Search results: canopy

Sort order

653 models

P
PrintablesmoWerk

Ceiling Rose / Lamp Canopy | Lamp Mounting Plate (Lampenbaldachin)

A versatile, low-profile ceiling canopy system with a height of only 3 cm, suitable for various mounting situations. In case you only look for a holder for your existing canopy, also check the @mikhart remix for 10cm canopys Available…

Print approx. €3.04–€3.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
322
Likes
59
Rating
5
P
PrintablesHoerkes

Lamp Canopy/ Lampenbaldachin

Covers the electrics on the ceiling. Suitable for wires up to 6mm in diameter. The top part is designed to be screwed to the ceiling to avoid slipping down the cable, the botton part holds to the top part with a “click on” mechanism.

Print approx. €1.93–€2.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
154
Likes
30
Rating
5
P
PrintablesHoerkes

Canopy/ Baldachin

Covers the electrics on the ceiling. Can be screwed to the ceiling, screw to be covered with a plug.

Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
77
Likes
11
Rating
0
P
PrintablesTony

Canopy for Ford Raptor

Another accessory for Vit Budina's Ford Raptor. I used snug supports.

Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant

Downloads
75
Likes
6
Rating
5
P
PrintablesDusanH

Improved canopy for PELIKAN/KAVAN BETA 1400 V2 (RC plane)

Printed with PLA (0,2mm SPEED) with 5% Cubic infill. Canopy has place for a magnet, same as original, but can be also fastened using a velcro.

Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
3
Rating
0
P
PrintablesBen Sutton

Backflow preventer canopy

I had to replace the bonnet/poppet assembly on our sprinkler system's backflow preventer (a Febco 765) this year and the new piece didn't come with a canopy. Rather than pay $25 for a curved piece of metal, I opted to just make my own. I…

Print approx. €1.03–€1.25 excl. taxPreliminary estimate for one variant

Downloads
27
Likes
8
Rating
0
P
Printablesorian

Riese&Muller Load60 canopy frame clamp

Sticks from the canopy get used pretty quickly and fall through the holes. This little print helps to prevent it. You need: 4x M3 14mm 4x m3 nuts On the photos the nut hole is bigger, i've made it smaller later. Prints without support.

Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
0
Likes
0
Rating
0
P
Printables3DPrintDemon

Voron 2.4 / Trident Canopy Top Hat - REMIX Split model, half printing time & 5g supports

…Please be sure to hit like & post a make, I'd love to see your prints! EDIT: Finally! STEP file has been added!! Sorry it took so long guys, enjoy!! Add some class to your Voron with this awesome canopy / top hat! If you have a smaller…

Downloads
14,061
Likes
553
Rating
4.97
P
PrintablesMakerMeik

BetaFPV Air Canopy for lower cam angles - For Air65 and Air75 Tinywhoops

This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…

Downloads
2,937
Likes
198
Rating
5
P
PrintablesPrintSomething

Voron 2.4 / Trident Canopy

Canopy for the Voron 2.4. Will need to be printed with supports, corner for fan will need to be mirrored for one side. Will work with 250, 300, & 350. Will use the standard acrylic top panel. Spots for 60mm fans with spacing for charcoal…

Downloads
2,346
Likes
522
Rating
4.73
P
PrintablesWE are FPV

BetaFPV AIR65 TPU Canopy

Remix from “ Air65 Canopy (low angle) ” by raNn . Une nouvelle canopy à imprimer en TPU pour le BetaFPV AIR65 : Incassable Permet des tilts beaucoup plus bas Attention : Ce n'est pas indispensable, mais une impression “dur” facilitera les…

Downloads
1,501
Likes
134
Rating
4.88
P
Printablesneotil

BetaFPV Air65 Canopy Replacement: low camera angle

UPDATE 3: IMPORTANT only use these new files with the cutout for the U.FL socket (see images). The old design by BetaFPV likes to knock the U.FL right off the board… Ask me how I know. If you're in a similar situation, I wrote up a quick…

Downloads
1,429
Likes
90
Rating
5
P
PrintablesKrhom

DJI O4 Air Unit Whoop Canopy

Print in TPU, organic tree supports. I weighed it at 1.7g. There's room to make it lighter for sure, but I also want it durable. Feel free to give me feedback!

Downloads
1,074
Likes
72
Rating
5
P
Printablesusinguser

Meteor 75 Pro O4 canopy, remixed from Flywoo FireFly 16/18

The canopy is modified to be directly usable with the BetaFPV Meteor 75 Pro O4 hardware, i.e. the surfaces were flattened to account for the screw heads, and the antenna holder was altered to fit the fat O4 Lite antenna. Print in TPU or…

Downloads
712
Likes
33
Rating
2
P
PrintablesMartin

Thicker BetaFPV Air Canopy for lower cam angles - For Air65 and Air75 Tinywhoops

Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it

Downloads
710
Likes
73
Rating
5
P
PrintablesspectrexFPV

BetaFPV C03 camera mount/canopy [Improved Complete Set]

BetaFPV C03 camera mount The design combines the idea of brighfive's Bribrain LowRider version requested by the legendary TDog. Features: Available Angles: 10°-60° @ 1° interval apart Weight: Approx. 0.573g Mounting Pattern: 25.5x25.5mm…

Downloads
604
Likes
32
Rating
5
P
PrintablesLumbaLumba

Walksnail 1S Lite Kit Canopy 25.5х25.5 (mobula, meteor etc)

25.5х25.5 Canopy Walksnail 1S lite kit camera (mobula, meteor etc) Weight = 1.7g Angle = 30

Downloads
555
Likes
43
Rating
5
P
PrintablesRodrigo Sclosa

Mobula 6 Demon Canopy

I designed this new canopy for Mobula 6 to solve some problems: It has support for copper antenna on the rear. Upgrade recommended for yours. Support for a small 9mm buzzer. As it is very small, a buzzer is useful to locate it if it falls…

Downloads
531
Likes
35
Rating
5
P
PrintablesMacNeill

Ceiling Rose Canopy Abzweig-Baldachin

I am not sure if the name for this part is right... I searched quite a while for the correct translation. But at first I didn't even know the german word.... :D In german it is called "Abzweigbaldachin" so the direct translation should be…

Downloads
497
Likes
67
Rating
5
P
PrintablesJohn doe

Cetus Pro Frame and Canopy replacement

I crashed my Betafpv Cetus pro and couldn't wait on Frames to come in the mail. I took the hole spacing from NSA imperfect tiny whoop. I removed some structural components from beta75X Frame to get the Cetus Pro Flight Controller to fit…

Downloads
492
Likes
23
Rating
5

CANOPY - BetaFPV Meteor75 Pro Runcam TBS nano 32 VTX - CANOPY

I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame. It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else. ==> NO ZIP-TIES ON PREVIEW PICTURE!!! The VTX antenna is…

Downloads
444
Likes
40
Rating
5
P
PrintablesCarlos

hdzero lux canopy

Based on my design for the eco camera, I developed the lux version as well. Please let me know if you'd like more angles and any modifications. Link to the eco version:…

Downloads
442
Likes
18
Rating
0
P
PrintablesReuben

FPV Drone - Air75 Canopy (1.02g)

I printed mine out of PLA, but I would recommend TPU. It mounts the camera at a 35-degree angle. It mounts on top of the U.FL socket to hold it down, as I found it would always come out with the stock design.

Downloads
415
Likes
28
Rating
3
P
PrintablesBash FPV

Air65 canopy ultra lightweight

Air65 canopy ultra light.

Downloads
414
Likes
40
Rating
0
P
PrintablesWiredEarp

Air65/Air75 canopy tilt extension

This tiny bit of plastic lets you decrease the tilt you can apply to the camera on the Air65 and Air75. This lets you fly slower and still see straight ahead. Weights under 0.1g, which is probably less than most of the other solutions…

Downloads
409
Likes
43
Rating
5
P
Printablespiero menetti

BetaFPV Meteor 65 Canopy V2

Very similar to the original, maybe next iteration will be lighter. Printed in PETG. Category: R/C Vehicles

Downloads
408
Likes
41
Rating
5
P
Printablesedwardsch

Tressym Joker tinywhoop canopy (supports DJI O4 Lite, BetaFPV P1, HDZero Lux, HDZero Eco, NBD BeeEye, BetaFPV C03, Tinywhoop Pinch, Caddx Ant Lite)

In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…

Downloads
397
Likes
35
Rating
4.5
P
PrintablesExerqtor

Voron 2.4 & Trident Canopy PTFE passthrough

Canopy PTFE passthrough CHANGELOG 30.03.2024: Initial release. Description: I'm running both a Nevermore Stealthmax (which have sub-ideal PTFE routing) and "JSmith17's Canopy" on my Trident so I thought I'd make a better and more elegant…

Downloads
389
Likes
72
Rating
5
P
Printables3DPrintDemon

VORON 2.4 TRIDENT CANOPY TOP HAT NEOPIXEL LED MOD!!! CONTROLLED BY MACRO!

…Please be sure to hit like & post a make, I'd love to see your prints! Here's my new Neopixel LED Top Hat Mod ! Add lights to the very top of your printer so you can easily see what its doing from a distance or in a busy room/farm! These…

Downloads
389
Likes
112
Rating
5
P
PrintablesBacon2002

Whoop canopy

This is a strong and light Tiny Whoop style (25.5 x 25.5 mounting) canopy specifically deigned to accept: HDZero - Nano camera (also other 14mm nano style cameras) Happymodel - ELRS PP / EP2 receivers (the RX fits behind the camera on a…

Downloads
383
Likes
45
Rating
5
P
PrintablesFredrik

Voron 2.4 Canopy 300mm middle part

Just did a little bit of modifying to make the 300mm middle part from the original model printable flat on it's back just like the remixed 350mm version .

Downloads
382
Likes
34
Rating
5
P
PrintablesSusManufactory

"Susi-Clip" - Gardening Clip System For Plants and Canopy Support

Introducing the Susi-Clip: the ultimate plant care companion designed to revolutionize your gardening experience. This versatile, plant-friendly tool features an innovative S-shaped form that ensures your plants remain healthy and…

Downloads
371
Likes
143
Rating
3.5
P
PrintablesJorg1d

HDZero Whoop Lite Canopy

Printet in 98A TPU, tested OK with both 0.15 an 0.20 layer height. Without the bottom plate it comes out lighter than the one delivered with Moblite 7 HD :)

Downloads
361
Likes
51
Rating
4.67
P
Printablesdax.neal

Betafpv Meteor75 Pro DJI 04 Lite PP Canopy

Seems to have fixed my jello issue and is more supportive in a crash avoiding the weak betafpv canopy. Shaved some weight off since it is TPU. Used 2 m1.7x14mm screws. One on each side to mount. I use the spacers to provide some rigidity…

Downloads
345
Likes
15
Rating
0
P
PrintablesCarlos

Ultra light hdzero eco and pinch camera whoop canopy

Designed for the hdzero eco camera it will also work with the analog pinch cam. Weighing in at 0.68g this is one of the lightest whoop canopies you can use that actually protects the camera, (your weight can vary on the type of tpu, your…

Downloads
342
Likes
10
Rating
0
P
PrintablesKPV

FPV Toothpick Canopy

Suits a 14mm wide nano style camera (such as the HDZero Nano V2) with an adjustable camera angle between 25 and 60 degrees. Antenna mount is designed to fit the Foxeer Lollipop Mico. Fits on 25.5 x 25.5mm mounting with M2 stack screws.…

Downloads
329
Likes
34
Rating
5
P
PrintablesTokyo_Dom

Mobula6 canopy Pinch camera adapter

This is an improved version of my Mobula6 canopy Pinch Camera adapter. This one uses the camera-holding design from RAB's awesome folded canopy, but I wanted to have the protection, light weight and instant angle adjustability of the…

Downloads
324
Likes
25
Rating
0
P
PrintablesCraftyFPV

Whoop canopy - Improved Fastback

Enhanced Fastback Canopy for TinyWhoops: This version offers additional mount points and is optimized for weight reduction compared to its predecessor. I advise using the 4.1 variant; the ELRS tray in the 4.0 model isn't effective and…

Downloads
323
Likes
28
Rating
5
P
PrintablesFalkien

Voron 2.4 / Trident Canopy Top Hat - REMIX Skirt inserts

Here is what you need to reproduce this. There are two sets of prints single-corner and single middle. When you print the tophat there are (4) corners that consist of 2 prints and (4) middle pieces. I have them named for each set. Here is…

Downloads
314
Likes
100
Rating
5
P
PrintablesRoy

Meteor 75 Pro Flywoo o4 Wide Canopy and Lens Cap

Meteor 75 pro canopy and lens cap for the Flywoo O4 Wide Air Unit 155° FOV

Downloads
313
Likes
25
Rating
5
P
PrintablesTheRealJocki

Haube für Align T-Rex 450 | Canopy

Stützstrukturblocker sind zwingend erforderlich (siehe Bild). Mit der Nase nach unten drucken funktioniert wunderbar. Support blockers are absolutely essential (see picture). Printing with the nose down works wonderfully.

Downloads
313
Likes
13
Rating
0
P
PrintablesGurpartap Singh

Mobula 8 Camera canopy

Modula 8 camera canopy - with and without rumcamthumb pro mount. supported camera angles upto 30deg. Let me know if you need one for more camera rotatiion. Support can be a little tricky to remove but hang in there.

Downloads
310
Likes
22
Rating
0
P
PrintablesMschivou5

Canopy for Firefly 1S FR16 Nano Baby Quad Analog V2.0 ELRS

canopy and batteyr holder for the analog version of the V2 firefly nano. this has the holder for an elrs receiver.

Downloads
299
Likes
22
Rating
5
P
Printablesstubb0rn

Meteor85 Canopy for Walksnail 1S VTX

Canopy for the Meteor85 frame by BetaFPV to fit a Walksnail 1S VTX and its 14mm camera.

Downloads
297
Likes
23
Rating
0
P
PrintablesKrasimir

BetaFPV Pavo 20 Pro canopy for Walksnail Moonlight

That's my variant of the original canopy. I've added holder for 2 antennas and a GPS. Printed in TPU, will see how it holds. GPS used: Foxeer M10Q-120 ← this is my go to for small quads. Amazing performance.…

Downloads
283
Likes
31
Rating
0
P
Printables365lyf

Sim Racing Canopy for Triple Monitors

Developed this sim racing canopy, as I wanted something that had a high quality OEM-like finish with zero flex. Consists of a number of brackets angled at 45degrees for the centre, and 38 degrees for the side. Instructions: You will need…

Downloads
278
Likes
123
Rating
0
P
PrintablesLukasz M

DJI o4 (lite) canopy

Canopy for TinyWhoop 25x25. printed with TMS for AMS (Bambu Labs)

Downloads
277
Likes
16
Rating
0
P
PrintablesCarlos

Whoop canopy for hdzero and walksnail

I like the whoop canopy made by happymodel and also saw that rotor riot develop a tpu version for their vision whoop, but I don't like how heavy it is. So I created my own version which weighs less and protects hdzero v3 cams better. Some…

Downloads
277
Likes
26
Rating
5
P
PrintablesEddie Miller

lidl Glider canopy

A modified canopy for the Lidl Foam glider

Downloads
269
Likes
18
Rating
0
P
PrintablesExerqtor

Voron 2.4 & Trident 350mm Canopy side handles

2.4 & Trident 350mmCanopy side handles CHANGELOG: 30.03.2024: Initial release. Description: I didn't want to remove the handles on my Trident when I started to print JSmith17's Canopy but didn't like the avalible options. I've been using…

Downloads
263
Likes
64
Rating
5
P
PrintablesHyperPrints

Micron Top Canopy

I liked the V2.4 top hat mod, and decided to make one for the Micron as well. This is designed for the 180 version, I will likely also add the 120 and 160 versions soon. These are designed to print flat and will fit on the Micron+ build…

Downloads
256
Likes
66
Rating
4.88
P
PrintablesWilliam McCann

Tiny Whoop Canopy

This is my remix/take on the Canopy used by Mr Shutterbug in his Emuflight DAS video. He stated that he used a model that was remixed by marblekit from a design by DaveC. I found that the camera angle was way too high for my liking and so…

Downloads
252
Likes
19
Rating
0
P
PrintablesAntipode

Voron 2.4 / Trident Canopy / Top Hat, prints flat (with CAD files)

This remix of the excellent top hat by PrintSomething splits the corners at a 45 degree miter and flattens the backs of the middle sections. I also replaced some fillets with chamfers for better printing. I also added alignment guides on…

Downloads
248
Likes
20
Rating
5
P
PrintablesBURDFAMFPV

mobula 8 dji 04 canopy

dji 04 lite canopy for mobula 8

Downloads
247
Likes
18
Rating
0
P
PrintablesNordfpv

BetaFPV CO3 light canopy

I broke my Air65 canopy and didn't want to wait for shipping of a new one. I've seen a similar model to this one on the internet for other cameras, and I couldn't find a light weight canopy for the betafpv CO3 camera that I could use, so…

Downloads
246
Likes
29
Rating
0
P
PrintablesMupshot

PVC canopy

A challenge was laid down infront of me to build a bed fort. Using the mounting holes for an upper bunk bed and 1in PVC, this was my answer. pieces: base mount . accepts the vertical and 45deg support. The 2 piece version allows for…

Downloads
246
Likes
62
Rating
0
P
PrintablesLuis Pereira

O4 canopy for flywoo lens mod

Printed this to use on my meteor75 pro with the flywoo O4 lite lens mod. Still waiting for the lens mod to assemble everyting.

Downloads
244
Likes
14
Rating
0
P
PrintablesSpokalope

Meteor 75 Pro Canopy (Flywoo Wide Lens DJI 04)

Minimal canopy design for the Meteor 75 Pro 04. It allows camera angles of 5 to 30 degrees. Printed out of Nylon, it weighs 1.36g (after paint) and 1.27g (before paint). Cheers!

Downloads
240
Likes
17
Rating
0
P
PrintablesGeekMystique

Easy print Moblite / Mobula canopy for Caddx Ant Lite

Strongly inspired by the very effective design of ngn33r: https://www.thingiverse.com/thing:4859251 other cam sizes & angles can be updated in the provided F360 files.

Downloads
239
Likes
27
Rating
4
P
PrintablesSSX556

M2 Caddx Ant Lite Adapter for Mobula6 & 7 1S canopy

A small adapter clip to screw a Caddx Ant Lite into a Mobula6/7/8 canopy using M2x4 screws and M2x3 heat inserts. M2x3 heat inserts from cnckitchen Be careful while melting the inserts in as the plastic walls are very thin. I added a…

Downloads
239
Likes
25
Rating
5
P
Printablesfpvgio

Mobula8 DJI 04 Lite Canopy

tpu 50%infill - weight with 04lite = 21g. 0.2mm layer height organic supports should fit original 04 lite camera faceplate & and axis flying 14mm camera housing. install your camera first and run a small zip tie through the spaces at the…

Downloads
224
Likes
18
Rating
5
P
PrintablesCarlos

DJI 04 air lite canopy V2

A completely redesign of the previous canopy with a few improvements. Easier to install the camera into the canopy. Opens up like snakes jaw. Rigid structure, which helps in crashes and reduced jello on high throttle maneuvers. ND Filter…

Downloads
215
Likes
24
Rating
0
P
Printablesseansean

OMPHOBBY M2 EVO CANOPY

OMPHOBBY M2 EVO CANOPY OMP HOBBY M2 EVO CANOPY

Downloads
215
Likes
8
Rating
4
P
PrintablesKR4MT

S500 Canopy

I beefed up and shortened the sides on the original and made a couple of mounting brackets. Front cowel mount uses an M3 threaded insert in the center and the rear tab is secured to the rear inside of the canopy using the short extended…

Downloads
213
Likes
5
Rating
0
P
PrintablesKidCe

"SmollPP" Canopy

Update 04.01.2025 Updated Normal version to V22: Improved Antenna Holder hole sizes to better fit the HDzero AIO5 Linear antenna Removed holes that were scattered over the whole design at the cost of +0.02g weight to improve durability…

Downloads
212
Likes
29
Rating
0
P
PrintablesTyp_im_dunkelln

75mm Tiny whoop (mobula7/meteor75) canopy for big-lens 14x14 camera like a foxeer Toothless 2 nano (starlight)

1mm wall thickness Can be printed in PLA or PETG with some overhang artifacts, that noone will ever see 😇 TPU might work as well, but won't be as protective for the lens. Suitable for Foxeer Toothless2 nano (Starlight) camera (14 mm wide,…

Downloads
212
Likes
20
Rating
0
P
PrintablesNoah Gunderson

Flywoo Wide Angle Lens Whoop Canopy V2 - 5°-25° Adjustability

This is my take on a tiny whoop canopy designed to accommodate the Flywoo O4 Wide camera. This is currently being used by FPV Manitoba ( https://www.instagram.com/fpvmanitoba/ ) for tiny whoop commercial shoots. It’s a derivative of my…

Downloads
212
Likes
13
Rating
5
P
PrintablesCarlos

HDzero Lux camera long leg canopy

Raises the canopy above the board, should help reduce stress fracture on the vtx or aio5 boards. The camera cage is based on my previous designs and keeps the weight low while giving some protection to the camera. the canopy comes in at…

Downloads
210
Likes
6
Rating
0
P
PrintablesDUSTO221

Voron Trident/2.4 Canopy tophat Box turtle mounts

I was asked by a few members in the BoxTurtle community to design some mounts for their Voron 2.4's which use this tophat design: Printables link for tophat:…

Downloads
210
Likes
54
Rating
5
P
PrintablesChris Thijssen

TIny Whoop canopy's

Tiny whoop canopy. For the runcam nano3 , flywoo nano and foxeer pico , the betafpv c03 and the ant lite. v2 is lightweigt race , v3 is freestyle low angle. They are adjustable withe the extra mounting hole.

Downloads
210
Likes
35
Rating
0
P
PrintablesLukasz M

O4 canopy for Mobula 8

This is a O4 canopy for Mobula 8. Recommended printing with TPU 68D filament (I printed with TPU for AMS). I recommend setting 100% infill and using tree supports. When printed with PLA and subjected to a crash, it breaks (tested). Allows…

Downloads
207
Likes
3
Rating
0
P
PrintablesAlex G

Volantex Phoenix & Ranger 2400 FPV canopy - DJI O3

FPV canopy for Volantex Ranger 2400 and Volantex Phoenix 2400. With 9g servo mount and designed to house DJI O3 air unit. It will also work with any other VTX since you can use zipties to mount VTX in place. This is a rough first version,…

Downloads
203
Likes
15
Rating
0
P
Printableskevinstonehouse

Aero Canopy (RCExplorer Bicopter)

A few years back I purchased one of David Windestål's newly released Bicopters from RCExplorer (https://rcexplorer.se/). This was a very interesting RC build and a challenge to fly. However the carbon-fiber canopy made it very difficult…

Downloads
202
Likes
96
Rating
0
P
Printablesrodsgear

Caddx Ant and Ant Lite Canopy for moblite style tiny whoop

Based on the model posted by MrShutterBug on Thingiverse.

Downloads
199
Likes
27
Rating
5
P
PrintablesMadman1027

DJI O4 friendly canopy

Many toothpick canopies for a 14mm camera are not suited to the up front bulk of the o4 (lite) camera so I designed this canopy to work with my o4 mount ( https://www.printables.com/model/1147195-dji-o4-lite-14mm-camera-mount ) providing…

Downloads
194
Likes
31
Rating
0
P
Printablesgue-ni

BetaFPV Air65 Canopy for Lower Camera Angle

This is a canopy for the BetaFPV Air65 (C03 camera) tiny whoop FPV drone with a camera angle of just 15 degrees, perfect for indoor flight. It allows slower and more controlled flight. The canopy is also reasonably light weight and…

Downloads
192
Likes
23
Rating
5
P
Printableslameandboard

Mobula 8 - o4 lite canopy - remix of burdfamfpv's

tested and works great! I just added a higher angle version….

Downloads
190
Likes
6
Rating
0
P
PrintablesChris Thijssen

Hdzero Tiny whoop canopy for Lux and Eco (45 and 40 degrees)

Previous canopy's all smashed the cam into the AIO. Was seeing the briBrain for the analog build so modded them for hdzero. And made a version that fits the lux cam.

Downloads
189
Likes
11
Rating
0
P
Printablesyinyang08

O4 Mobula Canopy Adapter

Remix of Krhom's first O4 mount. No supports needed, printed in TPU 95A, works with the OEM self-tapping screws, maintains some camera tilt options. You do need to trim the canopy arms around the USB-C and the Digital port so they're not…

Downloads
187
Likes
15
Rating
5
P
PrintablesRACBOTS

Tiny Whoop Canopy Mobula 6

Canopy para tiny whoop Mobula 6 en filamento flexible TPU en diferentes diseños con orejas, tiburón y simple. Especificaciones: Para imprimir de manera adecuada el filamento flexible TPU, se recomienda usar una impresora 3D de extrusor…

Downloads
185
Likes
22
Rating
0
P
PrintablesAl Mon

Pilot and New Canopy - Viper

Canopy with sprue attached. The show Vipers - some had some did not have this feature. Up to you. Also a pilot. Very rough. You will need to tweak it. I cannot guarantee the pilot will fit perfectly.

Downloads
184
Likes
14
Rating
0
P
PrintablesTim O'Brien

DJI O4 Lite Tiny Whoop Canopy Project

Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Add the best 9g video system to your Tiny Whoop! I've fully modeled the field-of-view (FOV)…

Downloads
183
Likes
29
Rating
5
P
PrintablesBing

Voron 2.4 / Trident Canopy Top Hat - REMIX For 1-0-R Handle

A remix that allows for 1-0-R handles to be left on for a top hat.

Downloads
183
Likes
40
Rating
0
P
Printablesseansean

goosky s1 canopy

wall line count 3 or more recommended no need grommet

Downloads
181
Likes
8
Rating
0
P
PrintablesAgent942 (GW)

Ozark Trail Pop up Canopy Tent Top Center Hub V2

So, the Ozark Trail pop-up canopy tents are pretty popular in Canada, and I've had mine for little more than one year. This year, I didn't peg it down and the wind flipped it over (upside-down) and this stressed the center hub, breaking…

Downloads
181
Likes
16
Rating
0
P
Printablestjdesign

Canopy Board Game Insert

This is a little insert I made for the game Canopy by Weird City Games. There is a version for sleeved cards and unsleeved. The unsleeved version has a card tray for easy draw/discard, and separate playable trays for the other components…

Downloads
176
Likes
37
Rating
4.83
P
PrintablesHypnocif

Meteor 75 canopy O4 Wide DJI officiel.

Une canopy pour le Meteor 75 Pro et le nouveau DJI O4 Wide. Chez moi ça vol très bien et sans "jello".

Downloads
171
Likes
14
Rating
5
P
PrintablesLuis Pereira

Canopy for flywoo O4 lite ultra wide lens

This is amount for the flywoo ultra wide lens mod for the O4 lite with O4 Pro mounting. I dont hev pics of this mount in particular, but there is some pics of the O3 version of this mount on my meteor75 pro here:…

Downloads
167
Likes
15
Rating
0
P
PrintablesRocco DiVerdi

2 Material Moonlight Canopy for Pavo 20 Pro

The main body of this canopy secures the antennas and camera to the frame. I printed this portion with PETG-CF, although any PETG or ABS should be fine. Use 4x m2 heat set inserts (2 mm tall) for the mounting holes. The TPU bumper is…

Downloads
163
Likes
18
Rating
5
P
PrintablesKeith Luneau

Esky Eagle Walksnail - Canopy insert and pan/tilt

You'll need to trim some foam from the canopy and glue the insert in place. I placed mine so the front of the insert is about 10mm behind where the air intake stops. Trim the hole a bit small at first then fine tune for a snug fit, it's…

Downloads
163
Likes
19
Rating
0
P
PrintablesPeter Petermann

Tiny Champion FPV Racing Drone Canopy

Warning this canopy is meant for the looks, it is not designed to make your drone go faster (infact it adds a bit of drag and weight), and as its very tight inside, it is more likely to damage your stack in hard crash, than it is to…

Downloads
159
Likes
28
Rating
0
P
PrintablesG4ZO

mobula 7 canopy

1mm wall thickness It is recommended to print in resin but should also work fine in FDM. Suitable for Happymodel Ant camera (14 mm wide). Mount hole size: 25.5mm*25.5mm

Downloads
158
Likes
9
Rating
0
P
PrintablesCybuster

Flywoo O4 lite wide direct mount canopy

This is the direct mount canopy for Flywoo O4 wide lens - without 18mm or 20mm adapter. Which will save almost 4g. Canopy canopy itself is 2.81g. It is mounted using M2 screws to the frame (Crux 3) 0 - 20deg adjustable

Downloads
158
Likes
10
Rating
0
P
PrintablesF. Mandel

DJI F450 Canopy - FC Protection

Canopy - FC Protection. Can be zip tied to the fram. The screw heads keep it in place

Downloads
157
Likes
12
Rating
0
P
PrintablesRice_Bowl

Hachidorii C03 Canopy

Though you can use most canopies for the Hachidorii XS and V2 - with some slight modification to the holes to press fit onto M2 nylon screws , I've decided that it would be great to have a set of canopies for a few cameras. These aren't…

Downloads
156
Likes
12
Rating
5
P
Printablesdp makes

Swing Seat Roof Canopy Bracket

Swing Seat Roof Canopy Bracket. Printing Instructions: Resolution: 0.15 Infill 30-100% Supports: No Rafts: No

Downloads
156
Likes
18
Rating
5
P
PrintablesCunfusu

Air65 C03 camera adapter for Mobula6 / Mobula7 canopy

Frustrated with the fragile and difficult-to-source stock canopy for the BetaFPV Air65? The original canopy, while lightweight, breaks easily and offers limited, cumbersome camera adjustment. This design allows you to upgrade to a more…

Downloads
155
Likes
5
Rating
0
P
PrintablesRocco DiVerdi

2 Material Walksnail Canopy for Pavo 20 Pro

The main body of this canopy secures the antenna and camera to the frame. I printed this portion with PETG-CF, although any PETG or ABS should be fine. Use 4 m2 heat set inserts (up to 4mm tall) for the mounting holes. The TPU bumper is…

Downloads
153
Likes
13
Rating
5
P
Printableslimago

Smaller lamp canopy IKEA Hemma

The quite large lamp canopy of IKEA Hemma didn't fit our beamed ceiling, so I designed a smaller diameter (110mm) and overall size. The original cord routing screws in very well. Drawing is not fully defined, excuse for not being fully…

Downloads
150
Likes
25
Rating
5
P
PrintablesTim O'Brien

ZOHD Drift Canopy: Lightweight Vasemode

My friend lost his ZOHD Drift's front canopy– so I designed him one to be 3D printed, obvi The original one, even when printed with 1 perimeter and minimal infill, was still far too heavy and so strong it was vast overkill. So I…

Downloads
148
Likes
5
Rating
0