Duke Nukem bust
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint
- Downloads
- 1,154
- Likes
- 275
- Rating
- 5
146 models
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint
Habe hier eine GoPro bzw. DJI Osmo Action Cam Halterung für KTM Motorrädlenker mit 28mm erstellt die in der mitte aber eine 33mm Schale haben. Da speziell bei KTM die untere Lenkerbrücke einen Verbindung um das Lenkerrohr mit anderen…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a small spacer that allows you to adapt the Xbox One controller thumbsticks to older xbox controllers including the xbox 360 controller, the OG xbox S controller and even the Duke controller without restricting functionality (full…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a 10 mm (gauge 1 narrow gauge) scale model of Duke from Thomas the Tank Engine. It is designed to be printed as the parts import into the slicer and i've noted which need supports. I used .1mm layer heights for minimal sanding and…
Printed with PLA layer 0,2 some parts need support, but i try to reduce to the maximum, Its my first complicated model that fit perfect on the great Chasis from Dukedok, that you can download and build yourself from here. Gracias amigo…
The Power Plate allows you to add a little horse power to your bike with a simple bolt on part. Allows your bike to breathe better giving it better throttle response and more horsepower overall. I've seen cheap CNC parts made for this but…
Introduction : The Extreme Series of Builders Kits were designed to print, assemble, and fly easily. These rockets can be flown on lower-powered motors in a park, or with higher-powered 24/29mm motors. Typically, an Estes F15 can loft…
Update 2024-05-25 - [rear-axis - A2212]: Moved the screw hole on the axle by 1.75mm instead of .8mm to have more space between the motor screws and the gear. Update 2024-05-26 - [rear-axis may2024 update - a2212]: The original rear-axis…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
License plate holder for the KTM Duke 790. This design uses the stock tail light and aftermarket 10mm turn signals. Most 3rd party tidy tails use a non standard tail light and many of them are bad. I decided to design my own tidy tail…
I was surprised to see that nobody had put one of these up here yet. I got several of these Duke Cannon "Big Ass Bricks of Soap" for Christmas last year, and they really need a soap dish to match. See the modeling process here:…
I designed GP wings for the KTM SuperDuke 1290R 2021. Very easy installation: I recommend printing from PA12 or PC Blend Carbon Fiber
These are coasters with two different Duke logos cut into them. One has the Iron D and the other the athletics Devil. I printed both at 0.2mm on my Prusa i3 MK3S+ with a color change at layer 11. NOTE: I do not hold any applicable…
This is my design of a poor man's “power plate”… You can use whatever filter you want, drill or zip holes into it, and use it as you need. OR, you may purchase the Rottweiler Performance intake (red=race) filter, and the holes are already…
A simple clamp that makes it possible to mount your phone in the center of your KTM Duke 790 using a SP connect mount. Just get one from here:…
I printed in PETG. You'll need a M5x20mm hex head screw and nut to attach the license plate holder to the base.
Horizontal stand for the Dukedoks Cramer Truggy , ideal for servicing such as differential repair or for display/storage. The car is held in place by holes for the chassis screws and by cut-outs for bumpers. You will need some M3x16…
This dashboard cover is designed for the KTM 790 Duke . It protects the speedometer display against scratches, dust, and direct sunlight, while providing a clean look that integrates perfectly with the bike. ✅ Compatible with KTM 790 Duke…
Simple 120mm exhaust in 1/10 scale for dukedoks rc car. You can adjust the length depending of what body shell you have. You just screw it on the side of the clamp case holder with one M3x8 screw (the same you use on the other parts of…
This is frame plug for KTM Superduke 1290 R 2017 with airtag holder. I recommend print in TPU.
In my case, when mounting this I found the original KTM display screws too short and so replaced them with some M5 x 12mm Socket Flanged Button Screws (ISO 738002) Stainless Steel (A2) from Accu, along with some 5.3mm x 10mm x 1mm Flat…
Supports: Yes Rafts: No Resolution/Layer Height @ .55mm Infill 100% PETG minimum ASA or ABS preferred ***I would recommend that you split this model in half and print vertically so that the reinforcement of the way the plate prints is…
Original Xbox Duke controller holder for the Ikea Skadis. Thanks to Norm for their Skadis Xbox Controller Holder. Thanks to Wesk for their Xbox Duke OEM Controller Scan
I put this wheel rim together using Meshmixer and 3D Builder. It's not totally accurate but as close as I could get it. It's scaled at 1/18 but scale it up or down to suit your model. If you can I recommend resin printing the wheel rim.
screw cap for ktm duke. (for those using a mirror on bar ends)
I designed these shock tower brackets so you can attach the shocks to the body instead of the upper arm. This gives the shock more use and more stability. You can still use the original shocks that were advised in the guide (98mm I think…
I had some issues with higher power brushless motors stripping out the inside of the pinion gear. Designed this so I could use a standard metal pinion instead of the printed versions of gear_1 and gear_2.…
A cell phone mount for using your phone as a navigation device.
Air Box Cover for KTM Duke 390 (2019-2021) (JP581008) I made 2 versions, one with island and one without. Import the models to your slicer to see the difference. I added the KTM logo in slicer by assembling 2 projects. You can search it…
The original adapter has a large space between the wheel and the adapter. I enlarged the adapter so that the wheels fit
Simple holder to keep ESC regulator in place, could be easy resized to other ESC size No mods in body to mount I suggest to drill a little hole and rod or screw on side Printing settings: TPU 95A: https://s.click.aliexpress.com/e/_EyRSkrF…
A remix of the well known Maker World Clock for all KTM DUKE fans. If you need to buy the clock part on the net just make sure it has a thread length of 13mm. Want more clock designs? Have a look into our DECORATION collection . [UPDATE]:…
A quick remix of the German Empire Duke by Evil Frog. When printing, tree supports touching the base only are recommended. Category: Toys & Games
Dukedoks cramer truggy shock absorber https://cults3d.com/es/modelo-3d/juegos/cramer-truggy-rc-4x4-full-3d-printed
A model of Duke Fishtron from Terraria. no supports needed.
Duke Nukem a pose. Throw him into Mixamo and give him a pose. Cheers. HAAA… I just looked at the Render…. He… may be a She.
It's not always clear whether your average uranium-eating survivalist is planning for the world to end, or planning to end it personally. And why not keep those options open with this special edition Dukes muscle car? Sure, it has the…
1290 Super Duke GT Sidebags Wall Holder
I saw that the screw holes on the TPU Chasis Front Bridge on my Cramer Truggy were getting a beating, so I thought I'd make a cover that would protect the screws holes and look good at the same time, similar to the rear spoiler. PS: I…
New rear axel and axel pulley Hardware needed 16T with 3.175mm bore OR you can use a 5mm bore with a 3.175 to 5mm shaft adapter (this is what i used) 150-152mm closed loop belt 1 m3 heatset insert (used to secure the larger pulley to the…
Lightbox mit aussparung fur esp8266 und 10mm led band printsettings: frame 0,2mm layer high 15% infill picture 0,12mm layer high 100% infill print in 2 colors
Printed with a Prusa MK3S+ with MMU2S in PLA
All my work is based on the cramer truggy : https://cults3d.com/en/3d-model/game/cramer-truggy-rc-4x4-full-3d-printed Ive fallen in love with the idea of a chassi made of TPU so i decided to keep at it with the idea, but i wanted to…
added V2 on 26-04-26 Material Prusament PLA (Pineapple Yellow, Galaxy Black) Better Print in PETG Printer Bambu Lab 1XC with AMS Nozzle 0.4mm Slicer Bambu Studio 2.6.0.51 Walls 1or2 x 0.42mm Layerhigh 0.12mm
Thank you for downloads, likes… Enjoy !
Designed with a GoPro style mount with passthrough for lights and indicator mounts Print with at least 60% infill
Dukes of Hazard Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium Measurements approx.:…
This is frame plug for KTM Superduke 1290 R GEN 3.0. I recommend print in PETG. You will also need a 3 pieces 22 x 2 mm O-ring for a perfect fit.
This is frame plug for KTM Superduke 1290 R GEN 3.0. I recommend print in PETG. You will also need a 3 pieces O-ring 22 x 2 m for perfect fit.
2022 KTM Duke 890 R Tank Fairing Bolt washer Direct replacement with an M6 x 1.0 x 12 mm bolt 100% infill OR 100% perimeters recommended. Use high temp stuff like PETG or ASA or ABS Layer Height: resolution 0.10 mm (or 0.15 mm)
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
Finding OEM parts might be difficult to find outside the U.S. therefore having a temporary option can be useful for KTM users of the 790/890 Adventure/Duke models (up to 2021). I created a 3D model based on the OEM Part 64112181100 and…
Imported from my designs on Thingiverse. Original upload was 13.10.2019 (dd.mm.yyyy) This was requested by Preston1948 Took about an hour to model the rim in Fusion 360. I used a lot of support when printing it face up. Im sure it can be…
This is a prototype of a brake line relocation bracket I made from scratch. The stock brake lines on KTM Duke 890's have a T in them that blocks access to the triple tree stem hole, making using pin style front stands impossible. I use my…
This is a blaster I was working on for some time trying to solve the rotation mech. Eventually I figured out a way to use a rubber band to make essentially a top-off-able hurricane-style cylinder-mag. I’m not happy with the level of…
Most files are the exact same files posted by Kallunke in his original release. The only changed parts are stand, exhaust_front and exhaust_aft. These were split into two pieces. The bottom piece prints without support, the top one needs…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
KTM Duke motorcycle scotch tape holder
Custom-designed screw and frame covers for the KTM 1290 Super Duke, optimized for 3D printing. Adds a clean, finished look while protecting exposed hardware. The set will be continuously expanded with additional covers and plugs that I…
If you like the model, I would appreciate a rating, comment, or sharing your printed version 😊 Thank you
Screw needed is M6 x 50 75% infill - ABS.
4 different keychains for your KTM Duke motorcycle
Print this model sideways so that the most strength in the layers are on the gopro mount. Recommend at least 4 or 5 perimeters and at least 20% infill. Should fit OEM and with OEM hardware. Made for inserting an M5x0.8 threaded insert in…
Uses 4x OEM hardware. Recommended filament PETG or ASA (or better). 2 perimeters is fine, no supports needed.
Getting back into City of Heroes to build my Invention table also opened up possibilities to recreate some of the favorite old mobs and props from the game. In this model we have the Clockwork from City of Heroes. There are many different…
This model is designed for Dukedoks chassis 1/10 servo arm its radius 3mm you can do it with m3 10mm
By slicing at 0.2 mm layer height and strategically placing pause before the top 2 layers, a 2-color coin can be achieved. Also, a pause before 3rd layer can be added to sandwich thick black part in between two thin gold ones.
Adaptador para colocar una bateria de 5200 mah al DKS-PRO, adaptado del gran modelo de Dukedoks Adapter to fit a 5200 mAh battery to the DKS-PRO, adapted from the wonderful Dukedoks model
Duke Earrings Patreon Request 2 Sided version and Flat version (All Versions Untested) are available for Patreon exclusives for the 2 commercial tiers. I print all my earrings and keychains with a .2 Nozzle. If you are using a .4 nozzle,…
Tappo per filetto specchietti per Ktm Duke 390 2017/2023 Stampati in TPU. Si montano a incastro. infill 15% pareti 2 supporti generici( no albero)
I made this model to have a good solution for my shampoo pucks. I originally put them on the shelf of the shower or the can lid but the underside would stay soft and they wouldn't last as long. I've also used just any old soap dish but in…
From famous cartoon: Adventures of the Gummi Bears comes Duke Igthorn. His loayal Toadwart is already here. Toadwart: https://www.printables.com/model/1177556-toadwart-the-goblin-guardian-stoupa Drekmore:…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Gracias a Dukedoks por el diseño antes de nada. Solo lo he modificado para poder imprimir todo el conjunto. Se ha modificado el panel apra poder hacer la tapa con pared de 1.2mm y se ha creado la tapa. El clip para unirlos es el mismo.…
An upgraded board for the Duke: Lord's Legacy game (or any game played on a 6x6 grid). This way I can fail to use the assassin properly in style. For my board, I used Hatchbox wood fil on a Prusa Mk3s. I like the sanding and staining…
Duke Inspired – 3D Printable Miniature Description: Step into the world of classic action gaming with this a inspired Duke Nukem miniature , capturing the legendary alien-slaying hero in all his muscular glory. Posed in a confident stance…
I make this motor mount bracket for belt mod to run with 540/550 brushed motor. It helps plastic withstand high heat longer. Enable muanual support under L shape Print with PC or Nylon You'll need 40x40mm metal bracket Specifications:…
Introduce your model, create build instructions and add print tips... OK! Introduction This another option for body of cramer RC truggy: https://www.printables.com/model/1274256-cramer-truggy-rc-4x4-full-3d-printed Also, I created a small…
Statue of Duke of Wellington Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) See my other Statues here: https://www.printables.com/@StudioMechanik/collections/2993601
I made an oversized version of my other soap dish to fit the DUKE CANNON “Big Ass Brick of Soap”.
Action Figure Duke Nkm a play of a childhood video game hero. Layer: 0.16mm Wall: 2 Infill: 5%, Rectilinear (Or whatever you prefer)
Boční kryty chladiče KTM duke 125- 2014 plnič barva černá
I created this simple little part to see if raising the spoiler/visor on the Puig Touring Screen would make my bike any quieter at speed. The specific screen is here (M&P site, Puig direct somehow never lists this one), although I imagine…
I used Black PLA The link where i find the angels eyes its below: https://es.aliexpress.com/item/1005003226193352.html?spm=a2g0o.order_list.orde use 2 diference size, 10mm and 13mm Duke doks Challenger Body:…
These 2 adapters for the KTM Duke 200 allow the installation of a KTM start number plate! -original Headlight fades away also the speedometer felt away Disconnect the cable only -it will not damage any original parts -coms whit indicator…
Simple and modern keychain especially if you combine it with a Duke motorcycle
I got tired of soap dishes that don't fit the larger soap bars so I made this one. It has a removable grate and a drain hold. The bottom of the inside is also sloped to the drain. I was able to print it without support.
The model was printed with PLA and the Elegoo Neptune 4 Pro. The printing took just over 2 hours at 0.2 definition and 30 percent infill.
I really liked the work done on https://www.printables.com/model/447956-e3d-v6volcano-bmg-ender-3-3-pro-3-v2-5-plus After i printed it off for my ender 3 i noticed that there were less air holes for the heat break than on the previous hot…
🎼 Duke Ellington – Bust This bust pays tribute to Duke Ellington , one of the most influential figures in the history of jazz, a visionary composer, pianist, and bandleader whose work shaped the sound of the 20th century. Inspired by an…
I know a dog named Duke. Everyone knows Scooby-Doo. I present you….Scooby-Duke. Pretty easy print, the gcode has the pauses to change the filament colour. Enjoy.
COMO IMPRIMIR EN VARIOS COLORES CON UN SOLO FUSOR HOW TO PRINT MULTICOLOR WITH ONLY ONE HOTEND Category: Signs & Logos
My LiPo-Battery sometimes slipped to the front inside the chassis and blocked the steering mechanics. Therefore I designed a battery holder with an endstop. It just replaces the original front battery strap holder and also features a…