Search results: einsy

Sort order

217 models

P
PrintablesPrusa Research

Raspberry Pi Zero frame for Einsy Rambo

For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…

Downloads
14,276
Likes
609
Rating
4.89
P
PrintablesBoogie

Big Einsy case

I created a bigger and reversed einsy case for better cable management and airflow Fits on Prusa MK3 Prusa MK3s Prusa MK3s+ To assemble everything you need: 6x M3 Square nuts (4x Cover and 2x Cablecover 1 and 2 ) 4x M3 nuts (Einsyboard )…

Downloads
4,703
Likes
913
Rating
4.92
P
PrintablesKalleKnall

Prusa MK3/S Einsy Raspberry PI 4B/3B Enclosure with support Brace

I've designed my own very strong PSU-Replacement-Brace (see my Prints) and desided to have the same one on the other side. Here's my new "from the scratch" Design for an EINSY Enclosure with Raspberry PI 4B (2B/3B) and Voltageregulator…

Downloads
3,398
Likes
714
Rating
4.8
P
PrintablesShay

Raspberry Pi Zero 2 W frame for Einsy Rambo

A remix of Libang's Raspberry Pi Zero 2 W frame. https://www.prusaprinters.org/prints/85119-raspberry-pi-zero-2-w-frame-for-einsy-rambo Which is in turn a remix of the original Prusa Raspberry Pi Zero W frame.…

Downloads
1,422
Likes
138
Rating
4.94
P
PrintablesBF3Design

Big Einsy Case Cover Honey Comb remix with Prusa's logos

It's a remix of the Big Einsy Case cover with hexagonal holes and Prusa logos. Big Einsy Case HoneyComb remix also available : https://www.prusaprinters.org/fr/prints/67408-big-einsy-case-honey-comb-remix Big Einsy Case HoneyComb remix…

Downloads
1,030
Likes
168
Rating
4.98
P
Printablesteookie

Einsy Rambo & Raspberry Pi Case

This is a case for an Einsy Rambo Board with room for a Raspberry Pi 3b/b+/4 and buck converter that fits the Bear Upgrade v-slot frame. STOCK FRAME VERSION:…

Downloads
856
Likes
77
Rating
5
P
PrintablesJerlo

Jerlo Einsy Box Bear (Rpi3B+ / Rpi4)

I designed this box to integrate the Einsy rambo and be able to deport the Raspberry 3B+or 4B and improve the cooling of the whole The box has many advantages: Compatible with my bear feet…

Downloads
767
Likes
91
Rating
5
P
PrintablesSpeakingOfBrad

Raspberry Pi Zero/Zero2 frame for Einsy Rambo

This is a remix of the Raspberry Pi Zero frame for Einsy Rambo by Prusa Research . The original only fits the Raspberry Pi Zero, but this frame fits Raspberry Pi Zero W as well as Raspberry Pi Zero 2 W. (The Zero 2 has components in…

Downloads
676
Likes
79
Rating
5
P
PrintablesBF3Design

Big Einsy Case Honey Comb remix

Here is a new remix of the fabulous Big Einsy Case designed by Boogie. Having already redesigned the cover with a honeycomb pattern, I figured that a remix of the case with the same pattern could make a cool bundle. I also drilled the…

Downloads
673
Likes
102
Rating
5
P
PrintablesLV3D

Raspberry Pi Zero 2 W frame for Einsy Rambo V2

Remix of original frame for new Zero 2 W. New Zero 2 W have slightly different placed components. Updated model to V2. No need to use remix.

Downloads
663
Likes
51
Rating
5
P
Printablesteookie

Einsy Rambo & Raspberry Pi Case FOR STOCK FRAME

Summary This is a case for an Einsy Rambo Board with room for a Raspberry Pi 3b/b+/4 and buck converter that fits the stock MK3(S) frame. Supports connecting Pi via USB or GPIO. Supports wiring for MMU2. BEAR frame version:…

Downloads
632
Likes
82
Rating
4.62
P
PrintablesMartin_au

Embiggened, braced, reversed, Prusa Mk3 Einsy enclosure.

This has now been tested. :D This is a beefed up Einsy case for the Prusa Mk3. It includes: • Frame brace. • Reversed Einsy for easy access • Space for cables so they don't squish all over the board. • Improved cable access ports • A port…

Downloads
618
Likes
89
Rating
4.72
P
PrintablesGraloth

Raspberry Pi Zero 2 W frame for Einsy Rambo

This is a complete remodel to ensure it adequately supports the Raspberry Pi Zero 2 W, as the original model interferes with some resistors/diodes on the pi. This remodel also add a bit more clearance for the headers as I found that some…

Downloads
579
Likes
49
Rating
5
P
PrintablesBladeRunner 3D

Prusa Bear MK3/S Einsy Case - Includes Pi Zero Option

This is a Einsy case for the Prusa Bear MK3/S. It's a remix of Juan Puchol's great work. https://www.thingiverse.com/thing:3901001 with some inspiration from a remix shown on the Bear FB group. (I'd give credit for that but I can't find…

Downloads
572
Likes
61
Rating
4.75
P
PrintablesBF3Design

Big Einsy Case Honey Comb remix MMU version

It's just a special version for MMU from my Big Einsy Case Honey Comb : https://www.prusaprinters.org/prints/67408-big-einsy-case-honey-comb-remix Here is a link to the coordinated remix cover :…

Downloads
420
Likes
64
Rating
4.88
P
PrintablesRod

Big Einsy Case for Bear Upgrade

Notable changes Geometry added to mate with the Bear Upgrade V-Slot Extrusions Use either drop-in or standard T-Nuts Use either M5-10 socket head or M5-8 flat head screws Temporary M3-12 screw added to aid in sliding T-Nut alignment. Case…

Downloads
382
Likes
42
Rating
4.94
P
PrintablesBookaroo

Prusa i3 Octoprint Raspberry Pi3 and Pi4 embeded Einsy case

Update: Febuary 10th 2022, added a setting to print the original case and stl without the Raspberry Pi cut-out. Because of power issues when using power from the MK3 board, I have changed to an external case hooked to the frame just below…

Downloads
299
Likes
41
Rating
5
P
PrintablesBF3Design

Big Einsy Case Cover Honey Comb remix without Prusa's logo

It's a remix of the Big Einsy Case cover with honey comb pattern on the whole surface. Big Einsy Case HoneyComb remix also available : https://www.prusaprinters.org/fr/prints/67408-big-einsy-case-honey-comb-remix Big Einsy Case HoneyComb…

Downloads
243
Likes
23
Rating
5
P
PrintablesKevin

Prusa i3 MK3S PSU/Einsy Frame Brace

Frame braces to stiffen Z axis frame. Intended for printers with the PSU and Einsy board removed for operation in a heated enclosure. Einsy brace uses 4 M3 screws while the PSU brace uses 2 M3 and 2 M4 screws. Prints without supports.…

Downloads
220
Likes
38
Rating
5
P
PrintablesBrien

Mammoth Prusa MK3 Einsy Case Replacement

Problems I am attempting to solve: Original Case was extremely cramped. Original Case was a pain to mount to the frame Original Case didn't have very good wire management Original Case was a pain to get into Design Goals Has to print…

Downloads
212
Likes
78
Rating
4.88
P
Printablesnimus

Prusa MK3S+/Bear MK3 Einsy base&door with M3 heat set inserts

MK3S+-Einsy-base-M3-heat-set-inserts_rev2 - for MK3S family without cutout for RPi MK3S+-Einsy-base-RPi-M3-heat-set-inserts_rev2 - for MK3S family with cutout for RPi BEAR-Einsy-base-M3-heat-set-inserts_rev2 - for BEAR Upgrade without…

Downloads
210
Likes
18
Rating
5
P
Printablestjb1

Big Einsy - Hole Fix & MMU

Fixed the holes so screws from spare parts can be used and rotated the top nut insert so it doesn't fall out when screw is removed. Also added a second hole for MMU cabling - not tested.

Downloads
210
Likes
27
Rating
4.86
P
PrintablesRapidMonster

Raspberry Pi Zero 2 W fan cover for Einsy Rambo

I noticed, that my Raspberry Pi Zero 2 W got pretty hot running the OctoPrint web interface so I remixed the original cover from Prusa Research to hold a 30mm fan. The fan can be plugged into one of the spare 5V ports of the Einsy Rambo…

Downloads
204
Likes
45
Rating
5
P
PrintablesPetr Novacek

Prusa MK3, improved raspberry PI zero W frame and EINSY case.

Enhanced RPI zero W frame. For projects with GPIO. Print instructions Category: 3D Printer Accessories

Downloads
200
Likes
7
Rating
0
P
PrintablesResin_Chopper

Raspberry Cover for Einsy box

Remix of Raspberry pi zero einsy cover of original prusa one. Just aesthetic mod

Downloads
186
Likes
31
Rating
5
P
PrintablesRoberto

MEGA BOX MK3/S+ EINSY-RASPBERRY PI4 E PI3 CON USCITA HDMI - OCTOPRINT

Dopo aver analizzato le varie soluzioni trovate, ho deciso di progettare un box, per la scheda Einsy e il Raspberry Pi4, di mia iniziativa. Questo non è un remix ma un mio progetto. Ho cercato di includere ciò che serve alla stampante,…

Downloads
178
Likes
48
Rating
5
P
PrintablesIkarusIBK

Einsy door with fan

I wanted a simple solution, so I took the original door from Prusa and fitted a Noctua fan (40mm/5V -→ https://amzn.to/3jNQT64 ). Used two M3 (10-12mm) screws to secure it and powered it from the P3 section of the board (pins 1+ and 7-).…

Downloads
177
Likes
36
Rating
4.67
P
Printablesjharris

Big Einsy Case MMU2s Clip in Place MK2.5s/MK3s+

A remix of the Big Einsy Case with the MMU2S cable. It has a much larger slot for the insertion of the mmu2s cables. It requires support enforces for the slot. This makes it possible to get the cables for the mk2.5s in place. I made it so…

Downloads
176
Likes
30
Rating
5
P
PrintablesJessie

Einsy Rambo Box for Mounting on the outside of an Enclosure.

This is a redesign of the Einsy board box to mount the board outside of the enclosure. The four screws for the board should be long enough to go through the board and to the inside of the enclosure to attach the box to the side wall.…

Downloads
176
Likes
22
Rating
5
P
PrintablesLeonard_1995

Prusa MK3/S Einsy Raspberry PI 4B/3B- Remix with honeycomb and write

I modified the original files to add a honeycomb texture and a write. I don't have the MMU2, so i printed the things separately and then assembled. I upload the .gcode with 0.3 mm layer height, but for the screw, the write and the top…

Downloads
169
Likes
56
Rating
0
P
PrintablesKrisas Man

Flipped Raspberry Pi Zero 2 enclosure for Einsy RAMBo Board

I installed a Raspberry Pi Zero 2 W shortly after they came out but found it ran a bit hot, around 66°C at idle because there is limited air flow to the CPU since it faces the Einsy RAMBo board. I worked up a design with a fan for…

Downloads
159
Likes
38
Rating
5
P
PrintablesKolbi

Einsy+rPi4

Einsy Board + RaspberryPi 4 + DC-DC Stepdown, original case modification/remix, use original access door. Eisny-base.stl modification to allow for mounting rPi4 + dc-dc step-down converter while maintaining the original design look and…

Downloads
159
Likes
20
Rating
0
P
PrintablesMaybeSpooknik

Prusa MK3/S Einsy Raspberry PI 4B/3B Enclosure For Prusa Bear - Remix

This is a remix of my favorite Einsy + Raspberry Pi Case for the Prusa Bear Upgrade This is still WiP, I have not tested it myself, but everything lines up in CAD and the changes are very minor. I will remove this warning once I test it.…

Downloads
159
Likes
33
Rating
0
P
PrintablesPrusaPilot

Big Einsy Case Extruder and X-axis Cable Holder Cover

I love the Big Einsy Case design by Boogie. But, I didn't like the x-axis cable going out of the cover and to the side. I thought there might be an opportunity to have the cable stay flat against the side of the case while also making the…

Downloads
157
Likes
19
Rating
5
P
PrintablesGorobey

Raspberry Pi Zero 2 frame for Einsy Rambo

For Raspberry Pi Zero 2 W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. For printing, assembly, installation and configuration follow the instructions:…

Downloads
157
Likes
13
Rating
5
P
PrintablesUnknownUser

Prusa Bear MK3/S Einsy Case - MMu Remix

This is a Einsy case for the Prusa Bear MK3/S. It's a MM remix of remix of Juan Puchol's case. https://www.thingiverse.com/thing:3901001

Downloads
148
Likes
13
Rating
0
P
PrintablesDevilscave

Prusa MK3 and MK3s Einsy Housing Hexagon R4+

DEUTSCH: Heute habe ich mir das Einsy-Gehäuse des MK3/s vorgenommen um es mit einer Wabenstruktur zu versehen damit es besser zum rest passt. Die Optik ist angelehnt an das PSU-Cover von "mariusvw"…

Downloads
144
Likes
10
Rating
0
P
Printablesgoldbird3

Big Einsy case with inserts

For assembly instructions see the original upload https://www.printables.com/model/31558-big-einsy-case Instead of the nuts and square nuts you will need 10x M3 inserts Hole diameter for insert is 4mm. I modified both the original and a…

Downloads
140
Likes
18
Rating
5
P
PrintablesJanek

Prusa MK3S+ in MK4 frame – Einsy Rambo holder (Steel Box Mount)

This is a custom-designed holder for the Einsy Rambo board , created for installing MK3S+ electronics into the MK4 steel electronics box . 💡 Use case: MK3S+ rebuilt into MK4 frame reuse of original Einsy Rambo board hybrid / custom…

Downloads
140
Likes
13
Rating
0
P
PrintablesMecky1963

[MK3S+] Big Einsy enclosure with RPi3/4

I made this remix to use Ruthex heat inserts, M3 for Rambo and Cover, M2,5 for RPi. The cover is redesigned to use Socket screws instead of Flat heads. You should use all the additional parts from the original. I didn't printed the parts…

Downloads
140
Likes
15
Rating
0
P

Prusa MK3S+ Frame Brace - Replaces Einsy Door

This is a reinforced and braced Einsy door mod to brace the Z axis to the Y axis. Just use your stock Einsy base with this. This prevents the Z axis from wiggling and should improve your prints. I tried to keep this as simple as possible…

Downloads
138
Likes
33
Rating
4.67
P
PrintablesBaGooN

Big Einsy Case Cable Cover Remix

Even cables that are supposed to be fastened securely will loosen and become slack before you know it. If the cable is slack, it may rub against the print bed or the printed object, causing trouble. This cable cover keeps the cables high…

Downloads
132
Likes
31
Rating
5
P
Printablesherr_brain

Better Einsy Case

I designed my own Einsy case based loosely on the the “Embiggened” design by Martin_au, but made several changes/improvements: Reduced wall thickness results in improved print time Design optimized for a 0.6mm nozzle and 0.4mm layer…

Downloads
129
Likes
21
Rating
2
P
PrintablesExtrutim

Alternative Door For YZ Einsy Case

An alternative design for the YZ Einsy Case from Carter which I designed for the Prusa wide body kit . This upload contains only the modified doors. All other parts must be downloaded in the linked original. I attached the inner grille to…

Downloads
127
Likes
36
Rating
0
P
PrintablesZARIBO

Raspberry Pi3 Pi4 Einsy Rambo Mount

Zaribo Raspberry Pi Einsy Rambo Mount. Please see the blog post below for the assembly tutorial. Assembly Tutorial

Downloads
126
Likes
19
Rating
5
P
Printablestudormts

Einsy Rambo & Raspberry Pi4 + onboard Fan case for stock Frame

This print is based on https://www.prusaprinters.org/prints/30296-einsy-rambo-raspberry-pi-case-for-stock-frame I modified the case so it can fit a Raspberry Pi4 with onboard fan. My fan modell is ZP-0042 New design Design from…

Downloads
126
Likes
37
Rating
5
P
Printablesfuchsr

Honeycomb Big Einsy Case Lid — no logo

I thought BF3Design's version of the Big Einsy Case lid with a honeycomb pattern was much more attractive than Boogie's original but I didn't care for the huge Prusa logo on top. So here's a simple remix that removes the logo in lieu of a…

Downloads
124
Likes
25
Rating
5
P
PrintablesMustang52

Big Einsy Case with Raspberry pi zero 2 cutout

This is just a remix of the big einsy case but with the cutout for a raspberry pi zero 2. You can use the stock cover.

Downloads
122
Likes
22
Rating
5
P
PrintablesAlex SAF

Big Einsy case MK3S

Printed in PETG Orange.

Downloads
118
Likes
13
Rating
0
P
PrintablesPete

Einsy Rigid Case Upgrade

I tried several other designs and figured I might as well model one myself that kept the original back and mounting structure so other existing prints like the Raspberry Pi cover could still be used. This design utilizes most of the…

Downloads
118
Likes
19
Rating
5
P
PrintablesJason

Big Einsy - MMU Connector Slot

I like the remix by @tjb1 to add a hole for the MMU cable, but I have added a slot for the signal cable connector. I did not like the idea of disassembling the connector to fit the cable through the hole. Print and assemble as per @Boogie…

Downloads
116
Likes
10
Rating
5
P
Printableswfvn

Dummy for Einsy Rambo board MK3S+) and Raspberry Pi 3B board

I'm creating another case for my electonics…. again…. Again I'm measuring the PCB boards of my Einsy Rambo (for MK3s+) and Raspberry Pi 3B. Why not create a simple 3D dummy model to just ‘fit’ the model into my new case I'm creating.…

Downloads
114
Likes
6
Rating
0
P
PrintablesLouisVarley

Phat Einsy case (Even Bigger Big Einsy Case)

Is the Big Einsy Case still not Big enough? struggling to fit some additional goodies in there! Introducing the Phat Einsy Case! This is as big as it can possibly go! You phsyically cannot print a bigger case using the prusa I3. There is…

Downloads
110
Likes
17
Rating
0
P
PrintablesTill

Einsy Rambo Mk3s 40x40 fan modification

I added a 40x40 fan to the Einsy housing. It reduces the internal temperature dramatically. Its perfect for using the Pi Zero 2 W. I printed it with 15% infill. Perfect for 40x40 nocuta 5v. You can take pin 1 and 7 from P3 for power.

Downloads
106
Likes
18
Rating
4.5
P
PrintablesVerbs

Big Einsy Cable Cover w/ties

Love the big case, but it didn't hold the wires exiting to the extruder very well and started drooping on me. Made this cover so I could wire-tie the bundle and make sure it held.

Downloads
103
Likes
17
Rating
5
P
PrintablesRene

Big Einsy w. MMU and RPI zero

Modified the case to have option for RPI zero and MMU

Downloads
99
Likes
13
Rating
5
P
Printablesawestom

Prusa Bear Big Einsy Enclosure/Case

I took the cable holders from Boogie's case, added them to Spooknik's remix, creating the Prusa Bear Big Einsy Enclosure/Case. I'm going to straighten the hexagons on the lid, and add a few different logo options. Load the cover, then…

Downloads
98
Likes
19
Rating
0
P
PrintablesBookaroo

Prusa i3 Octoprint Raspberry Pi3 and Pi4 embeded Einsy case

Update: Febuary 10th 2022, added a setting and stl to print the original case without the Raspberry Pi cut-out. Because of power issues when using power from the MK3 board, I have changed to an external case hooked to the frame just below…

Downloads
96
Likes
9
Rating
0
P
PrintablesMattlukc

Big Einsy case + RPI Zero Cutout

Edited the big einsy case to have the RPI zero cutout like the original. Uses the same RPI cover as the original as well

Downloads
95
Likes
10
Rating
5
P
PrintablesTillin9

Einsy enclosure for BPI Banana Pi M2 Zero Plus

My Raspberry Pi Zero W caused no end of problems with my MK3. With a little redesign, I switched to a BPI Banana Pi M2 Zero Plus and now everything works a lot better. If you wanted a WiFi-connected MK3 or MK3s (with a camera) but also…

Downloads
94
Likes
11
Rating
0
P
Printablesroland.f1

Small Einsy Case Cover

Its a simple small cover for the Einsy-Case after removing the cover of the RPi interface area. I was in need for such a cover, after I finished the project of Michal Altair Valasek "How to make 3D print time lapses with your smartphone…

Downloads
94
Likes
4
Rating
3
P
Printablestubeless2276

Big Einsy case alternative cover

I really like the case design, but figured it needed a more "Prusa" flair, so I make the holes into hexagons! Also removed a bit of material in the captured nuts holes, since the way it was designed before, it would be a super thin wall…

Downloads
94
Likes
7
Rating
5
P
PrintablesSonicBroom

RMU MK3 Big Einsy Brackets

I remixed the original RMU MK3 brackets from filamentbuffer.co.uk to fit my setup with the Big Einsy Case and squash ball feet and the Bear X upgrade. it is a snug fit but fits fine. Update: 13/09/2023 Added new file MK3 Upper Bracket Big…

Downloads
91
Likes
9
Rating
0
P
Printablesrjorgenson

Raspberry Pi Zero 2 W frame for Einsy Rambo

This is a super quick tinkercad remix of the pi zero frame from Prusa Research that relocates the support post to an empty spot on the PCB and raises the frame above the mini hdmi port which appears to be slightly taller than on the…

Downloads
91
Likes
11
Rating
5
P
Printablesscubam@xx

Big Einsy Case Cover Honey Comb remix with MMU-Multicolor Prusa's logos

printed with Prusament, Jet Black and Prusa Orange 0.2mm layer height Thanx to @ Boogie for that super cool basic model and @ BF3Design for that remix happy printing and please post a make, i would really appreciate it :)

Downloads
90
Likes
17
Rating
5
P
Printablesherr_brain

Improved Einsy enclosure with removable door

There are a wide variety of remixes and custom Einsy cases (including my own ) available… so why do we need another? I've looked in detail at a few different designs, and learned from my mistakes: Having an enclosure that opens outward…

Downloads
88
Likes
12
Rating
0
P
PrintablesZen3Dlab

Mirrored Einsy Case for Prusa Mk3 (with heatsink window)

My model was made four years ago, which I brought over from thingiverse. I don't know why Einsy's box opens inside. This makes it very difficult to access the wires. I flipped the original box and tweaked it slightly to cover more at the…

Downloads
88
Likes
20
Rating
0
P
Printablesltlowe

Big Einsy MMU+

My MK3S developed the “XFLASH is not responding” problem, so I had to replace the Einsy. Since I was going to be tearing it all apart, I decided to create my own version of Boogie's Big Einsy Case with an MMU cable entry port along the…

Downloads
86
Likes
15
Rating
5
P
PrintablesMarv

Big Einsy Case - Plug & Play

This remix of this nice Big Einsy Case is optimized with Plug & Play for Maintenance. My idea was to get the printer quick out of my enclosure, which was a little hassle until these successful upgrade, because the Power Supplier and LCD…

Downloads
85
Likes
47
Rating
5
P
PrintablesHedo3D

Prusa Einsy Case for enclosure with active cooling

I used KalleKnall's design to modify it to include active cooling. I removed the area of the Raspberry because I have my Raspberry outside the print enclosure. I use 2 fans, the upper one blows the air onto the Einsy board and the lower…

Downloads
85
Likes
16
Rating
5
P
PrintablesTheBoatbuilder

Raspberry Pi 2W Einsy cover door for PrusaLink

I took the original raspberry pi 2W door for the Einsy case and added radii to the slots.

Downloads
85
Likes
3
Rating
5
P
PrintablesLeftcetio

Big Einsy Case for Raspberry Pi Zero W 2

I really like Boogie's Big Einsy case with BF3Design's remix, and this is just a minor remix, but with the RPi Zero W 2 it makes a big difference! By routing the LCD screen ribbon cable along the right side of the box you can mount the…

Downloads
83
Likes
15
Rating
4.83
P
PrintablesChip

Prusa Mk3 Einsy fan

I modified the case to add a 4010 cooling fan. This is the workaround to fix the TMC overheat problem. You wont have access to the piZero header with this mod. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter…

Downloads
81
Likes
25
Rating
0
P
PrintablesG.design

Original Prusa Einsy base modification.

Redesigned R3 Einsy base, with longer extruder cable clip. Posibility to use cable ties for better fixation of the extruder cable sleeve. STEP files are included (I had to make it from scratch), so it easily can be reverted to the…

Downloads
81
Likes
8
Rating
0
P
PrintablesRoberto

MMU2 - VARIE MODIFICHE - RINFORZI - AGGANCIO TUBI - CABLAGGIO FILI - SCOLLEGAMENTO DA EINSY

Ho apportato alcune modifiche alla MMU2. 1)- Il piano di base è rinforzato a 4 mm. 2) - Rinforzato anche il coperchio supporto elettronica. 3) - Riporto a misura del fianco sinistro. 4) - Incluso nella base le filettature per i raccordi…

Downloads
81
Likes
11
Rating
5
P
Printablesd0pefish

Raspberry Pi Zero/Zero 2W Mounting Bracket for Big Einsy Case

This bracket lets you mount a Raspberry Pi Zero or Zero 2W above the Einsy board in Boogie's Big Einsy case for easier access and better cooling, as the Pi's CPU (which runs hotter in the 2W) is not sandwiched behind the Einsy as in the…

Downloads
80
Likes
17
Rating
5
P
Printablesxy3Dfarts

EINSY USB B Support Bracket Prusa i3 Mk3S

Hate seeing cables bent =/ Just a simple print to support the USB B cable connected to the printer from the computer. I used one of the spare M3 screws that came with the printer. Using PLA instead of PETG will probably work just fine too.

Downloads
79
Likes
12
Rating
4.83
P
Printablespilniczek

Einsy & Raspberry pi3B Box - Prusa I3MK3S

13.12.2019 UPDATE: Door issues Fixed! But still WIP now... BASIC INFO *Multicolor Einsy box without the need to have MMU . You can design your own box & doors patterns or make them changeable... (You do not need to glue it!) ASSEMBLY TIPS…

Downloads
75
Likes
6
Rating
0
P
Printablesrin_ofumi

Einsy RAMBo Board reversed Case

RAMBo board inverted. It can't attach the Raspberry Pi directly to the enclosure. It also reinforces the frame. It prevents the sleeve of the extruder cable from slipping out. See my blog for more information. (it's Japanese) Print…

Downloads
74
Likes
18
Rating
5
P
PrintablesNo WaterMark

Pi zero 2 Heatsink, flipped (ribbon) for Einsy

This is a remix which was made to include the ribbon cable for the Pi's camera while leaving the raspberry pi zero (2)'s heatsink facing outwards . To accomodate the flipped pi you will need to disassemble the back of the einsy cage and…

Downloads
74
Likes
15
Rating
5
P
Printablesmadeby_aaron

Einsy Case Raspberry Zero 2 W Flipped

First off, great idea by Krisas Man for the flipped design. Full credit to him. Secondly, thanks No WaterMark for the ribbon cable path. I did some adjustments: Re-aligned the mounting holes with the actual Pi Zero 2 W dimensions Changed…

Downloads
72
Likes
15
Rating
5
P
Printablesscubam@xx

Big Einsy Case Honey Comb Multicolor remix MMU version

printed with Prusament, Jet Black and Prusa Orange 0.2mm layer height Thanx to @ Boogie for that super cool basic model and @ BF3Design for that remix happy printing and please post a make, i would really appreciate it :)

Downloads
72
Likes
14
Rating
0
P
PrintablesLuis

Prusa i3 MK3 + Raspberry Pi 4 + Einsy Rambo Box

This is an enclosure box to replace the original box of the Prusa i3 Mk3 S+, where both the original Einsy Rambo board and a Raspberry Pi 4 can be enclosed. There as holes on the side for a small fan that will direct the ventilation over…

Downloads
70
Likes
10
Rating
5
P
PrintablesFreycraft

MK3S+ Einsy Base Cad/STEP/STP

Since I have been looking for the latest CAD of the Einsy case for a long time, I have now converted the latest STL from Prusa with FreeCad. Additionally I added a version in which I removed the element for the Rasper Pi Zero.

Downloads
70
Likes
5
Rating
0
P
Printablesgoldbird3

Big Einsy case with inserts and cable exiting verticaly

For assembly instructions see the original upload https://www.printables.com/model/31558-big-einsy-case Instead of the nuts and square nuts you will need 10x M3 inserts Hole diameter for insert is 4mm. ------------------------------------…

Downloads
69
Likes
15
Rating
5

BigEinsyCase Cover Logo for MMU2s

I've printed the BigEnsy case (BF3Design version). And bought the MMU2s after…. So I needed a solution for this, without printing the whole case. Here it is :-) You'll find version for mmu2s print as the pictures shows it, or for single…

Downloads
66
Likes
19
Rating
0
P
PrintablesPealPrint

Upgraded i3 MK3S+ Einsy Door

Print Settings: Printer: Prusa i3 MK3S+ Filament: PETG Tested with PETG Layer Hight: 0.3 Infill: 20% Grid Exterior Perimeters: 3 Brim: No Heated Bed: Recommended Supports: Yes Everywhere Snug Approximated Filament Usage: 7.93m…

Downloads
66
Likes
5
Rating
0
P
PrintablesJanek

Prusa MK3s+ in MK4 frame – el. box cover (einsy rambo board cooling, fan remix)

This is a remix of the original el. box cover MK4s , adapted for a MK3S+ build installed into an MK4 frame . 💡 Key idea: Reuse the unused blower fan left after MK4 → MK4S upgrade to provide active cooling for the Einsy rambo board inside…

Downloads
65
Likes
8
Rating
5
P
PrintablesRESTLESS DESIGN

Einsy RAMBo Case

I use this Einsy RAMBo case to mount the board outside the heated enclosure. This keeps the temperatures of the chipset as low as possible. Requires some M3 hardware for mounting. Can be printed without support material. Fits on the build…

Downloads
65
Likes
16
Rating
0
P
PrintablesNCrainJr

Ridgid Einsy Case | Reversed, Covered Wires, MMU2S, More Airflow, Hole For LEDs, PiZero2 Frame, Clears X Axis

Will flesh out a better description later. Added hexagon mesh to base to look cooler. Added small hole on top for DC wire to power led lights. Remixed Pi Zero cover to have hexagon mesh. Fixed thin walls in top of base (around where…

Downloads
63
Likes
8
Rating
5
P
Printablesthe_ress

MK3S+ Einsy Base with larger rpi cover

Update: I made a new remix that adds a 40x40mm fan . MK3S+ Einsy Base with larger back opening for better access to rpi and its connectors Installation: Follow the assembly guide in reverse order, undoing only the steps that seem…

Downloads
63
Likes
14
Rating
5
P
PrintablesJacob Falk

Mk3 Einsy case w/fan&cold air intake

Introduction: I print a lot of ASA. I have an actively heated enclosure that gets up to 110F. On longer prints, the Einsy would throw an overheating code. My solution was to draw in cold air from the room to cool the Einsy. Nobody had…

Downloads
62
Likes
16
Rating
5
P
PrintablesGreenParrot

MK3S+ and MMU2S MMU3 Big Einsy Out-facing Case with DB9 socket

The Big Einsy case is an awesome concept. This remix addresses the issue of being able to easily access the frame fixing screws, especially after assembly. A channel against the frame has been opened up to route a +5V power cable up to a…

Downloads
62
Likes
10
Rating
5
P
PrintablesdePrintinator

Einsy Pinsy Control Box for Prusa Bear 2.1

Introduction I wanted a control box that met the following criteria, and couldn't find one, so decided to make my own: Fits both the Einsy RAMBo and a Raspberry Pi. Case fans to prolong the life of the enclosed electronics. All parts fit…

Downloads
61
Likes
9
Rating
0
P
Printablespokeimon

Einsy Door Modified for Pursa i3 MK3 MMU2

About The manual for the MMU2 upgrade requires you to cut the original Mk3 door on Part 3 Step 38 (version 1.0 manual) as seen in the picture below. Instead of cutting the original I decided to modify the original einsy door for the mk3…

Downloads
61
Likes
4
Rating
0
P
Printablesmarian42

Einsy Base for Raspberry Pi Zero (2) W with cutout for a USB OTG cable

This is a modified version of the Einsy Base part where the removable cover for the Pi Zero is already removed. In addition, there is a cutout for a USB OTG cable that can be attached to the Pi Zero, to use with a USB camera or a USB hub.…

Downloads
60
Likes
14
Rating
0
P
PrintablesMykal451

MK3S+ Einsy Case w/OEM Look and Feel Expanded & Reversed

My spin on a larger reversed Einsy case that's truer to the original Prusa MK3 Einsy Base design. I did get a lot of inspiration from Martin Au's Embiggend case, in fact I was using it up until recently. I also have a drop-in t-nut model…

Downloads
58
Likes
15
Rating
4
P
PrintablesWissencat

Hexagon Cover and Cable Clip Big Einsy Case

Hexagon Cover and Clip for the Big Einsy Case Filament used was das Filament Blue Pearl PLA for the Cover For the Clip was used das Filament Antrazith V2 PETG

Downloads
57
Likes
5
Rating
5
P
PrintablesmC_rOMeo

Raspberry Pi Zero 2 W modified frame for Einsy RAMBo (MK3S/+)

It is a frame for the Pi Zero 2 W to install it on the Einsy RAMBo and I added space for the full colored GPIO header w/o unneeded pins and USB&HDMI port cover to protect against shorts.

Downloads
56
Likes
5
Rating
0
P
Printableshefrimu

MK3S housing for Raspberry A+ and EINSY RAMBO board

This housing was designed as alternative solution to the original PRUSA housing for the RAMBO board, which allows only an Rasperry Zero to fit in. The Raspberry Zero is however a little weak for using with OctoPrint with Video Streaming…

Downloads
56
Likes
13
Rating
5