of school cone stand (added stars) / Schultütenständer (mit Sterne)
Equipment ladder, great for tall structures such as silos, tanks, conveyer system and what ever you see a tall ladder on. Replacement ladder, we have all broken at least one! Print it, cut it to size, paint it and install it. Available in…
Install 6mmx2mm magnets in the holes, and then place a little ladder on your vehicle of choice, make remarks to your friends with 4Runners about their ladders
Remixed from: Functional Cobra Buckle https://www.thingiverse.com/thing:1656297 A remix of the functional cobra buckle print as I needed dual ladderlock for a backpack waist strap. For use with 1.5 inch wide webbing. Use M3x10 or m3x8…
Prints really nice. My tip is to use hot melt glue set on High Temp to glue these in. With PLA the heat from the glue softens the PLA on the gums to give a great fitment for the teeth. I think the bridging could use some support so I…
Some simple stakes I made for planting my new seedlings. I may create more as needed or requested. Dimensions are 25mm x 180mm x 3mm (the pointed part is 60mm long). Current files available: Peppers Tomato Spinach Cucumber Basil Cilantro…
UPDATE oct 22th , 2025: Check out new folder with updated files, requested files… *********** Must be printed with supports on the the build plate for the base. No other supports needed. BASIC GRIP is just a slim grip with the preferred…