3,315 models
A little bird. Based on several birb, including robin and tit. This model will be perfect on a shelve. Update : new version V2 with greater definition. I modified the belly and the beak to allow printing without supports. Selling printed…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for one variant
U.S.A. Flag. In celebration of Independence Day, July 4th. No MMU required. Measures approx. 9" x 5" and can be standing up on a desk or mounted on a wall. Print instructions No MMU is required. There are 4 (M600 automatic) color changes,…
Print approx. €9.81–€11.98 excl. taxPreliminary estimate for one variant
All-in-one Repair Kit for a Broken Flush Mechanism. Straight and Angled Levers included. American Standard. No Supports! Higher Infill on Lever Arm Recommended. Assembly Order: Bolt (Cut-out towards the Chain) Nut (Counterclockwise…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
Note that this model has been superseded by this new test square. I find it easier, as well as being faster, covering a wider range of nozzle offsets, and having a finer resolution. This is a test print to help fine tune a printer…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
A replacement for a common type of ball-shaped, spring-loaded stopper, for tightening drawstrings on clothes, bags, etc. You'll need: 1x print included “Body” model 1x print included “Plunger” model 1x spring +-11mm long, +-7.5mm outer…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
Recommended print settings: Material: PETG Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. As seen on Jelle Romers video: And article:…
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
I wanted to use some other PCIe Cards with my ZimaBoard Single Board Computer, but in order to use any card, you need to remove the mounting bracket. As there isn't a standard for where the screw holes will be on a PCIe card for the…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for PETGSource material: PET
I made the Captain America Shield for Lucky 13. I made two versions, a single color version and a multi color version. The multi color version is spilt into sperate parts and then glued together. I included STL files, a 3mf file and gcode…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
This holder allows to store development boards with pins mounted on the bottom in Zack Freedman's Gridfinity system . As such boards come in various sizes (e.g. different ESP8266 or ESP32 boards, Raspberry Pi Pico, Arduino Nano, …), the…
Print approx. €4.76–€5.81 excl. taxPreliminary estimate for one variant
Easy to print captain america shield, no support, keyhole on the back for wall mounting There are a MMU version and several non MMU versions (200 to 400mm diameter) with 0.1mm clearance, just print and assemble.
Print approx. €29.88–€36.52 excl. taxPreliminary estimate for one variant
This is an Update to the Generic Camera Arm for SV06 & SV06+. To Date it is my most popular viewed and download model. So now I'm revising it. It now Includes a Small Lip on the block to prevent arm form twisting. The single screw…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Another edit of a Disney infinity fanart model on SketchFab by JohnLogostini . This is my printable version of it, with a lot of detail in the model itself, instead of maps. Printed at 10cm high on my mk3s+ I added a photo of that print,…
Print approx. €5.15–€6.29 excl. taxPreliminary estimate for one variant
Design in Solidworks. Printing in Prusa i3 MK3S+
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Stan Smith From American Dad.
Print approx. €7.94–€9.71 excl. taxPreliminary estimate for one variant
This gcode will help find the correct z offset for a 3D printer's nozzle. It is a back and forth square (hence “oxplow”) that begins at -0.1 mm below the current nozzle offset and raises it each row until it ends at +0.1 mm above the…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Hello, Two things happened that lead to this design being conceptualized and linked. Bowling balls being precariously perched on seats/tables at the risk of falling while being cleaned after games Helmets being precariously perched on…
Print approx. €5.38–€6.58 excl. taxPreliminary estimate for one variant
The STL file only contains one piece, which you need to print twice. The octahedral chamber inside has 6 vertices, and so causes the ball only to land on one of 6 “sides” when a weight/ball bearing is added inside! If you want, you can…
Print approx. €1.84–€2.24 excl. taxPreliminary estimate for one variant
Rpi camera v2 holder/mount with articulated snapfit joints and mechanical interface to the ethernet RJ45 female connector of your raspberry 3/4. The snapfit joints allow to adjust the camera orientation. All mechanical interface are…
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
Mesoamerican Mask. Large file : Very Detailed and wanted to keep the details as much as possible. As soon as I decimated it, no matter how small, the details just washed out.
Print approx. €15.70–€19.18 excl. taxPreliminary estimate for one variant
I really loved the desk organizer with date from Lothar … but I couldn't fit anything but number two pencils in the front holes and I wanted it to be a little bit less flat and plain… So I spruced it up a little bit with the teacher Apple…
Print approx. €4.33–€5.29 excl. taxPreliminary estimate for one variant
This is print is designed to mount a Netatmo Outdoor module and a generic 433MHz cheap temperature sensor on a pole. It also includes two “radiation shields” which protect the sensors from direct sunlight, but allow air to flow through…
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for PETGSource material: PET
I wanted fillers for the gaps between the front seats and the center console of my 2024 Ford Maverick so I don't lose stuff that could fall in the gaps. I made one for the passenger side and one for the driver's side. They are customized…
Print approx. €4.40–€5.38 excl. taxPreliminary estimate for PETGSource material: PET
I always mixed up the gain knobs on the amplifier with the actual connected cables. To quickly correlate the numbers next to the knobs to the actual cables, I made these labels / lettering plates. The holes match the hole pattern of…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
old cover broke out after 12 yrs in service, so I made a new one in TPU
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
I needed a simple card insert for "Twilight Struggle," so I made my own. It fits 42-44 cards in Standard American size with premium sleeves (90 microns), measuring 27 cm in height so it sit flush with polish cardbox cutout of Twilight…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Created using Fusion 360
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
This is just another type of dice that can be used with board games. I designed it for a 10 mm steel ball. I used myself a ⅜" steel ball. You can easily use other size steel balls by scaling the .stl I printed it in PET for sturdiness,…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for PETGSource material: PET
Key chain of Hamsa with Double spherical bearing Two types: Hamsa with eye and Hamsa with wheel This is remix of my first keychain. Design us one part with space of 0.15mm between the bodies.
Print approx. €0.82–€1.01 excl. taxPreliminary estimate for one variant
I needed a holder for my tablet when I'm not using it, so here it is. This is basically my first model in fusion so it's pretty simplistic. The .3 inch models are for a Wacom CTL-472. The pen holder version obviously holds a 472 pen but I…
Print approx. €1.44–€1.76 excl. taxPreliminary estimate for one variant
I really enjoy designing unique fidget toys that can be printed in place in one shot on my Mini+. These toys serve no purpose other than they are fun to play with, expand my design skills using Shapr3D and really push the boundaries on…
Print approx. €4.57–€5.58 excl. taxPreliminary estimate for one variant
Profiles 0.2mm Speed and Gereric PLA are unmodified, just like they come from the slicer . PrusaSlicer Version ist shown in the pic section, as a screenshot. Greetings to the world !
Print approx. €1.70–€2.07 excl. taxPreliminary estimate for one variant
This slider snaps into the generic ClosetMaid shelving, no need to buy the special SuperSlide shelving. Print instructions Super simple print, no overhangs. I chose PETG for its superior strength and UV resistance. Link to source OnShape…
Print approx. €2.86–€3.49 excl. taxPreliminary estimate for PETGSource material: PET
Here is a simple replacement clasp for textile bracelets (“festival wristbands”). It can be used to replace broken or non-adjustable closure. I designed for wristbands with a thick fabric, and it sits very tight on those. You can use it…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This is my take on the nested spheres toy genre. I've provided a chamfered and filleted version. The sharp version is quite sharp! So I would avoid this version if you intend to pass this to tiny hands to play with.
Print approx. €2.02–€2.47 excl. taxPreliminary estimate for one variant
Another flowerpot with spherical pattern
Print approx. €5.16–€6.30 excl. taxPreliminary estimate for PETGSource material: PET
I found a way to generate topographic maps from saetlite data, then used prusaslicer 2.7 to emboss a track map on it that matches the curves of the hills in the area. the result is a 3d printable topographic track map The finish Line is…
Print approx. €6.15–€7.51 excl. taxPreliminary estimate for one variant
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Print approx. €4.61–€5.64 excl. taxPreliminary estimate for one variant
This is a Model allows for the Webcam to be attached by use of a 1/4" x 3/4" Stainless Steel Hex Bolt. Rather than disassembling the Webcams to attach it to the mount. It attaches using a friction clip attaching to the Z roller Motor…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
I made a camera with detachable lens, battery and memory card for theater/shows If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
My toilet lever broke and I didn't want to buy a new one. This model is certainly not overengineered and the tolerances are pretty tight in most places but if you'd rather print one than order one for whatever reason (or just need a…
Print approx. €2.15–€2.63 excl. taxPreliminary estimate for one variant
This model is a 2 frequency breakdown of an icosahedra. The procedure I followed was from “GEODESIC MATH AND HOW TO USE IT” by Hugh Kenner, 1970 edition. Method is chapter 10.
Print approx. €8.51–€10.40 excl. taxPreliminary estimate for one variant
This is a remix from: https://www.thingiverse.com/thing:2808346 where I personalized the 30 foot radius circle for the specific spell - Twilight Sanctuary for the Twilight Domain Cleric. In the original file, the model was too tall and…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
it's a round cube with a 13mm metal ball inside What you need: 1. 12mm-13mm meta ball 2. Glue Assembly: 1. Place the metal ball in the cube halves marked with the "1" 2. Fill the holes of the cube half "1" with glue 3. Glue both cube…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
This is a License Plate mount I made because I refused to drill into the Bumper of my new car (and don't like how it looks when you put it in the windshield). So I made this. It clips around the lower Grill of some 2025 Ford Mavericks.…
Print approx. €3.29–€4.03 excl. taxPreliminary estimate for PETGSource material: PET
The Spherical Geneva Wheel This is a Geneva mechanism that uses F6901Z Flanged bearings to smoothly rotate when in operation. This model is great for learning how the Geneva mechanism works. It also makes a great desk fidget toy. The…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
This design is installable without the need to untie the brake handle and does not damage your lines but the installation is a bit tricky. you will need two M3x14mm hexagon socket head cap screws and two M3 nuts. to insert the nuts I used…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
The device consists of two printable items: Nozzle: This one in a print in place item that includes a spherical ball with a path for the filament in a way that this ball can freely move inside a dedicated cover. The filament is routed…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
I wanted a container to go in our fridge door shelving to hold cheese slices for daily doggo dosages.
Print approx. €5.17–€6.32 excl. taxPreliminary estimate for PETGSource material: PET
Ferrari, as usual, was represented by an excellent lineup of private cars. The fifth edition of the Carrera Panamericana was characterized by the duel between two Ferrari drivers: Umberto Maglioli driver of the “four-point-nine”, a 375…
Print approx. €7.92–€9.68 excl. taxPreliminary estimate for one variant
Lots of electronic devices with a North American 120V plug come with a plastic protector for the prongs during shipment. I wanted to try duplicating this product - this is the result. I used it as a protector for a TroyBilt Storm 2410…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Raise your kid right. That American Girl™ doll needs a weapon, because the peace ain't gonna keep itself! At 26% of actual size, this scaled-down RC1 is well suited for use by any 18" doll. And when she's not using it, it'll look lovely…
Print approx. €1.28–€1.57 excl. taxPreliminary estimate for one variant
I wanted a way to hold down my keyer, especially since this AME key has exposed parts that make it difficult to support with the other hand. The base allows a passthrough for the cable or installation of an audio jack, and then can be…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Since I don't own a Pinecil, but otherwise liked the Omnifixo Pinecil Case design by @PosterBored a lot, I replaced the Pinecil compartment with a generic compartment. I also had different magnets on hand (5x3 cylindrical), and I prefer…
Print approx. €5.53–€6.76 excl. taxPreliminary estimate for PETGSource material: PET
Chapa del Capitan América preparada en 3 colores para Prusa MK4 con MMU3
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for one variant
Mesoamerican Pipe
Print approx. €8.05–€9.83 excl. taxPreliminary estimate for one variant
Wanted a full color printable usa flag to put on all my metal stuff. American flag with spots for four Prusa standard 20x6mm bar magnets. Designed for INDX, XL, or MMU. Check out the whole MagFlag Collection Here Enjoying my models? Keep…
Print approx. €1.80–€2.20 excl. taxPreliminary estimate for one variant
Upside Down American Yellow Mustard holder Woeber's Genuine American Yellow Mustard Squeeze Bottle PETG Only Thank you
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
EN: For users with less experience in printing balls, I recommend reading the tips under https://www.printables.com/de/model/887687-garden-ball-rose-ball-rosenkugel-gartenkugel The easiest way is to print the set GCODE file, if you want…
Print approx. €4.00–€4.89 excl. taxPreliminary estimate for one variant
a very simple charm with the Pryda logo to use on kandi, etc
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Simple generic fly swatter, slip in and super glue it. My page on Prusa https://www.prusaprinters.org/social/93679-stoneman/prints My Thingiverse page https://www.thingiverse.com/stoney21/designs Print Settings Printer Brand: Creality…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
print in 25% infill paint on supports like so
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
These pieces have been scanned then modeled and should be reasonably dimensionally accurate to the originals. The original release included a rather odd 10.125" square checkerboard which I have also modeled and included as a multicolor…
Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant
I made a deckbox for any trading card game, it fits yu gi oh, Lorcana and magic the gathering cards.
Print approx. €9.64–€11.78 excl. taxPreliminary estimate for one variant
- 26 mm for precise medal ribbon fitment - Two M4 holes for screws, with hole cut - 65 x 40 x 36 mm - Angled hanger to prevent slipping
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for one variant
This is a hook for a controller holster. If you happen to have the LG Mini Split HVAC that I have, then this will work perfectly. However, if you're looking for something more generic, I have the “Holy” and “Unholy” remixes that will work…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
Je n'ai pas trouvé de pièce de remplacement dans le commerce. Celle ci n'est pas identique à l'originale, mais permet une attache propre de la coque avec un petit clip métalique tout en laissant passer la vis en son centre. Le fichier…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
A cover I desigend for the generic Jewel 7 LEDs I purchased on Amazon. The holes are aligned for this model of Jewel 7 LEDs with 2 holes to match the PCB that are M2 screw holes. This version allows the wires to exit from the side.…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2mm and the Actual…
Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant
Important announcement: I released version 2 of the multiconnect system for multiboard . This version is fully compatible , but also incorporates some handling and versatility improvements. I recommend to always print the new versions.…
Snap-fit ball joint with locking nut - Giunto Sferico ad incastro con ghiera di blocco Compact, reliable, and easy to assemble. The T-SSIC features a snap-fit spherical joint secured by a threaded locking collar (clamping ring). Ideal for…
Generic connectors to hang your bins/shelves or anything else to your multiboard, now in version 2. The connector is pretty generic and allows you to attach anything you want. Note: There also is a flush version of multiconnect for…
Use case: Once I had completed the slim 12mm lockable ball joint, I realized how super useful this kind of design is. While the lock is quite strong on the 12mm ball already, I figured there are probably use cases that require an even…
A generic hdd caddy for a 3.5" hard drive. The caddy uses 4 standartized pc case screws like https://www.aquatuning.co.uk/media/image/af/5b/d6/94577\_1\_600x600.jpg You can find a generic 5bay cage here:…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
Let me introduce you this Print in Place Airless Football - Airless American Football It is Original Size model. I have used generic TPU for ball Please, Use support blocker to block unnecessary supports, I have added other print settings…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) So, Captain America. Bit of a remake of the costume, since while I enjoy doing fan art I do want to add something of my own to it and…
the American Craftsman Bungalow Birdhouse! This birdhouse features two entrances, upper ventilation through the chimney and windows as well as sloped drains in the base to allow fluid to run out. There are multiple interior platforms…
A Native American drone flute in F# tuned to A = 432hz I noticed there were only a few drone flute files available online and I wasn't quite happy with the quality of them so I took it upon myself to design one that I was happy with. It…
A 3D model of an american football with the official measurements. I included two versions of the ball: The original one with all seams and the laces and one blank version to be able to create figures by substracting the ball from the…
BOM: Printed with ROSA3D High Speed PLA Pink This is the third and final variation of my decision dice collection. The Geometry: Unlike the chamfered or filleted cubes, this design is a Truncated Sphere . Imagine a perfect ball with 6…
There are a couple of ring size sets; the advantages of this one: size and shape of typical rings, rounded inside no tabs etc, so you can wear a ring for hours to check if it feels comfortable each ring has it's ring size imprinted in 4…
Credit where credit is due. I made this model based on a short video from MakeBreakRepair 's youtube channel about it. *NOT MY VIDEO* Thought it was a cool neat weekend project. Managed to get it no hardware required by using print in…
Overview Filament dryers have exit ports in less than ideal places. The filament often has to bend sharply to line up with the port, which is exaggerated depending on hoe much filamnt is left on the spool. This simple design prints in…
This is Fanart , so please don´t use this for commercial printing! Sculpted in Zbrush and the STL´s are orientated as i printed them. You will need supports on all parts. I printed the parts on my MK3S and had no problems, but i have a…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
UPDATE V005 Uploaded the template for the wrapping foil as a DXF. Any place that does vehicle marking should be able to work with this to plot the foil for you. Make sure they understand you want a ring and the star, or you might get a…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
3D MODEL DESCRIPTION Captain America's shield is a fictional weapon appearing in American comic books published by Marvel Comics. It is the primary defensive and offensive piece of equipment used by and emblematic of Captain America. It…
A detailed, high-tech miniature version of Cap's iconic shield. The model is 60 mm in diameter so it's ideal to put on a keychain or a backpack zipper pull. Print instructions Each part of the model can be printed separately in its…
This strange rolling riddle will make you think twice about how things roll! In a straight line? No! It rolls in an irregular pattern like pictured below. It gives you the illusion of rolling normally, then it fakes you out! It works best…
All my models are free but if you what I do you can support me on patreon: https://www.patreon.com/teirale You’ll find four files, of which “All in one”, “Body flat” and “Base'' are suitable for printing without supports, The “Body” file…
A generic 5 bay 3.5" hdd cage. Here is the 3.5" hdd caddy that goes with it: https://www.thingiverse.com/thing:4106276 I made a cage for the Thermaltake V21. I have not yet printed this exact model. However it works perfect for the…
Generic connectors to hang your bins/shelves or anything else to your multiboard. The connector is pretty generic and allows you to attach anything you want. This is the version of multiconnect optimised for usage with Underware and the…
Updates: 25.11.2022 - the block (bird) must be printed on its side, with supports. The slicer should generate supports between the two wings in front of the block. This has been forgotten when making the tutorial video. Crafty makers can…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Ball Joint - Sferical snap fit connector - Giunto Sferico ad incastro 25x45x50mm SSIC 25x50x50mm SSICs 25xØ50mm SSICr Update: 21/03/2025 Added Model SSICs and SSICr Higher mechanical strenght 17/04/2026 Added SSI_ST Resize to adjust…
