230 models
If you have solar panels on a flat roof and the panels are less then 15 degrees mounted, some water will stay in the lower edge of the panel. After some time your panel become dirty in the lower part and it reduces photovoltaic panel…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
🚨 UPDATE: Check out the improved V2 here: BOM: Printed with ROSA3D High Speed PLA Gray Say goodbye to soggy, smelly sponges. This drip tray features a functional wave pattern on the bottom that lifts your sponge (or soap bar) slightly up,…
Soap bar holder that drains on its own
This 3D-printable stand is designed to hold sponges, washcloths, and soap, ensuring that excess water drains directly into the sink instead of pooling on your countertop. Say goodbye to soggy sponges and messy countertops with this…
A Soapdish tray for the kitchen or bathroom. Self-draining, large enough to hold soap bottle & sponge. Small version to hold a sponge or soap bar. Filename: 1 x Kitchen_Bath_Soap_Tray_Large_v1.stl Large enough to hold soap bottle & sponge…
BOM: Printed with ROSA3D Starter PLA Black Say goodbye to soggy, smelly sponges. This upgraded drip tray features a functional wave pattern that lifts your sponge (or soap bar) up, allowing air to circulate underneath and water to flow…
Creator:muskokaresearch https://www.thingiverse.com/thing:5352444
ENG: This pot can be used both as a self watering pot and as a classic pot with draining holes but with a modern design cover pot, since the bottom of the internal pot doesn't touch the one of the cover and allows the water to drain,…
My sister asked me to make her a soap holder like the one by Kitsch but with two slots instead of three like their product, and seeing as it was a pretty simple form, I threw this model together and printed it for her. Turned out quite…
Soap/ Sponge Holder + Drip Tray allows for easy drying with a self-draining design and removable honeycomb lid design for easy cleaning. Print Settings: Layer Height - 0.2mm Wall Loops - 3 Infill Density - 15% Support - Auto Tree Printed…
Introducing the Geometric Soap Holder! This model doubles as two soap holders in one! Otherwise, they can be used together for a more pleasing experience. Print Settings Keep layer height relatively low to achieve proper curves/slopes for…
I designed this soap holder as I couldn't find something similar in the market. The base is inclined for the water to easily drain into the sink but the soap bar rests flat. With this soap holder my soap is always dry! PS. It can be…
This is a part that connects to the lower part of the air conditioner and to it the hose for draining condensate. Because the shape is funnel, there is no need for a rubber seal. The diameter of the hole in the air conditioner is approx.…
BOM: Printed with ROSA3D Silk PLA Steel Say goodbye to soggy, smelly sponges and mushy bars of soap! This practical self-draining holder is the perfect utility print for your kitchen sink or bathroom counter. Designed with everyday…
This is a dish soap holder with a removable grate and the basin has holes for water to drain out. Mainly for use in shower. When printed at 100% the soap dish measures 120 mm x 80 mm x 20 mm. No supports needed. Print flat. Print…
This is a toothbrush holder which has a drain. It is easy to clean as all you have to do is wash it out with water!
You can add a captive nut and screw to hold the build plate better but it's not a requirement.
This is a soap bar holder I designed to drain. There are two variants to choose from based on the kind of countertop/sink you have. I personally like the more bulky one (v1b) as it doesn't fall in the sink as much. I recommend printing in…
Soap dish as bathroom accessories. Upper and lower part to disassemble for cleaning. HIPS for water and soap resistance.
I made this to hold a standard kitchen sponge. It holds the sponge slightly off the surface. Aids in sanitation. Drains extremely well and has zero pockets for things to collect. Look is sleek and modern. Durable. Has lasted several years…
(reupload from my Thingiverse) I recently came into possession of a small, chinese tea set and while researching how to use it properly, I realized that an essential piece was missing. So, instead of going out and trying to find a small…
I want a bring soap when travel; I want it air tight to prevent water leakage, and a grill to drain water when using.
Self-draining sponge area; This model is designed for ledge sinks. Flow area is 10mm above the ground and extends 20mm towards the front and so the water can be drained directly into your sink. Printed with support.
This is 6th model that I have ever made so if you think it needs improvements, please tell me in the comments so I can get it fixed. This sponge holder is self-draining and takes 1 hr and 40 min to print with PLA filament on Bambu Labs…
CENOTE | Self-Draining Soap Dish Keep your soap dry and mess-free with our CENOTE soap dish. Crafted with both beauty and functionality in mind, it drives inspiration from the enigmatic cenotes of Mexico, it fashions a self-draining…
This is a soap dish Thank you for every review, like and donation, It motivates and helps to implement new projects! Category: Bathroom
Design This is a 2 part draining soap/sponge dish. The base makes sure that the water drains out the front, while the top allows the soap/sponge to air dry. It's designed to work with standard kitchen sponges and should also work with…
the v2 have some barrier to keep the soap on the sreeen.
A simple and elegant soap dish/soap tray that automatically drains the water into the sink. Minimizes surface area to keep the soap dry and prevent it from sticking to the dish, while also keeping it from sliding off. Easy to clean.…
Hello hello! Ellipsis is simple one print soap holder. It drains the water itself and keeps the soap dry from the base. There's a small exit to be placed at the edge of the sink. I needed a soap holder and decided to make my own. I placed…
// deutsche Beschreibung ganz unten You can customise this draining rack as you wish : choose the size/length of the rack individually and the spacing between the individual elements This ensures that everything you put down to dry after…
Self-draining soap dishes in 3 different designs. No more lakes in your soap dishes! Choose the design and print! Sizes: 120x160mm No supports needed Any convenient material
Standard soap dish/soap tray with self-draining channels.
The adapter for draining the engine oil does not stain the motorcycle and the environment. Thread M 12x1,5. Lay the motorcycle horizontally with the oil drain bolt at the top. Screw in the adapter and clamp the hose. Stand the motorcycle…
Housemate insist on using one of these scrubbing brushes but would ither leave it on the bench and making a big mess or sitting in a cup with no drainage making it gross. realised at the same time there isnt a nice place to put the…
I got tired of squishy gooey soap bars. This was a quick, simple design to solve that issue. Shouldn't need supports.
My design of greek-style planter stand, with drainage outlet pipe ! Water your plant standing on it, watch the excessive water come out of the pipe ! Also added a mini pot to be under the pipe. Including the simple bowl planter. Can be…
A self draining soap dish with removable honeycomb tray. Sturdy and easy to clean No supports necessary
The Left-Middle part was printed left-side-down/right-side-up to make the print layer grooves let the water flow more easily to the sink. The Far-Right_with_drain_to_left part was printed right-side-down/left-side-up. The faucet front…
This is a simple sponge holder that drains the water from a wet sponge back into the sink. It can also be used for a soap bar. This model is designed so that you are able to print it without supports. Just make sure the model is standing…
Self-draining TPU tray to hold bar of soap, sponge, or scrub brush. Design provides plenty of airspace beneath object to allow drying. Printed 0.2 layer height, 15% infill (Elegoo TPU 95A)
Here are two models of soap dish: a draining model with water drainage holes and therefore intended to be used in a shower or placed on the edge of a washbasin or sink the same model but non-draining, ie not equipped with drainage holes.…
Designed for protect the feet of a garden table standing in the grass. The plastic feet have holes to drain any water out and keep the wood dry. The model is parametric…. for the most part :-). If you need a specific size leave a comment…
A simple and practical sponge holder designed to sit on the edge of the sink. The built-in drain allows water to flow directly back into the sink, keeping the sponge dry and the countertop clean. ✔ No more water puddles ✔ Compact and…
This compact sponge holder is designed to hold a sponge lying flat inside, promoting quick drying and easy access. It combines durability with a clean, modern aesthetic. Features: Rectangular shape with open top for optimal ventilation.…
very cool planter with a nice design
Designed for SodaStream bottles, this model is compatible with both 1-liter plastic and glass versions and may fit other bottle types. The pillars are modular and can be joined using the included connector ring. For guidance on preventing…
Self-Draining Sponge Holder | Wave Drip Tray - Remix raised by 6mm - Size: Large (115x85mm)
BOM: Printed with ROSA3D Starter PLA Black Keep your sink area clean and extend the life of your sponges with this cleverly designed, self-draining holder. No more soggy, smelly sponges sitting in a puddle of water! Key Features: Elevated…
A practical soap dish with a modern design that keeps your soap dry and clean. The removable lid features a decorative pattern that allows water to flow freely. The soap holder is easy to disassemble and clean, making it a perfect…
This model allows you to store cutlery (knives, forks, spoons etc) for drying next to your kitchen sink. Could also be used in the bathroom if the drain plug
Added an extra slot and resized the model to fit Kitsch bar dimensions.
Version one has no bottom. Version two has slopped bottom. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
No supports required! Designed to minimize filament use, while maintaining strength! Entire print fits inside a single Prusa MK3 bed! All perimeters are sized to perfectly print with two perimeters with zero infill! (except the base…
I created this tray to fit a tiled in shower shelf but it should work for most needs. 95mm / 3.75 inches deep You could add a bit of adhesive putty or something to the back to help keep it in place when picking up the usually stuck bar of…
This is my rather classic design concept for a soap dish. The bottom of the dish is slanted to allow the water to run off. This creates a stepped surface that may or may not look interesting to your eye. The finer the print resolution,…
Say goodbye (for good) to soggy, slow-drying sponges. This upgraded drip tray builds on the original wave design by combining a sloped drainage plane with raised airflow studs , maximizing both water runoff and air circulation. What’s New…
Original by TK3DPrinting https://www.thingiverse.com/thing:2350003 I wanted a planter that would also drain into a tray below it, and allow more room for roots to hold. The drip tray is optional and TOLERANCES HAVE NOT BEEN CHECKED, it…
Please print with enabling printing
Creality Halot ONE resin dump/drain station for pouring out the rest of resin out of the vat. For the station you can use one, two or three 10mm smooth rods. The holes for rods are 10,2mm, so if you would need modification, feel free to…
This modular organizer is designed to hold items like dish brushes, sponges, and other household essentials. Each 8×8 cm compartment can be configured with different container sizes (1/3, 1/6, 1/12 of the base) and heights (5, 10, or 15…
Sponge or hand washing brush box with hexagonal draining board. Material: PLA Nozzle: 0.4 mm Layer Height: 0.2 mm Infill: 15% Supports: no Brim/Raft: no
This is a corner mount, self draining shower shelf. Print using your choice of material. No supports required. It installs using double sided tape and silicon adhesive or caulk, folowing instructions such as these:…
This plant pot's features: Bottom Watering This helps keeps the surface dry so the soil is less likely to mold in a lower circulation setting like the indoors. Some plants also like this form of watering and don't like moisture on their…
As already done by oceanreef for its masks, this adapter allows the mounting of 22mm filters for medical use, on the draining valve of the decathlon easybreath mask. This design is currently being tested. Used in combination with the…
Ich habe für unseren Kühlschrank mehrere Boxen benötigt, die aber auch einen Abtropfbereich haben. Eignet sich sehr gut für Obst und Gemüse. Der Abtropfbereich kann optional gedruckt werden. Die Box selbst ist aber nicht spektakulär ;-) I…
Standard soap dish/soap tray with self-emptying channels.
I have yet to print the model so feel free to leave comments letting me know of any issues during printing/usage. I will try to respond to all comments. The soap tray needs to be flipped upside down for printing. If not it will not print…
Gooey soap sucks, and doesn't last very long. When you lay your soap on this, the water will drain away.
This soap dish is intended to keep water from pooling as you may find in a traditional soap holder. With drainage slots allowing water to drain into a sink if placed on the edge. This dish can also be printed with a TPU foot to raise the…
These inserts for your Lush soap tins. The design allows for drainage and air circulation, preventing soap and water buildup. The drainage tray has a low surface area to allow maximum air circulation, which keeps your soap fresh and…
Draining board for Tefal Optigrill XL. It eliminates the problem when the grill lid is lifted in the kitchen on the kitchen. Wash only in your hand. Don't put the dishwasher! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
As already done by oceanreef for its masks, this adapter allows the mounting of 22mm filters for medical use, on the draining valve of the decathlon easybreath mask. The design was conceived to be sealed with silicone to the body of the…
Remixed from Michael T's excellent soap dish. Added mounting holes for these specific suction cups: https://www.amazon.ca/dp/B0CX8W1CXG?ref=ppx_yo2ov_dt_b_fed_asin_title Since mounting with suction cups inevitably causes sagging, I also…
Did you know that when buying liquid soap, you're paying for roughly 80% water? Choosing bar soap over liquid, offers numerous benefits: Eco-friendly : Bar soap is often wrapped in recyclable paper, reducing plastic waste. Cost-effective…
Simple item for hooking table on a side to drain resin from it. For Voxelab Proxima 8.9 or flashforge Foto 8.9
This soap dish was a fun design project. Right now there are two options of for the soap tray. The flower of life tray or the solid tray. The solid tray is used to make a ‘spongey’ tray using the gyroid infill trick. The secret here is to…
Easy to take apart and clean. No supports needed. Works great, keeps sponges dry and water in the sink. 5/7/23 Version two added. I fixed a couple things I didnt love about V1. -Drain ledge now overhangs sink, therefor the print should…
extended the size and reduced gap
No More Mushy Soap! This soap holder is designed with one key feature in mind: efficient water drainage. Why this design works: Unlike flat soap dishes that let water pool underneath, this model features prominent drainage ribs . These…
Part prints with no supports if printed as shown in the picture attached on an stock Ender 3. I suggest if you print it in the orientation show that you slow it down otherwise it might warp.
This was very specifically made for a brush set I ordered off amazon. All areas do drain. The model does print well without any support. Bottle brush set https://www.amazon.com/dp/B086D7SX8K?ref=ppx_yo2ov_dt_b_product_details&th=1
Its the same Modell, just with some feet because my kitchensink has a lip at the side so it would not stand flat.
A self draining single & double base with outlet for soaps and sponges. Fits every style of you're bathroom or kitchen. Very easy to print.
Self Draining Sponge/Soap Holder :P
Honeycomb Makeup Organizer | Self-Draining 5-Compartment Holder A simple, functional organizer designed to keep your everyday beauty and bathroom essentials neat, accessible and dry. The five compartments feature different heights, making…
I made a wider base to improve stability with heavier cutlery, than it has a draining pound and a side opening where you can drain water without removing it every time and you can easily check the water level.
A stylish soap dish in the shape of a leaf for keeping your soap high and dry! This model also has a special drain channel on the bottom, to drain excess water from the container and thus going stale and smelling. Included is an stl file…
This model is useful when you only have one or two toothbrushes, but have more people in your family that want to use them. Just buy multiple heads and put them in the holder when not using them. You don't have to dry the heads because…
This is a simple oil filter drain tool designed for general aviation filters which are 3 3/4 inches in diameter It hangs over the side of a 5 gallon bucket allowing you to drain the filter before cutting open for inspection. I printed…
Simple coasters to put under plants. FreeCAD source included. Public domain license.
Draining board rack to allow air flow around drying things. We have a tiny draining board so i made this to add extra dishes and extend the draining board
This is a very basic, and fast 3D print to improve the Family Bathroom! This Project is great for a first 3D Print and has a awesome self-draining mechanism.
Vat wall extension for draining for Creality Halot One printer, to prevent dripping out of the vat when using the build plate drain (build plate drain by Min_s_Craft). The printer UV cover can be fitted while using this part and build…
A neat little soap dish for the edge of the sink. Any water from your hands while pumping soap drains back into the sink. Has recesses underneath for rubber feet that keep just enough air space so water doesn't get trapped underneath. The…
Update main body design for better drainage and more balancing options.
Never buy a planter again! One-time download gives you 40 sizes of planters varying from 6cm to 20cm The planters come with a build in draining tray to prevent overwatering. Print in any material. No supports. Print a pot and tray in the…
I designed this soap dish with SolidWorks to work with the soap saver pads that you can get for cheap on Amazon or wherever you buy that kind of thing. https://www.amazon.com/s?k=soap+saver&ref=nb_sb_noss_2 The bottom of the dish is…
