206 models
CArts Little Acro EDF-Version Span: approx. 1200 mm Body length: approx. 720 mm Take-off weight (LW-PLA): approx. 600-650 g Drive: EDF 50mm diameter Propeller : folding propeller Battery: 3S Lipo 1000 mAh Controls: elevator / rudder /…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
En plus de la serrure (Voir https://www.prusaprinters.org/prints/123226-serrure-pour-porte-de-compteur-edf) une des charnières de la porte de mon compteur EDF était cassée et la porte ne fermait plus. Je me suis donc lancé dans la…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for PETGSource material: PET
La serrure de mon compteur EDF était cassée et la porte ne fermait plus. Je me suis donc lancé dans la modélisation et l’impression des pièces cassées : le pêne et l’axe d’entrainement du pêne. Le boitier n’était pas abimé Prise de cotés…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
A small adapter to clip onto smaller LED lights/fairy lights/light chains that fit the beautiful rose lights diffusers from James Brown's Rose Lights . Made to friction fit the Ledfyr LED lights from IKEA, slight adjustments in size may…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
15% infill no supports 200mm/s 11 hour print
Print approx. €9.69–€11.85 excl. taxPreliminary estimate for one variant
I've seen various star wars crests and sigils, but nothing for the boys in blue. I made these with the intention of printing them after scaling down with the slicer and using a 0.25mm nozzle. The STLs are much larger so these can be…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
!! At the time of upload i have not yet flown my first prototype, there may be design changes based on test flight results !! The current thrust line is identical to the real world A-10 and will result in a pitch down moment when power is…
You can use a 3660 4s Brushless motor. The connection betwen the prop and the motor is a Gt2 Pulley with pressfit. You should print the whole Thing in 0.2mm and a fibre reinforced Material. The Flow corrector gets glued to the back of the…
Simple design of a 3D printed EDF and a few different fans including toroidal fans used for testing in the video above. To learn more about the project and results watch the video above! Recommended to print everything with PETG. Happy…
I used a 2204 2300KV brushless motor, actually, it's not tested, i'm making tests to see if it works. 15 Blade propeller.
An upgrade to Monorim MX0 to allow stable rides without wobbles way beyond the 100kmh barrier. Needs sheetmetal manufact
This product contains the 3D model in OBJ file format only. The OBJ file contains the high-detail geometry mesh. It does not include embedded colors, textures, or materials (MTL), providing a versatile base for custom finishing, painting…
Modeled this in a couple hours for my own Chris Redfield cosplay (Resident Evil 1) figured i might as well share it for everyone to use the knife is split into 4 parts to make printing, sanding and painting easier
This Project contains the files for my “SN-6” F-111CSB Prototype. It has already been flight tested successfully. Specifications: Channels: 3-4 Wing Span: 83cm Weight: 600g (300g printed parts) Thrust: 700g T/W Ratio: 1.17 Battery: 4S…
Prototype of a variable-area nozzle for use on EDF RC airplanes. More info about the original build can be found here: https://imgur.com/a/Njsps6G . Keep in mind this is a prototype meant for testing the basic design, and as such it lacks…
You need 6 Screws M3x8 , Servo-Tester-Board, Brushless Outrunner 2838 (Front Mounted!), Small ESC, Mini Power-Switch 9 x 13 mm. Maybe you have to adapt the hole in the Fan for the Motorshaft.
I just modeled my EDF to better be able to sketch on a project I'm doing
3d model of an electric ducted fan for RC plane. Modèle 3D d'un ventilateur électrique canalisé pour des avions RC
This is a thrust tube for a Dr. Mad Thrust 70mm EDF and designed for high speedsot an aerospace engineer, but i tried to design it as good as possible, and after schübeler's description on their website:…
The original ring holder is too flexible. I have destroyed 2 impeller blades with the original impeller holder My ring / housing is more stable. Prints with 100% infill EDF / Impeller Typ QX- Motor 30mm 6 Blades EDF -Einheit mit QF1611…
EDF printed because the original one was a little bit too small Internal dimension is 65mm instead of 64 to prevent rubbing but I see some space between wall and propeller, so I think it can be lowered about 0.5 and still fit without…
90mm EDF 12blade Propeller. I recommend printing it from stronger filaments like : PETG , Nilon , Carbon reinforced nilon ... Category: Other
90mm EDF Recommended motor : 2826 ( i have 1000kv(it have around 70-100g trust) - its too low for EDF i recommend higher kv motor for higher revolutions) With this trust it cannot be used in model airplanes . I recommend have it like a…
Was going to install on a plane, but didn't want to disassemble it to install. Its made for a 64mm edf but could most likely be scaled up or down for a larger or smaller edf. Will require 2 servos, I'd recommend at least 9g if using a…
Clé pour coffret de compteur EDF. Permet d'ouvrir et fermer le boitier contenant le compteur EDF extérieur. A imprimer de préférence en ABS pour la solidité.
I've always hated the look of the exposed extrusions by the deck panel. It was unsightly and plastic boogers always find their way in there which was a pain to keep clean. I wanted to cover those, but also wanted to cover the gap between…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
EDFX Mini-IFU Updated my AliExpress RGBS AV Booster model to fit Krikzz' new (and better) EDFX ! Printing You'll have to see which version of the mid-section (Connector_Bottom) you'll want to print. I made 2 versions (can be found in the…
Didnt print or test out anything yet, just recreated the hardware with some reinforcement. also included are the Fusion360 files. Spots for wood slats are sized for 1.5in. Dips for the ratchet straps are 1in wide. You can find info about…
Installing the bedfans in the rear of the printer makes the air circulate more in a circle when combined with a nevermore micro. Combining two rear bed fans at 20% speed and a nevermore 0.5 at 60% speeds, I reach 30C chamber temps before…
A headrest for bedframes and mattresses works with both professional headrest pillows, travel pillows and rolled up towels. Can be disassembled for storage and transportation. Attention: For the bedframe mount you ll need to check your…
This is a keychain based on the Riddell Speedflex Helmet. The keychain includes a facemask, and a clip for a chinstrap. There is also a built-in hole for a keyring.
Tisknuto z PETG, výška vrstvy 0,15
I designed a holder for a 70mm EDF (impeller) and 80mm EDF You will find 4 versions with different holders The original holder was made of wood and after a hard landing is broken I use this for a RC model from VQ, Sonex (Hornet) My EDF:…
This also includes a nose cone
Designed this around the QX-Motor 30mm EDF 7000KV For the FMS Alpha Free Flight Airplane https://www.horizonhobby.com/product/free-flight-alpha-red-kit-467mm/FMM073RED.html . Intake area is slightly more than EDF. Exhaust area is about…
This bracket fixes the extended nose wheel in an AvantiS RC model from freewing. It stabilizes the landing gear. The component is hollow inside and has an edge to glue. The distance of the bracket between nose wheel and model is 15mm and…
This is a remix of Nikodem Bartinik's Toroidal EDF . It is designed for an A2212 motor and the fan blade has been modified to fit the included hardware. I took off the rotor from the motor to make it easier to assemble. You can find an…
If you would like to support this buy the plans on cults for $0.65: STL file Falcon X 50mm EDF Optional FPV RC Airplane 🛩 ・3D printer design to download・Cults
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
This replaces the stock Fox Racing Speedframe GoPro visor mount with one that uses zip ties. I recommend printing in TPU 95A at .16 Optimal with 5 wall loops (P1S). This makes the upper part solid, but allows the bottom to conform to the…
Not sure if this will work for printing, mostly made it for the modding community and to use in body tracking applications. I only rigged the model, I did not make it. I'd appreciate if you credit me if you use this for something, but if…
EDF / Impeller Typ QX- Motor 30mm 6 Blades EDF -Einheit mit QF1611 7000KV Brushless Motor Outer diameter of the impeller: 34mm Durchmesser Brushless Motor : QF1611-7000KV Category: R/C Vehicles
Video Games - Resident Evil 5 - Jill Redfield - 2009 3D printable model.
Couldn't find a good mount for my helmet/light combo. So instead of using a bunch of zip ties or twist ties, I modeled one in Fusion 360. It's a flat style GoPro mount that sticks on with double sided tape where the vizor meets the…
Capture the resilience and determination of Claire Redfield with this stunning figurine from Resident Evil 2 . This model features Claire in her iconic "Made in Heaven" jacket, ready to face the horrors of Raccoon City in search of her…
Just a simple thrust tube for a Dr. Mad Thrust 50mm EDF . It has an 8% Diameter Reduction at the exit which should give you a good mix of speed and and torque. The tube is 50mm long and there is an extra 20mm that couples it to the EDF,…
If you have some 64mm EDF and you don't know what to do with it, this thing is just for you. WARNING!!! With 1.5kg of thrust it can not only ignite a firewood for your barbecue faster, but even blow out some light wood. So please be…
This is a 3D reference model of the Powerfun 64mm Electric Ducted Fan (EDF) , created as a visual and sizing aid for use in CAD and RC aircraft design work. It is intended to help with layout planning, fitment checks, and general scaling…
0.2-.3mm, 5% infill, PETG, but you can use whatever filament you would like. Fit like a glove. Glued to foam with foam safe CA. Slight friction fit on front of EDF. Used a small amount of glue to install EDF. It is stout so can probably…
Not sure if this will work for printing, mostly made it for the modding community and to use in body tracking applications. I only rigged the model, I did not make it. I'd appreciate if you credit me if you use this for something, but if…
Version 2 of my headrest for bedframes and mattresses works with both professional headrest pillows, travel pillows and rolled up towels. Now more sturdy and and with a lip to hold towels and travel pillows in place. Can be disassembled…
Wing Fence for Freewing Avanti S EDF RC Jet I have printed in PETG and is flexible and does not break A file for milling is also included
Resident Evil Series - Characters - Claire Redfield
Improved the molle mount for stronger hold. You will need two M3 square nuts. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Infill: 50 % Filament: Das Filament PETG Black…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
For french resident, this is a lock from the standard EDF and GDF box. It requires 3 M4 20mm screw. Print instructions No special instructions. I printed it with my Prusa MK3S, in PLA (SUNLU PLA+), height of 0.2mm
Thrust Tube to fit 50mm WeMoTec EDF unit Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.4 Notes: Extruder Temp 205 Bed Temp 60 How I Designed This Category: Vehicles
You need O-rings ID33x2,5 mm, ball bearing MR 128 8x12x2,5 and MR 128 8x12x3,5 ZZ. A servo: MASTER Servo S308. The Cam may need to be adjusted in size for optimal balance between brake force and the torque of the servo. The servo isn't…
Feel free to watch asambly and testin video https://youtu.be/xMcrFVaUADM?si=JSFuACHDyYXw5Kiq Part list. M3*12 + M3 nut. A2217 3500KV brushles motor . 40amp ESC + servo tester 14.4v 1.5A makita batter ( BL1415G ) note: lower the Z by -3.65…
First of all, a big thank you to Matt for the outstanding development work on the world's fastest printer (accelerated by Volgger to WR), the T250. On the T250, the four legs are so high that not everyone can print them. I split the legs,…
Motor mount for 45mm EDF type AF45314B, prints without supports. Designed for LIDL chuck glider conversion to RC EDF plane Glue the EDF in the 3D-printed mount using the glue slots. Glue the mount into/onto the plane, cutting two slots…
Adapted RC hovercraft by Snowman to EDF 64. Please check his excellent details and video for more information. These are only the changed parts to fit EDF 64 instead of 70. REMARK: not tested. Waiting for parts. If you are brave enough to…
Resident Evil Series - Characters - Chris Redfield
its a remix from the Stealthburner frontmask to use it as a Bedfan, for the Voron V2.4 NOT TESTED YET. Bedspacer must be around 22mm. It is a left ,right and a middle with 2 fans there. Housing is for all of them. Assembling schoud be as…
Scaled down XY to fit push-fit connectors for 10mm JG Speedfit pipe. A size commonly used in the UK for central heating and low-flow outlets (e.g. sink taps/toilet cistern) Would advise printing in PETG or ABS for use on central heating…
Aerodynamically designed ducted EDF motor mount for the “40mm Hobbyocean EDF”. Designed for LIDL chuck glider to RC conversion, but suitable for other models as well. Print without supports, optionally a brim if you prefer. The motor is…
Leesherm takes the cake here - its a great shelf. I Remixed it to fit a 2x4 bedframe (I build a triple bunk bed myself, and the frames are all 2x4's (...which are actually 1 1/2 x 3 1/2, but whatever; Thanks wood industry). I used a…
These parts are designed for the FreeWing Fa-18C 90mm EDF. These are scale parts to replicate the forward fuselage vents, louvered vents and antennae. You MUST preform ‘foam surgery’ for many of these parts which will violate MotionRC and…
Water Refill for Thedford SC400. In case you have loosen your refill nozzel for your water toilett in your caravan/camper here the printable replacement. I found some spare desing's on other plattforms but they dos'nt fit on my toilett. I…
Stihl trimmer spacer for echo speedfeed 400 head Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 50% Filament: AMZ3D PLA Black Category: Parts
A printable EDF 4.1 Fencer helmet, pre-separated for your convenience! There is a “neck test” you will want to use so you don't waste a ton of filament and time printing a helmet that's too small, as the neck hole is almost certainly…
It my 40mm edf engine for RC planes and i maked him under small brushless motors
This part fits the underside of the wing on the FMS Futura 64 EDF and covers the exposed aileron and flap servo horns when the landing gear is removed for belly landing configuration. I've also added a matching front skid for those who…
This design produces maximum thrust. Optimally designed.
This printed part helps you landing with FMS Futura 64mm edf. Front landing gear stay straight also in hard landings. Looks nice:-) Use rubber liquid glue to attach, its great! Shoegoo, Bison or similar Good material: ABS or Petg, Tpu and…
50mm edf nozzle great for rc plane or boat
Need a holder for all your small accessories that you might need right before sleeping? You wake up with dry lips and don't want to search for your lip balm in a drawer or from the bedside table where you accidentally tip it over and it…
Needful Things - 1993 3D printable model. Prints in two parts. The big scene, and the two small men fighting. Size everything to your needs and print!
Backplates for your Voron 2.4 that block hot air out of your bedfans from blowing onto your ACM panels to (slightly) improve airflow and temps. Also a nice way to showoff Voron branding and the serial of your printer. I noticed a hotspot…
Strongly connected to EDF Housing model: https://www.printables.com/model/578828-edf-housing-for-64mm-blades-64-645-65mm-internal-d and QF2822 engine (linked there) Number on the end of the file name is a diameter on the end of the tube
This Bedside Table mounts itself to the side beam of Beds. The slot is Angled to Clamp to slightly differing Sizes, but around 28mm is Optimal. Adding some Anti-Slip Furniture Pads to the inside of The slot achieves a really satisfying…
Return to where the horror began with this classic figurine of Chris Redfield from the original 1996 Resident Evil . This model faithfully recreates the S.T.A.R.S. Alpha Team point man in his iconic uniform, ready to investigate the…
I designed this mount to hold the EDFC controller from tein. you will need 3 small screws to mount it to the dash. Designed to print with no supports. Slanted model angles the controller to be more level for the gyro. To install simply…
The mechanized infantry squad is the core of Redfor's army. Their GPM-S Anti-Tank Guided Missile knocks out any armored threats, while the other seven members of the squad capture their objective.
Spacer to adapt speedfeed 400 trimmer head to Husqvarna or Stihl trimmer
Want to turn an ordinary WLToys 144001 or 144010 RC Car into one not driven by its wheels, but by an extremely powerful Electronic Ducted Fan commonly used in RC Airplanes? Here are the 3D files you need! Also check out this video I made…
Replacement Wing Fence for the FMS Avanti S. OEM replacements usually show up warped, they are made of some sort of fiber board. Print with PETG, so you don't have to worry about direct sunshine in the summer months. Stock one weighs 11…
Printed upright with no supports. Printed originally with PLA. Part to fit bed frame is 31mm. To fit to your bed frame use cross multiply. ['your measurement' * 100% / 31mm]. This will give you your percent scale factor. REMEBER if you…
"Sorry about this, Ethan." Step into the shadows of the Romanian countryside with this definitive 3D-printable statue of Chris Redfield as he appears in Resident Evil Village . This model captures the veteran operative's most brooding…
Holder for CPAP mask to mount to a bedframe (up to 28mm in width). I needed a way to store my CPAP ResMed full face mask on the side of my bedframe instead of just having the mask resting on top of the drawer. This mount works for any any…
KLepší verze původního předfiltru
IDesigned this for the Hyperflow 56mm EDF. Used recommended exhaust area for efficient thrust amount. I used two layers @0.3mm and 5% infill. Can be printed with whatever you would like.
Hanger to be mounted on bedframe for a roku remote and a fan remote.
A pair of these mounts will secure a VESA compatible TV or display to the face of a wooden board or similar object. With the settings I've provided, I would trust this to hold a 20 pound tv, and depending on parameters it could hold much…
Had to make a very specific mount for our baby crib. The headboard is 22mm wide and this mount simply slides on. You will also need the original mounting plate, two M3 head set inserts and M3x8mm bolts to mount the camera. Note: This…
The bracket is intended for holding a Hue remote on a 2,7cm thick bedframe. The remote fits perfectly into the cutout and is hold in place with a little round 10x2 mm magnet. The model is very specific for the thnickness of our beds, but…
Needful Things - Buy Now, Pay Later, License Plate Frame, Stephen King Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
