Search results: d6

Sort order

631 models

P
PrintablesAlberto Nidasio

RD6006 case

This is a case for the RD6006 variable voltage regulator. The design accounts for some ventilation holes and 4 points with which you can remove the RD6006 from the case. Unfortunately in my print the top part broke off. I printed only…

Print approx. €9.57–€11.70 excl. taxPreliminary estimate for one variant

Downloads
490
Likes
29
Rating
4.75
P
PrintablesFonz

RD6006 DC Power Supply Desk Case

Desk housing for the Riden RD6006 Power Supply Controller, for use with an external DC power supply. In use with a 19V, 5.5A external DC power supply. Hole the on back panel is 7mm to fit a panel mount DC connector. Handles are an…

Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant

Downloads
472
Likes
40
Rating
5
P
PrintablesRoadsideRC

Sakura D6 Rear Shock Standoff

I wanted to modify how the rear of my Sakura D6 shock mounted - I wanted the mount lower and extended - so created this file! Printed in PLA with 50% infill works great. The lower screw hole is tight - but it will get there. Two files are…

Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant

Downloads
205
Likes
10
Rating
0
P
PrintablesYveske

Nikon D3, D4, D5, D6 & Z9 battery holder (parametric)

A parametric battery holder for Nikon EN-EL18 series batteries Added a lid (also parametric)

Print approx. €2.08–€2.55 excl. taxPreliminary estimate for one variant

Downloads
196
Likes
21
Rating
4
P
PrintablesGreatOldOne

Dual RD6006 / RD6012 Bench Supply

A case to house two RD6006 units and a PSU to drive both. [EDIT 28/05/20] - the RD6012 should fit as well, as the dimensions appear to be the same. I say should, as I don’t have one to try... but the sizes on the RD tech site are the same…

Print approx. €1.51–€1.85 excl. taxPreliminary estimate for one variant

Downloads
83
Likes
15
Rating
0
P
PrintablesAntonio

Junction box for Hikvision DS-2CD63C5G1-IVS cam

UPDATE: added stl file as required It was nearly impossible tu buy a junction box for my Hikvision cam, out of stock or not available, so I modelled one to be similar to his original one DS-2280ZJ-WA140. Printed in petg, 25% infill,…

Print approx. €6.21–€7.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
49
Likes
6
Rating
0
P
Printableslienmeat

Mount for HOTA D6 Pro LIPO battery charger to Bat-Safe

This mount allows you to keep your HOTA D6 battery charger attached to your Bat-Safe securely. I fly RC planes and take the Bat-Safe full of batteries to the club field with me, and this makes it simple to carry and move around without…

Print approx. €5.73–€7.00 excl. taxPreliminary estimate for one variant

Downloads
24
Likes
2
Rating
0
P
PrintablesW&H

Ikea skadis big dice (d6) holder

Big d6 dice holder for Ikea Skadis. Max length and width of dice: 27 mm. Supports: Yes, for Skadis attachment Filament: In my case Prusament PLA Vanilla white

Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant

Downloads
21
Likes
6
Rating
0
P
Printableskevsparky

Riden RD6006 Mini Case

This is a small bench-top case for a combination of a 48V LED power supply and a Riden RD6006 DC Power Supply. To complete this, you'll need: 1x Riden RD6006 DC Power Supply 1x 48V 100W LED Power Supply 1x C13 Socket (or any other with…

Print approx. €11.23–€13.73 excl. taxPreliminary estimate for one variant

Downloads
14
Likes
3
Rating
0
P
PrintablesAtom's Lab

ASTM D638 Tensile Strength Test Pieces (5 Types)

Simple models made in accordance with ASTM D638 testing for polymers. Type I through Type V available. Public domain - Use as required without restriction

Downloads
2,742
Likes
88
Rating
5

Cracked D&D dice set (D4, D6, D8, D10, D12, D20) fixed and optimized for printing

Cracked D&D dice set (D4, D6, D8, D10, D12, D20) fixed and optimized for printing

Downloads
1,065
Likes
122
Rating
5
P
PrintablesSSKopaka

ASTM D638-14 Specimen Type I

ASTM Standard Tensile Test Specimen Type I with 3.2mm thickness as defined by ASTM International's publication D638 (Standard Test Method for Tensile Properties of Plastics) version 14

Downloads
986
Likes
4
Rating
5
P
PrintablesMcAbra

Drywall CD60 profile mount aid (uchwyt do karton-gipsów)

Why? My buddy showed me those when we were talking about a drywall ceiling I was about to put up in my living room. While many different tools like that exist already I wanted to make my own to practice CAD and add mounting for the “laser…

Downloads
965
Likes
150
Rating
5
P
PrintablesUgly Robot

D6 Roller Bullets, dice and spinning container

Inspired by basicweech , thank you! I'd seen bullet roller d6s, so I wanted to 3d print my own, and provide a spinning fidget case. I printed the dice in resin, and the case in FDM - but you could likely print both with either. Feel free…

Downloads
957
Likes
369
Rating
5
P
Printables-INSOMNIAC-

Hollow D6 Dice (with builtin support)

Simply a hollow, rounded D6 dice. It should be printable without any support at all. Below the faces, there are built in support bridges. Below every face, so the weight is somewhat distributed equally. It surely isn't casino-perfect of…

Downloads
904
Likes
58
Rating
5
P
PrintablesMFTuning

Chamfer milling D68mm

..:: РУССКИЙ ::.. Приспособление для снятия фаски в ГВЛ (Гипсокартон) для углубления подрозетников. Для использования необходимо прикрутить два трапецевидных лезвия с отверстиями:…

Downloads
803
Likes
57
Rating
5
P

Dübel d6-D8x39 8Stück

Dübel d6-D8x39 8Stück Ich empfehle PETG und 100% Füllgrad. Der seitlich angebrachte “Flügel” ( Verdrehsicherung ) gehört beim Druck natürlich nach unten. Bei Verwendung von ABS, PC oder Nylon kann es zu Warping beziehungsweise…

Downloads
720
Likes
107
Rating
4.67
P
Printablespsy_the

Electrical socket box hidden cover D68mm / скрытая крышка подрозетника 68мм

Electrical socket box cover for hidden installation (inside box). Size: D=64,5mm PETG, layer size: 0.28mm Infill: 100% Supports: No

Downloads
665
Likes
68
Rating
5
P
Printablesjferris11115

ASTM D638 Type IV "dogbone"

ASTM D638 Type IV "dogbone" used for material tensile testing

Downloads
613
Likes
12
Rating
0
P
PrintablesPandanutiy

Mechanical D6 dice

Redesigned the Mechanical dice by Pieter, pretty much everything is changed except for the mechanism. List of changes: More forgiving tolerances. Original model, that i have printed on my somewhat calibrated Sovol SV06 was unfortunately…

Downloads
594
Likes
83
Rating
3.67
P
PrintablesIIGuard5KII

FIFINE D6 - stand

Stand for FIFINE D6 for those who are not satisfied with the default angle of stream controller. I also added space for 8x AA batteries. This space was created with the XBOX controller in mind. Notes: Created with the “Tree(Auto)” support…

Downloads
563
Likes
30
Rating
0
P
Printablesfymetool

Brackets CD60

Wsporniki ułatwiające wypoziomowanie profili płyt kartonowo-gipsowych CD60. W połączeniu z laserem znacznie ułatwiają pracę, zwłaszcza w pojedynkę. I used ready-made M5 bolts and M5 nuts. Or you can use regular M5x20 screws and print…

Downloads
519
Likes
75
Rating
0
P
Printablessteair

Squircle-face Dice (D6)

I needed to print a dice but couldn't find one with a fully satisfying aesthetic. So I designed one with a pleasant squircle face shape, classic but refined. The file is 20x20x20 mm and optimized for 3D printing. Scale it as needed. Have…

Downloads
514
Likes
29
Rating
5
P
PrintablesPolecat Prints

Dice Box & Dice (D6)

Dice Box & Dice (D6) 🎲 This is a small-ish box for fitting 20 (15.75mm³) D6 dice. There is an .stl included for a D6 die that fits. You can print 20 of those and paint the pips, if you don't have access to cheap dice. It unfortunately…

Downloads
434
Likes
39
Rating
0
P

D6 Vintage- Dice - Würfel

D6 with vintage esthetics. 6 sided Die. Made with Fusion 360. Numerals filled with epoxy resin and copper particles. See also my other Dice: https://www.printables.com/de/@KleinerLateiner/collections/1514460 D6 in klassischem Design.…

Downloads
432
Likes
42
Rating
5
P
PrintablesBlomsD

Dell D6000 Desk Mount

Designed a mount to hold a Dell D6000 dock to the bottom of a desk. It is designed to slide in from the back with a clip built in to add friction to hold it in place. The holes are setup for #8 pan head screws. Features: Tool-less…

Downloads
417
Likes
34
Rating
5
P
PrintablesMichael Murray

3D60S - Modular, 3D Printed Xbox 360 Slim Shell

The first fully modular, no solder needed 3D printable shell for the Xbox 360 Slim! Key features: Fully modular - Being able to 3d print this in separate pieces allows you to swap parts out if they break or if you decide to change…

Downloads
365
Likes
54
Rating
0
P
Printablesbobmakes

Large D6 Dice

Print yourself 6 of these dice, and they store nicely in a 5 Gallon Bucket, which you can use to roll them! Score sheets are printable off of Google Images. There are way more games to play than just Yahtzee and Farkle, if you don't have…

Downloads
354
Likes
24
Rating
5
P
Printablesmrochford

Dell D6000 Dock Mount

Use to mount a Dell D6000 dock to a flat surface

Downloads
346
Likes
27
Rating
5
P
PrintablesMilan Santa

Socket pro počítačový stůl, D60 mm

Socket pro počítačový stůl, D60 mm

Downloads
343
Likes
194
Rating
0
P
Printablesdbordak

D6 Travel Dice Holder

Update 2023-04-01: Added a chamfer to the bottom of both the body and the lid (relative to print direction), and a recess on the bottom middle. Thanks for the suggestion, Florian Radlberger-Freude ! Cylindrical dice holder that holds 36x…

Downloads
339
Likes
73
Rating
5
P
PrintablesDennis Oonk

D6 Dice

Dice with six sides

Downloads
325
Likes
9
Rating
0
P
PrintablesMatschineggN

World of Warcraft Horde d6

World of Warcraft Horde d6 - Works great as a quick test print to test new filaments print settings. And all the extra dice are great for game nights.

Downloads
324
Likes
75
Rating
5
P

Karcher WD6 (and compatible) suction hose hand grip (like 2.863-012.0) / Krümmer für Karcher WD6 (und Kompatible, wie 2.863-012.0)

This is a suction hose hand grip (like 2.863-012.0) for my Karcher WD6 Premium vacuum cleaner. There are three versions attached. Because of the height for some printers it's shortened for the Ender3 and Prusa i3. It's meant to be printed…

Downloads
318
Likes
40
Rating
0
P
PrintablesHexiBase

HexiBox Series: Dayton Audio ND65-4 Rear-Loaded Horn

As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.

Downloads
293
Likes
41
Rating
0
P
Printablesanjo2

Elgato HD60X bracket mount

Recommended to print vertically.

Downloads
280
Likes
19
Rating
5
P
PrintablesMaxi

Type-C USB PD65W DC8-32V 3.25A 65W DC 5.5X2.1

https://www.aliexpress.com/item/1005005986842547.html

Downloads
280
Likes
29
Rating
5
P
PrintablesHA60_Design

Bloons TD6 'Nail Sentry' prop model

Bloons invading your garden? Need some extra protection against the Mother of All Bloons? Well, the Engineer Monkey has you covered! Celebrating the release of the Master Builder Paragon update for Bloons TD6, this ‘Nail Sentry’ can be…

Downloads
277
Likes
34
Rating
4

MOVED TO MAKERWORLD - FIFINE AMPLIGAME D6 Stand

ONLY ON MAKERWORLD NOW SORRY Link Here: https://makerworld.com/en/models/1031476-fifine-ampligame-d6-stand#profileId-1014329 Bought the FIFINE D6 Stream Dock since the official ELGATO one was out of my budget but didn't like the angle it…

Downloads
276
Likes
13
Rating
5
P
PrintablesDmytro

Case for 4-way PD65W fast charging module

The height of the case is designed to place 12 mm high radiators for better cooling of the chokes and PWM controller. If you want to use a board without a heatsink, the height of the case can be reduced in the slicer. Personally, I don't…

Downloads
275
Likes
24
Rating
5
P
Printablespvillano

MMU D6

A d6 die with numeric pips that extend into the surface. Created with solidpython and OpenSCAD A d6 die with numeric pips that extend into the surface. Print with 100% infill to be fair. If using white and red, have extra large purging…

Downloads
272
Likes
23
Rating
4.75
P
PrintablesTeska
Downloads
271
Likes
20
Rating
0
P
PrintablesSubierekt

Type-C USB PD65W DC8-32V 3.25A 65W bare wire version

simple box for aliexpress module QC4.0 QC3.0 Type-C USB PD65W standard bare wire version

Downloads
270
Likes
36
Rating
0
P
PrintablesWhity

Riden Dual RD6006/RD6012/RD6018 PSU Case

Two RD60xx PSU in one case using a single 1000W power supply as power source (800 & 1200W are also available, see link below). Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ).…

Downloads
246
Likes
32
Rating
0
P
PrintablesHellmark

D6 Dice

Currently scaled to 50mm for jumbo dice, but scale down to what ever size you want. Casino dice are 19mm, and standard gaming dice are 16mm. Mini dice are commonly 12mm. Print it in your favorite material, and paint the dots.

Downloads
244
Likes
11
Rating
5
P
PrintablesGuinuf

Drain Plug Karcher WD6

After losing the drain plug of my karcher vacuum cleaner, I modeled one that I share with you here. I preferred to print it in PETG but I think PLA can be good too. In addition to the printed part you will need an 17x3mm O-ring to seal…

Downloads
240
Likes
14
Rating
5
P
PrintablesTactil Design

Underdesk mount for Dell D6000 USB-C station

Hi everyone, I tried double sided tape for some time and it didn't work really well so… 3D printing to the rescue! This is a simple mount that fit the Dell D6000 so it can be fixed under your desk.

Downloads
235
Likes
20
Rating
5
P
PrintablesGustaf Fjaestad

Bosch GEX Sander to Kärcher WD6 Vacuum Adapter

Dust collection adapter to use a Kärcher WD6 (or other Kärcher WD vacuums) with a Bosch GEX 40-150 sander (or other Bosch GEX sanders). Print in PLA or PETG with the large round end toward the print bed. Minimal cleanup even if printing…

Downloads
235
Likes
16
Rating
5
P
PrintablesPedroKV

Stand - holder - stojánek for Laica MD6026P

A stand to prevent the inhaler from tipping over. In order for the front foot of the inhaler to reach all the way to the bottom, use a hair dryer to soften the plastic a bit and shape it exactly when you put the inhaler on. Stojánek pro…

Downloads
231
Likes
8
Rating
4
P
Printablesmpizzaca

ULTIMEA Poseidon D60 Speaker Mount Hinge

Printed on Prusa MINI, 0.4mm nozzle, PETG, 0.20mm layer height, 15% infill, with supports

Downloads
225
Likes
15
Rating
0
P

Dübel d4 x D6 x 18_10 Stück

Dübel d4 x D6 x 18_10 Stück

Downloads
215
Likes
26
Rating
5

Packout Insert for Brother P-touch D610BT

I found that a Brother P-touch D610BT label maker (and possibly other similar models) fit nicely in a Milwaukee PACKOUT Compact Organizer (48-22-8435) but the TZ-e cartridges and other associated cables didn't fit very well so I modeled…

Downloads
210
Likes
53
Rating
5
P
Printables3DevLo

100 D6 12mm Box with dice tray

Keep your dice organized with this box that can hold 100 12mm D6. Printed in PLA, layer height 0.2mm, 4 walls, 10% infill, no support needed. You'll need 8 magnets to hold the lid with the base (6mmx3mm), that gives a strong closure. With…

Downloads
207
Likes
45
Rating
5
P
PrintablesPreischl 3D

Round D6 Dice Box Tower With Magnets

Round D6 Dice Box Tower With Magnets Hey maker! 👋 A small, practical D6 dice tower with a secure magnetic lid. Features: Designed for small D6 dice up to 1.25 cm edge length. Fits 5×5 mm round magnets for a snug and secure closure. Keeps…

Downloads
206
Likes
76
Rating
4.75
P
PrintablesThael

Sennheiser HD600 / HDxxx - closed back mod

Printed with 100% Infill ~ 60g ~ 6h sorry for the poor pic - changed some details on my printer and used really poor filament with very wild changing cross-section…. horrortrip xD I packed different insulations and stayed with the one in…

Downloads
204
Likes
28
Rating
5
P
PrintablesCobra5point0

FiFine Ampligame D6 Sliding Tiling Under Desk Mount

Pretty straight forward. Should be able to print without supports

Downloads
200
Likes
18
Rating
0
P
PrintablesParagon

Riden - RD6012 Case/Box

To download the box of my idea and project for the laboratory power supply riden rd6012, the box fits a dedicated 800W power supply NVVV, the top of the housing is folded out for quick access to the power supply. Box in two options,…

Downloads
198
Likes
16
Rating
0
P
PrintablesSenksis 3D

D6 on a chain bookmark

Be warned: This model with its print-in-place design can be a challenge to some printers. But you will be rewarded with an unusual bookmark. When in doubt, turn on the brim and z-hop. I've also added the individual elements in case you…

Downloads
196
Likes
47
Rating
5
P
PrintablesNoWayCall

D6 Parametric Magnetic Dice Box

Customizable D6 (16mm) Dice box with inserted magnets for magnetic closure. To change the number of dice: Fusion360 → Modify → modify parameters → "CubeNumber" (Note: If the box is way too long don't expect the magnets to hold up) To…

Downloads
192
Likes
26
Rating
5
P
PrintablesMarius Gaming

The MOAB from Bloons TD6

I made the moab from BTD6, it supports multicolored (even tho i just printed in one). I am fairly new to 3d printing so i dont have any advice, but i used these settings: Fist layer height 0,2mm, Layer height 0,1 mm, Infill 15, Wall loops…

Downloads
185
Likes
9
Rating
5
P

DnD - Magnetic HP Tracker & D6 Spell Tracker

Tired of Scribbling on a piece of paper whenever you heal or receive damage? Tired of taking notes for your Spellslots aswell!? Then look no further! The HP Tracker works with Magnets, so it turns smoothly and is replacable. you get to…

Downloads
185
Likes
86
Rating
0
P
PrintablesMyTechFun

Dual color D6 dice for multicolor 3D printing 20x20x20 mm cube

20mm D6 dice for dual color 3D printing. The body (you can print the body with single color too) and dots are separate files. Tested with BambuLab AMS and Sovol SV04. Instructions for slicers: PrusaSlicer: 1.) Import the body 2.) Right…

Downloads
181
Likes
5
Rating
5
P
Printablesnimbus510

Samsung Galaxy Z Fold6 Case

Because the case I preordered was taking way too long to show up, I decided to design my own! The back cover should hold well enough on its own, but I do recommend adding some sort of adhesive strips to hold the front cover in place (in…

Downloads
175
Likes
23
Rating
0
P
Printablessquirrelf3d

2510 fan clip for v6, revo, dragon, TD6

Easy to print, no print support Fan clip for 2510 fan M2.5x14 or M2.5x16 screws Fits v6 hotend and all derivative Not actually tested in practice regarding cooling capability, may want to consider installing it at a slightly lower point…

Downloads
173
Likes
14
Rating
5
P
PrintablesBike Cyclist

Ideal RPG/Wargame Dice (D12 on D60)

Ideal RPG/Wargame Dice Each time you need to roll "one more than before", it becomes more difficult by the same factor (133%), approximately. Great for sensible difficulty increases in RPGs and Wargames that use a lot of Die Modifiers…

Downloads
169
Likes
35
Rating
2
P
PrintablesHyness._.

Basic d6 Dice

Just a basic d6 dice. I printed with PLA

Downloads
168
Likes
21
Rating
5
P
Printablesyang li

D&D Dicetower D4-D6-D8-D10-D12-D30

D&D Dicetower D4-D6-D8-D10-D12-D30 The tested sieve is 12MM. It can smoothly place 10 sieves at a time without any lag. It needs to be printed on a 220*220 platform.

Downloads
165
Likes
55
Rating
0
P
PrintablesZusi

DnD Spell Slot Tracker for 12mm D6

Was looking for some spell tracking systems myself for our DnD 5e game and couldn't find anything that fit my needs. I decided to create something very simple & fitting for 12mm d6 (the standard d6 is 16mm) just to have less space…

Downloads
158
Likes
39
Rating
5

Handwheel for mini lathe MD65 (Proxxon SD300)

Die Minidrehmaschine Hobbymat MD65 (baugleich Proxxon SD300) hat keine Schloßmutter an der Z-Achse, sondern nur eine durchgehende Leitspindel mit 1mm Steigung. Um den Support zu verfahren muss ordentlich gekurbelt werden - das ist mit dem…

Downloads
156
Likes
14
Rating
0

Lying Pirates - Crew Dice - D6

Introducing the Crew Die for the board game ‘Lying Pirates’. These is the original, highly detailed model that was sent to the factory, boasting more intricacy than the dice in the final game due to production limitations Due to the level…

Downloads
152
Likes
22
Rating
0
P
Printableswuerfel

40d6 MTG Dice Box - Decksize

I built myself a suitcase to hold several of my decks. Thus I also made this dicebox to fit into the deckslots. It holds 40 d6. Outer dimensions 96mm x 69mm x 41mm It uses quadratic magnets 5mm x 5mm x 3mm. Or diameter 6mm x 3mm. The…

Downloads
149
Likes
42
Rating
0
P
PrintablesMehdals

Wooden D6 Dice

Wooden D6 Dice, 2 versions Pips and Numbers

Downloads
148
Likes
24
Rating
5
P
PrintablesAdam L

Customizable D6 dice holder (with Mushroom-Fitting Bonus Powers)

I designed this simple D6 (6-sided) dice holder to hold a standard set of 12x (16 in mm size) Chessex dice like those found here . Should work with most similar types of dice, as 16 mm is more or less the standard size for these types of…

Downloads
145
Likes
67
Rating
5
P
Printablessobieh

RIDEN RD6012 panel case

Riden power supply RD60xx panel case to keep your panel on your desk and hide the actual supply under your desk. Print best using PETG as PLA might get soft when it heats up. It's best to print it facing front of the panel (open wall)…

Downloads
145
Likes
18
Rating
4.5
P
PrintablesGeoff Williams

kd6102 case - "choppy"

This is a case for the "choppy" electronics kit available from jaycar: https://www.jaycar.com.au/5a-12vdc-pwm-motor-speed-controller-kit/p/KD6102 The instructions over at https://diyodemag.com/projects/choppy_the_pwm_maker mention some 3D…

Downloads
144
Likes
1
Rating
0
P
PrintablesSungo

6 in 1 Roulett Dice D20/D10/D8/D12/D6/D4

This is a Roulett Dice with 7 funktions, 6 different dice and it can be used als a coin. I used a 16mm ball bearing for the disk and m2x6 screws to join the two shells together. Because my Printer is not capable of printign this smal…

Downloads
144
Likes
27
Rating
0
P
Printablesnischno

Volador II (VD6) DJI O4 Camera Mount

Camera mount for DJI O4 Air Unit Pro in FlyFishRC Volador II (VD6) frame. Camera angle adjustable from ~5° to 25°. Replacement for the original CNC-parts of the Volador frame. Full camera protection at 25°, no part of camera protrude from…

Downloads
143
Likes
15
Rating
0
P
PrintablesEmil Saloheimo

Wanhao D6 (Duplicator 6) BambuLab hotend BondTech extruder rebuild

This is my attempt on making the printer head lighter and more precise. It utilizes a BambuLab hotend, or in my case a very good copy, and the BondTech extruder made for the Wanhao D6. Also remote cooling with CPAP-tube. My goal is to…

Downloads
140
Likes
19
Rating
5
P
PrintablesEastCoaster

3Racing Sakura D6 Upper Rear Mount - SAK-D626

UPDATE: I UPDATED THE HEAVY DUTY HD VERSION TO V4. IT HAS MORE SUPPORT MATERIAL AROUND THE MOUNTING HOLES. I'VE BEEN RUNNING V4 FOR WEEKS WITH NO ISSUES. This is a replacement for the 3Racing Sakura D6 Upper Rear Mount. SAK-D626 PRINT…

Downloads
139
Likes
6
Rating
0
P
PrintablesMZ4250

D6 Rogue

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
138
Likes
41
Rating
5
P
Printablesgirrisgod

D6 Gear Bearing Spinner

Gear bearing file I added numbers and an arrow to so you can spin some D6 action when your bored.

Downloads
137
Likes
10
Rating
5
P
Printableserelio_brolis

osVAC Adapter M32-M32-D60 Dewalt 7492

Good day, printhead's! Designed this for my workshop Dewalt DWE7492 power tool vacum connection. Also, because I use osVAC system all over the shop, added male end to both vacum connections. osVAC male ends M32 Dewalt outlet D60…

Downloads
135
Likes
17
Rating
0
P
Printablestechnogiraffe

Narcotics Anonymous (NA) D6

A six sided die, with the narcotics anonymous logo on the side holding the value of 6. Narcotics Anonymous logo Trademark owned by Narcotics Anonymous. This file is not licensed or endorsed by Narcotics Anonymous. Commentary: If printed…

Downloads
134
Likes
5
Rating
4
P
PrintablesVicki Marsh

Elgato HD60X Capture Card Desk/Table Holder/Mount

Attempting to tidy up my life and needed a little mount for the Elgato Capture card. Sleek design to ensure the unit sits flush with the front. Printing: Can be printed without supports Took around 60mins on Bambu Attaching: 4 countersunk…

Downloads
134
Likes
2
Rating
0

Index wheel for minilathe Hobbymat MD65 (and Proxxon SD300)

Inspiriert durch die Indexscheibe von Tony_G ( https://www.thingiverse.com/thing:726758 ) habe ich für meine Minidrehmaschine Hobbymat MD65 (baugleich mit Proxxon SD300) eine Indexscheibe mit 5 Grad-Einteilung konstruiert. Damit kann ich…

Downloads
131
Likes
20
Rating
0
P
PrintablesButchX

Sennheiser HD650 headband foam clips

designed for 0.25 nozzle printed without supports on prusa MK3s+ on 0.05 resolution Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.05 Infill: 100 Filament: Prusament PLA Galaxy Black Category:…

Downloads
131
Likes
6
Rating
5
P
PrintablesSaid

Rook Dragonburner Remix, TD6S & Orbiter 2

Remixed the Dragon burner to carry the Rook logo and remixed the Rapido HF mount to fit the TD6S. Dragonburner Mount it self is made by Gulsier. Dragon Burner Mount MGN9C for the Rook by Gulsifer | Download free STL model | Printables.com…

Downloads
131
Likes
25
Rating
5
P
PrintablesNikdfish

Housing for PD65W Fast Charging Module

This model is a housing for a PD65W Fast Charging Module that has a type-C USB interface that supports PD3.1 QC3.0 SCP PPS Fast Charger 5V 9V 12V 20V and DC input voltages from 8 to 32v. The circuit module is like these:…

Downloads
130
Likes
13
Rating
0
P
PrintablesCattus Printus

ES ceiling hanger bracket for CD60 profile leveling / poziomowanie wieszaków ES i profili CD

This is a tool that helps in leveling of suspended ceilings with CD60 profiles and direct hangers "ES". Should fit hangers of most brands. Slot was specifically enlarged to fit Norgips brand ES hangers. Includes custom *.3mf PrusaSlicer…

Downloads
130
Likes
11
Rating
5
P
Printablesborsic

d6 dice storage

I found myself in possession of 120 dice - here is a storage box. Just tip them in, they tend to self-organise with vigorous shaking. The lid is a tight fit to avoid the need for fasteners. Tested with Prusament PLA, .6 mm nozzle, .3 mm…

Downloads
130
Likes
22
Rating
5
P
PrintablesLazlo

Bloonarius (BTD6)

This is a slightly articulated model of bloonarius from btd6. There is a bevel gear mechanism that allows the propellers to spin in opposite directions (which is actually lore-wise incorrect but I think it's more interesting than…

Downloads
130
Likes
13
Rating
5
P
PrintablesAssaf

skadis WD40 bottle holder T clip (D67 mm)

67mm Version of the wonderful T clip version by @DJ_Designs that fits the WD40 can

Downloads
130
Likes
15
Rating
5
P
PrintablesManou

RD6012P case bench power supply style Owon XDM1041

part I used is: -3M bumper rubber feet -Pomona 2854-0 and -2 Banana Jack Connector -RD6012P (I haven't tested if other RD model fits) -One M2.5 countersunk screw I also made a single part variant

Downloads
129
Likes
24
Rating
5
P
PrintablesGaPa

Power RIDEN RD6012W

RIDEN® RD6012W USB WiFi DC-DC EPP-500-48 MEAN WELL - https://www.tme.eu/sk/details/epp-500-48/otvorene-zdroje/mean-well/ 4304.4023 SCHURTER - https://www.tme.eu/sk/details/4304.4023/konektory-iec-60320/schurter/ CP30090 CLIFF (only power…

Downloads
128
Likes
17
Rating
0
P
PrintablesHelgaiden

Fifine D6 Stream Controller and Elgato Stream Deck stand

Didn't like the integrated stand on the Fifine Ampligame D6 Stream Controller pad, so I found a Stream Deck specific stand and widened it to properly fit the Fifine. As a result, it still works with the regular Stream Deck (mk 1 or mk 2)…

Downloads
128
Likes
8
Rating
0
P
PrintablesWatersEdge07

D6-Based Spell Slot Tracker

A spell slot counter for tabletop RPGs that uses a six-sided die to track how many spell slots remain at each level. This is a remix - original design by kaleb hover. New numbering design makes spell level numbers more legible and better…

Downloads
124
Likes
21
Rating
3
P
PrintablesRoobotics

D6 Travel Dice Holder 12mm sized(screw mechanism tweak)

Ironing information: If you chose to do ironing, I'd strongly suggest NOT doing the default of “ All top surfaces” for the body portion and specify “ Topmost surface only ” The reason for this is you might experience a…

Downloads
124
Likes
9
Rating
0
P
PrintablesTheRadRomulan

Customizable D6 Holder (Multi-dice)

I want to use the Customizable D6 Holder by cdcrockett for wound counters in Age of Sigmar, but many of my units have more than 6 health. This is a modification to the aforementioned D6 Holder that adds support for 1-4 dice. Category: Dice

Downloads
121
Likes
8
Rating
5
P
PrintablesFernando Ortega

Bob and Brad D6 Pro Massage Gun Attachments

I've created new attachments for the Bob and Brad D6 PRO massage gun . If you're looking for an affordable yet high-quality massage gun, this is an excellent choice. You will need to use one of the rubber gaskets from the existing…

Downloads
120
Likes
9
Rating
0
P
PrintablesLippo

Braille DnD Dice Set (D4, D6, D8, D10, D12, D20)

This is a fully 3D-printable Braille DnD dice set, designed for blind and visually impaired players to enjoy tabletop role-playing games. Each die features raised Braille numbers alongside standard engraved numerals, making them…

Downloads
117
Likes
24
Rating
0