1,504 models
You can now purchase screw/mirror kits at Kissner Optik . Official Discord server here. New instruction manual is here! See “other files.” I recommend the Hill Mount, Marci Mount or EMT remix over the one featured here. Wooden ones still…
Following a discussion I had with @ThatMakerKid, I wanted to create my own set of 3d printed spudger tools inspired by the iFixit spudger designs but with a geometry better suited for FDM printing. I decided to create 3 models to achieve…
I've been working on this engine for quite some time. it is a bit hard to print since the tolerances need to be quite tight. it can be a little hard to break free so have some pasient and a well-tuned machine will help. it can be printed…
Since commercally available bicycle repair stands are quite expensive, I decided to design one on my own. This assembly stand is supposed to hold your bike in a comfortable position, while you can work on it. I used 53mm pipes and did a…
NOTE: I just tested this with my marker chrono'd for the first time and it does not work at full power. The sear spring is just not strong enough to get that sear back up in time. I'll work on that and get an improved sear spring uploaded…
This is the outer ring for my Clock Face Rolex Submariner style . Assembled with the parts mentioned below and a Quartz Clock Movement Mechanism, you will have a wall-clock inspired by the Rolex Submariner as shown on the cover picture.…
This is an 'extrusion and assembly tolerance test' designed to check the minimum visible extrusion capability and the minimum distance required to assembly pieces working with a 0.40mm standard nozzle. The units of the numbers below the…
Summary This is my attempt to design, print and make the largest bladeless fan a MK3 can print. It can be powered by a 120mm DC, or AC fan. Using a AC fan will yield much higher wind volume, you can also easily find 120mm AC fan with…
flat in-view rotating XY table for microscope SMD assembly and inspection Just 26 mm high but featuring 2 axis plus rotation. Use either stick for rotation around center axis. Twist the sticks to move the XY table with gear-reduced…
A simple two-piece box that stores a full Mk4 Nextruder hot-end assembly (Heater, Thermistor, Heaterblock, Mk4 Nozzle or v6 adapter+v6 nozzle) as well as one to three v6 nozzles. It has a few small features on both short ends to allow it…
This robust tool allows you to glue panels of varying thickness, up to 25 mm, squarely. Printed in PETG, requires few supports. The screw must be imprinted vertically, placed on the head. It has a reserve for sticking a 3 mm diameter…
I wanted a model that could replace my 628z bearings. I scaled the original file to fit the 628z in PrusaSlicer 2.9.2. 628Z Bearing: Dimensions: 8mm inner diameter, 24mm outer diameter, 8mm width. Common Uses: May be used in applications…
I didn't like how the buffer held on (barely) to the printer, doesn't work with the loading fork, or was in the way when printing without the MMU. After trying other solutions without satisfaction, here's my attempt to fix all 3! More…
Recommended print settings: Material: PLA/PETG Layer Height: 0.15 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional This model is a simplistic flashlight that can be added to a keychain. A CR2032…
Uses a 120 mm 24V fan and a 70 mm diameter x 60 mm deep circular odour filter
This is tripod 1 of 2, I had to rebuild almost the whole head from scrach, not much left to save or measure, as seen in photos. It can pitch, yaw and tilt like the original. Printed in PETG 0.1mm.
Les fichiers Freecad sont fournis pour pouvoir modifier les dimensions des tubes.
Printed both parts with PETG. Part 046, the interlayer, is originally made from rubber, presumably to dampen vibrations to the steering wheel. Maybe I will print it with TPU later. I found some crumbly residues where part 051 (the bearing…
Little sign you can put on your computer/ desk area so your boss can tell when you're officially working / clocking out! (Also included is specialized version for people named Juan)
Modeled from scratch, inspired by lwx007's design: Thingiverse #5685812 I saw some comments about difficulties with the original model requiring assembly or gluing, and decided to make a model that can be printed in a single piece and…
Build Tray is a modular organization system designed for makers, tinkerers, technicians, repair enthusiasts and anyone who needs to keep small parts under control while working on a project. It was created to help organize components…
Obvious Disclaimer: This will NOT 3D print. Assembly instructions for Dummy 13. Folds into 1/8th A4 booklet if you want to 2D print it. The assembled dummy 13 file is included but fair warning it is cumbersome as I had to convert from the…
This 3D printed TIE Fighter fan art model is built from multiple parts that fit together cleanly without the need for supports . Some parts may optionally be glued for extra stability. The finished model is a detailed reconstruction of…
Full CAD assembly of the entire CORE One printer, STEP files and Fusion assembly included. Use it as a template for your mods, plan your setup, or make spare parts. Released under the Open Community License (OCL) . We designed the Open…
UPDATE: If you are printing with Silk PLA or have issues with the pin breaking during assembly please use the "flat pin" file for a stronger print orientation. UPDATE: License changed to allow commercial use, please credit my design if…
These two models can be combined to make as large or as small as a display area as you need. Both being based on the same hexagon base, they fit together perfectly. Print as many as you like and display all of your awesome prints and/or…
***NEW NOTE: Hey everyone, please stop reporting to me that someone is selling prints of this design. See the licensing at the bottom – commercial use is freely allowed. The original was by Happy Moon, who licensed it like that (and I do…
Bambu Lab P1P Cable Chain Assembly (1/9/2023) Designed a few parts needed to attach a cable chain, similar to the one seen on the X1. The chain helps keep the USB cable and PTFE tube completely inside the P1P, which is needed if you're…
Full CAD assembly of the entire CORE One L printer, STEP files and Fusion assembly included. Use it as a template for your mods, plan your setup, or make spare parts. Released under the Open Community License (OCL) . We designed the Open…
Print in place pencil box with 2 laches. No assembly needed! Good for school or any other need.. Space on the inside in: Length: 190mm Width: 40mm Height: 19.8mm No supports needed but there is some bridging. In the pic the hinges are…
The clamp uses a spring-based mechanism to apply a constant and even clamping force , making it ideal for delicate assemblies where consistent pressure is more important than high force. Thanks to its simple geometry, the design can…
Introduction This is a no-glue-required build. The parts are threaded to make for easy assembly. Perfect as a gift or to make a fine addition to your collection. Parts list 1x Pommel 1x Hexacore Diatium Power Cells 3x Palladium Vortex…
Updated version of the MKI which fixes some issue with slicing, tolerances for easy print etc. Introducing “The Elastic Eagle MK II” - This is a rubber band pistol that doesn't need any assembly. I found many 3d printable rubber band…
Printed bearing with no balls or assembly, easy to print with no supports. I saw another one like this on Thingiverse but the curve was the other way around which made me feel like it would be less stable. Print Settings Rafts: No…
All components should be sized correctly as-is. I've individualized everything. I can compile them in a grid as one file upon request. Solid and easy to print helping hand setup for your desk or on the go. Components needed: 1x Body &…
This will hopefully, one day be a complete model of the Creality Ender 3 S1 printer. It is currently still a work in progress. I modeled everything off of my own Ender 3 S1, so I cannot guarantee that yours will be identical. Please note…
These are detailed models of IKEA SKÅDIS / UPPSPEL pegboards in all standard sizes . They include the pegboard, the mounting bracket, screws, and standoffs. You can use these models in CAD assemblies to create renders, to showcase your…
Creality K1 Assembly CAD model (non-official - reversed engineered) This model is a work in progress. It's still containing some inaccuracies and is missing some features. I don't recommend to print any part of this model as is. They are…
Assembly is a bit difficult because it has to be screwed together in a specific order, but I made a video about it. I hope it's helpful. Most of the models in the All.3mf file are equipped with support and seam and oriented to fit even a…
Use a toothpick to attach the top crystal Make sure to add proper supports for the bow tie or use the included 3mf file Differences from the remixed model: Better looking top sim crystal, actually symmetric Fixed geometry in some places…
The source marked this model as adult content.
Work in progress. Be warned, this model may contain some dimensional inaccuracy. This model is meant to be used as an asset in CAD software. I don't recommend to print this model as it is. It's not optimized for FDM printing. Creality K1…
https://paypal.me/radicalreel VERSION 4 OUT NOW EXCLUSIVELY ON MAKERWORLD! Link: https://makerworld.com/en/models/1267206-ratchet-strap-reel-v4-clicky-assembly#profileId-1293172 24/10/12: Cleaned up: Archived old data and updatd…
🧰 Screw Organizer Box for Repairs & Disassembly 📦 Description This 3D-printed screw organizer is designed to help you keep screws, bolts, washers, and small components neatly sorted while working on electronics, machines, or furniture.…
https://www.youtube.com/shorts/cN22IXL_Mlg Print Versions at the bottom of downloads page Edit#2 09-09-2022. adding 100% scale stl files scale down to fit your print bed (80% is all that fits on my MK3s+. Sorry for the problems and a huge…
BOM: Printed with ROSA3D Starter PLA Red Make your DIY furniture building and cabinet assembly much easier with this precise 90-degree L-corner jig. Designed specifically for standard 18mm thick boards—the most common size used in…
Recently, for some unknown reason, a lot of people have been questioning and obsessing over the idea of using stupid high CPR encoders. If you're one of those, consider this: If you do the math for 4096 CPR that is 1024ppr, that means one…
Work in progress. Be warned, this model may contain some inaccuracy on the gears position. This model is meant to be used as an asset in CAD software, not to be 3d printed. Creality K1 Assembly CAD Model Change Log 08 October 2023 Release…
For a lot of helpful details/info please consult the main Teaching Tech listing here: https://www.printables.com/model/864950-open-source-spacemouse-space-mushroom-remix This final assembly video explains all about my remixes in this set:…
The remix is an assembly of all the furry parts found on the internet. I have created it to be a single-click print that the furry artists may send to their friends with printers. I am not an author of the models, just this handy assembly…
If you're into target shooting, this is the print for you. This is an adjustable height bench rest for rifle shooting with interchangeable yokes to fit the stock width of your rifle. The height adjustment is done easily by turning the…
BOM: Printed with ROSA3D Starter PLA Red Expand your 3D-printed woodworking toolkit! Following our popular L-corner jig, this precise T-joint assembly jig is designed to help you flawlessly connect intersecting standard 18mm boards at a…
This is an excellent model of the human muscle and bone structure, freely shared by Raf Grassetti (https://grassettiart.gumroad.com/l/KbAQA). It is around 25cm tall. If you want to print a smaller version, i recommend taking a look at the…
A great and space saver solution for storing your complete hotends by Bambu Lab. No support needed.
I have many more versions and styles of these boxes over at MakerWorld. Please check them out! There’s an updated version of this box as well as some with customizable dividers and even an empty box that you can put whatever you want in…
I loved the design of @MarkRichardso_449235 's model of the Mid century Welby mantle clock, but having to trim and glue the lines and dots on the face into place was tedious. So I remixed it for printing on both printers with multi…
You can get a wire to attach the tail to the waist and might need a little drill to make a hole as the same size as the wire you use. You can do the same for the wire that is attached to the spike (I don't know the name of the thing ) to…
Use this jig to center and round out the center of the iris compass circle drawing tool. This made assembly go from irritating to slightly less irritating, but still tedious. The reason it's so tall is so that the leaves do not…
⚙ Ball Bearing This 3D printable ball bearing is designed as a functional mechanical component suitable for prototypes, hobby projects, and educational demonstrations. The model features a classic ball bearing structure with an inner…
This model is meant to be used as an asset in CAD software, not to be 3d printed. Creality K1 Assembly CAD Model Change Log 08 October 2023 Release Version 2 - Dimensional fine tuning and filament path position adjustments. 24 September…
Product Description: Introducing the Pull Copter, a 3D printable toy for kids and kids at heart. It comprises just three parts: the pulling rod, the propeller (or spinning top), and the base. There's no need for assembly—print, play, and…
Swimbait Fishing Lure mimicking the appearance of a minnow (lambari). This lure boasts an exceptional level of detail, featuring intricately modeled scales, lifelike fins, and a stunningly accurate gill area. What sets this lure apart is…
I found the original hinge design was really hard to put together and broke more often than not. I remixed the original design to have a print-in-place hinge system which is essentially a hidden, floating pin inside the hinge and allows…
I love the Lego Wreath and I am in the process of printing more for Christmas. I needed a jig to align my 6 segment wreaths at a perfect 45 degrees. I traced the original Lego wreath branches to make this jig.
Lets you slide the block off the rail and put it back easily. Tested them with Magicphoenix MGN9H and genuine Hiwin MGN12H blocks and they fit perfectly. Print as-is (on the side) with default settings and make sure you don't have an…
Ever need a good bevel gear? Well now you don't. Instructions 3D print. Mesh. OMG, I hope Honda doesn't use bevel gears!! #dontbeahonda
This is an assembly of the Original Prusa Enclosure. Prusa has released STEP files for all the parts on GitHub (Link) , but those are single parts only, not a full assembly. That's why I took the time to assemble everything in Fusion360.…
Uploader comment: This is not my model, and is a reupload. I found this fantastic print-in-place Chinese folding fan and its stand hiding deep in the Thingiverse. While it is made for the year of the goat, I think it still holds up well,…
A 3D Printed Grommet that works.
Print Settings Rim Materials: PLA - quick and easy, but could break from UV radiation PETG - should be a bit tougher and less prone to failure Print Settings: Walls: 3 Infill: does not matter (should be solid at all parts anyways)…
The source marked this model as adult content.
4 Cylinder Engine Assembly & Drafting This model is designed as a practice project to enhance your 3D CAD skills. It's a detailed 4-cylinder engine assembly that tests your abilities in both modeling and drafting. The tolerances are not…
This is the first release of a model that I intend to refine further. Help test this out, provide your feedback. This assembly reduces auxiliary fan noise and improves chamber heat retention. While also preventing the buildup of hot spots…
Edit: Added v4 lid which now has nubs for easier turning, as a few have suggested. I didn't see any remixes yet so I added this one myself :) I noticed that the original model had a tendency to come undone and you can't really see what's…
This dodecahedron can be used to stick reflective markers for 3D scanners to it. It's fully parametric when you use Autodesk Fusion. This was built with a free version of Autodesk Fusion hence the license that doesn't allow commercial use…
Full CAD assembly of the entire CORE One printer, including STEP files and a Fusion assembly. Use it as a template for your mods, to plan your setup, or to create spare parts. Released under the Open Community License (OCL) . CAD assembly…
This is a model of the MicroSwiss DirectDrive and AllMetalHotend for the Creality Ender 5 printer and was created by manually measuring some parts from my CR10/Ender 3 MicroSwiss DirectDrive, except for the backplate that I uploaded here…
A remix that adds a stop to one end of the rail. So the carriage can only be removed from one end, and will not fall off the other. Print on their side, as per the original. I found the MGN9 rail was slightly too loose, and the MGN12 was…
I have made the front wing from the FIA 2026 Formula 1 car so that you can easily print it in one piece.
desk clock · assembly modern minimalist desk clock assembly for the bambu clock components kit the dials for the hour, minutes and the cap have very small tolerances to have a very tight fight, having been optimised for bambu matte pla,…
This is the complete assembly to the best of my abilities of the original KE. I do not have a KE to verify the assembly 1:1 but it should match the model as the parts have been confirmed to work. Original Links: Open source Ender 3 V3 SE…
Go support La Calavera on Patreon La Calavera 3DPrint | creando 3D models to print | Patreon
I have compiled a collection of models that can be used to assemble a 3D printed version of Noctua's NV-AA1-12 Airflow Amplifier so it can be used as a desk fan. You will need the following hardware: 2x M4-12mm screws 2x M4 heat-set…
Welcome to the assembly Steps and thanks for your interest! I’m happy to announce that the assembly instructions are finally here. The assembly guide ''videos'' are ready, and you can now assemble your Wire Stripper Pro (…
ENDER 3 V3 SE Extruder Assembly using this (https://www.printables.com/model/308416) and parts i made
This is a printable car disassembly tool set of 5 tools.
Posted as a remix for a commenter on my make of the ideal "Satsana Duct Remix for Ender 3v2 - integrated BLTouch mount (4010 + 5015 fans)" , plus the following changes: Added a cross bar between the front of the BLTouch mount and the main…
If you appreciate my work and like it, you can buy me a coffee ;) but this is absolutely not expected. Short introduction: The alignment of the magnet and encoder is the most critical factor for the mechanical precision of the steering…
This design is fully 2D printable in A4 format, but was still a challenge to create. I wanted to create a guide for assembly and figured it could be interesting to others. For more details, please visit the original listing on…
From Russia with love. Use parts 003 and 004 to assemble the size you want. Use parts 005 and 006 to attach the pegboard to the wall. UPD: I made parts 007 and 008 to use in case the pegboard is lousy Используйте детали 003 и 004 чтобы…
Remixed the Ender 3 S1 assembly to include the S1 Pro parts
It's finally ready! This eye-catching design is a must-have addition to your engine collection. About the original engine: What we have here is a “lost” jet engine design the Propfan, that was intended as a fuel-saving alternative…
Perfect for holding thick cables like sound and guitar cables, heavy ropes, extension cords, etc… With a hole for hanging. Heavy duty and reliable, does not release without pressing the lever. The clip is adjustable to different thickness…
Newer Version available This bearing works well but I revised the cap interfaces to get a tighter fit and better lateral fit, see: https://www.printables.com/model/1715172-a-better-608-bearing Description This 608 bearing is entirely…
Check out the following video for the trick i used to easily engrave any design on this print-in-place hand fan. ▶ Leave a comment if you would like me to also upload the .BLEND file so you can try making your own hand fan designs. 😉…
Disclaimer : this model is a work in progress and it may contain some dimensional inaccuracies. This model is meant to be used as an asset in CAD software. I don't recommend to print this model as it is. It's not optimized for FDM…
This is a simple lock box with 3 digits. Dial in your combination and unlock by pulling the lever to the left. Setting combination Combination cannot be changed after print. But to create your own combination: Open the .blend file with…
Prevents dust and filament debris from entering the Z-axis holes, protecting the mechanism. Three guards are required per printer. If printed in a textured sheet, the guard is almost invisible. Key Features: Protects Z-axis: Prevents dust…
*ADDED Z-AXIS DRAG-CHAIN MOUNTS. To fit a Drag-chain to the Z axis with the Belted Z you will need: MOTOR_MOUNT_Z_CHAIN_V1.1, Z_LOWER_MOUNT (V1) v1 BELTED_Z_BELT_NUT_MAIN_V1.1 BELTED_Z_BELT_NUT_CAP_2X_V1.1 ZX JUNCTION (V2) X MOTOR CAGE…
![Dummy 13 [BETA] Assembly Instructions](https://media.printables.com/media/prints/870301/images/6680884_f72690ba-3c09-4865-bf8c-ca848404b76d_67244405-f71f-4ba5-ac30-897bb3016af5/assembly-guide.jpg)
