206 models
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
Hi Fellow Creators, I wanted to upgrade my old Ender 3 Pro with Dragonfly Hotend BMS. There was no appropriate Fan Duct so I create one, and now I'm sharing it with you. Dragonfly Hotend is low, and take a lot of space, so the fan is thin…
A Satsana variant that works with Dragonfly BMS and a 5015 fan with the ABL mount removed as i couldnt find any without the ABL so i removed the one from this and thought others might need one aswell. I reccomend printing this with the…
Easily add window screens to your louvered air vents to keep bugs out of your garden shed. Use PETG filament for outdoor use. No supports or brims. Print 2 frames. Apply outdoor rated 1" wide double stick tape to back side of frame. After…
This is a simple box to put a communication board of the JK-BMS inverter BMS (model JK-PB2A16S20P) that I use in my DIY solar energy storage system. Letters on the box could be filled by the nail polish or sealant to make letters stand…
Housing for Interfaceboard
I made this model in Fusion 360 based of my JK-PB2A16S15P, thought it could come in handy for someone designing an enclousure or mount. Both BMS and Comms board included. Please go easy on me, I taught myself.
Panel Komunikacyjny - Zaślepka do BMS JK
EN: Unified box for 4.3 inch display and interface board for JK-BMS. It is possible to edit the pack number in Bambu studio (1, 2, 3, etc. or anything else) the file is attached below. Ready for AMS. Happy printing! :-) I added a model of…
Standfuss für das Anschlusspanel des JK Inverter BMS incl. der Starttaste
Simple bracket for the JK Inverter BMS. Is required twice to attach the BMS at each end to a wall or to the battery hou
Housing for Daly BMS board / Gehäuse für Platine Daly BMS
This is a DragonFly BMS mount (from Phaetus hotend) for EVA v.3, include nuts and inserts versions. NOW for the 6 and 7 fins version, from Phaetus DragonFly BMS. UPDATES: · 2023/05/25 The 7 fins version is about 2mm longer, so I made that…
BMW BMS Cabin Filter Cover E Series. Prevent Water from entering your cabin vents when doing cowl delete with these covers, made to fit both sides. Made one in half if your printer can't print the whole thing.
This is a remix of the 18650 battery holder for the (tr)uSDX. It allows for a 3S BMS off Amazon (~$2). This allows for safe cut off when low voltage is hit, and also for safe charging and balancing off a ~12v power supply. I tried to…
A Wall Mount for a JK-BMS. My model is a JK-B2A24S15P but it should work with other ones. Please comment on your model number if it fits a different one. The top and bottom mounts have different heights. Top: mm 15,0 inner. Bottom: 14,1…
Soporte de Montaje con Ventilación para JK-BMS (300A) Este es un soporte robusto y funcional diseñado específicamente para la JK-BMS de 300A (modelo JK-PB2A16S30P ). El diseño eleva la BMS para permitir un flujo de aire constante por la…
Clip-in-place holder for BMS (battery management system) for a 3S 3P (12V) lipo battery pack (3x3 of 18650) This is a clip in place holder for a 10 A BMS for a 3x3 3S3P lipo pack It can be used with one of the million 18650 battery spacer…
Check collections for other files.
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
This is a remix (draft) of the "Makita Mega Battery for 18650 10x extended 15x 20x replica" ( https://www.thingiverse.com/thing:5026796 ) with the following changes: modified version of 1.stl + 2.stl to fit a BMS (BL1830) like…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
Dodaję uchwyty montażowe do bms-a jk-bms. Dodatkowo zapraszam do głównego projektu: https://www.printables.com/model/310442-projekt-magazynu-lg-ncm-e78-uklad-14s11p - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku…
I needed to space out the Phaetus BMS hotend a bit on the Ender 3, so the silicon sock would be able to fit onto heatblock while still clearing the bottom wheel mount on the X gantry carriage. This part slips over the hotend standoff…
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
PLA plastic holder for a 3S 40A BMS board and three 18650 batteries. The design provides secure fixation of all components, easy access to terminals, and tool-free assembly. Ideal for DIY projects such as portable power banks, e-bikes,…
I designed this model for my printer. I tested a lot of versions and deleted all weakness. My final version is ready to go just paint correctly supports. After print, put inserts and then assembly whole thing. You will need: some M3…
Printed in petg, the more perimeters, the stronger it will be. I suggest inserting m3 bolts in the round protrusions as in the photos, otherwise they may break, also you may use a bit of glue to make the whole thing non-separable… I used…
To mount the BT dongle of my Daly BMS, I made a holder that also holds the USB plug in place. It fits tight (depending on printer tolerances of course) - but it should be a one-time thing - so I like it. Maybe scale it up by 1% or so if…
Reworked version of this handle: https://www.printables.com/pl/model/331220-jk-bms-uczenia-podstawka-do-bms-a The holder now allows you to mount the BMS on a flat surface. It sticks out only a few mm from the mounted surface. I also added…
Work In Progress, F-16C Block 50, ICP (UFC for us old school DCS peeps) All buttons fit best @ 97% scale, though some are slightly loose Text on buttons is too small for a 0.04mm print head Added 2 backplates, "Thicker" version worked…
This can all be printed without any supports. It's designed to hold 6 18650 cells in a 12 volt configuration while allowing the use of a BMS and battery removal. I've been charging and discharging mine at ~2 amps without any problems. To…
Hacked off the charger from https://www.thingiverse.com/thing:2892321 and then shoved 3 together and cleaned it up a little, just a little ;) Then added a platform for those trashy $1 bms for 3s, wired it all up w/ some 24ga rj45 wire,…
This model includes 2 pieces, an upper and lower case for a 10s2p battery pack. Dimensions are 150x95x76mm (about 155x100x80 after heat shrink wrap). 8mm wide slots along top and bottom for 8mm nickel / copper strips. The design loops…
7 Zoll Display nur mit V19 BMS Kompatibel https://de.aliexpress.com/item/1005010356180048.html?spm=a2g0o.order_list.order_list_main.5.68fc18020ZNl94&gatewayAdapt=glo2deu
This is a display holder for the 3.2" LCD used for the JK Inverter BMS(also other JK BMS's) for the Lifepo4 cases. It fits the screen location used in most battery boxes. i used it to fit the JK inverter BMs and added the screen 3.2 LCD…
Do pobrania kompletny projekt "naprawczy" dla szyn z PCB dla obudowy DIY Box. Boxy DIY pod LFP 280Ah są różne i wersji tych szyn PCB jest kilka, ale jak macie szyny takie jak w mojej obudowie, to będą pasowały Dodatkowo jest rzut z…
Edit: added zero-g diffuser for the cowl with the logo. based on the voron diffuser, all measurements match. printed and tested, let me know if there's any issues and I'll fix asap.…
Remix of satsana to fit dragonfly bms hotend with 5015 cooling fan Fitted for ender 3 pro only as thats what i have….will fit any printer that uses the same x carriage as ender 3 pro probe offsets are: x-53 y-15
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
meshtastic heltec v2 battery case with two 18650 , back parte compatile with a famous heltec v3 case look like in photos
Plastic holder for BMS 4S 40A board and four 18650 batteries
JK BMS 3.2 LCD Display cover V.2 PETG Support needed! Need 2 M3 bolts 15mm long with nuts Залиштіть лайк та комент, буду дуже вдячний) Category: DIY
Icarus 2 has been released which is the current version and it has a number of improvements: View Icarus 2 here Support All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this…
Power bank for 4 batteries. You will need: 4x 18650 batteries - https://aliexpress.ru/wholesale?SearchText=18650 BMS module 2s or 4s - https://aliexpress.ru/wholesale?SearchText=bms+board Battery charging module Type-C -…
A printing head for Ender 3/Ender 3 V2 with very good cooling performance. Printing accessories: Dragonfly BMS hotend Orbiter V2 Extruder 5015 24V X2 (part cooling) 4010 12V (hotend) Hardware: M4x20 @4 (5015 fan mounting) M4x10@2 (blower…
Fixed holes, addes labels for original.
JK-BMS LCD 4.3 cover for LiFePo4 box "BLC" JK-BMS LCD 4.3 кришка кля корпусів LiFePo4 box "BLC"
JK BMS LCD 4.3 Zoll 2 Tropfen Sekundenkleber sollten den Deckel halten Ohne Support zu Drucken Extra keine Öffnung für das Anschlusskabel Mit Stufenbohrer individuell zu setzen
Jelikož už mi nebavilo pravidelné hraní si s teflonovu trubičkou v origo hotendu, Mosquito clon a následně E3D V6 hotend kolikrát zase přinesly jiný problémy… tak jsem si k dalšímu pokusu vybral Phaetus Dragon BMS Hotend.…
!!! PLEASE NOTE - THIS MOD IS ONLY FOR THE 7-FIN, HEAT INSERT MODEL !!! Great mod by @themacboy - appreciated and thx for sharing, and ofc not possible without the whole EVA thing going on before that. After the initial install (of std…
This mount requires 2 heatset inserts. A huge bonus with using the Dragonfly BMS is you can use 2 M3 SHCS instead of the tiny M2 or M2.5 required by the Dragonfly BMO. I find the BMS side mount with 2 screws is superior to the BMO top…
This is, in my opinion, the best and cheapest way to modernize your GX680. Battery life has been great with two 18650 cells and the build is relatively simple. All the parts are available on Aliexpress. This is a remix of futtigue's…
designed for heatset inserts, nozzle should be pretty much in stock location.' Update: If you have issues with prints after using this bracket for a while, check the tightness on the screws used to mount the hotend to this bracket, and…
Open-top base/holder for 3S 20A 18650 BMS charger PCB. Features dedicated slots for cells, protective walls, and precise spaces for all connections—no lid for easy access and cooling.
I designed this mount to fit on top of our battery bank, to mount the JK BMS battery balancer. But could be used to mounting to many surfaces. very secure to the balancer with the normal mounting screws, but gives a better mounting…
Kit to install a JK BMS RESS (JK-PB2A16S20P) into a server rack battery / lifepo4 case originally delivered with a Pace 200A BMS (other models like 150A might also be compatible). Print mounting point adapter with supports. I used organic…
!!!Warning!!!This model is still in progress!!! A shroud witch works very welll with hotend Phaetus Dragonfly BMS, 5015 fan on Ender 3 V2 Neo with have magnetic mount round and cubic. Print Settings Printer brand: Creality Printer:…
I got a partially kit of a Prusa mini From a friend but some parts were missing. First and foremost the hotend. So I came up with a quick design to mount one of the hotends I had laying around to my machine. In addition to the "original"…
Панелька до ДжиКей БМС, інколи роблю металеві корпуси, і коли треба невелика кількість, щоб здешевити, та не віддавати на лазер то друкую кришки.
Рама для JK BMS JK-B2A8S20P, используйте винты M3*5 мм (8 шт.)
BMS leiste um Kabel zu verlegen, bzw. um es ordentlich zu verlegen. Für 16 280A Zellen benötigt man vier Stück. PETG / PLA 0,4 Düse
EDIT jan 17 23 - when finally putting on Orbiter 2, there were some problems. I fixed the issues, reprinted, and all seems well now. Orbiter 2 sits in the proper location, mounting holes are fixed, as well as the wire management chimney…
Due to the short cables of the BMS cables, it had to hang from the battery terminal. I didn't like that so I made this. Given the screw holes on the back, it made sense to use them. Installation is simple. 4 countersunk M3 screws in each…
This is a remix of the "FANG-oz-40mm-MicroSwiss" fan duct from thing:2763931 by ozfunghi to work with a Phaetus Dragonfly BMS hotend. If your hotend is from Trianglelab instead of Phaetus, that should be exactly the same. I've added some…
Remix of this remix of the MiniMe 5015 fan duct, modified to accept a slightly thicker blower fan because I bought this one from DigiKey which is actually about 15.8 mm thick. Also added a brace between the mounting holes to keep the duct…
Modified for better airflow and more rigid.
!!Warning: This has not been tested with the stock hotend, it is made for the Phaetus Dragonfly bms. The DD setup might be a little heavy if you don't have a sturdy x axis or a dual z rod. For assembly you will need 7x7mm M3 screws. I…
you can use a normal mk8 hotend and the dragonfly bms hotend you can also print the fan cover so it would look better.
A tool to align the cell for spot welding and a clip tool to align the bms.
For download JK-BMS Wall Mount LCD 4.3 Inch, and 7 Inch. Materials from the assembly: Ekrany Alibaba: https://offer.alibaba.com/cps/eim4k13k?bm=cps&src=saf&productId=1601622207168 Ekran 7 Cali: https://s.click.aliexpress.com/e/_c45PYspF…
This 3S battery + bms holder was designed as additonal power supply for my 12V based Near IR flash light presented in other section.
This is a holder for the 3.2" JK BMS screen that one is able to cut in to the battery enclosure wall or any other wall you can drive screws to
Remix of Gulsifer 3010 Rookery Shroud with shorter air ducts
i made this part to mount a JK inverter BMS to a 6,85KWh MEB LiIon battery module (12s in my case) the printed part also covers the battery terminals to protect them. i made a cutout, so a 10mm socket can reach the screws for the battery…
Für das 150 A Daly BMS habe ich eine Halterung gemacht. Ebenso für das Display. Und eine Abdeckung für die beiden Kontakte des BMS, da diese doch sehr exponiert sind. Für den Bluetooth Adapter habe ich eine kleine Halterung gemacht, damit…
JIKONG BMS 3.2" screen holder for precise placement of holes, you can first print the mask and then the holder itself
I add to the download, if someone needs my project of bms-a Ant 7-16s 320A modification, all files are in. The package contains all the elements from the bms and LCD modifications, there are also heat sink files if someone has the option…
A mount which allows the Orbiter 1.5 and BLTouch to be mounted to the creality Ender 5 stock carriage (and other creality machines with the same carriage plate), aligned for the Phaetus Dragonfly BMS (the best all-metal hotend upgrade…
JK BMS v19 rs485 board mount plate compatible with Communication Interface Board P-Link-CR-V2.0 for Smart JKBMS
[Updated] Added new models under Somplified folder for fast printing and less plastic. The shell stays unchanged. Check photos with black plastic to see the result. ----------------------------------- Simple case to assemble external UPS…
I remixed the great Satsana 5015 Ender 3 V2 for Phaetus BMS Hotend or similiar part to work on an original Ender 3/Pro and added an EZABL mount. Print it with the side that mounts to the carriage down on the bed and use supports only…
I have used my orbiter extruder on another printer and had the LGX lite on hand. Step model coming soon. This is my first revision of the part and everything seems to fit so will most likely not make another version
Negative_terminal_M8 for JK BMS
frame for installation 3.2 inch display for jk bms instead of 4.3 inch
Adapter for New LCD 7.0 inch V19 for DIY 48V LiFePO4 Battery Case with JK 16S 200A Smart BMS 51.2V DIY Kits BT LCD 2A Active Balancer Case Assemble Box which has 4.3 inch hole from aliexpress.
I remixed Satsanas Ender 3 fanduct with an 5015 blower fan to fit the Ender 3 V2 X-Axis gantry and my Phaetus BMS Hotend because it is wider (24mm) than the standard Ender 3 V2 hotend. Now the space between the walls where the hotend sits…
This is a toolhead for the miniafterburner to fit a dragonfly hotend. it doesnt axactly match the heigt. it has intergrated break away support. and needs 2 heatsets. and 2x 10mm m3 screws. the foto has a zodiac BMS but it also fits the…
This is one of my earlier designs that I never got to posting. I designed a frame to serve as the mounting point for the B-series 3-8S 200A version of the JK BMS, as well as a generic 350-500A shunt which is commonly included with battery…
This adapter makes hotend lower so it became compatible with default part cooling. Also hotend fan now blows air directly to radiator and not to heatblock. Hardware needed Stock CR-200B hotend screws to attach adapter to toolhead Stock…
Just print and snap the TP4056 type c 18650 Li-ion BMS module on the print. It also have 2 holes to see the charging LEDs.
![JK BMS Mounting Frame [3-8S 200A]](https://media.printables.com/media/prints/1491590/images/11239924_422f3648-7b67-44d8-a8f9-4bf8d9e3e40d_7adf477d-b69e-4eb2-849a-a6b8202eb385/large_display_img_20240226_160921_1491590.jpg)
