816 models
15 Minute calibration test. Used to compare Prusa Mk3S, Prusa MINI, Ender 3 Pro, PLA, PETG, ABS, ASA, TPU on youtube. You can see the results here: https://imgur.com/gallery/AVIMRUl The overhangs are 10,20,30,40 degrees. The hex hole is…
Human ankle with complex fracture, AO classifiacation 44B3.2 The model is created by conversion from CT scans, i.e. from DICOM files to stl file. Printing is necessary with supports, organic ones are recommended.…
I'm a happy user of @Stephenlofgren's TYWE3S jig. Since the carrier board dimensions for the CB3S are identical, I thought I could get away with using it to flash OpenBK onto a Xenon SM-SO301U power strip. After a lot of fiddling and…
A really good working, 4 inch by 4 inch coaster. Made by me! Works on almost every common cup size, even those big mugs that every mom has :). Hope you guys enjoy, feel free to edit the file. It takes 3-4 hours to print. If someone wants…
Handle for internal freezer from Gorenje RB3092ANW fridge. Recommended to print with white ABS plastic.
A simple EBB36 CanBus Board Mount with Cable Strain Relief for the Orbiter v2.0. It's designed to be printed in ABS, as the little LDO motors get Hot, and to be attached via a Female-Female M3x15mm (if you have an OS2) or M3x20mm Hex…
This project is currently in BETA (as of April '24) Specifically, the longevity and durability of the PLA+ printed locking pin needs to be further tested. UPDATE: A new experimental Reinforced Locking Pin has been added to the print…
The articulated tank chassis by EXTREME3DPRINT is available for purchase here: https://cults3d.com/en/3d-model/gadget/pipbot-1-print-in-place-robot Inspired by the models from FAB365: http://www.fab365.net/ My design process is covered in…
1:22 scale Bell 206 B3 r/c helicopter on OMP M2 mechanics Print instructions Updated 13/05/2021 to rationalise the landing gear parts so that they are easier to print and assemble. I've reprinted mine in PC Blend so that the landing gear…
Here is an EBB36 cover. I found some of the cables going to the board in the rear would interfere with the rear right back corner of my Voron v2.4 while homing if not inside of the cover.
here you have the CAD file for the EBB 36 CAN board hat If you want to buy this awesome tool board use this affiliate link http://shrsl.com/4t5zy and you will support our work
This model is currently for the 1.0 version of the EBB36 board. The screw and strain relief positions changed on the 1.1 & 1.2 versions. The Big Tree Tech EBB CANbus boards are a nice way to cut down on wiring to the toolhead. They're…
This is just a small strain relief bracket I made specifically for my Voron V0.1 where I did not want to use a bulkier cable gland. The umbilical for the V0.1 is very short and lightweight, so this works well to secure it. I wouldn't use…
Here are some stairs that fit with Ulvheim B. The rest of the Ulvheim designs can be found here: https://www.printables.com/@Terrain4Print/collections/153505 To be totally honest, I'm not entirely happy with the design. But it is a first…
I loved Zachary's model however noticed the new V1.2 of the BTT EBB36 board is larger and the model doesn't fit the board, I recreated a new version in Fusion360 for the new dimensions and it works a treat :)
This is my take for EBB36 canbus board holder for Voron Stealthburner. I have taken model from Coxie and pretty much redesigned it. Now this mount is thicker, more rigid and uses M3 screws to clamp cable. Print with standard Voron…
This is a splitter that turns one fan header into two. It makes it much simpler for wiring up toolheads that have two part cooling fans (Dragonburner, Xol, etc). There are two types of the main body. One designed to fit in the space on an…
Simple stand for model of Millenium Falcon created by GOODESIGN from website Fab365. https://fab365.net/items/277 stand is 115 mm tall and useable for rear left pocket for landing gear. Model is rotated 5 degrees down in front direction…
***Important update*** I uploaded the wrong file so please redownload if you grabbed files before 2024-03-04 There were a couple things I didn't like about the original design. I found the walls of the gland threads had unusably thin…
EBB36 Mount Orbiter v2 with PG7 Cable Gland -- Remixed from https://github.com/KayosMaker/CANboard_Mounts --
NH36/EBB36 WWG2 mount for PUG I find PUG to be far superior to PG7 mounts, so made this guy. Additionally, the NH36 connector sticks up really high, so this also lowers the cable a bit. This is based off tetsu and Thor's existing canboard…
Since i run a CAN setup i've remixed a mount for my EBB36 on my toolhead. I've included a PG7 gland holder so that i was able to mount it close to the toolhead and ran my umbilical wire through it. Since i currently run Tap i also made it…
Print with Voron default settings. If you get problems with your threads, use higher fan speed. Don't forget the heat inserts from the original model.
BTT EBB36 Umbilical Strain Relief for Stealthburner Works both as a mount for the BTT EBB36 on the Steathburner CW2 but also has strain relief. Mix of two other makers models. Requires two m3 heat inserts 3 versions - 58mm, 65mm and 70mm…
On my Voron 2.4r2 i have an BTT EBB36 v1.2 installed. Since the board is mounted on the back of the LDO Nema 14 stepper behind a ClockWork 2 the cables came extremely close to the drag chain when homing. Also the wires were exposed on the…
Needed a bit more vertical clearance for the EBB36 on my StealthChanger build so I created this mount/carrier for it and also tried to get it as rigid as possible with just the two mount points. There are two versions, one where the EBB3…
Found over at https://sketchfab.com/models/2601297f223a441086c7a44fc34a879d And a special request by Corey http://www.thingiverse.com/ROCKETNERD/about Good luck with printing and post the results : ) Merry Xmas Jace PS I've uploaded all…
This is a rigid mount for the BTT EBB3.6 v1.2 toolhead board on the ClockWork2 / Stealthburner. The plate is supported on three points and a lot more rigid than other solutions. It was only tested on a Voron Trident. No tests currently on…
Voron v0.2 toolhead mount for Bigtreetech EBB36. Note: remote intergrated strain relief plate support before assemble.
Wall mount for Makita DUB362 Leaf Blower no support need the design was made to store it with or without battery
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) I remixed this part, because the original was great by design, but was missing a strain relief. so here it is. also use the original or 18mm…
A simple EBB36 CanBus Board Mount with Cable Strain Relief for VZBot Printhead CNC V2 It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5 mm It's…
I was unhappy with the temperatures my EBB36 was reporting when running longer prints in a well insulated chamber. So I whipped up this quick mount for a 3010 fan that also attaches the EBB36. You will need 2x M3x35 or longer screws to…
Please be sure to hit the like button as this really helps me out here! Also be sure to post a make too! Would love to see your prints & installs! Here's my remix of these awesome files from chirpy2605 to bring them all together in this…
NB3D Spool Adapter Ring V1.3 200/55 This adapter ring is designed for use with the Bambu Lab AMS. It snaps onto the spools tightly and uses teeth inside to prevent the ring from slipping around the spool. This adapter ring also works on…
Rail mount for the BTT EBB36 and EBB42 Gen 2 USB adapter. 12/31/2025: Added model with 2.8mm screw holes instead of heatsink inserts Uses: 4x M3 Heatsink Inserts (not needed for "no-inserts" version) 4x M3x6 Bolts 2x M2x8 Screws Uses this…
I printed it (also) in PLA, PETG or others more solid materials would be a better decision, IMHO. It turns out this device wasn’t really made to lean against the wall, so I did what any person with a 3D printer would do: I printed a wall…
Die Neuauflage von B3D-Autodarts-Automatic-Score System ist nun endlich verfügbar. Automatische Darterkennung? Mit Autodarts & Co. Kein Problem. Aber wie oder was erkennt die Darts? Dafür benötigen sie zbsp. Solch ein Set, um Kameras…
HI, I would like to share my adapter to mount BTT EBB36 on VZ Alu Printheads. It is designed for: BTT EBB36 V1.2 + VZHextrudort LOW PLUS + MOONS Stepper and Alu printhead. I did not test it with other motors like LDO (height may vary).…
This is a work in progress project from my side, so there might still be some small bugs. I made a custom version of the new archetype blackbird toolhead for my needs. I have created a new core for my needs, to get use of a bambulab…
On my Voron 2.4r2 i have an BTT EBB36 v1.2 installed. Since the board is mounted on the back of the LDO Nema 14 stepper behind a ClockWork 2 the cables came extremely close to the drag chain when homing. Also the wires were exposed on the…
added a fan without srews (tight fit) and strain relief with seperate cable holder and some extra space at the back for the fan mos for the mellow fly . Fan size 3010 strain relief uses 3mm bolts with hexnut. Update* new cable strain…
This is my take on EBB36 canbus board holder for Voron Stealthburner. I have taken the model from Kotvic (Thank you!) and pretty much redesigned it to address some issues I have found with the original model: Heat inserts holes were too…
EBB36 GEN2 Mount for A4T Toolhead with Orbiter v2 / v2.5 Mount for installing a Bigtreetech BTT EBB36 GEN2 toolhead board on an A4T toolhead using an Orbiter v2 / v2.5 extruder. This is a remix of the original A4T THB mount from Armchair…
EBB36 mount for Galileo 2 standalone extruders
Made this strain relief for my Xol toolhead, but it will work for any tool head that uses the Ebb36 and Orbiter v2.
closed cable hole on top added 30x30 fan with mouning holes Now nicely closing all cables with the EBB36 mod on Stealthburner.
So i got the EBB36 v1.2 and usually people use it with Umbilical, but i wanted to use drag chain instead and i couldnt find a decent one, the ones that i found usually had the canbus sitting so low that the heater wires would rub against…
A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Wristwatch BMG extruder. The original PUG download page (for the gland itself) is at…
I started with Dante's IO Shield blank and laid over an image of the IO shield. I converted the layout image to an SVG file and used Tinkercad to cut the port locations into the blank. I got it first try but the IO shield was a tight…
Edit: 20.03.2025 - add STEP file EBB36 bracket for Orbiter 2.0 I don't like flat and high mounts so I propose my vision. BOM 4x M3 threaded inserts (i use M3 x 3.0) 1x flat head M3x5 screw for install a cable holder 2x socket head M3…
Wall Art Silhouette model of the AS 350 B3 helicopter. Adjustable size. I accept model suggestions or ideas you have.
1:1 of the ASUS ROG STRIX B360-I GAMING mini-ITX Motherboard.
This will allow mounting an EBB36 board on your V0.2, the cable can be fixed with a zip tie and everything is designed to be installed without heatset inserts ! There are two versions of spacers : one for Orbiter filament sensor and one…
UPDATE: Cable relief geometry fix in v5, cable is more centered now. Some other minor geometry fixes. Mount for installing a Bigtreetech BTT EBB36 GEN2 toolhead board on an A4T toolhead using a WWBMG extruder . This is a remix of the…
Both great models just changed slightly so the mount is compatible with the 6.5 mm PUG
Mixing using EBB36 and LGX lite with cable chain hook.
A mod focused on fitting all hardware of LGX Lite extruder, BTT EBB36 (V1.2) board and umbilical PG7 mount in one fully enclosed and ventilated case. Used parts of toolhead from: - Eytecz's LGX Lite mount - Voron's repo including…
A mod for Voron Stealthburner LGX lite ERCF EBB cover. For those user that using BTT EBB36 v1.1 or v1.0 CanBUS board. Hardware BOM: Qty: 2, M3x30
Used in a Voron 0.2 setup with: Dragon Burner BTT EBB36 CAN board - **warning**: not compatible with max31865 for now! Sherpa Micro extruder BOM: 2x 25mm aluminum standoff 4x M3 x 6 mm BHCS 2x M3 x 10 mm BHCS 2x M3 x 4 x 5 mm heat insert…
This is a mount with strain relief to use the Bigtreetech EBB36 toolhead PCB with an LGX Lite extruder on an EVA 3.x carriage platform . This is a remix of the mount for the Orbiter 2.0 extruder by Iatraliptes . I recommend using a USB…
A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Galileo 2 Standalone extruder. The original PUG download page (for the gland itself) is…
A toolhead mount based around therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with an Orbiter 2 extruder. The original PUG download page (for the gland itself) is at…
DIN rail bracket for the BigTreeTech EBB 36 & EBB 42 GEN2 USB Adapter board. Designed to use (4x) m3 heat set inserts. DIN Rail Clip Used
A mount for the EBB36 to mount the can board on the back on the Galileo 2 extruder. Version 2
I have recently bought a VZ-Hextrudort-Low extruder and needed a new mount (along with a new upper Stealthburner body). Didnt find anything that I like and I was already satisfied with my SB mount so… I made a remix for that same mount.…
A simple EBB36 CanBus Board Mount with Cable Strain Relief and PG7 mount for VZBot Printhead CNC It has an elevated cable holder so that the can connector goes straight to the holder it also has 3 mounts for zip ties with a width of 2.5…
UPDATE: Version 2 uses the same holes that mount the EBB36 to interface with the extruder mounted standoffs and moves the bottom holes approximately 16mm downward to create more clearance for hotend wires from the terminal block. The…
I've simplified this design for easier milling on a CNC Machine or metal 3D printing. A simple EBB36 CanBus Board Mount with Cable Strain Relief for the Orbiter v2.0. The EBB36 mounting holes are designed to be tapped with an M3 tap. It's…
I came across this on Tinkercad, but it contained quite a few errors in the model, misaligned bits etc. So I cleaned it up and made it more printable and now it lays flat on the print bed, the slats are properly meshed with the crate body…
This is a display stand for the excellent (Free to download!) FAB365 Star Destroyer model (Designed by GOODesign studio). https://fab365.net/items/505#inform I actually thought this was going to be easy but the centre of gravity is not…
This modification allows for mounting of the CAN board on the side of the Turbiter. You will need 2 M3 heat set inserts to mount the board. As a Voron 2.4 owner, I wanted to run the Turbiter mod for the Orbiter 2.0 so I could run the…
Please note: I've designed this while away for work so I haven't had a chance to try it out for myself, but if anyone has a chance to give this a go for me, any feedback would be greatly appreciated!…
I don't want to create a new project for each accessories I create for Honeycomb storage wall so here are all of those I created. Cable box as cable storage (90 and 120mm) Magnifier holder (~85mm) Holder for OWON B38T FreeCAD source file…
This 3D printable file provides a precise and efficient solution for mounting either the EBB36 or SHT36 canbus board onto the Vz Hextruder CNC, complete with a PG7
Din mount for the usb adapter board. Can use normal din clip or heat insert type
a horizontal drag chain mount for the ebb36 on a xol toolhead
cooling for EBB36 v2 - fan shifted for better access to the IO pins
Wrist Watch Galileo Extruder - SHT36 Max V3 toolboard mount - other toolboards may fit. Required to be remixed to fit Mello Over Molded cables and Xt30 connectors Requires use of Heatsert brass threaded inserts Mainly designed for use…
This is a newly designed adapter for the VZ-HextrudORT paired with an EBB36 CANBUS board. an ercf filament sensor is integrated (if you want) a cooler for the board (if you want) It should also fit the FLY SHT36, but unfortunately I can't…
A simple wall mount to hang the Makita Leafblower DUB362 by using an existing hole.
Hallo, ihr wollt die Druckdateien von Viperman3 nutzen und auch eine Grundplatte für euer System verwenden? Kein Problem, dann druckt einfach die Füße von mir und verwendet diese dann mit den anderen Dateien von Viperman3. Meine Füße…
After trying out another mount found here I noticed that the ebb36 was uncomfortably low. To point of risking a fire, the heater ports are too close to the VZ CNC Toolhead top plate. The can-board itself sticks out roughly 4mm above the…
The Powkiddy RGB30 is a retro handheld emulation game console that runs on Linux. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective case.…
Zur besseren Orientierung des Nullpunktes des 90° Winkelanschlages der Hammer K3/B3/C3 Maschinen. Drucken Die Druckteile sind leicht herzustellen, die Auswahl des Materials ist egal. Schichthöhe: 0,2 mm Perimeter: 5 Stützen: ja…
This is a work in progress project from my side, so there might still be some small bugs. I created a custom version of the new archetype blackbird toolhead for my needs. I created a new core, to get use of a nf-crazy volcano hotend in…
This model is modified from KayosMaker canboard mount https://github.com/KayosMaker/CANboard_Mounts It is design specialised for mounting BTT EBB36 canbus board on Voron Stealburner CW2 and can still use dragchain for cable management…
Remix to support a 2 hole drag chain. Update: Seems like the original 3 hole and the 2 hole remix did not work. I made a new version that's been tested now and works well. I did desolder, flip, then resolder the hot end heater connectors…
EBB36 mount and cover for a pg12 cable gland. UPDATED: in the new model the cable gland mount screws on the ebb36 mount to make it more rigid and easier to disassemble, might make more changes later on. *****The canbus cable is soldered…
The new EBB36 Gen 2 has a different type of CANBUS connector. I wanted a new bracket to hold the plug stable on the EBB36. I found a suitable design by @1word4WORDS_2139936 for the WWG extruder. This remix tidies up the design to suit a…
My latest nerf sniper rifle. Unbelievably accurate. Easy build. Hardware can be found on my shop: https://moosemodshop.com/products/b34r-double-stack-bolt-action-rifle-beta-5-hardware-250-fps Assembly Guide: Google Drive Link - more…
Simple & ful frame for u VW passat b3 will be happy for u comments
I started with version one by making the stand fit the Tie Interceptor exactly. This had a elogated base to shift the centre of gravity and stress supports to make the structure stronger. I then tried to simplify everything. It turned…
Is this modification well done? No… Does it work? Probaby. I couldn't find any mount for the WWG2 extruder that worked well with the new EBB36 Gen2 toolhead board. Hopefully someone makes a better design so you don't have you use this.…
I needed strain relief for the connector on the FLY SHT-36 V3, but I wanted the board mount to be more rigid on the toolhead. So I added mount points for the bottom two attachment points on the x gantry.
I didn't feel like removing my cable chains or worrying about Z chain clearance, so I made this side mount for the BigTreeTech EBB36 CAN board that fits on the galileo extruder . Print in orientations provided. You'll need three m3 heat…
the spacers must be cut to fit the orbiter stepper motor; it is designed to put the M3 4.6mm diameter brass inserts: I left a hole to display the led of my USB Type C; the possibility of fixing it with three screws to the EVA 3 support…
A modern enclosure for this fantastic Mikrotik device with the following features: Very tight geometry. Follows Mikrotik Branding Guidelines. Air ventilation placed where heat is mostly generated. Textured enclosure for less 3d…
Featherboard for the circular saw for mounting on the fence and the sliding table on a Felder/Hammer K3/B3
