262 models
Simple jig for PTFE tube cutting (4mm OD), having: 60° (30), 90° (45) and 120° (60) degree chamfer tool (works like pencil sharpener) Length of 13, 15, 19, 35.3, 38.8, 42.3, 43.4, 44.2, 50 and 66mm cutting tool Needed tools: Sharp blade…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
I am using this tool for leather working. When I need to make leather thinner or chamfer the edges and it is very use full as well for cutting instead of the crescent knife. It hase big advantage - it is using Martor utility trapezoid…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
A cleaner box to hold your bits! NB! - still testing it out, please give some feedback if you encounter som problems.
Print approx. €5.36–€6.55 excl. taxPreliminary estimate for one variant
XYZ Calibration Cube 30x30x30 Fillet and Chamfer
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
I designed this Gridfinity bin to organize my small woodworking shop. This 1x4 Gridfinity bin holds the Hongdui Chamfer plane and the included tool used to change the cutting blade. The bin has no stacking lip but holes for magnets on the…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
This simple tool is an easy way to calculate the length of any fillet or chamfer up to 50mm on each side. Each small line is 1mm, and the long lines represent 5mm. It is perfect for anyone making a CAD model off of an already existing…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Nice tool to have by you for example when you use fusion. It is sometimes nice to feel the chamfer or fillet between the fingers and you can easy see it maybe should be bigger or smaller. starts at 0 and goes 1 / 1,5 / 2 / 2,5 / 3 and so…
Print approx. €2.80–€3.42 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to try Rangers of Shadow Deep one weekend so I needed d20 dice. I added a small chamfer to "Deliberately unfair (and fair) d20 dice" by Amatulic ( https://www.thingiverse.com/thing:4853423 ), so it rolls a bit better. Chamfering…
Compared to original, it has adjusted scale to 150 mm wide base, letters are set in 0,25 mm deep (first layer) and it has added chamfer 1 mm on the all edges.
May 4th 2022 - Added v2 with a larger area to slide tube out and a hole on the end PTFE tube cutting and chamfer jig for Prusa MK3S+ with E3D Revo Six hotend. MK3S+ - 31mm and 60 degree chamfer MK3S+ - 33mm and 60 degree chamfer E3D did…
..:: РУССКИЙ ::.. Приспособление для снятия фаски в ГВЛ (Гипсокартон) для углубления подрозетников. Для использования необходимо прикрутить два трапецевидных лезвия с отверстиями:…
Hand-held ouside chamfer cutter for plastic pipes up to 63mm
Included are two chamfered versions and step file for custom adjustments if wanted. Print settings for 92A Tpu: Layer height: 0.16 First layer height: 0.25 (important, this makes the bottom joints stronger) Infill: Soft: 5% Higher it is,…
This model is compatible with the lego system.
Print instructions BOM: printed parts: 1x body body-7.stl 1x guide guide-7.stl 1x bolt fixture bolt_fixture-7.stl 1x logo logo-7.stl other parts 1x 9mm stanely blade 1x bolt M3x10mm DIN 912 1x bolt M3x6mm (or 8mm) DIN 912 1x M3nS nut DIN…
If you have a Prusa Mini then you probably will experience the short PTFE tube that goes into the heatbreak shrinking and need to replace it with the spare that comes with your Mini. And then that will shrink and you will need to cut your…
Being lazy again I designed myself a wood chamfering tool. There is a bunch of these on the market, but none of them use utility knife blades and they are usually unnecessarily expensive. So this is the cheap, fast, and easy alternative…
Another Remix, just because one of the standard sizes in germany for sandpaper (230mm x 96mm) lets me cut 2 sandpaperstrips out of it, but lets me with one strip of 230mm x ~16mm left. And so i decided to make a shortcut version of this…
These towel hooks are an amazing addition to your kitchen or workshop. You can hang your towels with a single hand and easily remove them. Printing: Print them in the orientation of the .STL without supports! Make sure you have good…
This is a simple cable clamp for mounting cables to surfaces. The screw hole has a diameter of 5mm, and the cable hole has a diameter of 10mm. This design is resizable, so only one file has been supplied (Though, I can create more sizes…
Motivation I had issues getting a nice print of the original bottom white part due to the fillet at the bottom. This might have happened because I printed a 50% scaled version. Solution I recreated the white bottom part with a chamfer…
UPDATE: These have been updated with bigger font. After a while of going to print, test, adjust and print again I got sick of that method and finally decided to print a fillet gauge to be able to get the fillet radius. In the past I used…
A name plate, chamfered. Customize it to show your name or text (Install OpenSCAD on your own computer). You can customize using OpenSCAD: The shown text. The font. Nice is e.g.: "Orbitron", "Bangers" or "Luckiest Guy" The distances,…
End cap for 2020 Extrusion - Remixed with added chamfer
Remix of a pirate sword handle for a pool noodle sword that does not need supports and now has tighter clearance for the glue join along with an updated interface design. Printed out of PLA at .2mm layer height. No supports needed, CA…
Step 1: Download Step 2: Use your preferred slicer Step 2,5: Buy printer if you don't have one or ask a friend Step 3: Print it Step 4: Get it of the plate Step 5: Play !!
Clean and nice looking cover for the original transport handles from the original Prusa Enclosure. The cover makes the original handles more stable and you can also create a nice two color look if you print it in a different color than…
A very similar concept to my radius jig ( https://www.thingiverse.com/thing:2438336/files ), only this is a chamfer instead. The length written on them is a measure from the corner of the board to the edge of the template. See the diagram…
Here some more radius for the modular Router Corner Jig (https://www.printables.com/model/145817-router-corner-jig-modular). also I have created chamfer for the jig.
I tried to print the original model multiple times but it either failed due to curling and getting knocked off the bed, or ended up looking terrible because of the curling, which is not uncommon for models with a fillet rather than a…
Remix Round Air Vent Cover for 50mm hole with 45° chamfered edge
Remixed version of a very well designed clip.with a bit of bungee cord, it fits 25mm pepper spray or flashlight better. It can be easily put on a belt or pouch for fast access.
UPDATE: Made a version 2 Small articulated cat (with chamfers) for cat fans.
These clips are great and I was looking for something like this. I just added a slight chamfer to the sides of the clips so the edges are not as sharp but more rounded but changed nothing else. The new step file is included as well for…
Chamferless 1/2in drive sockets designed to fit damper and air spring top caps on mountain bike suspension forks. This set includes common sizes for Fox, Marzocchi, and Rockshox forks. For reference, the 26mm socket printed with Prusament…
I liked the short tabs as it could stand up properly, but found it almost impossible to open. This very simple change cuts a chamfer in to the end bin, which gives you an easy notch to get a grip on the start bin.
When I came to needing to make a new hot end PTFE tube, I tried all the chamfering jigs I could find. But I couldn't get the hang of holding a blade in a jig and then turning it, or the tube, to get the chamfer. The only thing that worked…
3D-printed tool for milling a predefined chamfer. Made for a 3.2mm router bit (dremel: 2615065032) but other 3.2mm tools will work as well. chamfer sizes: 1mm, 1.5mm, 2mm, 2.5mm, 3mm No supports required. Place on the large surface so…
This is a credit-card sized ruler, chamfer gauge and hex bolt gauge. There's also a basic protractor with 90 and 45 degree marks. Once in a while you are asked to make something, and wish you had a tool to get all the measurements. Here…
Tool for make corner chamfer router inside table. If you need any other size, just send request I will make it. Changelog: 05/15/2022 - Added 17.5mm version (requested) 07/22/2023 - Added 70mm and 80mm version (requested) Print…
I enjoyed the Flexetki skill-toy in it's original variation, but the hard edges hurt my hands during use. The edges on this remix are chamfered (in a fairly rudimentary way, sorry) to improve comfort. To reduce weight, I provided 3…
This is a set of different sizes of chamfer cutters. The Blade Holder is the same for every size. In addition (for one piece) youll need: Cutter Blade 18 mm (2 Segments) 3x melt in nuts M3 3x M3x8 Hex Screw Ive made some Holders for the…
This is a remix of PFTE Chamfer cutter for Prusa Mini / Mini+ Changelog: hole diameter changed to 4,20 mm (for better tolerance instead of 4,50 mm) smaller fillets (for easiest print and eliminate overhang) print time shorter about 30 min…
A simple battery cover with chamfered edges for the Nerf Stryfe. It adds a few millimetres of space to fit larger batteries. UPDATE 06.13.2020: Included a second version with grooves matching the ones on the Stryfe. Added STEP-files Print…
Add chamfer for easier print.
I already had some “Bauhaus” versions of this kind of Euroboxes. So I decided to upgrade them to be really closed and have a colorful look besides the sad gray. The only difference I added to the original is some chamfering of the inside…
🔥 The Wait is Over: Final Model Version V4 is LIVE! 🚀 Introducing the Infinity Cube V3.1! Building on the success of previous versions, the Infinity Cube V3.1 brings even more refinement, enhancing your experience with key updates that…
The Core One L SKADIS mod is very well made but the panel lacked the chamfers from the original Core One SKADIS mod. This remix add chamfers to the panel itself and its holes, making it a easier to mount your favorite SKADIS compatible…
Added a chamfer that was missing because it bothered me, that's it
36,8 mm and 60 degree PTFE tube cutting and chamfer jig. E3D did not specify the full length in their Revo Six upgrade guide, but I did a calculation with the infos in the remix…
Chamfer & Radius Jigs in 5mm Increments. Ideal to have in the workshop You can either print the required Radius/Chamfer as required, or the full set including storage box. I did draw these from scratch, but are loosely inspired by other…
# 15° PVC-U Pipe Chamfer Tool (Multi-Diameter 110, 90, 75, 63 mm) Use hot water to soften the plastic! A compact, multi-diameter manual pipe beveling tool (chamfering "cup") specifically designed for preparing metric **PVC-U** pipes…
This is modification of the Prusa Protective Face Shield - RC3.2 - stack versions . It has added layer height modifiers to decrease the layer height to 0.15 for the bottom chamfers on each part. It only affects first three layers of each…
Collection of 600 Gridfinity bins that have one side chamfered to allow side access to the bins. Options Widths = [1, 2, 3, 4, 5] Depths = [1, 2, 3, 4, 5, 6] Heights = [2, 3, 4, 5, 6, 7, 8, 9,10, 11, 12, 16] Chamfer = [half height, full…
The chamfer tool is printed with PETG and do not need supports. To assemble the chamfer tool, use cylinder screws M3x15 (2x) and hexagon nuts M3 (2x). Adjust the tool on your chisel to get the required size of the chamfer.
Just a slight variation to the original model, to add a chamfer on the leaf edge.
Same shroud, just with a chamfer
Shower hook for putting on 8 mm glass door. Other designs have sharp edges which are rounded here so that it feels nice and does not cut into things. Clearance is 8.2 mm - use the scaling feature of the slicer to scale it e.g. to 7 mm or…
This tool is recommended for use only on soft materials! How to Use: Mount the solid front part of the tool at the end of a sharp outer edge. The 90 degree inner angle should fit against the sharp edge of the material. Press razor blade…
This is a quick OpenScad model for more consistent deflashing/chamfering of other printed parts. This is designed to use an m2 heat set insert that fits a 3mm wide x 5mm deep hole. The OpenSCAD model could be easily modified for different…
This is the modified version of the MMU3 selector finda with chamfered filament intake that makes it easy for the filament to slide in. Sometimes, espesially when the filament tip is very flat it hits to the side of the hole on the…
This is a remix of https://www.printables.com/model/122969-nut-knob-parametric but with a pre-configured list of bolt sizes from M1.6 through M12 and SAE #8-80 - 1"-8, better surface intersections, chamfers, and a configurable…
You can find here the official files provided by Bondtech useful to print PFTE tube cutter PFTE tube chamfer shaping supporting MINI heatbreak. Official supporting page here Video here
This is a separate logo model for the Ender 3 NG v1.2 electronics panel! Scale the Z axis in your slicer to add a custom depth. The print in the photo is about 50% height. Instead of bothering with multi-color prints, print the…
I found the original version very good and useful, however I usually squash the first layer so the part came out rather sharp on the edges, this remixed version have a chamfer for softer grip. Also, I didn't want to glue the socket…
I love the Kobayashi Fidget Cube as a clever, 3D-printable fidget. The most amazing thing about it is that no assembly is required. Through the magic of 3D printing, all the joints are printed "in place". I've printed many of these…
This model comes with 2 rails and 2 brackets. The rails snap onto the bottom of the plane and the brackets bolt onto the rails to help with aligning the rails. There are hash marks on the brackets so you can always go back to the same…
Filleted cylinder with chamfers for easy printing wihtout supports. Print instructions Category: Other Summary Filleted cylinder with chamfers for easy printing wihtout supports.
Tool for 45* external chamfers on 1 inch or up to 33mm (outside) PVC pipes. I was looking for such tool in local markets but these were very low quality leaving a lot of burs. This one is very simple, easy to print without supports and…
Veritas Low-Angle Block Plane Chamfer Guide for 3, 4 and 5mm chamfer -print with 3 walls -20% infill -support on buildplate only
Improved chamfers for the bolts in the style of Mr. Mestro on YouTube (for flawless threads).
Modified Justin Lauck's design, adding chamfer and fillets.
Chamfered the top and bottom faces of the rocker, for easier printability (no elephant's foot on the bottom) and aesthetics, and added a line down the middle for centering it - inspired by one of the other remixes. I also recreated the…
Just a simple holder for the Router Corner Radius and Chamfer jig. This will house all of the ones from the original creator and from the remix (10 radius, 9 chamfer, and the modular base). Printed with Hatchbox Silver PLA, 10% infill.…
PRUSA MINI+ PTFE TUBE CUTTING TOOL WITH CHAMFER The knowledge base instructions for replacing the hot-end PTFE tube in the Prusa Mini+ calls for a tube with a specific dimension and chamfer. This tool cuts and chamfers commonly available…
With this parallel guide for the Makita RT0700CX2J Router you can mill a 30° chamfer along a workpiece contour. Ball bearings ensure that the original edge will not be damaged. The minimum workpiece thickness is 27mm. If you want to work…
I really liked this design but it didn't fit the hair ties I already had, so I shortened the hair tie paths to fit them better. The hair tie paths are also cleaned up to remove an overhang in the middle. I added a chamfer to the top and…
Chamfer drill bit box Boite pour fraise à chanfreiner
This is a slightly altered Ameralabs town test file. I added chamfered edges to the bottom part for easier removal of the print from the build plate. For a detailed explanation on how to interpret the printed test piece, check the…
I needed a small (portable) and cheap chamfer plane for a wood working project so I designed this to work with disposable, readily available utility knife razor blades. After playing around with it for a bit I further modified the design…
I have a deburring and chamfer tool from RIDGID SCANDINAVIA A/S (catalog number 34965R). I made a PETG holder that allows me to mount it and use it with a common drill. It is mounted on a M8 screw.
📥 Downloaded it? Awesome! If you also hit 💙 and drop a quick 💬⭐, that would be perfect 😎. Got any 🔧 suggestions for improvements? Don’t hesitate to share!
I created this jig to attach to Bridge City tools mini block plane. you can print one attach on which ever side you need or print a pair to use on either side.
4 prepared models, one for each size (2, 3, 4, and 5mm). Attachment is mounted on threaded end, like most of dremel's accesories. Works with 3mm metal Bur, that i got with big assecories kit from Aliexpress
I created a chamfered version of the hook for the HCW. I had issues printing the hook with a radius corner. This hook prints with no issues.
A 20x20x20mm test cube with chamfered edges for printer calibration. Tested on both FDM and SLA printer.
This is a helmet in roman style for the popular dummy 13 model. It fits the standard head, and is an over head armor (much like a real one). This is a chamfered version that is a little more like the classic head and “boxy” style. The…
Save material by optimizing the mold dimensions and shape
Go to https://www.printables.com/model/1043287-skull-key-switch-fidget-toy for all parts.
I always like adding lanyards to knives so I added a lanyard hole to the handle, plus I added some chamfers to the pins as well.
I needed a way to finetune some 45 degree chamfers and sand them perfectly straight. Since I don't have a router table, getting perfect chamfers on smaller pieces of wood was rather difficult, so I came up with this. The chamfer has a bit…
I really liked Erikhellman's IKEA Alex Chamfered Organizer Box ( https://www.thingiverse.com/thing:4308872 ) but needed a few more sizes. I therefore made: .5x.5 .5x1 1x3 2x3 I also found them to be far taller than needed for my…
Round Corner Templates (5x45°- 60x45°) to help you mark the corners. Just hook the template over the corner and mark it with a pencil.
Added a slight chamfer on the clips so they aren't as sharp
I really like the original end caps. They make the ends of my 2040 look a lot better. However, I did have to force some things in because of the flat and square starting point. I added a 60 degree chamfer to make inserting them easier.…
Useful when using MFT plugs for the holes. It can be printed without supports. As some push is put when using the tool I would recommend to use 50% infill or more. The tool uses one M6x5x8 thread insert, one 15mmx2.5mm square carbide…
Model narzędzia - strug do rurek pcv
Liked the model but wanted a chamfer on the bottom to combat elephant foot.
Added chamfer to make it more comfortable to put in/remove.
![Flexetki Skill-Toy (Chamfered, 3 sizes) [Remix]](https://media.printables.com/media/prints/656259/images/5172316_79412357-1e81-4c10-812f-da7353f07760_83b65451-8e49-4237-b758-abec8cc90197/img_2225.jpg)
