399 models
I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill. The rubber interface is a nice touch but definetely not required. If you have a round adhesive bumper pad…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
About I was looking to buy a MIDI pedal with a good range of motion and a fairly low price (mainly to control virtual instrument's expression/volume while my hands are on the keyboard, and my right leg is on a sustain pedal). I didn't…
Print approx. €6.03–€7.37 excl. taxPreliminary estimate for one variant
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
Print approx. €9.61–€11.74 excl. taxPreliminary estimate for one variant
Slider repair kit Fits: DT 790 / DT 797 DT 770 / DT 770 PRO / DT 770 PRO HT DT 880 / DT 880 PRO / DT 880 PRO HT DT 990 / DT 990 PRO HS 200 Dyn / HS 200 Rotor / HS 200 Trend HS 400 MMX 300 UPDATE - 30.10.2022: Some slight fine-tuning.…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Introducing a 3D print model that reimagines the art of typography, providing an innovative way to communicate messages. Our distinct letters, printed at angles, offer a captivating and creative approach to presenting text that you can…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
I wrote an article with testing results about this: https://www.igorslab.de/en/o11d-hdd-cooler-2 This is a Remix of Thingi 4923606, but made to fit the regular O11 Dynamic and not the XL Version. Two 60x25mm fans fit inside, I suggest…
Print approx. €5.55–€6.79 excl. taxPreliminary estimate for one variant
The General Dynamics F-16 Fighting Falcon is an American single-engine supersonic multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). Designed as an air superiority day fighter, it…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Halterung für die Corsair XD5 Pumpe im Lian Li PC-O11DX Dynamic Midi-Tower In 2 verschiedenen Größen h=60mm und h=93mm Lochabstand für Befestigung im Gehäuse 80mm x 80mm Bracket for the Corsair XD5 pump in the Lian Li PC-O11DX Dynamic…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
This is concept design and I have tested by myself. I think there are many possibilities to use but also to change and to remix my design. Maybe you are interested, then you can also find the .step-File attached. Have fun to organize your…
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for PETGSource material: PET
General Dynamics F-16 Fighting Falcon
Print approx. €5.63–€6.89 excl. taxPreliminary estimate for one variant
Back connection cover. For Wago. 221-413 WO Logo.
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
Pulley Puller for Dynamic Range X1 Parts: 3D printed beam (1) M3 x 3mm Thread Insert (CNC Kitchen) (1) 15 x 3mm socket head screw
Print approx. €2.31–€2.83 excl. taxPreliminary estimate for PETGSource material: PET
Ultralight High-Performance Boomerang V4 (No Holes) The upgraded V4 edition of the iconic ultralight boomerang, engineered for maximum flight stability and impressive range! Weighing in at under 18 grams , this high-performance boomerang…
Replacement sliders for Beyerdynamic DT 770/880/990 headphones. Yes, you can buy original replacement parts – for an insane price! Also they will break after a short time again because they are just too fragile. This is a remix of…
Last update : 2025-11-13 Version 3: Added embedded M3 nut for attaching swing to top cap Simplified openscad code for easy customization Online customizer Version 2: Changed top cap connector to use m3 screws Fixed clearance issues…
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
I love my headsets from beyerdynamic but sometimes I am really fed up with the prices of spare parts and how flimsy they are, I regularly change ear pads, cables, headbands and sliders. So I designed those from scratch to be tightened…
Remix of a remix of a remix, I really wanted the replacement to be as similar as possible to the original part, so I added a Beyerdynamic logo and L/R indicators. IMPORTANT: Printed with a 0.25mm nozzle using Prusaslicer 2.5 with Arachne…
Experience the thrill of supercar engineering with this 3D printable STL model of a McLaren Sports Car. This aerodynamic performance model is perfect for automotive enthusiasts looking to display the sleek design and exhilarating speed of…
This is a set of blocks that can be used to recreate the Batman and Robin figures that were part of the Batcave set from 2012 at 500% scale. We've included stl files to create both figures along with some of the different accessories that…
Spare part for beyerdynamic headphones dt 990 / 770 / 880 pro. This beyerdynamic headphones are my absolute favorites, but after some time the plastic parts one the site tent to break. I made some spare parts for that, it should be pretty…
Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2
Final (likely) evolution of my attempt at creating a printable water pump. This pump is a dynamic pump, as opposed to my previous positive-displacement pumps, and performs much better. It also does not require sealing with a 3D pen to…
The original broke so I printed a pair of those brackets. The cable (connecting left to right speaker) constantly moved between bracket and my head, resulting in uncomfortable pressure points above my ears. Therefore, I remodeled the…
A quick project which is a replacement for Beyer's shitty plastic side brackets that attaches the speakers to the aluminum forks. I've had two sets of these break over the years, on two headphones. The plastic crumbles over time and snaps…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
This print allows for an O11 Dynamic XL case to be lifted 55mm of the ground. It fits over the existing feet without modifications. The design of the feet allows for just printing the design four times without mirroring. Printed with 20%…
Update 11/19/2025 - Recent request for the outside slider cover, so I decided to go ahead and add it in. I also did a mild update to the inside slider cover. I think I can do a better job but if this means someone's headphones work vs…
My Cura settings (settings with * are ones I've found to have a large effect on the quality of the print) Hatchbox Light Grey PLA *Temperature: 200 C Build plate temperature: 60 C *Layer height: 0.09 mm Line width: 0.4 mm *Support line…
Need more airflow without modifying your case? No problem!! Print 2 of each O11 Dynamic evo feet Alt.stl X2 O11 Dynamic evo feet.stl X2 i Printed on Anycubic Vyper 3 walls gyroid infill 20% infill
So you want to know what fan speed is best? You can test optimal print fan speed with this tower. You MUST use newest PrusaSlicer and use the fan speed settings in the photo, slice at 0.2mm layer height. I recommend using a large brim…
This striking black panther figurine captures the power, motion, and elegance of a panther mid-leap. Crafted using high-quality matte black 3D printing filament , the smooth surface and flowing lines emphasize the dynamic form and…
Capture the vibrant energy of a powerful Demon Slayer with this 3D printable STL model of Mitsuri Kanroji in a Dynamic Pose. This striking character figure is perfect for fans looking to add an action-packed piece from the beloved series…
Glass spacer for the Lian Li pc-o11-Dynamic. This design was created to all for horizontal mounting of 3000 GPU's in the Lian Li pc-o11-Dynamic with a water block. Hope it can help someone out! Print Settings Printer Brand: Prusa Printer:…
I remixed this to put it in the O11 Dynamic non XL version. Now there are two fans channeled together in a single duct. The height is matching if you put the fans on the backside of the mounting point of the case (the side with the PSU…
Bring cutting-edge robotics into your collection with this detailed 3D printable STL model of the Boston Dynamics Spot Robot! This advanced quadruped, known for its agility and sophisticated design, is perfect for tech enthusiasts,…
LITHOPHANE STAND BASE WITH DYNAMIC ANGLE FOR IKEA KAPPLAKE Nozzle: 0.4 mm Layer height: 0.2 mm Print speed: 40 mm/s Infill: 20% Supports: no Filament used: ~15 grams Print time: ~2h Remark: The stand is suitable for litho models with a…
There's a couple commercial options for an airflow focused panel for the o11 Dynamic XL, but they're expensive. Other panels I could find are all for the o11 evo or standard. So I made this, it's designed to fit on a CR10 or similar sized…
Profile: Standard Quality Filament: Generic PLA Settings: Quality Layer Height: 0.2 mm Line Width: 0.4 mm Walls Wall Line Count: 5 Top/Bottom Top Thickness: 0.8 mm Bottom Thickness: 0.8 mm Infill Infill Density: 20% Infill Pattern: cubic…
In this remix combo I’ve designed a Creality K1 door handle cap that matches the hinge it was inspired by. It comes complete with a choice of static or dynamic gears on either side. Filament: Creality-Hyper PLA (Black) Slicer: Creality…
I designed this model for a friend who bought real Slovak ultralight plane. Learning by doing project - 3D modeling from blueprints.
The flat bed is ready for mounting magnets with a diameter of up to 88mm/m8 or using the side threaded rods m8 on the roof rack. There is a passage for a cable or for mounting POE from Mikrotik in the back. The entire starlink is covered…
In this house we obey the laws of thermodynamics! Category: Signs & Logos
This is my first remix. I thought this would be a perfect use-case for the new text options in PrusaSlicer v2.6. Everything is setup in the 3mf file. Stick: Prusament PETG Galaxy Black Label: Prusament PETG Pistachio Green Font:…
This will bracket will allow you to mount Diode Dynamics SSC1 LED Pod in place of OEM FJ cruiser mirror light -The Cover will fit both the Driver and Passenger side, but the bracket the side specific. *Note: This will require running new…
They work perfectly fine and snuggly fit. My recommendation is to print them using PLA+. My Settings are listed below: Layer Thickness: 0.28mm Infill: 50% - Cross 3D Print time on a Ender 3 Pro with a mainboard upgrade and BL Touch: 11…
I bought a chonky noctua CPU cooler for my 011D only to realize my smooth brain never checked the dimensions of the cooler against those of the case… so here I am making an adapter that moves the side panel out roughly 17mm. ENJOY :)…
Sorry for the garish transparent red PETG example print! It's all I had left haha. There are a selection of 30mm diameter gears and 50mm diameter gears for you to mix and match. I highly encourage you remix and try new designs using the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Use typical M3 threaded inserts along with M3x8 bolts.
Included are 5 simple wind tunnel test articles for the Modular STEM Wind Tunnel , intended for use with smoke visualization to concisely demonstrate the concept of streamlining and show how the wakes behind different geometries can vary…
Junction box for wago 221 2411. The numbers of connector can be set by changing the value of user parameter [long_connectorn_number]. The hole in the bolt can be changed up to 7mm by modifying the value of user parameter…
You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…
Still one of the best fighterjets. The XL could be the ultimate F-16 (IMHO). http://www.codeonemagazine.com/article.html?item_id=37 https://www.airforcemag.com/article/1183f16xl/ the green one is a remix:…
If you follow the instructions, you will have a perfectly functional model, the 3mf file is optimized, any changes you make can affect the final result. the first thing to do is to print the plate that is on plate 2, it is essential to…
Simple, but dynamic column builder library. Inspired by: Wikipedia Artwork and this preview . I've uploaded a couple ready-made column design as stl files, but you probably want to download the .scad file and open it inside OpenSCAD .…
A dynamic female figure captured mid-trick on a skateboard.
A heavily revised version of the Stringer Mega Masterkey by Bruce LeedleLeedleLeedleLee that is specifically designed and tailor fit to act as an underbarrel attachment for the NSK-X blaster. This has a special grip portion that sits…
I created a Yo-Yo that is a step above the cheap ones you may find for only a couple of dollars. This Yo-Yo is designed with quality in mind, and similar to the professional-grade Yo-Yos that were incredibly popular in the 90s. Unlike…
I wanted a way to hold my headphones near my PC while not in use. After trying several designs, I ended up desiging this. Pretty Happy with the result. It works very well.
Designed for the LeedleDynamics Corsair ( https://www.etsy.com/listing/1509623188/corsair-break-action-single-shot ), but will likely fit lots of blasters with Picatinny rails. Intended to hold half-darts, but will likely hold most…
The Ocean Wave Sculpture captures the powerful motion of a curling ocean wave frozen in time. The sweeping curve and layered water flow create a dynamic sense of movement, as if the wave is just about to crash forward. Smooth flowing…
This mod is an upgrade for my original Dynamic Balance Mod. See PDF
Since the original sliders regularly break in the same place and the original replacement part is only available as a set with rockers and screws, I have tried to design a more robust version of the slider housing. Even if they break just…
this 3d design connects to the top of a 5a drum stick to help with finger control. This will help you play faster
4 separate risers included in file. Fit under the existing case legs and front IO module (in standard orientation.) Printed in PLA 0.32mm layer height 0.96 wall thickness 20% infill
May work as a push fit, however it is recommended to gluen a spare valve cap into the end of the cover, to ensure it stays on at speed. No liability accepted for any damage caused by the cover coming off during a ride, although this has…
Lian-Li O11 Dynamic Mini Panel Spacers created to space out side panel approximately 0.5in from case frame. Created for side panel although you can print out the top holder 4x to space out the front panel as well.…
Created the General Dynamics F-16 Fighting Falcon wall art model by creating a SVG file. Then importing the SVG file into Fusion360, then editing and creating the STL. Printed on the Creality Ender 3 Pro and the Creality K1. I am printing…
As requested by another user, I decided to post the SketchUp model file I use to build/measure most my printer parts off of. Most of the printed parts are copies of STL, OpenSCAD and DXF releases from original Prusa Git. License GNU GPL…
With the help of Chunks3D, we were able to size and modify the model to fit my car's center wheel caps. We upgraded the parts to stainless steel variants on Amazon, used 608 2RS Ball Bearings, added threadlocker to screws, and double…
Propeller designed for aquarium or rc boats, internal diameter 6,9mm, 7mm fitting
So yeah, troubleshooting random crashes, short version, removed all the vertical graphics card hardware (didn't solve the problem) and wanted something to fill the empty slots that wasn't using all the screws and kept dust out a bit…
This is a replacement for the DT990 slider housing that I modeled after mine cracked. Beyerdynamic offer a replacement part for sale but I didnt want to pay as it was simple enough to model. Print both sides with the flat face down…
ABOUT THIS MODEL: 2022 Subaru BRZ Fog Light Brackets for Diode Dynamics SS2 SAE Fog Lights After 2 months of development and 5 revisions of this design, I now have the “final” revision printed and mounted on my 2022 Subaru BRZ (as of this…
By default, the filter is placed very close to the panel, reducing airflow and increasing noise. This spacer mounts on the existing pins/slots without requiring any glue / adhesive, and adds 6mm of clearance. The model is actually split…
Print without raft or supports.
Slightly modified version of Volans design to make it fit a little bit better and give it slightly more notch-feel. Tested on my DT770 Pro headphones and now they feel exactly the same as the original ones. I printed them with a 0.6mm…
This cradle is supposed to hold the DJI O3 Air Unit. Two of the mounting screws of the air unit need to be replaced with slightly longer ones (M1.6). The cradle itself attaches to a modified “fuse1” part of the Micro Talon. I'm using four…
A few words about the project (joyfully added in the last minute of the Make It Fly contest - still warm files) Two propeller launcher base designs are included - you choose which one to use. For small printers - short toothed bars…
In order to calibrate the SPL readings of your Beyerdynamic MM 1 measurement microphone, you need an acoustical calibrator, like the iSEMcon SC-1. However, the MM-1 is an odd duck: It has neither the common ¼" or ½" microphone head…
Finding a mount that perfectly fits the unique aero seatpost of a Pinarello F5 can be challenging. I designed this custom mount to provide a seamless, secure, and aerodynamic fit for Garmin Varia radars (and other devices using the…
This is a remix of an awesome design by @benproductions on thingiverse. All I did was edit the seat post adapter in order for it to be able to fit my 2012 Cervelo P2. I will attach the onshape files I used to create the seat post below so…
A replacement slider assembly for Beyerdynamic T90 and T70 headphones. Looks like it will probably fit T1/T5 and others.
i have made these Mazda miata mx5 aerodynamic canards for my car to have a little more downforce
16-06-2026 Add V2 of the front and base pieces, to refine how the pegs fit together. Add printable pull-tab labels that can be attached to the ends of the cords to label the muscles 16-05-2026 I turned this model into a full kit you can…
Added negative cubes to modify the print for ROG edition O11 XL cases. I used the same print settings as recommended in the original. No supports needed. Made in Orca slicer, if that matters.
A figurine of an anime-style girl in a boxing outfit, captured in a confident pose. The dynamic design reflects strength and determination while keeping a cute, expressive charm. Perfect for fans of sporty or strong female characters.
A fully parametric spring optimized for 3D printing. Modify just a few main parameters, and the geometry adapts automatically. To be able to change parameters, go in timeline between the groups. Change Parameters. Go in timeline to the…
SEE PDF FIRST. Mod uses McMaster-Carr parts. Print settings: .15mm layer height 3 walls 25% infill no support needed Feel free to ask questions here or IG at jd_sandman.
Pokud se vám model líbí, budu rád za váš like. If you like the model, I would be happy for your like.
A miniature model of Legendary F-16 Fighting Falcon, Enjoy Printing (¬‿¬)
Introducing my entry for the beach competition: the Dynamic Splash Phone Holder! Designed with both functionality and style in mind, this innovative phone holder combines practicality with a splash of flair, perfect for the beach. Why It…
adapters for bigger earpads 90mm
General Dynamics–Grumman EF-111A Raven Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Expressive/dynamic hand compatible with lego ball joints, i thought would be useful. In the photos the print has primer sprayed on top. Probably any print orientation requires supports so keep their placement in mind. I printed the hand…
This is a modification based on the Lian Li Additional I/O Kit that allows the Startech USB 3.0 Internal Multi-Card Reader to be added to the Lian Li O11 Dynamic EVO case. Remove the metal shell from the Startech card reader and install…
I made a little stand for my Funko Pop Jollibee guy. You could mount pretty much anything on it that's similar size. It sits inside the original Lian Li PC-O11 Dynamic midtower case above the Der Baur badge in the back. The mounting holes…
Vent covers to help direct cold air to components and hot air out of my Lian Li Dynamic Evo computer case. This case has hexagon vent holes and since Lian Li is awesome they share the full CAD model on their page . Ctrl+F and search for ‘…
