P
PrintablesBeaver
Desk Mount Headphone Holder / Mount / Clamp
A remix of mistertech's headphone holder with a reversed cord holder. Works on desks up to 40mm thick.
- Downloads
- 28,802
- Likes
- 4,455
- Rating
- 4.92
Search results: dph
5,115 models
P
Printablesprntmkr
Earbuds Cleaning Tool V2 – Durable & ergonomic earwax remover for in-ear headphones
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
- Downloads
- 5,091
- Likes
- 1,289
- Rating
- 4.92
P
PrintablesLayerCake
Headphone Stand
Since this stand is pretty big I split it into two pieces which can be printed together on one plate on the Prusa i3 MK3S. The print does not need any supports when printed as setup in the “Headphone Stand Split Complete.3mf” file or if…
- Downloads
- 3,537
- Likes
- 278
- Rating
- 4.94
P
PrintablesMikolas Zuza
Headphone hook / SD card holder
Combo headphone hook holder and a single SD card holder. I've originally made the hook for my Koss Porta Pros, which have a very narrow headband. Due to popular demand, I've also added a version for wider headbands. And there's also the…
- Downloads
- 2,719
- Likes
- 435
- Rating
- 4.88
P
PrintablesCalebTimoteo
Iron Man Hand - Headphone Stand (Decoration)
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed (use tree supports, build plate only) Scale it as you like :)
- Downloads
- 2,218
- Likes
- 531
- Rating
- 4.33
P
PrintablesVlastimil
PS5 controller and headphones holder
This is a simple wall mount for a PS5 official controller and headphones. Just print everything out of PETG (I used Prusament PETG) and glue it together with superglue. To fix it on a wall, use Mamut Glue or similar one-component glue.…
- Downloads
- 1,899
- Likes
- 212
- Rating
- 4.91
P
PrintablesJakub Kříž
![Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger](https://media.printables.com/media/prints/664262/images/5232779_79e6456f-825b-420c-b549-25ccaeddc536_e9b42033-6509-4546-87ec-a2d2b3b002b1/dsc_3556.jpg)
Desk Headphones Hook [Easy to Print] [Multiple Variants] / Clamp / Holder / Hanger
The Desk Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a horizontal desk up to 22 mm thick . It features a simple and elegant design…
- Downloads
- 1,853
- Likes
- 136
- Rating
- 4.88
P
Printablescrit
Cat Ears for Headphones (Single Part)
Once upon a time, I printed this: Cat Ears for Headphones by usernamexx - Thingiverse Today it broke :( So I designed my own to improve upon the design. What makes these better in my opinion is that it prints in a single part and is hence…
- Downloads
- 1,760
- Likes
- 384
- Rating
- 4.88
P
PrintablesAMPDesignworks
Tweaked Headphone Holder Desk Clamp
I wanted to remove the radius overhangs on the print but realised the original STEP files were exports of the STL so I've exported clean STEP files as well as made my minor tweaks. Thread was changed to GL20 thread to hopefully improve…
- Downloads
- 1,412
- Likes
- 169
- Rating
- 4.89
P
PrintablesSaddamCZ
Flat-back Headphone Stand
A free-standing desktop headphone stand, similar concept as the famous MakerBot stand , however designed from the ground up with the idea of the back of the stand being flat. This allows the stand to be placed with it's back against a…
- Downloads
- 1,354
- Likes
- 85
- Rating
- 5
P
Printablesmakermac
Westone IEM Case with Flush lid / Headphone case
UPDATE - 3-15-2023 This case is meant to be a little loose in order to protect your expensive in-ear monitors or earbuds from getting tossed around or wound tightly which can add wear and tear and strain cables over time. BUT i always…
- Downloads
- 1,339
- Likes
- 145
- Rating
- 4.83
P
PrintablesDJK
Bionic Headphone Stand (Generative Design) by David Kaden
Check the hight of your headphone before printing this! You want your stand be some cm higher then your headphones. Feel free to give me a tip if you like it! :)
- Downloads
- 1,249
- Likes
- 187
- Rating
- 5
P
PrintablesJohn
Headphones holder
Simple headphones wall mount with hidden screws. Print instructions I would recommend you to use some strong filament but even PLA is strong enough. Also to make holder more durable use 3D honeycomb infill on 30% or gyroid on 40%. The…
- Downloads
- 1,030
- Likes
- 80
- Rating
- 4.93
P
Printablesskxc
Headphone Desk Support
Headphone desk support, thought out as modular - I also want to print some other models to attach to the desk, things like a sorting tray for small parts or a soldering iron holder. While the support itself easily slides in, after you…
- Downloads
- 1,011
- Likes
- 140
- Rating
- 4.7
P
PrintablesJakub Kříž
![Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook](https://media.printables.com/media/prints/663848/images/9073575_3e0a47ae-93d3-4674-baa9-523682eaa44c_2ecbe634-d193-4580-af2c-590abfc9a03b/headphone-clamp-v23-32-ext.png)
Vertical Headphones Hanger / Clamp [Kallax] [Easy to Print] [Multiple Variants] / Holder / Hook
The Bookshelf Mountable Headphones Hanger is a handy accessory that allows you to keep your headphones organized and within easy reach. This model is designed to be mounted to a bookshelfs vertical stands ranging from 18 mm thick up to…
- Downloads
- 812
- Likes
- 135
- Rating
- 5
P
PrintablesBoogie
Headphone stand
Headphone stand Print instructions: For the look i recommend to print both parts with 0,15 mm layer height Fasterners: 1x M8x16 screw DIN 912 1x M8 hex nut DIN 934
- Downloads
- 789
- Likes
- 131
- Rating
- 5
P
PrintablesSaddamCZ
Underslung headphone hook
A headphone hook designed to be glued under a desk or under a shelf using double-sided tape. Print instructions The "shelf" part of the hook is ca. 50 mm deep, scale the model accordingly if your headphones have bigger bridge than that.…
- Downloads
- 765
- Likes
- 98
- Rating
- 4.83
P
PrintablesGoldfinch
Headphones Holder
Very simple headphones holder. Should work for many types of headphones. Basic parameters: Dimensions: 70x28,2x44mm Holes: 2xØ3,5 mm Supports: not required
- Downloads
- 740
- Likes
- 70
- Rating
- 5
P
PrintableseMarco
Wide desktop headphone holder (modular)
Modular headphones holder with clamp for your desk or shelf. It has a large (detachable) support to avoid dents. I couldn't find any other design with similar characteristics here on PrusaPrinters, but after quite a lot of digging on…
- Downloads
- 697
- Likes
- 104
- Rating
- 5
P
PrintablesDrakein3D
Apple Airpods Max Headphone Hangar
Apple Airpods Max Headphone Hangar Printed in Prusament Recycled PETG .2mm layers 20% gyroid infill Printed flat on the closed back I carefully measured and modeled a hangar for Apple Airpods Max noise-cancelling headphones. When in…
- Downloads
- 679
- Likes
- 70
- Rating
- 4.8
P
PrintablesMindCubby
Miniature Over-Ear Headphones for Labubu - Print-in-Place & Satisfying Snap
This is my original design for Miniature Over-Ear Headphones , specifically scaled to be the perfect accessory for collectible figures like Labubu, Pop Mart, and other 1/12-scale art toys . The unique print-in-place construction means no…
- Downloads
- 620
- Likes
- 63
- Rating
- 5
P
PrintablesJoshua Symonds
Headphone hanger with hidden wall mount
A nice rounded wall hanger for a pair of headphones, this version has a hidden attachment. Choose from a smooth mounting bracket (I use this, attached by a 3M Command strip trimmed to fit) or a bracket with a single screw hole for a more…
- Downloads
- 580
- Likes
- 80
- Rating
- 4.86
P
PrintablesMatMake
Headphones holder
Headphones holder : You can print the holder with an infill of 20% but you have to setup an infill of approx. 50% for the edge next to the screw pitch (see GCODE file if it's not clear) to increase the strength of the print. Thereby you…
- Downloads
- 537
- Likes
- 40
- Rating
- 4.86
P
Printablessh
Earbud/headphone Shirt Clip (for cabel allowed to move back and forth in the clip)
I needed this remix for my wife :) She hated cable position being clipped without a chance to move (as it is tighten in the original from Ben G. [thanks for the design!]) So here: the cable is going inside, where the t-shirt is being…
- Downloads
- 507
- Likes
- 34
- Rating
- 4.5
P
PrintablesCustomiz3D4U (C3D4U)
PS5 Controller and Headphones Stand
Organize your headphones, controller and charging cables with this unique stand featuring a built-in drawer for a clutter-free experience. Make sure to check out my matching stand for PS5 games:…
- Downloads
- 501
- Likes
- 81
- Rating
- 0
P
Printablesbjamdesign
Headphones - Shokz Opencomm Charging Mount
A charging mount for the Shokz Opencomm/Opencomm2 headphones. The original charging cable fits securely in the mount and gives a flat surface to mount using double-sided tape or 3M Command Strip. Allows the charger to be hidden behind a…
- Downloads
- 489
- Likes
- 53
- Rating
- 5
P
PrintablesDhurum
Headphones hook
This is a two-part hook for hanging your headphones under the table. Hook part need to be printed on it's side, brace part with the cutout facing up. The screw holes are designed for 3.5 mm flat-head wood screws.
- Downloads
- 466
- Likes
- 48
- Rating
- 5
P
Printablessh
Desk Mount Headphone Holder / Mount / Clamp - reversed cable holder (less robust remix)
Differences against original: parts are less robust (as I dont think some parts must be that thick, it holds only headphones..) so I have made some parts thinner (with the same overall dimensions) as a result also desk can be thicker to…
- Downloads
- 463
- Likes
- 36
- Rating
- 4.88
P
PrintablesÉLETHER
IKEA SKADIS Porte casque audio / headphones holder
FR: Il peux porter des tailles de anse jusqu'à 45mm EN: It can carry bight sizes up to 45mm
- Downloads
- 443
- Likes
- 29
- Rating
- 5
P
PrintablesJerrod H
Table Clamp Hook for Water Bottle, Purse, Headphones, etc.
Hang something off a table. Designed for YETI Rambler or similar water bottle lid, but it'll work for anything that size – headphones, purse strap, etc. My first version uploaded puts the screw on top of the table. A newer version puts…
- Downloads
- 413
- Likes
- 51
- Rating
- 4.67
P
PrintablesJ Lake 3D
Headphone Stand Optimized Remix
A headphone stand for desks etc optimized for 3D printing. Inspired by SaSSY Design's “Headphone stand and holder - simple modern design” but redesigned from the ground up to increase print speed, remove bulk, and reduce tipping over from…
- Downloads
- 412
- Likes
- 40
- Rating
- 5
P
PrintablesWolvie
Formula 1 F1 Headphones Stand
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
- Downloads
- 356
- Likes
- 78
- Rating
- 4
P
PrintablesCelta
Headphones wall hanger
I was looking for a new headphones wall hanger and found twothingies design , this had almost everything I wanted apart from its dimensions. Changes Increased the width to be bigger, so the curve would be smaller and the headphones sit…
- Downloads
- 325
- Likes
- 37
- Rating
- 4.83
P
PrintablesMichal Blazek
Headphone Stand
Stable Sony WH-1000XM5 headphone stand with charging cable box. The upper part is designed exactly for the Sony WH-1000XM5, but it will certainly fit on other headphones. The upper part is printed separately due to the height of the…
- Downloads
- 324
- Likes
- 41
- Rating
- 5
P
PrintablesMatyáš Flek
Universal simple headphones holder
the screw works fine, its a bit smaller so the worse 3D printers still have a chance to print it well. holds strong , didnt fall at all, looks clean , has a little stop to hold the headphones better so they dont fall off. I prepared the…
- Downloads
- 304
- Likes
- 32
- Rating
- 4.5
P
PrintablesIvo Slanina
Under Table Headphones Holder
Use double sided tape to hold it in place.
- Downloads
- 276
- Likes
- 31
- Rating
- 4.8
P
PrintablesApostolos Dragoumanos
Soda Clamp and Headphones
It s a clamp for a desktop that hold a soda can and headphones
- Downloads
- 256
- Likes
- 69
- Rating
- 1.5
P
PrintablesMake by L.
Headphones wall holder
This headphones holder can be screwed (with two 40mm screws) to the wall or furniture.
- Downloads
- 228
- Likes
- 26
- Rating
- 5
P
Printableszuberio
KZ EDX PRO Headphones Folding Case (Print-In-Place)
A Print-In-Place folding case for KZ EDX PRO headphones. The headphones are safely and securely protected inside the case and wrapping the cord around the outside keeps everything closed. No supports or post-print processing needed!
- Downloads
- 221
- Likes
- 22
- Rating
- 0
P
PrintablesTronnic
Quest 3 (&2) Audio Mod - Headphones KOSS Porta Pro for BOBOVR M3, M2 & ELITE Strap
Hi everyone! I was very underwhelmed from the default Quest 3 Audio. Firstly I went with the DAS Mod, but found the strap to be uncomfortable, especially with glasses. I decided to modify my KOSS Porta Pro headphones and make them fit to…
- Downloads
- 202
- Likes
- 45
- Rating
- 5
P
PrintablesSteve Schwartz
Command Strip Headphone Holder
Found this on Thingiverse, Perfect design to attach to the side of my computer.
- Downloads
- 199
- Likes
- 45
- Rating
- 5
P
PrintablesFredslund
Headphone Table Hanger - Horizontal
This model can be printed in any material, but i recommend PETG. The model should be printed strong, so i recommend 4 perimeters and 25% infill. Happy Printing!!
- Downloads
- 197
- Likes
- 24
- Rating
- 0
P
PrintablesXorsinhoX
Headphones holder
headphone holder mounting on laminate library shelves (18mm)
- Downloads
- 188
- Likes
- 21
- Rating
- 4.33
P
PrintablesDarkBruce
Headphones holder for my desk
Design is fully done in fusion 360, done during a live twitch as an example Simply print both components, and easy assemble by screwing it in place. I used 4 perimeters to ensure sturdiness, printed out of lime green PLA prusament. EDIT -…
- Downloads
- 187
- Likes
- 19
- Rating
- 4
P
Printablesflof
Simple Headphones desk holder
Turn the screw to tighten Great for thicker desks
- Downloads
- 181
- Likes
- 19
- Rating
- 4.4
P
PrintablesMike Ant
Headphones stand / stojánek na sluchátka
A simple and stable desk stand for headphones. If you like the model, please give it a like. ❤ Jednoduchý a stabilní stolní stojánek na sluchátka. Pokud se vám model líbí, dejte mu prosím lajk. ❤
- Downloads
- 178
- Likes
- 14
- Rating
- 5
P
PrintablesMichal Hlaváč
Modern headphones Stand ( for KOSS PORTA PRO)
Story behind model For years, the KOSS PORTA PRO headphones have been my enduring musical companion. Their timeless design continues to deliver an exceptional audio experience that never fades. Recently, upon repurchasing this immortal…
- Downloads
- 174
- Likes
- 34
- Rating
- 0
P
PrintablesMBart
Cat ears for Bose 700 Noise Cancelling (700NC) headphones
Did you ever find yourself debating whether to buy headphones with proper noise cancelling or headphones with good cat ears support? No need to choose anymore! Now you can have state of the art noise cancelling AND superb cat ears! With…
- Downloads
- 171
- Likes
- 30
- Rating
- 0
P
PrintablesTechniack
NZXT Puck Cable Manager & Headphone Hook
This is my take on the NZXT "Puck" style cable organizer. This is designed to coil a headphone cable or VR headset tether inside the channel and hang the headset or headphones over the outside of the cube. Print instructions This print…
- Downloads
- 168
- Likes
- 9
- Rating
- 0
P
PrintablesExtra Fox
Grado Headphones Rod Blocks
This is one of those things that if you need them, you'll know. Otherwise you probably won't give them a second thought. If you need them, you've either had one break or you learned that if you want to customize your headphones, you're…
- Downloads
- 166
- Likes
- 31
- Rating
- 5
P
PrintablesJanphi
Headphones Cable Organizer
Designed to take small in-ear headphones including the cable and keep them safe
- Downloads
- 149
- Likes
- 20
- Rating
- 4.5
P
Printablesanimatorgeek
Anker Life Soundcore Q30 headphone band mender
My Q30 headphones, like every over-ear headphone I've had before them, broke after a mere four months of use. Fortunately, the headband has a spring steel structural piece, so I could still use them, but the broken plastic threw off the…
- Downloads
- 143
- Likes
- 19
- Rating
- 5
P
PrintablesRazelak
Skullcandy Crusher Evo headphone replacement arms
This is a simple replacement arm i built for my wireless Skullcandy Crusher Evo headphones. the mod is very easy to install, just pop the old arms out with a screwdriver and the new ones should fit in just fine, it goes in the same way…
- Downloads
- 138
- Likes
- 15
- Rating
- 0
P
PrintablesJoelpf
Wide Headphone Hook for Flexispot Standing Desk
If you have a Flexispot standing desk and headphones, give this hook a try! It mounts using the existing bolts in the top of the desk leg (fits both left & right sides). The original model wasn't wide enough for the strap of my…
- Downloads
- 134
- Likes
- 27
- Rating
- 5
P
PrintablesWolvie
Ferrari F1 Headphones Stand
CZ Jsem velký fanoušek Formule 1 a potřeboval jsem stojan na moje sluchátka k PC. Tak jsem dostal nápad a vymodeloval jsem si můj vlastní stojan. Našel jsem na Thingiverse skvělá loga všech týmů F1 od uživatele StijnDej. Link je uveden.…
- Downloads
- 133
- Likes
- 22
- Rating
- 5
P
PrintablesLukasWolf servispcnachod
remaked hook for headphones to use with 300mm desk
used photo of original hook as canvas, look to RMTB for original files, i will remade thread too, probably, as original snaps when overtighten edit: just uploaded remake of thread insert, rotate hole toward hotplate in slicer, it was…
- Downloads
- 132
- Likes
- 17
- Rating
- 5
P
PrintablesDGA
Philips SHP2500 headphones repair kit
Repair kit for Philips SHP2500 headphones. To print all parts need to add in slicer mirrored part ( full kit in g-code file) Material: PET-G -recomended Layer high: 0,2 or lower Supports needed under the cylidrical parts ( support added…
- Downloads
- 126
- Likes
- 18
- Rating
- 5
P
PrintablesMacronot
Ikea Expedit/Kallax shelf Headphones holder (updated)
After using this for sometime, I have added a hole to the side and screwed it place with a wood screw . Updated Increase the walls of the shaft to increase strength. Redone the tapering to print better Settings Supports under the crossed…
- Downloads
- 123
- Likes
- 39
- Rating
- 5
P
Printableshvrkh
Pouzdro na sluchátka JBL LIVE 670NC / Case for JBL LIVE 670NC headphones.
Pouzdro na sluchátka JBL. Jde o pouzdro na sluchátka JBL LIVE 670NC. Pouzdro je udělané tak, aby byl maximálně využit prostor. Uprostřed je přihrádka na kabely. Jedná se o dvoudílný model. Víko drži na krabičce pomocí magnetů. Používám…
- Downloads
- 107
- Likes
- 14
- Rating
- 0
P
PrintablesMarwis
Headphones holder
Hello, I designed simple heaphones holder. There are 2 versions. First (screw version) is for every desk and you can screw it with simple screw. Second version (Ikea Bekant version) is for Ikea Bekant desk,…
- Downloads
- 86
- Likes
- 5
- Rating
- 4
P
Printablesollie
Snap-fit desk headphone stand.
A simple, easy-to-print desk-mounted snap hook. The original design is built for a 3cm desk, but you can change this directly in the slicer. The simple design snaps right onto the desk and has an option for padding if you are worried…
- Downloads
- 78
- Likes
- 14
- Rating
- 5
P
PrintablesVojTech3Dprints
McLaren headphones holder
CZ/SK Vhodný pro nenáročné uživatele, pro milovníky McLarenu a F1. k připevnění jsou zapotřebí 2x M2,5x20mm šrouby. Děkuji za stažení a užívejte si model EN Suitable for undemanding users, McLaren fans and F1 lovers. 2x M2.5x20mm screws…
- Downloads
- 75
- Likes
- 10
- Rating
- 4
P
PrintablesPolyMastery
Headphone Holder Stand Desk Generativ Design
This is a simple pressure that requires supports (optimally with organic supports). In addition to the STL, I also include the 3MF and gcode files that I used to print the files shown in the images on my Prusa MK3s+. The table top may be…
- Downloads
- 72
- Likes
- 18
- Rating
- 0
P
PrintablesMartinD
headphone holder - remix martind
For Headphones with max width of 3,5 cm Max Clamping distance 3 cm
- Downloads
- 67
- Likes
- 11
- Rating
- 5
P
PrintablesVSVlab
Support pour casque audio /Headphone holder
3 versions du support : Simple Avec attaches câble et encoches format USB type C Avec attaches câble et encoches format USB type C bicolor 2 coussins différents. Le coussin est à imprimer en FLEX/TPU/TPE de préférence Le mors de la vis de…
- Downloads
- 66
- Likes
- 8
- Rating
- 0
P
Printablesvrata48
(not only) Headphones Stand
Easy to print stand for headphones and mobile phone. Two parts fits together nicely and holds firmly. Gluing parts together is not needed and stand can be disassembled and assembled again and again. The height between the base and the pad…
- Downloads
- 65
- Likes
- 6
- Rating
- 0
P
Printablesstrojaři světce
Retractable headphone holder
Print-in-place headphone holder for installing under table with 4mm screws.
- Downloads
- 65
- Likes
- 8
- Rating
- 0
P
Printablestelemarklarry
Headphone monitor hook
I needed a hook for my wireless headphones to hang on the side of my monitor. The blacked out area is only 9mm wide and just hanging them on the side blocks the top of the screen. I printed this in PLA and this is modification number 4. I…
- Downloads
- 61
- Likes
- 10
- Rating
- 0
P
PrintablesSherm8th
Headset / Headphones Holder for LG 27UL500-W 27-Inch Monitor
I got tired of my headset hanging off the side of my computer monitor when I wasn't using it. It would also block a portion of the screen. There isn't another good place to hang the headset so I made this model as a way to hang the…
- Downloads
- 61
- Likes
- 3
- Rating
- 0
P
PrintablesTalbot
Adapter for ear cushion from Marshall Monitor 2 to Major 3 headphone
My ear cushion from my Marshall Major III was very used. So I make an adapter for use a ear cushion from a Marshall Monitor II that I had. It's printed with my prusa MK3S+ in 0.2 mm and with organics supports everywhere. I have recycled…
- Downloads
- 60
- Likes
- 12
- Rating
- 0
P
PrintablesLukasZat
Honeycomb storage wall- Headphone holder
Headphone holder for your honeycomb storage wall. If you want to check the honeycomb storage wall then go to: https://www.printables.com/model/152592-honeycomb-storage-wall If you like my model, please be so kind as to upload your own and…
- Downloads
- 60
- Likes
- 10
- Rating
- 5
P
PrintablesAlexander Brückel
Dust cover for Sennheiser Headphones
Dust cover for the Drop Sennheiser HD58x Jubilee and Drop Sennheider HD6xx. If you have slightly smaller or larger pads/cushions but with the same shape, you can simply adjust the size in you slicer. The cover was measured with new and…
- Downloads
- 55
- Likes
- 5
- Rating
- 5
P
PrintablesEmiVa
Headphone and Earmuff hanger
Simple accessory for hanging headphones and alike under any surface. Recommended to print in PETG on 0.6mm nozzle with no top and bottom layers, 2 perimeters, 15-20% infill and 0.3mm layer height. Install using 3x ¾" screws and don't over…
- Downloads
- 51
- Likes
- 20
- Rating
- 0
P
PrintablesKERLE MAKERSPACE
Magnetic Headphoneholder
This is a magnetic version of my headphone holder for a magnetic wall or like me the metallic table legs of my desk. Simple design with a small logo. Perfect for headphones of any kind. Happy Printing and feel free to leave a comment or…
- Downloads
- 47
- Likes
- 9
- Rating
- 0
P
Printableskvee.phone
Cat Ears for Headphones - Compact version
I really liked the original cat ears, however the hooks were a bit too large for my headphones, so I've modified them a bit to fit better. I took the original .STL, remove the hook and let a STL fix-up tool fill the hole. Then I've added…
- Downloads
- 46
- Likes
- 16
- Rating
- 0
P
PrintablesSamSonHit
Headphone parts for Kennerton Magister
On the high-end Kennerton Magister HI FI headphones, I recreated the Left and Right elements that connect the headband to the two cups.
- Downloads
- 45
- Likes
- 1
- Rating
- 0
P
PrintablesThomas Fritsch
Headphone stand for Yamaha P125 piano
Headphone stand for yamaha p125 piano. Uses the existing screw on the piano keyboard
- Downloads
- 45
- Likes
- 6
- Rating
- 0
P
PrintablesGuym
Headphones under Ikea desk hanger
Simple headphone hanger for Ikea desktops without screw or glue. The cable management fits for 4mm diameter or less. Print instructions Use supports on the cable management, print in 0.2
- Downloads
- 44
- Likes
- 11
- Rating
- 5
P
PrintablesPantovarnikCZ
Headphone Stand / stojánek na sluchátka
Headphone stand that attaches to a shelf
- Downloads
- 41
- Likes
- 6
- Rating
- 0
P
Printablesmr beeps
Rubbermaid twin track headphone hook
Remix of Chris's twin track bracket with a headphone hook so now it's just a “one trick pony.” Printed upside down with supports on the hook, keeps the twin track hooks clean.
- Downloads
- 35
- Likes
- 11
- Rating
- 0
P
PrintablesZbyněk Král
Headphone Hook
Print instructions: Material: PETG Layer: 0,2 mm Perimeters: 2 Infill: 15% Infill Pattern: Grid Supports: No, Brim: No This model does not require any special settings, more details in the attached 3MF file. Part list: Printed part Bolt…
- Downloads
- 34
- Likes
- 9
- Rating
- 0
P
Printablesfake droid
3m Peltor headphones holder
Muffler holder for siegen weapon cabinet
- Downloads
- 33
- Likes
- 1
- Rating
- 0
P
Printablesbene
Headphone-Tableholder (22mm tablethickness)
With this print, you are able to hang your headphones from the side of your desk. Your desk has to have a thickness of 22mm. For me, this was more of a test-project trying to understand topology optimization. The structure you can see…
- Downloads
- 33
- Likes
- 2
- Rating
- 5
P
PrintablesPaPaja
Headphone holder
Printed in two parts First attach main part to wall, then insert second part into holes ====================================================================== Hello, I have updated this model. Instead of two holes a third was added for…
- Downloads
- 30
- Likes
- 6
- Rating
- 0
P
PrintablesBoomi
Headphones/Headsetholder for Ikea Kallax
Universal Headphone Holder for IKEA Kallax This universal headphone holder is designed for easy mounting on an IKEA Kallax shelf—no screws or tools required! All parts are 3D printed and can be assembled using just a 2 Euro coin. The…
- Downloads
- 29
- Likes
- 6
- Rating
- 0
P
PrintablesH0n_Za-
Magnetic headphones holder with microphone slot | PC case headphones mount (originally for Logitech G PRO X 2 Lightspeed
Simple holder for headphones & mic mountable on metal PC cases and other surfaces. Originally designed for Logitech G PRO X 2 Lightspeed and Sharkoon PureSteel case The microphone slots into a small groove on the front. My print…
- Downloads
- 29
- Likes
- 3
- Rating
- 0
P
Printablesjg
Another Headphone Holder
I needed a simple headphone hanger to attach to my Yamaha digital piano. The width of the hanger is 0.750 inches. The opening for the headphone part is 2.00 x 1.00 inches. I designed the model walls to be 2 mm (0.078 inches) wide so I…
- Downloads
- 27
- Likes
- 1
- Rating
- 0
P
PrintablesVetti
Headphone Stand with weight pockets
This is a remix of the excellent model by JYC_RS. I printed this a while ago but was never happy with the overall stability. So I added some weight pockets to the base. The new version is visually identical, while the total mass increased…
- Downloads
- 25
- Likes
- 2
- Rating
- 0
P
PrintablesKERLE MAKERSPACE
Headphoneholder for perforated sheet metal wall
This Headphoneholder mounts easily to your perforated wall using a dovetail System. The holes in my perforated wall have a diameter of 5 mm, so I used an M6 tap to fix the headphone holder. If it should have another perforated plate, I…
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesTomáš Hrdina
Headphone holder on the shelf.
Z cívky uřízneme jednu čtrtinu vytiskneme si zržák nasuneme ho na cívku a pověsíme na poličku.
- Downloads
- 21
- Likes
- 8
- Rating
- 0
P
Printablesconorlburns
DPH3205 ATX mount
Benchtop Powersupply case for the DPH32ß5 buck-boost converter. Has mounts for an ATX power supply.
- Downloads
- 20
- Likes
- 1
- Rating
- 0
P
PrintablesDragonne
Headphone holder for 1 inch thick desk
A headphone holder that goes on the side of the desk. Fits desks that are 1 inch thick only. The middle slot for wires. can be printed with no support if you print on its side.
- Downloads
- 19
- Likes
- 0
- Rating
- 5
P
Printables3DPrintM.D.
Cable and Headphone Hanger with Front and Side Extensions
This is a remix of the excellent cable hanger wall hook https://www.printables.com/model/384695-cable-hanger-wall-hook by @sternli27 . I printed at 0.25mm layer thickness and painted “snug” supports in the interior cave that provides for…
- Downloads
- 16
- Likes
- 5
- Rating
- 0
P
PrintablesDIYCyberPunk
Cubical Headphone Stand
At my office, we use acrylic shields to divide our cubicles. The shields are held in place with laser-cut adapters. The top of the adapters (12mm x 12mm) sticks up, creating a perfect mount point. Features include “Headphones” label,…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesREMLURELMI
Pad for Headphone Clamp
This nut is an addition to the previous model, and is compatible with previous designs. Features: Increases clamping area Allows for compatibility with thinner wall Retains the threaded screw Recommended print settings: Layer Height: 0.2…
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
Printablestswartz07
Headphone Hanger Spacer for Ikea Alex Desk
A simple, easy to print, reliable spacer bracket for Ikea Alex Desks. I needed to add a headphone hanger to the leg of the Ikea Alex desk, but the thin legs proved to be too narrow for the hanger brackets. As such, I designed this model…
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesOrbCorp
26° Angled Ceiling Headphone Mount with Cable Hook
Needed a proper angled mount to store and display my headphones. I meassured out the angle of my ceiling (see picture) and designed a sturdy 3 part ceiling mount. There are spacers in the back, for my wall/ceiling I designed the spacer to…
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
Printablesdima
Pegboard mount for Heavys headphones.
Pegboard mount for Heavys headphones. This is my first model in FreeCAD and almost the first print. So if you have recommendations or ideas, I'll appreciate if you share them with me. The way I placed hooks and mount is not accidental, I…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesRoni Serfas
Headphones trigger for shooting time-lapse photography mount for Ender 3 V2
With this piece you can use any headset with a button and use it as a photo trigger for timelapse. Adapted for Ender3 V2
- Downloads
- 7
- Likes
- 2
- Rating
- 0
P
PrintablesMichal Obrsal
Magnetic headphones holder
-This Is usefull and quick to print headphones holder. -Printed In PLA -I have used 2 14x5 neodym magnets and It holds up without a problem. If you want you can use slightly smaller magnets and glue them in so they would not move or…
- Downloads
- 6
- Likes
- 1
- Rating
- 0