152 models
Maximize your receiver setup with a one-of-a-kind 3D print. Engineered for precision and flair, The Audio Mount Pro is a must-try print for enthusiasts! Introducing the Audio Mount Pro, a remarkable 3D printed solution for mounting up to…
Print approx. €3.32–€4.05 excl. taxPreliminary estimate for one variant
There are several different designs existing for z-axis Prusa Mini spool holders. Main types are vertical (spool is hanging or rolling in standing position) and horizontal (spool is lying). Why not vertical? The main disadvantage of…
This is a symmetrical version of the classic diagonal burr puzzle (which dates back to at least 1905 ), with a modern twist that when solved it forms a sphere. This is an easy print, no supports are required, and you'll need to print six…
A laptop stand version that can switch between holding the laptop vetically with the lid closed, or diagonally with the lid open. You switch between the two modes by, well, just sort of plopping it over on its side. I did make it…
With the original 90° corners 3 networkcables were a little too tight for my taste, so i made a 45° variant.
I expanded the bottom and added an handle. The modification makes it possible to print on smaller printers. The printer enclosure fits with the cover on. For ABS or PETG, I suggest glue stick, brim, and enclosure. It tends to warp.
I did not care about being compatible with other tiles. I just tries to make these as versatile as possible. Plan is to build the dungeon as adventurers enter a door/opening. Taking the tiles from already visited places and creating new…
Print Settings Printer brand: Creality Filament Brand: gst3d Printer: Ender 3 V2 Rafts: Doesn't Matter Supports: No support needed Edition: Tinkercad.com
Need a better way to organize your baking sachets? This slim, diagonally arranged organizer is designed to store small packets like vanilla sugar, baking powder, cream stiffener, and flavorings in a clear and space-saving way. With a…
an easy way to connect two hcw panels or just to have two inserts
I use inexpensive diagonal wire cutters and they have a very sharp tip. They sometimes come with a protective cover, but it doesn't stay put and usually gets lost. I wanted to design a small cover that would stay in place.
Bambu Lab H2 Series Diagonal 4-Inch Exhaust Duct Adapter (4-Direction) This is a diagonal exhaust adapter designed specifically for the Bambu Lab H2 series (H2D, H2S, and H2C). It allows you to connect the printer’s exhaust port directly…
This is a corner piece for when you need to run a rod through the body diagonal of a cube of 2020 extrusion. I needed to build a cube that would stand on and rotate around a point, so I needed a way to run a rod through the body diagonal.…
I'm a big fan of the OpenForge dungeon tiles for D&D designed by @devonjones, and I've been steadily building out a set of my own. In designing a new encounter for my players, I realized that there isn't yet a Diagonal Cut-Stone tile that…
Interior diameter is 3.0 inches / 76.2 mm. Interior height is 2.0 inches / 50.80 mm. No supports are required. The model responds very well to scaling in your slicer if you want different sizes. The table below provides scaling factors…
With this dice is it possible to test out your diagonal dimensions on your 3d printer. Dimensions of the dice are 20mm x 20mm x 20mm. Update: 19 April 2019: Added one with a stronger foot connection Print instructions Unassociated tags:…
I did not care about being compatible with other tiles. I just tried to make these as versatile as possible. Plan is to build the dungeon as adventurers enter a door/opening. Taking the tiles from already visited places and creating new…
Here's a pair of diagonally lined stencils for making fun patterns. Use it for papercrafting, painting, or whatever suits your fancy. Happy making!
You can check the correctness of the dimensions along the X and Y axes, as well as the diagonal. Throw it to print and see, along the X and Y axis there should be 100 mm, the diagonal 125 mm. After that, you can either mechanically…
I did not care about being compatible with other tiles. I just triesd to make these as versatile as possible. Plan is to build the dungeon as adventurers enter a door/opening. Taking the tiles from already visited places and creating new…
Ring Box with diagonal hinge
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
9 holes with spaces between which can be used for thick handled items and paintbrushes. I needed a paintbrush holder and the original version of this was too tall for me. So I tweaked it.
By default the model is 150mm x 150mm x 0.5mm, scale the x and y axis as needed, keep them the same to make sure the models stays a square.
Two sticks with racks can mesh into each other and transfer movement into a different direction. Thanks to Sabetta Matsumoto for the idea to have an image of the rack on the front of a stick also appear on the back. This makes it easier…
Set of different-size Corner Skadis Boards. I originally designed this to attach to 2020 extrusion framing. Uses M5 clearance holes for mounting. Sizing Chart: File Name Size Corner cut Printed footprint M5 holes Slots…
This is a ziptie anchor designed for use with a diagonal orientation. The main advantage of this, is it allows you to use zipties to bind two different objects together in a lattice position without simply turning a normal anchor 45…
Original design by guma.designs - post a make and tag us on instagram if you like @guma.designs Printed and tested with 0.6 mm nozzle. No supports needed.
Took the wonderfull original design and put a front diagonal slot. Lets see if the filament will keep inside right! Lets see if this way the filament will not slip out of the guide :) I also made the triangle estructure thicker, so it is…
Assembly make sure all supports are removed and surfaces are smooth - nothing has warped Put the outer ring on a level surface - adding a bit grease will help to make the balls stick adding the balls - if some roll away in the center -…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Another great design by Stewart Coffin. Wood copies are beautiful but very expensive. Six pieces, all different, assemble in an unexpected way into a cube. This puzzle can be tricky to take apart if you don't know the secret. But putting…
This model is compatible with the lego system.
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
2 options to hook your pliers to the HSW (Honeycomb storage wall)
Simple Block with a diagonal hole from the top to the side and one horizontal out the bottom. Compatible with the Hape Quadrilla Toy.
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Simple VHS Tape diagonal display. Printed in PLA with 15% infill.
A diagonal holder for a reflecting telescope, designed for a diagonal of 35mm or larger. Revision: Increased clearance on bolt holes to match ISO standard for close clearance Increased clearance on nut recesses Added nut recesses in top…
There are more Brick wall tiles in my account just search my Models for “BRICK” Designed for Print in Place USE Bridge mode its 12mm MAX Distance i use 8mm Lines infill and for Details use 0,15layer it prints well in 0,3 Have fun
Pedal holder & wheel mounts for mounting a bicycle diagonally from a wall. Would suggest making adjustments to the pedal holder via the cusomizer section that is specific to your bike. Basically make it narrower and shorter to accommodate…
I wanted a phone stand so I could run my iPhone diagonally in Standby Mode, but also turn the charger horizontal so I could place my non-magnetic Airpods on top to charge wirelessly. This is my compromise. It works great with an Apple…
Added diagonal vents and slots for camera and display cable.
This model is compatible with the lego system.
Nozzle scrubber for the Prusa XL which uses the widely available silicone scrubber brush from the Bambu Lab A1. Inspired by the original but realized that the center of the nozzle only sees one row of the scrubber. Not 100% sure that's…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
its a plarail cross section
what is this? we had an electrical junction box, closed by a lid 15x15cm, fixed by two 4 mm metric screws. this box had glued wallpaper with some structure and been painted white several times over the decades. the lid broke and the…
IPAD 10. / 10th generation (2022) Wandhalterung - wall mount - 10,9" (27,69 cm Diagonale); mit abgerundeten Ecken ⚠ WICHTIG: Die Ausrichtung im Slicer Drucke das Teil NICHT flach auf dem Rücken liegend! Warum? Wenn du es flach hinlegst,…
Even the normal base does not tip easily! But if you want extra protection go XL. Normal: XL base size:
I have one of my G3's mounted high in a room. unfortunately that made it where it could not see low enough. This is just a simple diagonal with a hole. The idea is to use a single screw to mount this to the wall, then the adhesive pad…
Build your own tabletop terrain environment with ease - from Fantasy DnD, Sci-Fi Wargame or Gritty Trench Crusade terrain , using our unique, 3D printable STL tileable floors, walls, arches and much more. No magnets required No glue…
Pattern for a fence or Spanish wall ornament for a paravent
This is a 90° Diagonal mirror it connects to the telescope with a 2.5" diameter. and fits tightly to a 1.25" eyepiece. I used an 40x60x3 mm optical mirror that I cut to dimensions. This type of mirror can be found in old overhead…
Always facing the problem that (liquor) bottles have a leaking lid when putting them into the freezer? Your freezer is too low to place them standing upright? Use this Diagonal Bottle Stand! Feel free to improve (and give feedback)!
Original design by guma.designs - post a make and tag us on instagram if you like @guma.designs Printed and tested with 0.6 mm nozzle. No supports needed.
Slim and sleek - Easier to drop in, smaller, less materials (26g-31g), it's a win-win-win. Made to print with no support
Here is yet another dovetail impossible puzzle. This one is pretty easy but geometrically interesting! To open, slide 45 degrees up and diagonally in the same time (you will get it when you will assemble it the first time). There is a…
Simple IKEA SKADIS Wall Mount - Uses Double-Sided Tape - Diagonal Print for strength and No Supports Inspired by: https://makerworld.com/en/models/920783-ikea-skadis-wall-mounts-use-double-sided-tape#profileId-884856
Had to make a diagonal holder so the drawer could close! Looks pretty neat this way anyway. Should print in place, no supports.
I wanted to have a very solid but lightweight and yet simple fpv race copter frame. This frame is incredible durable. This frame has even withstood several hard crashes so far. The frame may not be as light as a carbon frame, but the…
These two sliding arrows can be used to compare two diagonals when assembling a box for example. min. length 200 mm max. length 275 mm Parts: 1x Inner rail 1x Outer rail 1x Thumbscrew 1x M3x16 Socket Head Screw screw 1x M3 square nut 1x…
Lunt 1.25" Diagonal Blocking Filter Shorty Conversion Kit for Imaging and Barlows 3d printable eyepiece cup and eyepiece extension for the Lunt Solar Systems diagonal blocking filters. I recently acquired a Lunt LS50THa hydrogen alpha…
Assemble the 7 pieces into a cube shape. This puzzle was inspired by the classic Soma Cube puzzle, which also is a 3x3x3 cube puzzle with 7 distinct pieces. However, this puzzle is different because all the pieces consist of blocks…
A tray for the ICON 7 in. Diagonal Cutter [59168] There are options for stackable and nonstackable with both small and medium tolerances, as well as basic non-gridfinity trays
While building some cabinets I was having difficulty using my tape measure to determine if the build was square. A Pinch Stick was what I needed. I had a 4' piece of Rockler T-track in the corner, an idea (for the moment), and a 3D…
These can be useful but if you aren't careful this will ruin the whole "on grid" part of the lego monorail system and the non constant radius of curves. Also check out these other free printable files: My monorail designs (motors, tracks,…
Introduction PrintABlok is a system designed by 3D Printing Professor. It consists of stackable, buildable blocks in a variety of shapes; all of standardised sizes, and is very (and I do mean very ) open to extension. The so called…
Meine eigene Version eines Diagonal Brace Kit für meinen Neptune 4 Plus Fand die Optik der vorhandene Upgrade Kits nicht ansprechend Benötigt werden: 2x Original Strebe vom Neptune 4 Plus mit original Montagesatz 4x Augenschraube M5x55mm…
Eine Wandhalterung für das IPAD der 10. Generation mit VESA 100 x 100 Bohrung seitlicher Einschub des IPAD Kabelkanal verdeckt auf der Seite
This is my attempt to make adapters for the switches to work diagonally on grid. You can use this to build yard ladders or just using switches in diagonals generally. Each switch needs 3 adapters to change the connector and for alignment.…
12mm web thickness. Flange is 5mm, will need M4x8mm bolts when installing on 2020/2040 aluminum extrusions update 10/11/2017 - I've made a slightly modified version of this for securing to a base, if you have a Tevo Tarantula :…
Diagonal measuring gauge for larger objects, typically drawers. min. length 450 mm max. length 840 mm Parts: Sauter T-nut profile ( sautershop.de , not affiliated) 2x gauge 2x thumbscrew 2x M4x20 hex screw 2x M4 heat set insert Print…
Originally, my Ender 3 sat on a shelf with a restrictive height so I could only mount the spool holder directly onto the side of the extrusion frame, losing me 80mm in usable Z height (250mm down to 170mm). This design works by allowing…
works, upper part press with ca 10-15kg..with hand
After I made up a frame brace ( https://www.thingiverse.com/thing:2626456 ), I realised that with some small modifications, it could also be used to secure the frame to a (wooden) base when installed between the Y-rail and the XZ frame...…
Some time ago, I created this fusion of a light mount and a spool holder that I found on printables. However, there is an issue with that - with full filament spools, the spool side of the printer is heavier, and the printer wobbles. I…
Always taking the photos ? feeling left out ? use the new phone mount to velcro to posts, polls, tree branches, and set the timer, or use a bluetooth controler :) Well after design my first phone holder, I starting to thing of ways to…
Lo cierto es que esta pieza es una autentica chorrada, pero para mi ha sido como pasar de la noche al día. Al colocarla en los brazos de la delta mini kossel elimina al 100% la pequeña "holgura" que queda en el cabezal. Junto con unas…
I designed this prop guard for my QAV-PIKO 2" quad. It weighs about 3.25 grams each. I provide 4 mounting holes for 2mm screws at 9mm diagonal spacing, but only 2 screws are required to hold it well. * Update 12/7/2018 * Added a larger…
The puzzle consists of six identical diagonally notched square sticks of arbitrary length. The notches go exactly to the centre. Print six to complete the puzzle. I have designed these to be 15mmx15mmx52mm. enjoy Category: Puzzles
This 3D-printed vase features a modern, stylish design with vertical striations that create a sophisticated texture. Its sleek, square shape and smooth, minimalistic aesthetic make it perfect for showcasing flowers or as a decorative…
Should fit standard 9"x9" Broan/Nutone Bathroom vent as a replacement cover
This is a fixed model - it actually allows to move in both directions.
This is an adapted version of the Vertical Cuttingboard Rack to a diagonal design, as the vertical one wouldn't allow my boards to fit the space I had available. I also increased some of the rack's spacing between tabs so I could fit…
Hexagons are the bestagons. Some shapes are just correct. The HexWave is a 3" (76mm) wide, 2" (51mm) deep container with a hexagonal exterior that follows a sine wave as it rises, wider at the base, pinched at the waist, and flared back…
Two tone Diagonal Pony Beads
A 2x5x4u holder for the Knipex 74 01 200. Sits flush so perfectly stackable - both Magnet and non variants available.A 2x5x4u holder for the Knipex 74 01 200. Sits flush so perfectly stackable - both Magnet and non variants available.
Modified the back geometry to fit around the M4 fixed nozzle scrubber Bambu A1 - diagonal vs the original brush shape. Also added a slotted cutout on the bucket front to enable insertion of labels to help identify the loaded filaments.
Spiral diagonal vase made in blender using displacement modifier no support vase mode 0.2 layer height
I created this model so that I could wall mount the “Stark 's Axe” model created by @ICosplayInsanity . Please see their page for the original model. This is only the mount. I suggest using bicycle handlebar cloth on the indents where the…
Diagonal USB-Stick holder for using in a drawer.
I'm using a non-impressive Wansview camera so there is one mount for that and then the standard ¼"-20 bolt hole from the original. This fits perfectly between the two screws on the front that hold the left Y axis.
This took a few tries, but these rod ends fit well in the end of a chopped off "sturdy stake" from Lowes/etc and fit well around an all metal U-joint for the Rostock Max. It was designed in OpenSCAD and those SCAD files are included, if…
Needed even more flexibility when mounting my openGrid to existing holes. SlicKrusader Version helped with 3 out of 4 holes, but to fit the 4th, i needed the hole to be diagonal. So I frankensteined this.
Inspired by https://www.thingiverse.com/thing:4614064 The top of my frame was shaking when printing fast due to some play in the bottom corners. This is supposed to fix that. 2 brackets needed per corner.
Der Bilderrahmen wurde mit PLA gedruckt Die Bildhalterung müsst ihr euch im Slicer verdoppeln so das ihr 8 Stück drucken könnt sie sind alle so angepasst das ihr sie nicht skalieren müsst genauso wie die wandhalterung. Ich habe die…
Diagonal mount for e3d/Titan extruder combo. Because the Titan extruder has an offset, the nozzle is about 2cm to the right. I've tried to rotate it diagonally so that its centered. There are two different versions, one for the modular X…
I did this to mount a switch under a table. I recommend printing as shown in the picture (the .3mf file is exactly the same) to minimize the risk of layers peeling off from each other during screwing down.
![ICON 7 in. Diagonal Cutter [59168] (Gridfinity)](https://media.printables.com/media/prints/f17f808f-3010-4241-ae92-0749a430eae9/images/10713902_7ecab0f3-f866-495d-a02b-d414a6a8290e_3741de58-7939-4aeb-bb3f-7a43459b4e88/icon_7in_diagonal_cutter_59168_screenshot.jpg){kind=icon}
