Search results: clearance

Sort order

571 models

P
PrintablesAndreas W

KUNA laptop stand with 15mm clearance

I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with…

Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant

Downloads
3,038
Likes
347
Rating
4.84
P
PrintablesMiguel M.

DeWalt Miter Saw Zero Clearance Insert

This is a zero clearance insert for Dewalt miter saws. I modeled it from the insert on my own saw wich is a DW716 (12inch, dual bevel, NON sliding) from what I can tell from the replacement inserts on amazon, this will fit models:…

Print approx. €3.71–€4.54 excl. taxPreliminary estimate for one variant

Downloads
1,515
Likes
268
Rating
4.91
P

Clearance and Tolerance 3D Printer Gauge : 0.15-0.50mm

Here's my design of a Clearance and Tolerance 3D Printer Gauge . Drawn in Fusion 360 Print instructions ¤ Use .3mf or .gcode for presliced settings. ¤ Print in Prusament PETG Galaxy Black and Prusament PETG Signal White ¤ Use Prusament…

Print approx. €4.78–€5.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,011
Likes
50
Rating
4.5
P
Printablesjlennox

Ridgid R4512 Table saw zero clearance throat plate (R4520?)

This is a zero clearance throat plate for Ridgid R4512 table saws. These may or may not work on R4520 saws? I believe they are the same but I do not own one to verify. Because the print is too large for most printers, it must be printed…

Print approx. €9.84–€12.02 excl. taxPreliminary estimate for one variant

Downloads
360
Likes
52
Rating
0
P
PrintablesBurfot

Bosch GTS635-216 Zero Clearance Insert

Zero clearance insert for the Bosch GTS635-216. I had to print in two pieces and glue them, but I've included an "un-split" stl also. I added sections of 100% infill around the corners, the joint, and where the blade will cut through. I…

Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
224
Likes
24
Rating
0
P
PrintablesJonHart

Embedded Magnets - Core One Purge Bin - (Nozzle Wiper Clearance Remix) - 10x2MM

I wanted a cleaner option that didn't require glue or epoxy. I used 10x2mm round N52 magnets. 10x2mm N52 magnets Amazon https://www.amazon.com/dp/B0F4CDKM9J?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Print approx. €2.35–€2.88 excl. taxPreliminary estimate for one variant

Downloads
35
Likes
1
Rating
0
P
PrintablesMr. N

Clearance and Fit "Goldilocks" Gauge Set

When designing a model with moving components I want to know the exact clearance required for my target behaviour. Sometimes I want the parts to move freely and can accept some jitter or precession, sometimes I want the parts to only move…

Print approx. €5.63–€6.88 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
2
Rating
0
P
Printables3DMakerNoob

Clearance Tolerance Test

Inpired by Maker's Muse's tollerance tests, this is a smaller version to test your printer clearance capabilities

Downloads
76,729
Likes
7,222
Rating
4.95
P
Printableslostintech

Clearance Gauge

What, I finally linked to the video? Haha, I said I would. Eventually :)

Downloads
7,694
Likes
837
Rating
4.82
P
PrintablesWilko

C-Clamp / G-Clamp 01 - 04 (Smart infill, better clearance)

Introduction I've created this C-Clamp (or G-Clamp if you like to call it this way) because of three reasons. For my upcoming enclosure build I'll need some clamps to hold parts together. To train my Fusion 360 skills I've never printed…

Downloads
6,335
Likes
635
Rating
4.67
P
Printablescolorful-corvid

Articulated Lizard with Rotated Ankles and Improved Clearances

A Remix of McGybeer's classic articulated lizard, with wider clearances so it can be printed smaller (my Ender 3 can consistently handle it at 0.55 scale with no issues). The ankles are also improved because the original looked a little…

Downloads
4,568
Likes
300
Rating
4.77
P
PrintablesLCSteve

DeWalt DWE7485 Table Saw Zero Clearance Insert

I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…

Downloads
2,978
Likes
378
Rating
5

Collapsing Clearance Test Print

This print is used to gauge your success when printings a print-in-place collapsing sword or lightsaber. Each ring has a different amount of clearance. How many rings are free after printing will tell you what clearance your printer is…

Downloads
2,569
Likes
119
Rating
4.91
P
PrintablesEd

Core One Purge Bin - Clearance for Core One Nozzle Wiper - Remix 20x5x2MM Magnets

I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.

Downloads
2,378
Likes
475
Rating
4.96
P
PrintablesKeep Making

Crystal Clearance Tower & Tolerance Card

A quick and straightforward print to test your 3D printing clearance / tolerances.

Downloads
2,071
Likes
185
Rating
4.95
P
Printablesjpdesign

Tolerance/Clearance Test

There is a new version available here . A simple tester for your printer tolerances. Start with the normal file, if you cannot break out any of them, than you can print the other file, which has bigger/looser tolerances. When printed, try…

Downloads
1,918
Likes
86
Rating
4.58
P
PrintablesEmbrace Making

Laser Cutter Slot and Tab Clearance Test (3mm materials)

This clearance test shown in the video above was originally intended to be a kerf test (as can be seen on the labelling) for laser cutters and engravers. The tab dimensions are 15mm x 3mm. The slot dimensions incrementally change from…

Downloads
1,380
Likes
97
Rating
4.5
P
PrintablesFestool

Festool Kapex Zero Clearance Insert

Festool Zero Clearance Insert – Precision cuts with maximum safety! Print your own Festool Zero Clearance Insert for cleaner cuts, higher precision and maximum safety. Cleaner cuts: Minimizes tear-out and splintering for flawless edges…

Downloads
1,296
Likes
68
Rating
5
P
PrintablesK2Van

Clearance test - a new challenge who unlocks the 0.06 mm clearance nut?

Many similar clearance tests are available here and elsewhere in internet. I could however not find one that goes tighter than 0.1 mm so modeled one up in Fusion 360. I have been able to tune my printer (CREALITY CR-6 SE with Dragon…

Downloads
1,232
Likes
93
Rating
4.88
P
PrintablesSteven Barker

QIDI Q2 Foot support with extra clearance

Modified version of Allan's QIDI Plus4 foot to fit the Q2. This raises the Q2 1cm off your desk, and provides a wider base for stability. For my printer this increased stability and reduced vibrations. These may require more work, your…

Downloads
1,198
Likes
133
Rating
5
P
PrintablesBBTheStig

Dewalt 7491 Zero Clearance Table Saw Throat Plate - 7491RS - 7492QS

I redesigned this throat plate eliminating the screw holes and lock (lock is not necessary to have). I have fine tuned the bottom feet to be the exact height to level the plate with the table saw top (you can slightly sand these feet if a…

Downloads
1,153
Likes
105
Rating
5
P
PrintablesKevin Scott

Bosch GCM12SD Axial Glide Miter Saw Zero Clearance Insert

I printed mine at 100% infill. Then I used CA glue right before screwing it down. Once I screwed down the insert, I made the cut.

Downloads
1,077
Likes
118
Rating
4
P
Printablesp3numbra

18650 Rugged case with added hinge clearance

Modified this model to Include some clearance around the rear hinges, as I found that the case wouldn't open properly. Both the top and the bottom files have been modified, however, the original clip works fine. Happy printing : )

Downloads
1,037
Likes
358
Rating
4.75
P
PrintablesRapidMonster

Further Improved Wandering Hour Clock (Increased Clearances)

First and foremost: Thanks @ David Kingsman for providing us with such a neat clock model! Myself and everyone else I showed it to really liked this fresh design! Sadly I ran into multiple clearance issues while assembling the parts…

Downloads
1,011
Likes
277
Rating
4.8
P
PrintablesCoolDoctorJ

MiniZ Ford Mustang 1967/68 fastback with more wheel clearance

This is a remix of the MiniZ Ford mustang 1967/68 fastback (sportroof) body . I cut out additional clearance for the front and rear wheels in order to allow better steering and suspension travel specifically on the Fully Printed 1:28 Car…

Downloads
918
Likes
404
Rating
5
P
Printables3D Printy

Pop-up Gift Card Box - Larger Clearance

Alternate latches for the Pop-up Gift Card Box with larger filament holes. The original latch files have 2.2mm holes and are made to be a tight fit with 1.75mm filament. These latches have 2.6mm holes, which will more easily accept 1.75mm…

Downloads
783
Likes
211
Rating
5
P
PrintablesViragored

Articulated Lizard with Rotated Ankles, Improved Clearances and easy to print

The original model has a description of the designer's goals - well achieved! But there is no need to do anything fancy to make this model print - slice it and print it. No supports, no brim (on my Prusa i3S Mk3 with PLA). If you happen…

Downloads
744
Likes
46
Rating
5
P
Printablesjdegs

Clearance Gauge (Improved)

This is a remix of the clearance gauge by Lost In Tech with the addition of an 11mm peg version for 0.6mm printers. I also changed the text from embossed (raised) to debossed (indented), added a small chamfer to help reduce elephants…

Downloads
728
Likes
87
Rating
4.8
P
PrintablesSlaig

C-Clamp / G-Clamp Remixed - Better clearances and durability

Notes Since my poor tolerances of my 3D printer did not allow me to print the thread correctly, I remixed the great 03v2 file from Wilko to fit my needs (thank you for the fusion 360 file !) Fully compatible with the original author…

Downloads
721
Likes
58
Rating
4.67
P
PrintablesMarky

DeWalt DWS 780 Zero Clearance Insert

Zero Clearance insert for DeWalt DWS 780 miter saw. I printed it in PLA+ with 80%+ infill. If you have smaller printer like me (Bambu X1C), insert can be cut in half with Plug connectors (4mm in diameter, 8mm deep). I recommend use 0.20…

Downloads
713
Likes
68
Rating
0
P
PrintablesNeil J Borja

Pastamatic Extra Clearance Wiper Mounts

This set of wiper mounts for the Pastamatic Spool Winder has .25mm extra clearance for easier insertion/removal of the TPU wiper blades. It can also help compensate for any warp or flaws in the holder or wiper prints that prevent the…

Downloads
670
Likes
86
Rating
4.92
P
PrintablesRyan G

Zero Clearance Block/Backplate Festool Kapex KS 120 EB

Prevent blow-out on the back side of your workpieces with this simple solution. It clips right into the “half-circle” recess in the middle of the fence bracket. Once clipped in, unclamp both side fences and pull them inward, until each…

Downloads
669
Likes
77
Rating
5
P
Printablesmce076

Axial SCX10 Skid Plate High Clearance

This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to…

Downloads
586
Likes
55
Rating
0
P
PrintablesMKE Dan

Clearance Test

Clearance Test. Tests diametral clearance capabilities from .30mm to .05mm My Slice settings (in orca) for the Bambulab P1P: Layer height: 0.1 Slice gap closing radus: 0.01 Mat'l Matt blue SUnlu PLA FYI: Even the .05 clearance worked …. a…

Downloads
570
Likes
30
Rating
3.67
P
PrintablesUseFullMake

Clearance Coin

This is a Clearance test that should be fast and should not consume a lot of plastic. This should take less than 10 min with 0.2mm L.H. 50mm/s and less than 2 Grams of plastic. This is measuring clearance from 0.05mm to 0.5mm. I had to…

Downloads
563
Likes
31
Rating
4.8
P
PrintablesBurgessG

Delta Table Saw ZERO Clearance Throat Plate (v3)

Purchased a Delta table saw from my LHS and although the throat plate that comes standard works, it lets a LOT of dust and debris through. So, instead of plunking down big bucks for a replacement I simply made my own. And it worked!…

Downloads
538
Likes
84
Rating
0
P
PrintablesAtelierDZT

Zero Clearance Insert for Dewalt 7492

Just another Zero Clearance that fit for Dewalt 7492 with stock equipement. Print Settings Printer Brand: Creality Printer: CR10S PRO **Rafts:** No Supports: Yes **Resolution:** 0.20 Infill: 20 **Filament:** Amazon BasicFil PLA…

Downloads
528
Likes
45
Rating
0
P
Printablesataboo

Delta 36-725 table saw zero clearance insert

Update: the first version was a bit small and clearance between the two halves was too tight so I've uploaded a v2. May fit on other saws, but based on measuring the stock cover for a Delta 36-725 T2. Around 3-¾" x 15-½". 2 pieces to…

Downloads
525
Likes
59
Rating
5
P
Printablescaribou

Axial SCX24 High Clearance Suspension Links - Basecamp/C10/JLU/Bronco

Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…

Downloads
521
Likes
69
Rating
4
P
PrintablesWyldesyde007

Craftsman tablesaw zero clearance throat plate

A zero clearance throat plate for an old portable craftsman table saw. print the pieces as they are laid out. The plug end for the hook is deliberately tight to get a snug fit after a small amount of sanding. Print instructions Print…

Downloads
509
Likes
78
Rating
5
P
Printablesoufzor

Filled Clearance Tolerance Test (Remix)

I quite like this Tolerance Test by 3DMakerNoob but sometimes I like to add notes directly on the prints when doing some setting tests. The original model shape was too limiting due to all the curves so I simply filled it. Material…

Downloads
499
Likes
23
Rating
5
P
PrintablesThiago Silva

Nano Test Print - dimensions, overhangs, bridges, stringing and clearances

Very tiny test print I designed to test the level of detail I could get from my settings. See attached pictures for all measurement details. This print tests dimensional accuracy, curves and spheres, holes, bridging,…

Downloads
464
Likes
37
Rating
5
P
PrintablesWoodenti

zero clearance adjustable miter runner insert for table saw

Update Additional model for 16.4mm - 17.5mm grooves (fits Bosch GTS X10). (In case your groove is only marginally smaller, i suggest to manually grind it off) Idea Above the final miter runner the cross cut sled will be placed which will…

Downloads
452
Likes
143
Rating
5
P
PrintablesChris

AX24 XC-1 52mm High Clearance Lower Suspension Links

AX24 XC-1 52mm High Clearance Lower Suspension Links A set of stock length High Clearance Lower Suspension Links for the AX24 XC-1. I wanted a set of color suspension links to match the Orange body of the AX24 itself. Printed in Prusa…

Downloads
451
Likes
80
Rating
5
P
PrintablesGuyH

M3 (ISO) Countersunk Screws Clearance holes - Negative modifiers

What I'm uploading is stl's but not ones you would usually choose to print! These are intended as negative modifiers to make it easy to place holes in your parts within a slicer. When I say slicer I'm focusing on Prusaslicer for obvious…

Downloads
451
Likes
37
Rating
5

High Clearance Mod for Thumper RC 4X4 Crawler

This mod only works with the [Cheater B540C transmission] included here. [B] is the gear ratio [540] is the motor mount, [C] stands for Clearance. If you are serious about crawling a Thumper model, this transmission and frame setup…

Downloads
442
Likes
71
Rating
5
P
PrintablesDave G.

Motor Mounts with Clearance for 1.5GT Pulleys on Upgraded CORE One/+/L

After installing the 1.5GT belts and pulleys for the Gen2 upgrade on my CORE One+ printer, one of the new pulleys was rubbing on a curved guard built into the stepper motor mount. It made a hard-to-locate scratching sound while printing…

Downloads
433
Likes
181
Rating
5
P
PrintablesWill.S

Gridfinity Dial Caliper holder for low-clearance drawer

This is a container for 150mm/6in dial calipers that gets them as low as possible without laying them on their side and taking up extra horizontal space. I had to leave out one of the magnet holes to make room, but the other 23 should…

Downloads
424
Likes
49
Rating
5
P
PrintablesEA3D

Clearance test spinner

There are 5 testing wheels with a clerance of 0.5, 0.4, 0.3, 0.2 and 0.15mm.

Downloads
416
Likes
31
Rating
4.75
P
PrintablesCobalt

Metabo KGS 216 M Zero clearance insert

I could not find a zero clearance insert for my 2023 Metabo KGS 216 M as the old versions differ. I have included both the entire model as one piece and a version consisting of 2 parts for printers with a smaller print volume. Print the…

Downloads
413
Likes
55
Rating
4.33
P
PrintablesHanselcj

Zero Clearance Insert, Miter Saw Plate, DW715

I created a zero clearance insert to replace the standard stock insert on my DW715 Dewalt Miter saw. This one has been in use for a few months now and doesn't show any serious signs of wear. It requires a long bed (I have a prusa i3), but…

Downloads
374
Likes
54
Rating
4.6
P
PrintablesDudadz3d

Festool Kapex 120 REB Zero clearance Fence Insert

Keep your Kapex from blowing out the grain on the back side. I've seen similar items, but they were bolted to the saw only worked at 90 degrees. This is easily removable and also allows the saw to move freely while installed. Front face…

Downloads
371
Likes
18
Rating
0
P
PrintablesJamie Clarke

Evolution Mitre Saw R255SMS+ Zero Clearance Insert

Zero Clearance insert for the R225 mitre saw from evolution power tools. It has a dust box on the bottom with an opening at one end. This prevents dust from falling out the underneath of the saw and encourages dust to be flung up from the…

Downloads
366
Likes
28
Rating
5
P
Printableszuberio

Print in Place 45mm Folding Cube - 0.5mm Clearance

My 6yo saw one of these on Thingiverse and wanted me to print it for him. Unfortunately the tolerance on that other model was 0.2mm - too tight for my printer. So I created my own with a 0.5mm tolerance and it works great. Exterior…

Downloads
361
Likes
63
Rating
4.5
P
PrintablesmApe

Metabo KGS 254m Zero Clearance insert

Zero Clearance insert for Metabo KGS 254m You need both part 1 and 2 plus 2x 5x20 mm sylinders to mount. Use original screws to mount

Downloads
361
Likes
28
Rating
4.75
P
Printablesduffwv

Ender 3 V2 Y Tensioner and Stepper Mount Linear Rail Belt Clearance Mod

I installed a linear rail kit with a rail mounted to the top of the y extrusion. This caused the belt to angle up and rub against the stock Y tensioner and the belt hole for the Y stepper mount. There are models that I made to replicate…

Downloads
331
Likes
51
Rating
5
P
PrintablesGirak

Prusa CORE One Snap-in Corner Block/Plug (Door Clearance remix)

The original corner block on the top left interfered with a fully opened door. Attached are files for standard core ones (hinge on the left side) and for those who have switch to right hinged.

Downloads
320
Likes
54
Rating
4.92
P
PrintablesGuyH

M4 (ISO) Countersunk Screws Clearance holes - Negative modifiers

What I'm uploading is stl's but not ones you would usually choose to print! These are intended as negative modifiers to make it easy to place holes in your parts within a slicer. When I say slicer I'm focusing on Prusaslicer for obvious…

Downloads
316
Likes
25
Rating
5
P
PrintablesBrainanator

SCX10 Skid Plate. High Clearance, Flat Bottom

Center skid plate for the Axial SCX10 RC crawler. This gives you a little more ground clearance to prevent getting hung up. This skid plate DOES affect link geometry slightly. There are 2 version, once for the stock links using Axial…

Downloads
312
Likes
18
Rating
0
P
PrintablesChrisCow

Ridgid R4514 Table Saw Zero Clearance Insert

For large enough printer, just use the body_full and the two nob parts. For smaller printer, you will have to print the body as two parts and then connect them using 3 copies of the insert. Use glue if you want to make it permanently. For…

Downloads
310
Likes
56
Rating
5
P
PrintablesJeremy

Garmin Varia / Magene L508 Saddle Mount for Saddle Bag Clearance

Update : After using this in the 40C weather and putting in a few thousand km this summer, I made a few changes, to increase the strength of the main piece. Mine never broke, but I like this update a bit more. 7/10/2023 This model/remix…

Downloads
304
Likes
31
Rating
0
P
PrintableseCrowne

Dan A4 SFX (V4+) CPU & GPU Spacer (+16, 18, 20mm) for coolers up to (64, 66, 68)mm or extra GPU clearance

This will only work on Dan A4 SFX V4 or newer as it requires the threaded holes on the side to be mounted, along with the pins and clips. I needed more clearance for a larger cooler than it fits in this case (Thermalright AXP 100 full…

Downloads
301
Likes
31
Rating
5
P
Printablescs900

13B side seal clearance tool

for those of us who enjoy building our own engines, this tool is meant to help aid in setting the correct clearance between the side seal and the corner seal. Things you'll still need: 1) drill press with locking table 2) drill press…

Downloads
300
Likes
21
Rating
0
P
Printablesmanmac

Core ONE rear axis support - stronger with more clearance

Thanks grosiln for the idea and Stanley for the stronger mod. Printed with PETG and 02.mm layer height and works fine.

Downloads
294
Likes
110
Rating
5
P
PrintablesJohannes

Bosch GTS 10XC sliding rail (less clearance)

Bosch GTS 10XC sliding rail (less clearance)

Downloads
286
Likes
25
Rating
0
P
PrintablesDennis List

Metabo KGS216M Zero clearance insert

Couldnt find a model for the Metabo KGS216M so i made one. Did not fit my printbed so it is split in Part1&2. The full part is also uploaded if it fits your printer bed. Just print, install and cut a groove using the saw.

Downloads
286
Likes
30
Rating
4
P
PrintablesBen

Axial SCX24 Lexus GX470 / Deadbolt 4 Link Conversion + High Clearance Links

High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…

Downloads
283
Likes
25
Rating
0
P
Printables4runnerFreak

Philips 276e8vjsb 4k monitor 75mm VESA adapter. Cable clearance and hardware fit

I ended up re-modeling this adapter to 75mm x 75mm only and moving the VESA mount down to give clearance to the Display Port cable. Made to fit hardware and allow final mount assembling after monitor is reassembled. It is a tight and…

Downloads
273
Likes
13
Rating
5
P
PrintablesGabriel

Low weight Tolerance clearance test 0.00mm - 0.3mm

Low weight Tolerance test 0.00mm - 0.3mm

Downloads
263
Likes
19
Rating
5
P
PrintablesThe Angry Otaku

Bambu Labs Filapoop Bucket (Minimum Clearance)

The shelf I had this on was too short for the full size purge bucket and the printer together, so I edited the bucket so that the space between the back of the printer and the back of the bucket was as small as possible (~50mm), which is…

Downloads
261
Likes
23
Rating
5
P
Printablescaribou

Axial SCX24 High Clearance Suspension Links - Gladiator/Power Wagon

Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the SEMA links on Cults. V1 and V2 have identical footprints/outlines – the only…

Downloads
260
Likes
28
Rating
5
P
PrintablesJimjo

SCX10 III - High Clearance Bumper

High Clearance front bumper compatible with the Axial SCX10 III Basecamp. Please note the bumper is NOT compatible with the JLU body or other bodys that use the “clipless” mounting system. Provides much improved approach angle vs the…

Downloads
260
Likes
24
Rating
0
P
Printablescaribou

Axial SCX24 High Clearance Suspension Links - Deadbolt / Betty

I HAVE NOT TESTED THIS ONE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…

Downloads
259
Likes
36
Rating
0
P
PrintablesKija

Voron StealthBurner + Orbiter v2.0 more 5015 fan clearance (Remix)

I'm not sure why but my orbiter v2 would collide into the 5015 for all models I could find. (Maybe my fan is wider?) This model allows the fan to be recessed 2mm deeper into the body. The orbiter then doesn't touch the fan. Thank you to…

Downloads
256
Likes
27
Rating
0
P
Printablesjaeseopark

Metabo C12RSH2S zero clearance insert

This is a zero clearance insert for Metabo C12RSH2S. Also marketed under Hikoki and Hitachi. The plate should also fit the respective predecessor C12RSH. The insert is 464mm along its length so do your math and download the file that fits…

Downloads
254
Likes
33
Rating
5
P
Printablesthelayerfactory

Clearance Check

A quick print to check how well you printer handles print in place clearances. Designed it so i have a guideline for future projects. If it rotates right out the printer without use of excessive force, that would be a perfect place to…

Downloads
251
Likes
23
Rating
5
P
PrintablesLevi Sitts

Clearance Gap Test

The numbers on the wheels represent the air gap in hundredths of a mm, so 25 = 0.25mm Use the included 3MF, because I painted the seams to keep them away from the gaps to be tested. I created the model in SolidWorks and exported at 2…

Downloads
247
Likes
21
Rating
5
P
PrintablesLCSteve

Kobalt Sliding Compound Miter Saw Zero Clearance Throat

This is for the Kobalt (Lowes hardware) 12 inch dual bevel sliding compound miter saw item# 0358936 / model# SM3055LW. I bought my saw probably 8 years ago now but I'm pretty sure they still sell a derivative of this saw at the stores. A…

Downloads
243
Likes
34
Rating
1
P
PrintablesLagada355

Mini clearance test

The files are organized according to the test range of the gauge in mm.

Downloads
243
Likes
17
Rating
5

SpaceMouse V2 Extra clearance ball joint

Makes the ball joint thinner and bigger for extra movement and less wiggle. Print slowly to prevent snapping off.

Downloads
240
Likes
19
Rating
4.6
P
Printablesreadysetawesome

Remixed "Delta-P fan duct for MK3S extruder" w/clearance for MK3S parts

I printed this in ASA at 100.5% scaling to allow for some shrinkage. using variable layer height I made changes to fix the misalignment of the part cooling fan and the duct/bracket that wraps around the heartbreak, above the hotend. In…

Downloads
237
Likes
32
Rating
1
P
PrintablesNight_Flyer_000

Hammer C3 zero clearance insert

Zero clearance insert for the Hammer C3 table saw. It probably also fits the Hammer K3 and Hammer B3. To limit the size of printer needed it is a 2 part model. The attached model are each time the front and back parts for both a 250 mm…

Downloads
236
Likes
18
Rating
5
P
Printablesdandeg

Samsung Q990F Subwoofer Cover - Extended Clearance

Protective cover for Samsung Q990F based on @aballacchi_1376836 design. The original file has about 5mm of clearance from the subwoofer cone surround in its natural position. I wanted to use up some PETG I had lying around, which has the…

Downloads
230
Likes
4
Rating
0
P
Printablessquirrelf3d

Ender 3/pro/v2 Feet Riser - 38mm/45mm total clearance

This is an old design of mine, nothing fancy, simple but they work well. v1 might interfere with cases that fit under the printer. v2 has the same rail shape, but has a vertical inner wall to avoid colliding with cases that go under the…

Downloads
229
Likes
28
Rating
5
P
PrintablesJerrari

GEN2 Clearance Spacer - 185

JERRARI3D.com The GEN2 Modular System is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, it lets you print exactly what you need and customize each…

Downloads
228
Likes
35
Rating
5
P
PrintablesCalmly

Low clearance knurled screw knob for Copanko Spool holder

Tired of the original star knob lifting the spool holder off the table? Well here's your fix! This simple remix of the screw knob reduces the head size so it doesn't hit the table. This is an issue with the original model if you choose…

Downloads
228
Likes
33
Rating
4.88

Individual Clearance Tests

Clearly, I did not yet have my printer fine-tuned. In my first attempt at printing K2Van's challenge piece - a little under 4 hours to print, every nut was frozen solid. While informative, I decided that I could have learned as much from…

Downloads
226
Likes
34
Rating
4.83
P
PrintablesChya

Cylindrical Clearance Test

Simple 3d Printer cylindrical Test

Downloads
225
Likes
20
Rating
5
P
Printablesjlmeredith

Ryobi BT3000 Zero Clearance Throat Plate

This is a printable zero clearance throat plate for the Ryobi BT3000 Table Saw. This is version 3 of the throat plate and should work as printed for most cases. I am working on a v4 that will have a joint for providing a more robust…

Downloads
220
Likes
20
Rating
0
P
PrintablesMBMA

Zero Clearance insert Metabo KGS 254 M (2023)

Same model but in one piece, for larger build plates.

Downloads
217
Likes
20
Rating
5
P
PrintablesAndrew Q

Festool KSC60 Zero Clearance Insert

I have created a zero clearance insert for the Festool KSC60 sliding compound miter saw. I have added the .stl file as well as some print files for the Prusa mini. which you can just glue the pieces together. The print files are 100% fill…

Downloads
216
Likes
20
Rating
5
P
PrintablesJerrari

GEN2 Clearance Spacer - 240

JERRARI3D.com The GEN2 Modular System is a 3D printable storage solution offering ultimate flexibility and customization. Perfect for home users, hobbyists, and small businesses, it lets you print exactly what you need and customize each…

Downloads
215
Likes
28
Rating
5
P
PrintablesPeter H

Ubiquiti U6 lite/U6 LR mounting plate with extra wall clearance

Original model description: Replacement mounting plate. Indices on the inside for easy orientation. Small grooves in the mounting slit which prevent spontaneous dislodgement whilst still allowing for tool free attach- and detachment.…

Downloads
214
Likes
24
Rating
0
P
PrintablesNiiskar

Angled PC Fan Mount (120/140 mm) – Choose from Angles 15°–90°, Airflow & RGB + Clearance Test

Angled Fan Mount for PC Fans (120/140 mm) This mount allows you to install fans at an angle inside your PC case. To use multiple fans, simply print additional copies and place them side by side. This lets you direct airflow precisely to…

Downloads
211
Likes
11
Rating
0
P
PrintablesBeriBGood

Evolution Rage 5s - Zero clearance insert

This is just an adaptation using Tinkercad of the part designed by DropdeadFredd. I needed it to be 2.4 mm longer and 0.6mm thicker to have an almost perfect fit, so I did just that. Thanks DropdeadFredd for the original files. Printed…

Downloads
207
Likes
16
Rating
5
P
Printablesgrisimal

Delta 36-725 T2 Throat Plate (Zero Clearance Insert)

Parametric model designed in OnShape to create a tight fitting zero clearance insert for my Delta 36-725 T2 table saw. I printed in PLA with 15% infill and 100% infill for the area in the blade pocket to provide added support after the…

Downloads
206
Likes
23
Rating
5
P
PrintablesRickyM

Ender 3/3 Pro drawer with nozzle storage, better clearance, and thicker walls

the original was too tall and did not fit my ender 3 pro, so here is one with better clearance so it does. there is also more space in the case to accommodate for any y axis belt tensioner mods. my last issue with the original one was…

Downloads
205
Likes
25
Rating
3
P
PrintablesTami

Infinite Torture Cube v2 (0.3 clearance)

This is a remix of Infinite Torture Cube v2 The clearance between single cubes is only 0.1 in the original design. This make the cubes sometimes stick together, depending on the flow rate you use and the material you print. I decided to…

Downloads
203
Likes
18
Rating
5
P
PrintablesTB

270 hinge Left bed and plate holder remix for overhead clearance centauri carbon

Needed additional overhead clearance to get the top in due to a cabinet overhead. Matches my other remix of the 270 hinge holder.

Downloads
201
Likes
14
Rating
5
P
PrintablesJohn Butler

Kobalt TS10601 table saw Zero Clearance Insert Plate

This is a blank plate for a kobalt table saw. There is a pre made cutout for the riving knife. Need to insert 4 - 5mm threaded inserts into the 4 holes along with 4 grub screws to level the plate. I used PETG on a 400 x 400 bedslinger.…

Downloads
200
Likes
15
Rating
4