Search results: cutouts

Sort order

161 models

P
PrintablesDean Rogers

Geodesic Dome Cat House - Pine Tree Cutouts

This is a remixed version of Abby575 's amazing design. This remix simply changes the designs of the cutouts in some of the panels as well as reduces the radius on the corners of the pieces to reduce gaps at the joints of multiple panels.…

Downloads
8,548
Likes
7,916
Rating
4.92
P
PrintablesBrett

Parametric Box with Hexagon Cutouts

This is a fully parametric, lidless box that I made as an exercise to learn how to use OpenSCAD. Parameters that can be changed include: box dimensions, wall thickness, corner roundedness, hex radius, and which walls of the box have the…

Downloads
8,316
Likes
1,802
Rating
4.8
P
Printablesweissi

Remix - Parametric Box with Hexagon Cutouts

Remix adds hexagon cutouts in bottom and lid, also with cutouts

Downloads
1,029
Likes
103
Rating
4.82
P
PrintablesMax Theimer

IPhone 12 case with button cutouts

Works great in PLA, PLA+, and PETG, would recommend printing at ca. 103%Z-scaling so the phone fits properly. Bonus-Tip: If you print the case with 10ish vertical shells, but 0 top and bottom layers, you can let the infill (e.g. Honeycomb…

Downloads
542
Likes
30
Rating
5
P
PrintablesjSamz12

HSW- Wall Cutouts

unless you have a whole wall of HSW, having 2 or 4 paels of HSW on the wall can kind of look random or out of place. So i cutout pieces from the HSW to add to the corners of your main panels. It will give the impression that your panels…

Downloads
484
Likes
106
Rating
0
P
PrintablesFAN 3d studio

Box with Hexagon Cutouts

There are many different sizes, both in width and length, and in height, and yet the hexagons are modeled the same in all models and of course they still remain symmetrical.

Downloads
350
Likes
59
Rating
0
P
Printablesphase3d

Nothing Phone (2a) case - REMIX with design cutouts

Remix of @DrCox_1746174's Nothing Phone 2a Case. Added additional cutouts and indents to mimic the original design of the phone. Also added cutouts around the volume and power buttons for easier access. Printed in Glow in the Dark PLA.

Downloads
332
Likes
17
Rating
0
P
PrintablesVash Baldeus

Ender 3 / Pro / V2 Z axis motor mount - T Nut cutouts

This is a remix that was born for the purpose of using this for dual z motor set up on an Ender 3 / Pro / v2. As the original method of mounting the 2nd Z axus stepper motor is similar to the stock one, which will cause issues with…

Downloads
295
Likes
30
Rating
4.5
P
Printablesthall72
Downloads
223
Likes
34
Rating
0
P
PrintablesSven

Raspberry Pi Zero W Snapcase with Cutouts

SnapCase for Raspberry Pi Zero W Dimensions Designed to accomodate an Raspberry Pi Zero W board. Design Process The goal was to create a neat and quality case for the Raspberry Pi Zero W. It should be easy to print and use the minimum…

Downloads
208
Likes
26
Rating
0
P
Printablesjpbruce

Record Vinyl Coasters - Holder with deeper cutouts

I remixed the original holder with some deeper cutouts so that you can more easily grab an exact number of coasters.

Downloads
207
Likes
50
Rating
4
P
PrintablesChevyMonster

20 Sided Dice, Hollow, Face Cutouts, 25 mm Tall

It will print without supports. Mostly.

Downloads
206
Likes
7
Rating
0
P
Printablesm_collectable

Low-Poly Hearts with Lattice Cutouts Makeup Holder - Lovely Vanity Organizer

A stepped makeup organizer with four compartments of different heights for lipsticks, brushes, palettes, and everyday cosmetics. From above, the outer walls form faceted low-poly hearts. The sides use a repeating regular heart lattice so…

Downloads
199
Likes
62
Rating
5
P
PrintablesRebelthor

ESP32 C3 Supermini Case with Pin cutouts

An ESP32 C3 Supermini case that has pin cutouts so you can use breadboard wires.

Downloads
196
Likes
14
Rating
5
P
Printablestrasba

Parametric Box with Hexagon Cutouts (optimized)

This is a fully parametric, lidless box based on Brett's model. I just optimized the preview in OpenSCAD which was not working for larger boxes. Changelog: 12/29/2025 - Optimized rendering for preview Print instructions (orig. from Brett)…

Downloads
190
Likes
29
Rating
5
P
PrintablesDingus

sure.t Mag - Improved Cutouts

I love printed mags. The sure.t mag by t4obrien is my favorite, it works great in most things. Unfortunately when I built a Crush I realized that the mag release cutout on basically every 3d printed mag differs pretty significantly from…

Downloads
187
Likes
32
Rating
5
P
PrintablesKyle

Modular Shell with diamond cutouts

I added diamond cutouts to the shell to reduce material used while printing. Two versions: Large or small diamond cutouts.

Downloads
181
Likes
17
Rating
5
P
Printablesthall72
Downloads
176
Likes
34
Rating
0
P
PrintablesDigitDullness

Skeletonized Flipper Zero Case With Carabiner Ring And Port Cutouts

My magnum opus. A skeltonized case for the flipper zero featuring cutouts for all ports. This case was one of my first designs so sorry if its a little janky. PRINT WITH FLAT SIDES FACING THE PLATE. Infill: 100% Supports: YES Adhesion:…

Downloads
174
Likes
23
Rating
5
P
PrintablesFAN 3d studio

Box with Hexagon Cutouts

Box with Hexagon Cutouts

Downloads
169
Likes
20
Rating
0
P
PrintablesBri0nac

Raspberry Pi Zero 2 W Case with Heatsink & GPIO Cutouts (LED Power/Ground) for Prusa Mini

Modified case top and bottom with 5v and ground GPIO pins cuts to power my LED light. Print List Top (pizero2casebottom) Bottom (pizero2casetop) 2 clips (Clip_wire_interlock) Parts Needed 4x M2.5 screws

Downloads
164
Likes
12
Rating
5
P
PrintablesBenBreaksThings

Slim Azul Tray, hex cutouts

In the land of Prusa, everything gets hexed, including game insert bottoms.

Downloads
161
Likes
15
Rating
5
P
PrintablesdRagnar

Minisforum UM690 case bottom with fan and vent cutouts. (Fusion 360 .f3d included)

I recreated a model sent to me by ThomAce Van Doom on the Minisforum Discord. Included is a Fusion 360 file which is fairly unoptimized, but it should be enough for someone to modify it to their use case. Included is also an example .3mf…

Downloads
156
Likes
9
Rating
0
P
Printablesoriddlero

Solder Spool Holder With Magnet Cutouts for MEtal Plate Solder Stations

Added cutouts for magnets, use as many as you like to make it as strong as you like, the magnets should just press in, however, a touch of crazy glue make them permanent. These magnetic “helping hands” solder station are truly badass if…

Downloads
154
Likes
36
Rating
4.67
P
PrintablesSparq

Tesla Model 3 / Y Backlit Modular Tray Remix - Longer & Rear Cutouts + Options

Great original model - but I wanted to remix slightly to open up use-cases to wider application. The idea of a clear back to utilize the light in the console is brilliant - but I typically don't use PLA for automotive applications or…

Downloads
153
Likes
34
Rating
5
P
PrintablesDenys Shevtsov

AlleyCat's Heltec T114 Pocket GPS Case [LED cutouts] [elevated user button]

Really like the original design by Alley Cat What I was missing - it's the heartbeat LED. Also, for my taste, USR button (bigger one) was too flush with case, so it was a little hard to press. Added a Little tactile bump on it. I added a…

Downloads
150
Likes
26
Rating
5
P
PrintablesJames

Remix: EZPass Toll Tag Holder w/Velcro Cutouts

Some minor tweaks to jimerb's original design Added cutouts to accommodate the Velcro on the bottom. Removed the little tabs on the sides because they are very delicate and don't do much. I used these radar detector suction cups; they fit…

Downloads
147
Likes
24
Rating
5
P
PrintablesDoug

Wine glass tea light lampshade with heart cutouts

A shade for a wineglass tealight candle with heart cutouts. This shade was meant to go over a wineglass that has a tealight in it. The model was designed for a glass with a brim outer diameter of ~66mm. Scale it to fit your glass. I have…

Downloads
144
Likes
33
Rating
5
P
PrintablesJ

OpenSCAD Parametric Item Container / Shell with Customizable Lightweight Cutouts (fully customizable) (HSW) (Honeycomb Storage Wall)

Hi everyone. I am very proud of this one and it has a lot of features. I made this to be used with my Honeycomb Storage Wall setups. As such, whenever I make a model I will simply create it through OpenSCAD, put it into Orcaslicer, and…

Downloads
127
Likes
7
Rating
0
P
Printablesfuchsr

Back rear corners with cable cutouts for Slack Lack enclosure

I have added cutouts to the Slack Lack bottom rear corner to run cables into and out of the enclosure, similar to how it's done in the original Lack enclosure. This is the left bottom rear corner and corresponding catch. Simply mirror the…

Downloads
116
Likes
23
Rating
5
P
PrintablesJason Englert

Core One Printhead Cover Left mod with cutouts for accessing heater and thermistor connectors

The Core One Printhead Left Cover with cutouts for access to the heater and thermistor connectors. There is a compromise I made between the ease of removing the connections, printability, and still functioning as protection of the rest of…

Downloads
111
Likes
45
Rating
5
P
Printablesgoaliemanshark

Tstak 2 drawer gridfinity base, with cutouts

The model didn't fit my tstak model (version 2) so I very crudely cut out the model in Prusaslicer and exported the STLs

Downloads
111
Likes
32
Rating
0
P
PrintablesChris Trotman

Sony a6700 Gridfinity Bin - With Peak Design Capture Clip Cutouts

I always leave the Peak Design Capture Clip plates on my cameras, but also wanted to use this fantastic gridfinity bin for the Sony a6700! I've added two different versions - one should fit the smaller Peak Design Capture Clip plates,…

Downloads
110
Likes
17
Rating
0
P
PrintablesdougRN

2U Server Rack Blank Panel with Hexagon Cutouts

This is a blank panel with hexagonal cutouts used to cover unused 2U sized openings on a 19" (482.6mm) server rack. You'll need to print 2 ends, 1 center, and 8 bowtie connectors for each panel. The bowtie connectors have a 1 degree taper…

Downloads
104
Likes
13
Rating
0
P
PrintablesJeffCurless

Pimoroni Display Pack Case - With cutouts for PICO(W)-H

No special print settings, I have printed approximately 40 of these for School… case works well with multiple students working on them.

Downloads
104
Likes
11
Rating
3
P
PrintablesDIYwithJJ

Electric outlet template for drywall cutouts

See youtube video for details:

Downloads
102
Likes
18
Rating
0
P
PrintablesKristianLaholm

Mobius intersecting with cutouts

A challenge for your printer. Mesh file in 2 orientations and step file with/without fillets. Give it a try printing and post your result Test print is ongoing ...

Downloads
101
Likes
16
Rating
5
P
Printablesfmai

Raspberry Pi IR nightvision camera case with heatsink cutouts

The original model is great but lacks the possibility to put heatsinks on the back of the IR-LEDs. I added two pockets with 11x11mm.

Downloads
99
Likes
11
Rating
5
P
PrintablesVeraxlon

Box with hexagon cutouts and lid

Box with lid that i made for learn Fusion360

Downloads
99
Likes
13
Rating
0
P
Printables7FM

Camera - ESP32 CAM (globe design) with SD & Flash LED cutouts

Modifications Front: Cutout for accessing the SD Card Cutout for the Flash LED Shifted Camera Cutout Modifications Back: Bigger Power Cable Cutout to support gluing of micro usb breakout boards Category: DIY

Downloads
96
Likes
10
Rating
0
P
PrintablesFAN 3d studio

Box with Hexagon Cutouts

Box with Hexagon Cutouts

Downloads
94
Likes
10
Rating
0

DB_Mount_CrealityMK8 v2 with proper insert cutouts

*Added cutouts for 4mm M3 Heat inserts, to mount the extruder to the toolhead. *Fixed orientation of the model, shortened the total length of the end prongs sticking out. (unnecessary, prone to breakage after printing in original model)…

Downloads
93
Likes
7
Rating
0
P
PrintablesShuriken

RC Wheel Loader CAT cutouts

Rear hatch with cutouts for CAT logos, they just need to be glued on to the hatch.

Downloads
90
Likes
7
Rating
0
P
PrintablesTomáš

Prusa MK4 bin with cutouts for anti-vibration feets

I have make cutout for true functional anti-vibration feet model from schuetzi99 . The cutout fits for MK4 standard feet with slip protection version (URL to the right STL). I have used the PrusaSlicer 2.7.0 only so the .3mf file is a bit…

Downloads
89
Likes
19
Rating
5
P
Printablesforsaken_candy

openGrid parametric generator w/ custom cutouts

DONE ✅ Custom sizes ✅ Drawable cutouts ✅ Straight or threaded screw holes ✅ Selectable screw hole locations ✅ Multiboard-compatible screw holes ✅ Specify dimensions in mm TODO Fill extra space Stacked printing <Suggest more in comments…

Downloads
88
Likes
33
Rating
0
P

AIO Fan Spacer – 2mm & 4mm (Squircle Cutouts) 240mm, 280mm, 360mm, 420mm

AIO Fan Spacer – 2mm & 4mm (Squircle Cutouts) This fan spacer is designed to improve airflow efficiency and reduce turbulence when mounting 120mm & 140mm fans to a AIO radiator. It creates a small, controlled gap between the fan and the…

Downloads
88
Likes
3
Rating
0
P
Printablesaddictedtuna

Raspberry Pi Zero 2 W Case with Heatsink & GPIO Cutouts (LED Power/Ground) for Prusa Mini w/ repaired cracks

Everything is the same, but in original file you can see cracks around Raspberry Pi logo. So I repaired them for better aesthetics and easier printing. Enjoy ;) Print List Top (pizero2casebottom) Bottom (pizero2casetop) 2 clips…

Downloads
86
Likes
16
Rating
5
P
PrintablesMB

Twin bottle cap - with cutouts for o-rings.

Tried original version, which worked great but was not really suitable for liquids. This is my humble attempt to fix that. Initial dimensions based on jebissey's twin bottle cap design ( https://www.thingiverse.com/thing:5482037 ). After…

Downloads
83
Likes
8
Rating
0

30mm Captured Ball with 16mm cutouts

This is my first submission while I wait for my MK3S+ to arrive. Expect great things.

Downloads
79
Likes
17
Rating
4.67
P
PrintablesSven

Arduino Uno Snapcase with Cutouts

* SnapCase for Arduino UNO * Dimensions Designed to accomodate an Arduino UNO board. Design Process The goal was to create a neat and quality case for the UNO board that protects it while still allowing access to all major I/O points.…

Downloads
78
Likes
11
Rating
0
P
Printablesrittme

Unifi UCG-Fiber 10-inch Rack Mount with cutouts

A remix of Unifi UCG-Fiber 10-inch Rack Mount by @Mauker. It's a version cut down into pieces to print without support

Downloads
75
Likes
10
Rating
0
P
Printableswillnewton

SSR relay cover with clips and cutouts

A remix of a remix! I added some cutouts near the connection points so it will clip properly if you are using plastic covered crimp connections or thick wires. Print Settings Printer Brand: MakerGear Printer: M2 Rafts: No Supports: No…

Downloads
75
Likes
3
Rating
0
P
PrintablesRadBench

Pixel 4a TPU Case with Cutouts for Buttons and Swiping

MisterIXI's model was the best one I tried and it works great. I just made a couple changes based on my personal preference. I cut out the button section because I like the 'clicky'-ness of the buttons and I cut out a section on the left…

Downloads
75
Likes
8
Rating
0
P
Printablesrmwphd

Encoder Knob Shaft Cutouts & Example Knobs

Here are models of the shafts of EC11 flat shaft and EC12 shorty rotary encoders, commonly used in the custom keyboard hobby. I've added a 1° draft to each shaft to make the fitment easier. Just grab your preferred format, bring it into…

Downloads
74
Likes
8
Rating
0
P
Printablesflamwenco

Voron 0.2 printed bottom panel with 4010 fan cutouts

I wanted to put stealth skirts with some 4010 noctuas on my V0, but the 4010s aren't compatible with bottom panels because of their height, so this adds some cutouts to the sides to allow for 4010 fans.

Downloads
73
Likes
21
Rating
0
P
Printablesthall72

Lego Compatible (3396.dat) Tile 2 x 2 with Two 1 x 1 Curved Cutouts

This model is compatible with the lego system.

Downloads
71
Likes
15
Rating
0
P
PrintablesJGFTW

Hexahedron - geometric cube with cutouts for decoration

Technically probably not hexahedron as it has more than six faces ¯\_(ツ)_/¯ Looks great while printing and on the desk as well. Gif from slicing: https://imgur.com/jWYKVmk

Downloads
69
Likes
10
Rating
0
P
PrintablesMaxR

S25 Ultra Camera Cutouts for Spigen Liquid Air Case

I made this because I prefer cases with individual camera cutouts. It should be able to be pressed onto the cameras when the phone is in the case. It sits tight enough to not fall out. When using a 0.4mm nozzle, make sure to enable…

Downloads
67
Likes
7
Rating
0
P
PrintablesRonFalafel

Oneplus 15 case with camera protection and button cutouts

If you just want a good solid case, print "OnePlus15BlankCaseWithCutoutsAndCameraProtection.stl" and "OnePlus15CaseCameraProtection-Thick.stl" I printed "OnePlus15BlankCaseWithCutoutsAndCameraProtection.stl" in 95A TPU and…

Downloads
66
Likes
2
Rating
0
P
Printablescliftoce

Clockwork 2 Main Body with ECAS & USB Cutouts

A simple combination of two mods to the Clockwork 2. I wanted a way to secure the PTFE tube (needed for use with the ERCF) but also a little extra space behind the cowling for a nozzle cam USB cable.

Downloads
63
Likes
10
Rating
0
P
PrintablesElectricblue71

HOTEND HOLDER for Flashforge Adventurer 5M / 5M Pro (remix with larger cutouts and provision for magnets)

9mmplease's hotend holder for the Flashforge Adventurer is a neat design as it allows easy access to the most common sizes of hotends. However I had issues printing the original hotend with my 0.6mm nozzle at a 0.3mm layer height. The top…

Downloads
58
Likes
4
Rating
0
P
Printablesvzom

The Crew: The Quest for Planet Nine Insert/Organizer - Added Cutouts

This is identical to this insert created by fuchsr , with a small modification. Two additional cutouts were added to the insert. The cutouts are to allow some extra space under the cards. This in turn should make it a easier to remove all…

Downloads
57
Likes
9
Rating
5
P
PrintablesJ

QidiQ2 Box Riser 70 mm Clearance with Side Cutouts

This is a modified version of the original riser, adapted to improve usability and access for my setup. I increased the clearance to the glass plate to 70 mm , which makes it much easier to remove the glass panel. It also provides enough…

Downloads
56
Likes
13
Rating
0
P
Printablesmillerhack

Nautilus Shell (Ursula Seashell without cutouts or ring)

Printables re-post of a remix I created and posted to Thingiverse on 2021-10-05: https://www.thingiverse.com/thing:4982218 TL;DR : this is a remix of Nautilus Shell by @tc_fea that has been scaled and mirrored to be identical to the…

Downloads
54
Likes
2
Rating
0
P
Printablesm_collectable

Clover Low-Poly Hearts with Lattice Cutouts Makeup Organizer — 4-Compartment Vanity Holder

A four heart clover shaped makeup organizer with low-poly faceted walls and a repeating heart cutout lattice. Four compartments of different heights keep lipsticks, brushes, pencils, and compact palettes sorted on a vanity. Open lattice…

Downloads
53
Likes
22
Rating
0
P
PrintablesPloique

GearHeart with cutouts

After Multiple designs, I wanted one that I could fidget with... I found it was difficult to spin the gears without cutouts. The full side cutouts didn't have the full heart shape when viewed from the top..... I made 3/4 cutouts for left…

Downloads
51
Likes
12
Rating
5
P
PrintablesFS5

Gridfinity 2x2x9 Hex Cutouts

Gridfinity 2x2x9 with hex cutouts. No magnet holes.

Downloads
51
Likes
4
Rating
0
P
Printablesblakewolfex

skull mask mod - personal fit with cutouts for electrical components

My Build Settings Material: PLA Layer Height: 0.2mm Wall loops: 6 Alternate extra wall Top/Bottom Shell Layers: 5 Infill: 25% Grid First Layer Speed: 50mm/s Speed of Everything Else: 80mm/s Slow Down For Overhangs Supports: Tree, On Build…

Downloads
50
Likes
23
Rating
0
P
PrintablesMichaellumos

Hek Lok with locking tab and M5 nut cutouts

Added a pip locking tab and M5 nut cutouts. Love the design!

Downloads
47
Likes
6
Rating
4
P
PrintablesBen090

Bit driver with relief cutouts and keyring hole

Remix of Bit driver Added relief holes and keyring hole

Downloads
46
Likes
9
Rating
5
P
PrintablesBracken

So Make It Swiss Army style keyring V2 with thumbnail cutouts

MarkBenson's mod of the the swiss keyring with the So Make It hackerspace logo embossed on one side. Printed example shown was acetone smoothed at 20C for 2 hours. Print instructions Category: Tools Summary MarkBenson's mod of the the…

Downloads
40
Likes
5
Rating
0
P
PrintablesBren

Tri-Bahtinov Mask for C6+Hyperstar with Celestron Dew Heater Cutouts

This is Cuiv's Tri-Bhatinov mask he designed for use with a Celestron C6 and Hyperstar, but with a cutout to support the Celestron Dew Heater. This worked well, along with recentering the corrector plate, to significantly improve my…

Downloads
40
Likes
3
Rating
0
P
PrintablesRonFalafel

Oneplus 15 Case with button cutouts

A remix of the Oneplus 15 case that has cutouts for all of the buttons.

Downloads
39
Likes
3
Rating
0
P
PrintablesMolybdenum

BentoBox Base with switch cutouts and wire management

Added switch cutouts for the switch I purchased from AliExpress , added two pass through holes for wires, and made a cutout in the back to have space for wiring. I should have purchased a 3-positition switch, but used 2 switches to allow…

Downloads
39
Likes
12
Rating
0
P
PrintablesMarius Beyer

box with circle cutouts for learning fractions

box has a sliding lid I glued one part to the corresponding place to have a sample piece I plan to develop an improved version. Please feel free to leave me suggestions for improvements.

Downloads
38
Likes
8
Rating
0
P
Printablesmpminiuser

Flat top Keycaps (MX Cherry) with cutouts for M2.5 screw head

My modified stl file holds 12 keycaps and 8 of those are modified with cutouts. Other keycaps were printed from the original STL file. The example in the photo were printed on a FDM printer with 0.2mm layer height. I am reprinting the…

Downloads
36
Likes
5
Rating
0
P
PrintablesCor ten Hoor

settlers of catan bord rim with cutouts for trading ports

settlers of catan bord rim with cutouts for trading ports they adapt to the existing cardboard Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.12 Infill: 20% Filament: 123 3D Jupiter PLA Blue Notes: settlers of catan bord…

Downloads
34
Likes
8
Rating
0
P
Printablesjandj

Slim Beepy Case Front, with GPIO cutouts

Amended the existing slim flat beepy case - https://beepy.sqfmi.com/docs/3D (rev 6) - and added cutouts in the Front piece for GPIO pins to stick out

Downloads
34
Likes
2
Rating
0
P
Printablessteven.m25

EZPass Toll Tag Holder w/Velcro Cutouts Stronger

This is for the new generation of the NE US EZ Pass toll tags. There are a few holders here and they didn't seem to fit as well as I wished. The arms were a little thin and didn't really contact the EZ Pass as I wished. I don't know how…

Downloads
32
Likes
2
Rating
0
P
PrintablesDaniel Duchrow

AI-on-the-edge Adapter 100mm with Cutouts

Simple Remix for bigger Watermeter (100mm), Lid-Cutout and another Cutout because of Water-Meter-Housing

Downloads
30
Likes
1
Rating
0
P
PrintablesJeremy Menefee
18+

The source marked this model as adult content.

Downloads
28
Likes
9
Rating
0
P
PrintablesREDDLINE

ENDER 3 PRO - SKR MINI E3 V3 CASE PCB BACKSIDE PIN SOLDER JOINT CUTOUTS

So I originally printed out the SKR MINI E3 V3 Case created by MrTeliP, but when I installed by SKR Mini E3 V3 board it wouldn't sit flush in the case by either 1mm on one side, or by a 4-5mm on the other side. It looked like with my…

Downloads
27
Likes
2
Rating
0
P
PrintablesYO3GND

J4JXL remixed lever arms with magnet cutouts

lever arms now include a magnet cutout, and magnet holders for the screws are also included

Downloads
23
Likes
2
Rating
0

iPhone 17 DN40 Dock - Original Silicone Case WITH CUTOUTS - Made by: ScottYu-Jan and OVERWERK

Found this dock but discovered that it fit so well that the side buttons were registering as being pressed. I simply added cutouts for the power and volume buttons so they wouldn't get pressed.

Downloads
23
Likes
1
Rating
0
P
Printables3D_Frank

1/4 Sheet Paper Holder with Cutouts

I prefer to cut up recycled paper into ¼ sheets with a paper cutter instead of paying for sticky notes. This holder keeps everything together. Print settings: .2 Layer Height Wall Lint Count = 3 15% Infill 100 mm/s 6 hour print time 72g -…

Downloads
23
Likes
2
Rating
0
P
PrintablesWillow (GHOST)

LEGO 2x10 Plate with Cherry MX Cutouts

A 2x10 LEGO compatible plate with 3 cutouts for Cherry MX Switches. You'll need keycaps that are not too much wider than the switch itself, due to non-standard spacing between the switches and boundaries of the lego plate (I used these…

Downloads
22
Likes
3
Rating
0
P
PrintablesDuzi

Plastic cover with cutouts for frosthaven storage trays

Plastic version of the cover for frosthaven Vanity storage made by NR This way you dont need a plex. Ive added some labels to simplify searching for all the monsters

Downloads
22
Likes
3
Rating
0
P
Printablessuomi35

fan-case R2 with extra material around the tab cutouts

The tabs broke off the fan case part while assembling the MK4S upgrade kit, despite treating the part with care. PCCF is quite brittle in these areas, so I decided to add some more material there, and fully enclose the outside of the…

Downloads
21
Likes
1
Rating
0

The box for drills of cutouts of stoppers

I ordered drills for the manufacture of wooden plugs in China. Unfortunately they came in bulk. I had to make a box for them. The result is a compact storage Please take a look at my page, maybe you will find something interesting for…

Downloads
18
Likes
3
Rating
0
P
PrintablesDommett

Stackable box with bevel front AND arch cutouts to save filament

By using arch shaped cutouts, you will save on filament and printing time. This works fine if what you are storing is bigger than the arches. You can resize the box to your liking. I printed with PLA with 15% infill and they came out…

Downloads
16
Likes
1
Rating
0
P

Kurpie paper cutouts

This ornament is inspired by Kurpie paper cutouts. Originally, the ornament is cut from paper using scissors. It's characteristic of the folk art of the Kurpie Green and White Forests in Poland.

Downloads
16
Likes
4
Rating
0
P
PrintablesAlecks

Malolos Pi Case Wallmount with cutouts

I made this wallmount with sided cutouts for the Malolos Pi Case. Category: 3D Printer Accessories

Downloads
16
Likes
2
Rating
0
P
Printablesnicdiomaro

Hydroponic Tower Pipe Cap with 2 Cutouts

I needed a cover for my hydroponic tower that has cutouts for water lines to go through.

Downloads
16
Likes
3
Rating
0

Lengx Extended Butt Plate with Cutouts

Watch the original build video: https://youtu.be/jKdu9TzRMRw Remixed these parts as part of a Lynx build I did. I wanted the extended butt, but I wanted it to be clean. The other half saw the cutouts in the print and asked if I could fill…

Downloads
15
Likes
3
Rating
0
P
PrintablesChris E

USB Cable Spiral Ring Cord Organizer with Cutouts

An approximately 80mm diameter ring to accommodate a rolled up , wrapped, spiraled cord, rope, or string.

Downloads
15
Likes
2
Rating
0
P
Printablescanecanman

5 1/4 in drive bay cover with switch cutouts

Used for my indymill CNC mill. Cutouts for power switch, pause button (12mm) and spindle power switch.

Downloads
15
Likes
0
Rating
0
P
PrintablesJdsfighter

Raspberry Pi IR Camera Back Enclosure with Cutouts

The original design did not include cutouts on the back for the screws that mount the IR modules to the camera. This required the user to bend the front faceplate around the camera to get it to screw down. To fix that, I created 2 models.…

Downloads
14
Likes
2
Rating
0
P
PrintablesPetr Dobry

Haribo 3030 X-axis with belt tensioner and cutouts for couplers

This is the remix of the original x-axis from Prusa with additional belt tensioner. If you have Haribo and original Prusa motors (with integrated rod), it works fine, but when you have steppers and Z threaded rods connected using…

Downloads
14
Likes
1
Rating
0
P
PrintablesCheeseMcGee

CR-10 FANG OEM fan duct - V2 plate with M3 cutouts & EZABL

I use the EZABL addon and without an M3 nut, I didn't feel it was stable enough. After trying to hold a nut with tweezers into the small space available, I decided to throw together this quick remix. Apply a dab of superglue to hold the…

Downloads
13
Likes
0
Rating
0
P
PrintablesElGuano

Apollo MSR-1 Case with GPIO cutouts

This is a modified case for the Apollo MSR-1 mmWave radar sensor from Apollo Automation. The MSR-1's pcb has solder pads for 5v, 3.3v, ground and GPIO/I2C, for great extensibility. But you can't easily solder leads to the pads with the…

Downloads
12
Likes
1
Rating
0