8,329 models
This design is my attempt at creating the ultimate 3D Printable BOTW Master Sword. This Master Sword was meticulously designed in Fusion 360 so that all parts can be printed without support material, and the final piece can be assembled…
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for one variant
I recently watched Game of Thrones and it inspired me to create such a designe - we hope you like it! Looks great in modern interiors, fits all plants well. Best to print in 2 or 3 layered vase mode settings. Works with most filaments.…
Print approx. €2.47–€3.01 excl. taxPreliminary estimate for one variant
Poseable hands for Dummy13. You will need the fingers from Alioth's poseable Lucky 13 hands. They are currently scaled for 500%, but should function down to about 200% (40% of this model size) scale if your printer is dialed in. If you're…
Print approx. €0.59–€0.73 excl. taxPreliminary estimate for one variant
It's been exactly 5 months since I published my first 3D print design. Back in August, I uploaded my design for a fully 3D printed Master Sword from The Legend of Zelda: Breath of the Wild. I had been working on that design on and off for…
Print approx. €42.13–€51.49 excl. taxPreliminary estimate for one variant
*** Assembly Videos At bottom of this page*** Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
This is latest model I have created. This detailed AT-AT from Star Wars has 15 points of articulation and show cases the interior of the machine. It consists of almost 70 parts and can be assembled without glue. The head and body had a M5…
Print approx. €10.02–€12.24 excl. taxPreliminary estimate for one variant
This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
Train station model created in Fusion 360 from a project foundable on http://www.smpd.cz/olympia/projekt.html Print instructions For easy printing, model is sliced to 4 parts which can be easily glued together.
Print approx. €15.76–€19.26 excl. taxPreliminary estimate for one variant
November 3, 2026 Added a main cabin without hatch (RED folder) June 18, 2024 Added a main cabin that is open at the back and a step file of the section in order to allow for an easier design of a double cabin. The added part should be…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
📝 Description The Ruler Stop S is a compact and precise stop designed for 0.5 × 15 mm rulers , ideal for workshop use, model making, and DIY applications. To make it максимально flexible, the model is available in four versions (M3, M4,…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
Summary Get more than two dozens multicolor traffic cones in one print - or print them single. They also fit the 1:24 car models I have published. Sizes 1:18 = 30.5mm height 1:24 = 22.8mm height Print Print in 0.2mm layer height. No…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Shout out to 80sNerdBomb for the model. The Vertical version is much better . Thread support works well and comes out easily. Images in makes. I printed it in Prusament My Silverness PLA and Mystic Brown PLA.
Print approx. €3.60–€4.39 excl. taxPreliminary estimate for one variant
UPDATED 2022-10-14: Many improvements, detailed at the end. TL;DR: New features, more spool models, improvements in printability, adapted to Recymbol 1.1. We all know that spools spin faster at the end, and slower when they're the fullest…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
1/100 Scale MG Gunpla Model Base. No Assembly Needed.
Print approx. €4.75–€5.81 excl. taxPreliminary estimate for one variant
Decided to add the 3MF for the popular robot hand model by Make-a-print to make printing easier in different colours. Files have been separated according to the original design colours. Two folders of files are available, one for the full…
Print approx. €1.37–€1.67 excl. taxPreliminary estimate for one variant
I'm a huge fan of Star Wars and the Droids from that universe. Unfortunately, I don't have enough space for full sized models, but I do have a couple of free shelves that I have slowly been filling up with Droids and Robots from various…
Print approx. €3.03–€3.70 excl. taxPreliminary estimate for one variant
All my designs are free to download, but if you like my work please consider to buy me a coffee =) Ferguson TE20 - Fully printable kit - scale 1/18 EDIT: Since the Ferguson TE20 sometimes have the headlights mounted on the sides of the…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Please consider pressing the like button above.⬆ and downloading the files. It really helps me out with these projects. Thank you. 😊 Hi, I’m Lewis and this is DIY Machines. The channel where I show you step-by-step how to make awesome…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
A vase & planter set with a scaly motif reminiscent of fish scales , this model was build to explore how we could implement some relatively deep pattern into Vase Mode print. Printing Both model should be printed using the following…
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant
N scale oil barrel for model train use decor
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
N-Scale 12" diameter hollow pipe load. Actual print size is 17.2mm x 17.2mm x 96mm, which scales out to 9'H x 9'W x 50'L. Print instructions The hollow, thin-walled pipes were designed for a 0.25mm nozzle and 0.10mm layer heights.
Print approx. €2.96–€3.62 excl. taxPreliminary estimate for one variant
Burj Khalifa , the tallest building in the world, 1:1000 scale model There are several 3D models of this building on the Internet, I printed one myself as a gift for my cousin, who was in Dubai and saw this skyscraper. I am fascinated by…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Passionate about aeronautics, I drew this model because it is one of my favourites plane. Designed in several parts, this model can be printed without difficulty and with very few supports. With this model I introduce a new assembly…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Here is my own interpretation of the razorback form The Expanse. The model is design at 1:30 and mesure around 67 centimeter height but designed to be undersized until 34 % size without issues (1:90 scale - 23 cm height). It can be…
Print approx. €2.21–€2.70 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Work in progress Use 6=9 Nozzle: 0.4 Layer: 0.2-0.24mm (Recommended) No Supports needed No Brim needed Scale it as you like :)
Print approx. €9.33–€11.41 excl. taxPreliminary estimate for one variant
Have you ever wanted to find out the size of something, but instead of using pesky units like inches or centimeters, you wanted to use something much more REAL? Well, then this is the measurement tool for you! This International Standard…
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
The model is not optimally adapted for 3D printing, so some experimentation will be necessary. If you like the model, I'd love to hear your feedback! You can rate it, leave a comment, share suggestions or questions, and best of all—post a…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Update 2: 8/2/2022: Success! I no longer consider this effort a work in progress. This design can really work great once you get it assembled and know what to do to get it running excellent. It is very satisfying to watch it start itself…
Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant
---- Update 15 03 2022 I had downloaded the wrong file (opens pot - part1.stl). It was not the final version and it was not functional (thanks JB for picture). I just put the right stl file. (the Gcode was correct) ---- Hello, Here is a…
Print approx. €0.45–€0.56 excl. taxPreliminary estimate for one variant
The second version of the stand for painting models with hinged holders and larger locking wheels. M3 nuts and screws Bearing 608
Print approx. €1.41–€1.72 excl. taxPreliminary estimate for PETGSource material: PET
Dieses Fahrrad im Maßstab 1:8 habe ich entworfen um erstens ein schönes Modell zu drucken und zweitens um einmal auszutesten wie fein und genau ich mit meinem Prusa Mini im nahezu Originalzustand drucken kann. Herausgekommen ist ein…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Passionate about aeronautics and Civil UAV pilot, it was for me unthinkable to modelize planes without this one I particularly appreciate with his design inspired by B2. Designed in several parts, this model can be printed without…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
The model is inspired by modern real-world Jersey barriers and focuses on clean geometry, realistic proportions and easy integration into different layouts. The barrier is modular , allowing you to print and place multiple segments side…
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
Copy of Lego cup (Item No: 3899 ) based on my own measurements. Best use as pencil holder (note: it cannot hold water). Be careful if you want to scale down the model. The tolerances for the couplings may be too small. Assembly video…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This part is used to adjust and secure scale indicator of Dewalt DWE7492 table saw and avoid plastic distortion of original indicator when securing screws Remix from https://www.thingiverse.com/thing:4602164 Part has been redesigned to…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
This STONE APARTMENT BUILDING is printed as a single unit. It will take 11+ hours to print, but the wait is a very satisfying model for your layout. It is printed with Prusament PLA. Print the main structure in the color filament that…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Rose and love earrings Object scaled from the original (you can see it from the dimensions) Dimensions: 50x16,16x2mm
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Rc 1:10 scale triangular roof tent. Střešní trojúhelníkoví stan. Stan se otevírá na kloubu s použitím M3 šroubu, v zavřeném stavu ho drží magnet. Při dotahování pantu nechte šroub volný a nedotahujte ho jinak praskne pant.. Rozměry:…
Print approx. €5.57–€6.81 excl. taxPreliminary estimate for one variant
I prefer printing from g-code because the stl might ruin the sizes. Just check it.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Just a fun model created in Fusion 360 - see if your printer is accurate enough to print a ruler! Printing Instructions Make sure to enable ‘Detect thin walls’ in the print settings. Add layer changes to print the ticks and numbers in…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
Build Your Own Alpine Model Railway Station A G-Scale Tribute to Davos Wiesen Bring a piece of Swiss mountain charm to your layout with this detailed G-scale (LGB, 1:22.5) model railway station. Inspired by the iconic Davos Wiesen station…
Print approx. €3.89–€4.75 excl. taxPreliminary estimate for one variant
The last time I played Wyrmspan with friends, we ran out of eggs near the end of the game and had to scramble to use substitutes. (I'm not good with the multiplier tokens) So I decided to create a simple 3d printable one similar to those…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
Original .STL on Thingiverse by A_Sterling. Enlarged 200% for my wife as an Easter gift. This was the very first overnight print on my i3 MK3s kit, and it came out beautifully in gold generic PLA. It was a very good test for rapid Y-axis…
Print approx. €8.83–€10.79 excl. taxPreliminary estimate for one variant
V2 is updated to include 10Lb and 5Lb weights, a chamfered edge to make it easier to tell edge to edge plates apart, improved fit tolerances, and a bar with integrated gripping hands. Per izkariot_438646 's suggestion, I've also added a…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for one variant
This desk organizer includes a clock, calendar, pen holder, and compartments for paper clips and small notepads. Notepads with a size of 90 mm x 90 mm can be inserted. Instead of a calendar, a nice picture could also be used, for example.…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
13/10/2025: Added 1 part body stl & print file 25/01/2025: The version with 4 spinning wheels can be found here . 18/12/2024: I have released the 1:12 RC chassis. 04/11/2024: I have now released a bigger 1:12 version…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
I scaled the original model by jarvizar up so more details are visible, fixed the STL a bit and added the water layer as a base. So you either need at least a dual extruder printer or a filament change in the print. Works with A4 sized…
Print approx. €23.42–€28.63 excl. taxPreliminary estimate for one variant
Europalette / Euro pallet Maßstab: 1:14,5 / Scale: 1:14.5
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant
Passionate about aeronautics, it was for me unthinkable to modelize planes without this one. Designed in several parts, this model can be printed without difficulty and with very few supports. This model is designed with the double slide…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
Downscaled to Z scale. Tractor details were reinforced so could be printed at this scale. Trailer was designed mainly from photos and actual fuel trucks specs.
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
NOTICE: I realized after uploading that this needs to be flipped to have the GAU-8 on the correct (left) side. Remixed from MutherFluffer @MutherFluffr_3251745 design. https://www.printables.com/model/1309217-a-10-thunderbolt-ii also…
Print approx. €7.25–€8.86 excl. taxPreliminary estimate for one variant
sturdy little 3-level diecast car display. Holds 6 cars total. also holds 15 lego minifigures with their stands perfectly can be used to display other things like spray bottles for your airbrush or mini utensils and screws etc…
Print approx. €5.64–€6.89 excl. taxPreliminary estimate for one variant
FilaMan Revamped This is my version of a scale for the FilaMan project. Its an NFC powered automatic scale for Spoolman . I was going for a clean elegant look, hiding as much of the electronics and cables as possible. Please check the…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I printed this model at 198% size for a 1:4 scale model of a Miles M.2H Hawk Major R/C flying model. I needed a block underneath it with two holes for M3 bolts, so I used the Prusa Slicer to add this feature. I printed with 10% fill to…
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
This model has a lot of detail and will look really good on your layout. the measurements are in scale for N scale layouts 2.5x4in Have fun printing and would love to see pictures of it on your layout!
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for one variant
Designed in several parts, this model can be printed without difficulties and with reduced supports. The canopy being designed separately from the main model, it will be easy to print it in a different color. I tried to simplify the 3D…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Lamp shade for E27 lamp socket. Please only use with LED light. For the opening, a negative volume was inserted in the lampshade in Prusa Slicer (generic cylinder, D=40mm), please see 3mf-file.
Print approx. €3.49–€4.27 excl. taxPreliminary estimate for PETGSource material: PET
just a fun gift for mechanics, car guys or anyone who would like it. I have made them for people, and they love them. It does need supports and they can be a bit of a pain, but overall, I love it.
Print approx. €3.66–€4.48 excl. taxPreliminary estimate for one variant
These wheel chocks will stop your Hot Wheels 1:43 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! HW Chocks-ChockA_43 is easier to print and comes off the build plate…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Recommendation print it with 0.1 mm layer height print the palette and the mainBody in one piece and do color change print the text separate and glue it on it doesn't matter on material
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
A small 1:10 tool box for workshops, as a decoration for crawlers or similar. Be careful when assembling, do not tighten the screws too tightly, otherwise the bars on the lid and hinges may break. The last picture shows where which screws…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
this is an inspired toy from LEGO super heroes batmobil tumbler, enlarged two and a half.
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
Overview This is a sturdy double-sided shower hook. Great for towels, wash cloths, etc. if you don't have a towel bar nearby. I designed this to fit my shower which has a width of just under 1". I designed the hook to be non-slip by…
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
Created from a GIS downloaded model and scaled down for 3D print
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Originally made to fill the Cowling of a 1/12 scale Grumman Goose. Provides a mounting for the Racestar A2212 1400 motor with a spinner setup that is a press fit on the Propeller Adapter (Collet Type) and fitts hard against the motor…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Cable box holder 160x62mm for Ikea skadis or similar. If you need it in a different size you can always try to scale the model without hooks and add the hooks later. The brand of cables I use:…
Print approx. €3.09–€3.78 excl. taxPreliminary estimate for one variant
Spielende Personen / Playing People als 1:10 Verkehrsschild. Die Rohre einfach auf der Rückseite aufkleben! Druckeinstellungen: Düse 0.4 Schichthöhe 0.1 Material: PLA schwarz blau weiß Farbwechsel bei: 0.6mm 2.1mm viel Spaß dabei!!! Edit…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
This is a remixed version of M. Bergman's very nice Comet tank model. In order to more easily print it on my Mk4, I split the model into several pieces, and arranged them in a way that I thought appropriate. I also re-scaled it to HO…
Print approx. €1.49–€1.83 excl. taxPreliminary estimate for one variant
As with my other 6 mm scale miniatures I am trying to challenge what is possible with regular FDM printer (Prusa MK4 in my case). This over-weaponized mech is my original creation inspired by grimdark fishfolks and that mech wargame…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Gioco Musicale per bambini. Stampare n° 1 manico e n° 2 parti laterali. Ci sono 2 versioni di manico, una per i bambini sotto i 3 anni e uno normale. La versione per bambini impedisce di spingere il manico in profondità in bocca e i fori…
Print approx. €2.92–€3.57 excl. taxPreliminary estimate for one variant
All of the course sections were developed for my 1/30th scale Axial SCX30 Chevrolet K10 pickup but they are probably suitable for other 1/30th scale crawlers. This video shows the course being driven. Everything was designed using Fusion…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
A 1:500 scale model of a partial plan of Çatalhöyük, one of the first settlement in human history that can be defined as a city. The plan used as a base is a personal redrawing of Hrůza 2014's research. More informations about Çatalhöyük…
Print approx. €2.82–€3.45 excl. taxPreliminary estimate for one variant
Calendar stencil for notebooks or paper!
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for one variant
Print lids upright. Use a small drill bit if neccessary to clean out hingeholes.
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
The model only needs support on the load-bearing beam.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
Easy to print, no support required. This is a tool to put fish scales onto ceramic or clay, or to put a fish scale glaze pattern on fired clay. Can be used to apply paint to school art projects as well.
Print approx. €1.04–€1.28 excl. taxPreliminary estimate for PETGSource material: PET
See also my new version: https://www.printables.com/model/1140261-calendar-hook-wallhanger-kalenderbugel-2 Printed in PLA Part is slightly flexible and can be removed to flip the page. Designed in Onshape…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
This is a modified and split variation of a model originally by Liam over on Grabcad . While I don't think it was meant for printing, I immediately wanted a 600% scaled model of a USB A connector. BIG UPDATE 9/22/22 Please use the new…
Print approx. €6.35–€7.76 excl. taxPreliminary estimate for one variant
Number Scale to provide preschool and elementary school children with a basic understanding of quantities and simple equations. "Easy and quick to print. Requires minimal support. You should print the base on its side to ensure the…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Stand for Withings Body Cardio Scale and BODY+ (upright position) For reasons I needed an upright stand for my Withings Body Cardio (and BODY+) in the bathroom. With this stand I safely can stow the scale in an upright position when not…
Print approx. €7.95–€9.72 excl. taxPreliminary estimate for PETGSource material: PET
scales for scale mail
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
This is a scale replica of a cricket bat. Can be used in outdoor cricket games, although it will break if you use it with a real ball. Recommended use with plastic ball. Print with detail, and sanding and paint are recommended for a…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
The Month is a rhombic icosahedron and the Date is a rhombic triacontahedron. The six doubles as the 9.
Print approx. €2.67–€3.26 excl. taxPreliminary estimate for one variant
Anticipating holidays is half the fun, so why should Christmas get the only calendar countdown! Look no further because with this desk/mantle decoration you get to countdown the days until the spookiest holiday of the year :) With 31…
Print approx. €1.73–€2.11 excl. taxPreliminary estimate for PETGSource material: PET
Simple G-Scale buffer stop, designed for being easy to print (lying on the flat side), easy to mount (push through rail from below between sleepers) and to work well. Not intented to be a scale model of a real buffer stop.
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
H0 scale - 188 mm Platform complement (height) - thanks to phildc (3rails.com) To be glued on the previously published here (1222647) low concrete platforms No support needed Complement de 188 mm pour quai de voyageurs (hauteur) - merci à…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Malé vyprošťovací desky v měřítku 1:10. Velikost XL : 35x137 , průměr díry 3,2mm Možnost kombinování s kanystry. Možnost přidělání na zadní držák kanystrů.
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Malý nástěnný držák na Xiaomi Mi Scale váhu. Použito s šroubky M4 Hlavní díly je nutné tisknout 2x…
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for PETGSource material: PET
little gnome with hat, pants, nose, beard and eyes
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
you can modify height of the spacer in prusa slicer to adjust as your choice (in Z direction only after unlock the lock). With this design you can block from 2 to 30 mm space. Updated Version. vous pouvez modifier la hauteur de la…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
A scale model of Gran Canaria
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
I have some Scalextric models on a display shelf. I needed a display base that looks like tarmac. I printed this on a textured sheet.
Print approx. €1.75–€2.13 excl. taxPreliminary estimate for PETGSource material: PET
Free calibration grid for diode and CO2 laser engravers. Tests power (10–100%), speed (100–1000mm/s), line width (0.1–2mm), and greyscale fill in one 200×160mm sheet. HOW TO USE: 1. Open the SVG in LightBurn, xTool Creative Space, or…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
This model represents a realistic H0 scale parking bollard / car park barrier , designed for use on model railway layouts, urban scenes, parking areas, streets and dioramas . The shape and proportions are inspired by common European…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Descaler water container for DeLonghi Nespresso coffee machine. Max fit for Prusa Mini+.
Print approx. €5.81–€7.10 excl. taxPreliminary estimate for one variant
I used the original wing as a reference, but made some changes to make it lighter. idela to print at 0.05 or 0.10 mm with tree supports Weight 2.6 g
Print approx. €0.40–€0.48 excl. taxPreliminary estimate for one variant
A wall mount for 1/32 scale model cars existing of 3 pieces. A support, a bed with name of the model and two pins. You will need a 43mm round or square magnet to embed in the mount. On OnShape you can find the file to change the display…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
A measure with two pointed tips 10cm apart from each other for use as a scale reference in photogrammetry work.
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for one variant
A measure with two pointed tips a fixed metric distance apart for use as a scale reference in photogrammetry. Designed flat so you don't have to worry so much about stepping on it.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
This model of a simple balancing scale was created to be used as a teaching aid in an “unplugged” activity regarding sorting algorithms. The material might be used in computer science or maths classes to give students the opportunity to…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
