Search results: arm

Sort order

16,069 models

P
Printablesprotomota

Elven Leaf Armor

The 3D-printed elven leaf armor is a masterpiece of ethereal elegance and intricate craftsmanship. Inspired by the natural world, the armor features an exquisite array of overlapping leaf motifs that form a flexible yet protective shell.…

Print approx. €19.82–€24.23 excl. taxPreliminary estimate for one variant

Downloads
14,595
Likes
4,344
Rating
4.94
P
PrintablesAgustin Arroyo

Low-Poly Charmander

Do you like this 3D printable design? Want more exclusive low-poly models? Join my Printables Club! 🎁 New exclusive models every month 💸 Sell 3D prints of my designs 👀 Behind the scenes content You can alternatively join my Patreon and…

Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
8,292
Likes
1,160
Rating
4.96
P
PrintablesJon Gulbani

Strongman Hulk Chicken Arms

Original by Rnagp - https://www.thingiverse.com/thing:4862154 Waited for this to show up here long enough. Here it is! Supports on bed plate only. I used a .4mm nozzle, 2 walls and 15% infill. Turned out perfect! Pics of them on chickens…

Print approx. €5.08–€6.21 excl. taxPreliminary estimate for one variant

Downloads
4,754
Likes
406
Rating
4.98
P
PrintablesAhmad

The Rock Croc Charms Small

Credit to original creator: https://www.thingiverse.com/thing:5166677

Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant

Downloads
4,177
Likes
260
Rating
4.73
P
PrintablesDaHouzKat

Multifunction Arm mounting system Spinning Adapter

360° Spinning Adapter for the Multifunction Arm Mounting System What you need Multifunction Arm mounting system (Small Arm System) Big Clamp For Small Arms This Spinning Adapter Side small-NUT-M3.stl (1x) screw-small.stl (1x) Hardware…

Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant

Downloads
3,142
Likes
1,825
Rating
4.63
P
PrintablesLU_technic

Multitool third arm

The ideal third arm for your workshop or office. Much more than just a tool. This is the multifunction and electrified tool holder. Light, extraction fan, pliers, vices, phone charger/holder, ... a large number of electrical or mechanical…

Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,994
Likes
2,239
Rating
4.88
P
PrintablesDick Dekker

Robot Arm KitCard

This model can be printed in one go and assembled using the instruction manual. It is possible to print a colour change after 3mm to give the robotarm some more depth and look more industrial. A full package for a nice present, puzzle…

Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,942
Likes
966
Rating
4.87
P
Printablesjtuckwitz

T-Rex Chicken Arms modified for easier printing.

T-Rex Chicken Arms modified for easier printing. I was striggling with the bottom of the hands sticking to supports, so I cut off a small section to make it flat, which increased my printing success rate. The cut is not noticable on the…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant

Downloads
2,602
Likes
269
Rating
4.83
P
PrintablesGFS

Seat belt - deactiv alarm. Alfa Romeo, Audi, BMW, Citroen, Cupra, Dacia, Ferrari, FIAT, Jaguar, Land Rover, Mazda, Mercedes, MG, Mini, Opel, Peugeot, Porsche, Range Rover, Renault, Seat, Skoda, Toyota, Volvo, VW.

Decorated with a logo seat belt clip. I recommend using it to deactivate the weight sensor. When carrying luggage on the seat or for decoration. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm.…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,463
Likes
121
Rating
4.83
P
Printablesmcfada

Ryobi Laser Cube Alignment and Leveling Stand for Garmin Approach R10 Golf Launch Monitor

This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…

Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,415
Likes
66
Rating
4.86
P
PrintablesPeter Farell

Armadillo

Armadillo

Print approx. €9.76–€11.93 excl. taxPreliminary estimate for one variant

Downloads
1,415
Likes
163
Rating
5

Rangement / organisateur pour peinture maquette army painter, vallejo

Organisateur de fiole de peinture à maquette, (pour fiole army painter, vallejo,...) -40 emplacements fiole peinture + 9 emplacements pour pinceaux -24 emplacements fiole peinture + 5 emplacements pour pinceaux

Print approx. €41.99–€51.32 excl. taxPreliminary estimate for one variant

Downloads
1,356
Likes
326
Rating
4.89
P
PrintablesFloatingCam

Oversized Armchair for Sylvania Family and Calico Critters

Resized to fit the Sylvania family bunnies this sofa chair prints well, looks soft, and adds a ‘lived in’ look.

Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant

Downloads
1,337
Likes
244
Rating
4.89
P
PrintablesTrickyCode

Supportless 2021 2022 Tesla Model 3 Y Rear Center Console Arm Rest Tray By Printer2261

This model is originally from Tingiverse, made by Printer2261 also known as Shane Jackson. https://www.thingiverse.com/thing:5172136 But I thought that users of printables would also like to be able to print this, since the Tesla Model Y…

Print approx. €8.62–€10.53 excl. taxPreliminary estimate for one variant

Downloads
1,156
Likes
208
Rating
4.63
P
PrintablesTorben

Tesla seat belt | buckle - alarm stop

Found this print a long while ago on thingiverse. However, the file is gone and had to search my drive again… Wanted to grant you the opportunity to use it as well. Please be aware, that I personally use this device only, when I am having…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
1,149
Likes
95
Rating
5
P
PrintablesMERoy

Hive Board Game - Swarm bugs design

Remix of the Hive Game Derivative “Swarm” pieces available on Thingiverse. I changed the thickness of the bugs (7 mm) and the depth of the bug shape (1 mm). I also modeled the bugs without the piece, if you want to create/edit a model…

Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant

Downloads
1,102
Likes
297
Rating
4.95
P
PrintablesBP3D

Low Poly Charmander (No Supports)

Remix of Weberowsky's Charmander from Pokemon

Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant

Downloads
1,097
Likes
140
Rating
4.83
P
PrintablesZS Design

Low Poly Heard with arms and legs ( Articulated )

Low Poly Heard with arms and legs

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant

Downloads
1,032
Likes
118
Rating
5
P
PrintablesMaxx

VW Polo armrest latch

DESCRIPTION 3D model of a VW Polo armrest latch. Can be printed without supports but it's cleaner with two small supports under the clips. PRINT Printed using Prusament PETG. You can print it in PLA but it's better using PETG. Infill 100%…

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
921
Likes
46
Rating
5
P
PrintablesCayden Eastrise

Upgraded 3D Print Shrek Croc Charms/Jibbitz Better Version

I made the base of the ears stronger and enlarged them. I smoothed out the back of the nose and enlarged it. NOSE Infill 20% Supports: yes 0.2 quality PETG or PLA Filament EARS Infill 20% Supports: yes 0.2 quality PETG or PLA Filament

Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant

Downloads
816
Likes
102
Rating
5
P
PrintablesVoodoo

GARMIN MOUNT for EDGE 1000

Fiz este desenho pois o suporte que tinha do meu garmin 800 não era compativel com o 1000 O que vinha o GPS ficava mais alto. Gosto de o ver em linha com o avanço Isto ainda não é a versão final English version (google translate) I made…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
814
Likes
71
Rating
4
P
PrintablesMakkuro

Crocs Emoji charms - customizable jibbitz

Use the included 360 emojis on your Crocs to customize them (jibbitz)! Press “Download STL” to find them all. If an emoji is missing or you need different sizes, you can easily create it using the makerworld customizer ! Or the included…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
791
Likes
155
Rating
5

Parametric glasses templates / glasses arms

After printing, heat the arms with a heat gun or a hair dryer and bend them to fit your head. Two Part Version The initial design (the one part one) did hold up for a month or two, but it did brake after some time at the mounting point to…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
723
Likes
62
Rating
5
P
Printablestacodetector

Scissor Arm Grabber Toy

Inspiration This design was inspired by a toy that my son had which was made very cheaply and broke much too quickly. Years later I now have a 3D printer and some CAD knowledge with which I was able to create a much more robust version…

Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant

Downloads
712
Likes
51
Rating
4.25
P
PrintablesLucianociri

Escuadras de Ensamble en X y T para Muebles de Melamina 18mm Soporte Preciso para Armado de Muebles

[EN] You can find the description in English below [ES] Escuadras de Ensamble en X y T para Melamina de 18mm Estas escuadras de ensamble en X y T son la solución perfecta para quienes trabajan con melamina de 18mm, proporcionando una…

Print approx. €8.76–€10.70 excl. taxPreliminary estimate for one variant

Downloads
625
Likes
31
Rating
0
P
PrintablesHabber

PrusaSlicer Infill Type Charms with name

After printing my previous Infill Type test, I wanted to create a version with the Names of the options. I also wanted to have each type individually. Hope you like the files. Use the 3mf to get it all setup in PrusaSlicer with the…

Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant

Downloads
591
Likes
50
Rating
5
P
Printablescedarrapidsboy

Tray Organizer - Subaru Outback (Gen 6) Armrest

This model sits on the tray inside the center armrest of a Subaru Outback (2022). Has dividers intended for a wallet, glasses, and coins (depending on model). Multiple variations are provided as STL. Original Fusion files also provided.…

Print approx. €5.59–€6.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
559
Likes
73
Rating
5
P
Printablessam allen

Driver/Passenger Armrest Switch Panel Clip

For GMT800 (1999-2007 GM/Chevy Trucks and SUV) arm rest switch panel replacement clip. This will need to be glued or epoxied in place. Trim old clip location on the arm rest and place this part into the hole underneath. The model is for…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant

Downloads
556
Likes
22
Rating
0
P
PrintablesPeter Farell

Green Days Billy Joe Armstrong

Green Day : Billy Joe Armstrong

Print approx. €3.35–€4.10 excl. taxPreliminary estimate for one variant

Downloads
536
Likes
66
Rating
5
P
PrintablesNew1

Gerber Armbar Drive pocket clip updated

Print as shown on the screenshot, without supports. I've used 0.4 line width, 0.2 layer height, PETG filament. The part should fit very tigth inside the holes, use some force. No screws or glue needed. It doesn't make one-hand operation…

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
514
Likes
44
Rating
5
P
PrintablesSASSy Design

Fish Swarm Plant pot and Planter - Vase mode design

A plant pot inspired by a huge swarm of fish swimming in the sea. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…

Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant

Downloads
500
Likes
109
Rating
4.6
P
PrintablesDaHouzKat

Multifunction Arm mounting system Cable Clip

Cable Clip for the Multifunction (Small) Arm mounting system Features Fits on the “ arm-small-hex-honeycomb-wall-compatible ” Fits 4.50mm diameter cables

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
496
Likes
207
Rating
5
P
PrintablesAku N

RC Tank T-34 PS. 231-1 Part 2 wheels and support arms

Please make part number 1 “Traks" first because it is the most challenging assembly. https://www.prusaprinters.org/prints/99893-rc-tank-t-34-ps-231-1-tracks The Support_arm_S will break if you collide. So it's a good idea to print a spare…

Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant

Downloads
460
Likes
54
Rating
5
P
PrintablesCikro

Canyon Aeroad Garmin Mount

Garmin Mount for the Canyon Aeroad (2023) Model. nedded Prints: 1x AeroadGarminMount 1x garmin-interface-spring 1x garmin-interface-lockring 1x assembly-tool (only for assembly) other needed Material: 2x M4x14 Screws (or similar length,…

Print approx. €2.12–€2.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
455
Likes
30
Rating
0
P
PrintablesTyson Nielsen

Couch Armrest Drink Holder / Phone Stand / Remote Holder: For Cloud Couch / Lovesac / Large Sectional

TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…

Print approx. €16.29–€19.91 excl. taxPreliminary estimate for one variant

Downloads
454
Likes
124
Rating
5
P
PrintablesEricFrenk

Firearm Safety Sign

A sign I created with the 4 cardinal rules of firearm safety. Can pause the print midway for color change or print using the gcode provided. Fits the Prusa Mk3 print bed.

Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
424
Likes
83
Rating
5
P
PrintablesCadoEnterprise

Robot Shangai hydraulic arm

Solve the initial puzzle, assemble the robot following the instructions in the .PDF file, understand the basics of mechanics and its problems, once assembled, solve the kinematics problems that engineers have to face to make a manipulator…

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
409
Likes
124
Rating
5
P
PrintablesToby3D

Wedding Gnomes Duo – Charming Garden Decor for Your Special Day

Disclaimer: These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…

Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant

Downloads
376
Likes
50
Rating
0
P
PrintablesPeter Farell

Little Green Army Men : Military Tent

Little Green Army Men : Military Tent

Print approx. €13.56–€16.58 excl. taxPreliminary estimate for one variant

Downloads
337
Likes
35
Rating
0
P
PrintablesAnheledir

ESP32-Camera arm-mount for MK3/MK4 and other 3030 aluminium extrusions w/ t-nuts

This is a pre-arranged and pre-supported collection of all necessary parts to print a case for the ESP32-Camera with a side-arm mount on the 3030 Extrusion of the MK3 and MK4, and t-nuts that don't need disassembling of the printer to…

Print approx. €5.39–€6.58 excl. taxPreliminary estimate for one variant

Downloads
330
Likes
47
Rating
4
P
PrintablesRobertusMaximus

Armoured Shelter - Terrain - Two models

Armoured Shelter This is a model I cut out the parts for around 10 years ago but never assembled. Then I got thinking, hey, why not build it in TinkerCad? Yeah! So that's what I did. Attached are two models. The main difference is one has…

Print approx. €10.65–€13.01 excl. taxPreliminary estimate for one variant

Downloads
308
Likes
64
Rating
5
P
Printablesreox

Lucky Charm - Four-Leaf Clover

Last minute print for the year ;) Set to 3mm height scaled to 70% in slicer (effective height 2.1mm) 100% infill Octagram Spiral has a nice effect on the top surface! I printed it in PETG, because I had no PLA in green color…

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
296
Likes
31
Rating
5
P
PrintablesExomaker

WWII US Army First Aid Kit Box – Multicolor 3D Print (No MMU)

I decided to design this WWII First Aid Kit , originally used during World War II and manufactured for U.S. Army Jeeps . The model has been created after extensive research, using all the historical information I was able to find. It is a…

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
292
Likes
60
Rating
5
P
PrintablesSorp2005

Raspberry Pi 3B+ CAM Rover with arm

This is a remix of the Rover . I made the model so it can fit a raspberry pi 3b+, a raspicam model 3, a servo HAT and a dc Motordriver. This Model Provides all files needed. There are two python files, which need to be loaded to the…

Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant

Downloads
277
Likes
67
Rating
0
P
PrintablesEl Chinn

LEGO Technic Liftarm 1x7 (6278125)

my son lost this part while building some cool original lego technic monstertruck (thanks to the LEGO company), and i was irritated not to find it somewhere here. luckily 2 were used in the model, so i started to reengineer it . the angel…

Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant

Downloads
269
Likes
25
Rating
4
P

Woven Bangle Armreif

Had a beige filament and wanted to print something matching with it. Created procedurally in Geonodes with Blender 3.2. Woven Bangle Model. I designed it for small arm diameters. You might have to scale it up for your arm. The model is…

Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant

Downloads
266
Likes
35
Rating
5
P
PrintablesBdaboy

Prusa Mini Filament Sensor Arm for BondTech extruder

Allow Top loading of filament when using the BondTech Extruder. To make this work you will need a M3 x 50mm screw and hex nut. That was the hardest part as finding anything that long took some time. This is the arm only so you will need…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
257
Likes
59
Rating
5
P
PrintablesPeter Farell

Little Green Army Men : Military ATV : Polaris MRZR Alpha

Little Green Army Men : Military ATV : Polaris MRZR Alpha

Print approx. €10.23–€12.50 excl. taxPreliminary estimate for one variant

Downloads
250
Likes
26
Rating
0
P
PrintablesHampusbjork

QYSEA FIFISH V6 Claw for Robotic Arm

More or less 1:1 model of claws for Fifish robotic arm. .OBJ file is here as well so we can modify them to get even more useful tools to use. After printing I recommend drilling the 4mm holes with a 4mm drill just to keep it a tight fit.…

Print approx. €4.43–€5.42 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
215
Likes
35
Rating
5
P

Clamp with Connection (Multifunctional Arm)

Use 3 perimeters to increase stiffness. The bolt may break when tightened. You can print flat, but need to adjust tolerances. Different lengths. Can be combined with different screws.

Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant

Downloads
214
Likes
40
Rating
0
P
Printablessacrilegor

MUGLASS - Earmuff + Safety glasses wall holder

I never knew where my hearing protection, or safety glasses are, so I made a combined holder for booth of them. It can accommodate bigger earmuffs and glasses. I tried to minimalize the required wall space, and make the design easy to…

Print approx. €4.71–€5.75 excl. taxPreliminary estimate for one variant

Downloads
207
Likes
28
Rating
4.67
P
Printables3DBob

Creepy Hands - with Stand, Stick Arms, and Storage

These creepy hands are nice decoration when on the base. When attached to the handles, they can be used at Halloween, in cosplay, and also make good back scratchers! If you like these cool, err I mean creepy hands, check out this dice…

Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant

Downloads
206
Likes
28
Rating
0
P
PrintablesPolyForge

Chicken – Farm Animal Sculpture

This chicken figurine brings a fun and detailed representation of a common farm animal. Ideal for dioramas, country-style decoration, or as a playful gift for animal lovers. Printing : Works well with both FDM and resin printers Supports…

Print approx. €27.25–€33.30 excl. taxPreliminary estimate for one variant

Downloads
197
Likes
22
Rating
5
P
Printableskavics

K989 monoshock front arm

I printed in PETG, 0,2 mm, 4 perimeters.

Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
173
Likes
23
Rating
0
P
Printablespatrickzell

Bosch Kiox 300 Adapter for Garmin Navigation

Bosch Kiox 300 Halteradapter auf Garmin Edge u.a. Mit dem Adapter ist es möglich, sein Garmin Navi (z.B. Edge 830 u.v.a.) direkt anstelle des E-Bike DIsplays Kiox 300 von Bosch zu montieren. Das Garming Gerät rastet zwar nicht ein, klemmt…

Print approx. €0.52–€0.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
171
Likes
4
Rating
0
P
Printablescmos

Adidas Sunglases Arm/Temple Hinge (Adidas A164)

The glasses are well over 10 years old and I hat one of the hinges replaced before. When I contacted an optician to get another hinge-spare he made some phonically and told be, that the original spare would not be available any more. So I…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
166
Likes
7
Rating
0
P
Printablesplabs.cz

Armrest Latch – Mitshubishi Pajero Sport

Armrest latch for Mitsubishi Pajero sport (K90). Recommendation: Material: PETG Layer height 0.15 mm Infill: min. 50 % gyroid

Print approx. €0.14–€0.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
155
Likes
10
Rating
5
P
PrintablesPeter Farell

Little Green Army : Princess Bride : The Man In Black

Little Green Army : Princess Bride : The Man In Black I need to do a Regular Westley as well. So This will be the main Teaser for the Little Green Army Princess Bride Collection exclusive to Myclub. There will be multiple grouping. Here…

Print approx. €1.94–€2.37 excl. taxPreliminary estimate for one variant

Downloads
153
Likes
44
Rating
0
P
Printables3DHippo

Pig Lucky Charm Coin Fidget for New Years Eve

This is not only a lucky charm, but also a fidget toy. I have loaded the .step file in addition to the .stl file, so that everyone can write their own private message. I also intentionally left out the year, so it can be used for multiple…

Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant

Downloads
152
Likes
21
Rating
5
P

Forearm crutch wall mount

Wall mount for one forearm crutch. PETG and a little more perimeters and infill are recommended.

Print approx. €4.66–€5.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
149
Likes
35
Rating
5
P
PrintablesThe_5thDoctor

Armory Forged Shell For Small Ghost

This is a remix of the Armory Forged Shell Ghost addons by Toukejin . The parts have been resized to fit the smaller ghost model by BoldPrintShop. Gcode provided is for the Ender 3 line of printers.

Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant

Downloads
146
Likes
62
Rating
0

Silo. Farm Toy

A model for dioramas and model displays

Print approx. €12.47–€15.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
145
Likes
17
Rating
0
P
PrintablesPeter Farell

Armored Dragon

Armored Dragon

Print approx. €15.71–€19.20 excl. taxPreliminary estimate for one variant

Downloads
144
Likes
54
Rating
0
P
Printablessacrilegor

MUGLASS - Earmuff + Safety glasses wall holder - Ikea Skadis and Küpper wall

I never knew where my hearing protection, or safety glasses are, so I made a combined holder for booth of them. It can accommodate bigger earmuffs and glasses. I tried to minimalize the required wall space, and make the design easy to…

Print approx. €4.84–€5.91 excl. taxPreliminary estimate for one variant

Downloads
143
Likes
17
Rating
4.75
P
PrintablesJohnM

Garmin XT / XT2 BMW GS bar mount

A two-part mount to fit a Garmin XT or XT2 to the handlebars. Requires M4 set screws and nuts (I recommend Nyloc nuts) to complete, which are readily available.

Print approx. €3.53–€4.31 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
139
Likes
11
Rating
0
P
PrintablesRazelak

Skullcandy Crusher Evo headphone replacement arms

This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
138
Likes
15
Rating
0
P
PrintablesPolyForge

Marmot – Cute Forest Animal Figurine

This marmot figurine features the round body, short limbs, and curious face typical of this alpine creature. It’s great for natural dioramas, educational use, or just as a cute collectible! Printing : Works with FDM and resin printers…

Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
17
Rating
0
P
PrintablesJeff

US Army's 1st Infantry Division Patch

The g-code was sliced for 3 color changes (Black, Olive Green , then Red). It was scaled to 150% in X & Y only. Prusaslicer’s default .2mm quality setting with 15% infill. STL file included.

Print approx. €1.24–€1.51 excl. taxPreliminary estimate for one variant

Downloads
133
Likes
21
Rating
5

Subtractive Pit Bull Love Dog Tag, Charm, Medallion

Big Pit Love is not a remix of Pit Love. They are opposites! In Pit Love, the Pit Bull comes out of charm and is altogether not as sturdy. This is perfect! Original file is an svg used for CNC router, it makes sense it works out in…

Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant

Downloads
132
Likes
8
Rating
0
P
PrintablesP-atix

Pokémon Starmie 608 bearing spinner

Starmie the spinner with stand. Using 608 ball bearing, if you dont have one try print 608D.STL Printer setup: Nozzle diameter 0,4 Layer height 0.20 10% infill No supports

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
128
Likes
44
Rating
5
P
PrintablesCalebTimoteo

Charmander Low Poly - Pokemon Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed No Brim needed Scale it as you like :)

Print approx. €5.42–€6.62 excl. taxPreliminary estimate for one variant

Downloads
125
Likes
28
Rating
0

Robotic Arm Phone Holder

UPDATE: Some parts may not be inserted properly, if you are having trouble inserting the joints together, I suggest either removing the screw mechanism an instead just make it a flat smooth surface, or make the insert or hole just a few…

Print approx. €0.56–€0.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
124
Likes
28
Rating
0
P
PrintablesKosmopark

Orbital tank farm Starbase v1

Basic model of SpaceX Boca Chica / Starbase orbital tankfarm for launches SuperHeavy Starship rockets. It is based on flyover video by RGV Aerial from January 2022 (video please find below - around time 9:50). In this first version, all…

Print approx. €2.33–€2.85 excl. taxPreliminary estimate for one variant

Downloads
121
Likes
11
Rating
5
P
PrintablesTommy_W

Garmin Force Trolling Motor Skeg

This is not meant as a permanent replacement for the original part, I´m sure Garmin has made the original part to certain standards. But it´s nice to have as a temporary fix until a new one arrives from Garmin. I always have a few laying…

Print approx. €3.26–€3.98 excl. taxPreliminary estimate for one variant

Downloads
119
Likes
13
Rating
5
P
Printablesdrew.brashler

Garmin Varia Seat Mount for Saddle Bag

My saddle bag got in the way of a good place to mount my Garmin Varia RTL515 rear facing radar. This mount attaches to the seat mounts. My seat had 7mm bars and they were wide from edge to edge. This uses a single M4 nut and M4x20 bolt to…

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant

Downloads
119
Likes
15
Rating
5
P
PrintablesJeff

US Army's 4th Infantry Division Patch

The g-code was sliced for 4 color changes (Black, Yellow, Black, then Green). Prusaslicer’s default .2mm quality setting with 15% infill. STL & 3mf file included.

Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant

Downloads
118
Likes
15
Rating
0
P
PrintablesJeff

US Army's 101st Infantry Division Patch

The g-code was sliced for 5 color changes (White, Black, Red, Yellow, then White again). Prusaslicer’s default .2mm quality setting with 15% infill. STL file included and 3mf included.

Print approx. €1.86–€2.28 excl. taxPreliminary estimate for one variant

Downloads
114
Likes
23
Rating
0
P
Printablesluca

porta acrilici per colori di the army painter

cercavo un porta tubetti per i miei acrilici di the army painter, il modello originale non mi lasciava vedere le etichette dei colori

Print approx. €11.01–€13.46 excl. taxPreliminary estimate for one variant

Downloads
104
Likes
10
Rating
5
P
PrintablesJeff

US Army's 3rd Infantry Division Patch

The g-code was sliced for 3 color changes (Green, White, then Blue). Prusaslicer’s default .2mm quality setting with 15% infill. STL file included and 3mf included.

Print approx. €3.67–€4.49 excl. taxPreliminary estimate for one variant

Downloads
98
Likes
11
Rating
5
P
PrintablesJeff

US Army's 25th Infantry Division Patch

The g-code was sliced for 2 color changes (Red, then Yellow). Model was also scaled down to 75%. Prusaslicer’s default .2mm quality setting with 15% infill. STL file included and 3mf included.

Print approx. €2.28–€2.78 excl. taxPreliminary estimate for one variant

Downloads
98
Likes
10
Rating
0
P
PrintablesZdeněk

Pencil Polearms Display Stand

This stand was created to display the Pencil Polearms by soozafone . I liked the model so much that I wanted to give it proper treatment and photograph it nicely. By chance I also had a box of new pencils at hand, so I put together this…

Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant

Downloads
95
Likes
47
Rating
0
P
PrintablesMrViddy

Just Married charm for Crocs

I Printed it 100% infill for better strength easy to push in and out (No issues) needs supports printed it in PETG for a little flexibility and UV

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant

Downloads
95
Likes
32
Rating
0
P
Printables3D Ideation

US Army Logo Keychain

US Army Logo Keychain

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
87
Likes
13
Rating
0
P
PrintablesDe3DPrintman

Schrute Farms Logo Plate (The Office - US)

I am a massive fan of The Office and love the big cuddly loony tune Dwight Schrute and his 40-acre beet farm. LOL. I have already watched the series three times and don't know why because some things aren't that funny anymore. However,…

Print approx. €4.70–€5.74 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
56
Rating
0
P
PrintablesJeff

US Army's 82nd Infantry Division Patch

The g-code was sliced for 3 color changes (Blue, Red, then White). Prusaslicer’s default .2mm quality setting with 15% infill. STL file included and 3mf included.

Print approx. €2.73–€3.33 excl. taxPreliminary estimate for one variant

Downloads
76
Likes
11
Rating
5
P
PrintablesDot Dot Dash

Naginata like polearm

Making a costume for my son he is going as a Samurai or Ashigaru and wanted a pole weapon prop. I could not find any models online, so I took the challenge of designing a blade for a 23mm broken broom handle we had laying round. this is…

Print approx. €3.72–€4.54 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
10
Rating
0
P
PrintablesBlackfellow

osvac F32-H32 remix to Starmix SG8 vaccum cleaner

I remixed the osvac F32-H32 thing to adapt to my Starmix SG8 vaccum cleaner. Settings are for PETG from manufacturer Material for Print. The attached gcode is for a 0.6mm nozzle. The model will be printable with a 0.4mm nozzle too but…

Print approx. €4.13–€5.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
3
Rating
0
P
PrintablesTurbopstros

Victorinox Swiss Army Knife Hooks for IKEA SKADIS

Do your Victorinox Swiss Army knives currently live in a messy drawer, forgotten and unloved? Do they deserve a VIP spot where they can shine in all their multi-tool glory? Say hello to the Victorinox Swiss Army Knife Hooks for IKEA…

Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
69
Likes
20
Rating
5
P
PrintablesCelare

Rumi Belt Design or Hanging Jewelry Charm

Another necessary costume element for Rumi's Golden Outfit- its the thing that hangs on her belt, whatever it should be called. I saw people use beads and jewelry tools, but this was quick and lightweight. Sized for an adult costume, and…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant

Downloads
69
Likes
7
Rating
0
P
PrintablesPeter Farell

Little Green Army : Princess Bride : Rock Terrain

Little Green Army : Princess Bride : Rock Terrain Figures not Included. Figures can be found here. and Here

Print approx. €12.29–€15.03 excl. taxPreliminary estimate for one variant

Downloads
69
Likes
20
Rating
0
P
PrintablesSaphir

R1 Filament Guide longer arms and lower mount Remix

I created an adapter that allows you to mount normal M8 threads on the Original Prusa spool holder ( https://www.printables.com/de/model/511105-m8-adapter-for-original-prusa-mk3-spoolholder ) . So I was able to attach the Universal…

Print approx. €1.88–€2.30 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
69
Likes
14
Rating
5
P
PrintablesBoBaCool

Glass magnifier replacement frame 100mm - Cadre/armature de remplacement pour loupe 100mm

Glass magnifier replacement frame 100mm. Just printed both parts, base and ring with PLA. Insert the glass lens into the base. Lock it by firmly pressing the ring against the glass lens. Warning : take care to insert the ring with the…

Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant

Downloads
69
Likes
7
Rating
0
P
Printablesmscalora

Blink Mini Camera Mount Arm

I wanted to mount my camera to the wooden table where I have my MK3S+ printer. This arm is about 3" offset (diagonally) and 4" up from the table surface. I printed with some supports so the arm wouldn't vibrate, fall or droop down.

Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant

Downloads
67
Likes
12
Rating
5
P
PrintablesAdamStanislav

Slovakia Coat of Arms / Erb Slovenska

Cookie Cutter of the Coat of Arms of Slovakia. Designed in Affinity Designer, converted to 3D and mirrored for proper cutting (though, I guess, this is symmetrical, so I did not really need to do it, but I did anyway) in FreeCAD.…

Print approx. €4.13–€5.05 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
65
Likes
8
Rating
0
P

Easy to print shoe charm catapult

Hi all, Thanks for downloading this shoe charm catapult. The model is simple printing-wise, just one part so no assembly is required. The printer settings are still a work in progress I'll update them in the future. The settings below…

Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
13
Rating
5
P
PrintablesNils

Charging Stand for Garmin Venu Sq 2

Additional parts: 3x Screw M3x(6-10) ISO 14580 Garmin to USB-C “Type C side bend” https://de.aliexpress.com/item/1005004121461795.html Print needs supports.

Print approx. €2.82–€3.45 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
9
Rating
5
P
Printablesjonashedlof

Schneider / telemecanique Harmony XB5 22mm wrench tool

V6 2024-03-25 New design with a outer ring for better performance V5 2024-03-xx First release

Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant

Downloads
61
Likes
5
Rating
0
P
Printablesmonkeydom

Remix: StrongArm - Crocodile Edition

Meant for the same print settings that https://www.printables.com/@AdamL - suggested: 2 100% infill modifiers over the two corners (see picture). 40% gyroid infill , 5 perimeters Included the MK4 Input slicer PETG print file that produced…

Print approx. €2.64–€3.23 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
56
Likes
13
Rating
5
P
PrintablesAuka

Tetris inspired mini-robot (Piece thrower arm)

The design is a mini robot inspired by the original Tetris . It consists of a body, where the head is attached with a pin and the arms and legs are placed with ball joints. All the pieces are inspired by Tetris, the extremities beign the…

Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant

Downloads
54
Likes
16
Rating
0
P
Printablessteve

Stickvise magic arm scope probe holder

3D printable modifications to attach an oscilloscope probe to a low cost magic arm mounted to a Stickvise: StickviseArmBase: Base that goes between the Stickvise and its jaws, onto which a magic arm can be mounted via M5 threads…

Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
54
Likes
9
Rating
0