WALL/DESK CLOUD LED BEDSIDE LAMP
Arduino code on GitHub: https://github.com/SRRychter/Cloud.git
- Downloads
- 470
- Likes
- 128
- Rating
- 5
1,592 models
Arduino code on GitHub: https://github.com/SRRychter/Cloud.git
Lightweight and sturdy phone holder to put between bed frame and mattress.
I wanted the bedside table catchall from the thumbnail of the catchall contest, but it didn't seem to exist, so I made it! A few small modifications to fit the shelf in my headboard, and a spot to put spare change, or in my case, earplugs…
Bill and Teds Phone Booth Time Machine. Attention!! the gcode is for a .6 nozzle at .3mm layers. If you want to use a .4 nozzle you will have to load the .3mf file into your slicer and slice for that nozzle at .15 or .2 Im not sure if the…
My daughter sleeps in a High bed, and therefore hasn't any nightstand to put the alarm clock. So I made a small shelf that fits on the sideboard of the bed. I printed in PLA but split the piece in half and then glued, just to prevent…
Printed in two sections not requiring support, with interference fit that also negates glue. I printed the example at 0.28 layer height with two walls and 20% infill. I think it would be better at 0.20 layer height with four walls. Later…
Bedside shelf that fits 3cm boards in the base version. Please ask for a fitting model for your bed board size. The phone holder slot is 18mm wide and should fit most phones even when using thick casings like the leather one shown in the…
A simple yet effective tool designed to make cleaning your 3D printer build plate faster and safer. The flexible handle provides just enough give to help remove stubborn print residue or thin first layers without damaging the surface.…
I know there are similar bed scrapers here but I wanted my own one I designed so here it is feel free to use it and make remixes
I wanted to grow my bee-friendly-area of my little apartment garden, so needed to get the seeds from the plants. I needed to sort seeds from the dry plant residue and saw the empty spool in my workshop. You can use it for whatever, I made…
bedside table for Ikea STORÅ bunk bed printed in PETG 60/70 % infill
Les cannes RTK sont généralement en 32mm de diamètre et pour utiliser le trépied D-RTK2 j'ai besoin d'un rod d'extension <30mm soit 29,90mm pour être précis. Cela me permet de fixer la Canne D-RTK 2 sur une canne GNSS classique grâce à un…
These pieces will allow you to run the KTM headlight (I believe the year range is 2017-2022 on this style KTM mask) on Alta motorcycles already using the KTM front fender fitted to the stock Alta triple clamps. Also allows MX and MXR's to…
I got tired of losing the remote in the bed. Designed and printed and problem solved. Simple solution to age old problem! Printed on end, no support needed. I did print with a brim, but it is optional. Useful in many situations.
Bedside phone holder for 3 cm bed frames -------------------------------------------------------------------- Max phone dimensions: 3.5 x 8.5 cm Inner height: 10 cm -------------------------------------------------------------------- On…
This is a organizer designed to hook onto the side of a bed. It has a hook for keys, a holder for smartphones with a hole for a charger, a holder for airpods with a hole for a charger, and a holder for an applewatch gen 3 and its charger.…
Based on "PLAzzy, 12V LED Dog Lamp" https://www.prusaprinters.org/prints/20323-plazzy-12v-led-dog-lamp I designed this bedside lamp. I have tried to capture the working steps and the assembly in photosl For this project you will need: 1x…
I think the eibos cyclopes is great. Only the supplied bearings were much too stiff for me. The holder is inserted into the existing receptacle. I installed the Bones ball bearings 18022 in the wheels. Now it runs perfectly and without…
I recently purchased two Ikea Nävlinge lights for bedside reading and loved their sleek design and ease of installation. However, the light was too intense for my taste, and it disturbed my wife while I was reading. The lamp emits 220…
Now includes Belkin 3-in-1 charging stand option Now updated for Magsafe This is my Modular Bedside shelf. Designed to slot over an existing Ikea Lack floating shelf bracket. Pictured sanded and painted gloss grey. I've been using it as a…
This project requires a total of 12 prints. 4 top brackets, 4 bottom brackets, and 4 feets. You will need the 3d printed parts, One 1x6x6' Board, One 1.25in x 6' dowel & a pack of #6 1/2" screws. The 6 foot board is to be cut into a total…
I designed this holder for my wife; it’s used to attach a cell phone to the side of the bed. I can even place the cell phone on the bed with the charging cable still attached. Another use is as a holder for paper tissues.
This model allows you to upcycle your empty Prusament spool into a bedside table. The hole in the middle is useful for the cables of your phone charger. It snap fits so i recommend using PETG to allow a bit of flexibility when you snap it…
Ich habe die schichtdicke oben ein wenig reduziert (etwas zu viel im Foto) gerduckt in PETG sie ist im gcode besser gcode für Prusa 3 und 4
Great for : tissues, phone, remote, nasal spray, small book, keys, small trees and melons. Print parameters Printer : Prusa Mini+, FW 6.1 Material : PLA Nozzle : 0.4mm Layer-height/profile : 0.2 mm speed Supports : none Input shaper :…
Hi, I designed this bottle holder to keep my large 1.5l Camelbak bottles in reach, without the danger of throwing them of my bedside table at night. It fits 1.5l bottles up to 100mm and large cups that are at least 100mm. Bottles that are…
Wall art, coaster: Early summer reeds (two colours) When the sun passes through the reeds on a summer evening. Who ever lived near some lake, knows that. Orange or yellow and black or nearly black other colour.
This is the perfect bedside table organizer. It has a lifted area to hold cups/drinks without them getting knocked over. One of the unique things about this organizer is the areas to put small notebooks/books as well as it is made to be…
Part can be printed in two pieces without affecting functionality. Attached are both the two piece and one piece model files. One piece print will require supports, two piece will print without, just add brim and print. On the two piece…
After a fall on my MTB I destroyed an internal part of my Sram X9 rear shifter. For fun, I decided to design a 3D printable version of the part and see if I could repair de mechanism. After a few iterations I had a working design that, to…
This piece will replace the little brass threaded inserts that commonly pull out of the plastic on the rearmost rear fender attachment points of an Alta MX and MXR, or the second to last pair on EX, EXR, and SM models. There are models of…
Guide attaches to the rear fender (3M double sided tape used in pictures) to guide and support a dune safety flag on an Alta Redshift motorcycle. Curvature made to match the contour of the rear fender in the approximate position shown in…
This model is a LED base for a Heart sculpture. The LED base is designed to work with 3mm flashing LEDs. The flash is built into the LED so nothing more than a 2032 battery is needed. I used a combination of red and yellow to get the…
100x160mm sign, reading "Familiarity breeds contempt, and often Children" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my…
Would you like to make extra income selling these planters (and future new models)? Please feel free to check the models with the included commercial license here:…
Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…
When adding the Nevermore air filtration system and two additional the bed fans I wasn't happy with the cable management solutions that I found 😕. I started with designing these clips for the cable routing but that left me still missing a…
Disclaimer : These models are created with the help of AI tools, but always refined with my own ideas, prompt work, and post-processing for printability. I deeply respect traditional 3D designers and their craft, and my goal is simply to…
An improved version of this model is available at: Hundreds of Metric Hex Screws Version 2 The screws are inspired by DIN 933 / ISO 4017 metric screws with hexagonal head and long threads. The standard screw design has been slightly…
With these models I set out to do something that was both simple to print and assemble , but also instantly recognizable as your favorite furry friend. This simplicity makes them easy for even the youngest children to slide together,…
The files here maximize the usage of the print bed from the AnkerMake M5 (235 mm × 235 mm)) and M5C (220 mm × 220 mm) printers to print the honeycomb storage wall. New to the honeycomb storage wall? Look Honeycomb storage wall by RostaP ,…
These screws are inspired by ISO 8765 metric screws but they have standard pitch threads . They come with hexagonal heads, that are slightly bevelled on one side and contain a washer-like elevation on the other side. The longer screws…
The screws are inspired by DIN 912/ISO 4762 metric screws with cylindrical head and hexagon socket and long threads. My new thread desing has improved thread geometry and does not require diameter tolerance with respect to the standard…
The screws are inspired by DIN 931 metric screws with hexagonal head and partial threads. My inproved thread design should fit without tolerances. Please print with low layer height, e.g. max. 0.15 mm for a 0.4 mm nozzle. Please be…
This modifications of the original prusa MMU2S extruder, were the only way i could make it work properly (for me). It has been really frustrating months, there is a lot of ideas you can find searching in forums, i tried all of them and…
Keep your phone within arm's reach — no nightstand needed. This bedside phone holder hooks securely onto your bed frame and holds your phone upright in a sleek honeycomb pocket. Grab it in the dark, charge it overnight, done. Fully…
OpenEDS - Soda can opener It's the first tool of the OpenEDS collection . OpenEDS is made to create open-source assistive tools to make easier and less painful life for Ehlers-Danlos Syndrome people. Description With EDS, It's hard to…
The screws are inspired by DIN 7991 metric screws with countersunk head and allenkey socket. My new thread desing has improved thread geometry and does not require diameter tolerance with respect to the standard dimensions any longer.…
A large set of metric dome head screws with partial threads inspired by ISO 7380. The standard design has been modified for easy printing. The improved thread design has a maximum tolerance of 2.5 µm. It should well fit without…
50% infill, 6 walls, ABS or other extra durable. Prints in 2.5 hrs on Bambu X1C. Updated without the weird layering issue! Not sure what the heck happened.
This is an old video I made as a quick showcase some time ago and will be replaced with another better one soon: IMPORTANT NOTE Even this LED cube is much much easier to assemble than my previous “ Geodesic(k) RGB LED Spheres ” , it still…
Read the full guide on: https://learn.adafruit.com/breath-of-the-wild-guardian-sword-led-3d-printed/ This is the Guardian Sword from Zelda, Breath of the Wild. It’s fully 3D Printed and has a ton of NeoPixel LEDs. This thing is super…
Material used: One 40MM Mini Audio Portable Speakers, like a this one . 3x M2x20 screw, 3 feet made of 3mm rubber (see photo). ReSpeaker XVF3800 from SeeedStudio: https://www.seeedstudio.com/ReSpeaker-XVF3800-USB-Mic-Array-p-6488.html…
UPDATE 07.05.2023: After several requests i added the versions for the most common tube sizes (10, 12 ,15, 16mm) and for 18mm french cleat bar. :-) A French cleat holder for the (crimper)pliers! Inspired by a model by Mikhail on…
I designed this organizer to sit on a bedside table, to hold a phone, a smart watch charger, an e-reader, and with a small drawer for things like earplugs, chapstick, etc… The caddy itself is 6.75" deep, 5" wide, and 2.625" tall. The…
The SeedSigner PiP-Pill is a compact case with a print-in-place hinge and a very comfortable user experience. This compact enclosure makes use of the smaller “ zerocam ”, making it small enough to fit in any pocket. The trackball,…
Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…
Thank you to everyone who made this possible <3 Here it is, the Rugged Pill SeedSigner case. Single extruder and MMU Versions included. Print the Thumbstick and Buttons from TPU (98A) for the best handling experience. For the MMU version,…
I designed this so my kids could have a cupholder right next to their bed without having to have a table there. I designed the dimensions to clip onto their bed frame. It would be an easy remix or re-scaling to get it to fit your bed…
This model is a folding wing glider, tilt the wings down and backward and it will fly like a dart, once it hits its apex the rubber band will be able to overcome air resistance and will flip the wings into glide configuration. With…
You too can have a little rhino that needs a hug! This file is free for personal printing use. Join our club to get rights to print commercial while being an active member! We have lots of cute little creatures and more are on the way!…
I’ve always been deeply fascinated with the aesthetic of WOPR, the computer from War Games (1983). The steadily changing lights that allegedly represented the state of the machine are something I’ve wanted to replicate in my server rack…
The screws are inspired by DIN 913 metric grub screws with hexagonal socket. The screws come with my improved thread geometry and should well fit without considering printing tolerances. In case they do not please report! Please print…
The V30 is designed to need a lot less breath to be super loud. The tone is more precise, cleaner, but still easy to print. Be carefull, this whistle is really loud at low air flow! Links to the Thingiverse files: V29:…
Hi, this is a bed-side phone shelf nothing else, enjoy
Update: added a holder. 1/6/2025 The Peacocks! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. Yellow…
Удобная посуда для употребления Фисташек, семечек, конфет. Внешняя часть может использоваться как чаша для фруктов. Я считаю полезная вещь. Оставляйте комментарии и делитесь своей печатью. интересно посмотреть как она выглядит в других…
This is not my design. it's from Tini1 I changed the stearing weel and cut of the weels so you can print this without support. I put the wheels in a separate file ..glue them back on 2:1 printed layer size 0.1 Print instructions Category:…
I tried a few other prints like this but wasn't happy with them so I ended up designing my own version. There are 2 lengths. A short and a long depending on the thickness of the material. There's only about 3mm difference in length for…
A set of faceplates, a digital cross, a joystick, and a pad for the popular SeedSigner ( https://seedsigner.com/ ) Open Pill case. Print the faceplates with the face down on the print bed. The pins match the bores of the WaveShare 1.3"…
Quick mod to store your extra heatbed plates and the lid. Not sure if it with work on a K1 max.
How to print; 0.2 layer height Gyroid infill at 15% 2 walls Pegs facing up About: I liked the original's simplicity; But I wanted the freedom of anyone being able to make it as extended as their personal needs required . Everyone's…
Removable Shopping Cart Coin: A Convenient Tool for Your Shopping Needs Product Description: The removable shopping cart coin is an essential tool for your everyday shopping trips. This cleverly designed keychain not only holds your keys…
This is a small box for storing and organizing garden seed packets. The design is inspired from a regular filling cabinet. Tabs can be used to separate seeds at your discretion. If you use tabs, print the extra insert ("tab holder") so…
WORK IN PROGRESS This is a fan housing that holds one or two 120mm x 25mm fans. Five choices of Air Directors Two sizes of base for single or double fans Adjustable direction on the two smaller tops Three sizes of ring (Dyson) style tops…
Also included STL's in case others didn't want to deal with the .3mf file.
The name says it all. WARNING: The top and bottom part are NOT the same!! The model was designed to make all parts printable without supports, so it is not 100% accurate with how it looks in-game. I printed it @ 0.2 layer height. The top…
A keycap based on the minecraft redstone block for cherry mx switches. Print the clear part in clear and the gray part in gray and glue together. Works great if you have a red keyboard like me or turn your rbg for that key to red.
A 1:1 scale model of a vehicle brake caliper, two piece rotor, bearing hub and spindle. Uses real tapered roller wheel bearings so the rotor spins freely! Mounted on stand legs to make a very nice desk model or even an educational tool to…
Add storage while reusing empty filament boxes with a scalable, wall-mounted solution. For peace of mind, I mounted the top holders with screws and then used command strips every other which has held up well so far. Each bracket includes…
Store four Rosewill RSV-series hard disk sleds in Alexandre Chappel's second-favorite grid-based modular desktop storage system! Since Rosewill only sells sleds pre-installed in cages, you either have no loose caddies, multiples of four…
Ajout de "pieds" au modèle existant
YALT - Just an easy way to check your leveling capabilities. Got everything tuned in? Perfectly assembled machine? PID and input shaping done? Beautiful mesh created? Slicer settings done? Superior bed adhesion? Then throw this leveling…
Remix de 02 formes que j'aimais bien ! Le résultat est vraiment cool Un joli chaudron Moon avec des anses mobiles + des pieds de dragons ( https://www.thingiverse.com/thing:2593806 ) (…
This is a 3D printable LED strip holder for a led strip that is controllable with an app. In my example, I'm using an SK68612 RGB WW (warm white) LED strip with a LED controller from AliExpress. You can customize the height depending on…
✨ Bring Minecraft Redstone energy into the real world! This mini lantern is designed specifically for the Bambu LED tealight. The model is made of 3 parts : Base – holds the tealight (press-fit) Shade – inner diffuser (gives that warm…
this hat and broom combo can be scaled for any reason or decoration i used mine on to replace the ones that broke.
Bedside lamp, a matching ceiling lamp is in my profile. I created a lampshade based on the Zuzanna Lamp by LeFabShop, as i liked the idea but wanted something with a little bit more hight for a ceiling lamp. Translucent if printed with…
When my daughter came to me with the strap on her Crocs flopping around, I knew my 3D printer could save her favorite footwear. None of the parts need to be printed with supports, rafts, or brims. All files are already properly oriented,…
Ford model T Speedster 1922 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
A collection of finger splints from approximate sizes 3 to 13.5 in increments of .5.
This is the SpeedSloth Mag pouch for Half Dart Mags. Attaches to Molle and Micro-Pals with Zip Ties. Update 10/30 - Added 3C - Rear Plate - Double Molle - Ziptie for Double Molle straps like on the SCRD Belt.
These screws are inspired by DIN 921 metric flat head allen screws. As I could not find standard dimensions for some of the rarely used screw variants, I decided to complete them with best guess estimations. The longer screws have partial…
A bookstand to go on your bedside table that holds the next five books you are planning to read. What shall I read next? Easy to print with no supports @3DPrintBunny
These screws are inspired by ISO 8765 metric screws and they have metric fine pitch threads . They come with hexagonal heads, that are slightly bevelled on one side and contain a washer-like elevation on the other side. The longer screws…
I needed a simple clock in one room, so I designed one. 24h display to be equipped with WS2812B LED-Strips with 60LEDs/m. Each digit will need 15 LEDs, two on each segment with one LED hidden between to segments. I did a lazy wiring job,…
An AI generated US army rifleman. Please resize to your needs. Supports are REQUIRED PLA tested and its awesome.
REDSTONE LAMP from Minecraft Print instructions: 5x diffuser.stl - 0,2mm layer - (white) 8x side_support.stl - 0,2mm layer - (no matter) 3x side.stl - 0,2mm layer - (black or brown) 1x top.stl - 0,2mm layer - (black or brown) 1x…
A U-channel for use with https://www.prusaprinters.org/prints/3267-led-light-bar-prusa-i3-mk2mk3. Print both sides, use some super glue to hold it together. Saves you $40-50 on buying one. Overall length is 31cm to fit the other model.…