184 models
I constructed this board to hold the above mentioned controller for development purposes. The part was printed with PLA with a layer of 0.3 mm. Any other filament works too. No rocket science. Step file included. F360-file on request. The…
Print approx. €6.49–€7.93 excl. taxPreliminary estimate for one variant
Overview Simple one-sided center-loading spiral for 16mm film processing. Fits to the AP and Paterson tanks. Up to 1.7m film length Up to 3 spirals in the 2x135 tank 16mm, 110 Instamatic, 2x8mm film format 250ml working solution Printing…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
After paying a ton of money on chemicals it seemed really stupid to spend another 30€ on a simple plastic container. So I designed this fully 3D printed development tank. If you're cheap like me I guess you don't really need to develop…
DO NOT GLUE THE TOP FILM RETAINER It should be loose so you can slide film in/out. Use a dummy sheet of film to get the tolerances right before permanently gluing together. Open source with STEP files 26.02.23 Updated to v3 Light proof…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
Update 5-Jul-2021: Added a mid section to the 45 version as sometimes under heavy agitation the film edges will poke out the sides. ---------- Not blocking commercial on this one, and included the Fusion and Step files for you to improve…
Model dla zaawansowanych modelarzy w fazie rozwoju. "Case EZT EN57 CZŁON A" Model ze zdjęcia wykonany metodą druku FDM przeskalowany do 1:220 (skala Z) (plik stl. w skali TT 1:120) Materiał: PLA Zalecana dysza 0,25mm Człon silnikowy,…
this is a reupload of a design by mb_maker on thingiverse with a few alterations, it is an adaptable super 8, standard 8 and 16mm development tank. i have designed my own super 8 tank here :…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
I shoot and home-develop a lot of different film formats, and less-standard film development reels (like APS) are hard to come by, and expensive AF when they do creep onto the market. So.... I made my own. This one is designed to work in…
I designed this case for the "Lilygo T-Display-S3 Touch Development Board" which features a 320 by 170 color display and a touch screen. I'm planning on using this board in upcoming projects and decided to create this case for it. In…
See https://www.amazon.com/gp/product/B0811KLGDD/ref=ppx_yo_dt_b_search_asin_image
There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version UPDATE: I added tweaks 8, 9, & 10 described below, today (Nov 15, 2020) I shoot and home-develop a lot of…
ESP32 D1 Mini Case Click shuts nicely Easy print. Dimensions are in the pictures Check out my other stuff https://www.thingiverse.com/micahjj/designs Feedback and Makes I really like getting feedback and despite having thousands of…
An enclosure for the LILYGO Meshtastic T-Beam ESP32 TTGO Development Board with LCD and rear mounted 18650 battery mount. Requires four (4) 16mm M2 screws. OpenSCAD file requires BOSL2 (https://github.com/BelfrySCAD/BOSL2) and nutsnbolts…
This is a development stand and enclosure for the Arduino GIGA R1 WIFI and its GIGA Display Shield , based on the basic enclosure provided by Arduino themselves here on Printables . Although I think it is very clever that the GIGA Display…
For the Get creative with WAGO contest I thought it would be cool to have a case that houses a d1 mini esp8266 development board and Wago connectors to do the test setup instead of a breadboard. You need to print the following files:…
This Picatinny Receiver Development Kit is a CAD-ready model of a Picatinny-spec rail receiver that can be quickly adapted and customized to mount virtually anything to your blaster. The model isn't a usable tactical rail receiver without…
IMPORTANT! Watch the slicing tutorial if you do not have a dual extruder or something similar! Description Cards that are roughly the size of the original Settlers of Catan resource cards. The cards, when printed in PLA, feel and handle…
There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version I shoot and home-develop a lot of different film formats, and I found myself unsatisfied with the “solutions” I…
This is a case for the Heltec Wifi LoRa 32 (V2) development board ( https://heltec.org/project/wifi-lora-32/ ). I wanted to be able to have a case that can hold a lithium battery so this is what I came up with. I've included a version of…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for APS films, so I designed one. This is the result. Oh, and if you are looking at this, I'm sure you've realized that APS film…
[CZ] Upravený držák na DIN lišty ( https://www.thingiverse.com/thing:3433772 ) doplněný o úchyt tří komponent SIEMENS a tří 5mm led pro případnou indikaci stavu. [ENG] Modified holder for DIN rails (…
This is an enclosure case for the NodeMCU V3 development board and base. ESP8266 Development Board NodeMCU V3 can be found here: https://www.amazon.com/dp/B07DK2LRJJ/?coliid=I37O15QSY8H0VA&colid=1PKM0NV2CRFRC&psc=1&ref_=lv_ov_lig_dp_it
Fits two 830 point breadboards with spacing to allow an ESP32 dev board to span between them, solving the problem with those boards not fitting common breadboards with any points to spare. As designed it works perfectly for Elegoo brand…
MaciaT's developing tank worked really fine for me. It printed watertight in ABS+ without any acetone smoothing. But I had difficulties loading the film in the dark. A comparison to an old spiral showed that the grooves used to be much…
Remix of an Arduino Uno stand by tonyrod on thingiverse. I modded this years ago and figured I share here on Printables in case it was of use to anyone. License type matches license of original model
Mounting plates/covers for M5Stack Atom Lite ESP32 IoT Development Boards. I use these awesome little and cheap boards for measuring water levels in my tanks, light control, remote buttons and more! I couldn't find any covers. cases or…
I could not find a case that would fit my ESP32 that I found on Amazon, titled “HiLetgo ESP-WROOM-32 ESP32 ESP-32D Development Board” There was a model that said it did, but in fact it did not. Simple re-scaling just made new problems…
Printing with PLA is recommended for optimal strength. No supports needed. I also suggest printing 2 or 3 pieces with variant colors for different chemical substances (developer, stop bath and fixer) to avoid mixing chemicals.
I shoot and home-develop a lot of different film formats, and I found myself unsatisfied with the “solutions” I had for developing 110 film. I made a version specifically for my Jobo dev tanks, and got a lot of feedback from people asking…
| BASIC DESCRIPTION | development cards for the base game and seaferers expansion for the base game you need: 14 Knight cards 5 Victory Point cards 2 Year of Plenty 2 Monopoly 2 Road Building for the 5-6 players base game you need: 20…
this is a model to enable the home development of super 8 motion picture film. it holds a single cartridge (50 ft) of super 8 film emulsion side out in 3 layers. printed in transparent material enables fogging using LED strip lights…
Thanks to @FruitieX for the great original model. Modifications from their model: Resized the opening to work with the Added pass-through holes to allow wires to go under the gridfinity baseplate. Removed some extra features that were…
A 3D printable case for KIISU Development Board V4A by Rainwalker. A fun credit card sized development board that is compatible with Flipper Zero firmware and features some additional sensors and functions. Learn more about KIISU:…
Simple Model of the ESP-32 NodeMCU Developmentboard by AZ-Delivery. Can be used to get Placement of the USB-Port right.
A small thin case for for the Kiisu v4. See https://kiisu.io/ for more information about this board. less than 90 x 58 x 8 mm without the lanyard/keychain part Uses the acrylic piece that ships with the dev board No hardware, snaps…
我们使用高精度 3D 扫描仪对 CR-Scan Raptor 进行了细致的扫描，创建了精确的 3D 模型。此模型旨在帮助开发人员和工程师更好地设计和制造 CR-Scan Raptor 的各种配件。通过这个详细的 3D 模型，您可以彻底了解设备的各个方面，为配件开发提供坚实的基础。立即下载并开始您的创新之旅！
Development tank for large format sheet film 13 x 18 cm ( 13x18 ). Fits 8 sheets. Printed with PLA and then coated with epoxy, as liquids are poured in . The inside holder is intended also as a drying rack. Also I upgraded the inside…
Hello, I wanted a good fitting, vented FPV canopy to use on the Jumper Xiake 800 VTOL. I found some online, but decided to 3D scan mine and make an exact fit 3D model that could be used to add various styles/designs of cooling vents. I…
I needed a taller set than the previous, to allow for the longer ballistic tips. These are approximately ¾" taller.
I will continue to upload files as I modify the rest, howeveer for now it just has the buster sword. make sure you download the right files, they are named and made specifically
Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required. This case is made to fit the MH-ET LIVE ESP32 Development Board. https://www.aliexpress.com/item/32814642296.html?spm=a2g0s.9042311.0.0.27424c4dCeXuj0
Print without support. Box and lid
Case to hold your 3.5" TFT Arduino screen
If you search you can find a lot of development boards, but of course no one which combining Raspberry and Arduino and/or ESP32. Im using those boards, that s why Ive made my own board for Raspberry Pi, Pi Zero, Arduino Nano, ESP32 and…
There are as many cases as there are ESP32 derivatives it seems. Didn't see one I liked so made my own, inspired by Thomas V's https://www.printables.com/model/612413-esp32-case 2 versions, the newest looks the neatest but takes a little…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc, etc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
A compact tool designed to simplify loading 35mm film onto Paterson development spirals. Ensures smooth, frustration-free loading without damaging the film. Quick to print and easy to use—perfect for analog photographers!
Basic forms por babys. Make sure you use a suitable filament for babies and that your printer has no traces of other plastics. Category: Toys & Games
I streched the model for connecting the antenna
This is a quick holder I made for a couple of LED lights. It holds an ESP32 development board and a 5.5 x 2.1mm power barrel connector from Amazon to power LED ws2812b strip lights. I made it big enough to hold the ESP32, a barrel…
This is inspired by Gridfinity Generic DevBoard Holder . I didn't need the half grid base, which slows printing time, and the tallest bin there is 3 Gridfinity units, which doesn't work for boards that have stacking headers, or breakout…
Printed on Ender 3 Pro. Sliced in PrusaSlicer 2.6.0 Alpha6. I used organic supports. Infill pattern grid with 25% density. LCD: Brand: Waveshare SKU: 18625 Part Number: 7HP-CAPQLED
Prototype form my crane mount. Updates will be posted here.
This is a simple enclosure for a ESP32 and development board. It has a snap fit lid, And the board snaps into place. I made it to house my WLED controllers
Hello, I wanted a good fitting, vented FPV canopy to use on the Jumper Xiake 800 VTOL. I found some online, but decided to 3D scan mine and make an exact fit 3D model that could be used to add various styles/designs of cooling vents. This…
Use this mount to have your Nextion 3.5" display in an ergonomic orientation while developing your code. Support material not needed. Print it standing on its left side, and add brim is you want to be on the safe side. Clean the four…
I needed some cases for load development of my 6.5 Creedmoor, these are tight to stop them from falling out.
This little adapter lets you use an Altera chip socket for testing SNES CPUs and PPUs. Print with PLA to get a clean, precise component. PETG and ABS do not print cleanly enough for this as it is very specifically sized and shaped. The…
A development case for the RPi Pico for quick testing with loose wires. Files: PicoCase-*: Single material individual STLs. PicoCase_MM: Multi-part STL for multi color print. For PrusaSlicer: After the STL is opened→right click→split→To…
Introduction: This is the 'DumbBot', a 4 wheeled, Rear Wheel Differential Drive robot made for Artificial Intelligence (AI) applications. Inspired by the robots from the AI Tool Kit (AITK) this project seeks to implement a real-world…
This tray can hold all the development cards of one player. Update 08.10.2022: Added a new version that make it easier to grab and flip the tiny cards.
I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for Disc films, so I designed one that it working really well for me. This reel/holder is designed to hold up to three disc films…
I basically just took the original model and made it fit my larger antenna. After that I just kept making small changes until I was happy with it. Everything fits really well now and looks a little bit neater. I wanted something with the…
The Pico Development Board is used to bring all the components in your Pico/Circuit development into one place. This makes it easy to move you setup and not worry about all the individual components that are held together by just jumper…
a 3D printed TPU Pitot tube mount for a REMOVE BEFORE FLIGHT tag. I made this for my RC VTOL using Arduplane 4.3 Enjoy !, Dave
A 2 part shell style case for the flipper zero wifi development board. The tolerances are very tight, some mild post processing is to be expected primarily on the bottom half of the shell. Everything should fit nice and flush. Required…
Raspberry Pi Development Bench This model is a simple base plate designed to hold the Raspberry Pi 2,3,4 and two breadboards. It allows the developer to have a fixed station in which they can experiment and move around without having to…
Learn more about this project on the Github repo: https://github.com/qewer33/qpaperOS
The breadboards are sized 165x56mm and 84x55mm. The dc/dc converter is this one: http://www.amazon.de/gp/product/B07XJWSWKT Breakout boards are these:…
Scaled to fit a Stainless Steel Nikor Developing Tank. Push load type reel. Helps to taper film of feed end OTHER SIZES ARE HERE 110/16MM - https://www.thingiverse.com/thing:4831133 17.5MM HIT - https://www.thingiverse.com/thing:4831135…
You can print it while using PLA or PET-G doesn't matter too much. You will need 8x M2x5 screws to hold both arduino's Double sided tape to hold breadboard.
KickPi K2B Case w/ 40mm Fan This is a case for the KickPi K2B Development Board: https://www.kickpi.com/product/k2b/ which is available from Amazon here: https://a.co/d/7kwtqUZ (Price fluctuates. I bought mine @ $26.59 USD, FYI)…
The Hare Tech Diana 2025 Muzzle Development Kit contains CAD-ready models of threaded muzzles for the latest updated edition of Hare Tech Diana Brushless Flywheeler. The model isn't necessarily a usable muzzle without modification, but it…
Started with Spiritdude's case design, lengthened it and moved the usb port to align. Print Settings Printer Brand: Anycubic Printer: Large Size Chiron Rafts: No Supports: Yes Resolution: .016 Infill: 20 Filament: IIID PLA+ White…
Nucleus Development Hive This project was created to develop a small hive specifically intended for the development and growth of a bee colony. The hive has been designed for 3D printing and, in the main version, makes use of practically…
Summary This is a case for a EC Buying STM32H7 development board. The part number on board is FK723M1-ZGT6 V1.0. Purchased Parts The board was purchased from Amazon , but looks to be available on AliExpress, etc. as well. Qty 4 - M3.0x6mm…
No special print settings required
For use 7.5 inch e-ink display made by WAVE SHARE. Ultra simple and easy to use. No glue needed. Easy to assemble and disassemble. I recommend using this for development. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No…
I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for Disc films, so I designed one that it working really well for me. This reel/holder is designed to hold up to three disc films…
Spring Generator especially sim racing pedals. Print with support. I recommend PETG filament for durability and flexibility. You can adjust, thickness, density, radius, height etc.
This is a cube that is currently in development, I would like feedback on how to improve the design. I plan to make this open source to the community once development is finished, so your help would be greatly appreciated. It is working…
Just a basic bottom cover for ESP32-C3 for development extension board to protect both your table from scratches and your board from shot circuits in case of occasional touch with metal or any other conductive surface. See also other…
I was hacking a Halloween decoration and needed a way to mount a TinyS3 as double sided tape wasn't cutting it. Insert the board under the clips on the USB side and then snap down on the antenna side to secure the board. This may also…
https://cad.onshape.com/documents/dff0a0ab8504a64952909e86/w/279a00eb4bf456745123b855/e/f8b8ea266391a291eca15c8b?renderMode=0&uiState=69a44cd18d82e5f4f306b781
Compact case for the AZ-Delivery ESP32-WROOM-32 Development Board . The case was designed and tested with the USB-C version shown in the pictures. The older Micro-USB version appears to have the same board dimensions and should fit as…
Update: New Adjustable holder to fit all kids of boards are in the files! not required but recommend a rubber band around the adjustable holders to help with placement( shown in photos) Currently working on holders to fit other…
This machine is designed for Jobo 1520 film development tanks. Additionally to the printed parts you need: 1x power supply - 24V / 6A (or what your motor needs) 1x nema 23 stepper Motor 3nm 1x nema 23 motor l-mount 1x motor mount 8mm 1x…
Zentralrohr als Ersatzteil für den Paterson Entwicklungstank mit zwei oder drei Spulen. An der Unterseite ist Stützmaterial erforderlich. Die zwei Mitnehmerlappen im inneren des Rohres erfordern kein Stützmaterial. Achtung! Darauf achten,…
Lost the clamp for my Jobo 1136 tank. This one will also fit on the larger Jobo 2000 systems. It's needed for fastening the spiral sets on the central tube.
I updated this per request of a Printables member for .270 WIN. I designed this for my 6.5 Creedmoor, but it will fit many cartridges with a head diameter of 0.473" (12.04mm). It is designed for the projectile pointing down, into the…
esp32-s3-touch-lcd-1.85c-box holder
I bought, on Aliexpress, an Development Bomodules for my Flipper Zero but I was unable to find a 3d case... so I made on
Mount for the X86-P5 development board with the 4x 4*M2 nvme expansion board . Space/clearance for air to travel around the nvme. Use four m2x12 countersunk screws to screw into the pre-existing holes in the heatsink. Print in PETG, 4…
KIISU Development Board v4a Mockup for addon and accessory design Learn more: https://kiisu.io ___ Follow on Social Media @planmarks Website: https://planmarks.eu Support by PayPal…
This Picatinny Rail Seed Development Kit is a CAD-ready model of Picatinny-spec rail that can be quickly adapted and customized to virtually any length or style. The model isn't a usable tactical rail without modification, but it…
KIISU 8Bit Keychain Learn more about KIISU: https://kiisu.io For commercial use: Cults3D ___ Follow on Social Media @planmarks Website: https://planmarks.eu Support by PayPal https://www.paypal.com/donate/?hosted_button_id=EA4R2NXW5LM7E…
![Spring Generator [UNDER DEVELOPMENT]](https://media.printables.com/media/prints/1132850/images/8546451_37a82912-1e73-40af-acc4-e20e96970885_9653d52e-eeda-4d92-8454-4cfc79dab171/screenshot-2025-01-03-201405.png)
