Search results: cono

Sort order

Counting matching models…

P
PrintablesJake

Gridfinity lite - economical plain storage bins

Zack Freedman's Gridfinity system features thick bases, scoops and label areas so make a system that is highly functional. These economical storage boxes trade-off functionality and aesthetics in an attempt to reduce print time, filament…

Downloads
20,239
Likes
3,010
Rating
4.96
P
PrintablesReferentiel

Economical stringing test

This test part is optimized so that you can print it quickly to achieve many iterations in a short period of time without wasting too much filament.

Downloads
3,235
Likes
141
Rating
4.94
P
PrintablesEqubuxu

Reinforced Economical Gridfinity Bins - No vase mode (w/ half grid)

Printing I printed the bins with both 0.4 mm and 0.6 mm nozzles, both work fine. There are all variations of the bins from 1x1x1 to 7x7x10, in regular- and half-grid variations (although most are obviously untested). Recommended settings…

Downloads
1,672
Likes
303
Rating
4.96
P
PrintablesUnsullied

Economical Vesa Laptop Stand / Mount

This is a laptop mount for vertical vesa stands. I split the model in two halves to reduce printing cost and time. It easily supports my macbook air 2020 but take caution for your laptop, your mileage may vary. I used 4 m4 screws and nuts…

Downloads
921
Likes
183
Rating
4.92
P
PrintablesJohnOldman

Economical Resistor Storage Rack

I spent a long time trying to find a good way for stroring resistors but couldn't find anything that was both easily accessible and small enough to fit into my drawers upright. Each tube is 64 mm tall, so it fits in e.g. an IKEA Alex…

Downloads
855
Likes
159
Rating
4.9
P
PrintablesFilaments.ca

Filaments.ca EconoFil™ MINI Refill Coils 0.5KG Master Spool

Mini Master spool for use with Filaments.ca EconoFil™ MINI REFILL Coils. After more than 4 years since introducing our original refill coils and master spool, there is now a mini (0.5kg) version! Happy Printing! Print flat with no…

Downloads
729
Likes
77
Rating
4.78
P
Printabless3sebastian

Ultrafast and economical stringing test

There are already many calibration and test parts to get rid of the stringing of your printer, but this one is optimized so that you can print it quickly to achieve many iterations in a short period of time without wasting too much…

Downloads
703
Likes
27
Rating
5
P
PrintablesSimTechRC

Economical modular drawers with 1L volume each

Modular drawers, inspired by https://www.printables.com/model/72750-modular-organizer-drawers-alternative-design/files, but with all-new models of outer boxes and increased volume of drawers with a lot of changes and improvements. I tried…

Downloads
616
Likes
251
Rating
2.5
P
PrintablesGabriel Z

Simple Economical Logitech G502 Mouse Pinky Rest

Simple Logitech G502 mouse pinky rest, no need to replace any original part. Simply attach it to the bottom mouse grooves with any mild adhesive, I used sticky putty, but double sided tape should work fine, the mouse and hand weight will…

Downloads
609
Likes
74
Rating
4.67
P
Printablesgeekifier

Gridfinity Blade Disposal Bin (Economical)

My take on a 2x1 Gridfinity bin for disposing of utility and craft knife blades. Uses roughly half the filament vs some other designs. Friction fit for 6x2mm magnets. Parametric Fusion file to tweak the magnet holes as needed. Skipping…

Downloads
528
Likes
88
Rating
4.93
P

Mate tipo Stan (reconocida marca)

Mate tipo STAN para polimero escalonado, dimensiones y medidas exactas 20% de relleno 3 perimetros 3 inf 3 supe

Downloads
512
Likes
36
Rating
0
P
Printablesmgg gg

CROCS JIBBITZ EMOJI, EMOTICONOS, CHARMS, PINS

Son pins para poner en tus crocs.

Downloads
422
Likes
94
Rating
5
P

Gridfinity Bin with Printable Label Economic

Updated 12-26-23 Fixed thin wall at bottom. Great bin model, but didn't want/need the magnets. So you get the extra bit of room, and a savings of about 40% time and filament. No parametric, my newbness broke it. Enjoy, and please give the…

Downloads
406
Likes
34
Rating
5
P
PrintablesKerndrup

Holder for caulking gun cartridges (economy version)

These holders har small and thin on purpose so they are cheap to produce in large quantities. If you need a big and very solid product - this is NOT it. But the will hold up to normale use just fine. Hope you like it.

Downloads
395
Likes
106
Rating
0
P
PrintablesGabriel Z

HSW Fast Economical Screwdriver Holder - Remix -Fixed

Big size screwdriver holder, flat on the bottom and smaller body height, so it prints faster and with less filament. All credit to the original models, this is just a simple remix. --Now on correct scale/unit. --V2 has a bigger gap on the…

Downloads
392
Likes
53
Rating
5
P
PrintablesDaTryhard22

1/10 Scale 18 Inch Traffic Cone - Economy Style - High Detail Base

Here is a highly detailed 1/10th scale model of an 18-inch tall traffic cone. This cone can be easily customized with the painting tools in the slicer if you want to make it multicolor. The included .3mf file is for Bambu Lab printers.…

Downloads
320
Likes
61
Rating
4
P

The Clare Embroiderer's Assistant: Ergonomic, Economical, and Easy to Use

Introducing the Clare Embroiderer's Assistant! The Clare table stand is your third hand, giving you the fine adjustability of a handheld hoop while leaving both of your hands free to stitch. From her place clamped to the table, she brings…

Downloads
239
Likes
127
Rating
5
P
PrintablesJuan Chinluego

Conos imposibles

Conos imposibles (de encontrar)

Downloads
234
Likes
12
Rating
0
P
Printablesvivid

Economic Weight Plates Holder

DISCLAIMER: I noticed the weak point of this model is the screw in mechanism. It would be much better to merge both parts and print it in one go. Made to be as rugged as possible while also saving filament (~62g). Multiple sizes…

Downloads
223
Likes
65
Rating
0
P
PrintablesMakerMylo

Master Refillable Spool - Filamentive Economy Spool Replacement for AMS/MMU/ERCF/Reprak

This is a simple no hardware required, easy to print spool, Simply cut away the cardboard spool and fit some cable wraps/ties around the filament, slide it off the cardboard, onto the plastic then screw the 2 halves together and snip the…

Downloads
223
Likes
26
Rating
3
P
PrintablesE3roo

Economic Pocket Hole Jig

Economic Pocket Hole Jig remix Removed unnecessary material. Remixed from: https://www.thingiverse.com/thing:3643808

Downloads
218
Likes
37
Rating
5
P
PrintablesBottega.co.nz

Starwars Iconographic - Hueforge

Please share your prints Print at 100% infill with a layer height of 0.08mm with a base layer of 0.20mm Filaments Used: PLA PolyLite Pro Black PLA PolyLite Pro Red PLA PolyLite Pro Metallic Silver PLA PolyLite Pro Cold White Swap…

Downloads
215
Likes
89
Rating
5
P
PrintablesMultiverso 3D

Economic Roller Spool Holder

I liked the design of the "Roller Spool Holder" but needed to print a few of them and was short on filament, so I decided to remake one compatible with the end-caps and PVC tube used, but only about 60% of filament required (made…

Downloads
210
Likes
14
Rating
4.5
P
PrintablesSync Prism

Economic Quick Swap Filament Dry Box

Design features Affordable (~$25 for 4 units + printing time) Fully sealed Adjustable width to accommodate different containers and spools Steal Pins instead of more expensive and narrower Ball Bearings Option to not modify the original…

Downloads
209
Likes
51
Rating
5

Fast and economical BED LEVELING

this a bed leveling print by pasa2004 on Thingerverse and its great and I use it always.

Downloads
189
Likes
12
Rating
5
P
PrintablesIsaac Kailola

Ender 3/5 (plus) bedlevel-test FAST Economical

This print is made for testing whether you have set your bed correctly or not. The print is one layer thick and doesn't take long. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports: Doesn't Matter…

Downloads
165
Likes
4
Rating
4
P
PrintablesSG Newb Rider

Ikea Alex Handle Economy (inc handle for newer Alexes)

I removed part of the handle from the original to save on material and printing time. Does not affect functionality or cosmetic look of the original. No support needed Old handle no longer fits newer Alexes, had to modify the old handle.…

Downloads
157
Likes
31
Rating
5
P
PrintablesJustinBridou

Modérateur de son/Sound moderator for Hatsan Flashpup-S 1/2 20 UNF (4.5mm or .177) Impression rapide et économique

Attention, nouveau modèle ! Après 200 tirs avec l'ancien, l'avant du modérateur a cédé sous la pression. Attention new model ! After 200 shots with the old, the front of the moderator has given in under pressure.Attention new model! After…

Downloads
156
Likes
16
Rating
0
P
PrintablesHacksolot

Gridfinity Wire Spool Holder - Economy Version

I cut down some of the bulk to save an hour of print time. I use this for holding the 1lb Kester Solder Roll. OP uses this to hold wire spools. another remix has a thinner rod available that is compatible with this one.

Downloads
141
Likes
19
Rating
5

Feet Anatomy (High Resolution) FOR FREE? IN THIS ECONOMY?

Do you have a foot fetish? Are you an enthusiast of anatomy? Do you enjoy unoptimized meshes? If any of those reasons resonate with you then this is the model for you. A model of the bones in your foot. All the models in this collection…

Downloads
138
Likes
52
Rating
5
P
PrintablesAbílio Costa

Gridfinity Alex drawer tray grid (economic variant)

Since the Alex drawers do not open fully, it is hard to reach the bins on the back of the drawers. This tray allows you to quickly remove bins on the front of the drawer, making it possible to slide the ones on the back to access them!…

Downloads
135
Likes
39
Rating
5

Vintage Conoco Sign 3 Colors

Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order: Start with White, then Red, then Dark Green. Quick Guide to changing filament~ Have some…

Downloads
124
Likes
47
Rating
5
P
PrintablesKasuki Kairen

Llavero Digimon - Emblema del conocimiento / Digimon's Knowledge emblem Keychain

Llavero inspirado en la serie de animación Digimon, con la posibilidad de imprimirlo completo o por partes para hacer cambios de color para esas impresoras 3D mas básicas. Keychain inspired by the Digimon animation series, with the…

Downloads
122
Likes
23
Rating
0

Walther LG400 Economy cheek piece

A simple cheek piece for Walther LG400 economy. The cheek piece is really comfortable. The adapter plate is simple, but it serves its purpose. You will have to print two spacer sleeves. For the 20mm spacer sleeves, you will have to use…

Downloads
113
Likes
1
Rating
0
P
Printables17mortal

Juguete antiestrés con forma de cono espiral

Versión mejorada, movimiento muy suave. ¡Efecto súper relajante, combate tu ansiedad! Para imprimir con éxito este m

Downloads
113
Likes
9
Rating
5
P
PrintablesMundoH3D

ATX Power supply support economic

Model thinking about filament economy and resistance.

Downloads
109
Likes
15
Rating
0
P
PrintablesTilleen

Economical Drawers - with dividers

Remix of the draws to add dividers if you want them, and also the outside dimension is slightly smaller so that the draw will fit into the draw container. Remix of : Economical Drawers https://www.thingiverse.com/thing:1750692 Print…

Downloads
107
Likes
16
Rating
0
P
PrintablesCqeye

"Rolled Star" Economic First Layer Calibration / Additional Use / Walldecoration

Stop printing trash! Re-use your firstlayer calibration! Reduce useless material waste! 🎆 As additional get a beautiful wall decoration 🎇 File: Rolled Star - Layer Calibration → Just one single layer for a “first layer calibration” File:…

Downloads
107
Likes
16
Rating
5
P
PrintablesPetra-Anjali

Economy Watering Can Spout

Sparausgießer Gießkannen 1 – 10 L Mit dem Sparausgießer kann man gezielt aber sanft gießen. Druckhinweise: 0,2 Schicht 15 % Füllung Ca. 1 L 43 min. / 2 L 1 h / 5 L 1h35m / 10 L 1h37min Ca. 1 L 4g/ 2 L 5g / 5 L 8g / 10 L 10g Keine Stützen…

Downloads
104
Likes
9
Rating
5
P
PrintablesNiek

Economical Gridfinity bins with scoop - vase mode

I'm working on a parametric version of this, when that is finished I will link it here. Currently I have uploaded some basic sizes. There are some other lightweight Gridfinity bin designs out there, but they don't have all the features I…

Downloads
97
Likes
24
Rating
5
P
PrintablesKINGDERRI

Conos espirales super divertidos

Son unos conos muy entretenidos y para pasar el rato

Downloads
95
Likes
5
Rating
0
P
PrintablesJoshua-Man

Llama' s Improved Filament Dry Box - Economy grade with bearings and Bowdens

I didn't like the options out there with the spool carriers that spools fall of nor do many have clean ports for Bowden tubes, nor do they work with 3d printed bearings. Most are limited to the size ranges they are compatible with, or are…

Downloads
94
Likes
17
Rating
0
P
PrintablesKobyax

Economical DeWalt Battery Holder

This is a Cheap Dewalt 18V Battery Holder that needs only ~15g of filament!. The batteries can be inserted from both sides and are held in place. I recommend printing it with PETG but PLA will work too! The model was made by me from the…

Downloads
92
Likes
17
Rating
0
P
Printablestsukworks

Ham Radio Control Mount for Ford Econoline Windshield

I made this to mount the control unit of my Yaesu FTM-400XDR to the windshield of my ford E-series van above the mirror. It is meant to angle the head unit about 10° down and 10° towards the driver of LHD vans for an optimal viewing and…

Downloads
92
Likes
23
Rating
0
P
PrintablesAlex

Economical Drawer 112x112mm box no supports needed

This is a drawer I designed for small parts like screws and electrical components for arduino It has various configurations of boxes for your needs ( with 9,6,3,2 and 1 compartments) Needs no supports 112x112x29mm inner box size takes…

Downloads
86
Likes
8
Rating
0
P
PrintablesP-atix

Micro-Machine Econoline Race Truck

Tooned Customized iconic Ford Econoline 1965. Parts are optimized for supportless print.(However, if you have problem with fenders use a support enforcer.) Keep the orientation of the parts as original STL files. Model is bolted together…

Downloads
81
Likes
43
Rating
5
P
PrintablesJMR Design

Cono de tráfico

Cono de señalización.

Downloads
78
Likes
2
Rating
0
P
Printablesjifop

First Gen Econoline Dash Drinks Holder

Dash mounted drinks holder for first generation econolines, takes most small mugs, cans etc. I wouldn't use PLA as this may warp but PETG/ABS/ASA etc would be fine!

Downloads
74
Likes
11
Rating
0
P
PrintablesNandito

Conos para soportes bobinas filamento

Conos para soportes bobinas de filamento Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 3 Infill: 25 Filament: Elegoo Pla verde Notes: Conos para soportes de bobinas de filamento con varias forma de…

Downloads
73
Likes
4
Rating
0
P
Printableskd5jbk

Gridfinity refined base for economical resistor storage tube

Loved the economical resistor storage tubes by John Oldman ( https://www.printables.com/model/650410-economical-resistor-storage-rack )but was sad because it wasn't compatible with my existing gridfinity base. So I knocked up this base…

Downloads
72
Likes
8
Rating
0
P
PrintablesAsraff Amzani

Torque Wrench Economical Case

Nothing's wrong with the original design, it's just that the original case is somewhat costly to reprint just to closely match with the measured torque of the rotor. And that can create unnecessary waste. This model enables you to closely…

Downloads
68
Likes
8
Rating
5

Cono para señalamiento de protección de obra

Modelo de cono para señalamiento de protección de obra con fines decorativos o educativos

Downloads
65
Likes
2
Rating
0

Cuña cono trafico

Tienes corrientes de aire ? Se cierran las puertas bruscamente? Ponle solución con esta divertida cuña señalizada cono.

Downloads
60
Likes
11
Rating
0
P
PrintablesSpencerViridian

Economical Resistor Storage Rack Remix

I really like JohnOldman's resistor tubes, but I needed more capacity in each tube to suit a resistor kit I have. I modified the OpenSCAD file to make some of the dimensions easier to edit and added a debossed label so I wouldn't need to…

Downloads
60
Likes
5
Rating
0
P
PrintablesNatalie T

Ikea Skubb Dividers - super economical, only 10 grams!

I made this to convert my Skubb boxes into cable storage, but it can be used for anything else. I spent a fair amount of time seeing how far I can optimize these dividers to use as little material as possible. The resulting divider uses…

Downloads
57
Likes
17
Rating
4.75
P
Printablestoniviruta

llavero cono de trafico

Progamo un camio de filamento en la capa 34, 128 y 222. relleno al 20% para darle fuerza en la base , al resto del modelo no le afecta.

Downloads
55
Likes
7
Rating
0
P
PrintablesRepoholy

Economical Single Seat Boaty

I guess I wasn't the only one who thought it would be great if the 3D Boaty existed in a "single seat" version that would keep the original proportions. So here it is! It still works as a good test model, is even cuter, economical in…

Downloads
53
Likes
5
Rating
0
P
PrintablesSoontheman

VW T5.2 Conole Plug

Console Plug for VW T5.2 - closed & version for USB-connector

Downloads
52
Likes
4
Rating
0
P
PrintablesRioseras007

Danette Reilly, conocida como Firebrand

Danette Reilly , conocida como Firebrand (o Firebrand II), es un personaje de cómic de DC Comics , perteneciente a la era dorada (Golden Age) y miembro destacado del equipo All-Star Squadron . Origen e Historia Familia : Danette es la…

Downloads
52
Likes
6
Rating
0
P
PrintablesKaeruWay

¡5 Conos de Helado! ¡5 Ice Cream Cone!

Disfruta de este divertido pack de 5 modelos STL de conos de helado . Cada diseño presenta una forma única: desde el clásico de una bola, conos con varias bolas y detalles extra, estilo helado suave en espiral, hasta conos con un toque…

Downloads
51
Likes
5
Rating
0
P
Printablesfan4tix

FalconOne - Quadcopter made in Germany

My latest Quad design. The frame is nearly fully printed. You only need some wooden bars and some screws. I've provided an Assembly Guide with detailed instructions and lots of Images (as we all love lots of images, don't we?) on how to…

Downloads
48
Likes
4
Rating
0
P
Printablesdavemoneysign

8020 5/16" Slide In Economy T-Nut Holder

While assembling an 8020 15 Series assembly in the lab, we noticed that the 5/16" Slide In Economy T-Nuts we were using were not staying in place well. I designed a quick part that could hold the T-Nut in place during assembly. This will…

Downloads
47
Likes
16
Rating
0

CONO DE TRAFICO

Un original cono de tráfico para decoración o escenografías.

Downloads
44
Likes
2
Rating
0
P
PrintablesMiniSumo

MiniSumo Wheel (Economy Gearbox )

These wheels are designed to fit the "economy" or "low cost" plastic gear motors and is aimed at Mini-Sumo and small robots with rubber band tyres. Instructions This wheel was designed on Creo Elements, and printed on a Printrbot Simple…

Downloads
42
Likes
1
Rating
0
P
Printablesretrorecall

Filaments.ca Spool Adapter Ring - Econofil

A spool ring adapter for filaments.ca Econofil filament spools. I printed this on a Bambu P1S and tested with spools I bought from last year.

Downloads
40
Likes
4
Rating
0
P
PrintablesDANAKO65

ice cream cone base. Base cono Helado

ice cream cone base, base cono helado.

Downloads
40
Likes
9
Rating
0
P
PrintablesMartin GALLOUX

savings piggy bank / Tirelire à économies

when it is full, break it to open it !!

Downloads
38
Likes
3
Rating
0
P
PrintablesMadeThisThing

Economical Resistor Storage Box

Printed on an i3 MK3s+ with the 0.2mm SPEED profile, gyroid infill, and auto infill combination. Do not modify the internal width/depth of the box. Instead, configure the tube pocket sizes and spacing, and the overall dimension of the box…

Downloads
36
Likes
3
Rating
0
P
PrintablesReyam

Cono de decoracion

Un cono de decoración para tu hogar.

Downloads
36
Likes
1
Rating
0
P
PrintablesMiguelitocaf

Cono Porta bobinas filamento rodamiento 608ZZ

Cono Porta bobinas filamento rodamiento 608ZZ

Downloads
34
Likes
5
Rating
0
P
PrintablesCubesAndCircles

Stronger and Easier to Print Economic Roller Spool Holder

My printer was catching on the long, tall support in the middle of each side. I added a horizontal bar in the middle of each side to anchor it to the rest of the print and also make it overall stronger.

Downloads
34
Likes
4
Rating
0
P
PrintablesApitzalli

Simple and economic laptop stand

Here is a very very simple laptop stand that requires only 25 grams of filament. It was designed for a Lenovo T490s but it will fit many laptops around 16mm thick and is easy enough to modify in order to fit yours.

Downloads
32
Likes
6
Rating
0
P
Printablesconoa3d

masterpool Conoa3d

pour se modelé je me suis inspiré de la masterpool de Bambulab qui pour moi est géniale. Donc j’ai reproduit cette masterpool e ajoutant des détaille supplémentaire ainsi que mon logo. PARAMÈTRES D’IMPRESSION 3D hauteur de couche en 0,2…

Downloads
31
Likes
0
Rating
0
P
PrintablesShane Battye

MARSUPIAL - An economical microscope slide and lab bench parametric organizer

MARSUPIAL - The Economical Lab Organizer Introduction MARSUPIAL is an economical interlocking storage system for the laboratory and microtomy bench or workspace. Minimal-waste Adaptable Reconfigurable Stackable Universal Parametric…

Downloads
31
Likes
7
Rating
0

Conos para rehabilitación de miembro superior · Grip rehabilitation cones for the upper limb

Categoría: Producto de apoyo Contexto de uso: Ejercicio y rehabilitación Caso de uso: Diseñado para promover la fuerza del miembro superior, el agarre y/o la rehabilitación sensorial mediante diferentes texturas. Notas: Tres tamaños…

Downloads
29
Likes
6
Rating
5
P
PrintablesMiniSumo

70mm Wheel for Economy Gearbox

These wheels are designed to fit the "economy" or "low cost" plastic gear motors and is aimed at Mini-Sumo and small robots with rubber band tyres. This remix is aimed at the #84 bands and is 70mm diameter to give clearance on a battery…

Downloads
28
Likes
1
Rating
0
P
Printableskjbturok

EMOTICONS FOR PHOTOCALL/PARTIES, ETC. / EMOTICONOS PARA PHOTOCALL/FIESTAS, ETC

More models available on my cult3d page https://cults3d.com/es/modelo-3d/variado/emoticons-for-photocall-parties-etc-emoticonos-para-photocall-fiestas-etc I made some "masks" of emoticons for the Photocall of a friend's wedding and they…

Downloads
27
Likes
1
Rating
0
P
PrintablesAlan Pound

Economical Resistor Lids with Lables

Based on the the 'Economical Resistor Storage Tubes' by John Oldman ( https://www.printables.com/model/650410-economical-resistor-storage-rack ) I wanted to have the values built into the lid as I just got a new Snap Maker U1. This set of…

Downloads
26
Likes
2
Rating
5
P
Printablescookiecrook

Seatbelt Buckle Cover from 1990 Ford Econoline camper conversion by Sportsmobile

Replacement for the crumbling 33-year-old plastic cover of an otherwise good belt buckle in my camper van. My van is a 1990 Ford Econoline, but I think this particular belt buckle was an aftermarket part put in by the van conversion…

Downloads
26
Likes
7
Rating
0
P
PrintablesMichaelBecker

Cono de hidroponia 40mm

Cesto para hidroponía para tubo de 40mm, con amplio espacio en la base para mejor desarrollo de las raices. Hydroponics basket for 40mm tube, with ample space at the base for better root development.

Downloads
25
Likes
9
Rating
0
P
Printablesadesir

Etui lame couteau économe

Mes couteaux économes se baladent dans le tiroir avec les autres couteaux… Pour éviter que la lame s'abime et perde son affutage, voici un étui très simple, dans la continuité du manche du couteau. Instructions d'impression Impression…

Downloads
24
Likes
2
Rating
0
P
PrintablesNicroxio

Economical Resistor Storage Rack Gridfinity slot

Is an adaptation of the Economical Resistor Storage Rack (ERSR) to make it compatable with gridifinity This is a single unit wide and 2 units tall. I plan on making appropriate 2x2, 3x3, 4x4 unit versions but I am lazy and this works for…

Downloads
24
Likes
2
Rating
0
P
PrintablesJer

Economical Body for Vertical Spool Stand

I'm printing this with 2 perimeters, 2 bottom and 4 top layers, 10% cubic infill. Cost is 61g. Public domain license. ♡

Downloads
24
Likes
2
Rating
0
P
PrintablesHugo A. Garcia

Broomstick Shirt Rack - A Beginner Circular Economy Project

Disclaimer This is my personal entry for the Contest Theme : Print Tables. If I win the printer then it will be for personal use which will include creating more projects and workshops like the current one for the High Tech Lab. Below in…

Downloads
22
Likes
27
Rating
0
P
PrintablesBrendan Harris

Gridfinity lite - economical plain storage bins open ended

Gridfinity lite - economical plain storage bins from @jake_worrell with the end cut off so you can get longer objects on a standard 256x256 printer. For example mine caps out at 6 and I needed some 7 and 8 length bins for tools and other…

Downloads
21
Likes
6
Rating
0
P
PrintablesMichaelBecker

Cono para hidroponía

Cesto para hidroponía para tubo de 40/50mm, con amplio espacio en la base para mejor desarrollo de las raíces, mas dos ranuras para dos posiciones. Hydroponics basket for 40/50mm pipe, with ample space at the base for better root…

Downloads
20
Likes
4
Rating
0
P
PrintablesPoesia3D

JUEGO ANTIESTRES "AROS Y CONO"

Se trata del famoso juego que consiste en introducir, lanzándolos desde la distancia acordada, los aros en el cono. He dispuesto de 3 aros de cada color por lo que pueden jugar hasta 2 jugadores. El tamaño es adecuado para jugar en una…

Downloads
19
Likes
6
Rating
0
P
PrintablesGabriel León

Segmentos de un cono/Segments of a cone

English: This is an educational project that shows the different cuts that can be made to a cone. The cone segments are separable and are held together by magnets. The size of the hole to put the magnets is: 7mm diameter 2.3mm depth…

Downloads
19
Likes
0
Rating
0
P
Printablesprintandtinker

Token economy - Task rewards for kids - No AMS needed

Tokens that can be used as a token economy with kids. Tokens for tasks. Kids can trade the tokens for things like extra screen time or fun activities. Make up your own rules, but it could be something like: dirty plate in dishwasher after…

Downloads
18
Likes
11
Rating
5
P
Printablespauli

Decoración - Decoration - Conos Hueco con base

Florero / Jarron de decoración en diferentes configuraciones

Downloads
18
Likes
1
Rating
0
P
PrintablesPapyjo

Enceinte confinement économique pour Prusa I3 MK3S (enclosure)

Une enceinte de confinement à bas prix, telle a été ma démarche. Démontable et facile à faire évoluer. Pour avoir un endroit sans courant d'air, et à une température “correcte” j'ai conçu cette boite avec quelques coins imprimés et des…

Downloads
18
Likes
2
Rating
0
P
Printablesatom2ueki

"Click" Belkin economy socket extension wall mount

The model designed with 2 ways fixed slot, you will hear a confirmation "click" sound once it slide to the correct position You can easily detach the power extension with this accessory Printing friendly, the model dedicated designed to…

Downloads
18
Likes
2
Rating
0
P
Printables157kfc23

ford 1961 ford econoline

its a truck that is a Ford 1961 econoline

Downloads
16
Likes
3
Rating
0
P
PrintablesJosé Pedro

Chibi Conor Mcgregor Mma Fighter Figurine 3D Printable

Detailed 3D printable Chibi Conor Mcgregor Mma Fighter figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Downloads
16
Likes
3
Rating
0
P
PrintablesMilan98

Úsporný univerzální box - regál na různé věci - Economical universal box - shelf for various things

Box používám u tiskárny na různé věci: spony na cívky filamentu, magnety, ložiskové kuličky .... Tisk je jednoduchý a bez podpěr. I use the box on my printer for various things: filament spool clips, magnets, ball bearings.... Printing is…

Downloads
15
Likes
1
Rating
0
P
PrintablesHibo.

Economy hook 1g of PLA

35percent infill no supports

Downloads
15
Likes
0
Rating
5
P
PrintablesLautaro Alonso

Porta llaves con iconos

Un sencillo porta llaves con diseño del hogar, una sola pieza para que resulte fácil en la impresión

Downloads
14
Likes
0
Rating
0
P
PrintablesGazz292

Economy Parallel set holder

A holder for the set of Economy Thin Parallel's sold by Arc Eruo trade and others : https://www.arceurotrade.co.uk/Catalogue/Measurement/Parallels-Angle-Blocks-Test-Bars/Economy-Thin-Parallels-Set The holders interlock with other ones i…

Downloads
14
Likes
0
Rating
0

Supports pour penderie économique

Eléments simples imaginés pour créer une penderie à l'aide de basiques manches à balais en bois. Imprimez autant de pièces que nécessaire : deux Numéros 1 pour les bouts et des Numéros 2 si vos tringles sont longues. Coupez le manche à…

Downloads
13
Likes
0
Rating
0
P
Printablesbiscuitless

Econolite 8.5" Traffic Light Stand

This is a stand for an 8.5" Econolite traffic light

Downloads
13
Likes
1
Rating
0