Search results: c11

Sort order

241 models

P
PrintablesBiTN

TP-Link Tapo C100/C110 GoPro mount

GoPro mount for TP-Link Tapo C100/C110 IP camera Print instructions Category: Camera Summary GoPro mount for TP-Link Tapo C100/C110 IP camera Print Settings Printer: Prusa MINI Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 Infill:…

Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
432
Likes
48
Rating
5
P
Printablesrursache

TP-Link Tapo C100/C110 mount for Elegoo Neptune 4 Pro

How to Print all the gcode files or more explicitly: 2 x nut.stl 1 x arm.stl 1 x base.stl 1 x mount.stl arm.stl must be printed with 100% infill so it's strong and doesn't break when adding the nuts. supports are not needed Preparing the…

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
326
Likes
55
Rating
4.25
P
PrintablesRik M0RKM

CC1101 Flipper Zero Mount

Simply a mounting bracket for the CC1101, the bracket press fits against the dupont connectors and is hot glued into place. It is a evolution of @Oliverkayak mount model.

Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant

Downloads
142
Likes
17
Rating
0
P
PrintablesWeekdayWeekend

Ice Scooper Holder for Frigidaire EFIC117 Ice Maker

WHAT IS IT? This is a scoop holder for the Frigidaire Countertop Ice Maker model EFIC117. It doesn't come with one in the box, so this is my solution. Uses only approximately 3 grams of filament and prints in under 30 minutes depending on…

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant

Downloads
136
Likes
17
Rating
5
P
PrintablesPoota

Držák na kameru Tapo C110

Kloubový držák upravený na nasunutí na svěrku XTline 8 cm. Spoj na tyčce vyztužený převlečným válečkem. Díru ve spodním komponentu si případně upravte podle své svěrky. (Tinkercad) Kamera je na destičce zajištěna dvěma jistícími sponkami.…

Print approx. €0.17–€0.20 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
72
Likes
10
Rating
0
P
PrintablesRay J

RJ019 C1101 Flipper Zero Case

Case for my CC1101 attachment for Flipper Zero and Spacers. Use some white filament and flatten it for the led diffuser. Printed with eSUN PLA + Black on the below textured sheets Smooth Triangles https://s.click.aliexpress.com/e/_mrFsNmm…

Downloads
1,051
Likes
98
Rating
5
P
PrintablesSatyr

Dummy 13 Tapo C110

Please read before printing: This is work in progress. I’ve been inspired by @soozafone https://www.printables.com/pl/model/593185-dummy-13-printable-jointed-figure-beta-files design and after printing few other remix I ended up making…

Downloads
787
Likes
572
Rating
5
P
Printablesfkm492

ESPSomfy-RTS Case for ESP32c3 mini and C1101

Hardware case for ESPSomfy-RTS Project by rstrouse (thanx!) Integration for Homeautomation (as e.g. Homeassistant) for radio controlled Somfy Shades, Blinds pp. >> Project see https://github.com/rstrouse/ESPSomfy-RTS Case is for using…

Downloads
698
Likes
28
Rating
5
P
Printablesanno1996

ESP32 with CC1101 Case

Case for ESP32 Board (NodeMCU V2, Attention: only for the one with Mounting Holes!) and CC1101 Transceiver. Toolless assembly.

Downloads
644
Likes
26
Rating
5
P
PrintablesMake'n'Modify

1.3'' OLED EC11 Display with Encoder and Buttons Housing

A housing for the cheap 1.3'' OLED Display (SH1106) with Encoder EC11 like you find them on Aliexpress: https://s.click.aliexpress.com/e/_c37Z1MCx The housing is designed to take up the least amount of space. It is designed to work with…

Downloads
623
Likes
54
Rating
5
P
PrintablesHarry

TP-Link Tapo C100/C110 mount

Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…

Downloads
605
Likes
74
Rating
4.93
P
PrintablesKea Workshop

EC11 Encoder Knob

An Encoder knob for the EC11 D shaft & Plum shaft. Has a slight radius on the top, and vertical knurling on the sides. Designed for 15mm D shaft and 15mm Plum shaft, however will work with 20mm shaft also. Height = 15.5mm Diameter =…

Downloads
587
Likes
46
Rating
5
P
Printablesdansh

LilyGo T-Embed CC1101 back shell with external antennas and power switch

By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…

Downloads
541
Likes
43
Rating
5
P
PrintablesESPBoards

Rotary Encoder KY-040 (EC11) Housing with Snap-fit and Screw Mount

Simple housing case with Snap-fit for KY-040 or similar Rotary Encoder. It has a hole in a cover for easy mounting under a desk or anywhere else with a screw. Easy access to the 5-pin DuPont connector. KY-040 Rotary Encoder Module Spacing…

Downloads
474
Likes
37
Rating
4.5
P
Printablesf4r0kh

Flipper Zero CC1101 SubGhz External SubGhz Module CASE

I have made a custom slim case for my external SubGHz module for Flipper Zero. There are various types of SubGHz modules for Flipper, so please check the link below or the photos to make sure it fits yours. I have printed mine using a…

Downloads
458
Likes
36
Rating
4.75
P
PrintablesDaGov

Flipper Zero CC1101 external module cover

It needs to be printed on SLA resin printer. FDM not tested.

Downloads
422
Likes
75
Rating
5
P
PrintablesBeusekomse Baan

HSM / Nederlandse Spoorwegen - Wielstel C11 (Engels) - Gauge 1 / 1:32

As a favor for a fellow Gauge 1 enthusiast I designed the English bogies used by the H.S.M. (later Nederlandse Spoorwegen) on C11 carriages in Gauge 1 / 1:32. HSM C755 is preserved by "het Nederlands Spoorweg Museum".…

Downloads
417
Likes
28
Rating
0
P
PrintablesMakeseum

TP-Link Tapo C100 / C110 Base

Replacement base for TP-Link Tapo C100/C110 Cameras. I got a good deal on several of these cameras, but they were missing the bases, so I designed and printed some. I used Polymaker Polyterra PLA Cotton White just because it's matte and…

Downloads
402
Likes
38
Rating
5
P
Printablesdanoman

ESP32 + CC1101 Case (USB-C Devkit)

This is a case for the newer ESP32 Devkit V1 with the USB-C port. Dimensions must be around 52mm x 28mm. This case allows for the use of Dupont connectors, rather than requiring soldering. All wires can be stored below the ESP32. I used…

Downloads
371
Likes
19
Rating
0
P
PrintablesxxPRIMEVAL

Flashforge Adventurer 5M (AD5M) / TP-Link Tapo C100/C110/C101 Side Camera Mount

Flashforge Adventurer 5M Mount for the TP-Link Tapo C100, C110, C101 Camera. I made this one as there was no way to put my C101 inside the enclosure, and I didn't want it attached to the door. This mount is designed to work even with a…

Downloads
324
Likes
47
Rating
5
P
Printablesjuanmedinar20

Tamiya C11 Rear Wing and Diffuser

Tamiya C11 Rear Wing and Diffuser. It is modeled to be a closer representation of the real car with actual down force of 95 grams at 30mph. The top smaller airfoil needs to printed with supports on the underside and printed slow because…

Downloads
324
Likes
27
Rating
0
P
PrintablesMrNeedlemouse

TP-Link Tapo C100 / C110 Base & Wallmount

As I wanted the base in a different color than white, I made this from the original model. This model use the same distance for the screw holes as the TP-Link original mount. I made 2 versions with different tolerances, as the original…

Downloads
297
Likes
38
Rating
5
P
PrintablesTechJeeper

Snapmaker U1 Tapo C100/C110 Camera Mount

The perfect camera mount for the Snapmaker U1 leveraging the mounting point for the U1s tophat. Since the mount is rubberized it also provides some vibration protection. Tapo C110 (2k) - https://amzn.to/3M1R4Lc Tapo C100 (1080p) -…

Downloads
286
Likes
45
Rating
5
P
PrintablesPigeon

LilyGo T-Embed CC1101 Body SMA

A LilyGo T-Embed CC1101 Body with dual SMA antenna holes. This is the stock body part and is not optimised for FDM., so it will require well-tuned support setting.

Downloads
259
Likes
25
Rating
0
P
Printablesdonutcat

EC11 Rotary Encoder Knob - Spurred

Edit 22/27/07: Added updated files. Remade the design to be a little nicer on several different layer heights. Also added a “snug” variation of both versions that has a 6.1mm hole vs the 6.2mm default hole. Simple knob for an EC11 style…

Downloads
252
Likes
24
Rating
4.75
P
PrintablesInvalidNameUK

MegCam: A Tapo C100/C110 wildlife camera enclosure

A simple weatherproof enclosure for the TPLink Tapo C100/C110 WiFi security camera. I made this so I can watch the various neighborhood cats come in and out of our yard and to check on Meggy, the feral cat that we look after, who this…

Downloads
249
Likes
41
Rating
5
P
PrintablesAshley Florack

AD5M Screen Cover to hold Tapo C110 Camera

Remixed to add a spot to hold my Tapo C110 Camera. Must remove the base that the camera comes with.

Downloads
247
Likes
32
Rating
5
P
PrintablesTiffi226

TPLink Tapo C110 Camera Mount -- Bambu Lab X1C/P1S

A simple mount for the Tapo C110/C100 camera that uses the screw connection of the hinge. There are 8x3mm magnets embedded to support it, these can be used optionally if there are slight noises. Printed with normal support for the magnet…

Downloads
246
Likes
39
Rating
4.67
P
PrintablesFelte

Small Dual Rotary Encoder for EC11 15mm (G1000 and other Panels)

This is a smaller version of Dual Rotary Encoder from FlightSimMaker. EC11 15mm round shaft. Update 2021-12-11: Added CRS Knob Added new Knobs with more details (V2) Added new Case with mounts (V2) Print Settings Printer Brand: Prusa…

Downloads
245
Likes
28
Rating
0
P
PrintablesMyte

Flipper Zero External Sub-GHz CC1101 Module Case

https://www.reddit.com/r/flipperzero/comments/11s77sw/fully_unofficial_external_subghz_cc1101_module/

Downloads
237
Likes
30
Rating
0
P
Printablesjuanmedinar20

Tamiya Mercedes C11 Mirrors

Tamiya Mercedes C11 Mirrors. 2 Piece with no supports needed. Print vertically and I used a 0.2mm nozzle with 0.1mm layer height for best finish with zero infill. See picture for how to assemble them with superglue and I also used…

Downloads
222
Likes
23
Rating
0
P
PrintablesMcGr3g0r

Raspberry PI Pico / RP2040 cc1101-tool chassis

RP2040 + cc1101 in one chassis. The device is working with cc1101-tool firmware from github my fork: https://github.com/McGr3g0r/cc1101-tool my new tool: https://github.com/McGr3g0r/cc1101-wizzard most recent FW+apk:…

Downloads
222
Likes
25
Rating
5
P
PrintablesChado

Various D19H20 EC11 Compatible Encoder Knobs

For a project of mine I designed couple of encoder knobs for EC11 rotary encoders , here are the specifications; For 20mm EC11 shaft lenght I made 13mm shaft slot Shaft/Post diameter is 3mm Knob diameter is 19mm Knob height is 20mm There…

Downloads
206
Likes
19
Rating
0
P
PrintablesStofflHD

TP-Link Tapo C100 / C110 Base with screw holes

I added two holes to screw it against the wall and I also removed the holes for the rubber feets Printed with: 4 Walls 20% infill (Grid)

Downloads
205
Likes
24
Rating
5
P
PrintablesExpiredTapWater

Tapo C100/C110/TC60 Camera Thin Case & Mounting Solution

Really liked the looks of capze 's design, but needed a way to securely and universally mount the camera to any current and future projects, and felt like it could be even thinner. The original STL was hard to make precise changes too, so…

Downloads
204
Likes
51
Rating
5
P
PrintablesTom_FXT

Lilygo T-Embed CC1101 enclosure

Work in progress version. Needs a few tweaks here and there, STEP files are included if you want to make changes. Hardware: M2.5x16 screws (ISO4762/DIN912) - 4pcs M2.5 heat set inserts, 5 or 6mm long - 4pcs M2.5x5mm flat head screws for…

Downloads
197
Likes
27
Rating
0
P
Printablesleavic

LilyGo T-Embed CC1101 Power Switch Back Shell

LilyGo T-Embed CC1101 is a cheap alternative for flipper zero,but there is one small issue:there is no power switch for device.Even works in deep sleep mode,the battery drained in two days. So I modified the official shell to add a power…

Downloads
194
Likes
26
Rating
0
P
PrintablesmrFenyx

TP-Link Tapo C100/C110 Rail Mount for Anycubic Kobra Printers

UPDATE 24.11.2023 Added a second version of the model with stronger, tighter fit and that now uses 2 of the V-Slots. This way you can put more pressure on the camera (for example when orienting it) without it coming free of the rail.…

Downloads
194
Likes
16
Rating
5
P
Printablesdonutcat

EC11 Rotary Encoder Knob - Spiral Fluted

Another simple patterned knob for EC11 knurled-style encoders. Little bit thick for direct fit onto some control panels, but with a bit of a spacer would be fine, or with z scaling down.

Downloads
186
Likes
17
Rating
5
P
PrintablesKaktus

LilyGo T-Embed CC1101 back shell with external antennas and power switch 6x3magnets,screws, without magnets

1 version - with magnets 6x3 2 version - with screws, but without a hole for the switch 3 version - without magnets By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in…

Downloads
183
Likes
14
Rating
0
P
PrintablesJayWll

Tapo C100/C110 Camera Mount

I've been looking around for a mount for my tapo cameras and I wasn't quite finding what I was looking for, so I'm going to be building my own. I also couldn't find any specs on the dimensions of the mounting holes on the base of the…

Downloads
180
Likes
34
Rating
0
P
Printablesfl0cke

Tapo C110 16mm Clamp Holder

I've found this Tapo C110 Clip, printed it and noticed afterwards, that it doesn't fit my pipe diameter. So I've modded it so that it fits a 16mm pipe, works like a charm! Credits goes to BlushTTV and his original design:…

Downloads
173
Likes
26
Rating
5
P
PrintablesA_ilterish
Downloads
169
Likes
19
Rating
0
P
PrintablesJayWll

Tapo C100/C110 Magnet Mount

A simple mount that adds magnets to the base of a Tapo C100 or C110 camera. The pegs on this mount fit into the mounting holes on the base of the camera, and the other side of the mount is sized for a 10mm x 3mm circular magnet . I put a…

Downloads
167
Likes
20
Rating
0
P
PrintablesA_ilterish
Downloads
163
Likes
20
Rating
0
P
PrintablesT3CHKOMMIE

Cases for REK5LAB CC1101 NRF24 and ESP32 Boards

The main board case uses 2 M3 screws. You will need to use a tap and die set to get the threads nice. The CC1101 case uses a single M3 screw. The NRF24 case uses a small blob of super glue to ensure the case stays together. Print in…

Downloads
155
Likes
22
Rating
5
P
PrintablesMarkG

New Remix of Prusa MK4 universal webcam mount - Tapo C100 C110

2024.06.01 update V2 - Better socket for camera. Really liked the original model, but i have Tapo Cameras at home, so i modified the model a bit, this way it can hold now Tapo C100 or C110 cameras.

Downloads
151
Likes
31
Rating
5
P
PrintablesFCUK

2.4 inch TFT display screen with EC11 rotary encoder combination module SPI interface LCD display screen

The ESP32-S3 is just hot glued to the tft for now. Printed in ABS. but can be printed in whatever you want. You can crazyglue the top button trim but I found that just the bolt from the encoder is enough to hold everything in place. If…

Downloads
150
Likes
17
Rating
5
P
PrintablesDrop.3D

Tapo C100/C110 CORE One Camera Mount

Introduction I wanted to reuse my budget-friendly Tapo C110 camera, which I originally bought for the MK4, with my Prusa Core One. This custom case allows for easy mounting in one corner of the printer, similar to the Buddy3D camera…

Downloads
148
Likes
38
Rating
5
P
PrintablesSteven Boden

Elegoo Centauri Carbon Tapo C110/C100/TC60 Camera Mount

The camera holder attached to the Centauri carbon glass door using the two screws on the top hinge. The housing is designed to reuse these screws so that no extra hardware is required. There are two versions of this model, a clean version…

Downloads
147
Likes
22
Rating
5

Prusa MK4 (original, not MK4S) Camera Holder for TP-Link Tapo C200 and C110 camera

For this camera: https://www.amazon.com/TP-Link-Tapo-Wireless-Security-C200/dp/B0829KDY9X?th=1 Or this one: https://www.amazon.com/dp/B09YL7JPXY?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1 Uses the 4 screws on the front-left of your MK4…

Downloads
147
Likes
26
Rating
4.75
P
PrintablesMaster Yoda

CC1101 M5Stack Case

This is a CC1101 case to use it with the M5Stack Plus 2.

Downloads
142
Likes
33
Rating
5
P
PrintablesAresROC

Flipper Zero NRF24 Case & Window CC1101

Flipper Zero NRF24 Case & Window CC1101 Remix for NRF24 Antenna Added space for Antenna Space for module pins

Downloads
140
Likes
16
Rating
5
P
Printablesdickie24

Arduino Nano V3 cc1101 case another

Case for usb cul stick adjust it with the scad file Print instructions Category: Electronics

Downloads
140
Likes
13
Rating
5
P
PrintablesLupilpl

Tapo camera C100, C60, C110 mount for each surface.

Tapo camera mount. Mount as you need: double-sided adhesive tape, magnets, screws, cable ties, zip ties Magnets holes - 10 mm outer diameter, 5,2 mm deep

Downloads
138
Likes
20
Rating
5
P
Printablesntdesign

Magnetic mount for Tapo C100 / C110

The mount has an exit port for the barrel connector. The back is open (for microphone & speaker), and the SD slot is accessible. Camera can easily be removed, tested with C110 (C100 should probably work). I tested only the 5° tilted…

Downloads
138
Likes
29
Rating
4.5
P
PrintablesVirovision

Flashforge Adventurer 5M Tapo C11X Camera Holder Top Down

This is a remix of the screen enclosure with camera mount moving the camera holder to the top and flipped.

Downloads
136
Likes
19
Rating
0

EC11 rotary knob with vertical patterns (height easily adjustable)

Initially I tried criss-crossing patterns but it doesn't grip well, so I made vertical ones. Heights n stuffs should be easily adjustable with CAD softwares.

Downloads
133
Likes
4
Rating
0
P
PrintablesBlushTTV

Tapo C110 Homebox/Growbox Clip (21.68mm)

Hier hab ihr einen Kamera Halter für die Tapo C110 (ca 25€ & super Homeassistant Einbindung) für eure Growbox zum einfachen anstecken. Der Halter ist für Stangen einer Homebox Ambient Q100 oder Stangen Durchmesser von ca. 21.68mm. Lässt…

Downloads
132
Likes
17
Rating
5
P
PrintablesKrakka10

Tapo C100/C110 holder for Prusa MK4/MK4S

To be printed with Prusament PETG 0.2 QUALITY 20% infill

Downloads
128
Likes
39
Rating
5
P
PrintablesAtrica3D

CC1101 Flipper case multicolor text (No mmu)

Just a simple remix.. For people who only has the standard sheet and want something nice aswell ;) I removed the hole for the LED aswell, because i didnt have an intention of using it. I will do more variations on request. I was thinking…

Downloads
127
Likes
13
Rating
0
P
PrintablesNakka

Parametric Booooom for Tapo Camera C100, C110, C111

This parametric boom extends the length of the standard camera mount by any size you want. The parametric OpenSCAD model allows setting the length and fine-tuning parameters as needed. …or simply use one of the STLs I've rendered for you.…

Downloads
125
Likes
21
Rating
5
P
PrintablesSpicy3d

Wurkkos FC11 Diffuser

You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…

Downloads
124
Likes
22
Rating
5
P
Printablesidesignstuff

EC11 Knob for standard D-profile shafts

Minimum height for a 15mm shaft EC11 encoder, small enough to fit in choc-spaced keybaords. Conceals layer lines with shape. No support necessary. Built in OnShape

Downloads
123
Likes
5
Rating
0
P
PrintablesBushay

Rotary Encoder EC11 Knob

just a Knob for Rotary Encoder EC11 with Flatted Shaft leave a like and make thank you :)

Downloads
123
Likes
10
Rating
5

TP-Link Tapo C100/C110 Base for mount on IKEA Skadis Pegboard

Attachment of the Tapo c100/110 camera to the Skadis board.

Downloads
120
Likes
16
Rating
0
P
PrintablesJayWll

Tapo C100/C110 Right-Angled Wall Mount

An angled bracket allowing you to mount a Tapo C100 or C110 to a wall or other vertical surface. You can either have the camera platform face upward or forward - either will work. The pegs on the bracket fit in the mounting holes on the…

Downloads
118
Likes
9
Rating
0
P
PrintablesHarrie

Remixed*ESPSomfy-RTS Case for ESP32c3 mini and C1101

Took the model from fkm492, added screw holes for the C1101. Keeps the module better in place, with the antenna weight.

Downloads
113
Likes
11
Rating
5
P
PrintablesCody Tolene

Flipper Zero - CC1101 Board by TehRabbitt - Case

A quick case I put together to fit the CC1101 expansion board made by TehRabbitt. The board can be purchased on Tindie here . The board is designed to be used with the Flipper Zero, which can be found here . To assemble the case, you'll…

Downloads
113
Likes
24
Rating
5
P
PrintablesAndrej

Breadboard Mount for 1.3" OLED Display with EC11 encoder ESP Arduino

If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl This set is designed for breadboard-based prototyping with Arduino and ESP32…

Downloads
112
Likes
27
Rating
0
P
PrintablesNicolai clausen

I have this cover for LilyGo T-Embed CC1101

here is a cover for LilyGo T-Embed CC1101 that you can choose yourself what color it should be instead of the standard cover that comes with it when you buy it This also saves you from having to destroy the original antenna to retrofit…

Downloads
111
Likes
11
Rating
0
P
PrintablesWoyard

Wurkkos FC11 holder/mount

Designed a holder to attach my Wurkkos FC11 to a mount from a broken bike light and it came out really nice with lots of grip (holds firmly even on pretty rough terrain) When I looked for files for a holder I didn't find any, so I'm…

Downloads
108
Likes
15
Rating
5
P
PrintablesGSmith

Tapo C100 / C110 Camera Clip On Mount for Prusa XL

A streamlined, simple mount designed to perfectly align the Tapo C110 camera with the top rails of the Prusa XL, ensuring a seamless and secure fit. Material: PETG 30% Infill Supports on build plate only

Downloads
104
Likes
10
Rating
5
P

Insert for DC110 Niimbot

I made an insert for this box that help my NIIMBOT DC110 and two rolls of sticker and also the usb charger

Downloads
102
Likes
21
Rating
5
P
PrintablesEric Charles

CC1101 Case for Cardputer ADV (M5Stack)

I made a CC1101 for my Cardputer ADV following Ray J's tutorial on YouTube and decided to design a case for it. Here's the tutorial on how to make the CC1101: Can be printed without supports. I believe the spacers I printed for the device…

Downloads
99
Likes
19
Rating
5
P
Printablesltomicek

TAPO C110 camera holder for Mini+

simple camera TAPO C110 holder for Prusa mini+

Downloads
99
Likes
13
Rating
5
P
PrintablesRoveSoul

EC11 knob 旋转编码器旋钮

3款编码器旋钮,2个带指针,1个不带

Downloads
95
Likes
6
Rating
0
P
PrintablesRazorsnake706

Halterung TAPO C110 Single Part

I had problems getting the inner ring to fit, and I didn't really understand the point of it, so I got rid of it. I also made it into 1 part, so it would no longer require glueing together/assembly. I did include the inner ring in case…

Downloads
91
Likes
7
Rating
0
P

CC1101 and D1 Mini Case

Case for the D1 mini clone and CC1101 with "rubber duck" antenna. Based on @RobinsBlog_de design, but I wasnt happy with a few things, such as the weird bottom and the hole on top not made for the rubber duck antenna. Using this to…

Downloads
91
Likes
6
Rating
0
P
PrintablesElmardus

Flashlight GoPro clip for Wurkkos FC11

This clip can be used to hold a Wurkkos FC11 flashlight, and is intended to interface with a GoPro clip mount. I printed it in PETG for extra strenght and impact resistance, but PLA should be fine too. Optionally supports can be used to…

Downloads
91
Likes
9
Rating
0
P
Printablesr met

TP-Link Tapo C100/C110 mount

This remix ensures a good attachment of the camera to the frame of a Sovol SV06.

Downloads
90
Likes
11
Rating
0
P
PrintablesTaro Hayashi

EC11 Rotary encoder knob and cover

Covers and knobs for EC11. Knobs are compatible with half shafts.

Downloads
89
Likes
10
Rating
5
P
PrintablesFilcuk

Glass Mount Bracket for Tapo C100/C110

A bracket to stick a Tapo C100/C110 to a window (looking ‘outwards’). It uses a single clip to snap the camera in, making it easily removable. I have tested this, and it holds up fine for the occasional removal, even though the layer…

Downloads
89
Likes
9
Rating
0
P
PrintablesKingfisher RC

Tamiya Group C C11 Chassis Guard

This is a chassis guard to protect the chassis bathtub from collision against rocks, pebbles, kerbs and so on. This is particularly an issue when the front assembly is mounted in the highest (and default) position. This part fits right in…

Downloads
86
Likes
5
Rating
0
P
PrintablesHejSmart

ESP-32 + CC1101 - water consumption

Płytka ESP32 DevKit: Polecam wersję z portem USB-C dla wygody. Uwaga: Jeśli masz stare układy ESP8266, w tym projekcie ich nie użyjemy – nowa wersja komponentu wymaga ESP32, który jest szybszy i w pełni wspierany. Moduł CC1101 (868 MHz):…

Downloads
84
Likes
5
Rating
0
P
PrintablesIgor R.

1.3'' OLED EC11 Display with Encoder and Buttons Front Plate

It pairs nicely with the breadboard mount https://www.printables.com/model/1574339-breadboard-mount-for-13-oled-display-with-ec11-enc

Downloads
84
Likes
8
Rating
0
P
Printablesmarkp

Ender V3 SE Tapo C110 Camera Mount

I wanted to mount my camera on to the printer itself. This plate fixes in to a threaded hole on the z-axis base on the right side of the printer. Mounting plate can be printed “upside down” without supports. The ball-joint socket is a…

Downloads
81
Likes
15
Rating
0
P
Printablesciubecca

FLSUN SR ( Super Racer ) Cam Holder for TP-Link TAPO C100/C110

TP-Link Tapo C100/C110 holder for FLSUN Super Racer with adjustable arm Requires 3x 20mm M5 screws and nuts Instructions: choose Left or Right holder Print 2x 55mm arms 3x/4x cable holders 1x other components

Downloads
80
Likes
11
Rating
5

IKEA Skadis Tapo C110 camera mount

This is D-Link Tapo C110 camera holder for IKEA Skadis pegboard. Prints without supports. You have to remove the stock camera baseplate and just snap it in the holder. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it…

Downloads
80
Likes
12
Rating
0
P
PrintablesChmo

tembed cc1101

крыша tembed Магниты 8Х2 ММ Добавил пару отверстий для выключателя по запросам, если что то не совпадает пишите в коменты Я не тестил крышку с выключателем Если вам не подходит сторона выключателя B просто отзеркальте модель , она…

Downloads
79
Likes
15
Rating
0
P
PrintablesEmilio Fab

Brake Bias Knob for CTS288 and PEC11H

There is 2 design one for the CTS 288 encoder with a 0.250-inch shaft and one for PEC11H encoder with a 6mm shaft . I've created two models: A 2-part version for single-color printers , which includes the knob and a cap to be glued into…

Downloads
79
Likes
4
Rating
0
P
PrintablesSmonstrDesign

Tapo C100 C110 Case Mount

Hey, I designed this simple mount to have a nice top view. There is no reflection in the picture due to the contact. There is a small indentation at the bottom for an adhesive strip to attach the mount. Tapo Holder for the slim Case:…

Downloads
79
Likes
12
Rating
0
P
PrintablesBazzar701

Tiny Mercedes C111 - Mini Cars Series

Mercedes C111, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…

Downloads
74
Likes
22
Rating
0
P
PrintablesMaxime

TP-Link Tapo C100 / C110 Camera mount for Prusa Core One

Hey Makers ! Looking for an easy and affordable way to mount a plug-and-play camera on your Prusa Core One? If, like me, you're not yet comfortable with ESP32, OctoPrint, and other advanced setups, I’ve got a simple solution for you!…

Downloads
73
Likes
25
Rating
5
P
Printablesdonutcat

EC11 Rotary Encoder Knob - Rotor

Live your best dorito life, from the keyboard to the printer. Dshaft and knurled shaft versions, intentionally a smidge loose for easy fitment. Should print fine at most settings, only needs enough perimeters/infill to make the surfaces…

Downloads
72
Likes
9
Rating
5
P
PrintablesjBoards

EC11 Knob

default specs: height: 2cm

Downloads
72
Likes
3
Rating
5
P
PrintablesGreySiD

Bambu lab P1/X1 Magnetic mount for IP camera TAPO C100/C110

BOM: 2 magnit 10*2 9V 0.6A USB Adapter https://aliexpress.ru/item/4001081594055.html?sku_id=10000014234470396

Downloads
72
Likes
13
Rating
0
P
PrintablesOle

LILYGO T-Embed CC1101 Plus GPS Addon

Full description and BOM on my GitHub: https://github.com/olekrause/t-embed-cc1101-plus-GPS-Addon This project adds an ATGM336H module to the LILYGO T-Embed CC1101 Plus Printing suggestions: - Print in PETG - Auto orient the model -…

Downloads
71
Likes
7
Rating
0
P
Printablesdavidarroyo1234

LilyGo T-Embed CC1101 external antennas and switch 6x3mm magnet

Remix of the original “LILYGO T-Embed CC1101 back shell with external antennas” by dansh with 6x3 magnets

Downloads
70
Likes
12
Rating
0