920 models
THANK YOU Mom for being My MOM! You are Amazing and the best MOM ever! Please Give my Mom a HEART she deserves it! My Mom is always sewing and knitting for others. When my Cousins' wife was sick with cancer and lost her hair. My mom…
Print approx. €13.50–€16.50 excl. taxPreliminary estimate for one variant
We now have a Version 2 Sock Knitting Machine Legare style with Ribber and Yarn Stand. Please check it out. https://www.printables.com/model/355228-circular-sock-knitting-machine-for-my-mom-and-you-…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Transparent 180 degree 0 to 9cm protractor Type: Protractor Size: 150 x 92 x 1.50mm
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
Circular Joint After searching the internet for some time, I could not find a circular joint that was simple and that would work for what I needed. So I decided to make my own using Autodesk inventor. Also, there is a test fit cylinder(In…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
i made a hanger/holder for my dewalt DCS391 circular saw it has 15% infill and 4 perimeters just retract the blade up as high as it goes and place it in the hanger whilst pulling the guard back
Print approx. €12.65–€15.46 excl. taxPreliminary estimate for PETGSource material: PET
This model is my first time playing around with 3D printing. Did I go a little overboard? Yes. But consider that before I had a project to go overboard on, my 3D printer (which was gifted to me) spent at least a year sitting in its box,…
Print approx. €4.87–€5.95 excl. taxPreliminary estimate for PETGSource material: PET
I love the little Milwaukee FMCS cordless circular saw, not only for metal, but also for wood! But unfortunately there is a problem: Milwaukee does not offer a way to use the saw guided on the rail for whatever reason. To finally solve…
Print approx. €9.82–€12.00 excl. taxPreliminary estimate for one variant
These bases are custom made for use in table top wargaming and D&D. There are 6 different bases (25mm, 28mm, 32mm, 40mm, 50mm, 60mm) included in the file. The bases include the size listed on the under side and a spot for a cylindrical…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
Salut, 2 pièces à imprimer pour réaliser une étagère “cercle” Pour les étagère en bois (ou en impression 3D), il faut 5 pièces d'épaisseur 8mm : horizontal dessus 120mm horizontal milieu 72mm horizontal bas 86mm verticale droite 112mm…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
Transparent 180 degree 1 to 5 inch Type: Protractor Size: 150 x 92 x 1.50mm Filament: PLA & PETG Thank you ;-)
Print approx. €0.78–€0.96 excl. taxPreliminary estimate for one variant
I'd assume it works with most, if not all circular saws. I designed this to work with my SKIL 15 Amp 7-1/4 Inch Circular Saw, model 5280-01. You can see from the cad shots; I've reinforced the holder and pins for added strength. Saw…
Print approx. €5.24–€6.40 excl. taxPreliminary estimate for one variant
My wife knits - often with circular needles. They typically do not have their sizes marked on them. She keeps a size gauge handy, but it is much easier to look at a tag. The cables are about 1.6mm diameter. So to keep the tag loose when…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Superplasma Kask Helmet was missing a circular clip that holds the straps down to the helmet. Printed this in Overture PLA with 15% infill. Recommend using a skirt/brim as it was knocked over the first time I tried to print it.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Store 7 ¼” circular saw blades with this storage case. Sharp carbide blades can be stored in your toolbox or tool bag without damage to the blades or bag. Case will hold several blades, cut foam or cardboard to put between blades for…
Print approx. €4.52–€5.52 excl. taxPreliminary estimate for one variant
I created two decorative versions of the soap holder elliptical and circular versions
Print approx. €10.66–€13.03 excl. taxPreliminary estimate for PETGSource material: PET
prints without supports
Print approx. €22.15–€27.07 excl. taxPreliminary estimate for PETGSource material: PET
My wife asked for something more convenient than boxes and bags for her circular knitting needles. So I build this simple holder. One with mounting holes, one without for double sided tape. extrudr PLA NX2 grey layer 0,2 support yes…
Print approx. €6.53–€7.99 excl. taxPreliminary estimate for one variant
Background I am cleaning up my pegboard tool wall and wanted a better way to hold my tape measure. My tape measure measures Ø53 mm in diameter and 13.2 mm in width. Model description This holder is designed for a pegboard with 12 mm hole…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
This is fan duct upgrade for the stock Ender 3 S1/Pro fan or Sprite pro extruder. Changelog Update: Aug 2,2022 Updated the file with support for resin. Print with hightemp resistant filament or print it using resin printer for better air…
I don't have much storage space at my place and always hated how bulky traditional beer trays were, so when I got bored and thirsty at the same time the other day, I designed this compact minimalist version. It holds the bottles by…
This OpenSCAD file describes my version of a circular knitting machine. This is an original design, but some details and ideas were obtained from various sources . User RoundandRound ( https://www.thingiverse.com/RoundandRound ) very…
INFO Circular fastening, cylindrical gripper, variable diameter connector, jubilee clip, hose clamp or adjustable radial constriction device that will grip firmly around a cylinder, a rod or pole - typically used to secure a hose to an…
Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm
I recently got into miniature printing using and msla printer in particular. I have struggled to print consistent flat surfaces on an angle using this technology. I have been fdm printing for 5 years, but msla printing is its own beast. I…
Printed it in vertical position, using tree supports with brim.
A nice nordic style circular vase. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for full customization 📸…
Introducing the Modular Dice Tower 3D Print Kit: a versatile and user-friendly tabletop gaming accessory designed to enhance your gaming experience. Crafted with precision and innovation, this dice tower allows you to roll your dice with…
Spool for organizing cables. Without supports. I printed in PETG but other materials will be OK. (PLA, ABS…) Update: V2 - without two parts to reduce the sharpness of a cable bend V3 - first version with fill the hole in the middle
Tips: Print with the exposed moving ring facing downwards. Use a strong material for long-term or heavy use. For light loads, and indoor use, PLA is sufficient. Avoid filaments with additives as the parts will almost certainly seize For a…
Mount for a Ryobi cordless circular saw designed for the Multiboard 3D printed storage system . The model can be printed in most any material and default settings. I significantly remixed and included the Ryobi circular saw wall mount by…
This will securely hold an M18 7 ¼" circular saw and should work with most other brands as well. Update 2/10/23: A user has reported that the mount is too narrow for his M18 2732-20, it does it my 2631-20 and a few other people are using…
Little wall mount I modeled in Fusion 360 for hanging my Ryobi Circular Saw on the wall in the garage. Might fit other brands and models but designed for a saw sole plate of 130 mm x 250 mm with a roll up lip around the sides that this 75…
This Fanduct must fit as is, replacing default fanduct on Ender 3 S1 (also Plus/Pro versions). I've printed with PETG(240° nozzle/75° bed) UPD : some users told that PLA MAKE COULD BE MELTED during usage, let me know in a comments if you…
Celebrate the heart of Paris with this circular topographic map featuring the Eiffel Tower and surrounding cityscape . The model captures terrain, park areas, and urban layout in a detailed relief format, perfect for collectors,…
Remix of "Planetary Gear Light Switch Cover" by squinn. Changed square cover plate to a circle. Cover plate only here; get the rest of the pieces from the original model . I also added a lip around the back of the plate to sit flush with…
Well done nordic circular vase. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files for full customization 📸…
Modern designed Nordic ring vase. It is recommended to print overhangs with tree supports. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧…
I had some issues while printing this. Also got the input from a friend that a bottle opener attached to it would be nice. So I remixed it for a slightly better printability and added a standard bottle opener to the design. You have to…
Celebrate the energy and architecture of New York City with this circular topographic map featuring its iconic skyline, waterfront, and street layout . This model captures Manhattan’s distinctive shape, major skyscrapers, and surrounding…
Wanted an easy way to mount my Dewalt 6.5" circular saw in my garage. I designed a two piece mount that the tool slides in and out of easily. Screw the two pieces into the wall with a 10" gap between them. Slide the top of the plate of…
Supersimple print. I used PETG, 5 perimeters, 0,2 layers.
Circular Part Cooling Shroud for Hemera. I wasn't happy with the cooling shrouds that were out there and was needing proper cooling on all sides of the a part that I am designing so I needed something that could handle that. Note I used…
There are already lots of versions of this style of tool holder floating around, but I got tired of; wasting filament printing a big empty box not having a thick enough base to taper the mount for different angles hard to access recessed…
This is a twisted air diffuser for a 120mm PC case fan. The air vent exits at a 45 degree angle. No support needed. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link:…
Standard pegboard (25.4mm) battery post style mounts for additional Ryobi Power Tools beyond what @theamzngq provided here , which is remixed from @AimeBuilder_329593's Universal Peg Board Peg System . Pegs are the version from…
This is a 5015 circular fan duct upgrade to Creality's ender 3 S1/Pro or Creality's Sprite extruders. Here is it in action: ChangeLog -Fixed mounting Issue -Better Airflow -Added new mounting points for more rigidity -added overall…
UPDATED: I realized that I really made the walls to thin, and the supports to small. So Ver2 corrects those issues, and I tried to make it easier to print at a standard 0.4 dia nozzle @ standard 0.2-layer height. I've also included a STEP…
This buckle can be used to craft a belt or a (paracord) bracelet for example. Printing at 0.1 (or lower) works best for me. When printing with a higher layer-height, chances are, that it will become difficult to open and close the buckle.…
Yet another part cooling fan duct for the Anycubic i3 Mega S (should work fine for the non-S Mega, as I believe they have the same fan and X-carriage cover. I recently upgraded the hotend to an E3Dv6 and due to the geometry when its…
I created this model to mount my TP-Link Deco M5 mesh wifi. I wasn't able to find any existing circular mounts that would fit the M5. This mount is fully customizable and parameterized via OpenSCAD. It can be printed with either a built…
I couldn't find one I liked so I decided to design my own. I print these in PLA+, 0.28 layer height, 6 walls and 45% infill with a 0.6mm nozzle. Supports everywhere and they break off pretty easy and clean with the right settings. Maybe a…
This is an adapter made to suck dust from my Makita DHS680 circular saw with a shop vacuum. opening is 38mm in diameter. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: low Infill: 25%…
0.2" thickness. Printed with wood PLA. No support or adhesion needed. 7" version fit on my Ender 3 V2 bed at 100% when rotated as shown in photo.
This is a very simple model I created to help me sand tracks and inside features of Circular Sock Knitting Machine collar Just glue 600 or finer sandpaper to the underside (and a sidewall if you want to sand inside wall surface) I'd…
A set of variously sized cassettes for organising circular knitting needles, along with boxes for storing them. Small - up to 4.5mm Medium - up to 7.5mm Large - up to 10mm Extra Large - up to 13mm Wind the needle cord around into a loop…
Aquesta nova versió V2 es una variació a la V1 https://www.printables.com/model/1486511-mini-serra-de-disc . He suprimit el moviment longitudinal del Cos que permetia tallar peces mes grans però no era gaire estable i, el poc pes de tot…
Update 2019-06: v2 with improved clip flaps. Looking for a way to connect my non-Bosch workshop vacuum to the GCM8 SJL miter saw I came across Ruperts design, which looked appealing but was angled, which I did not need and which is…
I've seen many nice printable circular saw wall mounts, however, I've not seen one that allows the saw to sit naturally out from the wall. I designed this print to contour the saws deck and take advantage of the 12mm holes in the back.…
I printed this in black PETG at 25% adaptive cubic infill but with minimum 4 perimeters for more strength, which is holding well. Design: https://www.tinkercad.com/things/lp4SCkfOLHW
Modified version of the 'Semi-Circular Anet A8 Fan Duct' https://www.thingiverse.com/thing:1954001 I have installed a new feeding tube which offset my nozzle to a lower point relative the original one and I have also installed an auto…
Slice with high resolution, print with the top on printing plate super fast print, enjoy :-)
This model is compatible with the lego system.
I wanted to make a food dish for my crabs that had different sections so I can see what they like. They really love popcorn so I made the center section as a kind of treat section and then the other main sections for hardier foods. I…
Milwaukee 49-90-3001 Dust Adapter. Outlet is 40mm O.D.
A collection of 4, Inch measurement based circular mounts for MMS/Picatinny! 1 Inch, 1.5 Inch, 1.75 Inch, and 2 Inch! If you need millimeter based measured ones, be on the lookout for another post with millimeter measured circle mounts!…
Bring ancient history to life with this circular topographic map of Rome featuring the Colosseum. The model showcases the world-famous amphitheater, nearby Roman Forum area, and detailed urban contours in artistic relief — ideal for…
It's made to use a baby aspirator device (like polish Katarek, see https://katarek.pl/) with Philips 8000 series vacuum cleaner. In a broader view, it's just a converter from Philips to any device that needs a 34mm (inner) and 36mm…
I went on a kick designing small parts trays a while back. This one is the smallest and cutest of the bunch. I use these mainly to prepare small rivets, buttons, etc. when working on a leather project, so I can keep the random boxes on my…
Screw holes are at 5mm intervals. The closest is 60mm from the bit center, the furthest is 150mm. It's designed to fit the Milwaukee compact router's 4" base plate - but quite possibly fits others too. For speed I printed in PETG 0.8…
An vacuum adaptor to fit your makita 5007 series circular saw, collects most of the sawdust. I made it to fit my Ridgid shopvac hose, which has an outer diameter of about 32mm. The printed one in the picture is slightly different(bigger…
January 24, 2025: Original Code was done in OpenSCAD2023. Apparently this code does not respond gracefully with older versions of OpenSCAD like version 2021. I have modified the code and uploaded another .scad file for this project that…
This is an adapter for Mercedes A class air vent. I didn't found anything that fit for my car and I designed this one to match with https://www.printables.com/it/model/322690-car-phone-holder
Measure the diameter or radius of a corner/fillet using this circular tool. Many of these types of tools use the easier to model semicircle, which may not be as useful as most corners, which are 90 degrees, have a fillet of a quarter of a…
I needed to connect some elastic rope, so I remixed the great design from Breaks'n'Makes. Original: https://www.printables.com/model/124601-buckle Thank you very much for publishing the step file - makes things much easier… New step file…
Capture the beauty of the Pacific Northwest with this circular topographic map of Seattle featuring the iconic Space Needle and city skyline . The model shows the urban layout, prominent buildings, and shoreline contours in detailed…
Makita XSS02 18v Circular Saw Mount for IKEA SKÅDIS System Influenced by David Lane's Ryobi saw holder/mount . This is a Makita XSS02 18v Circular Saw Mount that attaches to the SKÅDIS pegboard with printed M2.5 T-Nuts from 6d6178 . (See…
Introducing the Circular Bead Maze Labyrinth. This engaging tabletop game is designed to test your dexterity and strategic thinking as you guide four metal beads to their respective destinations. Engineered with precision using Fusion360,…
Capture the architectural beauty of the City of Chicago with this circular topographic map featuring its skyline, lakefront, and urban layout . This model showcases the city’s high-rises, shoreline along Lake Michigan, and street grid in…
A circular offset block lamp shade using the Bambu Lamp Kit 001 Base and Puck Led lamp. This shade does not require a base plate to attach to the Bambu Lab Lamp Kit001 base. No supports required. The puck led used here: (The example used…
For saw blade sizes with diameter up to 190mm, thickness up to 4.2mm and 30mm bore.
Soporte para litofanía semicircular con luz posterior tipo led. Fácil de imprimir, no requiere soportes. Liviano y estable. Print instructions Luego de imprimir se coloca una lámpara tipo led. La litofania de tamaño 10 x 10 se coloca con…
Description A Circular Fan Duct adapted for the Anycubic 4Max Pro. I tested many fan ducts here in Thingiverse, no one reached a better quality then this one!. Get your own picture of the results. How to Print Just print it with your…
A stand for the RCS-18X-0 but it might fit other models and brands (the base is 150x315mm). The pegbord mounting is for CC12mm. There is space for the fence in the back of the holder to maybe not lose it to fast. There is one split model…
10.04.2023 EDIT - Changed parameters to include wall thickness and the inside diameter measurement instead of outside. Included the blank insert STL so people can remix. I utilize one of the best inserts I've tested for the honeycomb…
Escape the Maze! Just throw a metal ball and challenge your brain. Ah, I need that ball… Well. I used one from some eye cream tube I found (hope she won't notice) - see photos. They are exactly 4.5mm in diameter. Perhaps, you may have…
Print the main parts sideways and print the bolts with threads facing upwards. The models are labeled with the diameter of the circular shape of the main part. The base is 5cm wide. There are two bolt sizes. The same design for flat…
Remix of Jerrari's excellent design, to hold the handle of the circular saw tool. See my other remixes for variants to hold the worklight and jigsaw.
Requires an M5 x 2 cm bolt to attach it to the saw. I printed in PLA with a 0.4 mm nozzle and 0.2 mm layer height, with the adapter on its back. I found this orientation to minimize supports and keep the layer lines oriented in a…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Reupload from https://www.thingiverse.com/thing:4822701 DaveMakesStuff is a FANTASTIC creator! --- These print-in-place twisty tubes can be used as puzzles or just fun fidget toys. See here for video: https://youtu.be/_59nRTc5oJ8 See here…
Designed a Makita DHS680Z dust bag since I currently do not have a shop vac or for instances when needing to take it outside. I designed it so that there is a hole in the filleting cap. This should allow displaced air to escape. It is…
I printed this in black PETG at 40% adaptive cubic infill. Depending on the screws you're using to mount, you may want to adjust the screw holes. Design: https://www.tinkercad.com/things/hq92p9dvA5Q
Simple tool designed to make cutting with circular saw easier. Bigger model can be printed and used on its own. The way it's meant to be used is to mark a line where cut is to be made, align chamfered edge to the line and clamp the tool…
A simple two piece through-door vent for your bathroom or any other room that needs a bit of extra ventilation even when the door is closed. When assembled properly the fins are oriented in such a way that one cannot see through the…
OpenSCAD Parametric Circular Sock Knitting Machine Cylinder All dimensions in mm Latest changes: 05/01/2025 - Asphalt's corrections to minor print artefacts. Thanks! 22/12/2024 - Make spring slot just a tiny bit taller than the spring.…
Easily use a Milwaukee circular saw as a tracksaw. Uses 2 hold-down clamps to secure the saw. Glides easily over the (cheap) WEN track that I have. Category: Machine Tools
This is a model that a student created by measuring and reverse engineering a plastic puzzle toy. Everyone loves to take it apart. Enjoy. Instructions Print one of each color piece Assemble Category: Other
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments This is a great circular sawholder - attaches firmly to Multiboard and fits my Dewalt 570 perfectly. May fit others - let me know if…
Featherboard for the circular saw for mounting on the fence and the sliding table on a Felder/Hammer K3/B3
