534 models
Endcaps for 40mm aluminium profiles. 40x40 40x80 40x120 40x160 80x80 80x120 If you like the print profiles, please consider rating them. Thanks :-)
Print approx. €4.20–€5.14 excl. taxPreliminary estimate for PETGSource material: PET
Left and right endcap for OMNISTOR 5500 motorhome awning. Developed in two parts - you have to glue it together.
Print approx. €1.24–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
Used to protect the end of a SIG-550's cannon. Print instructions Nothing special, just print the flat part of the bed, no support required
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
DIN rail endcap to mount it between two parallel surfaces. I intended to use to mount a DIN rail with some power supplies and relays between to legs of a modified Ikea Lack enclosure. Update 2024-04-25: Added v5 with modified 50mm hole…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
EN: Universal (right-left) countertop trim (LB23) endcap PL: Uniwersalne (prawe-lewe) zakończenie do listwy przyblatowej (LB23) Includes STL v2: Slightly improved the fit, fillets and chamfers. Print instructions 0.1mm 100% infill
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
I bought a clearance power strip at HD, it sat for a while, when I went to install it, realized it had to be hard-wired. I didn't have any easily accessible locations, so I decided to just connect a heavy duty 14-gauge appliance cord ($8)…
Print approx. €0.45–€0.54 excl. taxPreliminary estimate for one variant
End caps for the frame for Drive Nitro Rollator Walker, these caps fit right above the frame where the wheels are at. I printed mine in ABS
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
I designed this for a friends old Gardenchair. The old Endcaps was worn out and need to replaced. He told me that it need 2 soft hammerstrokes to fit. Printed in PETG, 0.3mm, 0.4 Nozzle
Print approx. €1.20–€1.47 excl. taxPreliminary estimate for PETGSource material: PET
Another endcap for 2020 extruded aluminum
Spool ends for the AD5X to add numbers, shaped to the spool spindle ends. Useful to show spool number which are hidden once you mount filament. Original designer did a great job sizing the posts for the print to clip in to existing…
a Nozzle Holder that fits inside a 40x40 Aluminium V Slot extrusion. Common on many Printers, in my case its an Ender 3 Pro Fits 18 Nozzles and Usually you can Fit 2 of these on your printer, or 4 if you don't mind putting them on the…
These are non-marring TPU endcaps that slide over the top and bottom of happymaker 's Adjustable Height Support model. The bottom prevents the base from slipping and the top prevents the part from scratching the lifted item. There is a…
This model is compatible with the lego system.
These are a Remix of the amazing models by TheSameNameTwice. I adjusted some of the belts so that everything would work in a true grid as well as new dovetail geometry, a new end cap for side loading, and holes to allow easy color swaps.…
Aluminum Extrusion 2020 Endcap
Since Jevermeister's holder refused to fit my DIN rail (standard 35x7mm) I decided to remix his models. I decided to go for the following changes: widened the profiled hole for the rail itself shortened them so they will not interfere…
Decorative end cap for two ø2mm paracord ends, to either close a loop or set a colour accent. Also works for a single ø4mm end. no knots no tools no extra parts no support geometry This print is tested with and developed for 0.25mm…
Don't we all know this problem? You're tying your shoes and suddenly the little plastic piece holding the string ends together, flies off into the sunset as you pull the strings tight. Oh no - the strings will start fraying and pull apart…
The endcap is held by a middle pin into the profile. The small standoffs prevent rotation. There are 5 Versions since different extrusion brands also have different hole sizes: with a pin for a 5mm hole with a pin for a 5.5mm hole with a…
This is a VORON style endcap for Misumi Voron 2.4 2020 Extrusion.
Wanted a printable endcap to match the color scheme of my printer. Also wanted it to allow for flush sitting of my ender 3 essential holders. Well this does just that. Needed to remix the original and removed the longer side inserts for…
This is a model for an end cap of a Thule Omnistor 5002 awning. Dies ist ein Modell für eine Endkappe einer Thule Omnistor 5002 Markise. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 0.2…
I used these on my V-Core 3 to mount the DIN Rails without having to drill too many holes into the rails itself. Beside of that, they look pretty neat. My DIN-Rails are “Weidmüller Tragschiene TS 35X7.5 2M/AL/BK 0330800000” I printed…
Removed the magnet holes from the reduced height versions of the gridfinity collection for faster print times. I only edited the endcaps as those were the ones I needed. Also added two more endcaps (2x1 & 2x3). The models are very crude…
End caps for the MPCNC. To make the closed end caps for the frame aligned with the corners, the X and Y sliede-rails must be 4mm (2mm per cap) shorter each. Fits for 25x2mm tubes. Print instructions Print in PETG or ASA
This is a pretty straightforward design. It covers the end of your linear rail to both align it during installation and prevent the carriage block falling off accidentally. There are two files, they are identical with the exception of the…
An endcap for aluminium 2020 profile
This endcap adds 1 inch to the end of a RepRack. Helps in situations were you may want to squeeze in one more spool. Also ascetically adds a nice finishing touch to the RepRack! Sizes included: 18mm (Standard/USA) 20mm (German) Buy me a…
After creating a replica from scratch for HPA there were some holes and unneeded things. So I fired up my CAD. I was in need of covers for the selector cap, charging handle and buffer tube. In addition the original dust cover is triped…
Description This customizer require 8 parameter. -Horizontal dimension (X direction) -Vertical dimension (Y direction) -The thickness of the tube -Length of the part inserted on the tube (minimum recommended is 15mm) -Thickness of the…
Endcap for 30x60 mm aluminum extrusion.
Included are custom FPS end caps for the Adventure Force Nexus Pro; previously sold on Etsy and now shared for free. Details EDIT: Newer batches of Nexus Pros appear to be using a slightly different spring supplier, so we now recommend a…
Here is a 40 x 40 mm end cap for the Ender 3 Pro, being placed in place of the fixings of the original screen. I created it after purchasing a Creality touchscreen. It fits perfectly and does not move once in place. Rafts: No Supports: No…
Just a very easy to print endcap for 4040 V-slot extrusion beams. Anti-snag version: https://www.thingiverse.com/thing:4608507 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter…
A Nozzle Holder that that fits inside a 40x40 Aluminum V Slot extrusion. Common on many Printers ( Ender 3 + Clones ). I remixed this because I wanted a handle to be able to open the drawer easier, of course it HAD to be in the shape of…
Update 1/8/2023 Someone asked for an option for 2 - V-slot 2060s side by side, so I added an option for 4060 & also a 4080 that will work for both 2x 2060 & 2x 2080. This openscad version is now Rev46 with 4 STL files for each option…
Remix of CarGuy47's model to allow this cover to be added to endcap extrusion that has the snap in v-slot covers installed. Part of the interior was cut off to allow clearance for the v-slot covers. Print Settings Printer Brand: Creality…
Extended version of endcaps with covered back with M6, M5, M4 size
Fits onto the misumi 3030 extrusions with the 6.8mm hole and 8mm slots. Held by the middle pin and fixed against rotation by the small standoffs.
Crazy end caps for a 20x20mm aluminum profile for Nut 5 & 6 mm If you want a special version, let me know. I will create it for you Different versions: Normal, closed With hole in the middle for cable feed through Cap half round Cap round…
This file is prepared for a Formlabs printer and have been tested on a Form3B+ with Grey v4 resin printed exactly as oriented in the .form-file. The .zip-file contains a .form-file you can open in PreForm.
Suggested to me by Dave Rome of CyclingTips ( @romeandstuff on Instagram) when he noticed a similar tool in the CeramicSpeed hub bearing tool kit . The tool slips over press-fit end caps found on many hubs, especially those with 12 and…
Cap for the bosch rexroth 4040 profiles Printed on the Bambu X1C with 0.1mm tolerance
A simple endcap to screw on stabilizer end, to add protection and a bit of color. Two version are provided, to fit ¼" and 5/16" screws found on most weights. For improved durability (weak point is the thread) I suggest printing this model…
Endcaps for aluminiumsprofile 40x40, 40x80, 40x120 and 40x160
Simple, but effective way to prevent your lithium bateries from shortening out when stored. To put it on the battery, just squish it by the lines and put it on. The end cap has also hole for measuring the voltage without taking the cap off.
There are a lot of endcaps out there for the 2040 extrusion used to construct the Full Bear upgrade to the MK3. I was having a hard time finding an endcap that slid into the end of the extrusion rather than down the front and sides. This…
Just my design of a Endcap/Feet for 3030 aluminium extrusions. Super Simple and snap in! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.20 Infill: 5% Filament: Eryone PETG Red Transparent…
This is the Support Arm Endcap for the Enraged Rabbit Cottontail Buffer for the ERCF v2 remixed to accept a BTT MMB CAN v2.0. The only change from the original v2 assembly instructions is the addition of two more m3 heat set inserts.
Endcap for the spool holder tube found on Ender 3's and similar printers. I made it to stop the spools from falling while using the spool rollers made by @DropBOB_Designs ( https://www.thingiverse.com/thing:4801992 ). Position the rollers…
Endcap for 2x3 inch rain gutter for use in hydroponics nutrient film technique
Remixed the endcap of Ken226's excellent spool holder to keep spools from falling off mid-print.
Just an other endcap for an 30x30 aluminum profile Print instructions No support No raft Printed with HD-Glass
This is a replacement front cap tool for the Rugged Oculus 22 suppressor. If you lose the original, or just want a better fitting design, this one works. I printed it in PLA which should be fine as long as you don't use it when the…
Uploading because of request in comments for original file This is endcap for pipes / rods that are smaller than those suited for Filament Shelf Bracket model (https://www.printables.com/cs/model/556080-filament-shelf-brackets) This one…
The end cap that holds the thumb screw on my Ender 3 V2 Neo was starting to crack. Fortunately it had enough life left in it to print a replacement. I didn't see any models for this part in my quick search, so here it is. I made it 1mm…
A simple bicycle handlebar endcap with a simple but strong design. To assemble you need a M4 x 25mm socket head cap screw and M4 nut. This should work for handlebars with an inner size between 17-18mm. If you are having trouble tightening…
Modified for 5mm wide slots, otherwise it's the same model. works best in PETG
4040 Aluminum Extrusion Endcaps
I created this replacement endcap in Onshape to replace broken drawer endcaps on my shop Vidmar cabinets.
A end cap for ¾ inch pipe threads as they are used in gardena hose pipe systems. The rubber seal can be found in a separate model as a complete seal and O-Ring set. Print in high quality for a good thread, will still need a bit of force…
Endcap for 2x3 inch rain gutter for use in hydroponics nutrient film technique
I purchased the H&R HAR-15 Blade Pistol Brace, but I found it uncomfortable to handle. To improve stability and comfort, I designed this Endcap Stabilizer, adding more surface area for better support. This Endcap may also be compatible…
This is an endcap for my 4-inch duct splitter model, found here: https://www.printables.com/model/634619-4in-4-inch-duct-splitter If you need to prevent use of one of the outlets, you can just push this piece on, and it will clip itself…
To install, Unscrew the mag base. Then screw the new one in (super simple). The extenders are somewhat untested, let me know if there are any issues.
I printed mine with Prusament PETG Jet Black at 0.2mm layer height.
This is based on the very well designed Ultimate Kitchen Gridfinity - I've taken the f3d file for the solid base version to create only end caps and blank plates. Included are all combinations that with a 5x5 gridfinity space, which is…
Remixed from LH cover / endcap! RH cover / endcaps for Thule Omnistor 5002. Warning 2 different types included. Print with ABS, support yes (tree type), infill 30%, resolution 0.2.
An endcap for DOLD Mechatronik 30x30 B-Typ Nut 8 extrusion. ( https://www.dold-mechatronik.de/navi.php?a=28097⟨=eng ) 3mm thick cover and 3mm deep holders. Print Settings Rafts: No Supports: No Category: 3D Printer Parts
Endcap for 20x20mm V-Slot aluminum extrusion Source files included, includes STL, STEP and Autodesk Fusion files. Compatible with V-Slot profile. Can be used with Type-B profile, but the fit with the profile is very loose. Updated: new…
This is a modified version which fits better when panels of voron are installed. Also thickness was reduced to 1mm. It is just a good way to reduce the sharp edges of the extrusion. Thanks to chking for the original file ;).
Sized for a standard DIN rail.
When I would go out and bash my traxxas slash 4x4 I would always hit a rock or something and knock off a shock endcap or break one. So I designed a better, stronger endcap. I have yet to have one fall off yet. Hope you like the design,…
Quick remix so it can be locked with a M5 bolt.
I needed an endcap to close up a wall through that was no longer needed. And since the home depot was closed already, I simply printed one to close up the pipe with an ID 95 mm/OD 100 mm. With one to two wraps of ductape, this seals the…
A simple cover for windscreen wipers since the hail broke them. It could fit other makes, let me know it and share them!
Although there are tons of endcaps available, it looks for me that they are all different. Needed to create a new one. Printed in PETG (Prusament) on my MK4. Fits perfectly. Will be needed for the enclosure for my MK4. Explore my other…
For use with integrated lead screw stepper LDO 42STH40-1684L300E or equivalent…or if you just want a stronger cap. Added in a Pillow block with the center cutout for the 8mm leadscrew. Edit 3-6-2022: updated z cap to R2 with different…
I remixed this from a file I found on Thingiverse, becuase I needed something to both shift the power switch and input cable, as well as offer a better solution for my power supply as I converted my X5sa to a VZbot. This does the trick…
Endcap for 1" square tube Friction fit
Scale down 97-98% for a tight friction fit. Designed in FreeCAD, printed with Cura LulzBot Edition. Included FreeCAD file for hacking. Print Settings Printer Brand: LulzBot Printer: Mini Rafts: No Supports: Doesn't Matter Resolution: 0.38…
Extrusion ends tend to be sharp, and this model will protect you from getting cut painfully… as I have. It should slide in, if not, change the scale.
A simple end cap to use after you've replaced the DWIN touch screen with a BTT touch screen . All existing end caps I found didn't fit very well. This one is simply printed and screws into place with the existing bolts. Print Settings…
I ordered these track lights from Aliexpress as a kit, sadly they didn't come with endcaps so I designed some up. One is just for closing off the end, the other has a hole for wiring. This is the kit I ordered:…
endcaps with and without chamfer to close the profil
I wanted to repurpose some Misumi 2040 I had laying around from an old AM8 printer and decided I wanted to try to use it for the table of my upright Dewalt portaband saw. I tried multiple configurations ranging from using all double…
I wanted a custom height and solid bases for the Kitchen Gridfinity collection. I found a parametric remix with solid bases. However, it didn't include a parametric model for endcaps. To fix this, I modified the design to a parametric…
Update: 28 Oct 2019 haarp's comment made me realize that although I had remodeled this thing with a T30 torx interface, I had never posted it, so I'm including it now. The flat screwdriver interface wasn't great, and hex was worse, but I…
Since a little metal chip was blocking the original part from fitting, I shortened it. The tolerances are really tight, so beware. Print Settings Printer: Sidewinder X1 Rafts: No Supports: No Resolution: 0.2 mm Infill: 15% Filament:…
Minitec Profil 45x45 Endkappe
Printed on i3mk3s in PETG. Fusion file attached for your editing pleasure.
2020 Endcap with a hole for light bar: https://www.prusaprinters.org/prints/150160-elegoo-neptune-2-light-bar or whatever. I've added a on off rocker switch here:…
Once the spool falls on the bed because of a hitched filament. I created this piece to avoid it falls again. No need extra tools or screws. A infill 20% or more is necessary. No supports needed, or brims or rafts.
Replacement part for a rolling banner. Fits on top of a 14mm metal rod to slot into the top of the banner. Orientated to print in the strongest orientation to prevent breaking along the print lines. Design fits snugly on the 14mm metal…
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Another endcaps for 2040 extrusions. Press fit no screw needed. Printed with ColorFabb XT-CF20 4 perimeter 0,15mm. Frame from Blackfrog.PL Hope you like it
Fits a 1"x8" nominal board to mount the Hadley onto a wood frame without having to cut a semi-circle. Fits an actual board of 0.75"x7.25". Use 3 #10-24 screws to lock in place, need about 1.5" length. Note, this is the first version, will…
Endcap I designed to use on the 2020 profile used in https://www.printables.com/model/479022-stand-for-bambu-lab-filament-spool-switcher-winder
