1,397 models
This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for one variant
Print instructions: I printed all the tools in PLA and they're holding up perfectly fine. The ideal thickness of the caliper alignment tool is 0.35mm. So set your first layer to 0.2mm and print with a layer height of 0.15mm. I printed…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Honda/Acura Clutch Alignment Tool B-Series Engines B16/B20/B18
Print approx. €1.56–€1.90 excl. taxPreliminary estimate for one variant
Würth Abrasive Disc Holder and Alignment Aid Introducing the Würth Abrasive Disc Holder and Alignment Aid – for a better (looking) work flow! Storing all your abrasives neatly and easily accessible has never been easier. Grab the right…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
This print was inspired by a few similar models, but none of the ones I tried worked all that well. In particular, they all had one or several of these problems: Correct threads alignments. This knob screws on and off with ease, whereas…
Print approx. €5.29–€6.47 excl. taxPreliminary estimate for PETGSource material: PET
This is a super simple, small and quick bed aligner that works with any printer! Just attach some double-sided tape or glue to the bottom and you're good to go! There are liners for the side and corners, so no need to worry about the bed…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Alignment aid for the laser beam. Model is for the well-known "China Laser". Can be used for 25mm mirrors. Simply insert the assembly into the opening of the laser head and slide in the target, which is included as an SVG file. All prints…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
I took the xtool honeycomb riser by cbabbman and increased the thickness and size so that it would have a better hold on the honeycomb panel and also slightly increased the gap between the honeycomb and the stainless plate and increased…
Print approx. €8.42–€10.29 excl. taxPreliminary estimate for one variant
Alignment aid for the laser beam. Model is for the well-known "China Laser". Can be used for 25mm mirrors. Simply insert the assembly into the opening of the laser head and slide in the target, which is included as an SVG file. All prints…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
This printable lid turns a large plastic jar into a screw dispenser. Just flip it over and give it a good shake. The shape orients the screws so that they can fall into the slot at the bottom ready for you to take them out without poking…
Print approx. €6.51–€7.96 excl. taxPreliminary estimate for one variant
Fits around the finboxes of the two center fin halfs
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
The popular introductory level mycology guide found at r/unclebens recommends using Ikea Samla 4 qt boxes and lids for spawning mycelium to bulk. During the fruiting stage, the lid is flipped and adjusted for airflow. These clips snap…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for one variant
This is a remix of @Extrutim's excellent extruder indicator/visualizer that stays centered and uses press-fit magnets.
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Add a new component to the original model to align the Stabilos. I hope you like it!
Print approx. €3.43–€4.19 excl. taxPreliminary estimate for one variant
Attached at the corners to help when replacing the screen, when it's all done and the screen will be pressed into the new adhesive, this is to help keep it straight. I haven't tested it, but because the screen for the Surface Pro 4, 5,…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Set the sundial to 12 o'clock & wait for the sun to come around every day to alert you when it hits the “noon mark”, or set it to sound off at any other time, for that matter, during sunny days. Essentially, this sundial works as a solar…
Print approx. €0.52–€0.63 excl. taxPreliminary estimate for one variant
Tool for making perfect 90 degree drill holes
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
Designed for creality 500x500 honeycomb with rubber corners. This version centers the honeycomb within the mechanical axes, it has four unique feet for the Right Front, Left Front, Right Rear, Left Rear. 500x500mm is larger than the…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
Short alignment block for Benchdog MFT Quad Hinge Table Plates
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
Allows elevating your feet to squat instead of sit on the toilet. For details, see Squatty Potty's sales page . Pictured print is in ZYLTech Yellow PETG .
Print approx. €29.18–€35.66 excl. taxPreliminary estimate for PETGSource material: PET
This is a clip-on cover for the cable connector that goes to the bed of the Kobra 2 Pro . It should also work on the original Kobra 2 and the Kobra 2 Neo . The cover is meant to act as a bed aligner. It is also easy to put on and remove…
Made this to be able to put the bed back in place more easy and add a cable chain on my neptune 4 plus Thanks to: scrogathon & Matt Queen & Sascha and Berry C & Daan87423 They Helped me a lot for making the mount possible on the neptune 4…
Easy Install version Snap-On set of bed sheet aligners. Compatible with factory bracket, Also Strain Relief & Cable Chain Anycubic Cable Drag Chain Anycubic Strain Relief PETG Print with 15% to 20% infill. Left Mount needs support:…
Description: Creality K1 XY axes alignment tool. Update: Added alignment tools for K1 Max. It will help keeping the axes perpendicular while adjusting the belts. Also it will keep the X gantry at 150mm from front pulleys so you can adjust…
Back Left Mount V3 Now compatible with Cable Drag Chain OEM Strain Relief Installation: 1, Hook the bottom corner under bed of OEM bracket first. 2. Hold the corner you hooked bring it around the bed. 3. Then press down on top of bed…
Here you will find really basic alignment tool for 2020 profile with the MGN9 & MGN12 linear rails. Proper alignment of linear rails especially on a 3d printer is VITAL to help give your 3d printer the best chance of both working &…
Simple alignment test, single layer 0.25 mm, 0.4 mm extrusion width. 190x190 mm. Solidworks source file included Category: 3D Printing Tests
Designed these to make lining up the build plate easier on my Neptune 4 Max. Not sure if these will fit on different model Neptunes as I only have a 4 max. Both sides mount using stock screws. Parts are tight so some force is required to…
I designed a little leadscrew alignement tool, since I found it difficult to align these with the top when the bed is in lowest position. This one is for the 2 front leadscrews. Move the bed to lowest position , unscrew the trapezoidal…
There are 2 versions: The regular, if you love simple things. The clip, more useful in vertical configuration, especially if you need it to stay fixed without holding it with your hands. Every stl contains both versions in order to limit…
Scaled the original part up a bunch to save a step, and added 3 holes to use for alignment. Print two copies, one mirrored. Remixed From: Alan Grant's Raptor Claw by SagaWorkshop Print instructions Cut three small pieces of filament,…
A very simple too for aligning your laser head (40mm x 40mm square diode laser modules) to your workpiece. It allows you to quickly establish the origin at the corners of your material without having to test fire your laser. Just butt the…
Very simple alignment gauge for mounting an MGN12 on a 2020 or 3030 extrusion. Will work on any 20mm or 30mm T slot extrusion face. Put the linear rail on the extrusion with bolts fitted, place a few of these over the rail / extrusion and…
Hi guys, My name is Lau, a content creator, design engineer, and passionate with 3d printing. Welcome to check out my youtube channel: I made 3d printer reviews videos, tutorial, mod, and more.…
I created an easy alignement tool for the back leadscrew of the Prusa Core One. After I finished my build of the Core One I tweaked the front leadscrews using the little helper from user @rinkel.…
Tool to align magnetic bed sheets, kinda like the stop pins on the Prusa MK3. Supports decontaminator nozzle brush . Fits Voron 2.4 250, 300, 350. What you need: 4x M3x8 SHCS 4x M3 2020 T-Nuts or M3 2020 Hammer Head T-Nuts (You should…
Back Left Mount v2: includes 2 different options for mounting. (updated 11/29/2023) One with larger holes for M3 heated inserts. One with smaller holes for a through bolt to add a locknut. Can be used with or without a strain relief. Back…
This is a remix of the Enterprise E model from here: ( https://www.thingiverse.com/thing:599139 ). My example model was printed in 2 big pieces and afterwards painted with acrylic color. Pre- scaled and optimized for prusa printers will…
Very quick remix of my original hook, but with an anti-rotation feature to keep things from swinging. Prints on it's side with no supports. Recommended to use 100% infill and use PETG or similar stronger material if you plan to hang tools…
Creality K1 & K1 Max Universal Build Plate Alignment Stops This will allow you to use just about any build plate you like with your K1, K1 Max along with other Creality printers that use this same setup. Here is a video explaining how it…
I printed this in Polymaker PLA, at 100% infill. I heated the ends a little bit to make it go on nicer but it works like a charm! If you will be printing with PETG or ABS, I recommend printing it in that material. I printing in PLA since…
Alignment Square for honeycomb beds with adjustable sliding pins to allow proper fit in different orientations. This product also features hurricane pins to allow for a snug adjustment to lock into place once oriented on the bed. Great…
The most efficient way to correct small imperfections in bed alignment. Recommendations : Print on ABS Versions : height of 0.20 height of 0.30 height of 0.40 adjust the height yourself.
BTT SB2209 CanBus boards unfortunately have a design flaw that makes it easy to misalign pins in the board to board socket, leading to voltages being delivered to the wrong places. This can ultimately result in damage to electronics, such…
Aligment tool for SPD SL cleats. Category: Sport & Outdoors
I, well, I didn't really need these, masking tape and center marker works just fine, but I wanted these. So after browsing a bit I gave up and opened the Fusion 360 and just made a model myself. This may not be exatly perfectly as what…
This is a tool to align the clutch when installing it to the flywheel. It aligns the clutchplate against the pressureplate. There is 3 different sizes of expanders to fit diffent clutches. You need 1 M8 bolt that is 120mm long and one M8…
20mm x 40mm MGN12 Linear Rail Alignment Tool for the WorkHorse 3D Printer but this tool can be used for any 20mm x 40mm frame extrusion and MGN12 linear rail.
I tried the original design several times, but it kept breaking on my during install. The tabs would snap off or it would split at the layer lines. I probably could've scaled it very slightly to work, but I wanted to give this a shot…
Version(s) V1.0 - 21Nov24 - Initial Design ---- Description It helps keep monitors nice and aligned. Also, you can gift to colleges who are lunatics with monitors at various angles to each other :) Use a bit of 3M tape to attach to…
A copy of the Invisalign aligners case. Each hole fits two 5x2mm magnets.
Ensure precise alignment for your magnetic build plate with these guides! Never worry about misalignment again. No screws and no need to remove the build plate at all. This 3D print guarantees a perfect slide into position every time,…
Simple alignment tool to install MGN12 rails on 2040/4040 extrusions. Printed myself with PETG-CF , because I was lazy to change filament, but all other filaments should be fine. .STEP-file included, if you want to edit the model. If you…
Edit 17.1.2023: Added optimized model with longer base and some extrusions to fit into the frame so it is more stable and easier to use. This is simple alignment tool that you preferably need when upgrading to dual Z axis to…
This basic tool help checking the axes alignment after a disassembly. Ensure You are printing it on a not skewed printer. How to use: Raise Z axis over 100mm from home Insert the base fork in the Z Axis rod and insert the Z lock then…
A blocks/handle for sanding paper size 93x115 mm (1/6 standard sheet) Mod aligning top and bottom part of sending
Lens Mod Instructions Note If your adapter piece doesn't fit the jig, you might have the slightly different version that's more square. Thankfully, the ever helpful @Tokyo_Dom_663158 made an alternate version of the jig for those!…
XY Nozzle alignment camera using OV9726 camera module. This case snap fits around the module and uses 4x 6x3mm magnets to keep the camera on the bed. OV9726 camera module 5V 3mm round white6000-6500k LEDS When soldering the LEDs take note…
After trying some of the other options I'd seen online I wasn't particularly happy with the ergonomics of any of them and I definitely didn't like using bolts or dowels to make a simple hinge. So I sat down and taught myself enough Fusion…
IMPORTANT : as I don't have an original Kobra, this was not yet tested. If you print it and it works, please post a make and a comment so I know if It works, if I need to improve something or take the model down. ------- UPDATE : based on…
Holds alignment stick at different angles. Held in place w/ standard golf tee into ground. Can be swiveled around. 0, 45, 47.5, 50, 52.5, 55, 57.5, 60, 62.5, 65 degrees Stick hole diameter is 8.5mm Tee hole diameter is 6.5mm Lightweight -…
Make sure the print bed goes on straight every time! Make sure to use supports for the right build tab
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- This tool is designed to assist with the proper alignment of the Belt Tension Tool used in 3D printers. It ensures…
DESIGNED ONLY FOR CREALITY 500X500MM HONEYCOMB WITH RUBBER CORNERS. There are many alignment feet here, but none that fit Creality's updated honeycomb with rubber corners. These alignment feet center the the honeycomb and the metal sheet…
Use this model to help align your OpenGrid panels while mounting. Use with or without the little connector pins. Use on corners, edges or both. I managed to make it work with just one that I moved around as I screwed the panels in.…
The Anycubic ACE Pro works great but, in some cases, could produce some false filament feed alerts or clogs. This mod could reduce to almost zero when you use cardboard spools or when your spools are near to being finished. Two versions…
D100 dice with key for alignment
With the use of a cheap digital tyre depth tread indicator, you can easily build a jig that will measure your tablesaw blade's runout to two decimal places of (insert your favourite unit of measure.) I'm not sure whether I have the skills…
Elevate your bead crafting with this duo for standard-sized beads! Showcase Bead Buddy Aligner: Quickly aligns beads with a simple 5 second shake. Saves time during bead prep. Tweezers: Enables precise placement of single beads on your…
Print with PETG at 100% infill should take about 30 minutes. please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
This is a remix of the mandalorian helmet base by Erazo: https://www.thingiverse.com/thing:3973248 I added the ears and the back vent. the helmet is split up into multiple pieces, which can be connected with 3mm rods. I also scaled the…
1.PRINT IT 2.SNAP IT 3.ROTATE IT 4.PRINT ANYTHING BETTER Stop squeaky noises, mesh bed leveling errors, Z wobble, Z axis errors on the Prusa mini+. No tools needed to install this printer upgrade. It might seem useless for some, but I…
These are just simple blocks you can shove behind your Z axis motors on the bottom side to true up the angle with the metal uprights. See photos for what I'm talking about. I noticed mine were greater than 90 degrees and this seems to…
Aligning the build plate made easy! Two corner brackets (print more of the standard bracket for the front locations if required), incl. custom fit for rear left on the Elegoo Neptune 4 Pro where the Cable connection lives. Triangulated…
QUICK ALIGNMENT STOP TO LOCATE THE MAGNETIC BUILD PLATE FOR THE ELEGOO NEPTUNE 3 PRO. REPLACES BACK RIGHT BED SPACER. MUST RUN AUTO BED LEVELING AFTER INSTAL NO SUPPORTS NEEDED. PRINTS FAST MAY HAVE TO SCALE =/- DEPENDING ON YOUR ADHD/OCD…
Clutch alignment tool for BMW fine spline clutches. Spline is 32,5 x 35 - 26N this tool is compatible with clutches for gearbox: GS6-53 D Z - Diesel GS6-53 B Z - Benzin/Gasoline GS6-37 D Z - Diesel GS6-37 B Z - Benzin/Gasoline These…
This is a magazine for the easy rapid allignment of standart 125mm 8-hole oribital sanding discs on random orbit sanders. Works great for my Bosch GEX 18V-125. Take a look at the video below for a functional demo. Inspired by…
This will center your Shimano 105 / Ultegra and Durace 11 / 12 spd calipers perfectly to the rotor. Slides in from the top once pads are removed, make sure you have pushed in your pistons first (this is also a good time to lube and check…
Creality Falcon 2 laser cutter Honeycomb with Pegs This jig aligns material with laser movement It also allows placement of subsequent material in the same place for repeated production.
I created an aid to help with rough polar-/daytime polar alignment for the Skywatcher Star Adventurer 2i. simply replace the batterie cover with this 3d printed version, put the phone in the phone holder and run software like “PS Align…
This is a remix of AT-AT Dad Joke by TK42Fun on Thingiverse. The remix adds alignment pins for the head and legs to make it easier to assemble. I'm setting the license to CC Attribution, matching the license from the model I remixed. This…
Stop the noise from moving your Z-axis! Printed part that will only need a rotate and snap in place to keep the lead screw aligned in the middle of the Z-bottom hole assigned. It might seem useless for some but I needed it for 1 of my 2…
I had issues with the stock alignment guides because they had play or didn't fit both the alu extrusion and linear rail so I designed complaint ones so they are a lot more forgiving in terms of accuracy on your old printer. this is the…
THERE IS A NEW VARIANT AVAILABLE https://www.printables.com/model/1028469-voron-trident-110mm-y-alignment-guide-jig-v2 A 110mm alignment guide for the VORON Trident. Print 2 pieces. Material doesnt mater as long as its not TPU Step File…
Align Jig Fiber Laser Fixture Set
Quickly align your stem and handlebars with the front tire in a accurate-ish way. Place it on the handlebars, get it roughly centered, and use the top groove as a “sight” to center it on the front tire. I saw the original on the Berm Peak…
These guides makes it easier to align a magnetic steel sheet onto an Ender 3 or similar printers. Compared to previous model, this has a tighter fit, and I added more space for the wiring. I made an alternate rear-right model for…
Tool to quickly and accurately align the table saw top to the blade and fence to improve the quality of cuts and operation of the saw. Miter bar fits the standard ¾" miter slot common on cabinet style table saws. Should work fine with…
Version 2 is stiffer and works a bit better! If you have Invisalign, Smile Direct, or other aligners, it can be difficult to remove them sometimes -- especially if you have attachments that increase the tension in the aligners and create…
This is an alignment clamp for attaching sublimation paper/stencils to 20oz sublimation tumbler blanks. To put the two clamp pieces together you need a single metric M5x10mm bolt and nut. The clamp has spaces for attaching rubber grips. I…
Build plate aligning corners for the Neptune 4 Pro (or similar). Had to be very minimal to avoid the components for heated bed and the fan shroud above. Sticks out just enough align the magnetic plate.
Aligning your stem can be difficult! There are a couple stem alignment tools on the market, but are generally expensive. This tool will work great to achieve a no-worry alignment. I used a .16mm layer height without any buildplate…
This model is simply 2 different models assembled in Orca Studio. I wanted stackable sanding disc holders, but I always wanted some guiding posts so I could press the sander down onto the discs and end up with aligned vents. For this…
This is a pair of "legs" that will hold the x-gantry perfectly level while you adjust it. This video from Alex Kenis will show how it can be used instead of the CD cases he uses. You don't need it, but I used the knob, an m3 bolt and…
Leg locators for Elegoo phecda laser to give defined location, also height adjustment using 2mm pins, allows you to leave the additional risers fitted if used with honeycomb corner locators. Corner location for honeycomb bed again with…
This is a guide for aligning the build plate on the Bambu Lab A1 printer I designed in Fusion 360. I have been having problems getting my build plate perfectly straight on my new A1 printer so I designed this to clip on to the right rear…
I was inspired by the " Dental guard box " by KeepTheBOX , however I wanted a few changes so I redesigned one from scratch. Main differences: This one is smaller, has shorter bridges in the hinge, no filet on the underside, thicker…
