Search results: cnc

Sort order

2,898 models

CNC 3018 Drag Chain X axis

I didn't like the way the cables were hanging around the CNC machine so I made a printable drag chain. Printed with a 0.4 nozzle on 0.2mm layer height in PETG. I used a drop in T-Nut to connect the start piece and the end part clicks on…

Downloads
1,101
Likes
114
Rating
5
P
PrintablesPetr Čejka

Plasma torch conversion straight for CNC PT-60

Conversion of hand version of plasma torch. JDM garage plasma or other compatible.Holes for magnetic breakout mount. STL files printable ond standart size printer 210x210 base plate space.Includes two alternatives in .stp files and Prusa…

Downloads
517
Likes
26
Rating
5
P
PrintablesR2-Prin2

Extrusion Test Structure 3MF by CNC Kitchen

This is a PrusaSlicer project with the settings from CNC Kitchen. The Volumetric Flow starts at 7 mm³/s and goes up to 25 mm³/s in 1,5 mm³/s increments. Default settings are for the Prusa MK4. step by step to individually adjust the…

Downloads
511
Likes
33
Rating
5
P
PrintablesSpankyty

CD ROM Mini CNC Drawing Plotter With Better Tolerances

My 3mm Rods did not fit right so I made the holes a bit bigger. I also combined the motor connector to the carriage so you don't need extra work for yourself. Print instructions Resolution: 0.2mm Infill: 20%

Downloads
350
Likes
40
Rating
0

LowRider v3 CNC - KINEMATIC Tool-less Quick-Change Accessory Holder - supports laser, drag knife, pen, etc (v4.1)

HEADS UP: A new version compatible with LowRider v4 is now available. Get it here . Here's a helpful video I made about this: This is an adaptation of a Maxwell Kinematic coupling . You can read about that here:…

Downloads
317
Likes
54
Rating
5
P
PrintablesNaitsabes

CNC ploter laserowy pod moduł laserowy SculfanS9 / CNC laser plotter for the SculfanS9 laser module

Projekt elementów konstrukcji lekkiego plotera CNC pod laser SculfanS9. Wydruk ośmiu elementów pozwoli połączyć cztery profile np. V-slot 2020 w ramę, oraz na piątym profilu trzeci wózek liniowy pozwoli zamontować laser w tym przypadku…

Downloads
302
Likes
40
Rating
0
P
Printablesthedave42

Z-Axis for 3018 Pro CNC - Linear bearings and expanded height

I really wanted to use linear bearings for the X axis on the Sainsmart 3018 Pro CNC I had, but I didn't want to have to swap out the rest of the X axis as well. I made this to work with a 350mm MGN12 linear rail and MGN12H block. You can…

Downloads
139
Likes
19
Rating
0
P
Printableslukash

ChipSHOUTER and PicoEMP CNC Bracket

This is made for a CNC 3018 with ~42.5mm diameter spindle. If you have a different diameter please let me know I will happily adjust the model and add it. Allows for a very flexible Z-axis rough adjustment: You can insert the bracket into…

Downloads
127
Likes
4
Rating
5
P
PrintablesRyan

Rigid R2401 Trim Router Base for LowRider 2 CNC

I didn't like dedicating my trim router only to the LowRider 2 but since there is not a way to buy an extra base, this was my solution. Print instructions Printed using PLA (time will tell if this was a good idea). .4mm nozzle, .3mm layer…

Downloads
91
Likes
16
Rating
0
P
PrintablesJuL

Duet 3 6HC enclosure for CNC

EDIT 01/05/2023 DISCONTINUED PROJECT I'm doing à more complex enclosure with intagrated PSU and SSR Enclosure with 2 fans (120X15) for Duet 3 6HC + raspberry pi3 or pi4 + PWM to Analog converter. Need to thread M3 and M4 for boards…

Downloads
76
Likes
5
Rating
0
P
Printables100prznt

MPCNC Z-Motor Coupler HD

This heavy duty motor coupler allow the installation of large NEMA 17 motors on the z-axis. I use the 17HS26-2304S motor from Stepperonline. Fits for the "Primo" version (F 25.0 mm) of MPCNC. No other parts need to be replaced. The…

Downloads
72
Likes
9
Rating
0

Case for CNC Kitchen Threaded Inserts Soldering Tips (AP2)

Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (AP2 Style)! The model is not perfect, but it is better than the Weller version if you have an AP2 adapter I can't remember how much it weighs and how long it takes…

Downloads
50
Likes
12
Rating
5
P
PrintablesVedanshG

Low-Cost MPCNC (Lowrider v2) MDF Sled & PVC Dust Enclosure

Intro Hi! Thanks for viewing my design! I am a high school student passionate about giving back to the community, if you like what I am doing, feel free to drop a like or a comment! Vedansh Sled I built my MPCNC Lowrider with the intent…

Downloads
41
Likes
22
Rating
0
P
PrintablesRenaud

Genmitsu CNC 4040-PRO Tools holder

Add-on for the CNC 4040-PRO to hold the Probe, the tools for the collet and the 2 allen keys. The model needs a magnet (10mm or less): The magnet will hold the holder on the junction box on the Z axis and at the same time will secure the…

Downloads
33
Likes
4
Rating
0
P
PrintablesLuis

CNC Kitchen Threaded Insert Tips Holder AP 2

*** german version below *** I designed this holder to store my CNC Kitchen soldering iron tips to use for threaded inserts on my skadis wall. This works with the AP 2 tips. Printing this is quite simple, i placed supports under the…

Downloads
23
Likes
6
Rating
0
P
PrintablesDr.Enchanted

Universal CNC Drag Pen/Sharpie for ER20 Collet

Adjustable CNC drag pen for ER20 collets. With pen or Sharpie marker sleeve. To center: insert a flat substrate into the pocket and rotate pen sleeve until contact. Requires one 12mm x 3mm spring. Spring can be found under the gas lever…

Downloads
20
Likes
6
Rating
0
P
PrintablesNABATES

CNC Sharpie drawing holder

CNC Sharpie holder, uses 6mm hex nut and 20mm socket head cap screw. Could be adapted to use with other pens and pencils using a bushing in clamp. I used ¼ drill rod for shank but an option could be the clevis pin shown one of images.…

Downloads
19
Likes
2
Rating
0
P
PrintablesRudi

Deburring tool case insert for CNCKitchen

This is a modification of the Insert - Bottom (No Holders) , made to fit CNCKitchen deburrer . This is just a customized insert to the following model Deburring Tool Case 150mm (AFA Tooling) - Rugged Box Style by @Lndnny. Print settings…

Downloads
16
Likes
6
Rating
0
P
PrintablesCrami

Storage Box for CNCKitchen M5 Soldering Tips

I printed it in PLA with 0.2mm layer height and 15% infill , any other material should work. Place two 10x2mm round magnets in the center of both parts and fix them with superglue.

Downloads
15
Likes
3
Rating
0
P
Printablescookiecrook

Black Lives Matter stencil for PlasmaCutter/CNC/Printer

A black neighbor kept having their BLM sign vandalized. Literally dozens of times. Regardless of your political views, the vandal was at best damaging personal property in an attempt to suppress free speech. Anti-democracy fascist. F—…

Downloads
15
Likes
13
Rating
0
P
PrintablesDr.Enchanted

CNC Substrate Guide Wheels

Guide wheels to help the process of lifting, removing, and steering large substrates from ground to table. Helps prevent scratches to substrate. Requires one 608-2RS Bearing.

Downloads
10
Likes
3
Rating
0
P
Printablesbollibe

Nunchuck Wii adapter for CNC motor driving housing REMIX of https://www.thingiverse.com/thing:951963

Nunchuck Wii adapter for CNC motor driving housing In order to pilot the 2 stepper motors of my OPENSCAN scanner, i use a wii nunchuck connected to the CNC shield of the arduino remix of https://www.thingiverse.com/thing:951963

Downloads
5
Likes
0
Rating
5
P
PrintablesV1 Engineering

LowRider 3 CNC

Updated LowRider CNC v4, here, https://www.printables.com/model/1034840-lowrider-4-cnc This is a full sheet capable CNC router. Size is up to you within reason, tool you use, control board, firmware, and end use is also up to you. I am…

Downloads
9,643
Likes
969
Rating
5
P
PrintablesDIY Machines

Easy 3D Printable CNC Drawing Machine - Draw on Cakes, Phones, Paper, Shirts | Arduino GRBL Plotter

If you like this project please do press the like button above. It really helps me out. Thank you. 😊 How to make a simple and high quality CNC drawing machine to draw on almost anything. I'll step you through how to build your own…

Downloads
8,851
Likes
825
Rating
4.89
P
PrintablesV1 Engineering

LowRider 4 CNC

Welcome to the LR4, the LowRider CNC v4, AKA the most productive you can be while still scrolling on your phone. Let the robot do your dirty work while you scroll away and keep an eye on it working. This is a full sheet capable CNC…

Downloads
7,817
Likes
991
Rating
5
P
PrintablesV1 Engineering

Mostly Printed CNC Primo F-25mm MPCNC

Mostly Printed CNC Primo Version MPCNC "F" 25mm Version Released on 7/23/20 Questions are best asked here, https://forum.v1engineering.com/ 8/15/20 - Truck V1 (& Mirrored Truck) - added 1mm thickness to stepper mount. 8/16/20 - Error in…

Downloads
5,831
Likes
638
Rating
4.97
P
PrintablesV1 Engineering

Mostly Printed CNC Primo J-25.4mm MPCNC

Mostly Printed CNC Primo Version MPCNC "J" 25.4mm Version Released on 6/22/20 Questions are best asked here, https://forum.v1engineering.com/ 8/15/20 - Truck V1 (& Mirrored Truck) - added 1mm thickness to stepper mount. 8/16/20 - Error in…

Downloads
4,292
Likes
626
Rating
5
P
Printablesdekaware

3018 CNC workpiece clamp

This is a workpiece clamp for the 3018 CNC engraver. It can easily be used for small or medium height objects

Downloads
4,284
Likes
827
Rating
4.95
P
PrintablesCNC Kitchen

Case for CNC Kitchen Threaded Inserts Soldering Tips

Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (M900 Style)! UPDATE: All NEW cases available here: https://www.printables.com/@CNCKitchen/collections/2867288 Update 2023-08-13 Added case for V2 tip with easy-grip…

Downloads
4,184
Likes
1,161
Rating
4.91
P
PrintablesBilliam

CNC Cam clamps

A couple of cam clamps I'm using

Downloads
3,600
Likes
228
Rating
5
P
PrintablesCNC Kitchen

Threaded Inserts / Heat Set Inserts by CNC Kitchen

Get the CAD and STL models of our inserts, to use them in your designs! Purchase original CNC Kitchen Inserts in our store CNCKitchen.STORE , at Prusa, or at a ton of resellers ! Get suitable soldering iron tips at CNCKitchen.STORE , at…

Downloads
3,301
Likes
431
Rating
5
P
PrintablesMC

CNC Kitchen Extrusion Test part with Volumetric Flow Rates

edit: this File now exists on cnc kitchen's site: https://www.printables.com/model/342075-extrusion-test-structure CNC_Kitchen_Extrusion_Test_part_with_Volumetric_Flow_Rates CNC_Kitchen is not me! only wanted the file an it didn't exist…

Downloads
3,249
Likes
116
Rating
4.91

The Last Supper cnc router relief

Model size: 180x400 mm Wood used: White Pine, White Maple Stain used: Golden Pecan CNC machine used: DIY CNC Router CNC Process: For the Adaptive-Clearing Job, I used a (SPE tools ¼in up-down cut bit: Amazon link ). At 500-1500mm/min…

Downloads
3,202
Likes
242
Rating
5
P
PrintablesV1 Engineering

Makita 701 / AutoSpin T1 Tool Mount and Dust Shoe for the LowRider 4 CNC

Tool mount and dust shoe for the Makita 700 series palm router or the Sienci AutoSpin T1 and a 70mm OD or less vac hose. PETG or better if you are concerned with heat. PLA works for most routers, some new ones seem to be hotter than the…

Downloads
2,957
Likes
157
Rating
5

Drag Chain for CNC, two-piece, snap-open, 64mm radius, choose from two sizes: A=20x40mm, B=dual tracks, 20x26mm each (v1.14)

UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…

Downloads
2,884
Likes
343
Rating
4.91
P
PrintablesMona_3DStudio

Baroque Shell Oval Frame - 3D STL Model for CNC and 3D Printing

COMPLETE SET HERE: https://cults3d.com/:4425163 Want to sell physical prints/carvings of this model? Join my Patreon to get a Commercial License and access to exclusive models every month! https://www.patreon.com/cw/mona3dstudio Stunning…

Downloads
2,700
Likes
968
Rating
4.82
P
PrintablesV1 Engineering

Mostly Printed CNC Primo C-23.5mm MPCNC

Mostly Printed CNC Primo Version MPCNC "C" 23.5mm Version Released on 8/29/20 Questions are best asked here, https://forum.v1e.com/ Print instructions https://docs.v1e.com/mpcnc/PParts/

Downloads
2,621
Likes
205
Rating
5
P
PrintablesNikodem Bartnik

DIY Dremel CNC

Dremel CNC was designed with simplicity and ease of build in mind. With a list of easy-to-buy components and mostly 3D-printed parts, it's one of the easiest and cheapest ways to get into hobby CNC machining. Dremel CNC was already built…

Downloads
2,461
Likes
1,944
Rating
5
P
PrintablesCNC Kitchen

CNC Kitchen TEST HOOK

This is the test hook I've been using in many videos to test the strength of various 3D printed materials. My usual print settings can be found here: https://www.patreon.com/posts/filament-test-16238656

Downloads
2,458
Likes
213
Rating
4.93
P
PrintablesPlexi

Drawing Robot - Arduino Uno + CNC Shield + GRBL

The DrawBot is similar to the commercially available AxiDraw. It is powered by an Arduino Uno controller, uses a CNC Shield, and GRBL firmware. The approximate cost to build the DrawBot is $100. Recently some makers of the Drawing Robot…

Downloads
2,437
Likes
536
Rating
4.83
P
PrintablesDET-Man

CNC X-Carriage Add-On Parts for VORON Stealthburner (Vitalii3D)

The VoronLightweightXCarriage by Vitalii3D 🥰 is a fantastic lightweight carriage for the Stealthburner but I was not happy with the existing cable management solution for a ClockWork 2 setup. So, time to make some parts. The Features A…

Downloads
2,420
Likes
18
Rating
0
P
PrintablesV1 Engineering

Makita 700 Series Mount and removable dust shoe for the LowRider 3 CNC

Print at 30%+ infill, fits ~48mm OD Vacuum hose. Vacuum hose gets a cable tie on the upper tool mount and one to the top of the core. It can take a bit of muscle to get the hose zipped in initially but it will soon conform to the curves…

Downloads
2,357
Likes
107
Rating
5
P
PrintablesV1 Engineering

Makita RT700 series (65mm) mount for the MPCNC Primo

This can be a tight fit, rotate so you can get to the collet lock if you do not use two wrenches. The tool also needs to be angled either direction so the corner of the top housing does not hit the bolt heads. No calculator offset needed,…

Downloads
2,273
Likes
139
Rating
4.89
P
PrintablesRavenkeeper

E3CNC - Ender 3 Pro based CNC!

This is an Ender 3 Pro based CNC! Watch it in action here! Build manual here! We now have a Discord! EnderCNC's GitHub Check out the user-builds !…

Downloads
1,990
Likes
906
Rating
5
P
PrintablesSnappy DIY

T-Track Clamp, T-Nut Halteklammer 100mm M6 für CNC und andere

100mm T-Track Clamp, T-Nut Halteklammer 100mm M6 for up to 50mm Materials Flexible adjustable holder and Knob for M6 Support: yes only in the Slot Infill: 60% Gyroid Infill M6 Set Washer, Screw, Bolt…

Downloads
1,739
Likes
489
Rating
4.75
P
Printablescejones2

CNC Clamp

This clamp is based on the Carbide3d Essential clamp . I needed a clamp that was a little bit longer. The Fusion 360 model is parameterized so you can change the length if you want. The STL/3MF model is 5 mm longer than the original. The…

Downloads
1,608
Likes
197
Rating
5
P
PrintablesErik van de Pol

MPCNC Primo Nema17 drag chain mounts

Drag chain mount for MPCNC Primo, remixed from thing https://www.thingiverse.com/thing:4613811 . I chose to attach the drag chains directly to the Nema17 steppers with a design that straps around the motor and kept in tension with a…

Downloads
1,549
Likes
103
Rating
5
P
PrintablesPyrex

AR-15 80% Lower Receiver Machining Fixture for X-Carve CNC

This fixture is designed to machine AR-15 80% lower receiver fire control group pockets. The receiver is affixed vertically to facilitate FCG pocket machining. The fixture is designed to screw down to the 75mm on center M5 bolt pattern of…

Downloads
1,519
Likes
276
Rating
5
P
PrintablesMax

CNC Hold down clamps (All sizes, OpenSCAD)

Varying sized clamps for using has hold downs on CNC table. I find it best print them lying down on the side, support is needed. Generated Clamps Options for bolt sizes M3, M4, M5 Lengths 25mm-150mm Heights 3mm-100mm OpenSCAD The clamps…

Downloads
1,355
Likes
235
Rating
5
P
PrintablesV1 Engineering

Jackpot CNC Control Box for the LowRider 4 CNC

Easy print LR4 specific Jackpot CNC Control Box. 6 Qty - M3x10mm hold down the board and lid. The optional Fan can be a 5015 (2 - M3 x 20mm) fan or a 5010 fan (2 - M3 x 15). Voltage should match your board input and wired directly to…

Downloads
1,344
Likes
69
Rating
5
P
PrintablesPyrex

AR15 Receiver Engraving Jig for X-Carve CNC

This is a quick jig i made to hold an AR15 level for engraving. It has been designed with mounting points 75mm on center to match an X-Carve CNC wasteboard. Two of the M5 thumbscrews are used to secure the jig, the third M5 thumbscrew…

Downloads
1,286
Likes
210
Rating
5
P
PrintablesPedja

Aluminum profile 15180x300 (CNC 3018)

3D model of aluminium profile 15180 used for CNC 3018. Dimensions 15 x 180 x 300 mm. There is also DXF with cross section drawing. Print instructions Category: Machine Tools Summary 3D model of aluminium profile 15180 used for CNC 3018.…

Downloads
1,088
Likes
85
Rating
5
P
PrintablesAakaar Lab

Mostly 3D printed CNC 3018 DIY

Hello friends Here we altered the 3018 DIY cnc with mostly 3d printed CNC The design is completed. Alluminum Extrusion required all are 2020 slot 220 mm 2 nos 350 mm 6 Nos 8mm ROD 400 mm 2 Nos 360 mm 2 Nos 110 mm 2 nos Bearing LM8UU 10…

Downloads
1,054
Likes
109
Rating
0
P
PrintablesSpamBouncer

3018 DIY CNC: T8 Leadscrew / Anti Backlash / Spring-loaded nut Bearing Block for Y Axis

In addition to my remix of the bearing block for the floating bearing of the Y-axis , I have constructed a bearing block for backlash-free spindle nuts (Anti Backlash) for the Y Axis. This makes it easy to replace the ragged standard…

Downloads
1,043
Likes
87
Rating
4.67
P
Printablesdjos_1475

3018 CNC - Ultimate X-Axis Upgrade using MGN15H Linear Rails and a High Power Spindle

This Upgrade gives you the Ultimate 3018 CNC Machine - PCB's and Aluminium can now be milled accurately. Build Steps: Remove the old X-axis rods and Z-axis carriage Loosen the vertical X-axis mounts and slide them as far rear as they'll…

Downloads
1,036
Likes
142
Rating
5
P
PrintablesCNC Kitchen

Case for CNC Kitchen Threaded Inserts Soldering Tips (Weller)

Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (Weller Style)! CNCKitchen.STORE…

Downloads
1,019
Likes
240
Rating
4.97
P
PrintablesBuildModHack

Diy Mini Cnc Router / Mill Plans

Updated on 7-29-23 - Y Axis plates & drill guide (.stl .dxf .pdf) It can be made with (Mdf, 3d Printed or Laser Cut) "Just Follow This Post For Updates" I will have all the plans done soon but for now i will upload the end plates (.dxf…

Downloads
1,011
Likes
115
Rating
0
P
Printableschris_kwng

Modular CNC 3018 Pro Z-Axis Upgrade

This is a modular CNC 3018 Pro Z-Axis upgrade I have created a while ago. It is highly optimized (for usage as well for printing, e.g. water drop holes, etc.) but still work in progress. More details will follow in future.

Downloads
967
Likes
75
Rating
3

Flat mount Starlink case for CNC/large printing

Flat Starlink case designed to be cut with a CNC. The total dimensions of the finished case are 554.35mm x 344.8mm x 30mm+height of whatever plastic you use for the lid Instructions: CNC case. I used a 560mm x 350mm x 30mm piece of…

Downloads
966
Likes
39
Rating
0
P
PrintablesPlexi

Arduino Uno CNC Case / Enclosure

Customized version of http://www.thingiverse.com/thing:1264391 This Arduino Uno + CNC Shield enclosure is for my Drawing Robot https://www.thingiverse.com/thing:2349232 This is a work in progress. Print Settings Printer: HyperCube…

Downloads
956
Likes
62
Rating
5
P
PrintablesJevermeister

DIN Rail DM542 DM556 CNC stepper driver mount with M4 heat inserts

You will need M4x6x5 heat inserts. If you would like to use something else or screw straight into plastic, there is also a .step provided. M4x10 screws are a perfect match for attaching the stepper drivers but make sure the head isn't too…

Downloads
952
Likes
76
Rating
5
P
PrintablesV1 Engineering

Pen and Drag Knife mount for the MPCNC Primo

Compliant mount for 11-12mm Drag Knives, and/or 11mm-50mm Pens and markers.

Downloads
952
Likes
58
Rating
5
P
PrintablesBuildModHack

Cnc Hold Down / Clamps for Desktop Milling Machine & Sanding Tables/ Openbuilds, Mpcnc, Shapeoko, xCarve, Diy Cnc Routers T-Slot

Also included .dxf files for milling Can also be used with 5/16" or 8mm Bolts and washer just insert the nut in the knob How I Designed This Category: Tools

Downloads
950
Likes
189
Rating
5
P
PrintablesSir Kuhnhero

3D Printed CNC Router

This machine was designed with the goal of being fully 3d printed. The price for this machine (Excluding control electronics) is about 600$. The frame is made up of 2020 and 2080 extrusions. The motion is handled by MGN15H linear rails,…

Downloads
928
Likes
164
Rating
0
P
PrintablesJimmyV

Arduino CNC Shield Case

Case para Arduino UNO R3 con el CNC Shield. Incluye botón de reset.

Downloads
908
Likes
94
Rating
4
P
PrintablesV1 Engineering

52mm Spindle Mount for MPCNC Primo

Generic tool mount for most 52mm spindles. Print instructions 45% infill is probably more than enough, 2+ perimeters (1mm+ walls) Fits the MPCNC Primo version only. https://www.v1engineering.com/

Downloads
884
Likes
28
Rating
5
P
PrintablesEdgarMata

MY - Laser CNC_V2

This is my design for a CNC Laser for more information you can visit My-Laser CNC Oficial Page Still in development i'm building two prototypes one for me and one for a client. If i make any changes i post here, but please keep in mind…

Downloads
884
Likes
142
Rating
5
P
PrintablesLearn As You Go

CNC Mini Laser Engraver 2040 V-Slot Y-Plates, X-Plates And Legs

Openbuilds 2040 V-Slot The plates are 8 mm thick and are designed for 2040 v-rail. Y-Plates: One of the plates is designed for a Nema 17 stepper motor and the other accommodates a 16 mm f625zz flanged bearing. X-Plates: The back plate is…

Downloads
878
Likes
188
Rating
5
P
Printables_cybermouse_

Gridfinity CNC Tool Holders by Zack Freedman

CNC bit storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at…

Downloads
877
Likes
118
Rating
4.71
P
PrintablesV1 Engineering

DeWalt 660 mount for the MPCNC Primo

Basic mount. On the top mount the word "UP" should be mounted so it can be read properly. The clamps have a rounded corner side and a chamfered side, they match the mount part. You will need to rotate the spindle lock to make the mount…

Downloads
830
Likes
42
Rating
5
P
PrintablesEhrich

40mm CNC end mill

This is a model of a 40mm end mill, which rough dimensions were taken from a real life 20mm end mill. This was a gift for my fellow CNC-machinist student for completing his apprenticeship.

Downloads
830
Likes
62
Rating
5
P
PrintablesNikodem Bartnik

Cable chain for IndyMill CNC machine

Simple parametric cable chain designed for IndyMill CNC machine. There are two versions, 20mm that can be used with 2020, 2040, 2080 and so on aluminium profiles and 40mm version that can be used with 2040, 4040 and so on profiles. Thanks…

Downloads
819
Likes
53
Rating
5
P
Printables3D-Muc

Over 23 different tuning parts for your 3018 CNC

Over 23 different tuning parts for your 3018 CNC Look at the photos to see the functions Printed with PLA or PETG Have fun I have printed: 3D printed components 2x limit switch holder X-axis 2x limit switch holder Y-axis 1x Z-axis limit…

Downloads
818
Likes
122
Rating
4.5
P
PrintablesAlfred

MPCNC Primo Drag Chain Support

This drag chain support for the MPCNC Primo replaces the regular Truck Clamp. It is for the 25mm version (F) and is suitable for a 30 x 15 mm aluminium strip which can be found at your local hardware store in 1m lengths. (at least here in…

Downloads
806
Likes
70
Rating
5
P
Printablesaraymbox

Arduino CNC Shield Case

A case for the arduino uno grbl cnc shield v3. 60x60 fan ventilation holes USB cut out 5x GX12 ports (12mm) 1x XT60 port 4 mount points

Downloads
790
Likes
112
Rating
5
P
PrintablesThomllama

3D Printed CNC Clamp

Added Knob2 with softer edges as the original knob kinda hurt! (Nov 12 2022) Just added Spiky back clamps for side pinning the board better (July 1 2022) Simple CNC parts clamp. There are others but couldn't seem to find one I liked, and…

Downloads
763
Likes
64
Rating
4.8
P
PrintablesBoopidoo

CNC Clamp M6

Clamp for CNC with knob and slot nut for M6 hex screw. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture. https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6

Downloads
753
Likes
118
Rating
5
P
Printablespstimpel

CNC 3018 Z-Axis Upgrade

I had enough of this freaking spindle delivered with the CNC 3018. So I ordered a 500W spindle, and took the opportunity to to some upgrades. Result: More rigidity of the whole Z-Axis No wiggling More accurate toolpaths More Z range More…

Downloads
748
Likes
59
Rating
5
P
PrintablesTaylorsMake

CNC low profile clamps

UPDATE: Please find fusion 360 file below to edit and adjust as you which, this was an unfinished prototype so perhaps you can make it better. Low profile clamps that can work with either T tracks or 6mm nut inserts that you see in common…

Downloads
740
Likes
103
Rating
4.5
P
PrintablesTomTom

CNC Clamp / Clamping Claws M6

Clamping Claw in two sizes with M6 thread for a CNC my recommendation: -> petg -> 250/70 degrees celsius

Downloads
736
Likes
116
Rating
5
P
PrintablesDesignCircle

CNC controlled coil winding machine

Features: Can wind coils with a diameter of up to 12cm and the length depends on the aluminium profile, acme screw and linear slide that is used and can be as long as needed. I tested it with a winding speed of 500 to 250 windings per…

Downloads
735
Likes
95
Rating
5

LowRider 3 CNC - control box case for BTT SKR Pro 1.2 board and a BTT TFT35 E3 touchscreen (v1.2)

Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…

Downloads
732
Likes
57
Rating
5
P
PrintablesLes Kaye

CNC 3018 Pro Cable Tidy Set

CNC 3018 Pro Cable Tidy Set Tidy up the loose cables of your CNC 3018 Pro. I provide a STL file of all clips which will fit on my print bed together with the individual component files in case you need to rearrange them or reprint some of…

Downloads
701
Likes
77
Rating
4.5
P
PrintablesMaciek

Low profile CNC clamps

I was looking for a low profile CNC clamps, which clamps material from the side of the material, not from the top. I wanted to have access to all the top surface while milling, not covered by any clamps. My clamps has 15deg angle, so they…

Downloads
689
Likes
97
Rating
5
P
Printablespaho

CNC Clamp 2mm to 18mm

Clamps for holding down your workpiece on a cnc router. The clamps are designed for holding down materials with a thickness of 2mm to 18 mm. There are 3 different sizes for the bolt that goes through, M5, M6 and ¼ inch. Best is to use a…

Downloads
686
Likes
96
Rating
4.83
P
PrintablesTaylorsMake

CNC End Mill Router Bit Tray

Lightweight, small foot print organiser for CNC end mills and router bits. Designed to hold up to 24 bits in a tool drawer or on top of your work surface. Honeycomb infill lets dust and debris fall through the bottom for easy cleaning.…

Downloads
684
Likes
109
Rating
4.75
P
PrintablesChar

CNC Kitchen Heatset Insert for Rugged Multipart Pinecil/TS100Case (V2)

I took the Pinecil/TS100 Top Large B insert from the original case and modified it to hold the CNC Kitchen Heatset tool and tips. I also changed the stand holder to be easier to remove by pressing on the base.

Downloads
684
Likes
143
Rating
4.73
P
PrintablesJohnOCFII

CNC Tramming Tool

The CNC Tramming Tool is a simple 120mm object with two holes – 1 for a ¼" end mill, and the other for the 8mm shaft of a dial indicator. It is used to tram your CNC to ensure the router/spindle is as perpendicular to the build surface as…

Downloads
677
Likes
83
Rating
5
P
PrintablesLe John

CNC Clamp M6

A simple clamp to combine with M6 screw and nut. You can also use my own nut and button set. In view of the high mechanical stress, I recommend printing with PC Blend filament and print with at least 8 solid layers on the bottom and the…

Downloads
648
Likes
103
Rating
5
P
PrintablesSrFerrete

Láser CNC

En esta ocasión he creado una CNC láser muy similar a las que se venden comercialmente. Sus piezas pueden ser impresas en 3d y además añadiremos algunas piezas que he sacado de esta misma página. He creado un manual, con lista de piezas,…

Downloads
645
Likes
121
Rating
5
P
PrintablesSweet1227

Gridfinity Pinecil CNC Kitchen holder organizer

Built an “all in one” for my Pinecil soldering iron, CNC Kitchen adaptors, and accessories. I used the Fusion 360 GridfinityGenerator plugin by Lev Mishin for the base model - great resource!…

Downloads
644
Likes
132
Rating
5
P
Printablesgiufini

CNC Drag Knife (SLA Optimized)

This drag knife can be used to cut almost anything you would cut with a utility knife and it easily fits into your CNC router, making it a universal fit for almost any CNC router available. The tool has been designed to use a utility…

Downloads
640
Likes
99
Rating
5
P
PrintablesV1 Engineering

DeWalt 611 Mount and removable dust shoe for the LowRider 3 CNC

DeWalt 611 Mount and removable dust shoe for the LowRider 3 CNC. Print at 30%+ infill, fits ~48mm OD Vacuum hose. Vacuum hose gets a cable tie on the upper tool mount and one to the top of the core. It can take a bit of muscle to get the…

Downloads
637
Likes
31
Rating
0
P
PrintablesV1 Engineering

LowRider 3 CNC Blank tool mount

Here is the Makita 700 series Fusion 360 CAD files, you can edit this one or back it up to get the raw block. https://a360.co/3vbUQFX Step files, for other CNC programs.

Downloads
637
Likes
30
Rating
0
P
Printablesnj1337

PCB Holder cnc 3018 pro

Hello, This is a PCB holder for my CNC. To avoid vibrations, I advise you to place a plastic plate printed with 100% filling of 1.5mm Under the plastic plate, I put a piece of polystyrene Beware of dust ! I use vegetable oil on my PCB to…

Downloads
633
Likes
58
Rating
0
P
Printablesnids

CNC Low Profile Pull Down Side Clamp

Low profile pull down clamp for fixing a workpiece from the side on a (cnc) machine/router. This is helpful for facing operations where the toolpath covers or extends the area of the workpiece and any clamping from the top would be in the…

Downloads
632
Likes
66
Rating
5

[unofficial] LowRider v4 DIY CNC, gantry back covers, hinged for opening, and can pop out and back in, plus "tie downs" for them, and an in-gantry Jackpot mount

This is unofficial, not needed for a functional LowRider 4, and offers primarily cosmetic (aesthetic) benefit (for the most part; the “tie downs” do have some zip tie slots that could be used to help with wrangling wires, and the back…

Downloads
623
Likes
78
Rating
4.8
P
Printablesalien hitman

CNC 3018 Pro Upgrade Z - Axis

Update 24.12.2021 By popular demand (which means more than one), a recess for the X-axis stepper motor coupling has been added. (Happy New Year :)) After I didn't find a single Z-axis upgrade for the CNC3018 that really worked, I decided…

Downloads
614
Likes
77
Rating
0

DIN Rail Mount for MESA 7i96S I/O card for Plasma CNC (v1.0.0)

Note: Several of my designs for my CNC plasma rig are available here for free, and several others are exclusively for my supporters on Patreon that support for any amount, even if only a dollar a month.…

Downloads
612
Likes
30
Rating
0
P
Printablesaferreiro_21

CNC Dremel

For tool holder: 1xDrill_1_base_v2.1 -- Estimated time: 4h53m 1xDrill_1_Top_Big -- Estimated time: 1h4m 1xDrill_1_Top_Small -- Estimated time: 21m 1xDrill_1_Top_Small_vacuum (optional) -- Estimated time: 35m For Y trolley (edited):…

Downloads
596
Likes
194
Rating
0