250 models
25 Common Vegetable Stake Labels Size 135mm X 10mm X 1.2mm LAST layer prints the letters so use a different colour filament on that layer if you wish. The biggest challenge for these as they will be outdoors will be the heat of the sun.…
Print approx. €3.39–€4.14 excl. taxPreliminary estimate for one variant
With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
FISH CARP FRESHWATER COMMON KAPR RYBA
Print approx. €3.78–€4.62 excl. taxPreliminary estimate for one variant
After 3D printing for the past 5 months I finally decided to come up with my own, bespoke, tool storage. I don't like attaching tools to the printer as the clutter bothers me and they tend to be in the way when I need to change nozzles or…
Print approx. €5.71–€6.98 excl. taxPreliminary estimate for PETGSource material: PET
FISH FRESHWATER COMMON RYBA
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
A se of vacuum hose attachments of different shapes. There are 7 different nozzle shapes, each at three different angles. They are all repeated for all common hose sizes. Each size has an option of Outer Diameter measurement or Inner…
Hose adapters for all common (at least what I could find online) hose sizes. All adapters have: Each size has an option of Outer Diameter measurement or Inner Diameter. Outer Diameter (OD): Intended for the printed tube to go inside your…
These are the creative commons skins for my LED track system. Please remix, and share your own custom skin patterns. See Video:
Hose splitters for all common (at least what I could find online) hose sizes. Designed to need minimal support. When printing suggest you stand it on the single end. If needed add support in the center of the split. All adapters have:…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Hose adapters with a 90deg bend for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on each connector,…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Hose adapters with a 90deg bend smooth transition for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on…
A farmer, bar keep, bar maid, and half orc barkeep with a kitty! Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page…
Time to Gridfinitize your pocket change. I arranged the stacks in size (diameter) order which is sure to soothe the OSD in some of you, as opposed to denomination order, which is sure to trigger the OSD in some of you 🫠 The step file is…
Car chassis for common yellow geared motors You will need 8 M3 bolts for mounting the motors to the body Category: Robotics
Hose adapters with a 45deg bend for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on each connector,…
This will act as a repository for the parts that are common to my Modular Ammo Boxes. Updated parts will be added here before they are moved to the individual box files, so look here for the latest files. The ammo boxes are now in the…
Resized for common affordable exacto knifes found in Europe, anywhere from hardware stores to Aldi.
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Barbed tube fittings for splitting and connecting multiple different sized soft tubing together. Has Barbs to give a secure fit on the hose. Designed to need minimal support. Print standing up with larger end on the bed. Brim might be…
Easy to print hook for your heater. Have printed it myself from PLA and works well. The model is available in different sizes. Starting at 15.0 mm diameter heater tube, up to 25.0 mm in 0.5 mm increments. I recommend choosing the next…
A collection on well fitting vacuum hose adapters for the Dewalt DW735 planer. I have this planer and designed the adapters to provide a snug fit similar to that of the factor adapter. Adapters that have a bend have 4 retaining position…
the camera mount from the five33 whoop These mounts are designed and used by Team BlueEyes in the Italian Whoop League 30 deg 35 deg 37 deg 40 deg print settings: infill: 100% use tree supports fillament: tpu .2 layer also on thingiverse:…
Hose adapters with a 45deg bend smooth transition for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on…
Hose adapters with a 30deg bend for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on each connector,…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Originally Built by FrostyBird @ Thingiverse https://www.thingiverse.com/thing:5879291 Repaired in Microsoft 3D Builder Scaled to Standard Starship Model Scale 1:2500, 1:1400, 1:1000 and 1:350 According to production designer Dave Blass,…
Stencil, A - Z, 0 - 9, Common symbols. Prints a stencil with capital letters and numbers .5" high when printed 100%. Printing in transparent PETG would make this stencil easier to use.
10, 20, 38, 36, 40, 60, 100 teeth gears
Hose adapters with a 30deg bend smooth transition for all common (at least what I could find online) hose sizes. All adapters have: Sizes are for the inside of the hose (outside of the adapter) 40mm long connector at each end 3mm taper on…
This is a set of common parts for my HPA adapters for glock type magazines. To assemble you need: 2 springs (may be get from automatic pen and split it by two pice); 4 m3*8 screws; 1 m2*14 screw or any 2mm thing to fix button; Hpa parts:…
P Clips for securely mounting cables and wiring harnesses/looms using M6 fasteners. Available in sizes 5 to 60mm outside cable diameters. Ideally printed with a flexible filament. I print mine in TPU with a high wall count. PETG may also…
This consists of the common Swing Arm parts that attach Umbilical Tower hoses to the Saturn V rocket . This are part of the larger Apollo Umbilical Tower model. Notice that when adding these parts, some parts are the same from level to…
Realistic replica of a common myna. The model features feather texturing along the model. I recommend printing it at a finer layer height or with an SLA printer. I sculpted the model in Zbrush, and did some clean-up and scaling in Blender.
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a page for the common V-Spooler options that fit V-Spooler , V-Spooler X and V-Spooler Mini . They are available pre-sliced for Prusa XL and Bambu printers, and also in un-configured 3MFs for other devices. Clamp &…
Spring loaded DSLR/Mirrorless lens caps in common sizes (52mm/55mm/58mm/62mm/67mm/72mm/77mm/82mm)
The Omniburner! Supported Extruders: Papilio and Papilio Lite - by myself (The Esel nennt sich always first) Sherpa Mini - by Annex Orbiter V2 - by Róbert Lőrincz LGX Lite - by Bondtech TBG Lite - by Triangelab This is a modified Mini…
For measuring a range of sizes from 1/8 inch to 2 ¼ inches. I was able to print the text with a 0.6mm nozzle, but I would recommend 0.4mm to make the text easier to read. Printing the top layer(s) in a different color makes it much easier…
New Version - https://www.printables.com/model/1911094-common-setting-to-change-for-better-printing The following PDF contains custom settings that work better than the default profile included with the Flashforge Creator 5 and Creator 5…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
If you have any suggestions for improvement, feel free to share them as a comment.
If you often change the nozzle in your printer, or if you have several printers with different nozzle diameters, this nozzle indicator will come in handy. By turning the wheel, you set the dial according to the nozzle size you have…
Sometimes the need arises to perform the representation of small circles, something that is quite difficult to do with a common compass, this tool tries to help in the process. It is a tool known as a diameter template. In the corners…
This simple jig allows you to quickly and accurately measure common metric thread pitches. Printing takes only a few minutes. The gauges are small and can be easily carried with you at all times, for example in your wallet.
This allows you to use the newer Bambu style isolator feet with your adventurer. I modeled and tested them with some cheaper Amazon ones - but they should all fit. Please let me know if you find some are too tight/loose.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Introducing the 3D Printable Flexi Common Side-Blotched Lizard. This intricately designed model captures the essence of the fascinating side-blotched lizard, known for its distinctive patterns and agile movements. Key Features: Realistic…
25 Common Vegetable Signs These were designed for PETG FILAMENT (but PLA is fine off course). I've printed them out on a Bambu Lab X1 Carbon, and they print well. The sharpness of the end is reduced compared to the other models I've put…
This is the multicolor design I made for the common egg from Palworld by modeling a chicken egg and studying the patterns from the game. My custom nest model to fit this egg (as well as real chicken egg, think dyed Easter egg) is…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
These are reproductions of the common curved and straight train tracks that come with many wooden toy train sets (such as Brio, Orbrium, Thomas, etc). Created in Fusion 360 with a few tweakable parameters including track length for…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I watched Common Side Effects and loved the little creatures that everyone who had taken the blue angel mushroom started seeing. I couldn't find any 3D printable files for these little guys, so I made one using Nomad Sculpt on my iPad. It…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A webcam holder to mount common webcams on Voron 2.4 and 3D printers using 2020 extrusions. Specifically, this mount fits webcams that have a horizontal tube-like hole in the back. I have included the Autodesk Fusion 360 files.…
20 Common Herb Stake Labels Size 135mm X 10mm X 1.2mm LAST layer prints the letters so use a different colour filament on that layer if you wish. The biggest challenge for these as they will be outdoors will be the heat of the sun. PLA…
Wanted to make some custom stamps to use on postcards I'm sending out but couldn't find anything that matched what I needed. I've included a sample of a text stamp (can easily be customized in Fusion 360) as well as some funny ones of my…
Gear Box Back to use common type 80T CNC pulley Let ERCF V2 use common type CNC metal 80T pulley There is nothing wrong with 3D printed plastic 80T pulley, instead, I think it's one of the most useful invention of the year, because 80T…
A 'chibi-fied' ~1/5th scale Common Berthing Mechanism hatch, like those on the International Space Station. Note: The mechanism does not work at this scale due to friction and lack of rigidity. All files provided without tolerances added…
This enclosure is specifically designed to fit my common-mode RF choke built with 12-turns of RG-58 around an FT240-43 ferrite toroid (this is optimized for 40m to 20m HF, but G3TXQ has measurements for other bands as well). The enclosure…
This is a follow up of my previous model for War of the Ring (2nd ed) fast setup insert. With this insert you can store both the Lords of Middle Earth and Warriors of Middle Earth expansions in the Warriors expansion box. It is composed…
A common egg f4om grow a garden
I remixed this model for print orientation and more common fittings
"Day-Date" calendar add-on for common quartz clock movement Contrary to the wrist watches, clocks with mechanical calendar are hard to find. This 3D-model adds a calendar function which shows the day of the week and date mechanically to a…
A simple mount for a common 10.26" DVR / touch screen dash cam and CarPlay unitA simple mount for a common 10.26" DVR / touch screen dash cam and CarPlay unit. Note: You'll also need a CD bay insert it can mount to,…
These ae additional parts that are required to complete the Crazylite 7 assembly and are used on all versions. In this listing are two x-axis end stops, one for early Ender 7 s (mk1) & one for later Ender 7's (mk2). This part replaces the…
most small spice bottle are 40mm or 45mm diameter. Here is my setting for this print: material : any should works fine, I have printed in PETG wall count : 2 top/bottom layer count : 4 layer : 0.2 support : None raft/brim : None Infill :…
These syringes full of UV glues have no manual way to dispense the material inside. Instead they want you to buy a gun that costs more than the glue ($15 to $40). That's fine if you are using it to often like to make a living. So I…
Update few parts to support switch push button and lipo battery charger. I addition I add place to magnets to better hold the cap, I used 20 X 6 X 2 mm Neodymium. I user 18650 lipo battery with the following charger:…
Making a Meshtastic BBS? Here's a way to mount your Station G2 from B&Q Consulting together with your Raspberry Pi Zero 2 W. https://shop.uniteng.com/product/meshtastic-mesh-device-station-edition/…
common anomaly y endstop block to go with https://www.printables.com/model/324787-voron-v24-and-trident-y-endstop-relocation-mod Edited: 1/19/25- add step file
20 Common Herb Stake Labels (Hollow Letters for Single Colour Filament) Size 135mm X 10mm X 1.0mm The biggest challenge for these as they will be outdoors will be the heat of the sun. PLA will melt, bend, twist with sufficient heat. I…
These are NEMA17 stepper motor models in the following sizes: 42-30 42-34 42-40 32-48 42-60 The shaft lenghts are variable with 16mm, 18mm and 22mm options. The shaft has a diameter of 5mm.
Make your 3D print projects great again - Here is a collection of common screwless joints you can use in your project. Feel free to edit these on my Tinkercad . PRINT SETTTINGS 0.2~0.24mm layer height 0.4mm layer width Supports required…
Update (22.11.23): Made the Jst Hole a bit more snug. Update (28.11.23): Switch now as a bit more space. was to tight Created as an option to keep physical endstops with the CA X Beam. Particularly useful when using TMC5160 stepper…
Common Anomaly / Whopping Pochard's Elite Machined Ultralight X Beam with CNC XY Joints for Voron 2.4 and Trident does NOT COME with any X ENDSTOP provisions…. I fixed that.…
Werkzeug zum Abziehen der Glühkerzenstecker ohne eine Spezialgange (VW 3314). Tool for removing glow plug connectors without a special tool (VW 3314).
We didn't bring our fume extractor. And it take a long time for us to consider what is suitable for the workbench. Since it still need to take more time to select a nice commercial one. How about just build one for minimum requirement for…
The innovative Wick Press and Centering Tool employs a straightforward yet efficient operation. You just need to place the wick into the hole on top of the stand, invert the glass on the slider, and press. Within moments, it guarantees a…
This thing clips over either end of the mount that many blinds are attached to so you can hang curtains over them. There is a 14mm slot for a curtain rod and little nubs that correspond with the holes on the blinds mount. It is not 100%…
Size : 7cm x 7cm x 1.1cm The sizes are approximately! Ask us for custom designs! We are located in Buenos Aires, Argentina. We print 3D cutters, topper cake and more! Find us on our Instagram : @argentina3dprintings Web page :…
A collection of common utility placeable components for the Bumbag Customizable Enclosure System including cable management, mounting posts, screw-from-underneath cutouts, vents and fans. cut_under_m3cs Creates a countersunk cut-out for…
20 Common Herb Signs These were designed for PETG FILAMENT (but PLA is fine offcourse). I've printed them out on a Bambu Lab X1 Carbon, and they print well. The sharpness of the end is reduced compared to the other models I've put up. The…
From Thingiverse: Hi, holder to install an HP server PSU DPS1200 fb into an ATX PSU form factor. Enjoy ! Print Settings Printer brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament brand: amazon Filament…
This model fits my particular breakout, labeled “ATX64P6-N02 VER003”, very well, but may need tweaking for others if their dimensions aren't the same. All the dimensions are variables in the OpenSCAD file, so it should only be a matter of…
I designed these parts to solve the X endstop mounting challenge on my Voron 2.4 build, specifically for the combination of the Common Anomaly UltraLight Aluminum X Beam , the LDO Nitehawk SB (umbilical), and the ChaoticLab Tap V2 . Since…
I quite often need to quickly draw something with round edges. I find out it helps me to start with these using the “use” directive like "use <round_cube.scad>.
Lid for yogurt pots with a standard capacity of 500 grams and a outer pot diameter of approx. 94.5 mm. Design was done for different yogurt pots sold in Austria. There are slight differences in the outer diameter of the cups in the tenths…
I really liked the customizable battery case by walter: https://www.thingiverse.com/thing:57281 but you have to use thingiverse clunky customizer to generate the size you want. This is a small modification that puts the lid next to the…
I am NOT a fan of sensorless homing, I like my endstop switches. This mount bolts to the bottom right common anomaly cnc x joint and your good to go. Fits: all known voron toolhead types with endstop switch on the back. Tested:…
Disc air intake cover for a common form factor of cast iron combination belt/disc sanders with a 6-inch disc. My model is an older Ryobi BD4601, but if you have a similar model, and the under-table intake looks the same as the last photo,…
Dust protection caps for some of the common connections on SCUBA diving equipment and hoses: LP inflator stud (like the one on most BCD low pressure inflators); second state thread (like the one on second stage regulators); second stage…
Overview: After commiting to buying my Elegoo Centauri Carbon i had a task to modify it so that i could place the printer in the perfect spot in my home. That is,in a corner with the rear and right sides against the walls. Therefore the…
A box I made for an inline 1:1 common mode choke. It was made as part of a video for my you tube channel. Search youtube for my callsign, KB9RLW. The torroid is a T130-2 size wtih insulated 18ga wire and it fits perfectly. Category:…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu Black Transmission Distance: 0 PLA Sunlu White Transmission Distance: 7.7 This print uses 2 unique filaments Swap Instructions: Start…
I had an ATX power supply running my A8 until recently...traced bed-heating problems to an overloaded ATX12V output that had started going bad. I replaced it with a 750W HP server power supply with a PCIe breakout board that had…
