The source marked this model as adult content.
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
- Downloads
- 926
- Likes
- 433
- Rating
- 5
Counting matching models…
The source marked this model as adult content.
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
Motivation A while ago I published a pretty cool bottle opener gun which did win the Bottle Opener Contest. It Features accessory rails to mount lasers, flashlights or sights. However I was not able to find commercially available…
A communication badge from Star Trek Voyager. This a quick and easy print! The size and shape of this badge should be pretty close to the original TV version. Print instructions Should print in just about any material
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
Minimalist interpretation of the classic wave book stand design. Without any overhangs and optimized for good bed adhesion and small print beds Use a brim to prevent warping issues. It will be easily removable due to the round design.…
Print approx. €10.76–€13.15 excl. taxPreliminary estimate for one variant
A rugged appearance is cool handle. Fasten with two screws. Print Settings: Material: PLA Layer height: 0.30mm Supports: no Perimeters: 3 Infill: 20% My Other Handles: https://www.printables.com/@BaGooN/collections/1174222
Print approx. €1.39–€1.69 excl. taxPreliminary estimate for one variant
This inexpensive 3D printed smartphone stand will allow for a smartphone to be held up while it is being used as a magnifier. This phone stand may be beneficial to someone with visual impairment or someone with limited finger dexterity as…
Aus 2 bestehenden Modellen habe ich mir ein passendes Teil "gebastelt". Passt auf eine Dose mit ca. 57mm Durchmesser. I “made” a suitable part from 2 existing models. Fits a can with approx. 57mm diameter.
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for PETGSource material: PET
This model is photogrammetric scan real object light border fortifications Czechoslovakia - Object {A(2)}/326/A-140Z Source object: Database: http://www.ropiky.net/dbase_objekt.php?id=1075729010 Coordinates: 50.1545308N, 16.5320894E Print…
Print approx. €15.15–€18.52 excl. taxPreliminary estimate for one variant
The mount is stiffer - the pins that the screen slides onto are still not sized correctly (need to be shorter and wider) so the screen is a bit loose on the mount. I fixed this quick by putting a few pieces of thin foam tape on the screen…
If your MEC 600Jr Mark V is mounted to an Inline Fabrication Quick Change plate, you've probably noticed that the spent primer catch tray that comes with the MEC does not fit properly because the rear-right mounting screw that comes with…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
I made the tolerances tight enough to not rattle around when together, but not so tight the rings are impossible to separate after printing. There's a 5mm hole through then entire thing in case you just want to keep the rings together…
This collection of bird heads with different beaks is used to teach young people with vision impairment about the different beaks a bird can have. the collection contains a head of a hawk, a dunlin and a seagull which all have different…
Print approx. €6.14–€7.50 excl. taxPreliminary estimate for one variant
This is a 3D printed version of the KM Tools Card Scraper Vise and Honing Guide as described in their downloadable plans and YouTube video “ Card Scraper Sharpening Jig - Gorgeous Shavings - Free Plans and Free Hardware.” with an…
Print approx. €9.45–€11.55 excl. taxPreliminary estimate for one variant
Unable to find the locating pin for changing the timing chain of a BMW K1200 I decided to model it myself. Parts number are: 83300401482 and 11 1 842 I tested it myself without any issues with the following configuration: Material : PLA…
This is a design for modifying a COSORI 11.62" Food Dehydrator CFD-N051-W; 350W--will NOT fit the Cosori CFD165FD 13.8" 450W model! . The shell allows drying two spools of filament at a time. I used Polymaker Transparent PETg. On the…
printed in pla, coloring is happend in prusa slicer;
Ducati Panigale V4 S Corse Superbike Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Print approx. €1.76–€2.15 excl. taxPreliminary estimate for one variant
Arken EPL-4 Scope Magnification Wheel. Hardware required: M3 x 5 Socket Head Screw
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
Der Halter wird unter das obere (nur drauf gesteckte) Windschild montiert. Dazu das Windschild nach oben aus den Gummis ziehen und die 4 darunter liegenden Inbusschrauben entfernen. Darunter den gedruckten Halter, ggf. mit 15mm längeren…
Print approx. €9.77–€11.94 excl. taxPreliminary estimate for PETGSource material: PET
Atakule is a 125 m (410 feet) high communications and observation tower located in the Çankaya district of central Ankara, Turkey, and is one of the primary landmarks of the city. As the district of Çankaya is itself on a hill, the tower…
Print approx. €3.79–€4.64 excl. taxPreliminary estimate for one variant
A sight mount with picatinny rail, that fits to the Novritsch ssp18 airsoft pistol. Material: PLA Nozzle (what I used, works well with others):0,6mm You don't need any other parts than the screw, that holds the stock sight in place. I put…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
These food identification sticks are designed to help guests with allergies or dietary restrictions easily identify dishes at gatherings. Simply insert the sticks into the plates to clearly label the food. This eliminates the need for…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
Print it with the cylinder heading upwards. Supports needed only on unvisible surfaces. V1 - Original Turnigy antenna V2 - Antenna with SMA Connector (WiFi) Print settings: Layer height: 0.2mm Top Layers: 7 Bottom Layers: 5 Supports:…
These educational plates are designed to help students easily distinguish between hard Y and soft I in spelling exercises. They serve as a simple yet effective learning tool for recognizing the correct usage of each letter, making them…
100x160mm sign, reading "Instant Gratification takes too long" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . If you…
Print approx. €1.60–€1.95 excl. taxPreliminary estimate for one variant
PL Jest to modyfikacja spodniej części obudowy (tej z wtyczką 230 V) zdalnego sterowania centralnym ogrzewaniem firmy Tech sterowniki ST-292 v2 (występującą też pod nazwą Termet). Modyfikacja polega na usunięciu wtyczki 230 V i…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Dieses Modell ist ein selbst entwickelter Vorfilter‑Halter. Die Pumpe wird in das gedruckte Bauteil eingesetzt und anschließend gemeinsam mit dem Halter in einen kurzen Feinstrumpf gesteckt, der oben mit einem Band locker verschlossen…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
A double-sided tool designed for easy cleaning and lubrication of Z-axis lead screws. One side features grooves shaped to match the trapezoidal thread, allowing the tool to follow the screw profile and evenly spread grease along the…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models of the series in this collection => [Mechanical Mechanism Examples] This set…
Found this amazing model of an Ender 3 v2 to make mods for. This will save you lots of time and headaces. This STEP file allowes you to make designs for the Ender 3 v2 without having to mesure everything on the machine. I used Fusion 360…
Since I only found Picatinny rails with imprecise dimensions on the Internet, I decided to print a new one from the dimensions given by Wikipedia. I have also saved the f3d file so that you can start your own projects with this rail.
NO MORE kinked tubes, broken filament or issues loading or unloading. This is a NEW version of my other riser that now has an incorporated slot to relocate the PTFE tube through the riser! Also has a larger relief on the back corner to…
I am asking for your help. If you see problems with this aggregation, then please leave me comments. If you think all is pretty good, then please click the “like” button or leave me comments as well. Thank you in advance. This is intended…
Minor Update - 14 Feb 2025: 3DBenchy model restored to the package now that it is in the public domain . Major Update - 21 Jan 2025: The Modular Wind Tunnel for STEM Education and its accessories are now FREE and published under a license…
Why Just a simple picatinny mount that you can use to mount anything you like. Use it as a starting point for your own designs....or just print it and glue something to it. Maybe you've always wanted to mount your wisdom tooth to your…
I upgraded my Voron V2.4 with a CAN-toolboard. To fully replace the x and y drag chains, it is necessary to relocate the X and Y endstops. For X, there is a mount at the back of the toolhead carriage. For Y, it's common to move the…
Edit 09/02/2020: Added clip 6 (hexagons). Edit 03/21/2020: Added Clip 5 and modified all to remove the need for support. Individual slot covers for picatinny rails. 4 different styles.
This is a simple box to put a communication board of the JK-BMS inverter BMS (model JK-PB2A16S20P) that I use in my DIY solar energy storage system. Letters on the box could be filled by the nail polish or sealant to make letters stand…
Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…
Parametric Nato/Picatinny Rail and Clamp Provides rail with n slots either with or without base body. Compatible with Weaver rail. OpenSCAD source code included. Designed to have minimum of elementary bodies for efficiency with i. e.…
AutoCoupler Cutaway educational model of an automatic coupler designed for 3D printed model trains. The coupling can be disengaged with very little force. Original Auto Coupler Check out the Dragon Railway ecosystem! Join our : Discord If…
This is a modular system with which many kinematic chains, aka robot arms, can be constructed. The modules can be seen in image 1. The chosen actuators are very cheap servo motors without gearbox, which brings advantages and disadvantages…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples series on 80mm x 80mm base plates. You can find all models of the series in this collection => [Mechanical Mechanism Examples]…
G17 rail to Picatinny adapter, for when you want to fit a pic rail only item or mount. Gives you 5 slots. Made it as low-profile as possible while still maintaining the correct picatinny dimensions. Fitted for Gen 4, haven't tried on…
Designed to be printed and used for teaching proper brushing, flossing, and water pick techniques. Gaps between the teeth will allow full demonstration of flossing in particular. Model in the photo is printed at 200% of normal adult size…
This is a remix of Picatinny Rail Riser 20mm by DNeves . An airsoft Picatinny rail riser to set accessories such as red dots and scopes 20mm higher. Remixed to fix rail width and include M3/M5 slots. The original model had a great design,…
Print upside down. Smaller one is more versatile, larger is a bit tighter and may not fit all picatinny, especially printed picatinny that might be slightly oversized. Two 6-32 screws.
more compact form / rigid 15%infil+ the better 3 layers 0.2 lay flat and add supports on the back of the screen holes
Learn how positional vertigo works by watching the crystals (aka "otoconia" or "otolith") fall and move through the semicircular canals of your inner ear anatomy with this educational model. We developed this anatomical model to promote…
Планки пикатинни и зажим для них, под свои модели. Category: Sport & Outdoors
This is a roller bearing style spool holder that replaces the oem spool holder, in the same location as stock. it will accommodate standard size spools up the 75mm wide with a 40mm or bigger hole diameter. The roller and the body each…
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- E3D V6 hotend section to show how a hotend…
If you've ever thought of upgrading your printer to dual Z drive, you've probably run into the problem that the power supply is in a very bad place. This simple little model will help you move the power supply under the heated bed. It…
Warning: this mod is experimental and needs engineering and mechanical background to build. No guarantee and very little support provided by me. This is a modification you can add to your MK3s to be able to print 90° overhangs without…
Print the feet in as soft TPU as you can, I printed mine with 60A TPU from Recreus, the softer the better the grip. The M3 screws will thread itself. BOM M5x20 2pcs - For legs M5 Locking nut 2pcs - For legs M5x40 1pcs - For picatinny M5…
Created a M-LOK Picatinny rail, to mount accessories to your firearm. To attach, you need to buy the screws and nuts, either directly from Magpul or from aliexpress or where ever is easiest for you. You need 2 screws and 2 nut to attach.…
This is a modification of the ubiquitous PS5 controller mini wheel add-on by pixel2: https://www.thingiverse.com/thing:4693372 Here is a video of it being printed and operated: https://youtube.com/shorts/xQ8_doe1zzo My modification…
STANAG 4694 NATO rail for mounting firearm/paintball/airsoft accessories (scopes, lights, etc). Backwards compatible with the older MIL-STD-1913 (Picatinny) standard. Open the file in Fusion360 and edit "User Parameters" (Modify -->…
Introduction: This is yet another educational model of a rack and pinion gear. My daughter had to give a presentation about this type of gear at school and we did not find a model that met all of our criteria: big enough (also the teeth)…
This is a remix of MrTeliP and Voron 2.4r2 PG7 Cable Gland and Endstop, which was a remix of jphalip's and Hartk's PG7 mount. I added a new endstop mount so you don't loose any Y print area. The bumper of this mod from Cris Persi is…
Hi Folks! Thank you for your patience. It’s been quite a long journey developing the FlexATX version. I had to wait for another BC-250 board to arrive because my previous system suffered a brownout after I accidentally caused a short…
Picatinny Rail Risers in 13mm, 19mm, and 25mm. prints in orientation as provided without supports (standing on end) bolt hole is covered by a thin membrane to improve print quality, must be drilled out post-process PETG recommended as…
To assemble it you'll need 1 m3 by 20mm and 4 m3 by 30mm socket head screws, 1 self locking m3 nut and 2 normal or thin m3 nuts and 4 m4 by 6 set screws To adjust X axis turn the screw on the rear post To adjust Z axis position the yellow…
Redid my angled foregrip for M3x25 screws and hex nuts. Hangs on to the rail much, much better now. There are long and short versions here.
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models in the series in this collection => [Mechanical Mechanism Examples] This model…
The original Shade Foregrip had wide top brackets so it would clamp down securely to Nerf-Rails. However this prevents it from being mounted to certain low-profile Picatinny rails (for example the one found on Worker Retaliator pump…
Flash Forge Adventurer 5M (AD5M) Fan noise reduction Hot end. Best Modification Reinforced weak areas in the print. (fail areas) Can be printed in standard PLA. The front section thickness increased. Front-facing plate has room for your…
These models are directly from Elegoo, they are replacement parts/upgrades for their FDM printers. Some of these come preloaded on their usb drives. I've pre-ordered a Neptune 4 Pro and will post prints once I have it! Elegoo Neptune 2,…
If you have an umbilical that goes all the way from the toolhead to the electronics bay and can't be bothered to redo the wire path, these cable cutouts let you just slip the existing wires into the endstop relocation mount. I've attached…
---------------------------------------------------------------------------------------- Description ---------------------------------------------------------------------------------------- A pair of nice and simple picatinny attached…
================================================== ELEGOO CENTAURI CARBON - TOP PLATE RISER & CANVAS DOCK SYSTEM ================================================== 📝 Overview & Core Details Description: A custom riser that lowers the…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
Print this with supports to the build plate only to handle bridging on the underside of the p-rail attachment area. PETG or PLA+ recommended for durability and heat resistance. Affixing AFG to Picatinny Rail: Vertically, you can affix…
To build one, you need Attachment print (either pic center or hole center) Stock (m3, m3 w/ heatset, or 4-40 x 3/8 screws) in either normal or short lengths Matching buttplate to the stock chosen 2x 10-32 nuts (Imperial Mounting) or 2x M5…
Disclaimer : I made this as a shitpost, I didn't expect it to be particularly useful, and somehow it's been found usable nonetheless. I imagine there are better designs, but thank you for considering mine regardless. Foregrip I designed,…
So, this is my version of a Linear Rail Prusa Bear. Thank you to Grégoire Saunier for his fantastic work on the Prusa Bear, as this provided me with a fantastic starting off point. This will continue to be added with details, but the…
The “Knockout” Angled Foregrip design! This foregrip gives a different, unique feel when pulling the gun into your shoulder and controlling recoil! ///This cannot use the MMS Quick Release Pins! This needs actual hardware!/// It might…
3D Printed Telecommunication Tower (1:100 Scale) Description: This meticulously crafted 3D model of a telecommunication tower, scaled down to 1:100, is ideal for 3D printing enthusiasts. It faithfully replicates the design of a real…
S ummary: Four piece ergonomic handle to securely and safely hold reciprocating (Sawzall) blades. Uses three M4x16 machine screws and nuts. Hardware Note: Before printing be sure to select the correct “Right Handle” for your hardware. One…
version 2 is out and its smaller then ever!! Introducing the super cool Quick-Release Picatinny Rail Mount, a game-changer in the world of firearm accessories. The quick-release allows for easy changing of accessories or adjustment on the…
I designed these picatinny rails as a design exercise, but they could be useful to someone :) I've included a technical drawing from the MIL-STD-1913 standard that these rails are modelled after. Support If you'd like to support me for…
this is a robust foregrip/handle for picatinny rail
This is an educational clock to teach the analogue clock. Also interesting for lovers of clockworks or gearboxes ;) Completely printed without supports, no need for glue or screws either! Also fits onto the Prusa mini (: The hour- and…
-remixed model - stronger and more massive body, resized bolt and nuts holes, remixed foots //3.1.2023 now printing model for test //4.1.2023 tested result OK, added photos. -Hardware needed: M6x20 2pcs - For legs M6 Locking nut 2pcs -…
Are you looking for a quick, convenient way to put a Picatinny rail in an OpenSCAD design? Do you want to generate a standalone rail with ports for mounting it with screws? Hopefully you do, because that's what this does. There's two…
Edit: 09-May-2023: Part #3 added: Before I printed my spooler I dragged every part into TinkerCad, an assembly. Two parts I remodelled marginally: The big base part was reported to be poorly fixed on your workbench, so I extended the base…
Liked? Like for the sake of decency, do you think it’s easy to create modifications? Modification for belt tensioner Creality K1, K1C, K1 MAX Gives greater stability to the tensioner; with its help, possible distortions are eliminated.…
PRINT W/ SUPPORTS!!!!
Just a test of my modelling abilities. Works well. I basically wanted something that would print very nicely. Requires 2x M5x30 bolts and M5 nuts. Print Settings Printer Brand: Creality Printer: Ender-3 v2 Rafts: Yes Supports: Yes…
Background I recently got a xTool S1 laser machine and was looking for a solution to get rid of the exhaust gases to have the machine run in my flat. Idea I checked the most common resources on the web and found some window exhaust…
22mm picatinny rail adapter to use in 11mm rail. Needs: 1x 20mm m3 screw 1x m3 nut
Mounts an action camera to either the right or left side of a picatinny rail. Record the action of your next paintball, airsoft, or 3-gun match. Requires a 10-32 nut and 1.25" bolt to attach to the rail, and an M5 nut press fits into the…
Just about everything should be able to be printed without supports. Material of choice can be used, but I'd recommend something on the order of PETG strength or greater given the nature of hex interfaces. Interlocking dovetails of the…
Update: added an optional taller version by request Why I have T1-style red dot that sits very low on the rails of my airsoft replica's. This print raises your sight by ~32mm which is perfect if you're using goggles/helmet/mesh covers.…
This is a simple faux scope. Basically, a fancy tube with a crosshair and some picatinny brackets. There are three crosshair options, two different lengths, and adjustable picatinny bracket spacing. Changelog: 5-18-2024: Release.…
This is a model of the Advent House from Chevy Chase’s movie Christmas Vacation. It was only used in a couple of scenes, where opening the windows was used to mark the passage of time in the movie. The body of the main house can be 3D…
Sidewinder X1 Bed Side Cable Chain Relocation Preparing to put my Sidewinder inside an enclosure I was not happy with the space taken up at the back of the printer by the bed wiring and needed a solution to fix the kinking from the stock…