Search results: dril

Sort order

Counting matching models…

Collapsing Drill Sword (Print-in-Place)

This version of the Drill Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…

Downloads
70,536
Likes
6,193
Rating
4.72
P
Printableskerngebiet

Universal cordless Drill Holder/Mount (Makita, DeWalt, Bosch, Festool ...)

Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course. The following Makita tools have been tested so far in the 40mm version: Makita DTD171 Makita DDF484…

Downloads
22,347
Likes
7,435
Rating
4.88
P
Printablessquinn

Drill Guide and Dust Catcher

A must-have drill accessory tool that both allows you to make sure you drill a perfectly perpendicular hole while also capturing all of the dust and debris. The front of the tool rotates so that you can select the guide hole that will…

Downloads
17,027
Likes
7,061
Rating
4.88
P
PrintablesAK3D

Drill Dust Collector V3

Drill Dust Collector V3 - Modular 3D Design I'm thrilled to introduce the Drill Dust Collector V3. This tool, entirely designed and 3D-printed, features a 3-in-1 modular design and an eye-catching two-tone aesthetic for superior…

Downloads
14,604
Likes
6,017
Rating
4.86
P
PrintablesBear3DTek

Drill guide with dust collector - No supports

Thanks Hello! I needed to make a few holes around the house to make some installations and dust was an issue. Decided to design my own guide and dust collector to make it look the way I wanted. It doesn't need supports! =) Hi again! I…

Downloads
12,822
Likes
5,100
Rating
4.93

Drill Depth Stop Guide

Quick Setup Drill Depth Guide I did not use drill depth guide before and sometime I regretted it. Now there is no excuse, as I always have them with my drill bits. Design Features: Quick to setup. Just set the distance between the stopper…

Downloads
12,800
Likes
4,109
Rating
4.74

Drilling Bounding Ring

When I needed a depth limiter for the drill, I downloaded models from other authors. These are interesting models with a collet lock. But in fact, they were useless, because the fixation on the drill was insufficient and the limiters…

Downloads
11,502
Likes
8,135
Rating
4.92
P
Printablesfifindr

Drill Paint Mixer

Use 3 walls, 25% infill. A simple drill-powered mixing attachment designed for stirring paint, coatings, resin, pigments, adhesives, and similar liquids directly inside cans or containers. The mixer attaches to a standard drill and helps…

Downloads
9,489
Likes
2,918
Rating
4.86
P
PrintablesVC Design

Drill Guide - Metric

For IMPERIAL: https://www.printables.com/model/1371922-drill-guide-imperial This metric drill guide is the perfect helper for accurate drilling with bit sizes ranging from 4 mm to 10 mm . The guide is designed as a sturdy bar with clearly…

Downloads
9,488
Likes
3,706
Rating
4.81
P
PrintablesMerlwynd

Spool Drill Winder

This is a remix of my PrintDry Pro spool adapter (which in turn was a remix of a Thingiverse design by Skrutt84: Ender 3 - Filament holder DELUXE). This winder will fit spools with center holes up to about 80mm diameter. Use with a…

Downloads
8,951
Likes
1,152
Rating
4.93
P
Printablespejvl2000

DREMEL drill press

This model is a REMIX of 3Deddy's model from Thingiverse: https://www.thingiverse.com/thing:4148260 It's modified to fit the Prusa MK3S+ printer and it has several improvements : Smaller base, so it can fit to the printer bed Divided…

Downloads
8,406
Likes
6,258
Rating
4.74
P
PrintablesMakers Manual

Drill Dust Collector

This Drill Dust Collector sucks to the wall and removes the dust when connected to a dust extractor. It has a 35mm diameter hose size, which should accommodate most workshop vacuums ( I am unsure about home vacuums ). Can drill holes up…

Downloads
7,311
Likes
2,133
Rating
4.92
P
PrintablesTuTu

Drill Dust Collector and Guide - Plus Edition

This innovative dust collector is designed to optimize your drilling work. The model natively supports 27-28mm mineral water bottle mouths and includes an adapter, making it compatible with Coca-Cola, Sprite, and other standard beverage…

Downloads
6,512
Likes
2,072
Rating
4.86
P
PrintablesTheHamburglar

Adjustable drill angle guide

Lets you drill into something at a specific angle. It's quite small, the guide hole is 8mm. Optional: add an M3 screw to lock it in place. Or else it will just swivel around. Assembly Instructions: see gif

Downloads
6,312
Likes
2,956
Rating
4.63
P
PrintablesRCMakerLab

Super Stable Bench Drill For PCB. 3D DIY Bench-Drill For Hobby Workbench.

Many parts of the Mini benchdrill are designed for PLA filament. A few parts are designed for heat-resistant filaments (Petg, ABS, ASA). Assembly steps and details are shown in the video. This design has an automatic start-stop feature…

Downloads
5,711
Likes
897
Rating
5
P
Printableswerz 99

Drillbit Sharpening Jig for Dremel

Jigs for sharpening Drill Bits up to 10mm with a Dremel and a Cuttingdisk for a grinding Angle of 118° (standard) and 135° drillbits. Credits for the idea to voltNik:-) Update 20.4.2022: I replaced the model-files for those with threads…

Downloads
5,461
Likes
2,038
Rating
4.68
P
PrintablesAK3D

Drill Dust Collector V2

NEW MODEL, WITH ADDITIONAL FEATURES: https://www.printables.com/model/1193300-drill-dust-collector-v3 Drill Dust Collector with Centering and Marking Features V2. The drill dust collector is an innovative accessory designed to collect…

Downloads
5,224
Likes
1,454
Rating
5
P
Printablesoktane

Universal Cordless Drill/Driver Holder/Mount (Milwaukee, Makita, DeWalt, Bosch, Ryobi, Ridge, Festool)

Universal Cordless Impact Driver/Drill Holder A universal cordless Impact Driver/Drill Holder meant to organize your workbench as well as make it more ergonomic and easier to use. Front extrusion allows for it do double as a bottle…

Downloads
4,491
Likes
1,063
Rating
4.55
P
PrintablesTeachingTech

Portable drill press/depth stop attachment for hand drill - Open source

I have a pedestal drill, but it is guarded by two fearsome miniature goats, and it's not suitable for every project. I wanted a way to use my hand drill accurately for quick jobs, by adding a way to ensure holes were straight/square, plus…

Downloads
4,431
Likes
3,316
Rating
5
P
Printablesfifindr

Drill Dust Collector and Guide V4

This is Drill Dust Collector and Guide V4 , the ultimate multi-functional dust management solution for drilling tasks! Use tree supports on overhangs. Key Features: Vacuum Compatible: Connects to vacuum cleaners with a 35mm diameter.…

Downloads
4,402
Likes
1,736
Rating
5
P
PrintablesVC Design

Drill Dust Collector - Hands Free

Use tree supports :) Want to have a commercial licence on this model? → Join the CLUB :)

Downloads
4,227
Likes
1,273
Rating
4.92
P
PrintablesRobSmo

Drill and Screw Guide 90 degree

Simple drill and screw guide. Helps to drill perpendicular holes and screws. Tested over with my pergola project. Works fine. Super easy to get 90 degree angle. Scale for smaller objects. This one is designed for long (30cm) drills.…

Downloads
4,060
Likes
2,122
Rating
4.66
P
PrintablesFrank Soul

Soul Drill: Hand cranked squeeze drill

10/12/2022: Uploaded the correct nut and lead. The first ones were mirrored. The drill was inspired by push drills such as this one by LoboCNC: https://www.printables.com/model/132326-push-drill-with-adjustable-chuck The chuck is based on…

Downloads
4,029
Likes
2,579
Rating
4.43
P
PrintablesFinn

Omni Press (Drill Press & Heated Insert Press)

For bambulab users: you can find the model including print profiles here on makerworld . I wanted a drill press for my Dremel, as well as a dedicated press for installing heat-set inserts with my soldering iron. Since there are already…

Downloads
3,681
Likes
2,455
Rating
4.91

Self Centering Drill Guide

Details This is a device to get a centered hole, regardless of the width of whatever you want to drill into. It works by placing the stopper on either side of the beam, bar, etc. and twisting the device until both stoppers touch the…

Downloads
3,606
Likes
1,096
Rating
4.86
P
PrintablesLordS

Drill Holder

Fits drills of all sizes, from hammer drills to flashlights. Ribbed design for better strength and aesthetics. Includes an insert to reduce internal size for smaller accesssories so that overall size can stay the same for all tools. PETG…

Downloads
3,604
Likes
876
Rating
4.95
P
PrintablesLoboCNC

Push Drill With One-Way Clutch (and a decent chuck)

Most of the simple push drill models ( mine included ) have the annoying feature that the drill bit reverses every time you pull the sliding nut back up to the top. This version solves that problem by encapsulating the sliding nut in a…

Downloads
3,598
Likes
2,009
Rating
4.76
P
PrintablesVC Design

Drill Angle Tool

The Drill Angle Tool helps you drill at precise angles without expensive equipment. It comes with three inserts at 30°, 60°, and 90°, which are designed with an open structure so you can use most drill bit diameters . The tool rests on…

Downloads
3,571
Likes
2,070
Rating
4.67
P
PrintablesMike

Dremel 4000 Wall mount with drill tool bits storage

Dremel 4000 Wall mount with drill tool bits storage. The Dremel tool can be stored either way up/down depending on your preference. An additional section can be printed to expand your wall mount if required and can be mounted to the right…

Downloads
3,531
Likes
1,552
Rating
4.82
P
PrintablesPrinterforge

Pipe drill guide

Introduction Have you ever struggled to drill straight, centered holes in PVC pipes? I know I have! While working on a project that required precision drilling, I quickly realized how challenging it was to drill into smooth, curved…

Downloads
3,409
Likes
1,901
Rating
5
P
PrintablesTimon

Simple Filament Respooler For Drill

I recently needed to respool a spool of filament because the original spool wasn't compatible with the Bambu Lab AMS. All already existing models needed some additional hardware, which I just didn't wanted to bother getting. Thus I…

Downloads
3,407
Likes
240
Rating
5
P
PrintablesNABATES

Metric drill bit set wall mount 1mm to 10mm

Metric drill bit set wall mount 1mm to 10 mm

Downloads
3,326
Likes
854
Rating
4.67
P
PrintablesVC Design

Drill Guide - Imperial

This imperial drill guide is the perfect helper for accurate drilling with bit sizes ranging from 1/8 – 3/8 . The guide is designed as a sturdy bar with clearly labeled holes , making it quick and easy to select the right size for your…

Downloads
3,316
Likes
1,343
Rating
4.92
P
Printablescreateminds

Cordless Drill Holder

This model provides a convenient and efficient way to store and access various cordless drills under a shelf or a hanging cabinet. It is a simple, practical, easy to print, and nice looking solution as it saves space, reduces clutter, and…

Downloads
3,136
Likes
550
Rating
4.9
P
Printablesandrepadua

Drill Holder for Multiboard - Won't Fall!

Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments 2024-06-08 Update: I've added a 2nd version that uses Small Threat T-Bolts to attach to the Tile. This May be an alternative if you…

Downloads
3,127
Likes
371
Rating
4.81
P
PrintablesBalulo3Dmaker

Adhesive Trash Bag Holder – Wall-Mounted Organizer, No Drilling, Space-Saving & Durable

Keep your space clean, organized, and efficient with this adhesive trash bag holder set. Designed for convenience, these wall-mounted holders let you store and dispense trash bags effortlessly—no tools or drilling required.

Downloads
2,965
Likes
1,342
Rating
4.93
P
PrintablesBlackFury

Drill Guide - Metric - 90/45 degrees and corner

This is a remix of Helasius drillguide - https://www.thingiverse.com/thing:4839621 However, I needed it to be able to drill on a square corner. As per the original description, it fits sizes 3, 4, 5, 6, 8, and 10, with holes at 90º and…

Downloads
2,874
Likes
443
Rating
4.96
P
Printablesvivamus3d

Bosch GSR Bit Holder (Cordless Drill/Driver)

I liked the Bit-Holder for cordless screwdriver (Bosch) and had used it for several month, until eventually it broke recently as it has a weak spot at the right arm. As anyway the original was way too tight (had to scale up and expand the…

Downloads
2,773
Likes
118
Rating
4.75
P
Printableselatobi

Depth gauge set for 5-14 mm drills.

This is a set of Depth gauge for 5-12 mm drills. They have a opening for M3 nuts an cylindrical screws to tight the stop on the drill bit. Printed with PETG @ 0,2mm layer hight with 20% infill.

Downloads
2,746
Likes
1,261
Rating
4.67
P
Printablespoulanker

Perpendicular Drilling Jig (universal)

NOTE! I have made a remix of this design, incorporating fixes and new features. You can find the new model here: https://www.printables.com/model/649321-universal-drilling-jig-for-perpendicular-drilling…

Downloads
2,708
Likes
1,691
Rating
4.73
P
PrintablesAndréG

Drill sharpener for Bosch angle grinder

Drill sharpeners in various sizes for DIY enthusiasts - BOSCH PWS 9-125 CE - FLEX orbital sander The drill sharpener uses high-speed rotation for grinding (FLEX orbital sander), it is set at an angle of 118 degrees in total for both…

Downloads
2,698
Likes
943
Rating
5
P
PrintablesAK3D

Drill Dust Collector

The second version with improvements is available. Drill Dust Collector V2 Drill Dust Collector with Centering and Marking Features. The drill dust collector is an innovative accessory designed to collect dust during wall drilling with a…

Downloads
2,691
Likes
621
Rating
4.97
P
PrintablesWube Software

Factorio Electric Mining Drill

Electric mining drill from Factorio is ready for printing. It shares the same scale as all other official Factorio models. The drill can stand alone or could be placed snugly into tiles that are part of our grid system. Grids are included…

Downloads
2,648
Likes
349
Rating
4.5
P
PrintablesEmbrace Making

Snap Latch Drill Bit Case

Video above will walk you through the assembly of my 3D printed snap latch drill bit case. This rugged Pelican style case only requires two different pieces of hardware and has been successfully snapping open and shut hundreds of times…

Downloads
2,588
Likes
702
Rating
4.95
P
Printablesmaxelman

Milwaukee Drill/Driver Bit Packout Organization

You'll most likely want a mix of files for your exact needs. If you're using a 48-22-8436 5-Compartment Low-Profile Compact Packout , you can fix 3× Slim Long Bit Bins (or a mix of half-width bins) If you're using a larger 48-22-8431…

Downloads
2,557
Likes
506
Rating
5
P
PrintablesRenba

Drill Dust Collector (Strong Self Holding !) for Bosch, Festool, Hilti, Makita, Milwaukee,...

Please as a simple return for the job... Like, Share, and Post your prints ! Thanks ! Optimized for printing vertically like a breez.. No supports needed ! ;) Original file fit on 35mm diameter tube (Festool, Bosch,…) Update 26 March 2023…

Downloads
2,537
Likes
609
Rating
5
P
PrintablesChris Borge

Model 3 Sensitive Drill Press

Update 21/03/2025 Coming back to this to give it the documentation it deserves. Uploaded “connector block", “connector plate", “split base back”, “split base front” to allow base to be printed on smaller printers. A project ive wanted to…

Downloads
2,469
Likes
1,241
Rating
3.5

Dewalt Drill Bit Holder

This 1/4" Hex bit holder is attached to the opposite side of the drill or impact driver than the belt clip. This device fits a Dewalt DCF887 impact driver and DCD996 hammer drill. I'm sure it would fit most Dewalt 20v MAX drills/impact…

Downloads
2,444
Likes
478
Rating
4.92
P
PrintablesSisul

Drill Holder

Since I don't always want to use power tools to rework a hole, I was looking for a hand tool. I found inspiration in some designs at thingiverse, but the models did not suit me in the present form, they were too clumsy for me. A further…

Downloads
2,426
Likes
487
Rating
4.85
P
PrintablesFlash72

Gridfinity Drill Bit Set Holder

Gridfinity drill bit holder which holds a standard metric set of drill bits from 1mm to 13mm. Drill bit holder consists of three pieces (small medium and large), print them all to store a standard set. Includes versions with and without…

Downloads
2,360
Likes
444
Rating
4.87
P
PrintablesJonathan

Makita Drill Bit Holder (Magnetic)

1/4" hex shank bit holder for Makita cordless drill. Magnetically holds 5 bits and can hold extra screws/bits underneath. Print instructions Printed Materials: makita bit holder.stl Non-Printed Materials: 1 - M4 x 14mm screw (…

Downloads
2,333
Likes
520
Rating
4.71
P
PrintablesEmkatech (Mike)

Drill Bit Holder Ø1–13 mm

This drill bit holder is designed for DIN 338 twist drill bits , covering all diameters from 1.0 mm to 13.0 mm in precise 0.5 mm increments . All sizes are clearly labeled, keeping your drill bits organized, visible, and easy to access.…

Downloads
2,312
Likes
659
Rating
5
P
PrintablesRalf Hörhager

Drill gear pump

I design the model in FreeCAD. It was tried pumping water but oil should work too. The pump needs to be primed. Material used Gaskets are printed in TPU Gears are printed in PETG Casing and Lid printed in PLA You need 4x 608 Ball bearings…

Downloads
2,301
Likes
1,144
Rating
5
P
Printablescewo

Drill Stopper

Easy to use print stoppers These drill stoppers come as a paired collet and a nut. They are simply screwed onto the drill bit to the desired drill depth. No tool needed. The collet is kept small and doesn't mask the ongoing drilling.…

Downloads
2,279
Likes
643
Rating
4.92
P
PrintablesLoki-tactics

milwaukee m12 drill wall mount

M12 wall mount for drills. Keeps the drill close to the wall.

Downloads
2,242
Likes
314
Rating
5
P
PrintablesPL

Drill bit holder

this drill bit holder is designed for mounting on a wall via screws not for a peg board. It holds basically all the drillbits that you need. You can print the the upper surface with another color to read the printed numbers better. Just…

Downloads
2,213
Likes
324
Rating
4.91

Milwaukee M18 Drill Mount / Holder

This will securely hold any drill type M18 tool, and should work with most other brands as well. I use these to store my M18 drills, impact wrench, and impact drivers. It even works with other tools that have a pistol grip, such as the…

Downloads
2,174
Likes
254
Rating
4.78
P
Printablesfifindr

Drill Dust Collector and Guide V3

⚠ Important: Do not over-tighten the bottle to avoid damaging the print. Use tree supports only on build plate Introducing Drill Dust Collector and Guide V3 —the ultimate tool for keeping your workspace clean while drilling. This upgraded…

Downloads
2,169
Likes
598
Rating
5
P
PrintablesNico

Angle drill guide

Angle drill guide Possible to print in 2 colors (with one extruder) => change at specific layer For max 8 mm drill Requires a 20 cm / 20 cm print bed

Downloads
2,167
Likes
1,381
Rating
5
P
PrintablesHolzi

Drill Bit Holder 1-13mm (Bohrerhalter) to mount on French Cleat

This is a drill bit holder to mount on french cleat or sit on the work bench. You can add drill bits from 1mm to 13mm in steps of .5mm. On the back there are already 10mm deep holes for attachment to a French Cleat holder. (there´s a…

Downloads
2,152
Likes
236
Rating
4.83
P
Printablesfifindr

Drill Dust Collector and Guide Mini

Meet the Drill Dust Collector Mini – the ultimate helper for clean drilling! 🛠✨ Turn off arachne mode, use 0,25 mm layer height. Use tree supports. ✅ PET Bottle Compatible – Screws onto a bottle to trap dust & debris ✅ Built-in Guide –…

Downloads
2,151
Likes
822
Rating
4.89
P
PrintablesPhilippHee

Drill Bits Holder (v2)

Holder for a total of 23 drill bits with a size from 1 mm to 12 mm in 0.5 mm steps. The holder can be mounted on a wall with 2 countersunk screws. The drill bits holder is printed in 3 parts: holder, label and ruler (optional). The label…

Downloads
2,129
Likes
704
Rating
4.92
P
Printablesbassklampfe

Guitar string winder drill bit

A very useful tool, when you have to exchange strings on many guitars Nothing special about the print. Standard PLA, Standard Settings. Used Brim, but not sure if it's needed. Found at https://www.thingiverse.com/thing:2842644

Downloads
2,094
Likes
248
Rating
4.95
P
PrintablesTuna

Milwaukee - Vacuum Dust Collector for Drilling

Drill holes without the mess! I had it print on the face that touches the wall with supports for 50 degrees.

Downloads
2,066
Likes
413
Rating
4.75
P
Printablespj

Pillar Drill Press - Dremel

This a remix of the original by kapy27. The additional weight (8x M10 nuts) added and inprinted to the base plate. Levers are formed from M6 long bolts. Better and more stable pillar support. Print instructions Category: Machine Tools…

Downloads
2,061
Likes
721
Rating
4.64
P
PrintablesLumanieri

Makita 18V Battery & Drill Heavy Duty Mounts/Holders

Hello. These are Makita 18V Battery & Drill Mounts that is developed through meticulous measuring and testing to get the design accurate and durable enough for everyday use. These were designed, developed, and printed for every day use in…

Downloads
2,019
Likes
233
Rating
4.77
P
PrintablesLSC

Dremel / Parkside drill press

Hi! I want to introduce you my drill press for Dremel/Parkside multitools. It's easy to print and assemble - you only need a few screws and nuts to put it together. IMPORTANT NOTE: Print “Lock_nut_Parkside.stl” and/or…

Downloads
1,905
Likes
1,258
Rating
4.8
P
PrintablesShoe

Honeycomb HSW Drill Holder

Made this a bit thicker to hold the weight of a full-sized drill with a battery. I have a Dewalt, but this should fit most standard-sized drills and impact drivers.

Downloads
1,845
Likes
324
Rating
4.73
P
PrintablesJodameister

Drill Holder (Printinplace) - HSW Honeycomb Wall

This is my first printinplace model for the Honeycomb Wall. I want a drillholder that is tilts forward so that I can see and grip the drills better. The drillholder is for drills from 1mm - 13mm with steps of 0.5mm. On top is a labeling…

Downloads
1,836
Likes
356
Rating
4.88
P
Printableswerz 99

Drill Bit Sharpener for Dremel with Relief Angle

Drill Bit Sharpener for Dremel with true Relief Angle. This jig is using a Dremel Cutting Disk for Sharpening. The 2 Parts are held together with a M3 Screw and Nut.

Downloads
1,809
Likes
399
Rating
4.79
P
PrintablesTrocheHole

Drill Guide for 2020/3030 Aluminum Extrusion Profile

Drill guide that can be securely fastened to 2020/3030 aluminum profiles. Durability is enhanced by using metal pipes together. The STL files are designed for 5mm and 7mm drill holes , but the hole sizes can be customized by using the…

Downloads
1,777
Likes
587
Rating
5
P
PrintablesAK3D

Self-centering drill guide

Let me introduce my new 3D-printable tool, designed to guarantee you maximum precision when centering holes and drawing guidelines on the thickness of any panel! This tool is the ideal companion for woodworkers, hobbyists, and makers.…

Downloads
1,762
Likes
760
Rating
5

Simple Drill Holder (Universal)

I made one universal size, but check dimensions before printing to make sure, that your drill fits.

Downloads
1,722
Likes
728
Rating
5
P
PrintablesPGold

HINGE DRILL JIG

I was not satisfied using a Chinese made jig for drilling door hinges (35mm diameter holes) due to the size and options I don't need. Keeping its principle I change it to accommodate needs of an average woodworking enthusiastic. Printed…

Downloads
1,676
Likes
336
Rating
4.91
P
PrintablesPavel

IKEA SKADIS - drillbits holder / držák vrtáků

Organizer for drillbits for IKEA SKADIS board. Three sizes of holders available for most common drill bit sizes. FreeCAD files provided as well, if You need adjustments for different drillbit sizes. Each holder needs 2 hooks to hold on…

Downloads
1,668
Likes
376
Rating
4.77
P
Printableshmoldenhauer

Gridfinity drill bit trays / long tool holder / tweezers holder (height 2.5)

The original design is taken from Miguel Camba , who was inspired by Alexandre Chappel's drill bit tray . I reworked the Fusion360 file to have a better adjustability. It is not perfect yet, but spacing, widths and lengths are now fully…

Downloads
1,664
Likes
283
Rating
4.67
P
PrintablesGameFan

Drill Battery Holder Parkside

Slightly altered variation of my battery holder for Bosch batteries, redesigned to fit Parkside X20V batteries. Again with two versions: countersink and normal screws, 0.5-1mm clearances printable on most machines, should be a snug fit.…

Downloads
1,655
Likes
157
Rating
4.81
P
PrintablesPetclaud

Vacuum Sucker for Drilling - Karcher Shop Vac 35 mm OD

Thank you JonnieZG for sharing your "Vacuum Sucker for Drilling" ( https://www.thingiverse.com/thing:2939576 )! Great design since through the hole you still have full visibility on what you are doing, while in the same time through that…

Downloads
1,624
Likes
313
Rating
4.7
P
PrintablesWhistleR

Drill holder (wall mounted)

wall mount for drillbits, and some ekstre holes

Downloads
1,588
Likes
199
Rating
5
P
PrintablesBogomips

Drill depth stop

Drill depth stop used to drill multiple holes at the same depth easily. The default settings are for CHC M3 bolts but the parameters can be tweaked for any drill bit size and any bolt size in Freecad. Note: If you want other sizes and…

Downloads
1,561
Likes
755
Rating
4.9
P
Printablesaleung

Drilling guide and drill dust collector for wall drilling

A simple to use drilling-jig for drilling perpendicular/straight holes. A container is added to collect drill dust when drilling on wall. It's customizable. Click "Open in Customizer" to generate your own model. Or you may find one…

Downloads
1,517
Likes
253
Rating
4.5
P
PrintablesGentleDesign

Drill Mixer – Paint, Mortar & Cement

Turn your cordless drill or power drill into a practical mixer with this 3D printable Drill Mixer Attachment! Designed for quick and easy mixing of a wide range of materials such as paint, plaster, grout, mortar, cement mixtures,…

Downloads
1,493
Likes
575
Rating
5
P
Printablestoddanglin

Wall mounted drill bit holder

A compact, wall mounted drill bit holder for bits sized 1/16" through 1/2" in 1/64" increments. This holder measures 8" in length and holds bits at a 30º angle quick and easy access. For smaller bit sizes (1/16" through 3/16"), two slots…

Downloads
1,492
Likes
247
Rating
4.8
P
PrintablesRedKnight358

'T' Clamp for Drilling 2x4 Wood

This clamp is designed to hold two 2x4 wooden planks together at a 90 degree angle so that holes can be drilled to secure both boards together. Worked well for my purposes. Do note that you will need more walls while printing in order to…

Downloads
1,490
Likes
670
Rating
5
P
PrintablesX-at TM

drill sharpening

A tool for sharpening the tip of a drill bit. The angle of the tip of the bit is 121° degrees. If your angle grinder has

Downloads
1,487
Likes
327
Rating
5
P
PrintablesTitanori

Small Drill Guide 90° 60° 30°

This drill guide is designed for precise and accurate drilling at multiple angles. It features special guides for drilling at angles of 90°, 60° and 30°, making it versatile for a variety of projects.

Downloads
1,469
Likes
471
Rating
5
P
PrintablesLinthis_world

Cordless Drill Holder

**** Update 24.5.2022 v16 - Fixed a Designissue with the corner

Downloads
1,464
Likes
192
Rating
4.92
P
PrintablesMW-Mechanical

Centrifugal impeller style water pump- drill powered

Video performance demonstration through the following link- All components 3D printed except nine M4x16 hex head bolts & nuts and one M6x50 hex head bolt and nut . Size: roughly 80mm x 80mm x 50mm Couplers intended for 1/2"IDx 5/8"OD…

Downloads
1,450
Likes
353
Rating
5
P
PrintablesPhil

Honeycomb Storage Wall: Drilling Jig

I'm just starting to mount my Honeycomb Storage Wall. I wanted a way to easily drill a hole that's centered in the hex for the mounting screw. This drilling jig is meant to go into the cell that needs a screw hole to be drilled, you drill…

Downloads
1,416
Likes
433
Rating
5
P
PrintablesUsername

Кондуктор / Насадка для заточки свёрл ( Tool for sharpening drill bits )

Насадка на точило с абразивным кругом для заточки свёрл , угол при вершине 130°. Насадка подойдёт для сверла диаметром до 10 мм, угол 130° может быть использован на свёрлах по дереву и мягкому металлу. Насадка крепится к точилу болтом М6…

Downloads
1,412
Likes
75
Rating
4
P
PrintablesVolan

Bosch Battery Stand and Drill Bit Holder v.1.3

A stand for the 12V Bosch Battery, and bit holder for the GSR 12V-15 FC drill. The bit holder may fit other Bosch drills if they have the same rubber band it attaches to. Apparently the bit holder also fits the Bosch GSR 12V-20 brushless…

Downloads
1,411
Likes
228
Rating
5
P
Printablesmscalora

Parametric Mixer Drill Attachment

I was inspired by a recent model upload to create a parametric paint mixer. This model with associated Fusion 360 CAD file turned out really well. You can customize the width, height, blade thickness, bore hole diameter, bore hole length,…

Downloads
1,404
Likes
392
Rating
4.75
P

Flexible segmented vacuum hose for drill press with parametric FreeCAD design

This is my take on a segmented vaccum hose. It is parametric and can be adjusted within quite a range with very basic FreeCAD knowledge. The 3mf and gcode files here are for a segmented hose with approx. 40mm inner diameter. The inlet…

Downloads
1,401
Likes
274
Rating
5

Drill Guide

Durable Drill Guide I have one long leg and one short leg. As a result, I can't drill vertical hole or make a vertical cut using hand tools. In the past, the solution was to place a block of wood under my left foot. Now with a drill guide…

Downloads
1,388
Likes
185
Rating
5
P
PrintablesAlexandre

Bosch 12v GSR/GDR Drill Driver Impact Wall Holster

Slim version remix of the original. Two versions - for the drill/driver and larger for the impact driver. Reduced overhangs. I printed mine upright in ABS, 20% infill, 3 walls, 0.2 layer height. My first model/remix. Used basic tools in…

Downloads
1,380
Likes
154
Rating
4.89
P
PrintablesDaVinci2000

Drill / bit handle 1.5 - 6 mm

Universal handle for drills from 1.5 to 6 mm as well as screwdriver bits. The designs available on Thingiverse either fit just single drill size or require printing a set of sockets for each drill size. I needed all-in-one adjustable…

Downloads
1,372
Likes
258
Rating
4.94
P
Printablespeterholly

Drill bit sharpener

I needed an angle guide for sharpening bigger drill bits on my bench grinder. With this I can move the bit on the grinder table from side to side and tilt it around the table edge. For now I have added only 118 degree tip angle files.…

Downloads
1,369
Likes
216
Rating
5
P
PrintablesGlennovitS 3D

Drill Dust Collector (use with or without a vacuum - incl. alignment marks)

Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…

Downloads
1,356
Likes
435
Rating
4.83
P
PrintablesLoboCNC

Push Drill with Adjustable Chuck

Inspired by Speedy777's Pump Drill ( http://www.thingiverse.com/thing:731086 , which was inspired by Performance 3D's drill), this slightly beefier version features an adjustable chuck that can handle bits from 5mm (3/16") down to 1.5mm…

Downloads
1,352
Likes
248
Rating
4.73
P
PrintablesEadubs

Double Hex Bit Holder for DeWalt Drill and Driver

This is a remix of "1/4" hex bit holder for a DeWalt drill" by Lowell Alleman. I wanted to be able to hold more than one hex bit on the side of my impact driver at a time, so I made a double barrel bit holder. I used the same M3x10 screw…

Downloads
1,345
Likes
239
Rating
4.96