Search results: ape

Sort order

20,752 models

P
PrintablesThreeD-Michael

Optimized Bed Scraper XL

News 2024-04-10: Please also check out my new Blade Dispenser for this Bed Scraper: This is the XL version of my popular Optimized Bed Scraper with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer! Each blade…

Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant

Downloads
79,553
Likes
16,343
Rating
4.88
P
Printablessh

🟠 Thin layers scraper (tiny+ergonomic)

UPDATE 3.1.2023: added V2 version with different inner shaping → same external size & characteristics, quicker print Info: 🟠 round edge → longer edge → scraper lasts longer then other spatula types scrapers if it is less sharp on one…

Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant

Downloads
38,008
Likes
10,648
Rating
4.88
P
PrintablesLuke's 3D

Hexagonal paper towel holder

Hi guys, designed this simple nice hexagonal paper towel holder for my kitchen. Four versions available: with holes - you want to screw in the holder to the bottom of your cabinet for example without holes - you want to stick it to the…

Print approx. €6.43–€7.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25,203
Likes
8,576
Rating
4.89
P
PrintablesMiguel M.

Tape Dispenser, Multi-size/Modular

This is a Modular and multi-size tape dispenser. I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes? I refined the design, corrected a…

Print approx. €1.02–€1.25 excl. taxPreliminary estimate for one variant

Downloads
8,814
Likes
4,733
Rating
4.89
P
PrintablesCelta

Toilet paper holder

Want to hang the toilet paper? I got you You never know where to put your phone when on the toilet? I also got you Introducing, the never seen before (not really), toilet paper holder with a smartphone holder. Gone are the days when you…

Print approx. €7.45–€9.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,566
Likes
780
Rating
4.85
P
PrintablesFusedForms

Interchangeable Blade Bed Scraper / 3D Printable Blades

A useful tool for removing prints from the bed with interchangeable 3D printable blades for when one eventually wears out. You can print the body in either PLA or PETG, however for the blade PLA is highly reccomended. To install the…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
4,847
Likes
1,275
Rating
4.83
P
PrintablesMichael

Razor blade scraper

A scraper using simple razor blades which is not flimsy or imprecise. The blade is held firmly in place. Please be careful when inserting the blade. Strongly inspired by https://www.thingiverse.com/thing:2024019 Use razor blades such as…

Print approx. €1.12–€1.36 excl. taxPreliminary estimate for one variant

Downloads
4,243
Likes
596
Rating
4.81
P
Printablesluczjanoo

Black Sheep - Toilet Paper Holder for your Bathroom

This is actually my wife's idea and I made it for her. She needed toilet paper holder. Looks fantastic fully loaded by white rolls. Happy printing! Print instructions This design fit on typical MK3 heat bed 25x21cm. Body is made with two…

Print approx. €3.00–€3.67 excl. taxPreliminary estimate for one variant

Downloads
3,826
Likes
1,713
Rating
4.98
P
PrintablesSaphir

Coin roll helper with coin roll paper templates (euro)

When I was looking for templates for printing coin roll paper for private use, I noticed that there were no templates to be found anywhere. So I quickly created some myself. These are print templates for private purposes, so the sizes are…

Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant

Downloads
3,762
Likes
88
Rating
5
P
PrintablesChriswak

Minimalist Quick Change Toilet Paper Roll Holder

From original author description: It takes about 5h to print all parts at 60mm/s, uses only around 50g of filament at 20% infill, and can easily be printed on any 3D printer as the shapes are very simple, with no bridges and maximum 45°…

Print approx. €4.48–€5.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,370
Likes
489
Rating
4.9
P
PrintablesBen

M2 - M22 hex-shaped Nuts (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of hex-shaped nuts, ranging in size from M2 to M22. Looking for Torx, Hex, or Phillips screws – with or without heads ? Or maybe square-shaped…

Print approx. €0.03–€0.04 excl. taxPreliminary estimate for one variant

Downloads
3,346
Likes
1,285
Rating
5
P
PrintablesFAYRON

Voronoi Printbed Scraper [2]

The CIUNCARELLO Voronoi has a distinctive Voronoi design that sets it apart from conventional bed scrapers, making it one of the BEST Accessories for your 3D Printer. It features an additional circular ring at the back which serves a…

Print approx. €2.19–€2.67 excl. taxPreliminary estimate for one variant

Downloads
2,669
Likes
106
Rating
4.83
P
PrintablesWesty

Lightweight Poster Paper Backdrop

This two part lightweight and simple model is ideal for 22" x 28" (550x700mm) Poster Paper you can find at your local hobby store although any size will work OR standard printer paper ! Whether you are shooting 3D model pictures on your…

Print approx. €2.24–€2.74 excl. taxPreliminary estimate for one variant

Downloads
2,544
Likes
556
Rating
4.84
P
Printablesfifindr

Photo Paper Backdrop Stand (A4)

A simple stand that turns a regular sheet of A4 paper into a seamless "infinity" background for photographing small objects. The paper slides into the side supports, creating a smooth curved backdrop without visible corners. The side…

Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant

Downloads
2,212
Likes
1,344
Rating
5
P
PrintablesBuilderDadDan

4 Roll Tape Holder for Packaging and Utility Tape

This 4 Roll Tape Holder is a convenient storage solution designed to hold four rolls of packaging tape, keeping your workspace tidy and tape easily accessible. I personally use it for various types of tape, but it’s sized perfectly to…

Print approx. €3.76–€4.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,207
Likes
844
Rating
4.86
P
Printablesfifindr

Mini Toilet Paper Buddy

This Mini Toilet Paper Buddy is the tiniest roll of TP you’ll ever need! 🧻✨ Perfect for adding a touch of humor to your desk, shelf, or workspace. ✅ Super Small & Funny – A tiny toilet paper buddy for any occasion ✅ Perfect for Gag Gifts…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
2,018
Likes
354
Rating
5
P
Printableseyalshtark

Actually useful Sheep and Goat toilet/tissue paper roll holder and dispenser

UPDATED STL FILES An actually useful remix of the classic toilet paper holder. This one can actually be used to dispense the paper. A fantastic gift to give to your friends. Printed from black PETG. I use an epoxy glue to connect the…

Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,582
Likes
482
Rating
4.8
P
Printablesbene

Mechanical Clock Escapement with Balance-Wheel

Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant

Downloads
1,554
Likes
231
Rating
3.9
P
PrintablesEmkatech (Mike)

Simple Phone Stand – Support‑Free Print for Portrait & Landscape with Cable Pass‑Through

This versatile phone stand is designed to securely hold your smartphone in both portrait and landscape orientation. The geometry is fully optimized for support‑free 3D printing, ensuring clean results, shorter print times, and efficient…

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant

Downloads
1,377
Likes
194
Rating
4.75
P
PrintablesSASSy Design

Tradicional Triangle V shape pot and planter - vase mode

As some of you asked - we made the cilinder shaped triangle pot into a V shaped one! We hope you will enjoy it as much as we do :) Simple remix of the Tradicional Triangle Plant Pot and Planter Best to print in 2 or 3 layered vase mode…

Print approx. €0.92–€1.12 excl. taxPreliminary estimate for one variant

Downloads
1,318
Likes
276
Rating
5

HexScraper fast (18mins 0.6mm / 27mins 0.4mm)

Please compare the first photo with your slicer before printing. Make sure that your scraper head underside looks like photo 3. If it takes longer than 36 minutes to print, then something is wrong with the slicer settings. Optimized…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,276
Likes
272
Rating
4.72
P
Printablessh

📼 Cassette tape business card holder/case

Info: original-size casssette case with realistic tape lookalike design drawn on the case Print info: can be printed in place or separately, because as everybody knows - cassete cases can be dismantled and this in not an exception (with…

Print approx. €3.33–€4.06 excl. taxPreliminary estimate for one variant

Downloads
1,259
Likes
316
Rating
4.89
P
PrintablesEdgar.A

Infinite tape dispenser

Here is an infinite tape organiser and dispenser with two measure, 55mm and 30mm. All the pieces are 3d printed. I recommande you to not use the printer files it just an exemple to show an idee of time and mass that will use for this…

Print approx. €12.10–€14.79 excl. taxPreliminary estimate for one variant

Downloads
1,102
Likes
311
Rating
4
P
Printablesrbid

Yet Another Portable Photography Paper Backdrop Accesory

Introduction This model combines 3 hobbies I have: Photography - allows me to take photos. Hot Peppers - Allows me to take photos of beautiful hot peppers I grow in my garden. 3D modeling and printing - Have the joy to create stuff that…

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant

Downloads
1,007
Likes
209
Rating
4.78
P
PrintablesFormFitPrint

Diaper Genie Complete Replacement Lid - For Older Models

One of the hinge pins broke on the lid of my Diaper Genie Complete model diaper pail. I searched everywhere online for a replacement but none are available. Rather than buy a whole new $50 diaper pail and send this huge plastic…

Print approx. €7.37–€9.00 excl. taxPreliminary estimate for one variant

Downloads
969
Likes
31
Rating
5
P
Printablesstojagrozny

Aluminium/cling foil or baking paper holder

My goal was to create a simple model that requires no supports and would print in an acceptable amount of time. For this last requirement, I made the walls 1,8 mm thick (as I am using a 0,6 mm nozzle - you can safely set 0,6 mm line…

Print approx. €2.61–€3.19 excl. taxPreliminary estimate for one variant

Downloads
962
Likes
487
Rating
5
P
PrintablesSeppoTheFish

Paper plane glider, PLA based

Printing instructions: Add some extra veritcal shells to increase durabilitie of the wings Remove “Elephant foot compensation” to make the connection link at the tail wing work. Let the model cool down after printing. Removing it while it…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
911
Likes
116
Rating
4.71
P
PrintablesDominator

Scraper – All Versions: Effortless 3D Print Removal

As mentioned above, this handy tool helps you effortlessly remove your 3D print from the heat bed—because let's be honest, nobody enjoys the struggle of peeling off prints like they’re stubborn stickers. It’s also a lifesaver when your…

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
851
Likes
130
Rating
5
P
PrintablesMetikumi

Everyday Comb in a Classical Rounded Shape

I'm thrilled to share my latest creation: the Everyday Comb, designed with practicality and a touch of elegance in mind. This working comb combines ease of printing with the comfort of daily use, featuring a classic rounded shape…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
844
Likes
137
Rating
4.6
P
Printablesburtworks

Quilt / Tapestry Wall Hanger

This is a wall-mounted quilt hanger, based on a wooden design I've seen. It's simple, requires no supports, does no damage to the hanged item and looks great! All pegs can be used with all versions. V1 Simpler, and does not include hole…

Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant

Downloads
833
Likes
160
Rating
4.73
P
PrintablesjonnieZG

Printer Bed Scraper with Replaceable Printed Blades

LATEST MODEL Since 2025-07-13 I recommend using this model instead: Ultimate Magnetic Bed Scraper With Replaceable Blades This is a spatula for removing objects from the print bed, with easily replaceable printable blades. When one side…

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
813
Likes
64
Rating
5
P
Printablesapefred

toilet paper holder cloud 3 rolls

This is a simple wall-mounted toilet paper roll holder. It is mounted on the wall with two screws but has also enough surface on the back to glue it to the wall. This holder supports up to three rolls of toilet paper with a diameter of…

Print approx. €6.87–€8.40 excl. taxPreliminary estimate for one variant

Downloads
771
Likes
124
Rating
4.82
P
PrintablesThrorin

REMIX- Hexagonal paper towel holder (Threaded)

A little bigger than the original to accommodate a (1.1Kg) 22cm roll and Threaded Inserts. I made the design from scratch. I also changed the inserts from hexagonal to cylindrical with threads. This way rolling the paper should be…

Print approx. €6.34–€7.75 excl. taxPreliminary estimate for one variant

Downloads
744
Likes
90
Rating
4.94
P
PrintablesPeter Farell

Rosslyn Chapel Master and Apprentice Pillar.

Rosslyn Chapel Master and Apprentice Pillar.

Print approx. €6.81–€8.33 excl. taxPreliminary estimate for one variant

Downloads
734
Likes
113
Rating
5
P
Printableselectricyoshi

Tiny VHS Tape

This model is basically a stitched together and scaled down version of this giant VHS tape , but with a few added details to make things work at a smaller scale. Assembly Assembly is relatively straightforward, the two pieces go together…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant

Downloads
716
Likes
100
Rating
0
P
PrintablesUbermeisters

Paper Towel Holder - Suspended

Print, assemble, screw into overhead space. Slide roll in and down once the holders are in the roll. Pull up then out to remove empty core. Print instructions Print

Print approx. €11.35–€13.87 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
699
Likes
87
Rating
4.44
P
PrintablesGLeZz

Giant PaperClip because why not ?

Made this for reasons unknown. Print instructions The gcode is variable layer height for best result.

Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant

Downloads
686
Likes
114
Rating
5
P
Printablesmarty_shitless

Headgear Helmet Construction for vvk187 Lego Man Toilet Paper Holder

Construction Helmet for Lego Toilet Paper Holder Man by vvk187 - https://www.thingiverse.com/thing:1996077 Fits the NEWER version of Lego Man The Helmet is based on https://www.bricklink.com/v2/catalog/catalogitem.page?P=3833#T=C

Print approx. €4.69–€5.73 excl. taxPreliminary estimate for one variant

Downloads
666
Likes
127
Rating
4.75
P
Printablesckassoff

Georgia-Pacific paper towel dispenser key

I couldn't find a “key” that had both parts on it, so I sketched this one up

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
595
Likes
33
Rating
5
P
PrintablesMaxis_3D

Paper Cutter Knife with locking system | Easy to print |

(ENG) Hi, I present to you a simple 18mm blade paper kinfe designed for 3D printing. All parts are designed to be as simple as possible for 3D printing. The cutter also includes a blade locking mechanism, preventing accidental hiding or…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
595
Likes
92
Rating
5
P
PrintablesBaGooN

Minimalistic print remove scraper

This is a non spatula style scraper. Simple, Small, but functional and requires much less filament than a spatula-shaped scraper.

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
588
Likes
70
Rating
4.86
P
PrintablesWP_Master

Montessori kids game "Plate with shapes"

Another montessori inspired game for todlers to develop logic thinking and motoric skills. No special instructions for printing. As shown on the cover photo, print shapes 4 times with different color. In case of the base I used color…

Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant

Downloads
573
Likes
241
Rating
5
P
PrintablesShmoee

50 Percent Scale Watch Escapement Desk Toy (M2 screw compatible)

Update 2: 8/2/2022: Success! I no longer consider this effort a work in progress. This design can really work great once you get it assembled and know what to do to get it running excellent. It is very satisfying to watch it start itself…

Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant

Downloads
568
Likes
108
Rating
4.43
P
PrintablesOndra

Cookie cutter in the shape of a Christmas tree

Cookie cutter in the shape of a Christmas tree with a star. Christmas theme. Suitable for baking Christmas cookies. Vykrajovátko ve tvaru Vánočního stromečku

Print approx. €1.25–€1.52 excl. taxPreliminary estimate for one variant

Downloads
521
Likes
55
Rating
5
P
PrintablesAaronOaks

Gridfinity Dymo 160 Tape Holder

Holder for Dymo LabelManager 160 label tape, compatible with the popular Gridfinity organization system. More details on the Gridfinity system:

Print approx. €6.22–€7.60 excl. taxPreliminary estimate for one variant

Downloads
460
Likes
68
Rating
4.94
P
Printablesbeiinjamiin

LEGO Figure Toilet Paper Holder

Fully movable huge Lego Figure as a toilet paper roll holder Scale ~10:1 individual movable arms, hands, legs and head (depending on your printer settings & quality you should use different shoulder parts to ensure the arm is turning…

Print approx. €16.16–€19.75 excl. taxPreliminary estimate for one variant

Downloads
451
Likes
145
Rating
4.33
P
PrintablesOndra

Cookie cutter in the shape of a Christmas comet

Cookie cutter in the shape of a Christmas comet Vykrajovátko na perníčky ve tvaru Vánoční komety

Print approx. €1.14–€1.40 excl. taxPreliminary estimate for one variant

Downloads
405
Likes
44
Rating
5
P
PrintablesPublic Products

Better Than Toilet Paper in a Pandemic - a Bidet

-----Updated March 22nd, 2020 V1.4, new improved larger radial grips and more powerful spraying nozzle size----- This is a simple portable bidet that is to be attached to a standard plastic disposable bottle. Let’s give people in our…

Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant

Downloads
404
Likes
48
Rating
5
P
PrintablesMajkl

Reinforced KUT EDC Tool Version (Utility Knife + Scraper + Wire/Cord Cutter)

Cutter with scraper, remix - reinforced version. I have printed this with PETG 0,15mm or 0,2mm layer height and 5 perimeters (4 is enough). Printed on MK4 without Input Shaper to make it strong.

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
404
Likes
72
Rating
5
P
Printablestom

Einstellbare Bohrschabone System 32 für Möbel/ Adjustable drill scraper System 32 for furniture

Aktualisiert am 20.11.2023: Neue Version "Ausrichtbolzen mit Sechskant" hinzugefügt. Jetzt können die Schrauben ohne zusätzliches Werkzeug angezogen werden. Updated on November 20, 2023: New version "Ausrichtbolzen mit Sechskant" added.…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
385
Likes
109
Rating
5
P
PrintablesKcallit

Schleifklotz / Schleifpapierhalter / Sandpaper holder

Ich habe hier einen Schleifpapierhalter für meine Baustelle konstruiert. Die obere Klemmplatte besitzt Noppen, welche sich durch das Schleifpapier bohren, welche den halt nochmals verbessern. Die Schrauben habe ich als Rändelschrauben…

Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant

Downloads
354
Likes
41
Rating
5
P
PrintablesHeikit

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
346
Likes
99
Rating
5
P
Printablesondra_1121

Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant

Downloads
307
Likes
48
Rating
5
P
PrintablesFlorianMayerle

Robust tablet holder (I-Pad) for home bike or trainer (landscape or portrait)» #NoSupportNeeded

Universal tablet mount for home trainer bikes or similar. There are two versions available to download, one for landscape and one for portrait. Only two parts differ for the two versions. In “Other Files” you will find the Assembly…

Print approx. €9.90–€12.10 excl. taxPreliminary estimate for one variant

Downloads
301
Likes
42
Rating
5
P
PrintablesJakub Kříž

Red Devil Ice Scraper

Tired of scraping ice with a boring old scraper? Upgrade to the Red Devil Ice Scraper and watch that frost disappear faster than you can say 'hot damn!' Sacrifice some high-quality filament such as bloody strong Modified PLA, ASA or PETG…

Print approx. €2.29–€2.80 excl. taxPreliminary estimate for one variant

Downloads
281
Likes
28
Rating
5
P
PrintablesApex23

Ikea Skadis holder for Tamiya Masking Tape dispensers

Organize 18,10 and 6 mm Tamiya Masking tape dispensers on your Ikea Skadis board. See also my other designs for more ways to Organize your Tamiya tools on the Skadis board.

Print approx. €5.00–€6.11 excl. taxPreliminary estimate for one variant

Downloads
276
Likes
34
Rating
5
P
PrintablesFranky 71

Drapeau de Sécurité pour Chambre Vide - Safety Flag for Empty Room

Drapeau de sécurité Carabine Ce drapeau indique que votre arme à feu est déchargée et ne présente aucun danger. Avec sa couleur orange, cette étiquette est très visible et rassure l'ensemble des personnes présentes et les autres tireurs.…

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
268
Likes
11
Rating
5
P
Printableshvrkh

Christmas Cookie Cutters - All Shapes in Less Than 50 Minutes

Description Get ready for Christmas baking with our Christmas cookie cutters model! This set includes all the essential shapes you need for your holiday treats. Each cutter is 50 mm in size, with a height of 10 mm and a thickness of 0.8…

Print approx. €0.89–€1.08 excl. taxPreliminary estimate for one variant

Downloads
263
Likes
39
Rating
5
P
Printablesxyz

Hooks for Pleat Curtain Tape

Introducing our 3D printed hanging hooks for curtains and blinds with pleat curtain tape. Designed as an alternative to IKEA RIKTIG. Available in three different variants. Two variants allow for parallel or perpendicular hanging of…

Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
259
Likes
18
Rating
5
P
Printablesonus

Basic - Tapered Candle Mold - 6in

Pretty basic idea: 6in Tapered Candle Mold. Just print both halves, bottom up with organic supports - to hopefully produce as smooth a mold as possible. Should produce a tapered candle about 6 inches long with a ¾ inch base. I'll post…

Print approx. €4.75–€5.80 excl. taxPreliminary estimate for one variant

Downloads
258
Likes
31
Rating
5
P
PrintablesLudo B

schuifmaat klepje, battery caliper cover, soupape à étrier coulissant, válvula de pinza deslizante.

Na het proberen van de cover van 4D_printer heb ik er zelf 1tje getekend. Mijn schuifmaat heeft een andere vorm. After trying the cover of 4d_Printer I drew one myself. My caliper has a different shape.

Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant

Downloads
257
Likes
21
Rating
5
P
PrintablesOndra

Cookie cutter in the shape of a pig

Cookie cutter in the shape of a pig. Suitable for baking Christmas cookies. Vykrajovátko ve tvaru prasátka :)

Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant

Downloads
256
Likes
29
Rating
5
P
PrintablesSB

bias tape maker 0.75 inch

Simply resized for standard measurements. Prints very nicely. Currently being used to aid in relief efforts for COVID-19 masks! This is a remix of bias tape maker from https://www.thingiverse.com/thing:3880491 by Oscarko for 4cm tape…

Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant

Downloads
242
Likes
22
Rating
5
P
Printablestoddanglin

xBloom Filter Shaper

A filter shaping tool made specifically for your xBloom specialty coffee machine reusable dripper. Perfectly shape KWF-155 filters and precisely apply just enough water to make filters hold their new shape. Filters can be formed directly…

Print approx. €7.56–€9.24 excl. taxPreliminary estimate for one variant

Downloads
238
Likes
9
Rating
0
P
PrintablesLeon.Reijnders

Wago 221-412, 221-413, 221-415 Din Rail Mount (Onshape)

Wago 221-412, 221-413, 221-415 Din Rail Mount . Can also mounted by using a M5 Countersink Screw on a Flat Surface. printed in PETG Perimeter: 3 Infiltration: 15% Layerheight: 0,2mm If you like it, give me a like. you can modify the Parts…

Print approx. €1.20–€1.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
235
Likes
25
Rating
5
P
PrintablesPark Jin

Crayon-shaped Crayon Container

A simple crayon container for children to keep their crayons safe! Hello! I'm a teacher, and I designed this crayon container because my students needed a way to organize their crayons. I wanted to create something fun so they would love…

Print approx. €4.51–€5.52 excl. taxPreliminary estimate for one variant

Downloads
230
Likes
50
Rating
5
P
PrintablesPeter Farell

Apu Nahasapeemapetilon

Apu Nahasapeemapetilon from the Simpsons.

Print approx. €3.77–€4.61 excl. taxPreliminary estimate for one variant

Downloads
226
Likes
66
Rating
0
P
PrintablesMarked3D

Hexagon Scraper

I created a small scraper that uses minimal material (4.54g) and can be printed quickly (34 minutes). I am including a print file for my Mini+ using PETG and a 0.4mm nozzle. This setup uses a height range modifier to print the first…

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
224
Likes
15
Rating
4.67
P
PrintablesRetron Print

Cute cat paper emboser

A quick design for my kids. A small embossing tool with a cute cat shape. Features: Works with 5cm x 5cm paper piece. Thin paper can be pressed by hand. Thick paper requires more force. I recommended to use total body weight. Commercial…

Print approx. €1.50–€1.84 excl. taxPreliminary estimate for one variant

Downloads
213
Likes
85
Rating
5
P
PrintablesOndra

Cookie cutter in the shape of a carp

Cookie cutter in the shape of a carp / fish Vánoční vykrajovátko na perníčky ve tvaru kapr

Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant

Downloads
213
Likes
29
Rating
4

Bienenflucht Bee Escape

Dies ist eine Bienenflucht, sie wird verwendet um kurz vor der Honig-Ernte die Bienen aus dem Honigraum zu halten. Ihr müsst euch diese Datei drucken und zusätzlich noch ein Holzbrett nehmen und dieses auf euer Kisten-Maß zurecht sägen.…

Print approx. €3.24–€3.96 excl. taxPreliminary estimate for one variant

Downloads
212
Likes
15
Rating
0
P
PrintablesReindeerMoss

Klister and Ski Wax Scraper for Nordic (Cross-Country Skies)

This is a ski wax scraper and Klister removal tool, based off of the scraper included in Swix Klister boxes. I know from first hand experience how easy it is to lose them, so I made a 3D printable replacement! This is a work in progress,…

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant

Downloads
202
Likes
20
Rating
5
P
PrintablesThrorin

HP DesignJet 500 - 24inch Roll Paper (Spool Holder)

My colleague had this plotter but the fins from one of the spool holders were cracking and finally broke off. He asked me if i could print one for him and i said yes. At first i did some search for a replacement part for the Spool Holder…

Print approx. €4.26–€5.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
201
Likes
10
Rating
0
P
Printableszimbic

Geometric shapes (geometrické tvary)

Teach children the basics of geometry in a playful way with our set of 3D models. It will help children easily and joyfully identify and explore geometric shapes in the world around them. Our set is a great companion for learning that…

Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant

Downloads
197
Likes
8
Rating
0
P
Printablestrey

Simple (Vase Mode) Paper Airplane

This is the exact scale replica 3D model of the paper airplane I constructed and placed quite high with in the competition for my engineering class. Designed in Autodesk Inventor. Printed on my Ender 3 Pro with 1.75mm Inland Turquoise PLA…

Print approx. €2.03–€2.48 excl. taxPreliminary estimate for one variant

Downloads
196
Likes
30
Rating
5

Hex Printbed Scraper (20 min print)

Simple hexagon printbed scraper with no sharp edges and it is only 20 min print. You can also hang it somewhere :)

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
193
Likes
9
Rating
5
P
Printablesimototakashi

Folded paper towel holder / ペーパータオルケース

Folded paper towel case and cover with a floral pattern. You can easily take one towel, even with washed, wet hands. Then the next towel comes out, and the next towel will not get wet. So when you place this box in a bathroom, you can…

Print approx. €4.66–€5.70 excl. taxPreliminary estimate for one variant

Downloads
192
Likes
36
Rating
5
P
PrintablesRiccardo Bonomi

toilet paper holder

This is a simple and modern 3D-printed wall-mounted toilet paper holder designed for both functionality and clean aesthetics. The holder features a strong support arm and a sturdy base with mounting holes for easy wall installation using…

Print approx. €4.52–€5.52 excl. taxPreliminary estimate for one variant

Downloads
189
Likes
33
Rating
5
P
PrintablesCtihy

Karak - paper figure holder / držák postaviček

Držák papírových postaviček pro mé inserty do hry Karak. Určeno pro nové 20 mm stojánky postaviček (2. vydání a rozšíření hry už mají tyto stojánky):…

Print approx. €5.28–€6.46 excl. taxPreliminary estimate for one variant

Downloads
186
Likes
9
Rating
5
P
Printableserikatoor

knuckles ice scraper

ice scraper in knuckles no suports needed

Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant

Downloads
171
Likes
47
Rating
0
P
PrintablesBooks

Pentagonal Trapezohedron

A pentagonal trapezohedron, a popular shape for 10-sided dice. Dimensions are based on adding pentagonal pyramids to a regular dodecahedron.

Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant

Downloads
169
Likes
6
Rating
0
P
PrintablesJames Bond

Print Bed Scraper Adaptor

Fits multiple different types of print bed scrapers. The scraper should be similar in form to the ones in the pictures. Use the included G-Code, or create your own from the STL file. Happy Printing!

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
164
Likes
26
Rating
0
P
PrintablesSnorkeltorkel

Aperature cookie cutter

Aperature cookie cutter Print instructions Print in PLA with 0.4mm nossle for single perimeter edges.

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
156
Likes
36
Rating
5
P
PrintablesGrant W

LumenPNP - SMT Cut Tape Holder

This is an SMT cut tape holder specifically designed for the LumenPNP. The provided STL is for an 8mm SMT strip. There is also a *.step file that can be extruded wider to accommodate wider tape. There is an optional slit in the top of the…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
154
Likes
11
Rating
0
P
PrintablesSimonp

Pressure Advance Linien 0.6 Nozzel MK3.5 und Input Shaper Test

Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…

Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant

Downloads
151
Likes
14
Rating
0
P
Printablesquattro

Input Shaper Corner/Fillet Test

The 3mf file has the seams distributed a little bit to check their impact. My mini has severe under-extrusions in rounded corners after a long straight. Short straights are ok. Just print it and see if yours look nice. I added pauses to…

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant

Downloads
150
Likes
3
Rating
5

scraper with replaceable blades

scraper with replaceable blades with magnetic grip on metal surfaces and hexagonal design

Print approx. €0.15–€0.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
149
Likes
33
Rating
4

Kindle Paperwhite Cover (10th Gen, 2019)

I don't enjoy having an actual cover attached to my kindle while reading, but I'm also not comfortable throwing it in my backpack coverless, so I quickly designed this case. It has quite a snug fit but it does slide easily, so I added an…

Print approx. €3.70–€4.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
146
Likes
15
Rating
3
P
PrintablesNeva

HSW 5M measure tape holder

HSW 5M measure tape holder

Print approx. €1.61–€1.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
139
Likes
19
Rating
5
P
Printableskevsparky

Gridfinity Baseplate Tape Cutting Stencil

This cutting stencil allows you to cut 5mm strips of double sided tape, that can be stuck to the underside of Gridfinity Baseplates, so they can be stuck rigidly inside a drawer.

Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant

Downloads
139
Likes
69
Rating
4.67
P
PrintablesOndra

Cookie cutter in the shape of a snowman with a broom

Cookie cutter in the shape of a snowman with a broom. Winter theme. Vykrajovátko ve tvaru sněhuláka s koštětem

Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant

Downloads
138
Likes
20
Rating
5
P
PrintablesEdgar.A

Magnetic paper clip dispenser

Here's a magnetic paperclip dispenser inspired by those sold by maped. I use an 10mm magnet. If you print it at more than 0.10mm you'll need some support. That's why there are 2 g code files, 1 with supports and 1 without. Print detail :…

Print approx. €2.58–€3.15 excl. taxPreliminary estimate for one variant

Downloads
136
Likes
24
Rating
0
P
PrintablesFokieH

Robust Bed Scraper Set

Hier ein Satz Druckbett Schaber in 3 verschiedenen Größen. Ich habe diese in PETG gedruckt. Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like freuen. Here's a set of print bed scrapers in 3 different sizes.…

Print approx. €2.53–€3.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
132
Likes
7
Rating
0
P
PrintablesDilem

vape liquid/e-liquid 10ml bottle holder

Designed for my own specific need but sharing anyways. This holder holds 4 bottles of 10ml vape liquid together and is made so they fit nicely upside down aswell so you can get the last bits out of the bottle without having to balance…

Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
12
Rating
5
P
PrintablesMadeinSwabia

Minimalistic smartphone stand (for smartphones up to 10mm thickness, in landscape orientation)

Hello friends from all over the world :) This is a simple smartphone stand for cases, when you don't want to keep it in your hands while sitting at the table and would like to have a more ergonomic angle of view. For example when you're…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
12
Rating
5
P
Printablesthiebes

Heart Shaped Box w/ hinges, encapsulated magnets (print-in-place, no supports, parametric design)

Printing instructions: Magnet encapsulation in PrusaSlicer is accomplished by pausing the print before the layer that covers them : Slice the 3mf file according to your preferences. Scroll to the first layer that will cover the magnets.…

Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant

Downloads
123
Likes
22
Rating
0
P
PrintablesEli G

Stapelbarer Eierbecher

Praktischer und einfach zu druckender Eierbecher im stapelbaren Design. Sollte mit einem recht Temperaturbeständigen Material gedrunkt werden. Ich empfehle PETG oder ABS. Ich empfehle ca. 20% Infill und eine 0.2 Schichthöhe. Supports sind…

Print approx. €1.28–€1.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
121
Likes
13
Rating
5
P
PrintablesJT3D

equerre à chapeau

Une simple equerre à chapeau avec le fichier freecad fourni pour une modification éventuelle

Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant

Downloads
121
Likes
5
Rating
5
P
PrintablesNeal

M5Paper Angle Desktop Stand

M5Paper stand remixed from wall-mount version (angle back, add back support, remove holes) from https://www.thingiverse.com/thing:4767014 Code borrowed from wizche (worked perfectly first time). Suitable for tabletop / desktop / bedside…

Print approx. €4.29–€5.24 excl. taxPreliminary estimate for one variant

Downloads
117
Likes
13
Rating
5
P
PrintablesRay Fox

Paper Plate Holder

Plastic holder to provide support for paper plates. Works great to lessen chance of paper plates collapsing and/or spilling. Requires large build plate like Prusa XL Can resize to fit dessert and other plates. Fusion360 files included to…

Print approx. €6.38–€7.80 excl. taxPreliminary estimate for one variant

Downloads
117
Likes
10
Rating
5