66 models
Tilt Blocks For Your Bambu Lab A1 Tilts the printer 20 degrees I use simplyprint as my software for auto ejection Print with at least 3 walls and 10% infill
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Looking for MORE upgrades for your enclosure? Consider doing this one!…
F-16 Ejection seat most parts are combined for easy printing. The few items that are not will need to be printed later.
P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…
v1.1 - added step files, go nuts Miss loading physical media into some kind of slot to launch a game? And then pressing an eject button to swap to another game? The solution is here! Using the TapTo project , this case can be paired with…
Recently, my brother bought himself a toy gun from Aliexpress. He asked me to set out a new set of bullets for him to show off to his friends. Also, he wanted to see how such schematics are made and how much work it takes to make the…
This is an enhancement of the lee pro 1000 ejection ramp that forms part of the carrier body. The original is pretty bad at letting ejected rounds fall into a bin - inevitably the completed rounds just pile up and require you to scoot…
This model is an ejection seat for the L-39 Albatros jet from customwings.cz in scale 1:3.5. The seat's size had to be adjusted a little bit to fit into the cockpit of the customwings model because the cockpit is a little bit smaller as…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** Motivated by the business card case design by @LoboCNC , and thanks to LoboCNC's…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [Update Oct 6, 2023:] added option for a wider base. ************** Inspired by…
I wanted to have a 3D printer capable of ejecting completed parts and work through a print queue automatically, but without compromising the kinematics or build volume. My solution is to add a conveyor belt over the heated bed of a delta…
High Power Rocketry e.Charge case This is a simple and quick to print recovery charge case in four sizes. This uses standard electronic matches that when seated in the case, prevent black powder leakage. They're designed for single use…
Summary An Air Rifle that shoots 1 inch blow darts powered by CO2. Magazine fed with shell ejection mechanism DISCLAIMER: By downloading these files, you agree that I shall not be liable for any damage, injury or harm resulting directly…
I made this simple toy garage. The lever on the back allows the built-in ramp to be lifted, cars then drive out of the garage. My boy absolutely loves it! The base is seperate, the idea is that it is very easy to come up with your own…
This is a jig for laser engraving AR-15 dust cover/ejection port covers. Remember to flip your images 180 degrees when using this jig and engraving the inside of the cover! SCALE IT DOWN TO 10% OF THE SIZE BEFORE PRINTING...
About I always loved small star cookies (gingerbread). But it's a hard work to cut them in large quantities. So I've created many cutters over last few years (once i even tried a cutting roller - didn't work though). This is my newest…
This model is a modiefied version of my earlier posted ejction-seat for L-39 Albatros jet from customwings.cz. This new version is an unmodified scale 1:3.5 seat and I don't use any screws in this version to make it easier to change the…
The Orca is a modular, shell ejecting, low hardware nerf blaster that uses 4mm elastic and super glue for assembly. Designed to fit the needs of just about any hobbyist or prop blaster enjoyer. Switch from a picatinny underbarrel launcher…
PUMP-2000: Customizable, Shell-Ejecting Toy Blaster (Plinker V3.5 Series) This is a toy that fires a projectile! Never fire at pets or unwilling participants. This can damage drywall, use caution and protective eyewear. Never brandish…
Hello. A local shop got new trolleys recently with a little drawer for the coin. I tried to make a tool similar to the removable trolley coin tokens I had made in the past. The closest I got was this tool that lets me eject the coin after…
Here I present you a customizable, modular CD holder with ejection levers. I am including a pre-assembled STL with slots for 8 CDs, but it is just an example. This is a modular system consisting of four (+1) separate parts. Full CAD files…
EN: Did you also happen to dig out the bowden, which is used to adjust the height of the headlamps, while changing the bulb in the headlamp? With this cover, that won't happen to you. Print without supports. CZ: Taky se vám stalo, že jste…
When extending the JobOx Ejectiong Unit with 20mm profiles, this foot part can be used to support the opposite end of the profiles. In current version the M6 thread must be drilled into the extender profiles. Next version will be usable…
SV06 Bulldozer: What is it? This toolhead attachment is designed for automatic print ejection for a print farm setting/ looping gcode. You can use this bulldozer to knock finished prints off of the build plate and start a new print, like…
Used on many of my rockets. Currently 1g, 2g, 3g, 4g, 6g, 8g, and 12 g tube. Sizes are calibrated assuming 1g of FFFFg = approximately 1 cc. The bottom takes a #4 or M3 screw to hold it to the bulk plate. The hole at 45 degrees is for the…
This is a fully 3D Printed, ejection recovery system for 74mm model rocket fuselages. It consist of two parts, a tube (fuselage) adapter that connects the lower section to the top and also serves as the cap that will hold the shock coord…
3D model description Auto Eject your small parts with ease with this mod. Lightweight, under 13g (Lighter print heads lead to less weight, wich in return means less RINGING effect) Easy to print. Easier to mount! (2 screws) Easiest to…
First remix, and first shared model. plz be kind. I wanted a plate holder, but kinda wanted something trick. So, found a sheet holder that used buttons and mixed it up a bit. I modified this to use less plastic, be mountable vertically,…
Reproduction of the Snag Bars safe-d - Anti Ejection System from Delkim, simply add the bars (metal rod) 4mm in diameter and 106mm long. Reproduction du Snag Bars safe-d - Système Anti Ejection de chez Delkim il suffit d'ajouter les…
hw required hw rn: m3 square nut x1 (5.3x5.3 thinner better) m3 hex nut x5 m3x16 x1 (for the lever hinge bit) m3x30 x3 (bottom lever hinge bit) m3x25 x2 (top catch bit) 016 oringx1 (breech seal) m3x20 x1 (sled ejector) 2-3mm elastic for…
I was looking for a micro-fit removal tool and found that a sim ejection tool works well enough to remove male pins from the plastic housing. I created this handle to make repeated removals more comfortable. It can also be used to assist…
Hangar9 20cc Bronco Ejection seat, with a bit more detail than the plastic lawn chairs included with the kit. there are a number of pieces and you will have to assemble, I used epoxy, the included photo gives and idea of the assembly
Easily remove parts from your Prusa Core One with a scraper that protects your extruder and fans.
Widened for 63 mm wide cards.
Here's the next addon kit to bring some dynamism to SS86 Soundwave! The first thing we tried to improve was to see if we could create a more solid colored tapedeck chest when none of his mini-cassettes are loaded. So this is simply a…
The design uses standard 1.5mm centrifuge tubes to hold the black powder/pyrogen and efficiently have the igniter head at the base of the charge. Snipping the bottom off the tube allows the igniter wire to thread through the base and out…
P1P ejection tool holder for P1P pegboard mod https://www.printables.com/model/360274-bambu-lab-p1p-micro-sd-ejector-too
A ramp that mounts to the front of the Core One print bed and can be used to safely direct ejected parts out of the front of the print volume and into a part collection bin. The ramp does not impinge on the bed's vertical range of motion…
I was having trouble getting my pilot to eject some of my more dense shells, so I made the travel on the ejector a bit longer. This file also has the Yeethammer notches since I didn't want to bother making a non-notched version.
Ejection Tunnel for the "Anfim House Self". It's about 0.5 cm shorter and will reach more into the middle of the portafilter. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: Yes Supports: Yes Resolution: 0.15 mm…
Earplug case with automatic ejection when opened. Print with PETG plastic. Nozzle: 0.4 mm Layer: 0.16 mm Infill: 15% Use 1.75 mm diameter filament as pins during assembly. 1. Connect one end of the connecting rod to the pusher with a pin…
Stand that holds 18mm thick plaque
this is a cover for the ejection side whole of this model.
This charge fits 1 standard MJG Firewire E-match and has a graduated scale on the outside. Use the “cut to height” feature in PrusaSlicer (or just dremel off after printing) to get the correct volume in the tube for your ejection charge.…
This is a remix for the original model that contains a hole for easy ejection of the MagSafe magnet. Despite other remixes, the leg size is the same as in the OG model, so it fits well to monitors with ~20mm thickness of the top border of…
Use of the ejection rod for Tools in headstock or thread-rod for securing my drill-chuck in headstock always sucks, because the inner diameter of the mounted handroller ("handwheel") doesn't match the diameter of the spindle. So i made a…
Replacement for broken ejection catches on Fujitsu magneto optical drives.
The tolerances are very tight (I tried with looser ones first wasn't happy) so you will probably need to use a bit of fine-grit sandpaper. The print files are for 0.6mm nozzle for speedier printing and I use NGen for everything. Two…
phone dock for standby mode s22ultra
a sword that shoot out
Got some suggestions to also create a ejection effect part for Blaster after we did one for Soundwave, so here we go! This is the main piece is tape shaped and goes into Blaster's chest. It has a simple shape which can be either printed…
Use a 38 mm OD, 35 mm ID acrylic tube, 50 mm length.
I test fit the ejection port front and back together, when I pulled them apart the pegs snapped off of the ejection port front. I did not want to spend another 7 hours printing a new part so I made these pegs that will help hold the 2…
The FLP-02 Booster, a double plunger pull-to-prime Nerf pistol, now has the ability to load Silly Shells for some serious double-barrel shotgun fun. The assembly of the blaster is the same as the base model, then install the 016 o-rings…
Hi there! This project is about enabling the Prusa MINI to clear its print bed after printing. Features: I have created custom 3D printable parts for this setup. Printer Stand: It consists of 4 parts and can be assembled using 6 pcs of…
One of the things I run into often with my job is taking UniFi APs off of their mounts. Naturally, if you don't have the long handled tool that comes with new APs, you are stuck either using all your twisting strength, breaking the…
Print with original settings Might need gluing, mine didn't Added logo back Made holes 5mm for 4mm cord Removed breech notches Split into 2 parts to print an orange tip Added more travel for ejector catch because mine wasn't ejecting…
If you own a Next Level Racing Flight Sim-pit, such as the MSFS2024 edition, they are all matte black powder coated steel tubing which when the lights are down is easy to bump into/trip over, so I wanted to make some high-vis wrapper…
This plug is for Leedle Dynamics' Urchin: https://www.printables.com/model/1548889-urchin-rotary-shell-ejecting-foam-blaster/files I liked the option of being able to turn ejection on/off, especially mid HVZ and can front load special…
I made this cherry pitter because the original cherry box was too small, this now lets me use a large bowl to catch the pits in or the second side of my sink. This is designed to fit a Glass cherry pitter, but it should also work on…
Hangar9 20cc Bronco Ejection seat, with a bit more detail than the plastic lawn chairs included with the kit. there are a number of pieces and you will have to assemble, I used epoxy, the included photo gives and idea of the assembly
This is a jig for laser engraving AR-15 dust cover/ejection port covers. Remember to flip your images 180 degrees when using this jig and engraving the inside of the cover! SCALE IT DOWN TO 10% OF THE SIZE BEFORE PRINTING...
Got some suggestions to also create a ejection effect part for Blaster after we did one for Soundwave, so here we go! This is the main piece is tape shaped and goes into Blaster's chest. It has a simple shape which can be either printed…
💿 CD rack storage with push button ejection, to grab your favourite CD's seamlessly. 🖼 Can be hooked onto an IKEA Skadis Pegboard, also key holes for wall mounting. 🖨 Working model printed using PLA with 0.2mm layer height. ❓ Any…
![#0114 [Remix] Business Card Holder <Spring Loaded Card Ejection>](https://media.printables.com/media/prints/665593/images/5286655_cb879090-431c-4fb4-b015-f0fdae30c873_ec75e7ce-cfda-4ebe-b19e-42802fe37971/20231206_224503.jpg)
