314 models
This is my rendition of a 2-Gang Surface Mount Box for Decora Remote Controls specifically for the DBX ZC8 controls, might fit ZC9 as well. I recommend you do not use a boot in the RJ45 as there is limited space and keep the daisy chain…
Print approx. €11.09–€13.56 excl. taxPreliminary estimate for PETGSource material: PET
For some reason, MFG of this Omron Air Compressor Model NE-C801 made a mount for the inlet cup that doesnt actually work! So I used this existing mount edge to make my own mount! And added a little tube holder since I dont want my…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
So you can tow your big trailers with your sick rigs!
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Corvette C8 Wall Art Easy to print for up to 100 cm length on Prusa MK3/4 bed size. Of course you can scale it the size you want. I recomend a strength of about 2-3mm. Add some double-sided tape and stick it on the wall. Invisible and…
Tri-Bahtinov masks help to achieve a very precise collimation and focus on telescopes. I have designed this mask to fit on Celestron C8 and EDGE HD SCTs. General information about Tri-Bahtinov masks can be found here:…
Chevrolet Corvette C8 2020 Modèle de voiture imprimable en 3D, tout comme le vrai. La Chevrolet Corvette C8 est la huitième génération de la Corvette voiture de sport fabriquée par le constructeur automobile américain Chevrolet. La Chevy…
This model is based on the original model by LutraVulgaris (@Otter) for the classic (GC8) Subaru Impreza with the Subaru logo visible when you look from the top of the model! (Go check out the other awesome car silhouette models by…
Here is a 2020-Present C8 Corvette logo with multi-layer-height colors. No MMU needed! Open the provided .3MF file for a pre-sliced and colored version, or use the provided STL and slice it how you like.
This set of two gridfinity is perfect to store you crimping tool kit. The first bin is for the HSC8 plier. It's 3x5x4U The second bin is to store the ferrules, it's 3x5x5U. See my other gridfinity bins at…
It's a 2020 Chevrolet Corvette. You can drive it and it has lego duplo clips on the seats.
Project from https://www.thingiverse.com/thing:3121121 I was thrilled to find that someone had already made a wall mounting bracket for the ASUS RT-AC68U, as I thought this would fit my new ASUS RT-AC86U router! It turns it the two…
This C8 STL is 5 foot in length but can be scaled down to about 20% to fit on a single build plate (shown).
A tri-bahtinov mask with hinges to be foldable and use less space. The Mask is designed for celestron C8 (and tested on a vintage one). I've created 3 versions: 1 for the C8 with the secondary mirror holder of 66mm of diameter (tested on…
FMS FCX18 Toyota Land Cruiser 80 inner fenders with side steps. Print with tree supports due to the side step/rock slide part of the inner fender. Two screws are already present on the chassis to mount the inner fenders. The inner fenders…
Gridfinity compliant, low-profile tray/holder for the IWISS/iCrimp HSC8 ferrule crimping tool. The one show in the picture is a knock-off brand but it has the same physical size as the original. Please note that some brands of HSC8 type…
I re-upload the model from Thingiverse as I've used it for my server rack based enclosure for the MK4, and it does its job very well. Full credits to the original author. Summary Deutsch siehe unten :) This is a housing for using…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
I have not printed this so I'm not sure of the fitment. Used a 3D FJ80 model to build around it. The mounting holes are 3mm in diameter and 43mm center to center. The front D-Ring mounts are also 3mm holes. Behind the stinger is a…
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains
https://www.aliexpress.com/item/1005005986842547.html
This model took a lot of time and patience to complete every single piece and was meticulously designed to fit together properly. Depending on the type of filament and 3D printer you use, some sizes may need slight adjustments for the…
simple box for aliexpress module QC4.0 QC3.0 Type-C USB PD65W standard bare wire version
Gridfinity bin for the IWISS HSC8 family crimping tools. Size is 5 x 2 units and 4 units high. IWISS makes crimping tools HSC8 6-4 HSC8 6-6 HSC8 16-4 HSC8 16-6 of the same form factor, they should all fit (not tested though). I included a…
For those looking to eliminate noise from the SC846 chassis, this model replaces the entire OEM fan wall assembly with an alternative design that uses quieter hot swappable 120mm fans.
SC846 ATX PSU Mount For those of us who have removed the rackmount PSU that comes with the Supermicro SC846 chassis and replaced it with an standard ATX PSU for quieter operation, the ATX PSU is usually left to just rest inside the case.…
A wall mount to the suit the Shimano EC8004 charger for the EP8 drive systems. This includes a small mount to neatly store the cable when not plugged in. It suits the chargers with the right angled plugs and has a cut out to easily slide…
Wall mount your JC8012P4A1C panel in style with this bracket! Avoid cutting into your wall to get that flush mount. Two versions are included: a landscape and a portrait bracket. A small hole is placed at the bottom right of the mount to…
LEGO Chevrolet Corvette C8
Summary Ultrasonic vinyl record cleaner: For cleaning 33 rpm vinyl records in a 6L ultrasonic cleaner tank.…
As requested and test printed by u/weeb-splat .
The stepfile is only the left side. Just mirror the side for the other. printed without support.
A holding plate for the ch2i ic880a boards https://github.com/ch2i/iC880A-Raspberry-PI that form a nice LoRAWAN gateway. You will need standoffs and screws to mount the PCB to the plate. The design has holes for optimized airflow through…
A super cool replica of the Corvette c8 Stingray
A simple case for the Kincon KC868-A6, Includes Case Base Case Top Display Spacer Requires M3x5x4.5 inserts
Grill insert for Subaru grill retainer, fitment confirmed on GC8 Impreza WRX. Compatible with this part: https://www.rs25.com/threads/3d-printed-grill-clips.222791/ Picture for fitment demonstration, not better picture available at this…
This is my Corvette C8 Lightbox with stand and what I used to assemble it. Bambu Labs P1S/AMS .04 Nozzle 10% Gyroid Infill Filaments used for this project: Elegoo PLA - White Elegoo PLA - Black Elegoo PLA - Yellow Overture PLA - Fresh Red…
This set of radius block allows you to attach a narrow dovetail bar (i.e. Vixen / CG-5) to the Losmandy attachment points on a Celestron C8. This is useful when you wish to (1) attach your C8 to your mount using a Vixen bar, AND (2)…
HDD Blank for covering empty bays for SC846 chassis for improving airflow across populated HDDs.
I have not printed this so I'm not sure of the fitment. Used a 3D FJ80 model to build around it. The mounting holes are 3mm in diameter and 43mm center to center. The D-Ring mounts are also 3mm holes. There is a 6.2mm W x 6mm H hole for a…
This holder is a friction fit to hold an XTAR VC8 lithium battery charger on a wall, or similar. It attaches with number 8 flat head wood screws. The model should be relatively easy to adapt for another screw size if that's necessary. It…
I liked the original design but it does not fit my Archer C6 V3.2 router so I designed this from scratch. This design should fit the A6 and probably C80 as well since they look identical to the my C6 V3.2. Check the photos for reference.…
Door Trim Cap for Subaru Impreza GC7 and GC8, based on the 94222FA120ND item.
Hi all, having the problem, that the 10m cable coming with the ZTE889 is not long enough and cannot be replaced, I created my own cover to add a my own cable. This needs to be used together with a cable gland, so you can seal any round…
SCH846 Rear Fan Bracket & Caddy Low-profile fan bracket to hold the fan caddy for Supermicro SC846 chassis. These low-profile brackets provide clearance to use the complete ATX PSU Mount along with the accompanying shroud for closing off…
This is a super simple adapter plate that mimics the one that comes with the Hobbywing EZRUN WP SC8 ESC. The original plate allows the ESC to be mounted into a Traxxas car like a Slash, Rustler, etc. This plate serves exactly the same…
Es gibt 2 Versionen: mit seitlicher Halterung und ohne seitliche Halterung. Aufrecht stehend drucken. Printer: Ender 3 /Prusa Mks3+ Nozzle: 0.4 Layer: 0.3 /0.2 No Support skirt
These models are modified from the original design of madewithrealtornados https://www.thingiverse.com/thing:6166809 Files included are the 3 bolt mount for both sides. Modified from the original 2 bolt mount. Be aware that you must use…
This is a IEC 60320 C7 / C8 type appliance coupler protection or dust cover. It is used to protect the inlet plug of power supplies or battery chargers. I use it to protect my camera and DJI mavic pro drone power supplies when travelling.…
Wall-mountable enclosure for the ESP32 six-relay module Kincony K868-A6. A model is included to facilitate further modification. No printing supports needed. Some walls are thinned - they are translucent. Alternatively, they can be easily…
In my Supermicro SC846, I have the BPN-SAS2-846EL1 backplane with SAS expanders. This means that all the drives in the 24 bay must be connected through my HBA. If you're running a hypervisor, such as Proxmox, you may want your hypervisor…
this is a dove tail support for vintage celestron C8, to enable easy and fast finder connection and exchange. a M4 bolt (both screw and nut) is needed as it fixes the finder. I suggest to print it in PETG or ABS (I use PLA only for home…
This is a battery extension box for the RadioLink RC8X RC transmitter. This extension allows you to use more widely available rechargeable batteries, like the 2 cell battery packs that use the 18650 cell type batteries. Those battery…
FLY-C8 motherboard bracket, fixed to the electrical guide rail using the previous version of Voron's method. Stepper Driver Fan Duct FLY-C8 Stepper Driver Fan Duct 5015 / 驱动散热 by 杰 徐 | Download free STL model | Printables.com
FLY-C8 is a cheap 3D printing motherboard with a host computer. Printing does not require support, only a small part of the bridge needs to be printed. You need a 5015 fan, 3*M3*40 SHCS, 2*M3*20 BHCS and two M3 nuts . Also, those who need…
This is a remix of guppyk’s very awesome V4.0 Back Horn Speakers specifically for the Dayton Audio PC83-4 driver. Basically rescaled (109.45%) to match mounting holes and added squared notches to the mount to match the DA PC83-4 (filling…
It is an enclosure meant to protect the board from unexpected shorts and make it easier to work with. It is designed to allow access from the top so that the screw terminals can be tightened. You can check out the completed assembly below.
Mount for the Annke C800 Dome Camera.
Das sind STL Dateien zur Fernbedienung aus dem Homematic Programm. Beide Varianten, teilweise mit Text... Muss man sehen was für einen passt.. ❤Lasst gerne ein Like da ! Da freut sich der Bastler!✌😉 Jeweils mit 2 Befestigungslöcher 4mm an…
Simple PC817 2 Channels OptoCoupler Enclosure. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0.2 Filament: OVERTURE PLA Category: Electronics
This is my updated version of the Underbody Deflector for the C8 Corvettes. Set the infill to 75% to 80% for stiffer ears and used tree supports. Removed the cross section and fins to allow more air flow. Hope this helps some of you.…
LEGO Alfa Romeo C8 Cabrio
https://www.reddit.com/r/flashlight/comments/1nbjtfp/c8_sft25r_beans_modded_with_a_fresnel/
This Corvette c8 Silhouette wall art will give your office, room or garage a unique look that will catch attention to any racing, car enthusiast and will add a subtile touch to your home design. This could be a unique gift to every…
I really liked the model by @Gypo_282797 and asked him for model files, but i never heard back - so I created my own version. Rather than to use magnets and scratch the metal tray, I suggest using double sided tape. This version was made…
Umbrella hook for luggage compartment Citroen C8, Peugeot 807, Fiat Ulyse Háček na deštník do zavazadlového prostoru Citroen C8, Peugeot 807, Fiat Ulyse Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: No…
A small cable management attachment to tie cables to. This utilizes the screws where the fork normally connects to. The ribs are printed separately, and fit snuggly into the square pegs. I do recommend a small dab of super glue to prevent…
Tri-Bahtinov Mask for C8 and Edge HD 8 Hyperstar with cooled ZWO/OGMA/Touptek 80mm diameter camera This Tri-bahtinov mask will fit C8 or Edge HD8 in the Hyperstar configuration with out having to remove the camera. outer diameter is 203mm…
Ce model est une silhouette de corvette c8 de 26 cm long ,6 cm de largeur et de 3mm d'epaisseur
General Description: This body is a gigantic pile of smooth plastic. It needs some refinement. To mount the body on an HPI Venture there are also body mounts available here on my Printables Site. L and R mean left and right. Most parts…
GitHub - CaiJonas/DeLonghi-Dedica-EC885-EC685-modification Case for my first arduino project.
It fits perfectly, so ensure the tray is aligned and push it down vertically.
Prints without supports, ABS or similar filament recommended. Print with 3+ perimeters,
2024/01/12 - Update. The resin printed part became brittle and unfortunately broke after almost a year of use. Perhaps a ‘thicker’ version or different resin would hold up longer. 2023/01/28 Replacement brackets to hold heater instrument…
A segmented Dew Shield for the Celestron C8. Can be printed on smaller printers. You will need to print 4 segments and glue them together. A segment with a cutout for a Dovetail Bar is also included. You may or may not want to use it…
Simple trailer hitch that fits the standard rear bar on the FMS fcx18 Lc80. A 5mm ball joint fits snug over the ball.
Narrower wheel wells and lower rear shock keys for V2 body. You will have to reroute the wiring for the rear lights. The rock sliders are from here: https://www.thingiverse.com/thing:7247724 Edit: I updated the rear shock keys with the…
I wanted to upgrade my LM8UU to IGUS Drylin. First attempt was to just swap LM8UU in the existing aluminium SC8UU by IGUS Drylin RJ4JP-01-08. Result was a lot of bearing clearance. According to datasheet, the IGUS drylin bearings need to…
this model of a modded corvette stingray is based on one i have in nfs unbound.
A unique touch to add to your desk - a pen and pencil holder styled after the exhaust and exhaust surround of the C8 Corvette Z06. Dimensions are 90mm high x 79.3mm deep x ~172mm wide.
Print 2 hooks. Print the router mount with supports. Assemble. Mount. Easy. 0.3mm layer height is good enough.
EN VW Golf - Polo - Passat AUDI A3 - A4 - A6 - Q3 -Q5 - TT Windscreen mirror wire protection - cover - cap 3C8857593B The provided .Step file allow you to modify the length of your cover to perfect fit to your car, as your broken part is.…
FMS FCX18/FCX24 Wall Mount – Because Your Floor Isn’t a Garage Sick of tripping over your crawler and transmitter? Hang that beast on the wall like the trophy it is. This simple 3D print keeps your RC life tidy and your significant other…
3 part wall mount for the Asus RT-AC88U router. Flat to the wall. design, not table top style. Fusion files and print files in the download section.
20180421: added new STL with "assembled" extrusion version. I didn't find any other cap that fits my 30x30 extrusions, so I made one :). Print Settings Printer Brand: Creality Printer: CR-10 Mini Rafts: No Supports: No Resolution: 0.2…
This is a Gridfinity-compatible holder specifically designed for the HSC8 6-6A crimping tool. The download includes two versions: One with an ejection hole at the bottom for easier tool removal. One without the ejection hole , for a…
Hook for luggage compartment Citroen C8, Peugeot 807, Fiat Ulyse Háček do zavazadlového prostoru Citroen C8, Peugeot 807, Fiat Ulyse Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: YES Resolution: 0.2…
This mask is designed to easy fit the standard C8 sct. the central diameter is 72 mm and gives some slack for easy fit and removal during cold nights. The other masks Ive found has an outer diameter the same as the aperature. This means…
I needed a new lens dust cap for my 2000s Celestron 8. I added a ring dew heater and the cap no longer fit. This was not surprising due to the ring being designed for a different version of the C8. I added a small inlay in the cap for…
FLY-C8 Motherboard supports and brackets for DIN rail. Print with Voron standards: infill 40%, layer height 0.2mm, 4 walls and 5 solid top/bottom layers. Requires 4 M3x6 screws to assemble the supports to the brackets and 4 M3 screws to…
Multicolor, single part coaster with the C8 Corvette logo. Color changes are handled by swapping filament colors at specific layers. Original model is 133 mm dia. but can resize to 100 mm dia. if it is too large for your taste. OBJ and…
Case and Mount Assembly for CNC85x115 PV Panel (STAR SOLAR) This case and mounting system is designed to securely house the STAR SOLAR CNC85x115 PV panel and integrate it with a camera-mount-compatible bracket. The assembly is optimized…
DIN rail mount for chinese dual PC817 optocoupler board (17mm / 1 part unit width) PCB has common ground on inputs, outputs may be grounded via jumpers. If you are looking for a board without any connections between both optocouplers,…
This is a remix of a PC817 optocoupler mount designed to be used in control boxes or 3D printer electronics enclosures. The original model required a separate DIN rail clip. This remix integrates the DIN rail mount directly into the part,…
Split Tri Bahtinov Mask for Celestron C8 or EdgeHD 8. Use 4mm neodymium magnets so that the two halves magically join in front of the corrector plate. I also have modeled a rotatable shade so that you can adjust one set of Hyperstar…
Grip Ring for Sofirn C8L Flashlight
A small print to cover the C88 moderator adapter. Install heat set insert in top. Requires an 8mm m3 screw to secure. Do not over tighten!
Print on side for optimal strength and filament usage Need to do more testing with different materials and infill % to determine best strength/weight v.s stock injection molded piece. Verified fitment on MR-03 Chassis, please let me know…
This is an accessory mount for a Celestron C8 telescope that provides a standard 1/4 20 screw to attach a spotting scope. I designed it to mount my 3D printed 80mm f/4 refractor to my C8 telescope. It requires: one tripod screw - to…
I needed an adjustable bearing block so i modified JoesTinman's design. This design is compatible with SC8UU bearing blocks. Printing: Print with 3 Perimeters & solid infill threshold: 15mm^2 There are two versions of this design, sc8uu…
