Search results: batter

Sort order

15,886 models

P
PrintablesCAD-Guy

Customizable & stackable beer crate for all types of batteries

Customizable and now also stackable beer crate for all types of batteries: The AA-crate can hold 12 Batteries The AAA-crate can hold 20 Batteries The 9V-crate can hold 5 Batteries The 18650-crate can hold 6 Batteries but is 18mm higher…

Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant

Downloads
98,219
Likes
23,532
Rating
4.92
P
PrintablesSpock

GoPro 9/10/11/12 - Rugged Case 2 Battery Box

UPDATE 12 November 2023: I've received a consistent handful of messages from people who have been downloading the wrong original files so I've reuploaded the correct lid/seal files here as well. UPDATE 13 July 2023: Added a version with…

Print approx. €4.48–€5.47 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5,358
Likes
1,190
Rating
4.93
P
PrintablesDIY Machines

How to make Desktop Neon Signs - 3D Printable, Battery or USB powered & Dimmable!

Please take a moment to like this project and download it from Printables - it really helps me out! Thank you Today we’re making some of these awesome customisable desktop neon signs. These ones can be powered by either a USB cable or 4 x…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
4,376
Likes
1,611
Rating
4.93
P
PrintablesFestool

Festool Battery holder 18V

Festool Battery holder 18V - simplify your tool management Tired of searching for your power tool battery? Mount your battery on the wall for quick access, while organising them according to their charge status. Make your everyday work…

Print approx. €2.57–€3.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,410
Likes
281
Rating
4.93
P
Printablesdhiltonp

Gridfinity Battery Box: CR2032/CR2016, 357/303/SR44 and A23/MN21/AAA slots

This is for Zach Freedman's Gridfinity. It can hold 22 CR2032 or 44 CR2016 batteries, 12 357/303/SR44 batteries, and 2 A23 batteries (commonly used in garage door openers). The A23 slots can hold AAA batteries, but the holder will no…

Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant

Downloads
2,868
Likes
552
Rating
4.9
P
PrintablesJKM

battery holder - Parkside

držák baterie Parkside na zeď

Print approx. €4.02–€4.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,460
Likes
93
Rating
4.67
P
Printablesthrasher

Xbox Controller Stand w/AA Battery Storage

About The Minimalistic Xbox Controller Stand by @agepbiz is quite nice. It offers a nice positive placement feel of the controller into the stand. It's also super minimalistic and perfect for modification. I was able to add slots for six…

Print approx. €5.71–€6.98 excl. taxPreliminary estimate for one variant

Downloads
2,326
Likes
378
Rating
4.88
P
Printablessternli27

Bosch Professional 18V Battery Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…

Print approx. €4.30–€5.26 excl. taxPreliminary estimate for one variant

Downloads
1,988
Likes
239
Rating
4.6
P
PrintablesMatt Boyer

DeWALT Battery Holder

A simple battery cradle with a color change to pop out the brand name. Can be standing on your bench or mounted on the wall. The infill is strategically modified to withstand use and mounting. Open hex pattern allows you to press and see…

Print approx. €5.71–€6.98 excl. taxPreliminary estimate for one variant

Downloads
1,464
Likes
248
Rating
5

Milwaukee M18 BatteryHolder

Hi! Hier ist mein Batterie Halter für die großen Milwaukee M18 Akkus! Ich habe es mit PETG gedruckt und habe Supports zwischen den Schienen gedruckt (siehe Bilder) Ich habe die Version verbessert da noch ein kleiner Fehler sich…

Print approx. €3.06–€3.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,425
Likes
181
Rating
4

Dewalt 20v Battery Wall Mount / Holder - 20 Volt Lithium Ion

Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here's a minimalist wall mount…

Print approx. €3.62–€4.43 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,360
Likes
226
Rating
4.94

RIDGID Tools Double 18V Battery Holder with Slant

RIDGID Tools Double 18V Battery Holder Simple battery holder for storage of your RIDGID batteries while not in use. Batteries slide in and out with ease while maintaining enough grip and stability to keep them secure. The fit is snug and…

Print approx. €7.36–€8.99 excl. taxPreliminary estimate for one variant

Downloads
1,260
Likes
120
Rating
5
P
Printablessternli27

Makita 18V Battery Connector Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Bosch 18V Professional Batteries, see my design here: https://www.printables.com/model/427974/ For Milwaukee M18 Batteries, see my design here:…

Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant

Downloads
1,086
Likes
109
Rating
5
P
PrintablesAllpa

Milwaukee M18 Heavy-Duty battery holder (High Demand & Forge) // Milwaukee M18 Akku-Halter (High-Output & Forge)

Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…

Print approx. €3.17–€3.88 excl. taxPreliminary estimate for one variant

Downloads
980
Likes
97
Rating
5

Roku Remote RC-EL3 Battery Cover

Battery Cover replacement for Roku Ultra remote model RC-EL3 Print horizontally with curve up, requires supports. This will reinforce the locking tab. Be careful when removing supports to not damage the bottom alignment tabs.

Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant

Downloads
922
Likes
64
Rating
1
P
PrintablesNils Kal

Double Helix AAA Battery Holder - with optional extra compartment

Double Helix AAA Battery Holder - with optional extra compartment This is a fun little print that not only looks neat but holds up your AAA batterys. There are two different versions, one has some extra storage for batterys inside the…

Print approx. €6.95–€8.49 excl. taxPreliminary estimate for one variant

Downloads
889
Likes
262
Rating
5
P
PrintablesAnthonyMakes3D

Accessible AAA to AA Battery Adapter

Out of AA batteries but have AAA's? Country in lockdown or you don't want to risk getting COVID-19 going to the store? Well, I've created a AAA to AA adapter. All you need is a 3d printer, a AAA battery and some tin foil/pop can. Print…

Print approx. €0.53–€0.64 excl. taxPreliminary estimate for one variant

Downloads
883
Likes
74
Rating
5
P
PrintablesBootjevaarder

Eufy 2K (Battery Powered) Doorbell Wedge 35-55 Degrees

With this 45 degrees doorbell wedge you will be able to adjust the viewing angle of your Eufy doorbell camera. By adding the 5 or 10 degrees wedges you can extend the camera angle. You will need 2 extra small selftapping screws to attach…

Print approx. €1.60–€1.96 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
741
Likes
44
Rating
5
P
PrintablesArczi

2x AA Battery Box for Repairs

Modification of the model by Plutho to accommodate two instead of three AA batteries. This model may need to be customized as needed.

Print approx. €1.81–€2.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
717
Likes
81
Rating
4.8

1S LiPo Case - Battery Case for 450/550 mAh batteries

My daily use 1s LiPo battery case. Very lightweight at only ~35g per case. It fits any pocket. I can keep track of used and unused Lipos by taking new ones from left to right. It does fit the charger/Lipo-checker from BetaFPV. 450 and 550…

Print approx. €2.44–€2.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
641
Likes
67
Rating
5
P
Printablessmdollins

2025 Coin Cell Battery LED Light

I needed a reusable way to attach a coin-cell battery to a single 3v LED as well as something I could hand to just about anyone without any explanation and they could figure things out just by looking at it. Just enough of the battery…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
616
Likes
76
Rating
5
P
Printables¯\_(ツ)_/¯

Aufbewahrung AA Akkus (HR6) oder AAA Akkus (HR03) Leer und Voll geladen Batterie box battery storage holder empty full charged

Find english version below... Box bzw. Behältnis zur Aufbewahrung von AA-Akkus (HR6) und/oder AAA-Akkus (HR03). Unterschiedliche Bereiche und Farben dienen der Unterscheidung ob die Akkus VOLL aufgeladen oder LEER sind. Die…

Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant

Downloads
594
Likes
64
Rating
4.8
P
PrintablesPaPa Dad

Replacement Battery Cap for Ryobi 4V Lithium Tools

My Littelest Great Grand-Daughter borrowed one for her kitchen and didnt return it, so i decided to try and design one. I came up with two versions. One is Bigger & more Rugged The Other is slightly smaller and fits better than the…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
581
Likes
70
Rating
4
P
PrintablesMatthias

Akku-Tragegriff für zwei Einhell-Akkus - Battery Tray to carrie two Einhell batterys

zwei Akkus von Einhell in einer Hand tragen die Akkus können auch einfacher getragen werden, wenn sie nicht im Gerät sind ideal für 36V Geräte von Einhell, bei denen zwei Akkus benötigt werden die Kontakte der Akkus bleiben geschützt -…

Print approx. €2.90–€3.55 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
561
Likes
69
Rating
5
P
PrintablesSHR3D.eu

Quicko T12 battery pack (Makita 18V, Parkside 20V)

Easily printable extender for Quicko T12 microsolder and its other clones of the same size, which allows this microsolder to be elegantly operated on batteries designed for Makita or Parkside hand cordless tools, which is useful not only…

Print approx. €2.49–€3.05 excl. taxPreliminary estimate for one variant

Downloads
474
Likes
99
Rating
5
P
PrintablesPatrik

Gridfinity bins for CR2032 batteries

Gridfinity battery bins for CR2032-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 8 batteries. A 1x2x4 bin that fits 16 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant

Downloads
471
Likes
44
Rating
5
P
PrintablesJankieL

Milwaukee M18 battery extension

This is an extension for the Milwaukee M18 battery. You can double or triple the battery capacity from 1.5ah to 3ah or from 2ah to 4ah or go higher from 5ah to 7.5ah or 9ah. 19mm is double the capacity 37mm is triple the capacity 55mm is…

Print approx. €1.85–€2.26 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
459
Likes
81
Rating
5
P
PrintablesPea Prog

GoPro Battery Organizer for Original GoPro Case

A simple, stylish, and effective ways to organize your batteries inside your GoPro carrying case. If you're like me, you probably like to put your GoPro, batteries, and various accessories inside the original carrying case when you're…

Print approx. €4.17–€5.09 excl. taxPreliminary estimate for one variant

Downloads
427
Likes
91
Rating
5
P

AA to D battery adapter

4 versions 14.6 mm battery hole and thread for M3 and M4 screw. 14.8 mm battery hole and thread for M3 and M4 screw. I used M3×10 and M4×12 screws. 🔋IKEA LADDA Rechargeable battery, HR06 AA 1.2V, 2450mAh – version 14.6 mm. 🔋LIDL TRONIC…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant

Downloads
423
Likes
69
Rating
4.5
P
PrintablesRae

Gridfinity AAA battery storage

This model uses the Gridfinity plugin to Fusion 360. The modeling is fairly basic after that, a negative extrude with an edge fillet. This then uses the rectangular pattern feature to build out the rest of the slots for the batteries.

Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant

Downloads
409
Likes
33
Rating
4.8
P
PrintablesREMLURELMI

9V Battery Terminal Protector

Terminal cap for 9 volt batteries. Marked with “9V”, quick print. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15 Supports: No Print Orientation: Default as modeled Material: PLA Raft: No Brim: No

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
398
Likes
106
Rating
5
P
Printablesbkgoodman

ESP32 DevKit V1 +Battery Case

This is case is used to take an ESP32 DevKit-V1 which can run off battery power - i.e. no wires. So - I wanted a cheap and easy way to battery power my ESP32. But - A normal AA battery is rated to about 50mA, and only runs maximally at…

Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant

Downloads
383
Likes
28
Rating
5
P
PrintablesMe

Protective storage case for 18650 battery

I designed this experimental case to protect my 18650 batteries from short circuits in storage. The two halves screw together, creating a cover that protects the battery. I printed it with Elegoo pla, using variable layer height (0.3mm,…

Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant

Downloads
380
Likes
41
Rating
5
P
PrintablesAntro

DJI mini 2 (Mavic mini 2) battery extractor

There are two options: simpler, thinner version bit bigger v2 with small grips for more comfortable use I recomend to print without supports but enable all option showed below You probably should print it with supports if you want make…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
353
Likes
71
Rating
4.4
P
PrintablesKusz

Rugged Makita Battery Holder

Print out of PETG for best results. Makita battery holder used and improved over the last couple of years. The rugged design holds up to construction site wear. Designed a wooden carry handle to mount the battery holder.

Print approx. €3.79–€4.63 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
349
Likes
76
Rating
5
P
PrintablesPELU

Hilti B22 Battery Holder

A battery holder for Hilti B22 Battery for the workshop, garage or your work van. Importen info about Gcode: It print with a 2mm brim to add strengh to bed. I just took a deburrs on the bottom edge and it was perfect after. The 2 holes to…

Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
329
Likes
23
Rating
0
P
PrintablesPatrik

Gridfinity bins for CR2450 batteries

Gridfinity battery bins for CR2450-batteries. The bins can be stacked. Included bins: A 1x1x4 bin that fits 5 batteries. A 1x2x4 bin that fits 10 batteries. The base box is generated with the Fusion 360 GridfinityGenerator,…

Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant

Downloads
321
Likes
21
Rating
5
P
PrintablesBlu3.Berry

AKAI MPC ONE+ tilt stand and battery mount

This is an AKAI MPC ONE+ non-destructive mobility mod. To attach the stand to the drum machine I used the same screw holes that were used to attach the factory rubber feet. I didn't want to glue the factory feet to the printed stand, so I…

Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant

Downloads
320
Likes
21
Rating
5
P
PrintablesTache

SKADIS Dewalt 20v Battery Holder

This model is a SKADIS holder for Dewalt 20v Batteries. It uses the SKADIS T-Clip system designed by @LineArcLine . It is designed to be easy on and off, bypassing the latch.

Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant

Downloads
318
Likes
46
Rating
5
P
PrintablesJPMakesStuff

Battery Power Tap (slim) compatible with Ryobi 18v

Ryobi battery mount with option for electrical connections. Wall mountable with two flat head screws. Easily store spare batteries on your workbench, or connect them to other electronics (maybe a battery backup for your 3D printer ) See…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
311
Likes
59
Rating
5
P
PrintablesPombay

Muli bicycle (E-bike) battery rain cover / Shimano BT-E8010

Would appreciate your make, a like and/or voting ;-) The wonderful Muli cycle carrier bike (https://muli-cycles.de/de/bikes/motor) has one weak point. When the bike is set out to rain/ wet weather-conditions, water tends to stay in the…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant

Downloads
298
Likes
10
Rating
4.5
P
PrintablesPaul

FRITZ!Fon MTF Battery Cover

This is a replacement Battery Cover for the FRITZ!Fon MTF. You definitely need to enable supports for Printing.

Print approx. €0.62–€0.75 excl. taxPreliminary estimate for one variant

Downloads
280
Likes
11
Rating
4.75
P
Printableso._sim_.o

Mobula 8 Alternative Battery Mount

The stock battery mount on the Happymodel Mobula 8 likes to break after some not-so-soft landings and snaps where the two crossbars connect to the side of the battery holder. This model replaces the crossbars and hooks into the sides of…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
276
Likes
20
Rating
5
P
PrintablesManeria

Dji Mavic Mini Battery Tool

A tool to release the Battery out of your Drone Print instructions Have fun with it...it works well ;)

Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant

Downloads
268
Likes
31
Rating
5
P
PrintablesGeorge75

BATTERY BOX - MICRO BOX

INNER BOX SIZE 58X100X56MM PRACTICAL BOX WITH SEAL AND CLOSING CLIP FOR STORAGE OF SMALL ITEMS. To assemble the box you will need 3pcs M3x30mm screws. Print out the battery box insert and you can store AAA and AA batteries in the box.…

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant

Downloads
267
Likes
48
Rating
5
P
PrintablesDennis

Würth Akku Wandhalterung/ Self-Locking Wall Mount for Drilling battery

This Model is designed to be mounted on different surfaces with M4-screws. It also has a self-locking-mechanism.

Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant

Downloads
262
Likes
14
Rating
5
P
Printablesjefftml

Charged and Dead Battery Beer Crates [Remix]

I printed these in green for charged, and grey for dead. Be sure to print off as many “Stackers” to make the crates fit into each other and stack much better. Remix of CAD-Guy 's Customizable & stackable beer crate for all types of…

Print approx. €2.73–€3.34 excl. taxPreliminary estimate for one variant

Downloads
260
Likes
39
Rating
4.25
P
PrintablesMart80

Battery box

A great battery machine for AA batteries. The arm and base body must be printed with support geometry (everywhere). You need a knife to break out the support geometry where the loose part will later be inserted. But that should just work.…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant

Downloads
254
Likes
219
Rating
5
P
PrintablesJorge

Storage Tree - Leaf for Batteries

Introduction This module is part of the Storage Tree project . In case you've come across this model and are unsure of where it fits or its context, let me bring you up to speed... What is the Storage Tree or Modular Storage Tree. What…

Print approx. €11.70–€14.30 excl. taxPreliminary estimate for one variant

Downloads
248
Likes
66
Rating
5
P
PrintablesMichaelQ

Bosch 18V Battery Charger AL 1830 CV Wall Mount

Remove the screws on the bottom of your Bosch 18V battery charger AL 1830 CV, attach the wall mount and secure it with the same screws. The model was created with FreeCAD 0.21.1.

Print approx. €1.23–€1.50 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
239
Likes
22
Rating
5
P
PrintablesRay Fox

Battery Cover for Pittsburgh Caliper

Battery Cover for Pittsburgh Caliper

Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant

Downloads
217
Likes
10
Rating
5
P
PrintablesBuildComics

3M Adflo to Milwaukee M12 Battery Adapter

Can be used to run 3M adflo from Milwaukee M12 battery. To assemble you need to solder some wires and crimp some spade connectors. Use Large 6.3mm spade connectors for the Milwaukee battery side Use small 2.8mm male spade connectors for…

Print approx. €1.70–€2.08 excl. taxPreliminary estimate for one variant

Downloads
217
Likes
15
Rating
0
P
PrintablesRoadsideRC

Redcat Ascent Forward Battery Tray

A super easy print to keep your battery away from the gears on your Redcat Ascent. Here is where I installed it: No supports needed. I printed in PLA and it worked fine!

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant

Downloads
215
Likes
17
Rating
0
P
PrintablesDarazsweb

GoPro 9 Battery HardCase

This is a single GoPro 9 battery case with a slot for a micro SD card. Prints without supports, the only support needed is built-in, remove after printing. The 3mf file consists of the top and bottom parts, place them separately on the…

Print approx. €1.82–€2.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
215
Likes
57
Rating
4.5
P
PrintablesPatrik

Gridfinity bins for 10 * ER14250 (0.5AA) batteries + bins for LR41 & LR44

Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…

Print approx. €0.51–€0.63 excl. taxPreliminary estimate for one variant

Downloads
214
Likes
13
Rating
5
P
Printableskennyd1gital

Sordin Supreme Pro-X Battery Tool

A tool to aid in the installation and removal of the lower AAA battery in a pair of Sordin (formerly MSA) Supreme Pro-X electronic earmuffs. If you own a pair of these, you know how annoying it is to change the batteries because of the…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
210
Likes
12
Rating
5
P
Printablessternli27

DIY Makita Bosch 18V Battery Adapter Buck Boost Voltage Converter

Designed to fit a voltage converter model number: 4KX 18V Makita Battery Adapter: See my design here https://www.printables.com/model/436132/ 18V Bosch Professional Battery Adapter: See my design here…

Print approx. €7.66–€9.36 excl. taxPreliminary estimate for one variant

Downloads
206
Likes
57
Rating
0
P
PrintablesPatrik

Gridfinity D / R20 / LR20 battery bins

Gridfinity battery bins for D-/R20-batteries. The bins can be stacked by using the included spacers. A 1x2x4 bin that fits 2 batteries. A 2x2x4 bin that fits 4 batteries. A 1x2x6 spacer that is needed to stack the 2-battery bins. A 2x2x6…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant

Downloads
185
Likes
16
Rating
5
P
PrintablesTantalus

Mitutoyo Micrometer Replacement Battery Cover

This is a remixed project of the Mitutoyo Micrometer Battery Cover by GreatOldOne . After printing the original design by GreatOldOne, to replace a broken Battery Cover for our 1-2” Mitutoyo Mic. I noticed that the fit was not as I…

Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant

Downloads
184
Likes
7
Rating
0
P
PrintablesDanB

LabRadar Battery Holder

Holds the battery for a LabRadar Chronograph. Clips to either side of the LabRadar.

Print approx. €2.79–€3.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
183
Likes
6
Rating
5
P
PrintablesPatrik

Gridfinity C / R14 / LR14 battery bin and spacer

Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant

Downloads
183
Likes
11
Rating
5
P
PrintablesKarlIRL

Skadis Battery Holder (AA)

IKEA Skadis holder for up to 15 AA batteries. Only the upper two hooks need support. For AAA version, see here - https://www.printables.com/model/1095315-skadis-battery-holder-aaa

Print approx. €3.51–€4.29 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
179
Likes
16
Rating
5
P
PrintablesPatrik

Gridfinity bin for AA and/or C batteries

A compact stackable Gridfinity 2x2x9 with two partitions, each partition fits 20 AA batteries or 6 C batteries. It is not ideal for C batteries as the batteries can be hard get when the partition is full. The base box is generated with…

Print approx. €4.57–€5.59 excl. taxPreliminary estimate for one variant

Downloads
178
Likes
21
Rating
0
P
PrintablesTFL123

Gardena 18V Batterypack holder

It is a holder for the 18V Batterypack series from Gardena. The holder is designed in such a way that it can snap into place using the lugs on the battery and stays firmly in the holder without rattling. Perfect for mounting on a vehicle…

Print approx. €1.77–€2.17 excl. taxPreliminary estimate for one variant

Downloads
159
Likes
11
Rating
5
P
PrintablesJohan

Panasonic EY powertool battery adapter

I've seen loads of battery adapters for other brand power-tools but hadn't seen Panasonic adapters. So I've created this little piece of plastic myself. Now I can use my Panasonic battery packs (14.4V system) for other applications as…

Print approx. €3.25–€3.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
152
Likes
10
Rating
5
P
Printablestechfreek

Angled Wall Mount for Ego Battery Charger

A wall mount for a standard ego battery charger, but mounts the charger at an angle to allow for better space efficiency on your wall. Required Parts 2x M5 Heatset Inserts 2x M5 Thin Head Bolts:…

Print approx. €9.71–€11.87 excl. taxPreliminary estimate for one variant

Downloads
151
Likes
23
Rating
5
P
PrintablesGeoff

Efficient Infill-Divided Battery Holders

These battery holders are just really simple crate type, but with a difference. These were made completely in PrusaSlicer, utilising only primitives from the shape library and adjusting the perimeter and infill options to achieve an exact…

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
149
Likes
58
Rating
4
P
Printablesdjksicht

Parkside battery reduction vs Riwall

Parkside battery reduction vs Riwall mower

Print approx. €5.12–€6.25 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
149
Likes
12
Rating
3
P
PrintablesSorrow

Battery charger holder Bosch AL1830 cv

Easy and quick to print. These two parts allow the battery charger to be fixed vertically. It is best to print with supports. It is necessary to put slightly longer screws (3x25). I printed it with PLA.

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant

Downloads
146
Likes
18
Rating
3.5
P
PrintablesKarlIRL

Skadis Battery Holder (AAA)

IKEA Skadis holder for up to 21 AAA batteries. Only the upper two hooks need support. For AA version, see here - https://www.printables.com/model/1095309-skadis-battery-holder-aa

Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
143
Likes
21
Rating
5
P
PrintablesSarusani

TS100 & Battery Storage Box

The storage box is based on the Frog Box by Nibb Tardis . The interior is customized to hold a TS100 soldering iron, one additional tip, the hex key, some soldering wire and a 6S battery with the adapter cable. You'll need 8 20mm M3…

Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant

Downloads
135
Likes
39
Rating
5
P
Printablesastrophage

Fowler Caliper Battery Cover B1

Creating a Custom Tag I've been using my 6" Fowler Digital Caliper ( SKU: 541000002 ) without the battery cover for 2+ years. Finally I decided that I should get a replacement battery cover . …it cost $55! For only a tiny 1-gram piece of…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
133
Likes
2
Rating
0
P
PrintablesRigger64

Ozito Two Single Battery holders

This two Ozito battery holders are a result of printing the original file only to find that the double holder does not accommodate two 18V PXC batteries side by side. I printed the original make on my Voxelab Aquilia X2 with the model…

Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant

Downloads
127
Likes
7
Rating
0
P
PrintablesDW

Traxxas Maxx Battery Clip

This clip helps you to install a non Traxxas battery into the battery holder of the Traxxas Maxx. The dimensions of the battery are (mm): 138x49x46 (LxHxW). Additionally you need two narrow commercial velcro straps and two socket head cap…

Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
122
Likes
16
Rating
0
P
PrintablesScout339

18500 Battery cover for Xbox one controller

Makes it so your controller can accept 18500's (like the 18650 but shorter) so it will fit into an Xbox One controller. Use a little bit of aluminum foil to bridge between the spot where the other battery is supposed to be.

Print approx. €1.06–€1.29 excl. taxPreliminary estimate for one variant

Downloads
116
Likes
17
Rating
0
P
PrintablesMichaelQ

Stromer ST3 / ST5 Battery Cover Holder

It has always been impractical that the battery cover of the Stromer ST3 or ST5 does not remain closed when the battery is removed. With this holder, you can now keep the cover closed. And if it's not holding the cover, you can stow it…

Print approx. €1.02–€1.24 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
112
Likes
10
Rating
5
P
PrintablesMaximusV

Car Battery Clamp Fix

Just a replacement part for a cheap car battery pack clamp that broke, Streetwize brand from Argos. Measurements are not particularly precise but it fits and is functional. Draft print broke at a similar weak point so I reinforced the…

Print approx. €0.60–€0.74 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
109
Likes
20
Rating
0
P
PrintablesCoolBlackCat

Battery Holder on DIN Rail with drawer for used batteries

My remix includes a drawer for used batteries and is designed to be mounted on a DIN Rail. Fits AA and AAA batteries.

Print approx. €4.59–€5.61 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
108
Likes
15
Rating
0
P
Printablescomartist

Battery Organizer Tray for 111 batteries

This is a battery organizer. I wanted to organize my batteries. So I designed a battery holder to store different batteries. The battery organizer can hold 111 batteries. Works great for AA, AAA, 9V, A23, LR14, HR20, CR2430, CR2032,…

Print approx. €12.23–€14.94 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
106
Likes
12
Rating
0
P
PrintablesReed Bowman

Single AA battery holder for commercial contacts

Remix of Osfald's model to adjust it for a slightly different shape of 12mm square contacts. See photo. The model is otherwise unchanged, and it fits and holds a single AA battery very nicely. The contacts slide through the bottom of the…

Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant

Downloads
105
Likes
14
Rating
5
P
PrintablesGaius Pupus

Bosch Professional 18V 4x battery wall mount / holder with 3 scews (35cm long)

I have to use dowels for my wall mounting, so I made a bracket with only 3 screws for 4 batteries. What I could find was at least 2 screws per battery. Also, I didn't have much space in terms of width. I set 4 perimters arround the holes,…

Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
11
Rating
0
P
PrintablesMaxx

Fujifilm battery case - NP-W126

Wasn't comfortable carrying batteries with exposed connections in my pocket so i made this. I printed mine with PLA and ASA on Prusa Mini. They both work. I don't know how long the latch will last but it's a simple and fast print so it is…

Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant

Downloads
102
Likes
9
Rating
0
P
PrintablesJaneo

Insta 360 One RS replacement battery

Its function is to allow the camera to be used without the need for the normal battery. Instead, the replacement can be used while the camera is connected to a power bank or charger. This functionality is especially useful for creating…

Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant

Downloads
101
Likes
6
Rating
0
P
Printablesalain

Protectioncap to cover lead acid battery poles

when handeling those heavy lead acis batteries it comes handy to cover the poles to protect against short circuits.

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
13
Rating
0
P
Printablesroybijster

Fujifilm NP-W126S battery cover

A simple battery cover for the Fujifilm NP-W126S batteries with a small battery state window. Place the cover on the battery such that the orange circle on the battery shows through the window to indicate a charged battery. Place it the…

Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant

Downloads
98
Likes
15
Rating
5
P
Printablescrashkg

Festool 18V battery mount for Systainer

This allows you to mount your Festool batteries to the outside of your Systainer case. Print with Snug supports just under the overhang for the battery. Hardware needed 3x M3 Flathead bolts and 3x M3 Nuts. Makes and Comments Appreciated.…

Print approx. €2.12–€2.60 excl. taxPreliminary estimate for one variant

Downloads
97
Likes
19
Rating
0
P
Printableshandro

Sterilite Bin AA/AAA/9v Battery Inserts Parametric

Custom inserts organize AA / AAA / 9V batteries in 6 Qt. / 5.7 L Sterilite bins (model 1751). Has cylinders on the bottom to slot into the sides of the bin. However the bins aren't perfectly parallel so it fits better the close to the…

Print approx. €5.32–€6.50 excl. taxPreliminary estimate for one variant

Downloads
96
Likes
20
Rating
5
P
PrintablesPavel W

Battery holder HITACHI 12V

Holder for Hitachi ACCU ( EB 1214S) to power supply of watter pump. Print instructions Printed version 2 - Printed with supports, PLA PM Version 3 modified (smaller holes, wider cable path, cutout for battery hook) not tested.

Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant

Downloads
94
Likes
2
Rating
5
P
PrintablesMarin

Panasonic Screw Driver EY503 Battery conversion.

Lithium-ion Safety Concerns: If you do not know what your are doing or you do not have any experience about these batteries, do not play with them. They can store lot of energy, which can hurt you seriously and you can burn down your…

Print approx. €1.15–€1.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
90
Likes
5
Rating
4
P
PrintablesJirkaDe

tall battery cover for Nikon EN-EL15

A cover for protecting a spare Nikon EN-EL15 (or compatible) battery based on a great cover by @PiJey_88387 enhanced to also cover a USB-C charging connector found on a Jupio EN-EL15C ULTRA C battery. Printed in PETG with 0.2mm layer…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
90
Likes
10
Rating
0
P
PrintablesMadestCat

Gridfinity holder for Panasonic Lumix Battery Pack DMW-BLC12PP and DMW-BLC12E

This is a Gridfinity holder for the Panasonic Lumix batteries DMW-BLC12PP and DMW-BLC12E, used in the Panasonic Lumix FZ200 und FZ1000. It might fit more, but I can't really say which because I only have these two at home. ----- Dies ist…

Print approx. €0.65–€0.79 excl. taxPreliminary estimate for one variant

Downloads
89
Likes
9
Rating
5

AAA batteries stand

2x 15pcs AAA. Printed on PLA, speed.

Print approx. €4.13–€5.05 excl. taxPreliminary estimate for one variant

Downloads
85
Likes
10
Rating
5
P
PrintablesErwin

Canon LP-E17 battery "sleeve"

The STL file does not have the text on it. The gcode has (using prucaslicer).

Print approx. €0.78–€0.96 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
85
Likes
3
Rating
5
P
PrintablesIan Foulds

2 AAA battery pack minimal size

My son was designing a model plane that flies on a string. He needed a battery pack that fit into a 24mm circular cavity. I really liked msatbsx's modular design, it is great and flexible to work with. However it was a little too big to…

Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant

Downloads
83
Likes
6
Rating
0
P
PrintablesDimbulb

Hearing aid battery holder type 312 with Keychain hole

I really liked the simplicity of this model but I need it to be on my keychain or I will for get to take it with me when I go places. Thanks to @Bbrinck_1460947 for the initial design if you just want the box and not the additions for a…

Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant

Downloads
82
Likes
7
Rating
5
P
PrintablesLars Mose

TT01 high batterystrap

Made to fit a 4300 mah 3s lipo battery in a TT01

Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant

Downloads
80
Likes
12
Rating
0

Battery holder for nihola bicycle

This 3D-print will help you mount a battery in the cabin of your Nihola Family cargo bike . Contact me, if you need a kit. See also my programming cable for TSDZ2 . Material needed: 3 x battery-holder.stl. 1 x battery-holder-bottom.stl. 1…

Print approx. €15.22–€18.61 excl. taxPreliminary estimate for one variant

Downloads
76
Likes
9
Rating
0
P
Printablestom

Sammelbox für leere Batterien/ Collection box for empty batteries

Eine einfache Box mit Deckel zum Sammeln von leeren Batterien, die später fachgerecht entsorgt werden. Abmessungen: 100x100x75 mm Translation: DeepL A simple box with a lid for collecting empty batteries, which are later disposed of…

Print approx. €6.73–€8.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
75
Likes
8
Rating
5
P
Printablesnjackson

Non-Jamming Battery Tower (AA and AAA) - Prints Without Supports

I designed this battery tower out of frustration with other battery holders, which would regularly jam when I would remove a couple batteries. This one should always replace the battery you remove, with a new one from behind it. It…

Print approx. €22.24–€27.18 excl. taxPreliminary estimate for one variant

Downloads
72
Likes
10
Rating
0
P
PrintablesAudi

Worx PowerShare Battery Holder

Batteries that are known to fit: US models WA3525, WA3575 and WA3669. I printed several other holders, and even the ones that said they were for US models would not hold my 20V Worx PowerShare batteries. Some were way too tight. Some…

Print approx. €3.28–€4.01 excl. taxPreliminary estimate for one variant

Downloads
72
Likes
11
Rating
0