24,878 models
Model To prevent fast dry out of your started silicone/acrylic cartouche print this cap and screw it onto your cartouche. The cap has a conic inside to close the opening better as just a plain cap. Printing instructions I used PLA but…
Cap/Cover for female Ethernet Ports to prevent dust from getting inside. Easy to print without any supports. You can use a brim if you have adhesion problems. Both, PLA and PETG, are fine. But I would suggest to use PLA, because PETG has…
--- latest Update: Salt & Pepper Insert! --- Since the camping season is starting again I designed Inserts to use the Container for Salt & Pepper or sth. like that. Also I did minor improvements to all parts. --– Printed O-Rings (TPU) ---…
I've long been a big fan of the Keycappie by Romly, a great little figure that can house a an MX compatible mechanical keyboard switch right in his head. They're so cute that I couldn't resist the temptation to make one of my own. I'm not…
This is one component of Yet Another Drybox . If you are planning to build your own box, have a look! You might find other components useful for your build, or maybe you even end up building the complete box 🙂. When building my filament…
Wanted a cap that sat a little firmer on, as they tend to fall off, or crack when you try to make them sit well. Recommends printing with maximum 0.1 layer height. Printing multiple at once is no problem. Remember dry filament. You might…
Whether the dog chewed your lens cap, or it fell off a cliff during that last hike, the solution is one print away. Recommendations: Print Material: PLA Infill Percent: 15% Layer height: .15 (a layer height greater than .15 will not work…
Weathered Rusty Nuka Cola Bottle Cap Make it into a keychain or a coaster. Good Candidate for Drybrush Technique.
Info: another hand model for valve cap ALOHA! Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or adjust slightly. 3mf file…
Introducing the Cherry MX Compatible Flat Top Keycap, the 3D printed keycap that makes typing a whole lot more fun! With its sleek and stylish flat top design, this keycap is the perfect way to add a personal touch to your keyboard.…
Bierverschluss für draußen als Schutz vor Insekten. Der Verschluss ist nicht zum festen abdichten gedacht, Print in Place. Gedruckt mit PLA 0,15mm Schichthöhe und 5 Wänden. Zusätzlich: Update 26.01.25 etwas mehr Spiel in den Gelenken, für…
This ergonomic bottle opener is designed to easily twist off caps ranging from approximately 26mm to 34mm in diameter . Ideal for people with reduced hand strength, such as seniors or children, it features a well-shaped handle that offers…
Customizable car / bike tire valve (Schrader) cap with thread. The thread starts from the middle so you don't need to make so many turns and it's easier to put on. There's an extra space for a tip. Print instructions Any filament works…
My wife needed a Nespresso Capsule holder that was small and did not take up much space, so I designed this one for her. She was very very happy with it! This Capsule holder takes 15 standard Nespresso capsules or Nespresso compatible…
I wanted an airtight PC4 feedthrough for my drybox, so i took some insperation from the RoboMagus solution and iterated to this solution. The cap is capable of sealing the whole feedthrough airtight, when it is not in use. I also added a…
This is a more elaborate bottle opener (using the same basic profile from my OpenScad Bottle Openers here ) which aims to be used with only one hand. Tip: Use your thumb to keep the opener in place. There are two similar designs:…
Sizes that have been tested and confirmed to fit. Size 000 Size 00 Size 0 Size 1 Size 2 Size 3 Size 4 Sizes I have not yet tested I pulled the size specs off the web but you will have to test the actual fit and function yourself. Please…
I had trouble printing existing Schrader valve cap models in PETG, so I designed my own. This model has some error tolerances built in so it should work better with PETG which isn't as dimensionally accurate as PLA. Print in 0.15 layer…
Verbesserte Version: Einteilig und einfacher zu Drucken Improved Version: One piece and easier to print GCODE is only for Creality Ender 3 S1 Printer !!! Print Settings Printer brand: Creality Ender-3 S1 Supports: Yes Resolution: 0.2…
Overengineered rear lens cap for Canon EOS RF lenses. Missing the align notch and stopper. Print instructions Print .1 or 0.2 mm P.S. Donations welcome, my cat keeps chomping the filament.
UPDATE : A NEW MODEL HAS BEEN RELEASED, WITH SCREWS https://www.printables.com/fr/model/772056-devil-horns-for-your-hat-now-with-screws I love to add little custom stuff to my caps, so : why not horns? Use the holes on the cap to fix the…
Use this cap and a bit of 4mm PTFE tubing to turn any common PET pop bottle into a squeeze-to-squirt “lab bottle”. Prints without support in any rigid material. Either cut the washer out of an old inner tube, rubber sheet or print in…
I designed this model for my keys.. just for fun.. I know they cost cents, but it is more fun to print them by yourself, I am right? Settings: 0,4mm nozzle 2 perimeters no infill needed Don't forget to share your print with us! :)
The body cap has a slightly undersized M42x1 thread and the rear lens cap has a sightly oversized M42x1 thread. This ensures a loose fit. The prints shown in the pictures were done with a layer height of 0,15mm.
This 3D-printed bottle cap is designed to protect the opening of glass bottles from insects, making it ideal for outdoor use. The cap features internal pockets for magnets (2 pieces of ⌀8x2 mm magnets required ) that allow the caps to…
Ballerina cappuccino Meme. uv upscale Illara on huggingface.
The Yubikey 5 NFC and Yubikey 5C NFC have slightly different dimensions which is why there are two different designs. The Fusion 360 parameters can be adjusted to accommodate other models. The cap fits on the key one direction with a…
Idea I needed a new lens cap for my lens and tried to challenge myself to desing a one piece one that has built in springs. This is the result of that. Printing The print is fairly self explanatory, just print it with the logo side down…
Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…
Low profile right angle cap for the Neutrik NC3MXX or NC3MXX-B. The thread screws into the plug about 1 turn, this seems to be working at least with the cable I have. It also holds the pins in place. Perfect for your audio mixer bag,…
No supports needed, print it in 0.20mm in PLA, available in 3 sizes tiny medium big You can scale it to make it bigger (photo shows medium and big) A regular version is available for the box/carton, but you can also print the version with…
Hello, If you like my design, please like and share it! This is an engine cover nut/bolt cap I made for my 1995 BMW 325i E36. There are 4 caps in the engine bay that clip in once the 2 nuts and 2 bolts are installed for the two-piece…
Sleeve that slips over the 2-stroke oil fill cap that reduces the build up of dirt to the underside of the cap lessening the chance of dirt being introduced into the oil tank during oil fills. Print simply slides over the top of the cap…
Decorative Croc valve stem cover. Includes both schrader and presta valve cap styles. After several test prints, found it came out best printing on it's side with some supports. Also remixed from the following:…
Goes into Tomy Gacha gashapon vending machine
Remixed and combined a keycap with Star Wars Figures. I have made a FULL-BODY and a HEAD-ONLY versions. Choose what you like. Print Instructions: 0.1mm height 15% infill Supports are recommended Please share\like\add a make if you liked!
Modular The cupholder is modular and you can stack the module vertically as high as you want. To have a nice finish there is a top that you can optionally add. Installation The system is not fixated by itself, and is meant to be fixed to…
Both pieces need supports . It should take less than an hour and a half in total. For the settings keep reading, for the story skip down below. The assemble it make sure all supports are cleared and slide the end without the ridges under…
Need: Lens cap that can help prevent scratches and excess dust on the front element. This is my take on a solution to that need. This design uses common springs found in ball point pens. The spring dimensions are 4.5mm Diameter and 18mm…
This is a 7 Cigarette container with a slide cap. The box should be printed in PLA and the cap in ABS for smooth slide! Note that if both are PLA the cap slide does not work properly (too stiff). The assembly of the cap is made by forcing…
These are the settings for a wrench to open Dr. Pepper bottle caps (and most likely many other brands). diameterB: 31.1 toothCountB: 24 toothHeightB: 0.7 toothWidthBottomB: 2.3 toothWidthTopB: 0.7 toothCurveB: false ringThicknessB: 2…
This is a simple valve stem cap I made for my Chevy. Great idea for a gift or just to doll up your ride. You may need to print it with a brim! The pre-sliced file is for 5 caps. Color break is at 14.3.
NASA Space coffee mug ( capillary cup ) enables drinking in zero gravity. Now we can all drink like astronauts. Also it is fun way of teaching kids about physics and space. If you want to drink from it make sure you treat it to be food…
I made small adjustments so that the structure. I recommend reducing the printing speed to 80% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Baseball Cap Holder This support-free wall holder is designed to hold a baseball cap. It was inspired by other similar models but I didn't like that they all seemed to either require supports or weren't designed for command strip…
I designed this picture frame in Fusion360 to be customizable, print support free, snap fit together easily and feature a storage spot inside for special items. It is intended to fit a 4"x6" or 100mm x 150mm photograph. I used a piece of…
Nespresso Capsule Holder - remodeled
For such a simple design this was a cumbersome fix. And its really hard to tell or explaine why. Generally, when I have to resort to “remeshing” (modifyer in blender) after adding uv displacement that will fix anything. It adds its own…
A much-improved version of my original VMU cap replacement that's about 95% accurate to the official Sega cap. I meticulously measured every little detail to make sure it fits perfectly, and it does! Visually it's not a 1:1 copy but it…
Who hasn't lost one of these... fortunately we can just print us new ones. The first time you use them they will most likely fit a bit tight. It's best to use an old valve for the first time. Added the fusion360 file. So if someone wants…
UPDATE : [May 14, 2024] Added STEP files. NOTE : This set of prints is now complete, with the sizes and dates added as follows : 05/18/22: #4,#6,#8,M2,M3,M4 05/10/22 : #10, M5 05/19/22 : 1/4",M6 05/10/22 : 5/16", M8 05/19/22 : 3/8",M10…
🇺🇸 Welcome to Washington D.C.! Continuing with the project of recreating the National Mall in Washington D.C. for the MiniWorld3D catalog, here is the Capitol Building , heavily remixed and improved by Dany Sánchez from the original…
Wanted a better spot to put our coffeecups. 6 holes for screws. Size: 230mm x 169mm holds 24 cups. Made my wife actually happy, it might be the reason she allowed me to buy the Prusa XL. Printed mine in PETG with brim.
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop 🏆 To celebrate the win I've added Low-Profile Legs that reduce the height 5cm! 🎆 It's Lazy Susan Mode!! 🍰 MMmmmmm This is purpose-built to make icing a breeze. Retaining rings…
A quite minimalistic holder for Nespresso capsules. Holds 5x4 capsules. Print instructions Prints without supports as is.
A 3d printed scaper's tool is a handy device for aquascaping enthusiasts who want to create and maintain beautiful underwater landscapes in their aquariums. It also works great as a scraper. The design of the scaper's tool is parametric,…
Decorative end cap for two ø2mm paracord ends, to either close a loop or set a colour accent. Also works for a single ø4mm end. no knots no tools no extra parts no support geometry This print is tested with and developed for 0.25mm…
This is my holder for Nescafe Dolce Gustro capsules. I glued it (double-side tape) on side of fridge for saving space in kitchen. Double side tape is strong enough for weight of capsules. I made it from two pieces (Prusa MK3 working space…
My Littelest Great Grand-Daughter borrowed one for her kitchen and didnt return it, so i decided to try and design one. I came up with two versions. One is Bigger & more Rugged The Other is slightly smaller and fits better than the…
Marge and Homer Valve Stem Cap : Bike Cap Fits Schrader Valve Stems.
V.2 Updated - Adjusted the stem to 4mm width and added chemfer -------------------------------------------------------------------------------------- This is a simple 3 * 4 artisan keycaps storage box with cover. I printed the cover with…
The endcap is held by a middle pin into the profile. The small standoffs prevent rotation. There are 5 Versions since different extrusion brands also have different hole sizes: with a pin for a 5mm hole with a pin for a 5.5mm hole with a…
This bed scraper has a new 0.2mm lip on its backside to easily lift flat prints with big adhesion.
I created this little ‘’capsule'' to allways have with me some headaches pills. It's a nice EDC item to print for less than an hour and less than 2m of filament. Printed on a Wanhao D12, with ArianePlast PLA. PS: my printer who was nicely…
In these mini containers you can put, for example, nozzles, washers, small screws, nuts etc. Three dimensions from 10,15 2 20mm high, both open and closed (the open ones for example I use them to contain the silica gel). The caps are…
This is a tire valve cap with a Toyota logo I made to give as a gift. Super easy to print. Color change is at 14.3. You may need to print it with a brim. The pre-sliced file is for 5 caps.
A simple tool to help pulling the keys/keycaps of a keyboard.
Simple Circular keycap for Low Profile ZT04-Red Mechanical Switch, sold on Alixpress.
1x1 keycap for Logitech G915 TKL with Bitcoin logo. I used supports to the bed, using needle nose pliers made removing them simple. Careful not to grab the nibs. --- If you feel like tipping me, send a bitcoin lightning payment to…
EDC Micro Series. Compatible with each other. See also: EDC Micro Knife - Keychain (Scalpel) EDC Micro Screwdriver EDC Micro Tools I EDC Micro Tools II EDC Series Box Continuation of the series. EDC Micro. The same capsule or twice as…
This is a small cap for your cap ! Use the holes on your cap to pin the little cap and enjoy :) Print without supports with PLA
Silica gel container with screw cap. Height 55mm, width 53mm. 13 Jan 2021 update added model with smaller holes to better support silica gel brands with uneven pellet sizes
A Cap for the "Prusa lubricant LM8UU adaptor" Designed by Honza David. This is ONLY the Cap, for the adaptor check out David Honza´s Design. It is a loose fit . If you want it to be tight scale in down in the slicer. “With some trial and…
Revision Notes 8/23/2026 - I added a Small-to-Large connector cap after a few people requested it. There are three kinds of connector in this set. I have found the smaller connector fits many types of hand soap, dish soap and lotion. The…
Take a look at Shrek Valve Cap ! --------------------------------- Good looking valve cap for your bike made for Schrader type valve = most common --------------------------------------------- Print : 0.15mm NO Supports PLA, PETG, ABS…..
I needed to make something to attach to a PET bottle and couldn't find a model file to import into FreeCAD. So here's one. The model is not really useful for anything (unless you desperately wish to have a ring screwed on top of your PET…
Little helper for disabled people or people who have difficulties holding thin pen or pencils. This design was handmodeld with clay to fit into the right hand and then 3D scanned with the Revopoint Pop-Scanner. Afterwards it was modified…
Remix of https://www.thingiverse.com/thing:2864058 to fit on Prusa Mini and Prusa MK3s. Holds 24 capsule. No supports needed.
Eyeballing the keycap profile is really annoying. Therefore, I went and did this tool to help you identify the correct row. This is meant for Cherry profile keycaps . Feel free to reference https://www.keycaps.info/ for the profiles. If…
Wanted something like the original design but something to protect Ethernet endcaps. Also made the gap to hold the cable inside the clip better.
Another edit of a Disney infinity fanart model on SketchFab by JohnLogostini . This is my printable version of it, with a lot of detail in the model itself, instead of maps. Printed at 10cm high on my mk3s+ I added a photo of that print,…
Vase print of a 32 ACP (Automatic Colt Pistol) cartridge based off of SAMMI drawings. Intended to be a dummy round AKA a snap cap. 0.6mm nozzle, printed in PETG, 0.15mm layer height. Have not tested in equipment, but recommend you print…
Starship shaped valve cap for Schrader and Presta valve types
Hello! Forgot to add the boot/cap/cover to your RJ-45 cable and you crimped it already? been there, done that. Hope this helps. This is a work in progress (W.I.P.) as it's not the easiest print using FDM printers, yet. Update 2022-09-07…
A simple cap to protect your male USB C plugs. Its a slight press fit. Can be printed from any material. Note: The gcode information in the header is for utilizing PrusaSlicer's "fast detail" print profile.
Little helper to inject grease into Misumi LM8UU and LMU8 bearings. The injector is designed to fit Nigrin 74145 multipurpose grease, which is one of the recommended lubricants for mentioned linear bearings. The thread size is M24 x 3 I…
It's remix of Cherry MX Keycap and The Rock's Head . Not being by my 3D printer for some longer time now, so I decided to put this just as .STL without trying to print it (unfortunaly). Use of raft is recommended. Print should be fine by…
Tokyo Marui 5.1 Hi-Capa Magazine Base
Hex valve cap with Moai on top got the valve cap base form here https://www.printables.com/model/524947-hexagon-presta
I printed a couple of copies of @Adam 's most excellent rock scent-training capsule recently: https://www.printables.com/model/295199-scent-trainer-rock and was impressed with both the concept and execution. As an aside - I've also…
Not much to say about this except I can do this all day…
Material wahlweise, z.B. PLA, PETG, ASA, etc. Layer: 0,15 - 0,2 Infill: 20% No Support, no Brim needed
Endcaps for 40mm aluminium profiles. 40x40 40x80 40x120 40x160 80x80 80x120 If you like the print profiles, please consider rating them. Thanks :-)
Endcap for 30x60 mm aluminum extrusion.
This is a replacement cap for the Schott GLS80 glass bottle. The cap has an one sided dovetail groove, so the O-Ring will keep in the cap. Why one sided? I have first tried a two sided dovetail groof but I had some tightness problems with…
Holds 20 capsules. Brim required for stability Print instructions 15% fill Update: New version available here https://www.printables.com/model/129039-nespresso-capsule-holder-version-2
I had previously re-mixed some dog scent training capsules that had a magnetic base - https://www.printables.com/model/936563-magnetic-dog-scent-training-capsule My daughter wanted to use the capsules with a cheap rubber safety non-slip…
Ich habe die Ferdern für 55 und 72mm Objektivdeckel entworfen. der Remix von Martin stellt eine Version für 49mm Objektivdeckel bereit I designed the springs for 55 and 72mm lens caps. Martin's remix provides a version for 49mm lens caps.
