Search results: bosch

Sort order

3,415 models

P
Printablessternli27

Bosch Professional 18V Battery Adaptor Adapter Module

This battery adapter is used in multiple of my other designs. For Makita 18V Batteries, see my design here: https://www.printables.com/model/436132/ For Milwaukee M18 Batteries, see my design here:…

Downloads
1,988
Likes
239
Rating
4.6
P
PrintablesChri81

Bosch GTS 10 XC Vertical Featherboard

Vertical Featherboard for the fence of the Bosch GTS10XC. You'll need per set 1x Featherboard 1x Top Bracket 2x Slot Nut 4x Knob (Update 19.12.2022: Knobs designed a bit smaller to ensure better handling) 4xM6 Hex bolts 2x M6x20 for the…

Downloads
960
Likes
170
Rating
5
P
Printablesschuetzi99

trimmer blade using zip tie for Bosch, Güde, Einhell, Lidl

This is an adapter to use cheap zip ties as trimmer blade. It was made for a "Güde Rasentrimmer 250/18 RT Set", but this kind of blades is also used from other trimmer brands like Bosch. If this thing works for you, pleas leave a commend…

Downloads
788
Likes
104
Rating
4.33
P
PrintablesL0ran

Bosch Mum5 rotator - Bosch pt. nr. 00630760

I printed it with 50% infill, brim and supports addded to: The bottom face of the wings (not the inclined ones) The base circle The center square which is a bit above the ground the small gaps on the driver pins sticking out downside The…

Downloads
495
Likes
44
Rating
3
P
PrintablesPeopleware

Bosch Cookit Ein-Hand-Griff / One-Hand Handle

ACHTUNG: Neue Revision verfügbar, hier bei Printables. Leichter druckbar, stabiler ATTENTION: new revision available, here at Printables . Easier to print, more stable for english see below Besitzer des Bosch Cookit Topfes kennen es: Man…

Downloads
488
Likes
29
Rating
5
P
Printablesgodofgta

Bithalter Bosch Professional

Bithalter für die Akkuschrauber der Professional Serie für 4 Bits. Entworfen habe ich den Halter für meinen 18V-Schrauber des Typs “GSR 18-2-Li”. Sollte aber auch für andere Modelle und Marken passen wenn sie eine Aufnahme für…

Downloads
488
Likes
84
Rating
5
P
PrintablesLittle_Leo

Featherboard Bosch GTS 635-216

Rechen für den seitlichen Anschlag der Bosch GTS 635-216. Es können hierbei Werkstücke bis zu einer Höhe von 50 mm verarbeitet werden. Der Anschlag kann zusammen mit dem Featherboard und der Halterung im zusammengebauten Zustand unter der…

Downloads
462
Likes
87
Rating
5
P
PrintablesSebastian88pla

Anschlag Block Kappsäge Alu Profil 45x45 4545 Säge Bosch

Hochklappbarer Anschlag um Serienmäßig gleiche längen zu sägen. Querschraube M5 x 80 Loch für Knauf 8mm, Ideal für M8 Gedruckt aus PLA.

Downloads
319
Likes
50
Rating
0
P
PrintablesMichaX

Bosch PBD40 Bohrtisch T-Nut Mutter M6

T-Nut drucken mit PETG infill 100% ohne Stützen Düse: 0,4mm Schichthöhe: 0,2mm Die Fläche mit dem Sechskant auf das Druckbett. Zwischen Sechskant und dem Loch ist eine Drucklage um das Loch drucken zu können. Nach dem Druck einfach mit…

Downloads
288
Likes
39
Rating
5
P
PrintablesHeikit

Hook Haken 30x30 and 40x40 Bosch Aluminium Profile

It would be nice if you post your make. Thank you

Downloads
275
Likes
34
Rating
0
P
PrintablesUkkidoki

Absaugadapter Bosch GTS 10 XC auf 50mm

Einfacher Absaugadapter um die GTS an eine 50mm Absaugung anzuschliessen. Gedruckt in PETG.

Downloads
225
Likes
20
Rating
0
P
PrintablesBurfot

Bosch GTS635-216 Zero Clearance Insert

Zero clearance insert for the Bosch GTS635-216. I had to print in two pieces and glue them, but I've included an "un-split" stl also. I added sections of 100% infill around the corners, the joint, and where the blade will cut through. I…

Downloads
224
Likes
24
Rating
0
P
PrintablesPeopleware

Bosch Cookit Ein-Hand-Griff Revision 2 / One-Hand Handle (DPGM 20 2025 001 171 5)

Revision 2 Viele nutzen bereits die Vorgängerversion . Ich selbst nutze Sie seit 2 Jahren kontinuierlich. In meiner aus ASA gedruckten Version konnte ich nun auf der Innenseite feinste Risse erkennen, die Stabilität scheint noch nicht…

Downloads
218
Likes
18
Rating
5
P
Printablespr3mium.cola

Bosch GTS 10 XC // Adapterblock für Federkamm an Parallelanschlag

hi zusammen :), ich habe einen Adapter/Aufnahme für einen wie ich finde sehr coolen vorhanden Federkamm entwickelt um diesen unverändert an dem Parallelanschlag (horizontale Anwendung) der GTS 10 XC verwenden zu können. Anwendungsidee:…

Downloads
216
Likes
25
Rating
0
P
Printablessternli27

DIY Makita Bosch 18V Battery Adapter Buck Boost Voltage Converter

Designed to fit a voltage converter model number: 4KX 18V Makita Battery Adapter: See my design here https://www.printables.com/model/436132/ 18V Bosch Professional Battery Adapter: See my design here…

Downloads
206
Likes
57
Rating
0
P
PrintablesMetikumi

Kärcher WD 5 Vac to Bosch PSM18 Multi-Sander Adapter

This is an adapter to connect the Kärcher Vacuum Cleaner to a Bosch multi-sander. It has an intentional tight fit on both ends. Add grease before attaching the adapter. The nozzle on the Bosch multi-sander has a diameter of 29-30.5mm and…

Downloads
195
Likes
34
Rating
4.67
P
PrintablesNeliuk

Siematic/Bosch 5382

Panel holders, part number 5382 for SieMatic and Bosch kitchens. They are not produced anymore, so I had to design it myself to replace a broken one. Be careful while tightening the screws as it may easily break if printed in PLA. (I…

Downloads
193
Likes
3
Rating
0
P
PrintablesMike81622

Bosch Cookit Cutting Disk Organizer

Made this for my wife's new favorite kitchen toy and since the space in our drawers is somewhat limited and all the existing designs I found are all too big, I came up with this design to organize the cutting discs a bit more space…

Downloads
178
Likes
28
Rating
5
P
Printablespatrickzell

Bosch Kiox 300 Adapter for Garmin Navigation

Bosch Kiox 300 Halteradapter auf Garmin Edge u.a. Mit dem Adapter ist es möglich, sein Garmin Navi (z.B. Edge 830 u.v.a.) direkt anstelle des E-Bike DIsplays Kiox 300 von Bosch zu montieren. Das Garming Gerät rastet zwar nicht ein, klemmt…

Downloads
171
Likes
4
Rating
0
P
Printablesjoh

Bosch GCM8SJL circular saw vacuum hose adapter for Miele

Based on layershifter's adapter , remixed in Tinkercad. If you want to customize it, head over to Tinkercad :)

Downloads
155
Likes
28
Rating
5
P
Printablestimojito

Halter für 3x Schleifschwamm (z.B. Bosch Expert)

Damit kannst Du deine Schleifschwämme (ich habe diese hier: https://amzn.to/3b4Nq17 ) organisieren und den Halter z.B. an einen French Cleat Halter montieren. Die Schwämme sitzen perfekt und können vorne mit einer Hand rausgezogen werden.…

Downloads
151
Likes
22
Rating
4.75
P
PrintablesHeng

BOSCH GWS 12V-76 Halter / Toolholder

Basierend auf der Idee von « michisbarbq“ (https://www.thingiverse.com/thing:3971430) habe ich diesen Werkzeughalter so konstruiert, dass er der Maschine besseren Halt bietet. Die Löcher sind für 3,5mm Schrauben vorgesehen. Durch die…

Downloads
147
Likes
16
Rating
4.5
P
Printablestjsoco

Bosch ROS20VS sander+vacuum adapter (OpenSCAD)

Connect your sander to your vacuum cleaner. The OpenSCAD source file is provided so you can modify the model to suit your need. This is for a Bosch ROS20VS random orbital sander. The inside diameter of the vacuum hose is 38 mm. The…

Downloads
143
Likes
18
Rating
5
P
Printablesmedienlampe

Bosch Cool (2000)/4000/5000 Fast & Simple Window Hose Adapter (STEP file included)

Background There are a lot of amazing and well thought through hose adapters for mobile air conditioners available, but these have quite long print times. I'm impatient and wanted something which is simpler, uses the available parts of my…

Downloads
140
Likes
11
Rating
0
P
PrintablesDusBus

Gridfinity - 5x2 - Holder for Bosch Gluey + spare glue sticks

Organize your crafting essentials with the Gridfinity 5x2 Holder, specially designed for Bosch Gluey and spare glue sticks. This holder provides a neat and accessible storage solution, ensuring your glue gun and extra supplies are always…

Downloads
130
Likes
23
Rating
5
P
PrintablesPeopleware

Bosch Cookit "Dummy Deckel"

ACHTUNG: Bitte neue Revision verwenden, diese findet ihr hier bei Printables ATTENTION: Please use the new revision , you can find it here at Printables…

Downloads
123
Likes
10
Rating
0
P
Printablessorenrandum

Bosch 36V Wall Mount

wall mount for the Bosch 36 V battery. the wall mount can be attached with 4mm screws.

Downloads
121
Likes
7
Rating
5
P
Printablesrhoen_bastel

osVAC Absaugadapter für "Bosch PSM 18Li"

Adapter für den "Bosch PSM 18Li" zum osVAC System. Innendurchmesser: 29,80mm also für 30mm Anschlüsse vom Gerät. (Passt mit etwas Kraft perfekt auf den Schleifer) Allgemeine Infos zum osVAC System: https://ossso.de/osvac/…

Downloads
105
Likes
19
Rating
5
P
PrintablesScijoe

Box for Bosch Zamo 3rd Gen with accessories

This is a box for the Bosch Zamo 3rd Gen laser measure and its 3 accessories (tape, wheel and line adapter). The lid snaps on firmly and the parts are easy to take out. After i printed my box i added a little cutout to the pocket of the…

Downloads
101
Likes
6
Rating
5
P
PrintablesPeopleware

Bosch Cookit Offener Deckel Revision 2

Revision 2 Dies Das ist Revision 2 des offenen Cookit Deckels und ersetzt die beliebte Vorgängerversion . Diese Revision ist passgenauer und vor allem formstabil. Die Vorgängerversion verformte ich mit der Zeit vor allem bei…

Downloads
84
Likes
11
Rating
5
P
Printablesc1biker

BSH (Bosch, Siemens, Neff, Constructa) Dishwasher Clip

This model was designed to be easily printable on a Prusa Mini+ . For this reason, the overall dimensions are optimized for the build volume of this printer. Another key design goal was to allow printing with as few supports as possible.…

Downloads
82
Likes
7
Rating
0
P
PrintablesMarcus

Bosch POF 1400 ACE Router Guide for 8 inc subwoofer

Needed to deepen the subwoofer in to the front of the speaker box so i made a guide for the router. you need a 5mm bolt and a 5mm drill the routerbit is 12mm wide

Downloads
78
Likes
20
Rating
0
P
PrintablesCristi

Bosch accu support - 36V

Support for the 36V battery from Bosch.

Downloads
74
Likes
6
Rating
0
P
PrintablesCristi

Another Bosch accu support - 36V

Another support for the 36V battery from Bosch (refined in OnShape).

Downloads
72
Likes
5
Rating
0
P
Printables3DeXtruder

Bosch ZAMO Box

Really good fitted for Bosch Zamo newer version digital laser measure

Downloads
69
Likes
16
Rating
5
P
Printablesdym801

Fixation pour chargeur Bosch AL1820cv

Sur inspiration de gloda et Andy Forsberg , un redesign pour le AL1820cv. Fixation murale pour chargeur Bosch AL1820cv Impression en PLA en 0,2mm sans support

Downloads
68
Likes
8
Rating
5
P
PrintablesJohn

Socket Lockring Chainring Bosch e-bike motor gen3

I've printed it in PETG with 100% infill and 3 perimeters. No need for support. As you can see in the picture, it worked well for me. It doesn't need much torque.

Downloads
67
Likes
7
Rating
0
P
PrintablesCastulus

[REMIX] Rugged box for Bosch Zamo Laser Measue

Remixed the rugged box by @Whity / @Yanev to fit a Bosch Zamo. The box is smaller than the original packaging and of course more rugged. It has a little compartment for things. Printed in PETG. You will need 6 pieces M3 x 30 screws for…

Downloads
55
Likes
11
Rating
0
P
Printableshth

Bosch GSR 10,8 V 12 V Wandhalterung

Bosch GSR 10,8 V 12 V Wandhalterung

Downloads
47
Likes
4
Rating
0
P
Printablesbamseaske

Wall holder for the Bosch GFK600 router

I made this wall holder for my Bosch GFK600 router, so that it goes on the wall in my shop, when I'm not using it. It prints like this: - Place bottom down - Infill 50 - Support everywhere Gcode for this setting is provided, and the…

Downloads
43
Likes
7
Rating
0
P
PrintablesMinietec

Bosch Fuse holder / Torpedo-Sicherungshalter

Two part model with integrated flex part. The flex inlay has to be printed first and be installed into the second part (pause in gcode). The holder holds the fuses so they can't fall out (Ideal for storage in the car or similar). The…

Downloads
39
Likes
5
Rating
0
P
Printablesdanielziegler

Adapter für Bosch Ergomixx

Dieser Adapter dient dazu, dass wir Einsätze einer defekten Küchenmaschine trotzdem noch mit unserem Bosch Ergomixx benutzen können. Supports: Nein Rand: Ja PETG (da hitzebeständig für den Abwasch;) Ich empfehle einen etwas langsameren…

Downloads
37
Likes
8
Rating
0
P
Printablesmacsddau

BOSCH PEX400AE to FESTOOL CT17 connector

Connect BOSCH PEX400AE to FESTOOL CT17 44mm vacuum hose. Self locking on sander.

Downloads
37
Likes
3
Rating
0
P
Printableszt

Bosch GSR18V-21 Hex Bit Holder

A simple hex bit holder for possibly anything Bosch that has a ~6mm hole for screw.

Downloads
36
Likes
7
Rating
0
P
Printablesgwendal

BOSCH GWS13-50VSP Plug-It adapter

Replace the cable with a plugit adapter. The change is reversible. Needed: Festool replacement part # 491996 (High power version, from the Festool Router OF1440, since the grinder can draw 13 amps) two #6-32 x ½'' machine screws To…

Downloads
35
Likes
5
Rating
0
P
Printableszachi40

Bosch GDR Bit Holder (Remix of Magnetic Bit Holder for Bosch Drill)

This remix modifies the excellent original Bosch GDX magnetic bit holder to work with the Bosch GDR impact driver series. Changes include: Added through-holes so long bits can pass completely through. Maintained compatibility with…

Downloads
33
Likes
4
Rating
0
P
Printablescomartist

Extension shelf for Magnets Holder in hanging insert in a BOSCH L-Boxx / Sortimo LB 238/374

As an extension, I created another storage box for the hanging insert in a BOSCH L-Boxx / Sortimo LB 238/374. This fits perfectly under the holder of my mounting magnets. Ideal for storing small parts. Print Settings Printer: Prusa I3…

Downloads
32
Likes
5
Rating
0
P
PrintablesMaxasRena

Inlets for Bosch Professional Accessories box

I used the Bosch Professional Accessories 2608522363 box for around 8€. https://www.amazon.de/gp/product/B01N23C3ON/ I got a few of those boxes to organise the stuff for my mobile tools. I will add more trays as I design and test them.…

Downloads
30
Likes
7
Rating
0
P
PrintablesUB909

Bosch 18V Power4All Battery Wall Storage

Allows to store 18V Bosch batteries

Downloads
29
Likes
3
Rating
0
P
PrintablesIrgendeintyp

Oventrop UniBox Cover for Bosch Smart Home Radiator Thermostat II

This cover allows you to install a Bosch Smart Home Radiator Thermostat II within an Oventrop UniBox, enabling control of your underfloor heating circuit. Important: Please note that the peg spacing and dimensions from the original design…

Downloads
25
Likes
2
Rating
0
P
Printablesavolkov

Bosch 1617EVS 2x4 jig

This is a jig for Bosch 1617EVS fixed base plate to cut a grove in 2 “inch” side of 2x4 or 2x3, and by “2” “inches” I mean 38.5-ish mm. The max acceptable “2” “inch” side is 39mm. I gave the jig tolerance of 0.5mm which is a lot for a 3d…

Downloads
23
Likes
8
Rating
0
P
Printablescomartist

Holder for mounting magnets in a BOSCH L-Boxx / Sortimo hanging insert LB 238/374

As a car wrapper, I need my wrap lettering tools on a daily basis. I created the holder for mounting magnets for the hanging insert in a BOSCH L-Boxx / Sortimo LB 238/374. With the magnets, large car films or posters can be aligned, fixed…

Downloads
22
Likes
3
Rating
0
P
Printableswenjuk

Bosch GAS 40 to 100mm diameter adapter with 90° bend.

Adapter that adapts the Bosch GAS hose to an outer diameter of 100 mm with 90° bend.

Downloads
21
Likes
3
Rating
0
P
PrintablesFifi_M

Drill Press Spinner Handle for Bosch PBD40

I modified VerbalInsurec_260682's design to make a wheel spinner that fits my Bosch drill press. It is a useful upgrade for the hand wheel that is otherwise difficult to use. Instead of pausing the print to insert the bearing and then…

Downloads
19
Likes
1
Rating
0
P
PrintablesSchaffer.la

Bosch GSR-18V bit holder

Attaches to the belt clip mount using a 4mm screw. very handy when you need two types of tool bits on the same project

Downloads
15
Likes
3
Rating
0
P
PrintablesRevolt

Bosch Zamo laser measure adapter cover

A simple and easy to print cover to protect the pins of the adapters (e.g. the wheel adapter ) for the Bosch Zamo laser measure tool .

Downloads
15
Likes
1
Rating
0
P
PrintablesPhylius

BenchTop Disc Sander / BOSCH blender CNSM10 / 12.5 cm disc sander

THIS IS NOT A TOY AND CAN BE DANGEROUS! This model is mostly supportless & can be built without taking the electronics apart (no need to de-solder electronics). UPDATE LIST & EXPERIENCE: So I tought that the motor was exclusively built by…

Downloads
15
Likes
1
Rating
0
P
PrintablesStonyMtn

Makita 18v Sander to Bosch Dust Extractor

I made an adaptor from my Makita 18v to my Bosch Dust Extractor. I made it in PETG with 20% infill and it has worked great.

Downloads
14
Likes
3
Rating
0
P
PrintablesMath

Bosch Ratcheting Screwdriver mount for Skadis

Remix for a Bosch Ratcheting Screwdriver (Bit-Ratschenschraubendreher) with 12 bits that attaches to the IKEA Skadis. The through-hole is 10mm in diameter and the body of the mount was stretched in order to accommodate the 40mm diameter…

Downloads
13
Likes
3
Rating
0
P
Printablesmageb

Improved knob for Bosch GCL 2-15

The original slide switch knob is not very ergonomic - so break it off and replace it! You have to break off the original knob. So do this at your own risk! I have printed the new knob in red PETG using tree supports and 0.15mm layer…

Downloads
13
Likes
1
Rating
0
P
PrintablesJiří Štivar

Kolečko vysavače Bosch ProPower 2.0 (Vacuum cleaner wheel)

Druhá verze je pro nasazení na želenou tyč o průměru 6mm. The second version is for use on an iron rod with a diameter of 6mm.

Downloads
11
Likes
1
Rating
0
P
Printablescombobulator

Lens Cover for Bosch GTC 400 C Thermal Camera (16055002CR)

Lost the lens cover for my Bosch thermal camera so I decided to recreate it based on photos and share it here in case anybody else needs it. It fits perfectly and follows the original design as closely as it can. There is, however, an…

Downloads
10
Likes
1
Rating
0

prowadnica do szyny Mafell /Bosch FSN dla frezarki Festool of1400

prowadnica do szyny zagłębiarki Mafell/Bosch FSN do Frezarki Festool of1400. Należy do wydruku zastosować dwie nakrętki 6mm i dwie śruby 6 mm w celu unieruchomienia prętów prowadnicy.

Downloads
10
Likes
5
Rating
0

Tool holder for Bosch GBH series drilling hammers

EN: The holder is used for attaching various accessories to the Bosch GBH professional drilling hammer (e.g. vacuum cleaner nozzle, drilling depth indicator, etc.). The holder consists from two parts and both are connected with screws,…

Downloads
8
Likes
3
Rating
0
P
Printablessraj

Bit holder pre Bosch GSR 185-LI

potreba neodym magnet 10x10x2 M3 x 20 imbus, valcová hlava

Downloads
8
Likes
3
Rating
0
P
PrintablesAnbuubnA

Vacuum cleaner nozzle holder for Bosch Relaxx

Simple holder for 3 nozzles on the Bosch Relaxx's vacuum cleaner. Makes this vacuum cleaner a little more user-friendly;-) Can be printed quickly and with a high layer thickness. It is best to place the outside on the print bed. So that…

Downloads
7
Likes
1
Rating
0
P
Printablesastonma4ten

Bosch Professional 18V Drill Trigger

Files included: -STL I've printed it on a Prusa MK3S (PETG) and I've used the following settings. -Print settings: 0,2mm QUALITY -Perimeter: 5 -Infill: 40% -Infill patern: Gyroid -Support material: organic I recommend printing at 90%…

Downloads
6
Likes
1
Rating
0
P
Printableskerngebiet

Universal cordless Drill Holder/Mount (Makita, DeWalt, Bosch, Festool ...)

Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course. The following Makita tools have been tested so far in the 40mm version: Makita DTD171 Makita DDF484…

Downloads
22,554
Likes
7,471
Rating
4.88
P
Printablesoktane

Universal Cordless Drill/Driver Holder/Mount (Milwaukee, Makita, DeWalt, Bosch, Ryobi, Ridge, Festool)

Universal Cordless Impact Driver/Drill Holder A universal cordless Impact Driver/Drill Holder meant to organize your workbench as well as make it more ergonomic and easier to use. Front extrusion allows for it do double as a bottle…

Downloads
4,555
Likes
1,066
Rating
4.55
P
PrintablesGLOUPY

Bosch Professional Wall Battery Holder (18V)

This is a simple battery holder for Bosch Professional 18V batteries that you screw on a wall. I tried to use as less filament as possible. It is still interlockable, meaning you can add as many holders that you need next to each other…

Downloads
3,993
Likes
437
Rating
4.89
P
Printables3DDIY

Festool, Makita, Bosch Track Saw Rail Holder

This is my designed version of the Fastcap Rail holder. This has a a design where the cam is print in place. So no extra hardware is needed to set up the lock. This should fit most track saw rails. Kreg and Bosch will need some editing to…

Downloads
3,429
Likes
605
Rating
4.79
P
PrintablesUfoprint

E-Bike Ladegeräthalter für Bosch 4A Charger Smart System

Wandhalterung für den Bosch 4A e-Bike Charger (Smart System ab Modelljahr 2022 BPC3400), Befestigung mittels 2 Senkkopfschrauben ø 4mm.

Downloads
3,238
Likes
227
Rating
5
P
Printablesvivamus3d

Bosch GSR Bit Holder (Cordless Drill/Driver)

I liked the Bit-Holder for cordless screwdriver (Bosch) and had used it for several month, until eventually it broke recently as it has a weak spot at the right arm. As anyway the original was way too tight (had to scale up and expand the…

Downloads
2,777
Likes
118
Rating
4.75
P
PrintablesAndréG

Drill sharpener for Bosch angle grinder

Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…

Downloads
2,724
Likes
947
Rating
5
P
PrintablesEpp

Bosch Sortimo L-Boxx 102 / 136 / 238 / 374

This is a CAD drawing for Bosch / Sortimo L-Boxx in the sizes 102 / 136 / 238 / 374.

Downloads
2,670
Likes
175
Rating
5
P
PrintablesRenba

Drill Dust Collector (Strong Self Holding !) for Bosch, Festool, Hilti, Makita, Milwaukee,...

Please as a simple return for the job... Like, Share, and Post your prints ! Thanks ! Optimized for printing vertically like a breez.. No supports needed ! ;) Original file fit on 35mm diameter tube (Festool, Bosch,…) Update 05 November…

Downloads
2,580
Likes
612
Rating
5
P
Printablescoxx

Bosch 12V battery holder

Holder for Bosch 12V battery I edit inside shape (-0.1mm) - some of you had to applied offset...

Downloads
1,958
Likes
204
Rating
4.84
P
PrintablesAndreas Gohr

Bosch PBD 40 Wheel Knobs

Some people really like the wheel on the Bosch PBD 40 drill press, others replace it with a traditional 3 axle cross. I got inspired by a different idea by user mbatorowicz over at Thingiverse. He added a knob to the wheel. However there…

Downloads
1,801
Likes
206
Rating
4.89
P
Printables6d6178

L-Boxx Mount / Mounting Bracket for Bosch & Sortimo

This is a mounting bracket for the L-Boxx storage boxes by Bosch & Sortimo / BS Systems that works with the L-Boxx G4 and previous gen. L-Boxx. For drawers, shelves, wall-mounting, etc. Features Allows one-handed clipping in and clipping…

Downloads
1,743
Likes
250
Rating
5
P
PrintablesRichiH

Jigsaw saw blade holder (Bosch, Festool, Ryobi, DeWalt, Makita, etc)

A set of saw blade holders for all common electrical jigsaws. The lids clip on and will stay on even if you turn the holder upside down and shake hard. Your saws won't fall out even if you toss your toolbox around. Chamfers make inserting…

Downloads
1,491
Likes
497
Rating
4.94
P
PrintablesJousty_xx

Bosch L-Boxx / lboxx Adapter für Lidl Parkside Performance Werkstatt Staubsauger PPWD 30 A1/A2

This is an adapter for mounting the Bosch L-Box on the Parkside Performance vacuum cleaner. 6 parts need to be printed. I printed the plug connections and mechanically stressed parts with 100% infill. If you have any questions or…

Downloads
1,477
Likes
119
Rating
5
P

Bosch GSR 12V-15 Battery Screwdriver Holder

Hi Here you can find holders for a Bosch GSR 12V-15 and its charger for wall mounting. I've made a single bracket up to a triple bracket depending on how many you have. The chargers are simply inserted into the holder from the top, the…

Downloads
1,447
Likes
213
Rating
5
P
Printablesbernard maurin

Bosch Sortimo L-Boxx 102 / 136 / 238 / 374 STEP files

Bosch / Sortimo L-Boxx in the sizes 102 / 136 / 238 / 374 in STEP format for those who don't have Fusion 360

Downloads
1,445
Likes
93
Rating
0
P
PrintablesVolan

Bosch Battery Stand and Drill Bit Holder v.1.3

A stand for the 12V Bosch Battery, and bit holder for the GSR 12V-15 FC drill. The bit holder may fit other Bosch drills if they have the same rubber band it attaches to. Apparently the bit holder also fits the Bosch GSR 12V-20 brushless…

Downloads
1,415
Likes
228
Rating
5
P
PrintablesAlexandre

Bosch 12v GSR/GDR Drill Driver Impact Wall Holster

Slim version remix of the original. Two versions - for the drill/driver and larger for the impact driver. Reduced overhangs. I printed mine upright in ABS, 20% infill, 3 walls, 0.2 layer height. My first model/remix. Used basic tools in…

Downloads
1,406
Likes
158
Rating
4.89
P
Printablesstianberg2

Bosch 12V battery holder

A holder for 5 x 12V Bosch batteries. Easily attached to a wall using two screws. Upper layer can be printed using a different color for a nicer finish (see pictures)

Downloads
1,402
Likes
183
Rating
5
P
Printablescbr1000

Bosch 18 Volt

Bosch Akku Halterung für 18 Volt. Perfekt um die Akkus ordentlich aufzuräumen in der Werkstatt.

Downloads
1,352
Likes
146
Rating
4.79
P
PrintablesMads Skov

Bosch Professional 12V / 10.8V tool wall holders

I'm organizing my Bosch 12V power tools on a sheet of plywood on the wall in my workshop. With these 3D printed mounts, I can easily and safely hang my Bosch tools when they are not in use. All the tools hang on their battery socket. It…

Downloads
1,351
Likes
147
Rating
4.9
P
PrintablesPeter Serup

Bosch-12V_Battery-holder

Bosch-12V_Battery-holder - No Support There might be a slight variation the the dimensions of the batteries. this model should fit 3A (My 2A batteries have a slightly looser fit)

Downloads
1,333
Likes
204
Rating
4.75
P
PrintablesPeut

Bosch Green DIY 18V Battery Mount (Power for all Alliance)

Battery mount with retainer for the Bosch Green batteries, this is the DIY series from Bosch. This mount does also fits other batteries in the Power For All alliance series. Reupload from Thingiverse. Printing instructions: Layer height:…

Downloads
1,309
Likes
98
Rating
4.93
P
Printables100prznt

Bosch 14.4 and 18 V Battery Mount

Since I couldn't find a really good fitting holder for my Bosch batteries, I drew a holder myself. If you have your slicer settings under control and use a calibrated printer, the Bosch batteries fit into the printed holder with a little…

Downloads
1,284
Likes
147
Rating
4.8
P
Printablesolgapavlova

Karcher WD3 to Bosch and Makita tools

Bosch PST 650 jigsaw. Makita BO 5030 sander. Makita 9910 sander. Bosch PKS 40 circular saw. 2 mm width. Category: Parts

Downloads
1,238
Likes
250
Rating
5
P
Printablesoftech

Charging station for Bosch E-Bike Powertube (+ Smart) 500 / 625 / 750 Battery

German Dies ist eine Ladestation und Wandhalterung für Bosch PowerTube (+ Smart) 500, 625 und 750er E-Bike Akkus in horizontaler und vertikaler Ausführung, sowie mit hinterem und vorderem Kabelauslass (die Version mit vorderem Auslass ist…

Downloads
1,172
Likes
121
Rating
5
P
PrintablesHans

Bosch PBD40 Knob

I liked the design by Andreas Gohr and changed a few things to my taste: chamfers on the mounts one mount with hex nut trap, so now two different mount pieces exist only 1 mm gap between the mounts that disappears if screwed tight BOM is…

Downloads
1,154
Likes
159
Rating
5
P
PrintablesSimple3D

Bosch 36V Ebike Battery connector & DIY 2A Charger

I wanted to be able to charge my Bosch Powerpack 500 battery in my car when I'm on trips. Unfortunately the standard 4A Bosch charger pulls 170Watts which is more than my car's AC Inverter can support. I also tried to use my 300Watt Pure…

Downloads
1,143
Likes
62
Rating
4.67
P
PrintablesBenny_

Bosch 18V battery holder

If you print it upright, you do not need supports (Rotate 90 degrees). The material doesn't matter, but I used PETG. If you don't want to screw into the wall, you can attach the battery holder to the wall with double-sided tape.

Downloads
1,119
Likes
101
Rating
5
P
PrintablesKevin Scott

Bosch GCM12SD Axial Glide Miter Saw Zero Clearance Insert

I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.

Downloads
1,077
Likes
118
Rating
4
P
PrintablesBiggiPL

Bosch 18V Battery Holder

Easy to print, nice to use. Remix from Parkside holder. Additional f3d file with parameters which enable you to adjust it for batteries of other make.

Downloads
1,024
Likes
68
Rating
5
P
PrintablesMike Rainbow

Bosch 115mm angle grinder drill bit sharpener attachment

Ive designed something to clamp over the existing guard on a bosch 115mm angle grinder then clamp your angle grinder to a bench to sharpen 12mm, 10mm, 8mm, 6mm, 5mm, 4mm drill bits 2x 90mm 8mm bolts & nuts required. mine are my usual CF…

Downloads
1,022
Likes
149
Rating
5
P
Printablesdym801

Casiers Bosch L-Boxx 136

Différents casiers pour meubler une L-Boxx Bosch taille 136mm. Particularité : il faut imprimer 2 coins tels quels et 2 coins en mode symétrie . Impression simple en PLA ou autre, en 0,2mm sans support --------------------------------…

Downloads
1,016
Likes
193
Rating
5