Search results: crimper

Sort order

132 models

P
Printableseds_3d_shop

Eds French Cleat/wallmount Pliers and Crimper Holder/Organizer (for 10, 12 ,15, 16mm tubes and 15, 18mm FC bars, inkl .STEP)!

UPDATE 07.05.2023: After several requests i added the versions for the most common tube sizes (10, 12 ,15, 16mm) and for 18mm french cleat bar. :-) A French cleat holder for the (crimper)pliers! Inspired by a model by Mikhail on…

Downloads
1,057
Likes
129
Rating
4.8
P
Printablesmorp

Ikea Skadis Ratcheting Pliers/Crimpers holder

This is a rework of some similar models on here to be easier to print and more universally fit larger and different branded ratcheting pliers. Has a recess for the ratcheting latch and a lip on the front to keep pliers in place. Tested…

Downloads
771
Likes
137
Rating
4.97
P
PrintablesMikhail

French Cleat Crimper Holder

Simple holder that allows easy storage of crimpers, pliers, and other similar tools. Print as many as you need and combine with 3/8" wood dowels. Included step file if you need to adjust the holes or cleat size.

Downloads
713
Likes
193
Rating
5
P
Printablesforsaken_candy

Multiboard/HSW crimper mount

Crimper holder for Honeycomb Storage Wall and Multiboard. Should work with IWISS SN-28B, SN-48B, or similar crimpers. I wanted a mount that held the crimper while open, to avoid having to close it every time. Settings Print upright…

Downloads
618
Likes
94
Rating
4.73
P
PrintablesPeterthinks

Mini Dupont crimper

This is for those tiny crimp on dupont connectors that fit inside the plugs that plug into the RAMPS board. Tolerances on this are TIGHT! don't feel bad if you can't print a working one. This isn't going to crush the connector tight but…

Downloads
601
Likes
79
Rating
4.25
P
PrintablesMiguel Camba

Gridfinity wire stripper/crimper/cutter tool holder

A 5x3 gridfinity tray (3 units deep) extruded to fit a very popular wire stripper / crimper / cutter model sold under many different brands with minimal variations. This model, and other very very similar ones, are sold under several…

Downloads
592
Likes
100
Rating
4.33
P
PrintablesDąbal

12 Ga shotshell Roll Crimper

We have the option either use 2 mm steel pins, which need to be hammered in, or ream the holes to 2.5 mm and screw in M3. If you want a nicer finish you can remove the thread from the screws 6 x M3 8 mm can be longer at most they will…

Downloads
554
Likes
38
Rating
5
P
Printablesmikeneron

Gridfinity Network Cable Crimper Holder

Holder for the Klein Ratcheting Cable Crimper (pass-thru) / Stripper / Cutter. Model is VDV226-110. This works with the Gridfinity system.

Downloads
515
Likes
109
Rating
4.86
P
PrintablesMorbier

Gridfinity for HSC8 6-4A crimper plier Kit

This set of two gridfinity is perfect to store you crimping tool kit. The first bin is for the HSC8 plier. It's 3x5x4U The second bin is to store the ferrules, it's 3x5x5U. See my other gridfinity bins at…

Downloads
504
Likes
266
Rating
5
P
PrintablesIguanahotsauce

SN-48B Crimper Holder HSW

Holder for a SN-48B crimper tool that works with the honeycomb storage wall

Downloads
495
Likes
61
Rating
5
P
PrintablesBeamsjr

Gridfinity Crimper Stand

Stand for your crimper tools.

Downloads
485
Likes
99
Rating
4
P
PrintablesPeteD

Honeycomb Storage Crimper Plier Rack

This is a rack to hold connection crimpers and their dies. Note that the left-most slot is narrower for simple, die-less, crimper (or wire striper). Print using PLA and tree support. Arrange on bed with the top side of the rack to the bed.

Downloads
346
Likes
54
Rating
4.75
P
PrintablesPeterthinks

Dupont Crimper Guillotine

Like my mini crimper but takes advantage of the way 3D printers print in layers to make a much stronger crimper. This should help you crimp those small Dupont crimps so common in our hobby. The Guillotine style allows you to use one hand…

Downloads
315
Likes
44
Rating
2
P
PrintablesReitangle

Ferrule Crimper holder for IKEA SKADIS / UPPSPEL

Ferrule crimping plier holder for IKEA SKADIS or UPPSPEL pegboards. I think it will fit and hold most generic no-brand ferrule crimpers. I printed in Black PLA with 35% infill on a Bambu P1S, (tree) supports on, came out plenty strong.…

Downloads
299
Likes
40
Rating
5
P
PrintablesIguanahotsauce

IWS-3220M Crimper Holder HSW

Holder for a IWS-3220M crimper tool that works with the honeycomb storage wall

Downloads
285
Likes
56
Rating
4.5
P
PrintablesJun pepper

Simple paper crimper

Ive seen these paper crimpers around for $8-$10. I figured I could create one, so I did. Just a fun little crafting tool. I used screws left over from an ender 3. I believe they were m3 not sure how long they were. I then heated up a nut…

Downloads
261
Likes
27
Rating
0
P
PrintablesPrinto Matic

Paper Crimper (50mm Tall)

Elevate your crafting with our 3D printed paper crimper, expertly designed for both functionality and aesthetics. Standing at 50mm tall, this tool is crafted from durable ABS plastic, ensuring longevity and resilience during repeated use.…

Downloads
256
Likes
48
Rating
3.5
P
Printablesmilspecmoehring

20mm Vial Crimper

Crimper for 20mm Vials Reccommended Settings: 0.1mm Layer Height 5+ Perimeters If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…

Downloads
255
Likes
20
Rating
0
P
PrintablesRapalax

HSW Ferrule Crimper holder

Pretty self-explanatory - Mine is the HSC8 6-4A budget special, but seems to work for many others. Originally taken from https://www.thingiverse.com/thing:5535836 and adapted for HSW.

Downloads
251
Likes
37
Rating
4.83
P
PrintablesInhibit

Deep Crimper Pegboard Holder - 25mm Deep 50mm Wide

This pegboard crimper holder is deep enough for the thicker crimpers used on Dupont connectors and some models with interchangeable crimping bits. In addition to those types of crimp tools it's useful for attaching a variety of RJ45 Cat5…

Downloads
201
Likes
26
Rating
4.25
P
PrintablesBeche Estudio

Hsw storage crimper rack

Took inspiration by @PeteD crimper rack and modified it a bit to be able to print it on my Sovol Zero bed (150mm). Printed it in PETG I had lying around but any material should do. Print config: -3 walls, 3 top/bottom -0% infill The…

Downloads
175
Likes
22
Rating
5
P
Printablessamywamy10

Gridfinity RJ45 Crimper and Wire Stripper holder 5x2

A Gridfinity 5x2 holder for an RJ45 crimper and a wire stripper. Wanted to be able to store these in my drawer without taking up much height. My RJ45 crimper default position is open, so to put it in I need to close it, which the…

Downloads
169
Likes
44
Rating
0
P
Printablessphink

Gridfinity 2x5x4 holder for network crimper plier (rj45/rj11)

Gridfinity holder for network crimper plier, made for a crimper with 19cm length, 6cm width at handle. 2x5x4 no magnets.

Downloads
169
Likes
29
Rating
5
P
PrintablesTimATX

Ferrule and Crimper case

I increased the height and added a bin to hold my crimper. I also tweaked the lid height a bit. Great simple box to house a tool that sees rare usage.

Downloads
167
Likes
49
Rating
5
P
PrintablesTheOneAndOnly

Ferrule Crimper Gridfinity Tray

I modified this so my icrimp crimpers handle would fit. It should be a bit wider than the original.

Downloads
162
Likes
37
Rating
5
P
Printableschakkuchan

Gridfinity Sopoby Ferrule Crimper Kit

Bought a kit off amazon and wanted a custom setup, used a 5x5 square and made two 5x2.5 sections. https://www.amazon.com/gp/product/B07PJK2VNT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Made one version to hold this speedloader…

Downloads
154
Likes
23
Rating
0
P
PrintablesShabubu

Dupont and JST Crimper Multiboard Holder

Simple way to hang your dupont crimping tool. Should work with most as long as you hang the tool upside down. Feel free to tinker: https://www.tinkercad.com/things/f3ktpdrg2DT-dupont-crimping-tool-multiboard-holder Print instructions…

Downloads
144
Likes
20
Rating
5
P
Printablesmrsam92

LY-03B Crimper Holder HSW

Holder for a LY-03B crimper tool that works with the honeycomb storage wall

Downloads
136
Likes
14
Rating
0
P
Printablesmilspecmoehring

20mm Vial Crimper Keychain Edition

Crimper for 20mm Vials with Attachment Hole Reccommended Settings: 0.1mm Layer Height 5+ Perimeters Recommended Print Orientation as shown If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly…

Downloads
130
Likes
25
Rating
5
P
Printablesmikeeg

Irrigation tube crimper

"Crimper" to fold 1/2" poly irrigation tubing to seal the end. Prints in 22 minutes! 3 g of filament at 30% infill, 4walls. Print with PETG for good outdoor quality.

Downloads
130
Likes
28
Rating
4.5
P
PrintablesNightLonk

Gridfinity: Klein 34056 Hex Ferrule Crimper

Here's a Gridfinity 2x5 holder for the Klein Tools 34056 Hex Ferrule Crimper. I've also included a 2x5 5 bin Gridfinity for either standalone use or for use with the 5x4 Gridfinity Storage Box by Pred (…

Downloads
125
Likes
62
Rating
5
P
PrintablesBpendragon

Micromatch IDC crimper Adapter

I wanted to make a quick disconnect cable for my MK4 in the original enclosure, but since the ribbon cable comes pre-split from Prusa making my own seemed like a good idea with some more standard IDC connectors at the midpoint. Micromatch…

Downloads
119
Likes
9
Rating
4.5
P
PrintablesBob Hayes

Storage Tray for IWISS Ferrule Crimper

I made this to help organize my tool drawers. Fusion 360 file included. Printed in PLA with 0.4 nozzle, 0.2 layer height, and 15% infill. IWISS is a registered trademark of Iwiss Tools Co.,Ltd., which does not support or endorse this model.

Downloads
116
Likes
21
Rating
0
P
PrintablesRan Lottem

HSW Wire Crimper Holder

The original model is used for the other tools, only the yellow dupont crimper is using this remix

Downloads
108
Likes
12
Rating
0
P
Printablesxander.snyder

IWS-3220M Crimper - Multiboard mount

@Iguanahotsauce made a awesomely simple mount for the Iwiss IWS-3220M crimper for the Honeycomb Storage Wall (HSW), unfortunately I went with Multiboard over HSW. So I removed the HSW mount and added a Multiboard push fit mount, this does…

Downloads
107
Likes
22
Rating
5
P
PrintablesLmasek

Crimper Die/jaws Case Proskit

Crimper Die/jaws Case Proskit to compleat a case you will need 2 x M3 24-25mm nut.

Downloads
100
Likes
21
Rating
5
P
Printablestechnojunkie

Gridfinity tray for AFM8 crimper and dies

A tray for a Daniels Manufacturing AFM8 crimper and a few dies. I modeled it for an M22520/2-01 tool, but it will probably work for other tools with similar sized frame.

Downloads
99
Likes
8
Rating
0
P
PrintablesAxum

Aglet Crimper

A basic aglet crimper for aglets about 5mm in diameter. For best results, print with the crimping tools standing vertically as featured.

Downloads
98
Likes
12
Rating
5
P
PrintablesInhibit

Pegboard Stripper Crimper Holder

What you have here is a Pegboard Wire Stripper holder perfect for the little crimper/strippers that come bundled with crimp-on wire ends. See the picture for exact type. Customized version of http://www.thingiverse.com/thing:537516…

Downloads
92
Likes
9
Rating
0
P
PrintablesPoopyPops
Downloads
84
Likes
11
Rating
0
P
PrintablesGreg Zapf

Crimper Die Case (print in place, easier latches)

My printer lacks the ideal tolerances for printing the original file ( https://www.thingiverse.com/thing:1544407 ) with moving latches... after printing and breaking a couple, I realized I could narrow the latches with very little effort.…

Downloads
84
Likes
19
Rating
5
P
Printablesrhinodavid

IWISS Crimpers SN-2549 Gridfinity Case

Created with the Fusion Gridfinity Generator plugin.

Downloads
83
Likes
19
Rating
0
P
Printablesdoragasu

Stackable Gridfinity Holder for "ZoeRax" RJ45/RJ11 Cable Crimper

The crimper can be purchased on Aliexpress: https://aliexpress.com/item/1005006474712295.html The model has a hole for the crimping tool, and another small hole for the spare blades.

Downloads
82
Likes
17
Rating
4

Gridfinity Titan Ratcheting Wire Crimper Tool holder

6x3 gridfinity wire crimper holder for the Titan 11477 ratcheting wire crimper

Downloads
82
Likes
10
Rating
0
P
PrintablesParadox

Wire crimper Skadis wallmount holder

Simple holder for mounting various wire crimpers on a skadis board. I'm currently using it to hold up a pair of Klein ratcheting crimps, a pair of no-name ferrule crimps, an iwiss deutsch connector crimp, and more This project makes use…

Downloads
81
Likes
12
Rating
5
P
PrintablesPaul

Crimper Holder - Skadis

Skadis mount for ferrule crimper and either a JST crimper or flush cutter Print upright with supports for the back mounting pegs.

Downloads
80
Likes
16
Rating
0
P
Printablesbenwittbrodt

Stent Crimper

This is a stent crimper for initial setup of stents intended for insertion into the human body. Category: Hand Tools

Downloads
79
Likes
3
Rating
0

IKEA Skadis IWISS crimper holder

This is IWISS IWS-2820M crimper holder for IKEA Skadis pegboard. This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis holders I…

Downloads
74
Likes
13
Rating
5
P
Printables1967kevin

Wire Stripper/Crimper Mount

I couldn't find a suitable wall mount for my wire stripper / crimper, so designed one of my own. No supports needed if printed standing up as shown in the photo. I have also included a test piece that you can print in a couple of minutes…

Downloads
73
Likes
13
Rating
5
P
PrintablesKevin

Electrical Connector Crimper Case

Thank you to @TheSameNameTwice for the original model for the case. Refer to his model for printing and assembly instructions. I used PLA for the top and bottom, and ABS for printing the smaller parts for durability. However, I think PETG…

Downloads
72
Likes
20
Rating
0
P
Printablesjayjay

Gridfinity SN-28b Crimper

There are many different variants of crimper handle, so make sure it's the same one before you print. I used a 2mm offset for the provided STL, but I think it can go lower to 1mm. Provided f3d file with the cutout, you can check to see if…

Downloads
66
Likes
17
Rating
0
P
PrintablesSeb D

Hook for Electrical Wire Strippers and Crimpers

Wall Mount Hook for a specific set of wire strippers and crimpers: Self Adjusting Wire Strippers like those Ferrule Crimping Tool like those Automatic Crimping Tool for JST like those Print with your favorite material, I used ABS+ Red at…

Downloads
64
Likes
10
Rating
0
P
PrintablesLoogle

TE 160783-7 Gaggia boiler terminal Crimper HS Jaws

Description Crimper jaws and spacers to help with crimping the TE 160783-7 Gaggia boiler terminal connectors. While the wire connection can be crimped with a standard open-barrel terminal crimper such as the Engineer PA-20 in multiple…

Downloads
62
Likes
21
Rating
0
P
PrintablesAustin

paper crimper no screws needed!

This is a paper crimper and it works pretty well so i suggest you use it and it isn’t big at all!

Downloads
61
Likes
7
Rating
0
P
Printablesperrygilchrist

DMC AF8 Crimper - Gridfinity Tool Holder

I wanted a gridfinity holder for my Daniels AF8 Crimping tool and an extra turret. The long slot is just for some extra tooling if you have it.

Downloads
60
Likes
9
Rating
0
P
PrintablesOndřej Sluka

Gridfinity storage for SN-58B crimper jaws

All of the compartments are the same size, even though the jaws are all different. I was lazy, and this seems to work well enough. The SN-06WF jaw protrudes a bit too high above the surface and causes any bins that get stacked on top of…

Downloads
60
Likes
15
Rating
0

Coin Roll Crimper for MKD (Macedonian Denars)

This is my Coin Roll Crimper design for MKD (Macedonian Denars) coins. The design is made in SolidWorks and can be adjusted to fit any type of coins, if you are interested feel free to write me and I will give you the original SolidWorks…

Downloads
54
Likes
10
Rating
0
P
Printableswhoppingpochard

Pegboard Crimper Holder

I've been accumulating crimpers, and needed a handy place to keep them at the ready. This lets me mount them securely to either the wall using #10 screws, or to standard pegboard using my pegboard rivets.

Downloads
52
Likes
6
Rating
0
P
Printablesstythys

1ml Vial Crimper

I take weekly injections from 1ml vials and noticed the medicine evaporates if the cap is not clamped down. I found one person made a clamp but it was for 20mm bottles, so I took the design and resized it to meet my needs.

Downloads
50
Likes
6
Rating
0
P
Printablesn.leinad

Toolcraft PZ-500 Crimper - Die Holder (Expansion)

Bought a couple more crimp dies (or bits) for my Toolcraft PZ-500 crimper, a a tool that can crimp most electrical terminals or connectors. However, the original storage box has limited place for the dies, so I made my own interior with…

Downloads
50
Likes
10
Rating
0
P
PrintablesRen

Pro'sKit crimpers die case

There already is a similar case, I just needed a smaller one. I found the other one non-remixable (poor geometry), so I took inspiration and designed a new one for my set of dies. It's print in place, you need nothing else to complete it.…

Downloads
50
Likes
6
Rating
0
P
PrintablesCraig Kergald

Gridfinity storage for JST crimpers

Gridfinity storage for JST crimpers

Downloads
48
Likes
11
Rating
0
P
PrintablesNukepenguin

Klein Wire Crimper Skadis Mount - No Hardware Required

The original model posted by @Paradox is great, but it requires the use of M2 screws and nuts. I wanted a version of this tool holder that didn't require any additional hardware to use. I added two hooks on the back that will fit onto the…

Downloads
47
Likes
5
Rating
4.5
P
PrintablesKyle

HS Series Crimper Pegboard Holder with seperate die holder (Fully parametric in OpenSCAD!)

Crimpers are hard to mount to a pegboard. They're big, weirdly shaped and have no obvious mounting holes. Additionally, you often get interchangeable dies which are easy to misplace and don't have good ways to organize. There are two…

Downloads
45
Likes
9
Rating
0
P
PrintablesStersh

Gridfinity crimper jaws holder

6U gridfinity crimper jaws holder

Downloads
45
Likes
11
Rating
0
P
PrintablesPranthan

Iwiss Crimper Jaw Holder

This is a stand for organizing the various jaws that come with the iWiss crimping tool linked below. https://a.co/d/eFWPzec

Downloads
40
Likes
5
Rating
5
P
PrintablesJanisz112

SN58B Crimper Gridfinity

A simple 5Ux2U Gridfinity Insert for the SN58B crimping tool (by Lion Rage). Probably compatible with most SN-series tools (ex. SN-28B, SN-48B). Designed in 2 variants: Low profile 3U in height (not stackable) Normal profile 4U in height…

Downloads
40
Likes
12
Rating
0
P
PrintablesBulletDrop

IKEA SKADIS Ali Express crimper

IKEA SKADIS Ali Express crimper, with storage for extra inserts This is the crimping tool

Downloads
35
Likes
7
Rating
0
P
PrintablesShabubu

Dupont and JST Crimper Pegboard Holder

Simple way to hang your dupont crimping tool. Should work with most as long as you hang the tool upside down. Feel free to tinker: https://www.tinkercad.com/things/1OadgBVidm6-dupont-crimping-tool-pegboard-holder Print instructions…

Downloads
35
Likes
8
Rating
0
P
PrintablesSunsetpeople

Gridfinity Box 5x2 RJ45 WorkNet Crimper

Коробка Gridfinity 5x2 для сетевого обжимного инструмента RJ45. Хотелось хранить их в ящике,как и другие обжимные клещи.

Downloads
34
Likes
6
Rating
0
P
PrintablesCursedCustard

Crimper and jaw holders

The crimper holder accepts a 10x5mm magnet to hold the crimper in place and a 5x2mm magnet to hold a hex key (to change the jaws). The jaw holder accepts two magnets to hold each part of the jaw. The jaw posts are 3.5mm in diameter and…

Downloads
34
Likes
6
Rating
0
P
PrintablesCotyPrints

Doyle Wire Crimpers

This imports into the slicer weirdly, just convert to MM or convert to Inches and it should fix itself within the slicer. Feel free to remix!

Downloads
32
Likes
6
Rating
0
P
PrintablesJace

Stackable 2x4 Gridfinity Bin for Engineer PA-24 Crimpers

The Gridfinity bug is running rampant in my shop, and this is just another bin to help me organize my tools. It fits the Engineer PA-24 wire Crimpers. Should print easily on almost any printer, and it can accept 6x2 magnets on the bottom.…

Downloads
29
Likes
10
Rating
0
P
PrintablesGFS

Magnetic frame for storing crimper jaws. 6x1.5 or 5x2.0 magnets, Magazine for 6 or 8 pieces.

A frame for 8 jaws for a crimping tool. A long 2.5 mm Allen key slides in from the side. The frame fits snugly into the case that usually comes with the crimping tool. The jaws fit snugly. Loose jaws are held in place by magnets. I bought…

Downloads
28
Likes
13
Rating
0
P
Printablesash

Grindfinity Bin 2x2 for 3 Crimpers

Grindfinity Bin 2x2 for 3 Crimpers

Downloads
27
Likes
2
Rating
0
P
PrintablesEngiNerded

Ratcheting Wire Crimpers Gridfinity Tray

Ratcheting Wire Crimpers Gridfinity Tray, Amazon link: haisstronica Crimping Tool For Heat Shrink Connectors-AWG 22-10 Ratchet Wire Terminal Crimper-Ratcheting Crimper Tools-Available For Insulated Nylon Connectors and Electrical Wire…

Downloads
24
Likes
6
Rating
0
P
Printablesbobby

Crimper Holder for Honeycomb Storage Wall

I built this to hold me DMC crimpers on the wall. I print it with the tilted prongs up with support on the bottom.

Downloads
24
Likes
10
Rating
0
P
PrintablesSparkticus

Crimper Holder

Just like the title says, it's a crimper holder. The wells are perfect for iwiss or similar tools. An insert is provided for tools with skinnier handles. I printed this in Polymaker ABS. .24mm layer height 3 outer walls w/ .4mm nozzle…

Downloads
24
Likes
3
Rating
5
P
Printablesdenver

SN-58B Crimper Case

Case for SN-58B Crimper and 6 replaceable sponges Кейс для кримпера SN-58B и 6 сменных губок

Downloads
23
Likes
3
Rating
0
P
PrintablesMr Meowz

"ZoeRax" RJ45/RJ11 Cable Crimper Case

A simple case for the ZoeRax network cable crimper

Downloads
22
Likes
6
Rating
0
P
PrintablesMGyula

Crimper pliers box

I have printed from PETG. The wall is thin to fast it print. If your pliers has different dimensions or want thicker walls you can change the Fusion 360 model.

Downloads
22
Likes
4
Rating
0
P
PrintablesKarlD89

Gridfinity storage for Crimpers

A Gridfinity storage container for Iwiss crimpers (IWS-2820M). Not tested with any other crimpers Prints on Prusa MK3/4 bed with no problem

Downloads
21
Likes
3
Rating
0
P
PrintablesMonkichi57

Crimper Die Adapter for Paladin Tools Crimp-All Crimper (or other similar size crimpers with replaceable dies)

I had purchased a set of Dupont crimping dies (https://www.amazon.com/dp/B0774V8HXZ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2) for my Paladin Tool Crimp-all and didn't realize I bought one that was too small for it. I didn't want to…

Downloads
20
Likes
3
Rating
0
P
Printablesmoosepilemini

Simple wall mount wire strippers / crimpers holder

super simple wall mount hanger for strippers . quick print, 36 mins for me

Downloads
19
Likes
1
Rating
0
P
PrintablesAmanda

KF CPTEC Solar Connector Crimper Tool Holder

A quick remix of @Shabubu's 'Dupont and JST Crimper Multiboard Holder' to make it a bit wider to fit larger crimpers

Downloads
19
Likes
1
Rating
0
P
Printablesbelpyro

Crimper Holder (Skadis)

Printed with 0.6 nozzle diameter PLA. Settings: 4 walls, 15% infill, 3 top-bottom layers No supports needed. For second part you should clone and mirror by X-axis the original. You can use a standard 16 mm tube from DIY shop (it uses as…

Downloads
19
Likes
3
Rating
0
P
PrintablesNot2Envy

Amazon HKS Wire crimpers Gridfinity

created a crimp holder for gridfinity system for the amazon HKS Crimper. i used PLA+ 05% infill and Lighting infill.

Downloads
19
Likes
0
Rating
0
P
PrintablesSuperMatt

Vial capper / crimper holder

This is a holder for a ThermoFisher 12mm vial crimper. Category: Tool Holders & Boxes

Downloads
18
Likes
3
Rating
0
P
PrintablesKarel

Climp for RJ45 crimper model TV37

Crimper model: TV37 PLA or PETG, 0.2mm

Downloads
17
Likes
5
Rating
0
P
PrintablesDavid Bram

Wire crimper - generic amazon - Haisstronica

Gridfinity holder for generic Amazon wire crimpers, branded as Haisstronica

Downloads
17
Likes
3
Rating
0
P
PrintablesAESolutions

Wirefy Crimper Pegboard Holder

This is a pegboard holder for the Wirefy quick change jaw terminal crimpers, sized for 1" spacing, ¼" hole pegboard. Pegboard mounting uses 6mm, screw-in/out automotive rivets, which I've found to be easy enough to install and remove with…

Downloads
16
Likes
6
Rating
0
P
Printablesarroyobass

Klein Pass Thru RJ 45 Cable Crimper Gridfinity

This model is a Gridfinity compatible organizer for the Klein VDV226-005VDV226-005 Compact Pass-Thru Modular Crimper as well as a mini cable stripper tool. This is great for organizing your network cable tools all in one convenient place!

Downloads
16
Likes
2
Rating
0
P
Printablesarmaguedes

Triple-slot Gridfinity holder for Someline crimpers (ferrule, Dupont, JST-XH)

This holder fits 2 types of Someline crimping pliers: 2 slots for the Someline 10A4 and/or 10A6 ferrule crimpers (4 jaws and 6 jaws, respectively). 1 slot for the Someline 2350M terminal crimper for Dupont / NSR connectors and JST-XH…

Downloads
15
Likes
1
Rating
0
P
PrintablesFlorent Conty

Crimper Box for Terminal assortment Box 205x105mm

This crimper had no box and i don't wanted to run after it. That why i did this box which is fixed on the Assortment box (zbs. aliexpress). it is done for 205x105mm assortement box.

Downloads
12
Likes
2
Rating
0
P
PrintablesAlvikru

Case with fixation for Crimper Die/jaws

This is a Case for Crimper Die/jaws with content fixation. Suitable for Crimper Die/jaws with holes without cutouts. The sizes of different Die/jaws manufacturers are slightly different. Make sure that your size fits. The distance between…

Downloads
12
Likes
4
Rating
0

SN-58B crimper tool wall holder

I still like to use good old-fashioned boards as tool walls rather than the Skadis system people like these days, so I need lots of custom tool holders mounted by plain wood screws. This is the one I designed for the SN-58B crimping tool…

Downloads
12
Likes
2
Rating
0
P
PrintablesChuffine

Dewalt AFM8 Crimper Insert

This print is designed to fit in this DEWALT box . The crimp inserts should just touch the lid. If it's a little loose, a touch of hot glue will keep it from wiggling. You could also laser cut this out of two pieces of 4mm acrylic, grab…

Downloads
11
Likes
2
Rating
0
P
PrintablesAndrew Lochow

DMC AF8 Crimper Gridfinity Organizer with Turret storage

A gridfinity holder for the AMP AF8 crimping tool, and 6 spots for turret heads. I put the most common ones up there.

Downloads
11
Likes
4
Rating
0
P
PrintablesPatchwork

Gridfinity Cenby Crimpers Holder

Gridfinity holder for Cenby wire crimpers. I'm sure that it will fit other crimpers. I split it into 2 parts so that I could fit them into the ender3 bed. I've included the freecad files, in case you want to edit it.

Downloads
10
Likes
1
Rating
0
P
PrintablesMadebyaCat
Downloads
10
Likes
4
Rating
0