Search results: collar

Sort order

915 models

P
PrintablesTrachtorBeam

Olympic Barbell Collar

PRINT, ASSEMBLE, and USE AT YOUR OWN RISK Barbell collars can be cheap or expensive… I figured I could make custom ones for 3D printing gym enthusiasts! Two sizes are available in the zip folders: Ø2" will fit slightly loose on Olympic…

Print approx. €6.67–€8.15 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,126
Likes
305
Rating
4.75
P
PrintablesDarkstar1972

AirDog - An Air Tag Dog Collar Holder Remix of Rephlex00's excellent design

Remixed the excellent work of Rephlex00 to suit my need. I simply elongated the tabs that hold on to the collar so they'd hang on to it more. As originally designed my 55lb pitties shake the AirTag off when they shake their heads side to…

Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant

Downloads
503
Likes
63
Rating
4.4
P
Printablesshkarlsson

AirTag Pet Collar Clip (Lowest Profile)

I believe it's more discrete than other designs because it doesn't have the “roof”, instead there is just an inner ridge on top keeping the tag in place while letting the silvery part of the tag be visible. Prints well with PETG and brim.…

Print approx. €0.30–€0.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
156
Likes
26
Rating
5
P
PrintablesLevi

Barbell Collars

Two different versions uploaded depending on your grip strength. The short handle can hold several hundred pounds per clip, but can be difficult to load on the bar. Both work great for bench, deadlift, and squats on a 2" standard bar.…

Print approx. €2.86–€3.49 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
72
Likes
11
Rating
0
P
Printablescrashkg

Triton 3HP Router Collar

I want to make a dust shroud to protect the router in the router table from dust so I started by modeling the body of the router and making a cylinder clamp to attach to it. I made one with a relief hole for the power cable that can sit…

Print approx. €3.17–€3.88 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
13
Likes
2
Rating
0
P
PrintablesDebolestis

E27 Lamp Shade Collar Ring

I have lost this part for my lamp so I made one. Inner thread diameter is 40mm. Tested in PETG.

Downloads
2,593
Likes
391
Rating
4.71
P
PrintablesGCV3D

Collar Stays

Overview I always seem to lose my shirts' collar stays when doing laundry. Luckily, they are simple and fast to print! 3D printing collar stays also allows for easy customization, like the chevrons I've included on the version I printed.…

Downloads
2,099
Likes
836
Rating
4.95
P
Printables3DPS

Pet Collar Tag

Using Open SCAD you can quickly enter your dogs name and your phone number to create a flexible tag that can be worn on your dogs collar. Very easy to use Open SCAD software and you simply click the STL button (once you have added your…

Downloads
1,816
Likes
464
Rating
4.8
P
Printablesrh224

AirTag Case For Backpack, Camera Bag Strap or Pet Collar

Version 2.0 Now Available The new version has a thicker base structure and inset guides to strengthen the arms and provide overall better grip. Much less chance of the case slipping off the strap or deforming over time and the overall…

Downloads
1,777
Likes
720
Rating
4.74
P
PrintablesGregory

AirTag Holder for Collar

Collar Holder for Apple AirTag. Currently I have models for 25mm, 20mm, 15mm, 13mm and 10mm dog/cat collars. If you need different size message me and I will add it. Require minimal supports to print, you can find support configuration in…

Downloads
1,732
Likes
220
Rating
4.94
P
Printablesstuckpixel

Barbell 2" Collar / Barbell Clamp - Print-in-Place

Learning from my first design, this is a 2" barbell collar/clamp that is entirely print-in-place. No additional hardware required. I printed mine with a .6mm nozzle and .2mm layer heights – but a 0.4mm should work just fine as well.

Downloads
1,531
Likes
171
Rating
4.67
P
PrintablesMaciaIT

Simple Barbell Collar v2 (50mm 28mm 26mm)

This is the simplest barbell collar you'll find on the Internet! I hate complex designs so I made my own collars to prevent using supports, custom pins, TPU... Hope you like it!! If so please leave a like You'll need some easy to find…

Downloads
1,363
Likes
234
Rating
4.59
P
Printablestmackay
18+

The source marked this model as adult content.

Downloads
1,336
Likes
362
Rating
5
P
PrintablesDebolestis

E14 Lamp Shade Collar Ring

I have lost this part for my lamp so I made one. Inner thread diameter is 28mm. Tested in PETG.

Downloads
1,198
Likes
184
Rating
4.82
P
PrintablesAsphalt3D

FurFinder - Apple AirTag Collar/Strap Attachment

Track your furry friend with ease using this collar/strap attachment designed to hold an Apple AirTag. The ergonomically rounded corners ensure that your pet won't experience any irritation, and the minimal profile prevents the attachment…

Downloads
925
Likes
139
Rating
5
P
PrintablesPasta
18+

The source marked this model as adult content.

Downloads
733
Likes
186
Rating
0
P
Printablesmoofie

Death Star Light Globe - 3.25” collar

Light globe for a ceiling fixture with a 3.25” OD neck. I like that it hangs from my ceiling “upside down Rogue One fashion” instead of with the laser aperture disc “above” the equator as it’s depicted in ANH and Jedi. I did notice that…

Downloads
727
Likes
418
Rating
5

V0 Umbilical Collar

An adjustable umbilical collar for the Voron V0. fills the gap between your chamber and electronics compartment to keep the warm air inside. keeps your umbilical away from the belts. BOM 2x M3x6 or M3x8 BHCS 2x M3 Heatset Insert Assembly…

Downloads
681
Likes
159
Rating
5
P
Printablesnpopson

AirTag Holder for Pet Collar / Strap (flexible TPU)

No special settings required, outside of what you do to print TPU normally. I did 3 walls, 15% infill, with 95A TPU. The slicer setting “Avoid crossing perimeter walls” is helpful if you have issues with TPU stringing. I prefer to insert…

Downloads
669
Likes
120
Rating
5
P
Printablessurt91

Schneckenkragen (Slug Collar)

The Schneckenkragen will keep away slugs from your plants. But make sure that they are not hatching inside or find bridges, i.e., leaves of the plant touching the ground outside. Print in PETG (or ASA) for UV resistance. Also print a brim…

Downloads
654
Likes
65
Rating
5
P
PrintablesJay

Dillon 550C Primer Cup Collar

This is an extended collar for the Dillon 550 primer cup to keep spent primers from ending up on the floor. Tested on a 550c press but should work for all 550 series presses. There is enough clearance so the primer chute does not rub on…

Downloads
579
Likes
54
Rating
5
P
PrintablesJon LaRue

E26 Lampshade Collar

My 3 year old and our dog knocked over his lamp and broke the E26 collar. Rather than ordering online I used it as an opportunity to use the power of community and 3D printing to find a model or find a model to re-purpose for my needs. I…

Downloads
568
Likes
43
Rating
5
P
PrintablesFlo4Print

Intex Pin - Nail - Clou, with collar - Collerrette, piscine

Intex tubular swimming pool Intex pin Intex nail Horizontal version, it contain a little pin and will be perfectly oriented in your slicer. Print it horizontaly with 2 or 3 layers, verticaly it will broke. You must use support. Clou…

Downloads
525
Likes
60
Rating
5
P
PrintablesGearomatic

Anti-Roll Collar compatible with Shure Microphone

Anti-Roll Collar compatible with Shure Microphone. We could not find the original to purchase. Was designed around the Shure ULXD2 but may fit other models Works with rigid filament, but may be better with a flexible filament.…

Downloads
515
Likes
33
Rating
5
P
Printablesgeektoybox

AirTag Holder for Dog Collars or Backpack Straps (F3D included)

3 part print that holds an AirTag on your dog's collar or any strap up to about 30mm wide and 3mm thick. Fusion360 file included so you can easily make it fit your collar/strap. Printed at .2mm layers, 3 perimeters in Prusament Azure Blue…

Downloads
488
Likes
101
Rating
5
P
PrintablesBlack_Wolfie

Dog Collar Air Tag Holder

The other designs for Airtag holders for dog collars did not meet my needs, so I designed this one. Use some small wood screws to join the two parts together. If you like my design, you can buy me a coffee !

Downloads
470
Likes
141
Rating
5
P
PrintablesFootloops

AirTag Dog Collar Mount

An AirTag mount you can attach to your dogs collar. This was designed for a dog collar with a width of around 22mm. Please measure yours before printing. Furthermore, this was designed for TPU ONLY. Please print it in TPU. I personally…

Downloads
465
Likes
50
Rating
4.89
P
Printablesthall72
Downloads
462
Likes
55
Rating
0
P
Printablesstuckpixel

Quick Release Barbell Collar / Barbell Clip for 2" bar

Quick release Barbell Collar/Clamp for a 2" bar. Current design requires 4x #6 1" construction screws. Print 1x: cylinder.stl, clamp.stl Print 2x: part-1.stl, part-2.stl, tpu.stl (I printed in TPU but you can print in PLA) The clamp is a…

Downloads
460
Likes
129
Rating
5
P
PrintablesTube Guy

LPS Necklace Collar Pack | Littlest Pet Shop Accessory

Wanted to make these for a family member and decided to post them online for everyone to use. They are made a bit larger than normal to give room for larger necks so you can make them a bit smaller if you want. These include: Normal and…

Downloads
459
Likes
49
Rating
5
P
Printablesmathiaspl20

Adjusting Ring / Shaft Collar 8mm, 10mm M3

Adjusting Ring / Shaft Collar 8mm, 10mm using a M3 Nut and Bolt. Choose a 12mm bolt, 10mm may be sufficient. The 8mm one will fit around TR8 / T8 Spindle like shown in the picture. Print instructions Category: 3D Printer Parts Summary…

Downloads
448
Likes
21
Rating
5
P
PrintablesKYZ Design

KYZ HSW Cups and Collars - 9 Sizes Each

Introduction Pretty self explanatory, put your stuff in here! The collar can be positioned at different heights relative to the cup to accommodate different item sizes. The size refers to the internal diameter. Designed to fit onto HSW…

Downloads
447
Likes
105
Rating
5
P
PrintablesMistertech

Portable Air Conditioner Accordion Duct Collar for 5" ducts

This is a collar to mount flexible, 5" accordion duct to a drop ceiling or plywood, etc. It screws in to the duct. The outside diameter is 169mm to allow it to be printable on most printers. I have added a second model that includes screw…

Downloads
434
Likes
76
Rating
5
P
Printables3D Printy

Scarf and Collar for Posable Penguin Fidget

A scarf and collar to keep your posable penguin fidgets warm. Download the base model here https://youtu.be/QvqppWoIySs https://youtu.be/M_sV88fGf2U Printing No supports required. No infill required. Brim recommended for bed adhesion.…

Downloads
434
Likes
98
Rating
5
P
PrintablesMartin

Stargate Jaffa Armour - Collar and Shoulder Pads

This is the second part of my own Stargate Jaffa Armour. This Armour will be an amalgamation of the Armour worn by Anubis in the Movie and the Armour of the Serpent Guards from the show. I call it “Roayal Serpent Guard Armour”. This part…

Downloads
421
Likes
121
Rating
5
P
Printableslunch211

Numatic Henry Hoover Vacuum Hose Collar Nut

UPDATE 2025: 38mm hoses are now supported, but I have released here on Cults3D I am still using the same part printed in PETG in 2023! This has stood the test of time but now my nozzle has failed, so here is a new model to repair the…

Downloads
416
Likes
36
Rating
5
P
PrintablesPippa

Air Tag Holder - pet collar/wrist band

I could not find an air tag holder that printed easily as most required supports for overhangs. This gives a tight fit when printed with PLA The other tags in the final photo are all available to download from my account Credit to Xuis…

Downloads
415
Likes
43
Rating
5
P
PrintablesLyndon Black

AirTag Cat Collar Clip

Track you Cat with an AirTag. Find out where they play or if they get lost. Hold the Tag close to the cat so it doesnt annoy them like the keyring style holders.

Downloads
410
Likes
69
Rating
4.2
P
Printables626abad71b
18+

The source marked this model as adult content.

Downloads
400
Likes
130
Rating
5
P
PrintablesTinkerTiger

Drill Bit Stop Collar Set (mm.)

A series of drill bit stop collars to prevent drilling deeper than absolutely necessary. In the generally most used EU sizes. 5mm 6mm 8mm 10mm 12mm Each collar should print in about 20 minutes. If you want other sizes added, tell me in a…

Downloads
385
Likes
43
Rating
5
P
Printablesdonutboy3

Scooby Doo Collar Tag

Scooby Doo Collar Tag Category: Accessories

Downloads
385
Likes
32
Rating
5
P
PrintablesWallK

Sanding block for Circular Sock Knitting Machine collar

This is a very simple model I created to help me sand tracks and inside features of Circular Sock Knitting Machine collar Just glue 600 or finer sandpaper to the underside (and a sidewall if you want to sand inside wall surface) I'd…

Downloads
373
Likes
85
Rating
5
P
PrintablesAviv Halevi

Cam lock 1/2" Hex collar for FRC teams

this model is a shaft collar for 1/2" Hex shaft which is commonly used by FRC robotics teams. It is designed so you would not need any tools to open and close it. it has two main features, it can lock and open with a cam lever and to can…

Downloads
369
Likes
18
Rating
4.5
P
PrintablesNEXA PRODUCTS

AirTag Dog Collar

Simple AirTag holder for dog collars. The idea The idea behind this project is that the airtag should fit slightly inside the support and be supported and held in place by the collar itself. Printing I 3D printed mine in SUNLU PLA, 0.2mm…

Downloads
364
Likes
43
Rating
5
P
Printablesnzalog

Dog AirTag Collar remix - Easier to print with F3D file

Made some modification: tighten tolerances around hex nuts reduces bulk of back (to avoid back pressing on dog) made it easier to print (see image for recommended print orientation) tighter fit to my pup's Julius K9 harness. matched the…

Downloads
357
Likes
35
Rating
5
P
Printablesfrijoles

Collar Stay

This is my current collection of collar stays for my dress/work shirts. These are modelled from my actual collar stays that came with my work shirts which needed replacing as some broke over time and others went AWOL. I suggest printing…

Downloads
349
Likes
54
Rating
5
P
Printables626abad71b
18+

The source marked this model as adult content.

Downloads
347
Likes
84
Rating
5
P
PrintablesTacoDimension

Blank Dog Bone Tag for Dog Collar

Blank Dog Bone Tag for Dog Collar

Downloads
346
Likes
16
Rating
5
P
PrintablesMSB

Parametric Shaft Collar - Clamp Collar

This 2 piece clamping collar can be be customized in F360 to a wide range of dimensions. The geometry is tied to parameters for easy modification to suit the job at hand. It is made of two symmetric halves, so once you save the STL, be…

Downloads
345
Likes
30
Rating
5
P
PrintablesKPTexan

Apple AirTag Holder for Dog Collar

This is an AirTag holder I designed for a dog collar. You'll unfortunately need some basic sewing skills to attach it, but I think this is the most durable and streamlined way to accomplish this. That being said, it's quite easy if you…

Downloads
342
Likes
81
Rating
5
P
PrintablesEvoLabs

Olympic Barbell collar with quick release

Olympic Barbell collar/clamp/clip with quick release handle and TPU grip pads (essential for good clamping force). Features Quick release handle. TPU printed Grip pads. Variants Fully 3D Printed - hinge joints are 3D printed. Single part…

Downloads
338
Likes
39
Rating
5
P
PrintablesKiwi Tinkerer

Garmin Alpha 200i / 100 + Collar T5 / TT15 Charging Station

Make Your Own Custom Charing Station using these 3D Printed clips Go have a look at your current charging setup now, I bet the wires are all tangled! I have included designs for a basic charger station that has cable channels on the back.…

Downloads
334
Likes
23
Rating
5
P
Printablessbuerger

Fully parametric lens (tripod) collar, Arca plate

WARNING: Found that this file does not work properly with current Fusion versions anymore. You may still try it, but if strange things happen when editing parameters, I will not be able to help... ********** Note: I've designed a second…

Downloads
320
Likes
29
Rating
5
P
PrintablesAviv Halevi

0.5in Hex Banana Collar for FRC

This is the second version of my print in place shaft collar for 0.5in hex shafts. I call this version the Banana collar! This new version is a total redesign of the old model, it improves the gripping force substantially and reduces the…

Downloads
316
Likes
22
Rating
5
P
PrintablesdePrintinator

Dog Collar AirTag Holder

This is an Apple AirTag holder that slips over a dog collar or harness. A bit of extra hardware is needed to assemble it: 4x m3 heat set inserts such as these . 4x m3x8mm bolts You can print out of any filament, but ASA/PETG will do…

Downloads
312
Likes
52
Rating
4.2
P
PrintablesLewisFlies

Sportdog Shock Collar Remote Replacement Knob

This is a replacement knob for the remote control on a Sportdog brand shock collar . It has 8 settings. I labeled the first one “T” for trainer. The next 7 settings are the actual shock settings. I printed it upside-down, which makes the…

Downloads
305
Likes
5
Rating
0
P
PrintablesJC

Air tag case for 3/4 in Strap or Dog Collar

Wanted an air tag case to put on a dog collar that: Securely held the air tag Securely attached to the collar Has a small, rounded profile that won't be too big on the collar What I came up with was a model that uses 2mm (M2*6) screws to…

Downloads
300
Likes
63
Rating
4.5
P
Printablesjkoether

Fractional Drill Bit Stop Collars

These are drill collars (aka stops, bushings) to set up for specific repeatable hole depths. Includes all 1/64 increment sizes between 3/32 and ½. I used 4 different general sizes and made all the intermediate sizes with a python…

Downloads
300
Likes
76
Rating
5
P
PrintablesElectric Fjord

1/8" CNC Bit holder with Collar Bits - Carvera (Air)

This is 1/8" Bit holder with Collar made for my Carvera Air. Collar 7.6mm. Large and small version. Both have Numbers going out or inwards. Whatever is preferred. For a single color printer the easiest is just to get the slicer to request…

Downloads
290
Likes
47
Rating
5
P
PrintablesMA
18+

The source marked this model as adult content.

Downloads
288
Likes
81
Rating
5
P
Printableslamboolars

Samsung smarttag 2 Snap-clip for cat collar

Fillet edges, and way smaller than other clips. This version can be used with smarttags that have their rings removed. (See smarttag breakdown videos) Edit: now tested in real life → cat is reluctant at first (see pictures) but then no…

Downloads
280
Likes
27
Rating
5
P
Printablesthall72

Lego Compatible (26066.dat) Minifig Collar Fur

This model is compatible with the lego system.

Downloads
276
Likes
37
Rating
0
P
PrintablesLinas LY2H

Guy Rope Collar for the 10m Spiderbeam Fiberglass Mast

It's a guying rope collar to support the guying ropes on the 10m fiberglass mast from the Spiderbeam company. The outer diameter of the collar is 110mm, the inner diameter - 53.4mm (this includes some 0.4mm overlap for the bead of…

Downloads
276
Likes
21
Rating
5
P
PrintablesSoulta

GPS Antenna Collar-Clip for Tracker/Garmin/Ultracom

This is meant to be a replacement fr the Antenna clip that is usually shipped with Collarmounted Dog tracking GPS (i.e. Tracker, Garmin or Ultracom Collars). Since they usually break early in the products life i decided to print a sturdy…

Downloads
272
Likes
8
Rating
0
P
PrintablesFoden

Epson Interactive Pen Collar

This is a repalcement for the black plastic collar that fits on the end of the following Epson pens (it is NOT available as a spare part and is ALWAYS getting broken) Interactive Pen A - Orange Model: V12H773010 Interactive Pen B - Blue…

Downloads
264
Likes
14
Rating
5
P
PrintablesUteknitty

Collar needle lift cam A and B higher

The hight of the parts got increased to lift the needles higher to help especially when knitting heels.

Downloads
257
Likes
34
Rating
5
P
Printablesdontbother

Dyson V12 Detect Wand Collar

Dyson V12 Detect Wand, replacement top collar. Update: 29JAN2024. Still going strong.

Downloads
256
Likes
12
Rating
5
P
Printables3Diocrity

Barbell Collar or Clamp for 50mm Olympic Barbell

Barbell Collar or Clamp for 50mm Olympic Barbell This is my take on a one piece print for a barbell collar/clamp. I have yet to print it, so it may need some tweaking. Should probably be made with PETG or ASA. If you are handy and have a…

Downloads
255
Likes
17
Rating
5
P
PrintablesMichaelP

BentoBox 5015 Blower Fan Exhaust Collar

To enhance the efficiency of the fans in my BentoBox, I aimed to pull more air through the filtration stack and reduce intake from gaps around the 5015 blower exhaust ports. As a quick solution, I designed a collar to achieve a better…

Downloads
252
Likes
27
Rating
0
P
PrintablesSteve

Parametric Clamp/Shaft Collar (Fusion 360)

Open in Fusion 360 and adjust the parameters to meet your needs. Parameters should be self explanatory.

Downloads
251
Likes
17
Rating
5
P
PrintablesSpectrum3847

Spectrum 3847: 3D printed 1/2in Hex Collar

This collar is based on the AndyMark am-1526 hex collar. This should be used for light-duty applications and prototypes We recommend buying the am-1526 for higher load applications. The collar is to be used on ½" Hex shaft. Use with a ½"…

Downloads
245
Likes
15
Rating
5
P
Printablesfixfell7

Shift Boot Collar Holder Retainer universal (v3)

Shift Boot Collar Holder Retainer Compatibility : 3/8 - 16 3/8 - 24 1/2 - 20 5/16 - 18 M8 x 1.25 M10 x 1.25 M10 x 1.5 M12 x 1.25 M12 x 1.5 M12 x 1.75 M16 x 1.5 example (civic 2007) : probably won't touch this file again so if you do…

Downloads
240
Likes
14
Rating
5

Airtag dog collar mount

Basic Airtag collar mount to track your dog anytime and anywhere. Printed out of semiflex TPU.

Downloads
232
Likes
69
Rating
5
P
PrintablesAmyMakes3D

Dog collar name tag

A bone shaped dog collar tag that has room for a name and contact detail to be added to. Quick print at around 20-30 minutes. Name can be added using a sharpie or by remixing the model to add your own letters.

Downloads
226
Likes
40
Rating
5
P
PrintablesAndreas G

Collar Stays Card

Introducing the CollarCard: three sets of collar stays in credit card format. The stays are 9, 10 & 12 mm wide.

Downloads
225
Likes
94
Rating
4.5
P
PrintablesdePrintinator

Collar/Bag Strap AirTag Holder

Summary I designed an AirTag holder for a standard 1 inch/25mm (or smaller) collar. It's strong, filament efficient (about 4g), secures without any hardware, and allows for easily embossing your contact information and pet's name on the…

Downloads
224
Likes
46
Rating
5
P
PrintablesHumbarth

GoPro mount for dog collar

A simple Gopro mount for a dog collar. Fits collars with 20x4mm.

Downloads
223
Likes
23
Rating
5
P
PrintablesBen

Collar Stiffener Card (x6) - EDC Kit

A 'collar stiffener only' version of my EDC (Emergency Debonair Card) I had a few requests to make just the collar stiffeners, so I made a credit-card sized version that holds 6 collar stiffeners. There's also a mini x2 version here. Key…

Downloads
220
Likes
107
Rating
4.75
P
PrintablesDan Royer

Customizer shaft collar

Say you have a gear spinning around a shaft. Printing the gear takes a long time and the shaft connection is the hard part to get right. Makes sense to print the bit next to the shaft separately and then screw it onto the gear. You might…

Downloads
219
Likes
24
Rating
5
P
PrintablesNinomalbinho

Paw Holder - For Dogs Collar And Lead

Just something nice to know where Collar and Lead of our beloved pets are... Easy to print, no support needed. Can be printed in bicolor to get a nice look (I chose to paint mine because I did not have any Black PLA left ;-) ) Waiting for…

Downloads
216
Likes
47
Rating
5
P
PrintablesAmmar Faridi

Shirt Collar Streightner

Enhances and maintains the shape of a perfect shirt collar by providing support that prevents shirt collar drooping, sagging and folding of the collar and plackets under the weight of a jacket. resize as needed , Print with brim.

Downloads
214
Likes
33
Rating
0
P
PrintablesFlyBy Tom

Sortimo 1x1 Bin - Label Collar

A quick and easy way to add a label to Sortimo 1x1 bins. Just pressure fits into the bin and is easily removed if you want to change it around. Made this to compliment the 1x1 Insert Dividers I also made for the 1x1 bins. 1x1 Label Collar…

Downloads
213
Likes
58
Rating
4.5
P
PrintablesBasementLAB

Wall Split Flange Cover Slide-in - Pipe Collar / Copritubo per idraulica

Wall Split Flange Round Escutcheon Plate Cover for Various Pipes / Pipe Collar / Copritubo per idraulica Pipe Ø: Ø 20.7mm/ 0.81 inch Ø 25.8mm/ 1.1/2" Ø 29.9mm/ 3/4" inch Ø 33.7mm/ 1" inch Resize to adjust dimension If you download/enjoyed…

Downloads
211
Likes
30
Rating
4.5
P
Printablesthall72

Lego Compatible (27325.dat) Minifigure Neck Collar Fur Smooth

This model is compatible with the lego system.

Downloads
210
Likes
37
Rating
0
P
Printablesinno3design

Pipe Collar - 22 mm Escutcheon - Rosette Cover Ring for Wall or Floor

These collars are designed to neatly hide the gap between your wall and heating pipes. The two halves snap together firmly, so they appear like a single piece from some distance. Small elastic features on the inside help keep everything…

Downloads
210
Likes
52
Rating
0
P
PrintablesArea51

Radiator Pipe Collar (escutcheon ring)

Well, I needed some radiator collars (escutcheon rings) for the new kitchen floor - the sizes available in the nearest hardware store would not fit, and I have a 3D printer, so... There are models for 17, 27 and 34mm pipes - If you have…

Downloads
210
Likes
32
Rating
5
P
PrintablesKevin Dubon

Dije Para Collar de Perros 2 colores

En cura importar los 3 stl y agruparlos para que se organicen adecuadamente, luego desagrupar para imprimir cada stl por separado, (la base se imprime sola y el borde con el cubito serán la segunda parte, además de agregar las letras que…

Downloads
209
Likes
19
Rating
0
P
PrintablesDog Box

Yo I Heard You Like Words on Your Dogs... (Jumbo Collar Letters)

JUMBO COLLAR LETTERS!!! (like those name bracelets) Make sure the most important information about your dog (or large cat) is easily visible with these fun, jumbo clip-on letters for your pet's collar. 60mm letter height . Print with…

Downloads
205
Likes
43
Rating
0
P
PrintablesStewView FPV

FI Mini Pet GPS Case and Collar Mount

The FI Dogs Mini GPS tracker is great, but it comes with these rubber sleeves to mount to collars that are not sturdy or trustworthy in any way. After months of using a series of zip ties at all times to keep from losing the tracker,…

Downloads
203
Likes
9
Rating
5
P
PrintablesStep1makeart

Saw Guide Collar for cutting 1" , 1-1/8" , & 1-1/4" Bike Steerer Tubes

Saw Guide or Cut Guide collars for cutting bike steerer tubes down to size. Designed for Metal Steerer Tubes. Slightly undersized to ensure a tight fit on the steerer. Carbon Steerer Warning: Clamping anything on a carbon steerer tube…

Downloads
203
Likes
19
Rating
5
P
PrintablesCustom Craft

Hueso para collar de perro

Hueso identificador de nombre para perro

Downloads
200
Likes
1
Rating
4
P
Printablespropellerhead

Sotabeam Travel Mast Guy Collars 22mm and 34mm ( amateur ham radio )

These are 34mm and 22mm guy collars for the incredible 10 meter Sotabeam Travel Mast. I made this eye balling the ones available on the Sotabeam website. They should work on other masts as well. These collars will slide over one of the…

Downloads
199
Likes
34
Rating
0
P
PrintablesRiskable

SAVE HAND SANITIZER AND SOAP (Parametric Hand Pump Dispenser Limiter/Collar)

Consumer bottles of liquid soap and hand sanitizer are designed to dispense too much ! For liquid soap you only need a little bit for it to do its job (break the surface tension of water) and for hand sanitizer you only need enough to…

Downloads
196
Likes
26
Rating
4.67
P
PrintablesBilliam

Modular Dewalt DWP611 router collar (quick release)

This is a remix of the MPCNC quick release router mount to provide a slightly modular place to mount accessories. Print instructions Fed the original through netfabb to fix geometry issues. Removed the actual frame mount in the rear to…

Downloads
193
Likes
39
Rating
4
P
PrintablesMalku Ecuador

COLLAR PERSONALIZADO PARA GATO / CUSTOM NECKLACE FOR CAT

You can find the other model in our profile or by clicking on the following link: https://www.printables.com/es/model/579523-collar-gato-cat-necklace

Downloads
193
Likes
17
Rating
0
P
PrintablesLeda777

collar perro

cuello persobalizado

Downloads
192
Likes
15
Rating
5
P
PrintablesMarti Segura

Quick Release Barbell Collar 25mm, 28 mm y 30mm

Its design allows for precise adjustment without the need for tools, making it easy to change weights during your workout at home or at the gym. Simply slide the clamp onto the bar, push it until it is tight against the disc and secure it…

Downloads
187
Likes
23
Rating
0
P
PrintablesJohn Meadows

Barbell w/ Plates & working Collars for Dummy 13

Note: this is an accessory for the Dummy 13 figure created by soozafone, which you can get here: https://www.printables.com/model/981111-dummy-13-version-10 I designed an Olympic barbell for Dummy 13 figures, complete with functioning…

Downloads
185
Likes
53
Rating
5
P
PrintablesKrumpleFootskin

Safety Whistle with Handsfree Lapel/Collar Clip

Description This is a remix of @BakedBean3D “ Compact Dual-Chamber Whistle V2 ”. I saw a request from some whistle-blowers that they needed a whistle that was accessible if their hands were occupied. I think different clothing options…

Downloads
183
Likes
36
Rating
5
P
Printables3DNightmare

Sipikes Collar with Interchangeable Spikes

Do you want a unique and stylish collar that reflects your personality? Sipikes is the perfect solution. With its interchangeable spikes, you can create your own custom design and change in whenever you want. Sipikes is made of…

Downloads
182
Likes
49
Rating
5