677 models
HexDish SignalBoost: Amplify Your Cell Signal Outdoors The SignalBoost HexDish is a modular parabolic reflector designed to enhance cell signal reception in remote areas like forests, campgrounds, or anywhere with limited coverage.…
I designed this based on the logo for the Society of Women in Space Exploration to support their mission. For best results, print in hot pink filament! https://twitter.com/SWISEofficial
This simple cover allows to protect your SZ-BT07CCCV module electronics from accidental mechanical damage. It snaps on without the use of screws, stays snug, but allows you to take it off easily to access the voltage/current screws on the…
Designed to fit a voltage converter model number: 4KX 18V Makita Battery Adapter: See my design here https://www.printables.com/model/436132/ 18V Bosch Professional Battery Adapter: See my design here…
It's a remix from https://www.thingiverse.com/thing:3370199 This is a simple snap case print to keep you from burning your fingers on the hot choke coil of the MT3608 voltage boost module. - No additional screws required! - Please note…
Uses 4x M3x16 screws with 4x M3 nuts
Remixed to add holes so that buttons can be pressed intentionally, but are still protected from accidental activation. Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 80+ Supports: No Print…
The built in bowl for the Aqara pet feeder is way too small for my larger dog, created this to keep the feeder above the larger bowl. This can be used with the pet bowl holder here >…
I needed to support my speedbooster Viltrox EF-M2 working together with BMPCC4k (Black Magic Pocket Cinema Camera 4k) in Tilta cage and Sigma 18-35 lens. Unfortunately Smallrig Lens Adapter Support for BMPCC 4K Cage 2769 is not available…
02/09/2025 (UPDATE): Added “Flat” design. The STL includes the individual bodies for the logo and graphics. After opening with your slicer of choice, split the model into “Parts”. This can be used for multi-extruder or MMU equipped…
Do you need a portable & rechargeable 5-12V solution to power your projects? Simply add a 28-29mm (1-1/8") hole into your application & insert this power carrier design. The self-retention clips will secure it in place against a panel.…
Modelle für den BlackRoll Booster um diesen als Massagestab zu nutzen. Inspiriert vom Original BlackRoll Booster Head habe ich ein Version erstellt, die für den 3D Druck optimiert ist. Unten findet Ihr die Daten für einen Adapter, einen…
TL;DR For caffeine junkies who crave uninterrupted coffee moments, the B³ Bean Bin Booster offers extended bean storage to keep the java flowing. update 2023.1002 added the FreeCAD source file Collection Motivation The motivation behind…
adafruits voltage regulator/filter PCB enclosure with 4 pin Connector fitted Header, Vertical, 4 Way - Jst (japan Solderless Terminals) | CPC Connector Housing, 4 Way - Jst (japan Solderless Terminals) | CPC Crimp Terminal, XH, 28-22AWG -…
Tisknuto z PLA. PM Měděná profil Průša sliceru 0,20mm SPEED, 3 perimetry, horní i spodní vrstvy nastaveny na 5 vrstev, výplň gyroid 15%. Sílu extruze jsem pro “výplň” nastavil na 0,5 viz obrázek Díly “vypln” jsem tiskl s jedním perimetrem…
These are fun rockets with boosters that extend on take-off. I designed two sizes and each contain two parts: the main rocket body and the ‘boosters’. I've included the following STL models: Large Rocket (complete) Large Rocket (body…
Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…
This is a booster pack for the Space Shuttle Edeavour . It consists of the Orange external tank and two Solid Rocket Boosters. The pack is attached to the Orbiter using the holes for a stand. In the suffix of the files, there are color…
A Custom-Designed Dispenser to fit Pokémon Booster Packs up to x43 packs for the single dispenser & x86 for the double dispenser lid is optional depending on your needs. The Dispenser prevents damage to booter packs, warping & UV…
Enhanced Accessory for the Hong-Thai brand Compound Herb Inhaler. This add-on is meticulously designed to provide users with an innovative and alternative method of inhalation, enhancing the overall experience. There are 2 versions of…
Enjoy cube drafting? Or maybe Jumpstart? Print some of these! Very low filament utilization (~20 g per inner/outer pair), fits 15+ double sleeved cards, or 21+ single sleeved cards easily. I printed with a 0.6 nozzle in PLA. If you're…
You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…
Mounting solution for the Boost Kit 180 (8nm) power brick for the Fanatec CSL DD & DD PRO to Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts The Series 15 that I modeled the mounting to is from tnutz.com and…
This dispenser is big enough to hold 15 card draft packs and 12 card set backs. Set packs fit a little bit more loosely. Printed on the Bambu X1C with .4 mm nozzle with .2 mm layer height on standard speed with supports for the bottom…
You can use the original screw that come with it and it will work very fine, but if you want, you can put an insert too. You can use your cam in the original spot without any problems too. The air flow inside is distributed perfectly and…
This is from a size 11.5 (not to scale) Adidas Ultra Boost 3.0 in Trace Khaki. Should be moderately easy to 3D print given you use some support for the lace aglets. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
(if you have printed this earlier, as of 12/27/22 there is an entire new version out!) Mini-IFU (v2) Print There are 2 versions of the “Connector_Bottom” you can print (you only need one!). _v2 requires the additional…
This is a 1:144 scale model of SpaceX's Super Heavy Booster, the first stage of the Starship rocket! It measures at 62.5mm in diameter and the booster + Hot Stage Ring is ~ 490mm tall! This is “Block 2” of the booster! Ship can be found…
Intro: my kid is a lot into space shuttles and have an original Duplo space shuttle ( https://www.lego.com/en-gb/product/space-shuttle-mission-10944 ) so I created for him attacheable orange external tank with booster rockets (real…
In my research about exhaust and cooling fans these things work by normalizing turbulence created by the fan. When on the exhaust side air presses against the walls of the cone and eliminates the air from swirling back around the blades…
Print in any setting, insert converter and tighten it down with 4x M3 screws.
There are so many options, but I wanted to combine some different options out there. I have remixed the base box holding the fan from Desktop Bladeless Fan by Helix3D , thanks. I have remixed the Fan Inner and Outer parts from bladeless…
Drawn to house a boost gauge in my car. gauge is slightly angled towards driver for ease of viewing. Model is for a RHD Audi S3 8L (year 1999-2003) I'm sure if you have a LHD model you can just mirror this but haven't tried it myself. Not…
Da mir der Sound von den SMAS Lautsprechern viel zu leise war habe ich mir diese Trichter konstruiert und gedruckt um mehr Lautstärke zu bekommen. Mit dem Audio Booster ist es ca. doppelt so laut Mit Ohrpolster ist das mindestens 3x so…
Phone Speaker Amplifier Stand, Powerful Audio Boost. It really makes a difference! Important: Print it standing straight, just barely touching the print bed, not resting on its legs, so the support can reach inside. See attached photos.…
Designed for use with Selle Italia SLR Boost TM Superflow (Small) specifically. The design utilises a slip in joint for the original Trek/Bontrager RT mount that comes with the light. There is also a provision to use an M5 Bolt for…
(English below) Um die Starlink mini im Wohnmobil über 12V betreiben zu können, habe ich mir ein kleines 12V Netzteil für den KFZ Zigarettenanzünder gebaut. Damit lässt sich das original 15m Starlink Kabel weiterhin verwenden und es kommt…
This a 1/87 scale model of the first landed orbital booster from SpaceX which landed on 21. december 2015. I was amazed by Twuelfing's model and how good it looked in his display so I decided to build it, too. I have many small cars in…
A mod for Apple Magic Trackpad 2 (A1535) to make it level with HHKB keyboard.
It has been designed for a 15mm axle and 110mm space. Designed for 21mm drop outs, so it should be compatible with all the BOOST forks. UPDATE : The V5 version is 5mm taller as requested on a comment from Thingiverse. IMPORTANT: in this…
Range extender for DJI Mavic drones. Designed for the Mavic Mini controller but I believe most DJI drones have the same antenna design so it should work on most. I used reflective foil tape as a backing. The antenna grip must be printed…
This is a protective case to suit the commonly available “1200W" 20A DC Boost (step-up) Power Supply Modules (8-60V input, 12-83V output - example ). It should also fit the “1800W” variant, but this is unconfirmed. This is being used to…
If you have an air filter in your Creality K1, you may have noticed that the rear fan doesn't have much static pressure to push the air through the filter. A simple solution to this problem would be to replace the original fan with a…
Designed for Sleeved Standard American Cards like Magic: the Gathering or Pokémon/Flesh and Blood. Holds 15 double-sleeved cards. Similar to Cardamajigs Cubeamajigs, this one is 3D printable in different sizes. Standard one has a double…
A simple remix to go three-wide. Split into top and bottom parts (for two-color printing), and also in a single model. Enjoy.
Low poly version of my Adidas Ultraboost scan/model. Prints easily with some simple supports under the sole. Compared to the full-res version, this features simpler overhangs and the reduction of a lot of small details that were tricky to…
Suitable for 52mm boost guage. Right-hand drive
Phone stand with volume booster
Printed face down. 3 walls 0.3 layer. with supports. Mounted with clips at the back. but can also be used without the clips. snug fit both on gauge side and airvent.
Needed a small home for my XL6009E1 Step-up converter (DC-DC boost) PCB boards. Two parts (case + lid) to print. No support is needed. PCB and lid snap onto the case, no additional tools required. Here is a link to the XL6009E1 boards I…
I recently was delivered my 1 watt boosters but couldn't find a good simple case for them, I run my antenna wire outside and keep my radio inside so I just needed something to securely mount the board, keep the antenna from spinning and…
There are many radiator boosters. This one is for radiators with 140 mm inner width and 120 mm fans. You can use up to 4 radiators. The booster consists of two components: controller holder (need 1 print) fan holder (need 1 to 4 prints)…
BASIC MODEL: ZK-4KX Buck Boost Converter
An insert/organizer for Deep Sea Adventure: Boost from Oink Games. I remove the alternate language manuals for minimal lid lift. Since I've had experiences with slight variations in Oink Games sizes leading to inserts not working,…
As a part of my ongoing obsession with building custom Hot Wheels tracks mounted to the wall, I designed this motor driven booster. The parts required to replicate as shown are: 2x type 130 mini DC motor (similar to these ) 1x DC motor…
This is a lens cover for the Insta360 ONE RS 4K Boost Lens. I've designed it in Fusion 360 with a 0.15mm layer height and 0.4mm nozzle size in mind when picking dimensions. It fits perfectly after I printed it with my Prusa Mini using…
Disclaimer This design requires soldering skills as well as basic knowledge of electrical wiring and handling of LiPo batteries. If you want to build this, please make sure you know what you are doing . Please figure out wiring for…
Edit 16.3.2024: I originally uploaded the wrong file. Now it is the correct one that fits the newer engines with different size nubs on the fill port This is a simple oil funnel that twist locks onto the fill port. It was made to fit most…
I figured this would make a nice display piece and be fun to paint. Instructions: Print it on its side at about a 45 degree angle with supports to reduce the stepping effect.
I bought an USB variable voltage regulator from Aliexpress (source: https://www.aliexpress.com/item/33008113832.html ) and designed a case for it using Autodesk Fusion 360 Print instructions Category: Electronics Print Settings Printer…
This 3D printing design is a small, minimalistic and cute representation of the huge, complex and brutal (but still cute) SpaceX's Starship System . Starsip The design consists of two parts, which should be printed separately :…
Inspired by the antenna booster from leenanj , I created my own one and added a feature that all Mavic users really love: Having it foldable :-) So I designed the Booster from scratch and ended up in having two parts, that will be screwed…
There are already a couple designs on Thingiverse, in fact this version is based off of Bompe's ( https://www.thingiverse.com/thing:4147266 ) but redrawn from scratch. I wanted a fully printable version without the need for any other…
I have designed flaps for Xreal Air Glasses to boost audio of glasses, since these glasses have really low audio volume. There are two models. Nreal_SPK_TPU: for printing with TPU/TPE filament (its slide in design, care must be taken on…
My son wanted to go faster and further with his hot wheels. The official booster is expensive and doesn't run that fast, plus it is battery powered with DD's. This one runs on 12v DC. You can use a psu or what ever to get that 12v. It…
This tool is designed to assist in installing the Teflon seal on a fuel injector for a Ford EcoBoost engine. Before using this tool, depending on your printer, you may need to sand the guide part smooth. Simple instructions for this model…
Simple enclosure for ZK-4KX or XK-4KX buck/boost DC-DC converter. A lot of big vent holes from all sides for better cooling. Wires can be mounted and dismounted without removing the device out of the case. An additional external fan is…
I designed this booster for the Apple Magic Trackpad to make it level with my wrist rest and keyboard. Hopefully it can work for you as well. This design adds a 17mm boost to the height of the trackpad. Should you add feet to the bottom,…
BASIC MODEL: XY-SK120X BOOST BUCK MODULE (0.5-36V 0-6.0A 120W) Just a basic model of the XY-SK120X BUCK/BOOST Module
Case for XL6019 boost and buck converter (input 5-32v, output 1.3-35v 1.5a max). Features: Vents for cooling Strain relief using Zip-tie which also double as the mechanism to hold the board in place Standard version is high enough to add…
dB BOOST Mobile Phone Sound Booster and Desk Stand Designed for the iphone 13 pro, the slot size is 80mm x 15mm, so any phone within those dimensions and with the speakers at the base of the phone, should work ok. It does increase the…
I have a Trek Roscoe 7 that would not fit on the Zwift Hub smart trainer due to it having a Boost 141 QR rear. This adapter allows the Zwift Hub to properly connect to a Boost 141 QR bike. I printed the adapter out of Carbon Fiber Nylon…
This is the Booster, a double plunger pull-to-prime Nerf pistol with swappable barrels. It uses two Caliburn plunger tubes, and either two 6" or two 5.5" segments of K25. It has separate triggers for each plunger tube, and with the…
Hi This is a case for XL6009 Boost Buck (step up/satep down) Converter like the attached picture. The converters dimensions 25mm x 48mm You can use zip ties to hold the in and out wires. Print Settings Printer Brand: Creality Printer:…
These plugs are designed to go inside a seasucker HUSKE mount and let you put your thru-axle bike on it. Highly recommend printing this as 100% infill as you want the part to be SOLID. Also recommend a brim and upside down. I designed it…
- Replacement for the broken propulsion holder from the mothership of the Starfares of Catan Boardgame (old version). - This is the original STL-File that comes from Kosmos. They provided in the expansion pack for 5-6 Player two of the…
Der Heizkörperlüfter ist für 120mm Standardlüfter konzipiert. Im Download gibt es für Typ22 und Typ33 Heizkörper die Aufnahmeplatten zum Bau eines Heizkörperboosters / Lüfters. Ich heize mit Wärmepumpe und konnte so meine Heizkurve stark…
English Version This is an essential tool when mounting or replacing tubeless tires on a bicycle wheel. It converts an ordinary PET bottle into a pressurized air reservoir for seating tubeless tires. What you need: - Printed adapter (this…
This is designed to work with the ZK-4KX , but will likely work with many similar products like the ZK-SMC01 Stepper Driver with a few mods. ZK-4KX Buck Boost Converter Panel/Lid 2x2x5 Gridfinity Container with ventilation Hexagons are…
I didn't want to wait for $35 tool So I made a better one #T10006A VAG number
Mount your converter with screws. Hole sized for 23 mm screws. Use supports under the clip parts. When unscrewed should flex enough even with PLA to get the board in and after screwing in should hold it tight. STEP file included.
New added some new rev files that should allow for stacking of support electronics using standoffs between layers, and slimmer rak 3401 mount and a clip to hold the antenna on tight. 4/26/26 Mounting brackets for electrical enclosures…
Needs to be printed with flexible material. V2 goes over thumb screw so the cap doesn't get lost while camera is in use…
made a holder for noco booster used 40% infill pla+ you will need to use supports for the cable holder
This is a heating booster for Vogel & Noot Type 21 two-layer compact radiators in widths 132cm and 62cm at 80mm depth. The system works with standard 8cm PC fans (3 pin) which connect the printed segments together. In addition, the…
A basic model of the ZK-SK90 Buck/Boost DC power supply module
A new version of my previous boost gauge. This one is more deep and provide a little cap to avoid sun reflection.
I like how the original design expose heat-sinks for better cooling, while remain pretty sleek. I remixed this design to: Make it a bit longer (a few mm) since the original didn't fit my 300w XL4016 buck converter board. I think the…
The images are self explanatory, there's an extra STL for block modifier if you want to disable fuzzy skin inside. You'll need a DC Jack and a round rocker switch. I did this for the SK90c module but probably the it'll work SK90 SK40.…
3D model of the SuperHeavy B10 engine section with updated skirt and Raptors for the B10 papermodel from AXM Paper Models website. Contents: one engine skirt, one interior wall and floor, 33 Raptor nozzles and 13 Raptor covers. How to…
So the A/C in my room has been underperforming for a while. The register is the furthest it can possibly be from the furnace/blower, and it's the last one in the duct system. I wasn't about to spend $30-$100 on a register booster when I…
I suggest you print in PETG with 0.2mm layers. Print-in-place model. No supports needed. Fasten strain relief for cable with M3 screws directly into the printed holes. 2023-12-03 Version with cable strain relief on both sides added. For…
This design allows the fitment of a 52mm gauge in place of the drivers right hand side vent. The original fins are removed, and this model is fitted in their place. I recommend you print with a material than can withstand medium…
I recently got a NOCO Boost Plus GB40 and while the device itself is great, the included storage and transportation bag is small and fiddly. While thinking about a proper way to store the power bank within my car, I stumbled over a nice…
Boosters to put on your hotwheels monster jam Bone Shaker. It is for the 1:28th scale version (5 1/2 inches or 140mm)
This 3D printable mounting bracket provides a convenient way to mount a J5019 charge/boost module. Their are retaining tabs on both ends to hold the board onto the bracket, as well as several other stops around its perimeter to keep the…
Yet another lab power supply enclosure, made from a single print without need for supports. USB C power input is attached with a drop of hot glue to the printed podestal so that my laptop power supply can be used to power this lab voltage…
Simple 5mm spacer for 100 to 110 front hub. For MTB intended purposes. IMPORTANT: Intended just to be a quick fix untill you buy the right part, in testing using PLA the plastic tends to get compressed ruinning the alingment You can…
![[BASIC MODEL] - ZK-SK90 90W DC BUCK BOOST Power Supply Module](https://media.printables.com/media/prints/859667/images/6606481_7e7de53a-5056-417c-8227-6abd123c1fb5_1a1981d4-a134-42d5-bd7e-e96ab37f439b/sk90-module-back.jpg)
