529 models
This is a bezel with press pad for 0.96" 126x64 I2C OLEDs (about 25,3x26mm) that can be mounted “hole only” (5 holes) on a panel. M2 screws with washers and nuts are used for attachment.
Unfortunately, the otherwise rather nice budget guitar HBO-850 from Harley Benton comes with a simple pickup preamp without tuner. The preamp fitted is really long and slim, so it is difficult to fit other preamps into the same hole. I…
Ford F250 double din 7" stereo bezel printed in PETG
Great way to stylise and change the colour of downlights without replacing the whole light. To fit 48mm ID and 88mm OD, 3mm deep.
Designed as a bezel that fills the additional space around an Ultra Slim ODD sized ICY DOCK ToughArmor MB852M2PO-B in a Supermicro CSE-835 Server's Slim ODD bay. This should fit other Ultra Slim ODD sized devices as well. Notes Optimized…
Update 1: Added a version with a longer front lip that fits better if your monitor has curved or thick bezels and fixed the weird slicing bug that added strange lines on top of the model. Update 2: I now recommend printing the…
AD5X Bezel and Stylus Improve your interaction with the touch screen with this stylus. Bezel adds character to your printer and serves as a holder for the stylus.
Overview A screen bezel and a stylus holder for the FlashForge Adventurer 5m. One M3x6 or M3x5 screw is required to securely fasten the stylus holder to the cover. A bit of super glue might help as well. The bezel is a semi-loose fit for…
Since I lost the original bezel on the first day, I have designed a 3D printable replacement with different bezel styles: - Flat. The bezel is a flat surface with a sharp edge on the outer diameter - Fillet. Has a fillet on the outer…
These are two simple bezels for the Bambu Lab P1P / P1S screen. Choose what you prefer. The bezels are optimzed to be printed with the standard 0.16 “optimal” system setting, no support or brim needed. They will be pressed on the screen…
Recommend printing in ASA for heat and UV protection. Super glued most of the bezel pieces on and filled the gaps between the pieces with super glue as well. I used Sikaflex on the piece that has the cable coming through it. This is both…
If you have a triple screen set up on your Sim Racing rig and want to lose the black strip that occurs where your screens meet then this is the basis of a DIY Bezel-Free Kit. The original ASUS ROG Bezel-Free Kit was an accessory that…
Double Din Bezel Double DIN bezel for your car stereo. This fits a 2003 VW Passat, Golf and Jetta. It will fit numerous other vehicles with a square hole. Single DIN coming soon. Print it face down. PLA Pro .2 Layer height 100% Infill If…
Custom Monitor Support: Designed for Stability and Perfect Alignment I designed this custom support system to overcome the limitations of the original ASUS stand, which is designed for 27-inch monitors. My setup features three 32-inch…
This model adds a bezel and stylus to the screen of the printer. The stylus stops fingerprints smudging the screen. This model has a pause in the stylus print to add optional magnets to hold the stylus in place. There is also a logo on…
Printable front bezel compatible with micro desktop computer models 3060, 5060, 7060. Add some colour to your dull desktop machine. In a corporate environment it is also helpful if you want to identify machines by grouping them in colour,…
Alternative solution for BMW E46 Double Din AC Relocation Bezel. After a Double Din radio replacement you have to move the AC unit on the lower frame but the unit doesn't fit that well. This is a simple solution that uses your original…
Sort of a middle ground between the full bezel cover and the small thin line that goes only around the edge of the glass from astosia's files. It covers a small section of the edge and protrudes 0.5mm over the glass. It's friction fit and…
LHD s13 240sx left and right window switch trim / door handle bezels.
*************** UPDATED B-Model .stl 2-28-2023 The “B” model variation of this file moves the SD card holder slightly right and adds a 2mm pass-through hole that perfectly aligns with the back-edge of the micro SD card slot. This allows…
This is a trim piece to go around the touch screen/display for the Centauri Carbon 2 printer. Perfect to add a bit of color to your printer. Inspired by a similar design for the original CC1. No supports or brim needed Print time ~13min…
My wife hated the shocking white bezel on the Google Nest Hub. I actually agree. Looks like an old Samsung tablet. Who wants that relic displayed prominently in the house? My first thought was black electrical tape, but I figured I'd give…
Modified version of the Screen Faceplate Frame to enable installation and removal easily without removing the control panel, avoiding the risk of damage that others have reported.
I designed this replacement bezel, as I could only find one design and it didn't fit, even after scaling it up. So I designed this one from scratch. It has been designed in OnShape if you would like to make any changes. I've made two…
This panel-mount bezel is designed to fit any standard 16x2 serial or parallel LCD. Designed and used in a custom PC project I built. .Skp file is include for easy modification! Instructions Print in PLA or ABS with a layer height of 0.25…
AD5X Bezel and Stylus (Improved Version) This model includes a custom bezel and a touchscreen stylus designed for the Flashforge AD5X. The bezel enhances the overall appearance of the printer while providing a dedicated and convenient…
Based on the idea from Jason Rose's design to add 3x140mm fans to the front of a 24-bay Supermicro. I've redesigned from the ground up to make it more easily printable and cheaper as they paid $180 for one! For this, I've split it into…
Land Rover Defender door lock bezel. I tried to make the design as similar as possible to the original. Requires supports to be printed. I got some pictures as example. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Simplified design with added details (bevels, fillets, etc.)
After 9 years of using, the Nook Simple Touch Front Bezel crumpled into dust. So I make a replacement for it. You will need to add some foam tape on the button for them to work. Then you could stick front bezel with double sided tape.
Replacement front faceplate/bezel for a laptop style CD/DVD drive After printing, you may need to trim the stem to hit the button properly
You need four M3*6mm (max 8mm!) countersunk screws to assemble Print each two times. PLA is nut suitable because of creep. Print in PETG, ABS, ect…
The original lens bezel is prone to break if tightened a bit to hard. This usually happens if the lens does not snap into place and you don't notice it while tightening. In the original bezel there is a small groove for a rubber o-ring,…
I made this to contain a 1.8"TFT screen ST7735 and attach it to a project box which contained an Arduino. The template allowed me to precisely cut out the holes for the cables and the screws to hold it in place and then seal the main box…
This is a custom bezel designed for thr R7 series Dell rack mount server. This has been cut to fit the length of a small bed such as the Ender 3 The retention system is still untested but shoud work well enough. Possibly a minor bit of…
Simple extension for the ASUS Bezel Free Kit. The extension has two different sides, depending on the orientation you can change the distance to the screen. If this is not enough, you can use the spacer to increase the distance to the…
Shearwater Petrel 2 and 3 bezel cover/protector. Friction fit. I print it in PETG.
Replacement door lock knob bezel for the Volvo S60 and V70 P2. Changelog: 2022-07-31 added oversize version (mine jumped out again) 2022-10-25 added a simple version with 4 hooks 2026-07-12 new smooth HD version with 360° hook
I have a Dell Optiplex 7050 Micro with no faceplate and no power button. So I rebuilt it. Optimized print profiles for Bambu Lab printers available here:…
Since I found out that it was quite easy to build a DIY Bezel Free Kit using the lenticular lens that some old monitors include inside, I've been trying to build one for my simracing rig. There are different supports out there that aren't…
A replacement bezel for the M5Stack Dial - print in any colour to fit in with the rest of your build. I didn't like the orange and grey scheme, so measured up the parts and designed simplified replacements.
It fits to DW-5600 & DW-5700 models. Done PLA & TPU 95A. U need support & ironing for the top layer… :)
The model shown is a replacement for the original tail lamp bezel cap with OEM part number 33506-SWA-A01 for the 2007-2011 Honda CR-V III (see pictures below). …have fun :)
Remake of the G-Shock DW003 Bezel Ring as replacement part (not original)
In Teile zerlegt, um eigene Mods zu erleichtern (STEP Datei). / Spitted into parts to make it easier to create own modifications (STEP File).
I had them uploaded on Shapeway's website because it was the only website for sharing 3D prints back then, and had them for FREE download..it seems they removed this option now and because i get a lot of messages through the years i am…
This is the plastic cover that goes in front of laptop DVD drives, with a button to eject the disk. I highly recommend you use my enclosure for DVD/CD drives in conjunction with this. I have both 9 mm and 12 mm versions of the bezel, and…
A quick to print edge protector for the raised glass edge on the pebble time 2 screen. This version includes a bezel cover, which gives you more surface to stick the bumper onto your watch. Intended as a friction fit around the screen. A…
This is an adapter that makes sure that the bezelfree kit from Asus is secure on thin monitors like my AOC 27 WQHD screen. Without these adapters the kit is really loose. For me the top side only needed the adapter, so I printed 4.…
This is a treble pickup bezel to fit Rickenbacker 4003 basses. It may fit other models like the 4003S but I can’t physically try this to confirm. The Rickenbacker 4003 treble pickup cover may look cool and authentic, but it won’t be long…
The Ford Ranger does not come with this piece of trim around the Ignition
Print time ~15min No supports needed Layer height: 0.2mm
Made to for my rx7 dash. Printed in abs, face down, to get the texture of the PEI bed that almost matches OE Mazda texture. Included STL and F3d files for modification. There is also a groove in the bottom to allow for a strand of 1.75…
I needed a larger bezel for my car as it has two single DIN frames (rather than a double DIN). I made this with a larger bottom edge to hide the gap, it fits snugly around the AX1000, AX3000/AX3200 and AX5000 screen. I curved it to match…
WeAct 2.13" Epaper Module Bezel. Two versions available - one with M3 threads for mounting within something, drywall, etc., and one without. Found on aliexpress https://www.aliexpress.com/item/1005004644515880.html Printed in PLA, 0.12…
Printables upload of JRO's design for front fan bezel for the 846/847 series of chassis from supermicro. This allows 3x 140mm fans to be used on the front of a supermicro 846/847 series chassis. Note that this is a BIG print, 462mm. For…
This is a replacement radio console for your C3 corvette. It is only a blank template for you to modify to fit your own radio and gauges. I have included the SketchUp file I plan to replace my original radio with a standard 1 din radio,…
Replica of Toyota part 69762-14910 - Door Lock Knob Bezel for a MK3 Supra. There are two versions here: NoLockText “LOCK” embossed In partnership with TougeNation , I've added a version with no embossed lock text. This version is designed…
This is a multi-color version of the stock Prusa MK4 bezel. I have not been able to test print this yet but will soon. This is great for all those trying to deck out their Mk4.
A panel mount for Keystone Connection that looks like the Black Box Keystone Panel Mount Bezel
These little OLED displays are super-useful. But mounting them into an enclosure means cutting a really neat rectangular hole, which I find slow & tiresome. This bezel holds the entire module on the outside of the enclosure, and fits with…
Mercedes 215 CL class door switch panel mounting hooks. Often broken or missing, OEM part number A2157208948 currently marked as NLA. Modeled after the original one with some modifications to allow printing upright without supports.
Consol Bezel for the 1st Gen Toyota 4runner (and likely pickups). It is not an exact replica, but it fits well. Deletes the 12v cigarette lighter plug. Step included, please attribute any remixes or sales. (CC-BY). Bambu suggests laying…
Introducing the Bezelneko My first 60% keyboard case design initially inspired by the popular Bakeneko (hence the somewhat similar name) yet quickly developed into this very own design. This model is optimized for 3d printing (no supports…
bezel for 0.96" OLED Displays can be glued in any case with a 29x30 rect hole
Original bezel is hard to print which is located Nextion's website. So i made mine for super easy & fast print.
Tool to remove/align the button bezel on Emisar and Noctigon flashlights, useful to replace a torn or dirty switch cover or repair a faulty switch Version compatibility: 6 spoke: D1v2, D1K, D4K, DW4, DT8K, DM11 (new), M44 (maybe) 5 spoke…
I was using the Bambu Lab P1P Screen Faceplate Frame , which I like for the minimalistic design. While I'm using the Bambu Lab P1P and playing around with the timelapse function after Bambu Lab sent the camera and LED light for free, I…
I picked up a pink PS2 Slim a while ago, which for some reason had the Bezel on top ripped off. This seemed like a nice opportunity/reason to remake that part, it's a simple enough model that made a nice quick practice for me. I have…
The original plastic bezel on my dad's Casio DW-1000 wristwatch had broken off a long time ago, so we wanted something to protect the metal case of the watch while we looked for an actual OEM-fitment, OEM-look replacement. If printed on a…
Remix of front panel that covers the LCD bezels.
replacement part
Printed without brim but you can add brim if you have problems with bed adhesion Printed fine with generic PLA and PLA+ Optional - add four 10 x 1 MM round magnets to the back to mimic the OEM bezel
This is a nice trim bezel for AD5X with holder on the side for a stylus. I placed the stylus holder on the side for easier access. I printed this on my AD5X and added fuzzy skin. I used the stylus from…
A Multicolor LCD Bezel for Prusa MK4 remixed from The Astrononeer 's LCD Bezel. The reset lettering is still a little too small for a 0.4 nozzle, but for me it's better than the original. Printed with Prusament PETG CF & Prusa…
The door defrost vent bezel on mk3 supras is a commonly cracked or broken piece because it is originally ABS and exposed to a lot of sunshine and heat cycling. This is a piece modeled after the original. I haven't been able to find a part…
This is a more minimal version of my first minimal bezel. This does require you to detach the screen of the P2S. You will also need to detach the ribbon cable from the screen. Press the bezel on the back of the screen and then reattach…
Here is a collection of 3.5 inch bezels for the old Macs that use the “outrigger” case (Power Macintosh 7200, 7300, 7500, 7600 and Power Macintosh G3 Desktop). I have found it's easiest to print on either side using supports, and tree…
This is a remix of Andy Barnett's TFT35-E3 bezel from thingiverse: https://www.thingiverse.com/thing:4177691 I flattened the top of the bezel, so its looks nicer. Print instructions Category: 3D Printer Parts Summary I flattened the top…
Simple bezel to help hide those less than straight dremelled cut outs for a 20x4 LCD display
Overview A screen bezel and a protective screen cover for the Qidi Plus 4. In anticipation of Qidibox a multicolored version is available! Let's make it our first multicolored Qidi print! Printing Print face down, no supports required.…
I love my homelab, but I felt that it was just missing something special - Thankfully, I have a 3D printer and enough passible CAD skills to change that! This model is designed to fit MOST 2U Supermicro servers and either friction-fit in…
A bezel for the display
A nice bezel to customize your Kobra Go.
Bezel / Washer for use 1/4" (6.35mm) Jack Sockets. This is present on most guitar amplifiers and other studio audio devices. Print instructions PLA 0.1mm layer height Infill 100% Look to 3MF file for detailed print settings in PrusaSlicer.
Print this with the face laying on the bed. I recommend .15 or thinner layers to get enough material down. This is an application where a LESS stiff material like PETG is probably better than PLA. I have had good luck with all sorts of…
I would recommend printing it in PETG for the temperature resistance, but PLA should be ok too if your car does not see much sunlight, a well-calibrated printer is recommended for better print quality.
This is a set of different tools to help flashlight bezel removal. I recommend to print them with PETG or ABS/ASA with 5 to 8 perimeters and 0,1 mm layer height. This is a growing collection, so feel free to check back later for tools for…
Bezel to support the blog post at https://arduinoplusplus.wordpress.com/2023/11/19/led-matrix-hourglass-timer/ No special print setting required.
My knob bezel cracked so I thought I may as well design and print a new one. I used snug supports which seemed to work the best. I also recommend using ironing on all top layers for a smother finish. There are 2 models, Outlander4WD is…
simple bezel and stylus for AD5M.
Benzel removal tool. Following parts are needed 8 x M4x10mm bolts 1 x M8x80mm bolt 1 x M8 Heat insert 8 x M4 Heat insert
Increased bezel width to hide non-functional parts of the screen. edit 26/03/25: I initially uploaded the wrong STL. It should now be fixed.
Originally made for a golf cart, but could be used for any application
The bezel cutout on the machined aluminum faceplate is slightly oversized and I didn't like how it looked with a stock bezel. So I made my own. I made two files, one sized for DS games (e.g. SLOT-1 games) or one sized for GBA games (e.g.…
Bezel for a 16x2 LCD This design is to mount a common 16x2 LCD onto a front panel. You will need to cut a hole at least 70x20mm. The bezel is designed to cover up the hole so if your handiwork is as rough as mine, you won't see it! I…
The two halves clamshell over an aftermarket LED headlight. It can then be mounted to the stock location using the original hardware. Printed with supports in PLA. Might recommend PETG for durability. The design utilizes M3 and M5…
Bezel remix to cover the touch screen traces, from the original design to clean it up. The mount is fantastic but the original designer did not have a display on hand when modeling.
This is a remix of the Bezel cover and Logo When I printed the logo the original was 0.8mm tall and the extruder tip mangled the smaller text and didn't print the line. This remix reduces the text height/thickness to 0.4mm (2 layers) and…
