CENTER MARKER - CENTER FINDER - (Tested)
Easy to use Easy to print
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 9,409
- Likes
- 2,961
- Rating
- 4.94
11,155 models
Easy to use Easy to print
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of https://www.thingiverse.com/thing:1213459 My appologies to the original designer for not including the link to his model originally, as I was unable to locate the original when I posted. For use as a Center Finder;…
Print approx. €1.59–€1.94 excl. taxPreliminary estimate for one variant
Easy to print - center and quarter markings 2 sizes 120 mm 150 mm I made somme adjustmets so the partial marking are now correct. I want to mention https://makerworld.com/en/@fmod for the clear explanation. You can also follow him on…
Print approx. €1.88–€2.30 excl. taxPreliminary estimate for one variant
Nativity Scene from scan of decoration.
Print approx. €29.63–€36.21 excl. taxPreliminary estimate for one variant
EU License Plate Holder done in Inventor, and printed on MK3S+ in ASA.
Print approx. €4.61–€5.64 excl. taxPreliminary estimate for one variant
The new center marker, now with ruler incl. and a more robust design !!!
Print approx. €4.02–€4.91 excl. taxPreliminary estimate for one variant
A parametric car/motorcycle license plate key chain designed to be printed on single filament printers with color change. Add a filament change in your slicer and swap the filament mid print in order to achieve a two color print. Features…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Easy-Install Hinges for Your Centauri Carbon Side Panel Tired of removing the whole panel just to get inside your printer? These side panel hinges let you swing open the right-hand panel of your Elegoo Centauri Carbon like a door, so you…
Print approx. €4.01–€4.90 excl. taxPreliminary estimate for one variant
A simple caliper design to measure objects up to 15 centimeters :) happy printing
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
BMW E39 - Sliding cover for the central console storing partition of the BMW E39 Model. Suitable with part number oem 51
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
Dragon Incense Burner. Make sure to place incense cone atop something non flammable like a large coin. Half dollar works well. This is a finer/detailed version of an older model I made. Suitable for resin printing as well.
Print approx. €24.05–€29.39 excl. taxPreliminary estimate for one variant
This model is originally from Tingiverse, made by Printer2261 also known as Shane Jackson. https://www.thingiverse.com/thing:5172136 But I thought that users of printables would also like to be able to print this, since the Tesla Model Y…
Print approx. €8.62–€10.53 excl. taxPreliminary estimate for one variant
Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
Cupra Born has some big trays to store things. But it is difficult to organize cards, pens, coins for shopping carts etc. So I first tried the model of Sven Van Opstal at Thingiverse to insert in one of the cup holders. In my case it had…
Print approx. €7.61–€9.30 excl. taxPreliminary estimate for PETGSource material: PET
Here you have another large 80cm filament print of a robot. This one is based on the Cylon character “Centurion” from the Battlestar Galactica movies and series aired in the 70ies & 80ies of the last century. The original 3D model was…
Print approx. €16.10–€19.68 excl. taxPreliminary estimate for one variant
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
Two tanks with a hole for a keychain Centurion has a rotating tower Print in place few supports needed scaleable 25-40min print time, PLA, layer height 0.3mm
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
111mm X 84mm Drill Gauge: 9.00mm M3* 12mm and M3 locknut
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
This Mid-Century Modern Acoustic Phone Amplifiers uses a cone shape to naturally enhance the existing speakers on your phone. No hardware required, all dovetail slip-joint connections. The only component that requires any kind of support…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Place a rubber mat behinde the mount and under the hooks. Then the Display is secured from scratches and the mount is not moving. Take superglue to put the two models together.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
Are you a Prusa 3D community member and proud to show it to everyone? When you are sitting in traffic, make sure everyone knows you are going home to the best printer out there with this Prusa 3D license plate holder. Sized for US license…
Print approx. €4.12–€5.04 excl. taxPreliminary estimate for one variant
Toolholder for wall mounting your festool centrotec and fastfix attachments. If you only plan to hang your centrotec attachments, you can just print the first part. If you plan to use the fastfix part you should print the second part.…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
If you've got a set of wheels that have somehow lost their centerpiece or the plastic tabs have broken off, then this Porsche Wheel Center Cap is a perfect replacement; Print as is or customize it with your own logo/text. It has a 77mm…
Print approx. €1.64–€2.01 excl. taxPreliminary estimate for one variant
Toyota Prius center caps to suit factory rims - PLA
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
It' a Double P-top for Bora Centipede.
Print approx. €3.04–€3.71 excl. taxPreliminary estimate for one variant
Ding Censer ID no.: MNK VI-NN-33 ab Fixed for printing. Separate lid / cover with holes for release of smoke. Bottom only hollowed out to base of neck. Feel free to use a boolean difference to hollow it out even more. UV Textures added…
Print approx. €29.87–€36.51 excl. taxPreliminary estimate for one variant
Bouchon lave-glace de remplacement pour Renault Scenic III phase 2 (2012 dans mon cas). Le bouchon a un diamètre de 50.5mm, il pourra se visser et rester en place. Parfois un peu de mal au début à trouver le bon angle, mais ne vous en…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Better to print it in PAHT-CF (or ABS) for better resistance to summer heat! (not in PETG or PLA)
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Technic Beam 7 x 5 with Open Center 5 x 3 64179
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
This stand is designed to accommodate 44 1.5 ml and 30 0.5 ml Eppendorf-type microcentrifuge tubes. Multiple stands can also be stacked on top of each other, making them ideal for storing a large number of samples. The stand was designed…
Print approx. €8.89–€10.87 excl. taxPreliminary estimate for PETGSource material: PET
6-5th century BCE silver coin from the Greek city of Cyrene : Silphium and Magas
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
Update 02/28/25. – A few people have had issues with this fitting their vehicle. It was designed to fit my Nov. 2023 R1S VIN 23 XXX. I don't know whether this is related to a change in the tow hook size by Rivian in later builds or a…
Print approx. €6.83–€8.34 excl. taxPreliminary estimate for PETGSource material: PET
Its a Bookend for Bookworms or fans of the Light Novel/Manga/Anime Series: Ascendance of a Bookworm By Miya Kazuki
Print approx. €6.38–€7.79 excl. taxPreliminary estimate for one variant
BMW E46 Center console bin with retractable charger. Extra things you need: Sandpaper/paint if you want to make it need. Retractable unit from a retractable 12v car charger from Aliexpress.…
Print approx. €35.40–€43.26 excl. taxPreliminary estimate for PETGSource material: PET
Made for my boyfriend. No supports.
Print approx. €4.18–€5.10 excl. taxPreliminary estimate for one variant
Designed this to fit my 2020 Ford Ranger Center Console since it does not come with one. Printed in PETG to withstand the hotter temps in a vehicle.
Print approx. €14.16–€17.30 excl. taxPreliminary estimate for PETGSource material: PET
A practical translucent case for the popular esp8266 microcontroller. USB power outlet is kept free. Print instructions Best print with PLA natural for shining through leds. Read more about useful 3D Print life hacks in my ebook:…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
Center Drive Roller with One way slip gear for Filamentalist Rewinder
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Note: Non-Magnetic Version Also Available Note: Non-Magnetic Version Also Available Valentine twists on my minimalist magnetic incense holder. Perfect for a little home decor. Easily swap the incense stick and align the incense stick back…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
This mHct microhematocrit carrier is designed to hold 75mm capillary tubes for use in a centrifuge accommodating standard 15mL tubes. It's an improvement on the design included with the USA E8 Combination Centrifuge (whose original…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET
Introduction and Use Case This is a replacement for the wheel cover center provided by Tesla and other vendors for Tesla Model Y and perhaps other Tesla models. Printing I printed with two colors using PETG filament and began with yellow.…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for PETGSource material: PET
Precision Centre Finder Centering Square 120mm Gaging Center 160 x 132 x 20mm
Print approx. €3.26–€3.99 excl. taxPreliminary estimate for one variant
A remix of the original model (linked below), I wanted a simple one-click print solution for an infill-percentage swatch. Print in two colours to get the nice effect! Solidworks model is also included should you wish to modify it further.
Print approx. €2.42–€2.96 excl. taxPreliminary estimate for one variant
My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Für 1.9" Beadlockfelgen Nabenabdeckungen. Mit einem M12x1 Gewinde. Nutzbar für viele unterschiedliche Felgen die ein entsprechendes Gewinde haben. Kann zweifarbig gedruckt werden oder einfarbig. Druck: PLA 0,4 Düse 0,1 Schichten mit Raft…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Will print without any support. Optional front fascia will need to be glued on.
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
Centre marker tool set 120 and 160 mm width, 3 models included, with ball bearings and several guides. The thumbscrews are also included but you may use your own steel screws if you like. I also created a set of guides to keep the marker…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET
Some cool Aperture Science Wheel Center caps. I would advise to print in PETG and maybe Anneal it afterwards. Worked well with my MMU2s. I also printed really hot so that the layer Adhesion is good. The Stringing doesn't matter since it…
Print approx. €6.86–€8.39 excl. taxPreliminary estimate for PETGSource material: PET
Condescending Wonka Meme Made with gwen image edit : Huggy Face and Flux 1 dev upscaler. x2 before the gwen and after. Tripo for image to 3d generation. Using gwen image edit is slick you can put the incomplete pic from the meme jpg and…
Print approx. €2.53–€3.09 excl. taxPreliminary estimate for one variant
Center caps with a Chevy theme. Tricolor and single color print files.
Print approx. €6.95–€8.49 excl. taxPreliminary estimate for one variant
A very simple incense stand for palo santo . Whilst the stand works for all palo santo pieces I've tried, I imagine the shapes and sizes can vary wildly. Please check the drawing prior to printing. Usage Press the piece into the grip…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Upper part of the organizer set
Print approx. €3.36–€4.10 excl. taxPreliminary estimate for one variant
The basic clock face by @WildJoker was a great place to start, but an image on the Internet called out to be added, and I think takes this clock to a new level. Updated: 09/02/2023 to fix an error. Updated: 09/05/2023 added photograph of…
Print approx. €7.05–€8.62 excl. taxPreliminary estimate for one variant
Remix of MMU3 Spacer for MK4/S frame. End of spacers was mofified to be wider to be able to fit on MK4/S frame. Update: added locks to hold spacers in place Thanks for the original design...
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET
This is the next in my sequence of printing in colour. It leads on from three earlier Xmas prints. Progress has been achieved in getting a correct colour balance -the palette is limited to 220. Prints size is to a resolution of 0.35mm. I…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
This is meant to go over the "ugly" side of the pc fan so you don't have to see the model numbers, text, etc on the back
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Precision Centre Finder Centering Square 90mm Gaging Center 140 x 100 x 20mm
Print approx. €3.01–€3.67 excl. taxPreliminary estimate for PETGSource material: PET
This is my first model of a Naval Canon made in and around thw 18th Century. I used reference images in order to make this, and this is my first attempt at doing so in Blender. I would have liked to put wooden textures on to the frames,…
Print approx. €2.56–€3.13 excl. taxPreliminary estimate for one variant
Wanted to use my Centrotec bits with my Milwaukee Drill. Made an adapter. There are 3 parts to print. I started by printing all in PETG but ultimately printed the main part in stainless steel via Shapeways here . The other 2 parts (the…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
The Censer of Celestial Auspice Origins in the Ming Dynasty (1368–1644) The "Censer of Celestial Auspice" (天祥爐, Tiānxiáng Lú ), is believed to be a rare example of a bronze ritual censer commissioned during the opulent mid- Ming Dynasty .…
Print approx. €14.21–€17.37 excl. taxPreliminary estimate for one variant
Combination square and center finder has dedicated center hole contoured for pencil to rest nicely. Pins for center finder are stored on square when not needed. Square measures 5-¼" x 3-¾" with thickness of ¾". Pins extend ½" from body of…
Print approx. €2.86–€3.50 excl. taxPreliminary estimate for PETGSource material: PET
Licence plate holder for small german licence plates. ("Versicherungskennzeichen"). Fits on electric motorcycle Ubco 2x2. The four holes with the wider spacing are suitable for Ruthex M3 threaded brass inserts.
Print approx. €3.13–€3.82 excl. taxPreliminary estimate for PETGSource material: PET
This is a candle holder that holds 4 small candles.
Print approx. €4.72–€5.76 excl. taxPreliminary estimate for one variant
So this is just a remix of ababemilo's excellent Cylinder Center Finder . However, my minor twist was putting a name on it. “Why” you ask? Well, so my family members don't throw it out in the trash not knowing what it is. If you're…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for PETGSource material: PET
I still really love the 2008 Tundra, but being someone who uses the sliding tray in the center console a lot i but i always seem to have more than will fit in it, tape, wallet, code readers. So i added a second layer to the bottom. This…
Print approx. €13.50–€16.50 excl. taxPreliminary estimate for one variant
Simple stencil best used with a brush. I wanted a stencil that was sturdy enough to be handled without breaking that could double as a radial scale for quick visualization of size. The rings are 25, 50, and 100mm diameter circles. Has two…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for PETGSource material: PET
This custom horizontal phone holder is designed for the Fiat Grande Punto , offering a stable and centered position for your smartphone — perfect for navigation or music control without side distractions while driving. Originally designed…
Print approx. €2.11–€2.57 excl. taxPreliminary estimate for one variant
American Express Centurion Logo Centurio A centurion (/sɛnˈtjʊəriən/; Latin: centurio [kɛn̪ˈt̪ʊrioː], pl. centuriones;
Print approx. €10.97–€13.41 excl. taxPreliminary estimate for one variant
Basic Stand for the stock Decent espresso portafilter wich can be mounted on a grinder especially the Niche Zero. This remix adds a hole into the base plate of the stand, so it can be screwed onto the base plate of the Niche grinder or…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for PETGSource material: PET
If you have or know someone who has a meade lxd55/75 SN10" and needs to center the secondary, I provide you with the 3D files of these parts that allow you to set the concentricity and rotation angle of the secondary mirror with great…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
Print 2 sides, rubber band together, fill with silicone, you can make incense cone molds!
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
A wall-mountable dispenser for 0.50 € cent coins. Easily accessible by swiping the coins out from the bottom. Scale shows the amount of money in €. Attach to a wall with adhesive tape. If you are interested in modifying the model to fit…
Print approx. €7.19–€8.79 excl. taxPreliminary estimate for PETGSource material: PET
I found releasing and fastening blades on my scroll saw very annoying, when using the original lock nut: Rotating the nut takes ages and when fastening the blade, you always have to find the right position to achieve the correct tension…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
Discover the strength and courage of ancient Rome with this 3D model of a Centurion Gnome. Perfect for lovers of history. The spear and the lighthouse are included, more accessories will be added later.
Print approx. €1.72–€2.11 excl. taxPreliminary estimate for one variant
Billowing Dragon Incense Burner
Print approx. €6.12–€7.48 excl. taxPreliminary estimate for one variant
Hello there. I designed a ukulele shaped like a crescent moon. The name Luna is Italian for moon. If you are interested in 3D printing one, make sure you have a set of geared tuning pegs. Please enjoy. Which version to print? I highly…
Print approx. €12.45–€15.21 excl. taxPreliminary estimate for one variant
Have you lost one of your front license plate mount brackets on your Tesla? Well, I did, so I designed this replacement part so that I could put the front license plate back on. I tested it, and it worked well, so I am sharing this to…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
Decided I want to pimp my Prusa MK3s+ up a bit so I hit it with the the Wu Tang treatment. It saddles over the top of the frame, with room for the factory Prusa spool holder to fit. Printed in PLA 0.40mm nozzle 0.15mm layers print face…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for one variant
This is a very simple license plate adapter that allows you to mount most US motorcycle license plates on bikes directly imported from Japan, like an MC22 CBR250RR, for example. The model only comes with one side of the adapter. Please…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
I also needed to somehow solve the holder for the grinder. So, with permission, I adapted the original author's design @kerngebiet. I'm not very good at modeling and I had a hard time modifying the model in Tinkercard. But for my purpose…
Print approx. €3.32–€4.06 excl. taxPreliminary estimate for PETGSource material: PET
Printed in PETG. 0.4mm nozzle. 0.2mm layer height. I whipped up some hangers that fit perfectly on the .25" in front bar of the Elfa shelving I have in my office.
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for PETGSource material: PET
This is Wheel Hub Centric Rings Front and Rear for all 1982-1992 Camaro and Firebirds that are using Corvette Rally Wheels. These should fit original and aftermarket rally wheels. Printed on a Prusa Mk3s+ machine in ABS with fan disabled…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
About A flat cover for the center console of Yaris NG Hybrid (tested with 2023 model, might fit others). Our dog enjoys squatting on the center console but sometimes presses the various buttons located there. The cover hides the buttons…
Print approx. €4.35–€5.32 excl. taxPreliminary estimate for PETGSource material: PET
Stand that holds up to nine (29 mm diameter) tubes of effervescent tablets. Models for 4, 6 and 9 tubes are included. A small testprint is included so you can check if the printer tolerances will allow for the tube to fit. The diameter of…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
The Battle Front 1/100 Centurion tank sprue gives parts to make either a MKI or a MKIII tank. They both use the same hull. All the parts are there to make the turret for both versions except they only give you one turret base. I wanted to…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
I little watch that i am trying to make look like the one in descendants 4.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
These pieces have been scanned then modeled and should be reasonably dimensionally accurate to the originals. The original release included a rather odd 10.125" square checkerboard which I have also modeled and included as a multicolor…
Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant
The model consists of five main components, each serving a crucial role in the assembly process. These parts include the TPU tip and wire cover, the ABS fan and exhaust tube, and the PETG tube. Due to printer limitations, the chosen…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
While I love the Onecent extension leads for my Desks, it cannot connect certain adaptors like the MacBook Pro Charger, that hits the desk without raising the extension lead. These little feet go under the extension to raise it just…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
I saw some other frames with the same idea but they all had 2 issues: (1) they covered up the State and lettering at the bottom of the license, and (2) they didn't enclose the license plate edges. This design provides more sturdy…
Print approx. €3.43–€4.19 excl. taxPreliminary estimate for PETGSource material: PET
Rarely used Nacs adaptors were taking up valuable real estate in my driver door compartment so with this mash up they are now neatly stored in my center console as part of the supports for my printed shelf system.
Print approx. €19.46–€23.78 excl. taxPreliminary estimate for PETGSource material: PET
After printing, use a melt gun to bond with the vial. The melt gun is actually the great-grandmother of the 3D printer. :)
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
Please note that by using express printing, stringing issues are more likely to accrue, blasting breathly with a fire torch is recommended.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
Deutsches Beispiel EU-Kennzeichen "CORE ONE L" Lang und Einzeilig. Diese Varianten sind auf den kleineren Normmaßen (420mm & 460mm) für Kennzeichen. "CORE ONE L" Fan number plate More of my license number plates:…
Print approx. €2.12–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
The model is designed to hold the license plate in its frame. It should work for standard German license plate frames. I printed it with PETG, but it would be better to print it with a more UV-resistant material.
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Check out my other Halloween models if you like. Description: I created these cute pumpkin bottle opener in Blender. (This is not an AI model ! ) There are bottle openers for 6 different coins. Each available in 2 versions (single color…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Drawing of Ferdinand made by user ALOS . Made using HueForge. Print Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Swap Instructions: Black until layer #10 at 0.92mm Dark Gray until layer #19…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
Replacement of failed weak part connecting vertical vibration excenter with platform of DUVLAN Bellis 4D or other clones.
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for PETGSource material: PET
I think: 10% infill, 4-5 perimeters and 2mm top and bottom solid layer thickness can be enough, but you can try lower values for cheaper print, but result may brake in your situation (STL model is upsidedown)
Print approx. €8.16–€9.98 excl. taxPreliminary estimate for one variant
Drawing of Ferdinand from Ascendance of a Bookworm. Image was drawn by the novel illustrator, You Shiina. Made using HueForge Print Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Swap…
Print approx. €8.04–€9.83 excl. taxPreliminary estimate for one variant