Search results: crew

Sort order

15,821 models

P
PrintablesBoogie

Screw measuring tool, M2-M10, 4-120mm

Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…

Downloads
94,129
Likes
29,441
Rating
4.93
P
Printablesfivesixzero

Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm)

UPDATE: 2022/12/14 No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while…

Downloads
33,715
Likes
14,400
Rating
4.96
P
PrintablesLuvem Studio

Screw Lock Carabiner

Carabiner with lock that I created for study For greater strength, increase the number of walls. Normally I use four walls but I recommend using five or more. The use of supports is required in the parts highlighted in the image. WARNING:…

Downloads
29,850
Likes
12,834
Rating
4.85
P
PrintablesMalolo

Malolo's screw-less / snap fit Raspberry Pi 4 Model B Case & Stands

Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…

Downloads
12,754
Likes
2,248
Rating
4.96
P
PrintablesMadaco

[Use M3 screws] Spool holder for Prusa MINI Flexible

Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap screws (M3-15 or M3-16) 8 nuts (M3) Foam rubber sheet with adhesive on one side. Recommended…

Downloads
12,140
Likes
3,946
Rating
4.95
P
PrintablesExlipsis

Flippy Friendly Butterfly Knife Balisong Trainer {NO SCREWS NEEDED!}

BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…

Downloads
5,335
Likes
250
Rating
4.56

🗲 Full-Size Mjolnir 3-piece screw together (Thor's Hammer) 🗲

PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…

Downloads
5,269
Likes
1,647
Rating
4.91
P
PrintablesjonnieZG

2.5" to 3.5" SSD HDD Bay Adapter - Screwless

Universal 2.5" SSD/HDD to 3.5" HDD bay adapter. No screws required Supports side rails Recommended to print in PETG No supports required NOTE: Aligns the 2.5" drive to the center - not suitable for enclosures that have a fixed SATA…

Downloads
4,676
Likes
405
Rating
5
P
PrintablesSneaks

Quickly Measure & Sort M2, M3, M4, & M5 Metric Screws up to 50mm Long

Over the years, I have accumulated boxes of random screws that I was too lazy to sort. Primarily because figuring out the size and length was too tedious and time-consuming. I designed this little tool intending to simplify that sorting…

Downloads
4,396
Likes
913
Rating
4.96
P
Printablesmaxwxyz

Screw Claw for Screwdriver and Bits

Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…

Downloads
4,359
Likes
1,814
Rating
4.86
P
PrintablesRobSmo

Drill and Screw Guide 90 degree

Simple drill and screw guide. Helps to drill perpendicular holes and screws. Tested over with my pergola project. Works fine. Super easy to get 90 degree angle. Scale for smaller objects. This one is designed for long (30cm) drills.…

Downloads
4,066
Likes
2,126
Rating
4.66
P
Printableshashizo

Gravity knife fidget toy extended (no screws)

The original size was a little small for hand holding, so the overall length was extended. Please be careful not to injury. -Update- I have made an update to add a small edge to the shape to allow for better finger hooking. There is no…

Downloads
3,638
Likes
404
Rating
4.75
P
PrintablesPhilippHee

Metric Screw and Nut Measuring Tool

Metric Screw and Nut Measuring Tool This is a remix of the great measuring tool from cmh . Link: https://www.prusaprinters.org/prints/38356 Remix Information I added hexagonal holes on the back to measure the nuts of the corresponding…

Downloads
3,462
Likes
457
Rating
4.96
P
PrintablesMichael

Screw Box / Modular storage system

Yet another remix of MartinMajewski's storage/organizer system ( https://www.thingiverse.com/thing:2780498 ) I needed something for my screws, and nothing I could find was really what I wanted. I made it bigger in all dimensions (sorry…

Downloads
3,150
Likes
644
Rating
4.48
P
PrintablesJirka

Large screwdriver holder with honeycomb pattern

Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…

Downloads
3,040
Likes
878
Rating
4.8
P
PrintablesBen

M2 - M10 Phillips Screws in all sorts of lengths (incl. STEP)

A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…

Downloads
3,029
Likes
1,164
Rating
4.5
P
Printablesmidego

Ikea Skadis Wall Mount / Fixture / Spacer / Screw adapter

Copy/pasted the description from the original author: I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible…

Downloads
3,020
Likes
512
Rating
4.83
P
PrintablesJal Shah

Lead Screw Cleaner

I simply got tired of not being able to clean lead screws properly on my 3D printers without taking them apart for thorough cleaning. I have designed this simple device that uses four 6x3 magnets and isopropyl alcohol-soaked kitchen…

Downloads
2,530
Likes
637
Rating
4.94
P
Printablesclivebradshaw

Metric screw measuring device

This is a great design by Sneaks at https://www.prusaprinters.org/prints/3408-quickly-measure-sort-m2-m3-m4-m5-metric-screws-up- but also to cmh at https://www.thingiverse.com/thing:4154091 for sanitising this for me (version with no…

Downloads
2,347
Likes
347
Rating
4.92
P
PrintablesBen

M2.5 - M10 Countersunk Screws in all sorts of lengths (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of countersunk screws with Phillips drive according to ISO 724 , ranging in sizes from M2.5 to M10, each available in lengths of 10 mm, 16 mm, 20…

Downloads
2,340
Likes
452
Rating
5
P
PrintablesFredslund

Screw Cap Storage Box

Printing Can be printed in any material. Comes in 6 different sizes, all using the same lid. can be scaled down to 55% and still work. The premade G-Code is one lid and one medium bottom. Good Luck and Happy Printing!! Don't forget to…

Downloads
2,277
Likes
317
Rating
5
P
PrintablesPeopleware

Präziser Filament Aufwickler (opt. Akkuschrauber und Motormodul) - Filament winder with opt. cordless screwdriver

Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…

Downloads
2,224
Likes
321
Rating
4.8
P
PrintablesJurriaan

Improved 3D Pull Copter Finger Ring - M3 screw version

Improved version of the 3D Pull Copter Finger Ring with a different rotor design. NOTE: Models not compatible with original design Features: Improved rotor design (bigger and angled differently) Somewhat longer key for easier use Uses M3…

Downloads
2,206
Likes
355
Rating
4.87
P
PrintablesDanDi

CS:GO Butterfly Knife (No Screws Needed)

Hello, I found this on my pc and then remembered I have remix for blade and try to find the maker of the original files but couldn’t find it on thingverse the link from file doesn't work so I am posting it here all. This was the original…

Downloads
2,187
Likes
192
Rating
4.75

🗲 Thor's Hammer Mjolnir 2-piece screw together 60% scale 🗲

Shout out to 80sNerdBomb for the model. The Vertical version is much better . Thread support works well and comes out easily. Images in makes. I printed it in Prusament My Silverness PLA and Mystic Brown PLA.

Downloads
2,182
Likes
403
Rating
5
P
PrintablesJirka

Large massive screwdriver holder / Masivní držák pro šroubováky

Large semi-circular screwdriver holder, honeycomb pattern. Large, sturdy and universal holder for small and medium size screwdrivers. Relatively long but easy to print.

Downloads
2,058
Likes
823
Rating
5
P
Printablesanimatorgeek

Improved Fast-Printing Screw-Top Desiccant Container (v2)

This is a new, improved version of my original vase-mode desiccant container. I changed the side holes to extend inward rather than outward, so the outer surface is much less likely to poke holes in your filament storage bags. Total print…

Downloads
1,966
Likes
464
Rating
4.95
P
PrintablesKilian

IKEA SKÅDIS / SKADIS wall mount screw adapter

I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible solution: with this adapter you can mount the board on…

Downloads
1,864
Likes
414
Rating
5
P
PrintablesHD_Creator

GoPro style thumb screws and handle bar mount

When I realized that commercial GoPro style thumb screws are often much bigger than needed, making the whole camera setup frequently more bulky then necessary, I started to create my own thumb screws of different length. Then last weekend…

Downloads
1,828
Likes
465
Rating
4.92
P
Printableswoelpi

PC4 drybox feeder with knurled screw-on cap (M10&M6)

I wanted an airtight PC4 feedthrough for my drybox, so i took some insperation from the RoboMagus solution and iterated to this solution. The cap is capable of sealing the whole feedthrough airtight, when it is not in use. I also added a…

Downloads
1,823
Likes
353
Rating
4.91
P
Printablesls6

Screw Holder

This is a remix of a model by @LoboCNC . The original screw holder is quite universal: it fits many hand screwdrivers as well as standard hexagonal bits. My problem was that I have some short hexagonal bits that I still wanted to use but…

Downloads
1,812
Likes
479
Rating
5
P
PrintablesWindy

Trapezoidal lead screw Nut tr8x8-4

Trapezoidal lead screw Nut tr8x8-4 for the Trapezoidal lead screw tr8x8 Print instructions Print it slow, optimal height of layers is 0,15. Thinner layers mean smoother movement.

Downloads
1,768
Likes
103
Rating
4.33
P
PrintablesYann Büchau

Honeycomb Storage Wall Screwiverse

I wasn't satisfied with the default Honeycomb Storage Wall inserts; they're press-fits, so the tolerances need to match perfectly. This is a problem when printing with larger nozzles/extrusion widths (which I do frequently for speed) or…

Downloads
1,701
Likes
647
Rating
5
P
PrintablesUko

Prusament Screw-Top Container v2

These are parts that you can use to convert a Prusament spool cardboard core into a container. Insert the top and bottom parts from both sides into a spool core. The "teeth" on the parts align with the teeth on the original spool sides.…

Downloads
1,675
Likes
529
Rating
4.89
P
PrintablesEldenroot

Rapid Screw Measuring Tool - SLIM edition

This is the remix of the Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm) from @fivesixzero. This is a SLIM version - shorter printing time, less weight, slim design… but top quality stays untouched! :) Remixed Things I made few…

Downloads
1,539
Likes
235
Rating
5
P
Printablesshiura

Print-in-place Palm Ratchet Screwdriver Knob

3D printed palm ratchet knob (stubby screw driver handle) Print-in-place : Just print, and you are all set. Assembly work is not necessary. Durable ratchet mechanism : Tapered ratchet gear makes it not only easy to print but also sturdy…

Downloads
1,527
Likes
270
Rating
4.71
P
PrintablesAK3D

Multi-purpose keychain with screwdriver and integrated rule

This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…

Downloads
1,433
Likes
536
Rating
4.67
P
PrintablesSleepyhead

My Screw/Bolt Measure 2 to 10mm including 2.5, 3.5, 4.5.

I am probably mistaken, but most screw measuring/sorting tools seem to be more bolt orientated as missing 3.5mm and 4.5mm in all other models and 2.5mm in most cases. I liked the one by Boogie a little longer than most, leaving space to…

Downloads
1,349
Likes
130
Rating
5
P
Printablesrahix

Honey Comb Screwdriver Holder Screw Mount Improved

A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…

Downloads
1,242
Likes
318
Rating
5
P
Printablesrb

Fully Printed GoPro Thumb Screw

This is a fully printed Thumb Screw and nut suitable for low strain, low stress applications. I had a need for a threaded thumb screw and nut, but hand no metal parts on hand, so merged SubSite's Tripod Screw Nut with Nikolica's m5…

Downloads
1,229
Likes
52
Rating
3.8
P
PrintablesTerence

MMU2S Idler Tension Screw Retainer & Thumbscrew

A solution to eliminate the hide and seek game every time the MMU2S door is flipped. No disassembly or extra components required, reuse existing tension screws and springs, I printed the bases separately in a darker colour and I can…

Downloads
1,219
Likes
228
Rating
4.74
P
Printablespejvl2000

Screws labels for Gridfinity Bin

Screws labels with pictures of DIN912 screws

Downloads
1,198
Likes
440
Rating
5
P
PrintablesN3XT3D

Ground Screw for Automower (Husqvarna, Gardena and Other Brands)

Longer Version (13.04.2026): Upon request, I created a longer version that is better suited for loose soil. Despite its height, this screw can still be printed on the Prusa Mini. As with all models, no supports are required. Please note…

Downloads
1,183
Likes
154
Rating
5
P
Printablesbene

Mechanical Clock Escapement with Balance-Wheel (M3 screw version)

Since I saw a mechanical watch for the first time I wondered: How do they work? Why does it tick and why is it ticking with a constant frequency? And why is there this thing, which keeps tilting from one side to the other? To answer my…

Downloads
1,040
Likes
166
Rating
4.18
P
PrintablesSneaks

Compact M3 Tool - Quickly Measure Prusa M3 Screw Lengths

I absolutely love that Josef Prusa includes spare hardware with his products. To date, I have built 3x Prusa MK3 printers, 3x MMU2 units, and then upgraded them all to 'S' which has left me with a ton of various M3 screws. I recently…

Downloads
1,007
Likes
225
Rating
4.95
P
PrintablesMarin

Thumb Screw Knob

Every time when I need some thumb screw, I'm missing some of its dimmensions in my collection. It is quite annoying. The easiest way to have a thumb screw is to make your own i.e. DIY by using ordinary hexagonal socket screws of type…

Downloads
969
Likes
106
Rating
4.67
P
PrintablesDane Doghouse

Gridfinity Screw and Nut Measurement Tool

The Gridfinity Screw and Nut Measurement Tool is a must-have for any DIY enthusiast. This compact and durable tool is designed to accurately measure the size of screws and nuts, ensuring a perfect fit every time. With its easy-to-use…

Downloads
960
Likes
211
Rating
5
P
PrintablesAvdieking3D

Bag Clip with Screw Cap

I printed it at 0.2mm layer height and a 0.6mm nozzle with pla

Downloads
929
Likes
189
Rating
4.57
P
PrintablesPaKr82

Extruder Idler MMU2S Adjustable With Screw

I had many issues/errors/problems with my mk3s+ mmu2s while printing multi color. I can tighten idler screew to not have stopped filament, but than I had issues to work IR sensor right. I loose scree, IR sesor was working right, but…

Downloads
922
Likes
138
Rating
4.83
P

Gravity Broom Holder with Vertical Screw Holes

Decided to remix my remix and make the original gravity broom holder but with through-holes for screws vertically aligned to anchor into a wood wall stud (or whatever vertically aligned anchoring medium you want!) Made the countersinks…

Downloads
896
Likes
80
Rating
5
P
Printableshellgy

Devil horns for your hat, now with screws !

Print with supports but only on the tip of the horn (if you don't block the supports around the hole for the screw, it won't be easy to remove) PLA is fine 15% infill 100% size 0.2mm use M3 screws (max 20mm long) with assorted bolts If…

Downloads
880
Likes
131
Rating
5
P
PrintablesMordiev

MMU2s Tension Screw Retention Washer

Every time I loosen up the two Idler tension screws and open the MMU2s one or both of the screws and their springs would fall out. They would bounce around and play a mean game of hide and seek. So I made these little guys. Literally the…

Downloads
854
Likes
79
Rating
4.78
P
PrintablesBodo

IKEA drawer support bracket repair - screw-type

What is it? Printed part to connect the particleboard floor of a drawer to its chipboard backpanel. Tested with a repair and enhancement on my 2012 IKEA MALM chest's drawers. Might work for others with the same design too. Why use it?…

Downloads
845
Likes
122
Rating
4.95
P
PrintablesA3B

Prusa MMU2S thumbscrews for idler tensioning

This is a remix of the MMU2 thumbscrews for the MMU2 S . The longer thumbscrew should avoid accidentially pushing buttons on the MMU2S. If you already printed the short/original, you just have to replace the left thumbscrew, because there…

Downloads
841
Likes
130
Rating
4.97
P
Printableskaje

Pegboard Screwdriver Holder - Modular Screw and Rail

This is a new approach (for me at least) to pegboard holders : pegboard screws. They are intended to be used with a “rail” for use on pegboard with hole spacing of either 25mm or 1 inch. These particular holders replace the screwdriver…

Downloads
790
Likes
131
Rating
5
P
PrintablesDino

Small-Parts organizer box (Electronics, screws etc.)

Build instructions You can either slice it yourself or used gcode that I uploaded. Have in mind that every printer is different hence has different optimal print settings. Printing labels I uploaded a DWG file with properly sized labels…

Downloads
761
Likes
106
Rating
5
P
PrintablesLudo B

Bootschroef met 5 bladen, boat screw with 5 blades, Hélice de barco, hélice de bateau

Wegen het succes van mijn bootschroef met drie bladen heb ik er ook 1tje gemaakt met 5 bladen. Voor iedereen kan kan ik meerde of minder schroef bladen maken. Due to the success of my boat propeller with three blades, I also made one with…

Downloads
736
Likes
48
Rating
5
P
PrintablesWOWA IIID

MK4 Z-Cover halfcut - protect the Z-Axis/Screw/Motor

A must-have for the MK4! The trough of the Z-spindle is protected from falling filament pieces, and thanks to the two halves, it's also easy to install. Absolutely essential for every MK4 owner! With this ingenious accessory, the trough…

Downloads
716
Likes
136
Rating
5
P
PrintablesJH3D

LTT "Quick Bits" Case & Stand for Linus Tech Tips Screwdriver Bits

I designed a case to hold every (currently) available screwdriver bit from lttstore.com (with the exception of the bits you store in the regular-sized screwdriver). This case holds 60 20mm bits, AKA the five additional bit sets you can…

Downloads
706
Likes
193
Rating
4.69
P
PrintablesMartin Rigatoni

Mini Screwdriver Keychain

This mini screwdriver has an inner compartment for you to store the bit - or to have a second bit, in case you decide to leave one always on. Carry it with your keys or just leave it in your bag, it's always handy to have a screwdriver at…

Downloads
666
Likes
178
Rating
5
P
Printablespaul020559

Sanding Block - No Screws - MODIFIED

Sanding Block - No Screws MODIFIED VERSION PETG, PLA, etc Layer height 0.3mm 3mf (and gcode) file pre-scaled 60% infill (doesn't really matter) No skirt or brim 25mm wide, about 33mm high and roughly 82.5mm long. Cut the sandpaper to…

Downloads
634
Likes
88
Rating
4.79
P
PrintablesAztec

Short & compact screw measuring tool M2-M12

Thought the versions that existed were lacking by either being too big to keep in a tool belt or didn't have common screw sizes over M5. Also made a version with common pneumatic couplings that are commonly used in my industry. Printed…

Downloads
634
Likes
63
Rating
4.88
P
PrintablesVisualReversal

Dual Screw Mounting Brackets for Govee Permanent Outdoor Lights - Model H705

Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…

Downloads
614
Likes
48
Rating
5
P
PrintablesRylie Pavlik

90 Degree Right-Angle Bracket for household repairs (#6 screws, customizable)

While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in…

Downloads
613
Likes
67
Rating
5
P
PrintablesBoogie

Doorknob/butterfly nut for M5 screw

Doorknob/butterfly nut for m5 screw Just put a m5 nut inside

Downloads
604
Likes
53
Rating
5
P
PrintablesRoman

Corner bracket for M4, M6, M8 screws

Corner Bracket, designed for M4 / M6 / M8 Screws. Enjoy. Layer height 0,15 Infill 20% Perimeters 2 Standard noozle 0,4mm Material PLA or PETG Supports No

Downloads
565
Likes
221
Rating
5
P

Rigid Bit Holder LTT Screwdriver (60 bits, parametric)

This is a remix of figterk 's model to be able to use any rigid filament for those who don't have any flexible ones. I used the Gridfinity compatible model from DSwanlund for the dimensions. The bit holder fits right into the case, but…

Downloads
558
Likes
68
Rating
5
P
PrintablesM2PK

Single Screw Sawtooth Hook (saw tooth wall frame hanger)

Recommended printing settings (or download gcode): Infill: 80%+ Brim = enabled Supports = Everywhere Orientation: see image This 3D-printed sawtooth frame hook is designed to provide a secure and stylish way to hang your artwork using…

Downloads
550
Likes
100
Rating
5
P
PrintablesMilan

Steel Nail and Torx Screw Refrigerator Magnet

Don't like your groceries list being obscured by huge refrigerator magnets that are to flat to grab them. Maybe give this quick, one coloured print a try and finally get rid of those last 40 cm of your old Prusament Galaxy Silver spool!…

Downloads
547
Likes
302
Rating
5
P
PrintablesJKM

M3 screw washer - furniture repair

Creating a spacer for an M3 screw Spacer for large screw hole Easy and fast printing Printing: Material: PETG Supports: no Orientation: can be printed from both sides

Downloads
518
Likes
12
Rating
5
P
PrintablesKVEL

WERA electronics screwdriver holder

Simple holder for Wera electronic screwdrivers.

Downloads
517
Likes
79
Rating
5
P
Printables.STL

Vertical Universal Gun Rack- 2 parts, 3 Screws. 100% effective.

Universal Gun Rack Idea made for any size, length, shape, also editable for any needs. Can be mounted in any way, shape, or size. editable and customizable complete vertical storage racks. Uses 2 normal #6 drywall screws for the bottom…

Downloads
516
Likes
65
Rating
5
P
PrintablesLudo B

Bootschroef met 4 bladen, boat screw with 4 blades,

Wegen het succes van mijn bootschroef met drie bladen heb ik er ook 1tje gemaakt met 4 bladen. Due to the success of my boat propeller with three blades, I also made one with 4 blades.

Downloads
508
Likes
30
Rating
0
P
Printables3Dn00b

5/8 Microphone screw with 8mm HEX

no remix, but I think it is easier to find that way. I didn't have a 5/8" screw and didn't know where to get one. If my screw is to long just scale up the ring.

Downloads
493
Likes
35
Rating
5
P
PrintablesJosh Canfield

Screw driver holder (all-in-one)

Remixed from the original "screw holder" to include the insert hex so you don't need an insert. I don't have any screw drivers heavy enough to pull this out of the wall so I figured I'd print it as an all-in-one.

Downloads
491
Likes
60
Rating
4.81
P
PrintablesRomain

Küpper Workbench screw driver holder

Hi, This print is comptible with the Küpper workbench and can hold up to 6 screw drivers. It is personalized to my need, but should remain fairly standard for normal other set of screw drivers. You can leave a comments, I am always open…

Downloads
485
Likes
45
Rating
5
P
PrintablesKimframes

Silica gel container with screw cap

Silica gel container with screw cap. Height 55mm, width 53mm. 13 Jan 2021 update added model with smaller holes to better support silica gel brands with uneven pellet sizes

Downloads
473
Likes
58
Rating
5
P
PrintablesESPBoards

Rotary Encoder KY-040 (EC11) Housing with Snap-fit and Screw Mount

Simple housing case with Snap-fit for KY-040 or similar Rotary Encoder. It has a hole in a cover for easy mounting under a desk or anywhere else with a screw. Easy access to the 5-pin DuPont connector. KY-040 Rotary Encoder Module Spacing…

Downloads
473
Likes
37
Rating
4.5
P
PrintablesFokieH

Schraubgriff / Screwhandle -- M3 - M12

Antrieb für 6-Kant Schraube oder Mutter um diese Werkzeuglos betätigen zu können. Hierzu einfach die Schraube bzw. die Mutter in den 6-Kant eindrücken und dann verwenden. Hier ist ein ganzer Satz verfügbar (M3, M4, M5, M6, M8, M10 und…

Downloads
470
Likes
113
Rating
5
P
Printablesquiet

M10 screw for (Un)original Prusa Drybox

M10 screw designed for (Un)original Prusa Drybox for F beam in standalone version. The screws were aligned with the holes in the F beam. They prevent air circulation when the standalone version is not used. Print settings: Recomended PETG…

Downloads
465
Likes
57
Rating
5
P
Printablesneoyarus

Bag Clip with Integrated Screw Cap

This is my take on the idea of a bag clip with a screw lid. The main benefit is that you don't need to take it off to get something out of the bag. Why do you want my version? You don't need a third hand to put this on since the middle…

Downloads
460
Likes
107
Rating
4.25
P
PrintablesBen

M2 - M12 Headless Slotted Screws in various lengths (incl. STEP)

A collection of Headless Slotted screws according to ISO 724 , ranging in sizes from M2 to M12, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75 mm, 80…

Downloads
438
Likes
128
Rating
0
P
PrintablesMatthewGTaylor

Screwie - a handy bit driver from an old Sharpie Marker

Bring a used-up Sharpie marker back to life as a handy bit driver. Two different model files - one for typical ¼" bits, a second for 4mm electronics bits. Bit is held securely by a 6mm diameter by 3mm thick neodymium magnet printed in…

Downloads
389
Likes
301
Rating
5
P
PrintablesBen

M3 - M16 Headless Torx Screws in various lengths (incl. STEP)

⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Headless Torx screws according to ISO 724 , ranging in sizes from M3 to M16, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25…

Downloads
384
Likes
102
Rating
5
P
Printablespedrolamas

Raspberry Pi Zero 2 W screwless slimest case

Just a really slim screwless case for the Raspberry Pi Zero 2 W

Downloads
374
Likes
40
Rating
5
P
PrintablesART TOO

SCREW EYE HOOK DRILL BIT - EYE HOOK BIT - (Tested)

Perfect for screws op to 5mm Let me know if you want any adjustments !!

Downloads
367
Likes
181
Rating
0
P
PrintablesBe Me

Customizable Wall Mount for Mobile Hotspot / Wifi Access Point / Router (screws or glue pads, TP-Link, Huawei, Alcatel..)

This is a screwable or gluable wall mount for mobile LTE / 5G wifi hotspots / access points with an additional slot for the battery. Features: charging slot in the middle on the bottom display is visible (turn device around if you don't…

Downloads
363
Likes
29
Rating
5
P
PrintablesMykashy

Metric Screw Measuring Tool M6-M27 up to 120mm

Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure screws of length from 5mm to 120mm. Color change for the letters & numbers If you dont want to paint the letters you can add a color…

Downloads
356
Likes
141
Rating
5
P
PrintablesTreba Ales

Screw organizer / small repair mat

A simple way to organize your screws or parts while repairing.

Downloads
319
Likes
67
Rating
5
P
PrintablesKalov Design

Knurled knobs for M3 to M6 DIN 933 hex screws

This is a collection of knobs for M3 to M6 DIN 933 hex screws. In each dimension there are 2 different knurled designs to choose. The knob dimensions are described in the table on the picture 2. To calculate the visible thread, you must…

Downloads
317
Likes
73
Rating
0
P
PrintablesAdam Kimmerly

Elecraft KH1 Mini Screwdriver Loading Coil

BACKGROUND: The Elecraft KH1 blew up the portable HF radio operating scene when it was released. It covers 5 bands from 40 - 15 m and has an internal ATU and battery. It's actually designed for hand-held use. But with the standard whip…

Downloads
295
Likes
47
Rating
5
P
PrintablesChris White

WERA electronics screwdriver holder for Bott Perfo

Remix of KVEL's WERA Screwdriver Holder with improved Bott Perfo Brackets. Print instructions Additional parts required: - 6 x M3 Brass Heat Set Inserts (for Bott Brackets) 1 x M3x8 Socket Cap Hex Machine Screw 2 x M3x10 Socket Cap Hex…

Downloads
291
Likes
19
Rating
0
P
PrintablesNieuniknione

Metric length measurement of bolts and screws

PLEASE SEE MY OTHER PROJECTS! :) https://www.printables.com/pl/social/236468-nieuniknione/models & Collection: EROTICA :) https://www.printables.com/pl/social/236468-nieuniknione/collections/194978

Downloads
276
Likes
27
Rating
5
P
PrintablesGFS

EDC Micro Screwdriver - Keychain for Hex Shank

EDC Micro Series. Compatible with each other. See also: EDC Micro Knife - Keychain (Scalpel) EDC Micro Pill Capsule - Keychain EDC Micro Tools I EDC Micro Tools II EDC Series Box Continuation of the series. EDC Micro. The same capsule or…

Downloads
265
Likes
80
Rating
5
P
PrintablesCoMet

Silica Screw Container

Model uses layer specific setting of prusa slicer, prints sequential. Thanks to animatorgeek for his fine model.

Downloads
260
Likes
32
Rating
5
P
PrintablesAustin Vojta

Yet Another Fidget Infinity Cube: Screw Version

Buy a printed cube from me directly: AustinMakes.etsy.com This variant of my Yet Another Fidget Infinity Cube v2 model is the easiest yet to print. Assembles using M3 flat head screws. (If there's demand for it, I can upload a version for…

Downloads
258
Likes
75
Rating
4.75
P
Printablestom

Werkzeugablage/ Tool tray for Feedback Sports Ultralight - keine Schrauben nötig/ no screws necessary

Nie wieder das Werkzeug suchen, wenn man an seinem Fahrrad schraubt. Diese Werkzeugablage für den Montageständer Feedback Sports Ultralight bietet Platz für die üblichen Werkzeuge und besitzt 3 Ablagefächer für Schrauben und andere…

Downloads
244
Likes
23
Rating
5
P
PrintablesStampBoutique

52mm lens cap with flaps for easy screw and unscrew

52mm lens cap with flaps for easy screw and unscrew

Downloads
240
Likes
11
Rating
4.75
P
Printableskennyd1gital

Radius Gauge 1-20mm (M5 Socket Head Cap Screw and MMU)

Remixed Radius Gauge 1-20mm , modified to accommodate M5x30mm socket head cap screws and MMU printing. I call my print the “Prusa Edition.” 😜 Print settings are the same as the original, PETG, 0.4mm nozzle, and 0.15mm layer height; with…

Downloads
233
Likes
44
Rating
4.67
P
PrintablesRadim Bažant

Box pro šroubky /Box for screws

Boxy pro šroubky, matičky a další spojovací materiál do dílny i s držáky na zeď. Boxes for screws, nuts and other fasteners for the workshop and with wall holders.

Downloads
228
Likes
55
Rating
0