Search results: dh

Sort order

4,466 models

P
PrintablesR3D

Combined First Layer + Adhesion Test

The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…

Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant

Downloads
5,123
Likes
119
Rating
5
P
PrintablesAndiY82

Einhell Akku Wandhalterung

Einhell Akku Wandhalterung

Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,795
Likes
191
Rating
4.96
P
PrintablesBombastus Hands

3 cute litte Buddha figures - smoothed

Update 2024 April There are two new G-Code files. First of all they now have the seam on the back. Also I added one with 0,1 mm layers so you have that at hand. Also while being at it I fixed the bases of the models, all STLs now have a…

Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant

Downloads
1,467
Likes
209
Rating
4.71
P
PrintablesLeehound

Traditional Birdhouse

Check out my newest birdhouse, No Glue Required: https://www.printables.com/model/1625774-rustic-birdhouse This is a glue together birdhouse comprised of 7 pieces. Each glue joint is clearly defined with an indentation or V groove (for…

Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant

Downloads
1,409
Likes
280
Rating
4.93
P
PrintablesJakub Kočí

Birdhouses

ENG Full article: https://blog.prusaprinters.org/ how-to-print-for-animals_46054 / Assembly and recommendations: All boxes are easy to assemble: simply use a piece of filament for hinges and M3 screws for securing the lid. Do not expose…

Print approx. €4.72–€5.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,391
Likes
439
Rating
4.9
P
PrintablesHydrotatic

2in1 Cardholder Carry & Display

* v.2.1 made slot support thicker so it doesn't break anymore, requires a little more force to go together but its much stronger. *v.2 Changed dimension to fit Creditcards and can be used as a wallet Perfect for professionals,…

Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant

Downloads
1,165
Likes
324
Rating
4
P
PrintablesStaubi

Makita DUR181 (Z) Wandhalterung (wall mount)

Eine Wand Halterung für den Makita Akku-Rasentrimmer DUR181 . Präsentiere stolz deine maßgefertigte Wandhalterung für den Makita Akku-Rasentrimmer DUR181! Diese elegante Halterung wurde mit PETG-Material gedruckt und verfügt über eine…

Print approx. €5.70–€6.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
977
Likes
96
Rating
5
P
PrintablesKlaus

Wall mount for type 2 plug and Juice Booster 2 (electro mobility) - Wandhalterung für Typ 2 Stecker und Juice Booster 2 (Elektromobilität)

You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…

Print approx. €6.62–€8.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
974
Likes
71
Rating
4.82
P
PrintablesAndiY82

Festool Akku Wandhalterung

Festool Akku Wandhalterung

Print approx. €6.15–€7.52 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
566
Likes
104
Rating
5
P
Printablesi5cemi

Wandhalterung Remote Fire TV Sprachfernbedienung Pro

Wandhalterung Remote Fire TV Sprachfernbedienung Pro. Sie unterscheidet sich leider von der Form zur “normalen” Fernbedienung. Wert wurde auf abgerundete Kanten und tief sitzende Schrauben gelegt um ein verkratzen der Fernbedienung zu…

Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant

Downloads
396
Likes
11
Rating
5
P
PrintablesBayerwald

Stihl Motorsägenhalter / Kettensägenhalter Wandhalterung

Ein Model zum Aufhängen der Stihl Motorsäge an der Wand Material: PLA Füllung: 15% (Gyroid) Schichtdicke: 0,2mm Getestet bei der Stihl MS 171, MS 241, MS 661

Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant

Downloads
367
Likes
23
Rating
4.67
P
PrintablesBombastus Hands

3 cute litte Buddha figures - Low Poly

Update 2024 April There are two new G-Code files. First of all they now have the seam on the back. Also I added one with 0,1 mm layers so you have that at hand. Also while being at it I fixed the bases of the models, all STLs now have a…

Print approx. €4.15–€5.07 excl. taxPreliminary estimate for one variant

Downloads
309
Likes
29
Rating
0
P
Printablespatrickzell

Wall mounting bracket for Xiaomi Mijia Bluetooth Thermometer Hygrometer (Wandhalterung)

Für den Xiaomi Mijia Bluetooth Thermomether/Hygrometer habe ich eine Wandhalterung konstruiert. Da dem Gerät nur ein doppelseitiges Klebepad beiliegt und keine weiteren Befestigungsmöglichkeiten vorgesehen sind, könnte es bei einem…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant

Downloads
289
Likes
32
Rating
5
P
PrintablesMacuma

Lego Porsche 911 RSR 42096 Wandhalterung / wall mount

Ich habe hier eine Wandhalterung für Lego Porsche 911 RSR 42096 erstellt. Das Modell ist etwas geneigt und lässt sich drehen. Ich habe 4x Schrauben 4,5 x 50 verwendet. Es sieht aus als wenn er schwebt. I have created a wall mount for Lego…

Print approx. €24.27–€29.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
272
Likes
44
Rating
0
P
Printablesarnevollstedt

Warmluftauslass Standheizung VW California T5/T6 für bessere Luftverteilung

Im VW California bläst die Warmluft der Raumheizung aus einem Lüftungsgitter an der B-Säule unten. Das original Lüftungsgitter hat die Lamellen nach unten ausgerichtet, so dass sich die warme Luft schlecht im Bus verteilt. Bei diesem…

Print approx. €9.96–€12.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
249
Likes
22
Rating
0
P
PrintablesKlaus

Einhell Agillo Cordless Scythe wall mount / Wandhalterung Akku Motorsense

This wall mount is designed for Einhell Agillo 36/255 and the original accessories and tools, but may also fit for other scythes. I used PETG, 3 perimeters and 0,2 layer height. Happy printing!

Print approx. €7.76–€9.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
238
Likes
24
Rating
5
P
PrintablesMatthias

Druckluftschlauch-Wandhalterung - Compressed air hose wallmount

Benötigt werden: 3x Wanddübel für 4er oder 4,5er Spax-Schrauben 3x Schrauben M5x10mm mit Flachkopf 3x Muttern M5 2x Kabelbinder klein Muttern M5 von hinten in die Wandplatte einsetzen Schraubenlöcher bohren und Wandplatte befestigen…

Print approx. €8.84–€10.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
232
Likes
34
Rating
5
P
PrintablesAllpa

Universal dual Smartphone wall mount / Universelle Doppel-Handy-Wandhalterung

Universal holder for two cell phones. Ideal for placing above a power outlet while charging. Simple and flat design with a recess on the back for mounting with double-sided adhesive tape (e.g.: https://amzn.to/3Zt05iO). Two versions are…

Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant

Downloads
229
Likes
36
Rating
5
P
PrintablesObe_Design

Brick Line / Cord Holder - No Screws or Adhesives

A simple and practical brick line holder that stays in place using the tension of the brick line itself — no screws, nails, or adhesives required.Perfect for masons, DIYers, or anyone needing to stretch a straight line when working with…

Print approx. €1.09–€1.34 excl. taxPreliminary estimate for one variant

Downloads
224
Likes
34
Rating
0
P
PrintablesOMH

ID CardHolder

This is a remix of a clean and simple design by Chrismettal - Binary-6. I tweaked a few things to help it better suit my purpose: I extended the top portion so that you can add text like your name, office #, etc. above the card itself…

Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant

Downloads
210
Likes
24
Rating
5
P
PrintablesStefan Skotty

Toilettenpapier Wandhalterung Badezimmer Wandmontage

Der Druck besteht aus zwei Teilen. Die Halterung Die Stange zum Abrollen Die Stange lässt sich ohne Kraft in die Vorrichtung legen, da sie etwas Spiel hat.

Print approx. €2.13–€2.60 excl. taxPreliminary estimate for one variant

Downloads
200
Likes
51
Rating
0
P
PrintablesPreischl 3D

Cable Wall Clip self-adhesive

Self-Adhesive Cable Wall Clip Hey maker! 👋 Keep your cables tidy without buying huge packs from the DIY store. Features: Simple, fast-to-print design using minimal material. Easy to remove cables when needed. Can be scaled for different…

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant

Downloads
199
Likes
41
Rating
5
P
PrintablesHenk

Improved Small sanding or polishing disk for a handheld drill

This design is a further development of my model 646358. Sometimes I need to sand or polish a small area. I don't like to prepare then my belt or vibration sanders. That is why I designed this very simple flexible disk to be used by a…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
198
Likes
91
Rating
5
P
Printablestom

Wandhalterung für eine Leiter/ Wall bracket for a ladder

Dies sind zwei sehr stabile Halterungen, um eine Leiter an der Wand aufzuhängen. Eine Halterung ist innen ca. 120mm, die andere 140mm lang. Die Befestigungsbohrungen sind ausgelegt für 4mm Senkkopfschrauben. Translation: DeepL These are…

Print approx. €5.95–€7.28 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
193
Likes
19
Rating
5
P
PrintablesAlvomane

IKEA Samla 22L box wall bracket | IKEA Samla 22L Box Wandhalterung

This is a sturdy wall bracket for hanging an Ikea Samla 22L box securely on the wall. The box is hooked onto the top and the square feet at the bottom at the same time. The box can be easily positioned along the bevelled bracket and hung…

Print approx. €6.41–€7.83 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
189
Likes
57
Rating
5
P

Wandhalterung für Steckdosen

Halter für eine Steckdose mit Einzelschalter. Innenmaße (für Steckdosenleiste) : Breite: 74mm Höhe: 42mm Wanddicke: 5mm

Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant

Downloads
173
Likes
11
Rating
0
P
PrintablesPoke2

Wandhalterung SwitchBot Outdoor Meter / Wall mount SwitchBot Outdoor Meter

Wandhalterung kann mit 2x 3mm Senkkopfschrauben einfach befestigt werden. Ich habe beim Druck organic Support verwendet. Geht aber auch ohne, dann sind die Bögen auf der Unterseite bisschen unsauber, aber nicht schlimm. Wall bracket can…

Print approx. €1.00–€1.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
169
Likes
26
Rating
5
P
PrintablesOtty_Skipper

Bunny Buddha "Buddhy"

This is a remix of the Laughing Buddha with bunny model the company extrudr made for easter. The details of the model have been sligthly resculpted for enhanced looks. I was looking for a funny and decorative Easter surprise, after some…

Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant

Downloads
161
Likes
36
Rating
5
P
PrintablesMVLPGaming

Wall Mount for Comelit Quadra / Wandhalterung für Comelit Quarda

Wandhalterung für die Türstation Quadra der Firma Comelit. Die Halterung wurde mit folgende Einstellungen gedruckt: Layerhight: 0,2mm Infill: 10% Walllines: 4 Filament: Silver PLA

Print approx. €8.70–€10.64 excl. taxPreliminary estimate for one variant

Downloads
158
Likes
7
Rating
0
P
PrintablesHenk

Small sanding or polishing disk for a handheld drill

Sometimes I need to sand or polish a small area. I don't like to prepare then my belt or vibration sanders. That is why I designed this very simple flexible disk to be used by a handheld battery drill or screwdriver. It will accept…

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant

Downloads
156
Likes
75
Rating
0
P
PrintablesPawel

Handy Wandhalterung

Handy Wandhalterung für Samsung A70. Kabelkanal für original lade Kabel zum verlegen und fixieren. Halterung hat zwei Löcher für 10-er schrauben.

Print approx. €2.66–€3.25 excl. taxPreliminary estimate for one variant

Downloads
150
Likes
5
Rating
0
P
PrintablesKlausKoeln

Fahrradhalter für Garmin Etrex30 Navi

Universal Garmin Navi Halter besonders für Etrex 30 und kompatible Modelle. Die Befestigung erfolgt mit einem Velcroband - passt also auf alle Fahrradlenker.

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant

Downloads
148
Likes
28
Rating
0
P
PrintablesUM3D

Wall hooks, Coat hooks, Kleiderhaken, Wandhaken

Installation recommendation: When attaching the caps, pay attention to the two guides in the connectors. The guides and the angular fixing piece the alignment of the individual parts is always guaranteed. The hooks can also be used…

Print approx. €1.41–€1.72 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
141
Likes
20
Rating
5
P
PrintablesSquadLeader70

Mudhorn Signet Keychain (Small Mandalorian spoiler)

The Mudhorn signet that the Mandalorian wears on his right shoulder pauldron. You can use a thin string, some 3mm thick filament, or a ball chain string thing.

Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant

Downloads
129
Likes
24
Rating
0
P
PrintablesMLS

Wandhalter für Messschieber / Calliper Wall Support

Wandhalter für 2 Messschieber / Wall Support for 2 calliper

Print approx. €4.37–€5.34 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
127
Likes
13
Rating
0
P

Kabelwanddhalter (Wallmount Cabel Holder/Hook)

Wandhalter für Kabel und Schläuche in verschiedenen Größen (50x50, 80x80 und 50x80) und mit verschiedenen Befestigungsbohrungen (Version X.0 mit Flachsenkungen (z.B für Linsenkopfschrauben) und die Version X.1 mit Kegelsenkungen (z.B. für…

Print approx. €4.40–€5.38 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
120
Likes
16
Rating
5
P
Printablespatrickzell

Wallmount for HAZET Torquetool / Wandhalterung für Drehmomentschlüssel

Wallmount for HAZET Torquetool / Wandhalterung für Drehmomentschlüssel Parametric design

Print approx. €1.08–€1.32 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
109
Likes
22
Rating
5
P
Printables3D Druck Profi

Wandhaken

Der Wandhaken kann an der Wand oder anderen Gegenständen befestigt werden, damit man Ordnung hat. Es können zum Beispiel Schlüssel, Taschen und sonstiges aufgehangen werden.

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant

Downloads
99
Likes
6
Rating
0
P
PrintablesKevin

Wandhalterung Schallplatten Haken multifunktion

Wandhalterung für Schallplatten, auch für andere Gegenstände nutzbar. Supports needed!

Print approx. €3.31–€4.04 excl. taxPreliminary estimate for one variant

Downloads
97
Likes
6
Rating
0
P
PrintablesBruce

Tablet Wandhalterung A7

Wandhalterung für das Tablet A7

Print approx. €2.67–€3.27 excl. taxPreliminary estimate for one variant

Downloads
95
Likes
4
Rating
5
P
Printablesciccio3D

Root Chakra (Muladhara)

Root Chakra symbol

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
93
Likes
16
Rating
5
P
PrintablesHobbydrucker

Lenkachsensteuerung für Carson Goldhofer (1:14) über Lenkkeil V2.0

Dieses Modell dient dazu, mittels des Lenkkeils und der drehbaren Platte den Lenkwinkel zwischen Sattelzugmaschine und dem Goldhofer Sattelanhänger an das Linearpotentiometer von HAMAtronic an die entsprechende Elektronik zu übertragen.…

Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant

Downloads
81
Likes
4
Rating
0
P
Printablesciccio3D

Sacral Chakra (Swadhisthana)

Sacral Chakra symbol

Print approx. €0.29–€0.36 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
78
Likes
12
Rating
5
P
PrintablesMichal K

SWEDISH BIRDHOUSE walls to fit smaller printers

I was not able to print the walls parts on my Prusa MK3S+ . The original author, PurchenZuPoden was so nice that he has included the STP files, so after few minutes in CATIA the walls separation was done. No need to glue all the parts…

Print approx. €0.78–€0.95 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
76
Likes
14
Rating
5
P
PrintablesAA

Wallmount for Spoolholder X2 (up to 4kg Spools) - Wandhalterung für Filamenthalter X2 (bis 4kg Spulen)

Wallmount for Spoolholder X2 The wall mount for the filament spool holder X2 can hold filament spools up to 4kg (or generally spools with a diameter of up to 36cm. With the spacers L, M and S, the distances for the different axes of the…

Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
74
Likes
6
Rating
5
P
PrintablesAnthem212

Beerholder - Drinkholder Foldable Wallmount / Bierhalter - Faltbar, Wandhalterung

A amazing Beerholder to screw in the wall. If you need a beerholder - fold it down ant put your drink in. When you finished push it back up. I have it in my livingroom because we often have visitros to watch a movie together. No where to…

Print approx. €7.76–€9.49 excl. taxPreliminary estimate for one variant

Downloads
71
Likes
6
Rating
0

Adhesive base for cable ties

This is an adhesive base for cable ties, with a base plate of 20mm by 20mm

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant

Downloads
71
Likes
7
Rating
5
P
PrintablesAirconTechnik

Wandhalterung für Faszienrolle "Blackroll"

Halterung für die Standard-Blackroll

Print approx. €3.86–€4.72 excl. taxPreliminary estimate for one variant

Downloads
65
Likes
9
Rating
5
P
Printables3D Druck Profi

Wandhaken/ Hook

Der Haken kann an der Wand befestigt werden. Er kann für Handtücher, Taschen oder Kabel verwendet werden. The hook can be attached to the wall. It can be used for towels, bags or cables.

Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
4
Rating
5
P
PrintablesFabTech

Blow your friends away with this 18650 battery powered handheld fan!

This fan runs on dual 18650 batteries. The necked down nozzle design increases air velocity for optimal cooling. Bill of materials: Bottom cap contact spring: https://a.co/d/hnrPVWE Sliding Switch: https://a.co/d/9z3JiiK Spring contacts:…

Print approx. €4.53–€5.54 excl. taxPreliminary estimate for one variant

Downloads
63
Likes
30
Rating
0
P
PrintablesHobbydrucker

Servoholder for Carson Goldhofer 1:14 Trailer

Servoaufnahme, um einen Standardservo zur Ansteuerung der meiner Lenkachsen aufzunehmen. Er wird hinten durch die ersten Anlenkungen der Achsen fixiert, vorne sind zwei Bohungen im Rahmen des Goldhofer erforderlich. Damit wird zugleich…

Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant

Downloads
62
Likes
8
Rating
0
P
PrintablesMukluk Actual

Gridfinity Holder for Magigoo 3D Printing Adhesive

Printed in PLA, didn't use supports.

Downloads
57
Likes
6
Rating
5
P
PrintablesNozzle

Wandhalter für Leiter Ladder bracket

ZUm Zusammenbau werden M6 er Schrauben benötigt. Sehr stabile Konstruktion.

Print approx. €3.01–€3.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
55
Likes
6
Rating
0
P
PrintablesHobbydrucker

Carson Goldhofer 1:14 Battery Holder with top - Akkuhalter

Akkubox für Goldhofer Sattelauflieger mit Deckel im Maßstab 1:14 zur Aufnahme eines Standardakkus, Zusätzliche Aufnahme für eine Servonaut-AMO-Elektronik. Der Deckel wird mit Neodym-Magneten (5 x 3) gehalten. Dafür ist in der Akkuwanne…

Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant

Downloads
55
Likes
6
Rating
0
P
PrintablesHobbydrucker

Lenkachsensteuerung für Carson Goldhofer (1:14) über drehbaren Lenkkeil mit Kugellager V1.0

Dieses Modell dient dazu, mittels des Lenkkeils und der drehbaren Platte den Lenkwinkel zwischen Sattelzugmaschine und dem Goldhofer Sattelanhänger an das Linearpotentiometer von HAMAtronic an die entsprechende Elektronik zu übertragen.…

Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant

Downloads
53
Likes
5
Rating
0
P
Printablesswablab e.V.

BlackDog boardgame cardholder

A cardholder for the boardgame Blackdog. Just replace the middle clip of the game board and use the new one, with the cardholder above. In newer versions of the game, the turntable is screwed. Just dismount the circle and install the card…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
48
Likes
4
Rating
0
P
PrintablesWillis Works

Bondhus Metric and SAE Hex Set Pegboard Hooks

A satisfying snap for your Bondhus Hex wrench sets. Pivot case in out our for easy removal. For standard 1" pegboard

Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant

Downloads
47
Likes
17
Rating
5
P
Printables3D-Print Brehm

Filament-Wandhalter für zwei offene Rollen

Wie immer viel Spaß beim Nachdrucken und denkt mir an die Bewertung oder euer Feedback - besten Dank und Gruß

Print approx. €12.15–€14.85 excl. taxPreliminary estimate for one variant

Downloads
45
Likes
2
Rating
0
P
PrintablesCurtAssWil

Groundhog Stake Pusher

Remix of @lukfilipsk stake pusher.

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
45
Likes
5
Rating
0
P
PrintablesFlo

Clamp for Proxxon handheld tools / Spannvorrichtung für Proxxongeräte

With this clamp, Proxxon and all other tools with a maximum diameter of 35 mm and a clamping diameter of 20 mm can be clamped in vices and with an additional clamp on the table. An M5x30 bolt and an M5 nut are also required. Link for an…

Print approx. €3.80–€4.65 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
44
Likes
6
Rating
0
P
PrintablesBiofreak

Canvas holder hook Leinwandhalter für Wand

I wanted to mount a canvas picture on the wall. The problem was that I had no hooks and also wanted to avoid damaging the canvas. Nails for example could intrude from the back… So here is the canvas holder! Available in different…

Print approx. €0.40–€0.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
42
Likes
3
Rating
0
P
PrintablesPeter Farell

Gadhaiya Paisa Coin

The Gadhaiya Paisa is a fascinating silver bullion coin from the Chaulukya dynasty, which ruled parts of north-western India from around 543 to 753 AD1. The name "Gadhaiya" is attributed to the Indo-Sassanian dynasties and their…

Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant

Downloads
34
Likes
9
Rating
5
P
Printablesc-arts-modelle

Console for handheld RC transmitters

Transmitter console The transmitter console consists of several 3D printed parts that are glued together with epoxy resin. It is made to be used with a variety of handheld transmitters. With an optional extension, the console can be…

Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
34
Likes
3
Rating
0
P
PrintablesRayvenJ12

Handheld Stand

I created this to hold my switch, steam deck, Odin2, and other handheld devices on my behind couch shelf. It holds either 5 or 7 devices up to 1.6" thick, and fits on a shelf or desk at least 11 ¾" deep for the 7 device file and 5.9" for…

Print approx. €24.06–€29.40 excl. taxPreliminary estimate for one variant

Downloads
32
Likes
5
Rating
0
P
PrintablesZamnDan

Handheld Air Duster and Parts Holder (15 and 30 mm desk)

This is a flush mounted holder for your average handheld air duster. it includes a holder for each additional part as well. it has a locking mechanism for the duster to ensure it is oriented in only one direction. I included a back tap…

Print approx. €4.17–€5.10 excl. taxPreliminary estimate for one variant

Downloads
31
Likes
1
Rating
0
P
PrintablesDavid Quinot

boudha arbre de vie porte bijou

après impression chauffer légèrement les crochets pour les tordre légèrement

Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
6
Rating
0
P
PrintablesAWachert

ePowerFun ePF-2 Power Supply Wallmount / ePowerFun ePF-2 Netzteil Wandhalterung

German ePowerFun ePF-2 Netzteil Wandhalterung inkl. Steckerhalter. Die Schraublöcher mit Senkung dienen der perfekten Montage an der Wand. Durch die angewinkelte Konstruktion lässt sich die LED Ladeanzeige auch von oben ablesen ohne das…

Print approx. €5.63–€6.88 excl. taxPreliminary estimate for one variant

Downloads
30
Likes
2
Rating
0
P
PrintablesSteffen

Dahua DH-IPC-HDW3841EMP-AS

Dahua DH-IPC-HDW3841EMP-AS

Print approx. €5.05–€6.17 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26
Likes
0
Rating
0
P
PrintablesPeter Larsen

Rødhals

3DE PLA Sun Yellow 3DE PLA Silky Silver 3DE PLA Matt Midnight Black 3DE PLA Leather Brown 3DE PLA Chokolate Brown 3DE PLA Max Flame Orange/ True Orange 3DE PLA Matt Ghost White 3DE PLA Silky Green

Print approx. €7.66–€9.36 excl. taxPreliminary estimate for one variant

Downloads
25
Likes
10
Rating
0
P
Printables3DFW

Birdhouse Gadget Cache – Hidden Nail Puzzle with Decoy Hardware

This tricky birdhouse gadget cache is designed for one of our personal geocache hides, but it can easily be adapted for your own creative setups. It combines a visual red herring with a clever magnetic/nail-based locking mechanism, ideal…

Print approx. €2.32–€2.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
6
Rating
0
P
PrintablesPeter Farell

Seated Sadhguru

Seated Sadhguru

Print approx. €4.01–€4.90 excl. taxPreliminary estimate for one variant

Downloads
18
Likes
7
Rating
0
P
Printablestom

Wandhalterung für 2 Stück Mehrzwecktisch 100 x 60 cm/ Wall mount for 2 pieces multi-purpose table

Mit diesen stabilen Wandhalterungen können zwei Mehrzwecktische platzsparend und sicher aufbewahrt werden. Die Tische werden auf die Halterungen gesteckt, wobei die Sicherungen ein Herunterfallen verhindern. Die Befestigungsbohrungen sind…

Print approx. €5.64–€6.90 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
18
Likes
1
Rating
0
P
PrintablesPeopleware

Wall Bracket/Wandhalter for razor/Rasierer PHILIPS OneBlade 360 Face & Body

Den Wandhalter gibt es mit Kamm-Fach oder auch ohne Kamm-Fach Ich bevorzuge die Rasur ohne die mitgelieferten “Abstandshalter” und nutze stattdessen einen speziellen Kamm, wie auch mein Friseur, daher habe ich dafür einen Platz…

Print approx. €0.88–€1.08 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
17
Likes
6
Rating
0
P
PrintablesKnife-Reaper

Stretchfolien Rollen Handhalter / Stretch film roll hand holder

Stretchfolien Rollen Handhalter für Rollen mit 38mm Kerndurchmesser und einer Länge bis zu 140mm. Stretch film roll holder for rolls with a 38 mm core diameter and a length of up to 140 mm. Default print profile 0.2 mm, 10% Gyroid infill,…

Print approx. €3.79–€4.63 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
7
Rating
0

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
13
Likes
5
Rating
0

IKEA CHOKLADHAJ box/tray with handle

Simple IKEA CHOKLADHAJ box/tray design concept built in TinkerCAD. Used to carry around stuff in the house while cleaning / dusting the furniture, desk, shelves, etc. I used Prusament WoodFill PLA at my girlfriend's request, to mirror the…

Print approx. €13.90–€16.99 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
2
Rating
0
P
PrintablesTruchsess

Wandhalter für Arbeitsmesser

Inspiriert durch die Wandhalterung für das Wera-Tool (teslapunk) habe ich diese kleine Halterung für mein KWB-Arbeitsmesser gemacht. Jedes andere Fabrikat mit gleicher Größe und Metall-Gürtelclip sollte auch passen.

Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
0
Rating
0
P
PrintablesDvG3DAtelier

Wallmount Speedmarker Lets Bastel Create - Improved handling / verbesserte Handhabung

The added cutout makes it easier to remove the Speedmarker from the holder without risking damage to the plastic knurled

Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
12
Likes
1
Rating
0
P
PrintablesSimonFuVo

Wandhaken Aufhänger Duschschwamm

Halter / Haken für Duschschwämme oder ähnliches. kann mit Doppelseitigem Klebeband befestigt werden. Größe: Breite 15mm Tiefe: 20mm Höhe: 40mm Druckeinstellung: 0,4 mm Düse 0,15 bis 0,2mm Schichthöhe 15% Infill

Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
0
Rating
0
P
PrintablesDikFrik2504

MasterChef Handheld Blender Bracket

WHAT IS IT This is a wall mounted bracket for the MasterChef handheld blender. If you want to remove the blender from the bracket push it up slightly and pull it so the it comes out of the seat and reverse the process to reinsert it after…

Print approx. €3.60–€4.40 excl. taxPreliminary estimate for one variant

Downloads
12
Likes
1
Rating
0
P
Printablespallram1988

Wandhaken (Hook)

Wanhaken mit versteckten Montagebohrungen

Print approx. €6.17–€7.54 excl. taxPreliminary estimate for one variant

Downloads
11
Likes
2
Rating
0
P
PrintablesStudi_Ha

Wandhaken

An dem Schieber sind die Hinteren zwei Hacken abgebrochen, Da es recht praktisch ist, aber kein gleichwertiger Ersatz erhältlich ist, wird konstruiert und das Teil kurzerhand gedruckt. Weil es weder Quer noch Hoch aufs Druckbett passte,…

Print approx. €3.84–€4.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
10
Likes
0
Rating
0
P
Printablesparticleflux

Wrapping paper wall mount / Geschenkpapier Wandhalter

Wall-mounted gift wrapping paper holder. For storing wrapping paper rolls, or similar light-weight, roll-like things. Maximum diameter per roll probably around 5cm. Mounted via two wooden screws of size 3. Included are versions for 2, 3,…

Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
1
Rating
0
P
PrintablesStevman

DHT 11 kryt čidla

Upravená krabička pro čidlo.

Print approx. €0.36–€0.43 excl. taxPreliminary estimate for one variant

Downloads
9
Likes
1
Rating
0
P
PrintablesOBA

Stable Wall Hook (15mm) / Stabiler Wandhaken (15mm)

Motivation Why should I design yet another wall hook? ... Well, because I intend to use it as wall mount hook for my solar panels (30xwxh) on a wooden wall, which requires well defined dimensions. For my case, the base wooden planks of…

Print approx. €2.19–€2.67 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
9
Likes
2
Rating
0
P
PrintablesPaludarium

MCZ Remote Wall Mount - Wandhalterung für MCZ Fernbedienung

A safe place for the tiny remote control of a MCZ pellet stove. Two magnets (diameter 10mm, 2mm thick), two drops super glue and a piece of steel (20x35x1mm) will make a simple wall mount. The wall mount could be attached to the wall…

Print approx. €3.34–€4.09 excl. taxPreliminary estimate for one variant

Downloads
7
Likes
0
Rating
0
P
Printableskillershead

[Simple ]Wallmount for Ballholder-Dog / [Simple] Wandhaltung Ballhalter-Hund

Made for this great gadget / Gemacht für diesen kleinen Helfer :=) → → https://www.prusaprinters.org/de/prints/108174-ball-holder-dog-toy ← ← [Englisch] Since i have printed the Ball Holder i wanted a holder for the holder. Here i Have a…

Print approx. €0.54–€0.66 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
7
Likes
3
Rating
0
P
PrintablesPontus

replacement button for childs gate hardhead

replacement button for hardhead childgate

Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
7
Likes
0
Rating
0
P
PrintablesFokieH

Husquvarna Anbauplattform Radhalterung / wheel mount

Hier findet Ihr ein Modell zur Aufnahme der Räder der Husquvarna Anbauplattform für Rasenmäher. Ich habe einige Engstellen im Garten die ohne die Räder an der Plattform beim Vertikutieren deutlich einfacher zu befahren sind. Dafür…

Print approx. €3.25–€3.97 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
5
Likes
1
Rating
0
P
PrintablesMrBramme

Rusta self-adhesive hook magnet mount

A simple mount to be able to magnet mount the self-adhesive hooks from Rusta. You pick howmany magnets you use, up to 9! I used 5 and stuck the hook on it. works like a charm. magnet diameter is 10,1mm and 2,1mm deep.

Print approx. €0.41–€0.50 excl. taxPreliminary estimate for one variant

Downloads
5
Likes
0
Rating
0
P
Printableswojti

Nidhögg - Articulated Dragon

Hello! I present to you my articulated dragon model. Its print in place and require no supports . Made with a use of Blender. I encourage you guys to post a make after printing. Im curious of your filament choice and the print result!…

Downloads
11,138
Likes
1,483
Rating
4.89
P
PrintablesVedicFutura

Ayodhya Ram Temple - NO SUPPORTS REQUIRED!

Model Updated, addressing all the issues with this STL. Please check out the link for the NEW VERSION: https://www.printables.com/model/686627-new-version-ayodhya-ram-temple-no-supports-reduire Print Model Description: This Hindu temple…

Downloads
10,440
Likes
541
Rating
4.2
P
PrintablesPrusa Research

3DHUBS MARVIN

Author: 3DHubs https://www.3dhubs.com/ Marvin is a simple keychain and he serves as a test print for registration on 3DHubs. 3DHubs is a service where you can get paid print jobs. So you can make money with your 3D printer. Feel free to…

Downloads
8,443
Likes
495
Rating
4.92
P
PrintablesPiksel

Buddha-Budda

For Ears You Can Use Paint Support Mode In PrusaSlicer, And Set It Organics Update 16.05.2024-I Add New Fixed Buddha Model File

Downloads
5,964
Likes
484
Rating
4.88

3D scanned Buddha statue

After buying a Einscan-SE this was the first thing I scanned. a random buddha statue my wife owns. The details this thing got is amazing. Be sure to tune your support settings well. Print instructions Pretty can do anything with this.…

Downloads
5,412
Likes
564
Rating
4.75
P
PrintablesMcLovin

Cabinet Door Spray Bottle Holder (no holes/adhesive)

Print Settings: No supports needed (as long as your printer can handle bridges fine.) Layer height : 0.32mm (you could go lower, but thicker layers will make it stronger) Walls : minimum 3-5 Infill : doesn't matter; anything >10% should…

Downloads
4,963
Likes
3,121
Rating
4.87
P
PrintablesMr. MegaTronic

the American Craftsman Bungalow Birdhouse

the American Craftsman Bungalow Birdhouse! This birdhouse features two entrances, upper ventilation through the chimney and windows as well as sloped drains in the base to allow fluid to run out. There are multiple interior platforms…

Downloads
4,938
Likes
1,960
Rating
5
P
PrintablesMagmabow

Handheld Tension Sander

The belt is flexible and small to fit into medium to large holes. Also conforms well to both external and internal fillets I suggest using 200-600 grit, and printing with PETG. Model is slicer scalable, although provided scale gives the…

Downloads
4,205
Likes
2,866
Rating
4.52
P
PrintablesVC Design

Cable Clips Collection - Self Adhesive - 4 Variations ( Parametric )

Electric Cable Diameter 2mm -> 6mm, mounted using double sided tape The STL files are scalable

Downloads
3,532
Likes
940
Rating
4.93

Duality Infinity – Seamless 3DHex Skins (For Duality LED Track System)

3D Print an amazing modular LED track system with SEAMLESS Diffusers. Say goodbye to visible lines where the tracks meet. These diffusers fit on my Duality LED Track System. I'll show you how I designed, how to 3D print, and install these…

Downloads
3,451
Likes
741
Rating
4.33