531 models
Magnetized dust collection couplings are not my original idea, but I was tired of searching for a model that fit the many unusually sized dust-ports in my shop, so I made this one parametric. Assembly involves gluing your magnets into the…
The parts can be printed without support with PETG, 0,4mm nozzle, 30% infill and 6 contours are recommended for better stability. For own shaft connections the coupling is attached as *.stl and *dwg file. For non-printable parts, 4 M2x6…
Designed at the request of my college, it's a functional replacement for the original Kuplung. Due to the size and complexity of the model, it's a bit tricky to print. I can share my experience, but you will probably need to find your…
This is a part of a bigger project and mounts on my other model (the gearbox) and should drive a differential gearbox (yet to come). A dual coupling is needed when you want to link 2 rotating shafts, even if they are supposed to be…
I measured this from some connectors I had in use, print solid for strongest results. I have used some cheap PLA to produce these and I've tested the pressure up to 8.5Bar, but YMMV and I take no responsibility for injury caused by using…
Auger safety clutch for meat grinders Zelmer, Bosch, Philips ect. I received another order for the repair of a meat grinder. As usual, the plastic part failed. The sore spots of all meat grinders are gears or clutches. Because they are…
Connecting piece for pool hoses DN32. I used PET-G material with 0.25 layer and 5 perimeters. I recommend full infill or full perimeters.
Odolná hadicová rychlospojka z ¾" na ½" (nebo opačně) s těsněním. Model je tisknut z materiálu PETG s podpěrami a skloněn pod úhlem 45° z důvodu odolnosti tlaku uvnitř rychlospojky. Soubor 3MF obsahuje též malou podpěru pro zvednutí.…
Should be printed în PETG (PLA is too britle). You can buy cheap UM2 collets pack (10 pcs - $2) here https://s.click.aliexpress.com/e/_oBiPN3h Also checkout the model with PC4-M6 Pneumatic Connector…
I have designed decoupling feets for the orignal feets of the Prusa Box. Just stick a few pads underneath and everything is a little quieter and produces less vibrations.
A friend of mine needed new Face Mask Couplings for his Laerdal CPR Doll. So i re-create this piece for Home printing.
Spřáhlo pro modelovou železnici LIMA 0: Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.15mm Infill: 30% Filament: Prusa, DevilDesign... PETG black Category: Toys & Games
My crappy drill pump is supposed to fit standard garden hose thread (GHT), but every stock hose or coupling I've tried slips right off. Thanks to @Nat_ for uploading the F3D model since I was able to import a new thread form (M19 x 2.2 /…
It always bothered me that I couldn't get the last bit of soap out of Method hand soap dispensers apart from rinsing out the bottle and washing it all down the drain - this seemed wasteful and unnecessary. Using this coupling, I can now…
This design is used to increase pressure of PC fans to get air pass through HEPA filters. Based on Noctua fans webpage.
This is a coupler design I prefer over the brass fitting which is meant to bite into the PTFE tubing. Ive found it very hard to get the correct torque such that the tubing isnt squished but that its is solidly connected to the extruder…
Was designed as a copy of original piece. Small but useful device. Printed: PLA (PETG/ASA could be better choice) Infill 15-20% No support needed
Print instructions: Material: PLA Layer: 0,10 Perimeters: 2 Infill: 15 % Supports: No For better adhesion to the hotbed, I recommend using a brim. Also consider using a slower print speed, more details in the attached 3MF file. Part list:…
This is a fence post coupling i created to attach an electrical box and a security camera. Print instructions I added the fusion file so you can change the width if you are using the design for a fencepost with a different thickness.
The Rotrics DexArm / Hexbot robot arm combines with an optional safety enclosure box for laser engraving, with a built-in fan. However, there is no obvious way to attach a pipe or tube to guide the fumes outside. I designed a coupling…
Jednoúčelová spojka pre spojenie pevnej rúry KG160 a flexi hadice D150 , použité pre odsávanie pilín na pojazdovej píle. Na strane flexi hadice je vytvorený jemný závit pre bezpečnejšie kotvenie hadice, preto je potrebné ju natočiť na…
A modified model for a 2kg spool that doesn't hold together. And there are problems with it. There are two lengths. 110mm and 115mm. Usually 115mm fits, but sometimes it is necessary to use the shorter length 110mm. 2 pieces of sticks are…
Hose Couplings for Air ¼'' male fitting threads into bottom use clay, playdough, or rubber gasket around edge contacting boat use thread tape on print between air fitting apply soapy water to boat or welds in question apply printed nozzle…
selection of fittings for garden hose and drip watering hose... 1/2 inch (13-16mm)
Build Mod Hack 5mm to 8mm Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 25mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws: 2 - 3mm x…
This replaces the tube coupling on the back of the K2 Plus to allow connection of the side spool holder and the CFS at the same time. Can also be used with a drybox. Can be used with CFS buffer mounted on the printer or on the CFS.…
spare parts for LGB model train couplings LGB model train spare parts can be quite expensive, especially if you want to build your own waggons and need a lot of them. I redesigned the original coupling mechanism, including a softer and a…
My Gauge 2 Nederlandse Spoorwegen Fccpps wagon required European style coupling hooks. This is my attempt to design them in both 1:32 and 1:22,5. The printed items are screwed together with little M2 bolts for Gauge II. M1.6 bolts are…
Jedná se o zjednodušenou napodobeninu spřáhla ROCO.
This coupling lets you screw two lotion bottles together to empty the last bit of an empty one into a new bottle. Designed and tested with an Aveeno bottle and printed with PLA. 2021-11-12 Update: Uploaded a newer version which is much…
4 inch to 4 inch flexible hose coupling. The ends have a 2 degree taper to allow the hose to slide on easier. The STEP file is included. Dimensions Overall Length: 2.25 inches Overall Width: 4 inches The STEP file is included. Print…
Manufacturing procedure: Material: PETG 3D Printer: FDM 3D printer, average print time 2 – 6 hours, depending on size Slicer settings: 7 perimeters, 0.3mm layer height, print vertically, use brim Post processing instructions: Clean the…
Coupling for hose 16/22 mm and Gardena G1/2 adapter with surface for pliers or wrench. Suitable for connecting a 16/22 mm hose to a Gardena adapter with a G1/2 thread. Printed with Prusament PETG, no supports.
Improved Tapered thread bowden coupling PC4-M6. the threads were too tight and too weak. based on https://www.thingiverse.com/thing:1993384 Print instructions Category: 3D Printer Parts Summary Improved Tapered thread bowden coupling…
While making a drip system for the garden I noticed that I needed a couple more 180° degree joints, and so I thought, why not try to print them and see how they hold. I would not recommend using them for high-pressure applications, in the…
Build Mod Hack 5mm to 8mm Tall Coupler This is intended to fit a 5mm shaft of a stepper motor that has a D shaft and a 8mm lead screw Dimensions: D = 20mm H = 37.5mm Printing: Nozzle 0.4mm Layer 0.2mm Infill 35% Min. Hardware: Screws 3 -…
Please reuse the rubber and nut already attached to the SH02 when installing the replacement .
Parametric coupling (fusion). Prints without supports. You can set diameters, number of teeth, locking power etc. Tried in PETG and PLA. Shown here in a make with some handles to make it easier to twist & lock Edit 2024-10-13: Fixed some…
The plastic spring used nowadays by LGB to push up the coupling hook deteriorates over time. These sagging hooks result in spontaniously unhooking of wagons in your trains. This is my attempt to fix this by using a spring salvaged from a…
This is a fidget toy that may be used with a keyring. It is a model of a Shibata style train coupling used for example on the Shinkansen: https://en.wikipedia.org/wiki/Railway_coupling#Shibata_coupler No supports are needed for printing…
Hose connector end with water diffuser, 3D printed in one piece from PETG filament. Second part is rubber ring seal remove from the original hose coupling or printed from flex filament Parametrically adjustable: number of intermediate…
Adapter kitchen faucet to Gardena coupling I use it myself to attach a hose when cooling my beer brewing. Don't forget a rubber gasket between the adapter and the faucet.
2.5 inch to 2.5 inch flexible hose coupling. The ends have a 2 degree taper to allow the hose to slide on easier. The STEP file is included. Dimensions Overall Length: 2.25 inches Overall Width: 2.5 inches Print Settings Material:…
A simple bowden coupling clip
just part of the hose lock. this is prepared to be used in your project. Is compatible with 1/2" (13mm) fastlocks (Gardena, Fieldman, Hozelock, etc.). For right production you need to use O-ring 11x2.5 mm or print is from Flex Printed…
The model consists of two print files. Print details: -Petg/PLA -0.2 mm -Nozzle: 0,3-0,4 (better 0,3) Additionally required utensils: -2x magnet 2x10 mm -paper clip Assembly: Print the two files. Glue the magnets into the magnet holder.…
Scharfenberg magnetic coupling for model trams and light railways in scale 1:87 (H0) The magnetic coupling can be used for almost all light rail models and many GDR tram models that use Scharfenberg couplings. The printing should be done…
The christmas present for the community! Printed replacement for bowden coupling PC4-M6 or PC4-M10 (compatible with heatsink or another printer part). A little filing with a 4mm drill bit may be necessary on the printed part. IDEA: I…
This is an adapter to put fins on a 0.5 - 1.5 liter soda bottle, as well as to mount a Gardena ¾ " faucet coupler. You have to put a rubber gasket between the bottle and adapter. (Gardena has such in their product line). The Gardena part…
My Vcore 3.1 XY Motor Stepper Mount Mod This mod offers several advantages: Belts are now visible so you can check if they are running properly on the idlers Shoulderbolts for perfect concentricity The pulley runs on a 5mm shaft with ball…
Couples two shafts rigidly by using a double headed collet with threaded nuts tightening both ends. Pretty simple, printed at 0.2mm height in PETg, 0.4mm nozzle, 25% infill. Had to add a 3mm brim on the collet to improve bed adhesion. The…
The part often fails because it is designed to break if the shredder is overloaded to prevent damage to the drive. Printed in PETG with supports.
Coupling for larger wilton icing tips, that could be used with smaller size of tips.
Female and male couplings of the remixed hydroponics tower. Handy to create custom components.
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models in the series in this collection => [Mechanical Mechanism Examples] The…
Update: A configurable version of this coupling is now part of https://www.thingiverse.com/thing:4632898 Drop in replacement for Hornby's wide style X8031 coupling. It's slightly wider at the base due to the hook's hinge mechanism, but…
This 3D is very helpful if your Child want to trail his trailer from i.E. Rolly Toys on his BERG Buddy car. As better the material is as more resistance it will be against breaking... would be even better in PA! But if you want to use…
Coupling for 32mm hose to marimex pool
GoPro 360 coupling Quick attachment and 360 coupling for GoPro atachments. All my GoPro related Things: GoPro Bike and tripod atachment with quick coupling https://www.thingiverse.com/thing:4570589 Phone stand with screw and GoPro…
osVAC (neo) remix to create a 90 degree elbow coupling (M32-F32). Both ends have a slip ring (i.e., can be rotated 360 degrees) and can be connected to a female and male adapter, respectively. Printing worked fine when part was sliced…
Extruder assembly for Prusa MK3S/MMU2S only with path through festo coupling PC4-01. Simplified filament feed and smoother path, the filament entry is part of the extruder motor plate, (no fs cover-mmu2s, no printer-adapter-mmu2s). Ir…
This is a more realistic and functional towbar and trailer coupling for the Landy Mini by 3Dsets.com and the different trailers. The towbar is a remix of RearBumperForTowbar.stl by Matthijs2101 . Unfortunately, this design requires…
A coupling hook I modelled to replace a broken one on an old childhood toy of mine. It was made to fit a car in a Thomas the Tank Engine toy so that the car would hook to the other car and train in the set. Just thought I'd fix it up for…
This aluminum flexible coupling is designed to connect and transmit torque between two shafts, particularly suitable.
UPDATE 10/14/2026: I made some changes to the NPT library, so the relevant files were updated accordingly. ============================================================================ I wrote an SCAD tool for generating pipe threads that…
Merge of a coupling with a 1x2x0.5 duplo brick with a female coupling. Purpose: Make other cars hitchable
Caution, it has sharp edges! You will need: M3 Tap e.g. Right Hand Tap Drill 6 or 8 pcs - M3 hex socket head cap screw How to print: CURA PRUSA (I'm not sure) Print Settings -> Advanced -> Slicing -> XY Size Compensation Infill ~ 50%…
These are my most recent design of Nem Hook and loop couplings. like the other couplers, I've uploaded, you mainly just need a paper clip to act as a pivot for the hook. you should be able to use these couplers with already existing…
This will go times 2 in my RC 4WD design (in progress) but it also drives (partly) of the overall design size. So I decided to streamline a little bit. I was able to design a print in place part (much shorter) but prone to breaking (!) So…
This is a flexible coupling I designed for the Anycubic i3 mega to connect the threaded rods and the z-motors, because I had some issues with z-wobble. I replaced the rigid couplers with these ones, to compensate imperfections of the…
Print-in-Place magnetic Filament Cleaner using an ECAS04 coupling for printing in places with lots of dust. BOM 2x 6x3mm magnet 1x ECAS04 bowden coupling Any questions? @NyxCode#1137 on the Voron Discord
Don't forget a rubber gasket between the adapter and the faucet.
Quick design to connect two female connectors of typical garden hoses. I got best results while standing on one end and printing with supports. If printbed adhesive is not best, then use brim or blue tape for better stick to bed. Print…
Made the original version more 3D printer friendly. Print it with TPU. Any hard plastic will not fit!
I wanted to use famichu's model but with a Bowden fitting. insa- published their own remix for an M10 fitting , but I don't really like the M10 fittings since it allows the Bowden tube to move through the fitting rather than securely…
Simple PET-bottle and water pipe (25 mm) quick coupling. You can join as many PET-bottles as needed and create water collector. Print Print without supports with 3 perimeters. Put thread to the bottom on the plate (look at 3mf file).
First upload, yay! Simple one-piece replacement coupling for a ball chain used in roller blinds (for example older Jysk blinds). Designed for ball diameter of ~4.5mm. The original part had a living hinge which gave up and the part split…
tow coupling for rc motor airplane - glider towing It's a construction for my Bushmaster 84", 2.1m Servo size 29x13mm Carbon fiber rod 55x5mm or M5 screw for reinforcement
Just a simple tool that makes inserting a new O-Ring into an inflator quick coupling much easier. The needed O-Ring size is BS610 (6,75x1,78mm). Pull the coupling ring back as if you would when connecting a BCD and insert the pin with…
This coupling fits for the hand blender Type 4191 from Braun. It may be possible, that it fits for other hand blender's too. Category: Hand Tools
I remixed the design from BeardedSwede to use a PC4-M10 Coupling to convert my Neptune to a reverse bowden setup. I have uploaded a version that can be mounted with the stock shroud or the Hero Me shroud for the stock extruder. Also I…
Magnetic filament coupling with ring magnets to get a easy access to the filament or detach the dry box from the printer. The goal was: keep it simple and easy. 4 mm ptfe tube fits snuck into de hole of the magnet. The petg cap gives you…
Print this hose coupling solid in PLA. Use boiling water to install on to the blower as shown in following video. This is one of the building blocks for the Magnetic IDEX printer. Fabreeko Link: CPAP Fan 10ws7040 & hose by Mellow…
Building Block part to connect two vehicles or parts. rotation possible. loos fitting. easay to connect and disconnect. this is not Duplo or Lego. It is a own design and build and modeled on my own!
Description 4 inch flexible hose magnet coupler. The magnets are overprinted so that they are completely embedded into the coupler. There is a 2 degree taper on the hose insert to allow it to slip on easier. Short Clip of Coupler The STEP…
This is a simple printable spacer to fill in the gap left when you move your stock POM leadscrew nuts onto an Oldham coupling. The spacers fit below the Oldham coupling creating a flush surface. They have a 10mm hole to allow the…
Wheels for building Blocks in combination with coupling machanism. a flat 2x2 Brick Block with male and female coupling on the end sides. So when building cars or vehicles you onlay need this part to make an endless chain of rolling…
Kruhová spojka na hřídel je kompatibilní se stavebnicí Merkur (stejná rozteč otvorů). Motor uchyťte do držáku pomocí svou šroubků se zápustnou hlavou M1,6x5. Přírubu je nutno na osičku natlačit, může být potřeba použít trochu větší sílu.
Print in Petg or ABS. The black rubber O-ring is stock
Roco cars are wonderful but they come with a regular swinging coupler yolk. You can purchase close coupling item 4481 (kurzkupplung artikel 4481) to make the cars close coupling… but good luck ever finding one to buy. Clean the print of…
The drain hose coupling included with our Intex outdoor pool easily detaches when the kids play in the pool whilst draining, thus wearing the threads and making a mess on the deck. This coupling is fed from the inside and sits snug and…
This configurable coupling generator (couplings_parametric.scad) is capable of producing an X8031 (Hornby/Bachmann), X9660 (Dapol/Hornby/Airfix) and Hornby dovetail (hornby's NEM socket socket), with and without hooks. Usually the real…
OpenRC GoKart Coupling Steering Remix Riprogettazione della base del collegamento dello sterzo. +10 mm
Forget straight and tapered threads; we're exploring a new dimension with a thread that wraps around a sphere. Why? Because when complexity is free, innovation knows no bounds!
Designed and printed a Schmidt-coupling just to understand how it works. Watched a video and couldn't figure out how the arms move in relation to the wheels. So I made one. I upscale the arms to 104% in PrusaSlicer for looser fit in the…
This is a replacement coupling between the fan and the internal mechanism of a Venta airwasher / humidifier / luftwäscher. This mechanism turns the ‘wheels’ that evaporate the water. The type nr of the airwasher is LW44, but maybe it will…
This gearbox will transfer power at any angle between 0 and 90 degrees off axis. The mechanism seems to be the only one of its type in the wild. I'm not certain I've named it correctly but they are found inside the pivoting throttle arms…
