Nespresso Capsule Holder
Nespresso Capsule Holder - remodeled
Print approx. €7.67–€9.38 excl. taxPreliminary estimate for one variant
- Downloads
- 726
- Likes
- 167
- Rating
- 5
Counting matching models…
Nespresso Capsule Holder - remodeled
Print approx. €7.67–€9.38 excl. taxPreliminary estimate for one variant
EDC Micro Series. Compatible with each other. See also: EDC Micro Knife - Keychain (Scalpel) EDC Micro Screwdriver EDC Micro Tools I EDC Micro Tools II EDC Series Box Continuation of the series. EDC Micro. The same capsule or twice as…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
The pillbox that's fun to open, even if you don't want to take your pills. It's amazing for daily usage because it is fun to use it. It is not just another PillBox, this is Awesome BrainZap! PillBox . PillBox is designed to store your…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant
Nespresso coffee capsule holder for Prusa MINI. I had to make this model because the original did not fit the mini. Just use some double-sided tape to attach it to the wall. Print instructions Print in PLA or PETG I used 15% infill for…
Print approx. €3.58–€4.37 excl. taxPreliminary estimate for one variant
One piece version of the excellent Nespresso Vertuo Capsule Pod Dispenser by sdgsean. Modeled to support 3 slide out drawers of the original design (included here but is the same as the original model). Printed front facing side down with…
Print approx. €39.36–€48.11 excl. taxPreliminary estimate for one variant
Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.
Print approx. €6.77–€8.27 excl. taxPreliminary estimate for one variant
Printing instructions: Magnet encapsulation in PrusaSlicer is accomplished by pausing the print before the layer that covers them : Slice the 3mf file according to your preferences. Scroll to the first layer that will cover the magnets.…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Two designs capsule holder for Dolce Gusto Nescafe coffe maker. Both are mobile, you can attach the base to the table with double-sided tape to allow the capsule holder to rotate on its own axis. The expandable design has 10cm height…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
I picked up a second hand Nespresso Vertuo Plus which was missing the rear capsule catching container so I decided to print one! My print bed is 210mm so it doesn't quite reach the top, but that's ok, capsules still fall in correctly. I…
Print approx. €5.83–€7.13 excl. taxPreliminary estimate for PETGSource material: PET
Needed a model for a project which is more solid than the real coffee capsule. So this is what I've created :-)
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
A Dual Egg Capsule (2 eggs) for Egg Loft Altitude events, specifically designed to be printed with LW-PLA. Modeled and created to fill a need for rocketry hobbyists as no commercial Dual Egg capsule kits are available. Foaming LW-PLA can…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
standing Nespresso caffee capsule holder 2 line with cut out for easier use.
Print approx. €8.70–€10.63 excl. taxPreliminary estimate for one variant
useful for delivering any small message or item. make sure to give me credit if this is sold
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
SUpport de décapsuleur fait pour graver sur la xtool M1 des décapsuleurs en bois
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…
--- latest Update: Salt & Pepper Insert! --- Since the camping season is starting again I designed Inserts to use the Container for Salt & Pepper or sth. like that. Also I did minor improvements to all parts. --– Printed O-Rings (TPU) ---…
This small capsule can be used as an EDC accessory case, providing a convenient way to store and carry matches, pills, batteries, or other small items. Included in the design is a looped top, allowing you to conveniently attach to a…
Keep your small essentials organized, safe, and stylish. This 3D printed EDC (Everyday Carry) container is designed with a focus on tactile feel and rugged utility. The detailed knurled texture not only provides an excellent grip—even…
introducing “TANK” the small but heavily rugged capsule/container for any kind of outdoor usage. waterproof against rain when using O-ring with dimension 3.5mm x 31.7mm (ID). I have included some STL- file of such ring for reference but…
A Keychain of the Capsule Corp. Logo from Dragon Ball/Dragon Ball Z/Dragon Ball Super Saga's. This model is specifically made for Glow in the Dark elements but can take any color or themo-platics you want. Just keep in mind that different…
Small Nespresso capsule holder. Two variants - for 24 pcs (only Part 1) or for 48 pcs (Part 1 and 2). You can remove the cover and fill the capsules into the holder body. Print instructions Printed with Prusament PLA, without supports.
A beautiful flower pot permeated with a organic double wall voronoi outside shell. This wonderful art decor is also ideal as a gift and as decoration everywhere an eye-catcher! I have printed it with 5 layers and the pot was waterproof. I…
This is a capsule holder I designed to be glued to a the side of a Nespresso coffe maker. It holds 3x5 capsules. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Notes: No supports required, print on flat side.…
My wife needed a Nespresso Capsule holder that was small and did not take up much space, so I designed this one for her. She was very very happy with it! This Capsule holder takes 15 standard Nespresso capsules or Nespresso compatible…
My version of a nespresso capsule dispenser. If you need it , print it ! :-) Happy printing. Printing advise: None realy. I used PLA, 15% infill and no supports. For the loop use a brim.
Sizes that have been tested and confirmed to fit. Size 000 Size 00 Size 0 Size 1 Size 2 Size 3 Size 4 Sizes I have not yet tested I pulled the size specs off the web but you will have to test the actual fit and function yourself. Please…
This sleek EDC (Everyday Carry) capsule gives you stunning two-tone aesthetics using a brilliantly simple snap-fit design. Whether you're organizing your desk, building a survival kit, or just need a stylish keychain stash, these…
This modernly designed Nespresso capsule holder is simply too good to not want to have at home. It holds a maximum of 21 capsules, stands securely without taking up too much space, and is quick and easy to print (no supports required).…
Nespresso changed their packaging on the virtuoline capsules without warning and made the old capsule holders worthless (the ones that hold the cardboard inserts) so I offer this version that works like the Classicline holders that you…
This is an improved version of Dolce Gusto capsule holder: https://www.thingiverse.com/thing:2847560 You will need: 1x base (0.20 layer height or above) 1x ring 6x capsule holder Depending on the total height you want: 220 mm height…
I wanted to design a stylish capsule holder for my Nespresso machine and came up with this idea. Started to sketch in Fusion 360. Later, i searched thingiverse, if something similar exists already and found this:…
ball soccer shaped capsule for multicolor printing recommended parameters: -wall 3 - 4 -supports 60° -infill 20%
This airtight capsule offers a reliable solution for safely storing essentials like pills, matches, and small tools, keeping your belongings secure in any environment. Compact, durable, and versatile, it’s the ideal companion for camping,…
Nespresso Vertuo Capsule Drawers! Inspired heavily by the two models mentioned below, I married their concepts into one amazing Nespresso Capsule dispenser. The pictured product features 4 drawers, but you can print as many or as few as…
For all the nespresso coffee capsules users Print Settings Supports: Yes Resolution: 0.2mm Infill: 15% Filament: Fillamentum Pla Extrafill Category: Kitchen & Dining
Humans began flying in space over 60 years ago. In April of 1961 Yuri Gagarin of The Soviet Union Air Force was the first followed by Alan Shepard of The United States Navy in May. Shepard flew in a Mercury capsule on top of a Redstone…
Very simple and functional dispenser allowing you to store 3 different types of coffee or cappuccino or not. The idea came up after seeing the absurd prices they ask for an item like this and also because of my stubbornness, I wanted to…
New original designed Rugged Capsule Filament used: Prusament PLA - Army Green & ESUN PLA Black In-fill: 15 % Support suggestions Support on build plate for the Capsule Support inside the thread and overhang of the hanger for the lid
Držák na kapsle Dolce Gusto
Great for festivals and concerts to carry earbuds, keep your tokens safe or simply use as a portable ashtray. Excellent conversation starter. Height: 10cm / Diameter: 3cm If you’d like to support my work, leaving a ♡ like ♥ or even buying…
Compact Capsule Filler with Credit Card Mixture Dispenser This compact capsule filler is designed to fill 24 capsules of size 00 in one batch using a credit card as a mixture dispenser. The capsule filler is made up of three functional…
Each model was printed on my P1S with 5% infill, 2 walls, and .2mm layer height. I have printed each model multiple times using different types of filaments with varying results. Printing with matte filaments had the best results, making…
Kitchen set part 3 : Coffee capsule Dispenser (Pisa Tower) Make your your coffee tastes more Italia Compatible with all diam. 37mm capsules (Nespresso, Doce Gusto,...) 3 dispensers holes Fill the capsule tower from above Print as many…
One of my kids recently lost his tooth, but we were out of plastic bags so I made a tooth shaped container for him to put it in. He was very stressed about how the tooth fairy was going to pick up his tooth, and this ended up being the…
Goes into Tomy Gacha gashapon vending machine
Modular The cupholder is modular and you can stack the module vertically as high as you want. To have a nice finish there is a top that you can optionally add. Installation The system is not fixated by itself, and is meant to be fixed to…
Here in France, a refill cartridge contains 8 capsules. The new design is now provided in 3 variants and sizes. Sizes / Capacity : • M : 9 capsules • L : 13 capsules • XL : 17 capsules Objects are optimized for a line width of 0.5 mm.…
Using test 1 and 2, check if your capsules fit properly. If needed, you can adjust the size using your slicer. 🌟💊 (edit The majority of users scale their prints to 103%.) With this handy 3D-printed device , you can effortlessly fill 50…
These are Storz and Bickel Dosing Capsule Magazine funnels and stuffers. With this tool you can fill up to 9 capsules of the magazine at ones. Update (New and updated parts are added): -Version 2 of the multi funnels for 8 and 9 capsules…
Summary Rebuild or create your own configuration of the Nakagin Capsule Tower today and celebrate its 50th birthday! This design is a 1:200 scale model representation of the famous Nakagin Capsule Tower (中銀カプセルタワー) found in Tokyo,…
---------- UPDATE AUGUST 2023 ---------- Added a printable O-Ring by @Das_Enzym_395842 Print it in a flexible filament like TPU. -------------------- Capsule for special cigarettes. Remix of "The Desperado | Waterproof Keyring Capsule"…
Remixed model of the Nespresso Capsule Holder from @mibla_44019 Removed the physical supports that were there in the original model since they were not useful and every 3d printers are capable to do the small bridges. I hope it'll be…
I designed this picture frame in Fusion360 to be customizable, print support free, snap fit together easily and feature a storage spot inside for special items. It is intended to fit a 4"x6" or 100mm x 150mm photograph. I used a piece of…
I just printed this on my Bambu CX1 with 3 outlines and 25% infill. The plunger works perfectly when just right, might need to scale slightly to get right fit, .1mm scaling makes all the difference.
Otimize sua experiência tres coracoes com este organizador de cápsulas personalizado impresso em 3D! facilmente acessível. Feito com precisão, este organizador não é apenas uma adição funcional para sua cozinha ou escritório, mas também…
You can mount this print under a cabinet with double sided tape or mount it vertically against your wall. When its mounted just slide your capsules onto the “railes” Print Settings Material: Pla Layer height: 0.30mm Supports: No Print…
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can…
A Dolce Gusto coffee capsule holder. The parts are held together by a 8 mm threaded rod and two nuts. The length of the rod should be 50 mm + 55 mm per section. For example with five holder sections the rod should be 325 mm. Print…
A Pill Pill capsule, or pill shaped screwable container. To be completely waterproof, an O-ring must be added. Inner diameter should be Ø14-Ø18.5mm. Thickness 2-3.5mm. There is also a version for use without O-ring. The watertightness…
This model was inspired by this design , but slightly more compact and with more options for numbers of columns. I also added some horizontal supports to make sure sure that the holder doesn't bend since the clearances are pretty tight…
Dosing capsule loader for POTV Lobo dry herb vape. Similar to (PAX) budkups, scraper can be used to push up capsules so lids can be put on.
Wanted a better spot to put our coffeecups. 6 holes for screws. Size: 230mm x 169mm holds 24 cups. Made my wife actually happy, it might be the reason she allowed me to buy the Prusa XL. Printed mine in PETG with brim.
A quite minimalistic holder for Nespresso capsules. Holds 5x4 capsules. Print instructions Prints without supports as is.
I took the liberty of remixing the model by: PRIma so that there was a little more space in it and so that the cap could be printed without supports if set correctly. Setting: Nozzle: 0.4 Layer: 0.2 Material: PLA, PET, and other Support:…
helldivers 2 deployment capsule, use it as a coaster, to distribute democracy as it should be with your energy drink or your beer, you have up to 4 coaster redeployments.If the model is accepted, I will make more versions that I think…
This is my holder for Nescafe Dolce Gustro capsules. I glued it (double-side tape) on side of fridge for saving space in kitchen. Double side tape is strong enough for weight of capsules. I made it from two pieces (Prusa MK3 working space…
This is an update of my original EDC capsule, after ditching the “EDC” part for being too pretentious. On the original, the clip was too small, and the flap was too weak. Fixed and fixed. In this little capsule, you can carry pills, a…
The Gemini capsule is typically modeled at a scale of 1/24. The larger you make a model, the more detail you can achieve. Considering the dimensions of the large parts and the size of a typical desktop 3D printer, a scale of 1/16 can be…
Printed on the BambuLab P1P with extrudr PLA NX2 black I used a standard profile with a layer height of 0,16 mm with an 0,4 nozzle and 15% infill. On the photo you can see that I forgot to add support elements at the bottom of the…
This is a square version of my Triangular Nespresso Capsule Holder ( https://www.prusaprinters.org/prints/20307 ). This capsule holders takes 20 Nespresso or Nespresso Compatible capsules. Print instructions This can be printed at any…
This is a smaller and cheaper replacement for the original filling system, see https://storz-bickel.com/en-us/filling-set-for-40-dosing-capsules I recomment to iron the upside of the hole-plate. 2023-08-25 Update: Fixed “Druckplatte.stl”…
My remix of http://www.thingiverse.com/thing:341809 Don't forget to like the original if you like this one! :) Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator (5th Generation) Rafts: Yes Supports: No Resolution: 0.20…
This is a filter capsule that utilise surgical mask and able to use 1 standard Surgical mask up to 16 times. If you are able to cut the surgical mask equally into 16 circles (38mm diameter) you can place it inside this capsule which can…
The Geometric Twist Egg Capsule is a sleek, egg-shaped container designed to hold small items or gifts inside. Its outer shell features a distinctive geometric pattern, adding a modern and artistic touch to its appearance. The capsule…
I created this little ‘’capsule'' to allways have with me some headaches pills. It's a nice EDC item to print for less than an hour and less than 2m of filament. Printed on a Wanhao D12, with ArianePlast PLA. PS: my printer who was nicely…
TL;DR : Recycle your Nespresso capsules. Easily, safely, hassle and mess free. Quick guide on how to use it: https://www.youtube.com/watch?v=yUxY0kESfBE (The unit featured is a prototype. Uploaded version have size adjusted propelly).…
Description Transform your coffee corner with this innovative Expandable 3D-Printed Nespresso Capsule Holder , designed to grow with your love for Nespresso flavors. Crafted with functionality and elegance in mind, this modular storage…
This is a capsule holder for the Nespresso Vertuo capsules. The assembly is made using an M8 bolt and nut as well as a 608 bearing and 8 4x1.5 magnets. I paused the print to place the M8 nut and magnets as shown in the last couple of…
Print Settings scale 100%+ for full detail 0.4mm nozzle 0.1 - 0.2mm Layer height no supports (if necessary add supports under engine pods) Assembly The heatshield and the latch ring can simply be glued in place with superglue. The hinge…
A Nespresso capsule organizer which can be attached to a wall or ceiling surface. This is a small variation from an existing model. I wanted to have an indentation to place a two side tape to make it “Invisible” This is a remix of…
Leave some memories to your later self or to the future. Place some letters, coins, gadgets etc. in it and put it in the attic, basement, dry wall or wherever. To make it waterproof, you might want to print a TPU gasket for the lid. I've…
holds 32 dosing capsules. enjoy! please show your print. Thanks
Capsule holder remixed from this one without most of the back side, so it shows more of the machine color and uses way less material. Can be glued directly or using properly shaped double sided tape. Thanks Peter for the original design…
EDC for 1 Pill (1mℓ or 1g) ∅10×20mm inner space — Emergency drug medication (optional seal ~ 12mm)
Hoi Poi Capsules from DragonBall. It cannot hold a house or a car, but it can hold small accessories. Print settings: Filament: PLA Layer height: 0.2mm Supports: no Perimeters: 2 Seam position: Rear Brim: Outer brim 3mm How to color…
FULL CREDIT TO cncartist ON THINGIVERSE. UPLOADING TO SHARE WITH THIS COMMUNITY. Summary Here are a couple threaded containers for miscellaneous item sizes. I chose the tighter threading for these as opposed to my other containers which…
Capsule holder for nespresso vertuo. It only has 1 side open, holds up to 6 capsules, but you can scale the length to get more or less capsules and make it fit for your needs. mine fits perfectly under an ikea wall cabinet.
Pocket sized stash capsule for anything you wish to keep safe and secure.
OK, I had to look up EDC – it stands for Every Day Carry. Things that are part of your personal daily kit. In this little capsule, you could carry pills, a band-aid, matches, emergency money, or a few precious sheets of toilet paper. It…
I used the Nespresso Capsule Holder by pcornelissen as a base for this Nespresso capsule holder. It is specifically tailored to the Krups Essenza Mini. I used 10% infill for the base and 0 for the cup holder part. Supports are only needed…
Requires to be printed diagonally on a large format printer (300mm x 300mm).
You will need to print the adapter part in order to join each egg together. Supports were used to print the Egg Shuttle Back, Cross Egg Top and Bottom, and Tear Egg Top parts.
Remix of https://www.thingiverse.com/thing:2864058 to fit on Prusa Mini and Prusa MK3s. Holds 24 capsule. No supports needed.
Its use is pretty simple and straightforward, if you know you know. This works for Storz & Bickel capsules and also works for the Planet of the Vapes (POTV) capsules that fit the Lobo, One, etc. I recommend printing “right-side up” for…
Comes with a stackable lid for the Rugged Capsule
I have created it because the other dispensers were consuming a lot of material, and they didn't work for all types of capsules. I had to make several models to get it right. .You can print multiple dispensers and join them with the…
This is an alteration of pumikachu's Nespresso capsule wall holder light to support magnetic attachment. I also did an adjustment to the bottom part for ease capsule release. Designed to use neodymium magnets with 6mm diameter and 1.5mm…