Search results: ew

Sort order

Counting matching models…

P
PrintablesBoogie

Screw measuring tool, M2-M10, 4-120mm

Based on the idea of the user Sneaks i made a measuring tool for metric screws. This tool can measure M2-M10 screws with a length of 4-120mm Printing instructions: 0,15 mm layer height no supports infill 15% rectangular infill 2…

Print approx. €2.47–€3.01 excl. taxPreliminary estimate for one variant

Downloads
94,140
Likes
29,444
Rating
4.93

The Original Dragon Egg - New & Improved for 2025

For the most up-to-date version of this design, check out the Makerworld version. It's the original threaded dragon egg, great for Easter egg hunts, gifts, and Game of Thrones fans. This is my made-from-scratch design from 2022 that has…

Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant

Downloads
67,969
Likes
11,893
Rating
4.93
P
Printablesfivesixzero

Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm)

UPDATE: 2022/12/14 No changes in this update, just a big thank you to everyone that's downloaded, posted a make, remixed, or re-shared this model! This was only the fourth model I shared and was the first ‘big project’ I took on while…

Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
33,746
Likes
14,406
Rating
4.96
P
PrintablesLuvem Studio

Screw Lock Carabiner

Carabiner with lock that I created for study For greater strength, increase the number of walls. Normally I use four walls but I recommend using five or more. The use of supports is required in the parts highlighted in the image. WARNING:…

Print approx. €3.61–€4.41 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
29,868
Likes
12,839
Rating
4.85
P
Printables3DPrintM.D.

Simple Universal Filament Clip V2+ {NEW 2024 VERSION}

Filament clip works on many spool brands including Prusament, Amazon Basics, Overature, Hatchbox, AMZ3D and others. Very simple design. Version 2+ , added March 15, 2024 incorporates slightly smaller filament clasps and reverses the two…

Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
26,379
Likes
4,545
Rating
4.81
P
PrintablesAKinferno

Articulated Axolotl - V2.7 (New PrusaSlicer fixes)

6/10/2023 - 2.7 posted. Thanks to SuperRoach for pointing out the floating pieces in PrusaSlicer. With the latest PrusaSlicer RC1, it renders the bottoms of the gills on the left side of the head floating. That wasn't the case previously.…

Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant

Downloads
20,139
Likes
1,442
Rating
4.9
P
PrintablesMaff

Astronomical Telescope "Hadley" - an easy assembly, high performance Newtonian

You can now purchase screw/mirror kits at Kissner Optik . Official Discord server here. New instruction manual is here! See “other files.” I recommend the Hill Mount, Marci Mount or EMT remix over the one featured here. Wooden ones still…

Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant

Downloads
16,933
Likes
4,590
Rating
4.95
P
PrintablesMike

wind-up Bathtub Boat V5 - with benchmark test - Badewannen Boot zum Aufziehen - Funktionsfähig

I would like to introduce to you the 5th version of my wind-up boat. After the 4th version i got a lot of feedack on Facebook, which I have implemented as well as possible. As you can see there is a much larger wind-up weel. The boat can…

Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant

Downloads
15,963
Likes
8,063
Rating
4.92
P
PrintablesMalolo

Malolo's screw-less / snap fit Raspberry Pi 4 Model B Case & Stands

Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…

Print approx. €1.65–€2.01 excl. taxPreliminary estimate for one variant

Downloads
12,788
Likes
2,251
Rating
4.96
P
Printablestree

Gear Cube Fidget (No Screws)

Super fun, Easy to print, Relaxing Gear Cube Fidget! This prints very easy and fast and just clicks in during assembly! How to assemble: Begin by putting all the pins into the core Put on the bigger gears on the bigger areas Put on the…

Print approx. €3.65–€4.46 excl. taxPreliminary estimate for one variant

Downloads
10,834
Likes
1,512
Rating
4.83
P
PrintablesJordanK

NEW VERSION 3.5 with XL Lid: Steamdeck USB-C Charger Cradle (for USA plug only)

Just took delivery of my new Steamdeck and decided to design a storage tray to easily store your USB-C charger and MicroSD cards in the cavity on the bottom of the official Steamdeck carrying case that comes with the Steamdeck. The design…

Print approx. €4.29–€5.24 excl. taxPreliminary estimate for one variant

Downloads
9,318
Likes
821
Rating
4.8
P
PrintablesVojTech3Dprints

Kit card plane (NEW FLAPS)

!!! REPAIRED FLYING PARTS !!! CZ/SK Jedná se o model trojplošného letadla Fokker Dr.1. Jde o méně náročný model na složení. K dispozici jsou nové klapky (Flaps), při tisku buďte pozorní které soubory používáte (jsou označeny vždy buď OLD…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
8,662
Likes
3,342
Rating
4.88
P
PrintablesNilsGFX

Mewtwo Pokemon

A 3D scanned statue of Mewtwo. Requires supports around the tail, hand and best case also between the legs. Printed with PLA at standard Prusa settings for MK3S at 0.2mm!

Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant

Downloads
6,698
Likes
760
Rating
4.62

🗲 Full-Size Mjolnir 3-piece screw together (Thor's Hammer) 🗲

PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…

Print approx. €4.43–€5.41 excl. taxPreliminary estimate for one variant

Downloads
5,275
Likes
1,648
Rating
4.91
P
PrintablesDivixolin

Elegoo Neptune 4/4PRO Cable Chain (New 90deg mount & Z mount to connect chain)

Tried to adjust the Z-mount and the 90 degree extruder so that another chain can be attached in X-direction. Unfortunately I only had the STL files available, so there might be small errors in the mesh. Didn't want to re-model the model…

Print approx. €1.05–€1.29 excl. taxPreliminary estimate for one variant

Downloads
4,978
Likes
400
Rating
4.5
P
PrintablesCarlos Luna

Skew Dice

Skew Dice™ Disclaimer: The commercial version of the Skew Dice™ was designed by Robert Fathauer and Henry Segerman . Indeed, Skew Dice™ is a trademark of their company: The Dice Lab . Please, go buy some of their amazing products! These…

Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant

Downloads
4,959
Likes
543
Rating
4.95
P
PrintablesMike

mini Wind-Up Boat Dual Drive - screwless - full 3d printed

I love these little boats! This time with dual drive! Now the boat goes much further, lasts longer and, above all, it finaly goes straight ahead! The drive spiral is made of PETG this time. This works much better than PLA. All parts are…

Print approx. €0.90–€1.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,758
Likes
1,203
Rating
4.46
P
Printablesmaxwxyz

Screw Claw for Screwdriver and Bits

Screw claw to hold screws in front of the screwdriver. Allows easy and one-handed screwing without the screw falling off the bit. You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz Place the screw claw on the front of…

Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
4,365
Likes
1,816
Rating
4.86
P
Printablesemmgr23

Flipper Zero Case (NEW V2 available, check description)

A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,784
Likes
965
Rating
4.81
P
Printableshashizo

Gravity knife fidget toy extended (no screws)

The original size was a little small for hand holding, so the overall length was extended. Please be careful not to injury. -Update- I have made an update to add a small edge to the shape to allow for better finger hooking. There is no…

Print approx. €4.89–€5.98 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,644
Likes
404
Rating
4.75
P
Printablesfigterk

LTT Screwdriver Bit Holder (Multiple Sizes)

This is a holder for the extra bits that can be ordered for the LTT screwdriver. 12, 24, 36, 48 and 60 bit versions. The outer case is a single print with a print in place hinge. The inner bit holder part is meant to be print with…

Print approx. €5.87–€7.18 excl. taxPreliminary estimate for one variant

Downloads
3,505
Likes
436
Rating
4.86
P
PrintablesPhilippHee

Metric Screw and Nut Measuring Tool

Metric Screw and Nut Measuring Tool This is a remix of the great measuring tool from cmh . Link: https://www.prusaprinters.org/prints/38356 Remix Information I added hexagonal holes on the back to measure the nuts of the corresponding…

Print approx. €1.65–€2.02 excl. taxPreliminary estimate for one variant

Downloads
3,466
Likes
457
Rating
4.96
P
Printablesprintfutura

Weekly Pill Case / Organizer with Personalized Monogram Screw

Pill organizer / vitamin reminder with a labeled slot for each day of the week. To use, loosen the screw 1 turn and twist the lid to the current day. The lid & screw are fully removable to refill the container at the end of the week. To…

Print approx. €5.39–€6.59 excl. taxPreliminary estimate for one variant

Downloads
3,322
Likes
426
Rating
4.92
P

Low poly Mew

Low-poly model of the Pokémon Mew.

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant

Downloads
3,174
Likes
460
Rating
4.95
P
PrintablesJerrari

DeWalt Battery Holder

DeWalt Power Tool Battery Holder This holder is designed to hold DeWalt 20v Batteries. Designed based on a 3D scan of the DeWalt Battery and refined for a snug fit. Print instructions HARDWARE • Screws: x2 wood self tapping countersunk…

Print approx. €1.78–€2.18 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,134
Likes
554
Rating
4.73
P
PrintablesKeegan

Animal Crossing New Horizons Player's House

I made this model based on my fiancee's ACNH house. I scaled it to fill a i3, but printed it myself at 50% scale. The only issue with that size was the door nob breaking off. Broken into different parts so they can be printed in different…

Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant

Downloads
3,073
Likes
687
Rating
5
P
PrintablesJirka

Large screwdriver holder with honeycomb pattern

Large screwdriver holder with honey comb pattern. The holder is very sturdy overall. Dimensions 220x114x45 mm. 9 mm hexagon (suitable for medium and larger screwdrivers). Wall mounting with two or four screws. Very easy to print in PETG,…

Print approx. €9.85–€12.04 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
3,063
Likes
881
Rating
4.83
P
PrintablesBen

M2 - M10 Phillips Screws in all sorts of lengths (incl. STEP)

A collection of Phillips screws according to ISO 724 , ranging in sizes from M2 to M10, each available in lengths of 10 mm, 16 mm, 20 mm, 30 mm, 40 mm, 50 mm and 60 mm, 70 mm, 80 mm, 90 mm and 100 mm. All screws have the following…

Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant

Downloads
3,038
Likes
1,164
Rating
4.5
P
PrintablesDusBus

Screwable pill container

I wanted something simple, rugged and compact to EDC one pill of Ibuprofen, without its packaging being damaged by other tools I'm carrying in the same pocket. It was my first attempt at designing something with a thread in FreeCAD and it…

Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,526
Likes
482
Rating
4.93
P

Minimalistic Tree Jewelry & Ring organizer

I wanted a little organizer for my hair ties and jewelry, so I made this little low poly tree. Prints with no supports and no extreme overhangs. The tree just slides in the base after printing. 0.2mm layer height PLA I've used these…

Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant

Downloads
2,391
Likes
852
Rating
5
P
Printablesclivebradshaw

Metric screw measuring device

This is a great design by Sneaks at https://www.prusaprinters.org/prints/3408-quickly-measure-sort-m2-m3-m4-m5-metric-screws-up- but also to cmh at https://www.thingiverse.com/thing:4154091 for sanitising this for me (version with no…

Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant

Downloads
2,347
Likes
347
Rating
4.92
P
PrintablesTinkrMakr

Sewing Cloth Tape Measure Winder Case 14mm and 18mm Snap Fit

Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit. Assembly (see photos): Push tape through thinner slot, same side as winding hole. Fold tape and reinsert from back. Pull tape tight trying to keep the…

Print approx. €0.84–€1.03 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,341
Likes
656
Rating
4.7
P
PrintablesPeopleware

Präziser Filament Aufwickler (opt. Akkuschrauber und Motormodul) - Filament winder with opt. cordless screwdriver

Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,224
Likes
321
Rating
4.8
P
PrintablesJirka

Large massive screwdriver holder / Masivní držák pro šroubováky

Large semi-circular screwdriver holder, honeycomb pattern. Large, sturdy and universal holder for small and medium size screwdrivers. Relatively long but easy to print.

Print approx. €12.57–€15.37 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
2,058
Likes
823
Rating
5
P
Printablesanimatorgeek

Improved Fast-Printing Screw-Top Desiccant Container (v2)

This is a new, improved version of my original vase-mode desiccant container. I changed the side holes to extend inward rather than outward, so the outer surface is much less likely to poke holes in your filament storage bags. Total print…

Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,968
Likes
464
Rating
4.95
P
Printablessquinn

Jewelry Organizer Stand

An elegant stand to help organize and hold jewelry of different shapes and sizes. Includes a recessed tray on the bottom for smaller items such as earrings, and the three arms can then easily accommodate bracelets, necklaces, anklets,…

Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant

Downloads
1,934
Likes
522
Rating
4.9
P
PrintablesSaddamCZ

Watch and jewelry stand for ladies

A stand for four small ladies' watches with a bowl for small jewelry in the base. Note: I see that quite a few people use the stand for bigger watches – if that's your plan too, consider scaling the model up considerably. The original…

Print approx. €9.23–€11.28 excl. taxPreliminary estimate for one variant

Downloads
1,924
Likes
381
Rating
4.83
P
Printablescdlong

Screw measuring tool, imperial

Based on the metric versions developed by users Boogie and Sneaks, this version is meant to help measure and sort Imperial fasteners, from #2 up to ½" in diameter and up to 6 inches long. It was designed in Onshape. Printing Instructions…

Print approx. €4.21–€5.14 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,693
Likes
237
Rating
5
P
PrintablesJohn

Skewed Funnel

No support No brim

Print approx. €3.08–€3.77 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,642
Likes
191
Rating
4.94
P
PrintablesEmkatech (Mike)

Knurled Screw Heads for Hex Bolts (M3–M12)

This set includes knurled screw heads designed to fit hex bolts according to ISO 4017 . The bolt length can be freely chosen, giving you maximum flexibility for your projects. The design also accommodates matching washers according to ISO…

Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant

Downloads
1,600
Likes
624
Rating
5
P
Printableshtkoca

Redux Bambu Lab Silica Gel Desiccant Tray - For New AMS v3

Remixed with bottom chamfers for better bed adhesion. No supports needed Fits new AMS ribs. Use a rubber band to hold the sides together Original model by @muddtt had fillets, which was a pain to print with ABS and other materials…

Print approx. €1.39–€1.69 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,579
Likes
127
Rating
4.91
P
PrintablesDIY Machines

Build a COLOUR E-INK DASHBOARD - Weather | Calendar | Photos | News...

Please consider pressing the like button above.⬆ and downloading the files. It really helps me out with these projects. Thank you. 😊 Hi, I’m Lewis and this is DIY Machines. The channel where I show you step-by-step how to make awesome…

Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant

Downloads
1,569
Likes
2,337
Rating
5
P
PrintablesBenoit

Stitch Jewelry Stand

Stitch Jewelry Stand modeled by Agouro I resized to 9cm height and rotated to print on the back to get less supports (everything included in the gcode). Post-processing : gesso, acrylic paint and satin varnish for acrylic.

Print approx. €6.17–€7.55 excl. taxPreliminary estimate for one variant

Downloads
1,566
Likes
332
Rating
5
P
PrintablesJohn

Jewelry tree

Simple tree jewelry holder. Print instructions Version edited means that stl files have been changed for Prusa MK3/S/S+. All you have to do is download and slice them. Version 100 means the stl files are unedited but they are larger than…

Print approx. €2.40–€2.94 excl. taxPreliminary estimate for one variant

Downloads
1,559
Likes
293
Rating
5
P
PrintablesEldenroot

Rapid Screw Measuring Tool - SLIM edition

This is the remix of the Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm) from @fivesixzero. This is a SLIM version - shorter printing time, less weight, slim design… but top quality stays untouched! :) Remixed Things I made few…

Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,539
Likes
235
Rating
5
P
PrintablesMiguel M.

DeWalt Miter Saw Zero Clearance Insert

This is a zero clearance insert for Dewalt miter saws. I modeled it from the insert on my own saw wich is a DW716 (12inch, dual bevel, NON sliding) from what I can tell from the replacement inserts on amazon, this will fit models:…

Print approx. €3.71–€4.54 excl. taxPreliminary estimate for one variant

Downloads
1,515
Likes
268
Rating
4.91
P
PrintablesMatt Boyer

DeWALT Battery Holder

A simple battery cradle with a color change to pop out the brand name. Can be standing on your bench or mounted on the wall. The infill is strategically modified to withstand use and mounting. Open hex pattern allows you to press and see…

Print approx. €5.71–€6.98 excl. taxPreliminary estimate for one variant

Downloads
1,464
Likes
248
Rating
5
P
PrintablesCool models

Long Aquarium Viewing Cave

I've been enjoying making nooks and places for my shrimp and fish to hang out in. Caves are a great addition and really expand the unused space of the substrate.

Print approx. €1.95–€2.38 excl. taxPreliminary estimate for one variant

Downloads
1,460
Likes
347
Rating
4.71
P
PrintablesAK3D

Multi-purpose keychain with screwdriver and integrated rule

This practical keychain is an essential accessory for those who love to be always prepared. It transforms into a screwdriver when needed. Inside, you can insert two interchangeable tips: one flat and one cross, each 25 mm long, perfect…

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,436
Likes
536
Rating
4.67
P
PrintablesDvG3DAtelier

Prusa Core One Buddy3D Camera Angle Mod – Better View, No Collision, Round Magnet Mount

I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…

Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,389
Likes
418
Rating
4.99
P
Printablesredangel1984

Customizable Box For Screws/Nuts/Washers etc.

If you like it feel free to leave a comment or buy me a "coffee": https://www.buymeacoffee.com/redangel1984 These little (or bigger) boxes can be stacked on your desk or glued using double sided tape under the edge of a table or shelf to…

Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant

Downloads
1,376
Likes
145
Rating
4.88
P
Printablesdandos23

DeWalt Jigsaw DCS331

This is a basic wall mount for a DeWalt jigsaw (DCS331). Its designed to be quite snug so that the tool doesn't slid out if you want to mount it under a shelf. I printed it with 6 perimeters and %40 infill as I wasn't sure how strong it…

Print approx. €11.21–€13.70 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,295
Likes
218
Rating
5
P
PrintablesBlockhead Maker

True - Wire Bender for making Shallow Screws

For all makers out there making soft bates! Shallow screws are expensive and now with this tool you can make them yourself. Print instructions Video for how it works: https://youtu.be/zpEGzjKB8no Other needed components: Screw holder is…

Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant

Downloads
1,291
Likes
184
Rating
5
P
PrintablesCalebTimoteo

Ewok Treehouse - Star Wars Pen Holder/Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant

Downloads
1,283
Likes
441
Rating
5
P
PrintablesAUGU5TO

Calibration Cube - wall thickness - new filament - extrusion

Description This is a fast and easy to print model to calibrate your new filament. It can be used to find the right settings for the extrusion factor to get the right wall thickness. It is designed with a 0.86 mm wall thickness to meet…

Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant

Downloads
1,267
Likes
89
Rating
4.95
P
Printablesrahix

Honey Comb Screwdriver Holder Screw Mount Improved

A very minor improvement to the screw mount remix of the honey comb screwdriver holder. This version Has fillets/chamfers around the outside edges to make it more pleasant to touch. The screw holes are slightly widened for M4 countersunk…

Print approx. €2.58–€3.16 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,244
Likes
318
Rating
5
P
Printablesmeet

Office Paper Clip - few minutes print!

Emergency office paper clip set You can choose from four sizes S (3 cm), M (4 cm), L (6 cm) or XL (8 cm). They're not perfectly strong like their metal counterparts, but they'll work as emergency paper clips and you can print them out in…

Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant

Downloads
1,243
Likes
197
Rating
4.75
P
PrintablesHedo3D

shaun the sheep V2 - new face - toilet roll - easy print

shaun the sheep toilet paper roll stand this is a complete new head design, print in 2 parts für quick and easy printing without support, legs print in vase mode the eyes print with color change at layer height 4,4mm glue the head parts…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
1,242
Likes
317
Rating
4.77
P
PrintablesTerence

MMU2S Idler Tension Screw Retainer & Thumbscrew

A solution to eliminate the hide and seek game every time the MMU2S door is flipped. No disassembly or extra components required, reuse existing tension screws and springs, I printed the bases separately in a darker colour and I can…

Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant

Downloads
1,219
Likes
228
Rating
4.74
P
PrintablesLYOTRADE

DeWALT / Makita drill gun shelf hanger holder

Lets hang your DeWALT / Makita drill gun under your shelf! Designed for DeWALT DCD791, but it works also with Makita 6270D and probably with other similar models from different brands. Be sure to check also my other DeWalt hanger holders:…

Print approx. €19.63–€23.99 excl. taxPreliminary estimate for one variant

Downloads
1,216
Likes
215
Rating
4.92
P
PrintablesDavid Martinek

Ubiquiti Unifi AP stand (All in 1, NO SCREWS needed!) - Updated: LR / Pro / Nano / Lite

UPDATE 20.1.2024 - added versions - AP: LR / Pro / Nano / Lite Complete stand + mounting bracket for Ubiquiti Unifi AP. The model is All in one, so it can be printed as one piece without need for screws. You just click it on. In the 3mf…

Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant

Downloads
1,206
Likes
92
Rating
5
P
Printablespejvl2000

Screws labels for Gridfinity Bin

Screws labels with pictures of DIN912 screws

Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant

Downloads
1,201
Likes
440
Rating
5
P
PrintablesN3XT3D

Ground Screw for Automower (Husqvarna, Gardena and Other Brands)

Longer Version (13.04.2026): Upon request, I created a longer version that is better suited for loose soil. Despite its height, this screw can still be printed on the Prusa Mini. As with all models, no supports are required. Please note…

Print approx. €2.23–€2.73 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
1,183
Likes
154
Rating
5
P
Printablesannki

Jewelry Stand for Earrings

A minimalistic stand for earrings with lots of storage for studs and hangers. This jewelry stand for necklaces was printed on the prusa mini which limited the dimensions to 178 mm in height and width. Feel free to modify those to…

Print approx. €1.42–€1.74 excl. taxPreliminary estimate for one variant

Downloads
1,172
Likes
358
Rating
4.5
P
PrintablesH3phaestus42

DeWalt Tool Holder

Original model by RiversCo on thingiverse

Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant

Downloads
1,134
Likes
102
Rating
4.88
P
Printablesannki

Jewelry Stand for Necklaces

This is one of my first tries at 3D models. The jewelry stand is somewhat minimalist and reminds me of a castle. This jewelry stand for necklaces was printed on the prusa mini which limited the dimensions to 178 mm in height and width.…

Print approx. €1.31–€1.61 excl. taxPreliminary estimate for one variant

Downloads
1,106
Likes
193
Rating
4.8
P
Printables3DJG

Screw lock carabiner (UPDATE-2)

Screw lock carabiner Typical climbing carabiner to customize with your favorite colors. Model with screw lock Note: Do not use for climbing The model has been projected with catia V5 Assembly: A little force must be exerted to mount the…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant

Downloads
1,066
Likes
133
Rating
5
P
PrintablesDIY Machines

Model RC Steam Train with steam effect, live view camera and working lights. Controlled from your phone.

3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…

Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant

Downloads
1,014
Likes
216
Rating
5
P
PrintablesMrHanjak

Doctor Who - Sonic Screwdriver 9-10th Doctor (The Ninth/The Tenth Doctor's) 2005 (NO SUPPORTS)

🔵 Sonic Screwdriver of 9-10th Doctor 🔵 This screwdriver had the 9-10th Doctor and briefly in Season 5 the 11th Doctor. For a long time I wanted to create a sonic screwdriver of 9-10th doctor but I didn't have a time, today I finally had a…

Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant

Downloads
1,005
Likes
280
Rating
4.8

Home Brew Bi-Color Filament!

Hi all! I'm Joshua, and I'm a serial complainer. Today's complaint: Usage Rights. This form of 3D printing is not new, I was inspired by it years ago and it recently came back into my ethos. There are other artist who have posted the…

Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant

Downloads
997
Likes
217
Rating
4.89
P
PrintablesRokkdaddy

MK4 Z-Screw Motor Cover

Simple Z-Motor Debree cover, fits perfectly into the large opening on the Z-Motor mount blocks. Used the MK4 printable parts to get an exact fit. Make a mirrored version in the slicer. enjoy!

Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant

Downloads
990
Likes
200
Rating
4.92
P
Printables05WEL

Dewalt Tool Mount

Dewalt Tool Mount If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal). Thanks!

Print approx. €4.57–€5.59 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
981
Likes
90
Rating
4.75
P
PrintablesMatt Boyer

Wall Bracket for Dewalt Stick Vacuum

My Dewalt Stick Vacuum is quickly becoming my favorite tool. SUPER cheap compared to a Dyson. I already have several Dewalt 20v batteries, and it's right at home in the garage for a quick tidy. Only problem was: there was no wall mount…

Print approx. €5.72–€7.00 excl. taxPreliminary estimate for one variant

Downloads
958
Likes
134
Rating
5
P
PrintablesFlashTech

Screw measuring tool, M2-M5, 4-50mm, MultiColor (MMU)

I used PrusaSlicer to split/merge models from https://www.thingiverse.com/thing:4635654 to make embedded text.

Print approx. €1.56–€1.91 excl. taxPreliminary estimate for one variant

Downloads
931
Likes
120
Rating
4.92
P
PrintablesGBO35

Screw measuring tool MMU

Remix of @Boogie. This remix is compatible with MMU This tool can measure M2-M10 screws with a length of 4-120mm

Print approx. €4.75–€5.81 excl. taxPreliminary estimate for one variant

Downloads
881
Likes
125
Rating
4.85
P
Printablesian123411

Dewalt DCS391 Circular Saw Holder/Hanger

i made a hanger/holder for my dewalt DCS391 circular saw it has 15% infill and 4 perimeters just retract the blade up as high as it goes and place it in the hanger whilst pulling the guard back

Print approx. €12.65–€15.46 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
880
Likes
122
Rating
5
P
PrintablesMordiev

MMU2s Tension Screw Retention Washer

Every time I loosen up the two Idler tension screws and open the MMU2s one or both of the screws and their springs would fall out. They would bounce around and play a mean game of hide and seek. So I made these little guys. Literally the…

Print approx. €0.05–€0.06 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
854
Likes
78
Rating
4.78
P
Printablesmaxmar

Adjustment Jig for DeWalt DWE 7492 and DWE 7485 Table Saw

This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…

Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant

Downloads
797
Likes
122
Rating
5
P
Printablesschuetzi99

Bit holder for hexagon screw bits

Bit holder for hexagon screw bits New version available: Klick here Of course, there are already different bit holders here. The special thing about this one is that you only need very little filament to print it, and the printing is very…

Print approx. €0.43–€0.53 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
776
Likes
122
Rating
4.88
P
PrintablesCraftCadet

hanging mount for Universal auto rewind spool holder

Ceiling or under shelf hanging mount for the Universal auto rewind spool holder. with dust filter. A huge thank you to Vincent Groenhuis for his brilliant spool holder.…

Print approx. €2.10–€2.56 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
772
Likes
83
Rating
4.8
P
PrintablesPoke2

kleine Aufbewahrung Box mit Deckel / small storage box with lid

Eine einfache kleine Aufbewahrungsbox mit Deckel aus PLA. Ist fast ident wie meine Feuchttücher Box, nur der Deckel hat mehr Spiel und für das Gelenk habe ich 2x Schrauben M3x12 mit 4x Beilagscheiben und 2x Sicherungsmutter vorgesehen. A…

Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant

Downloads
735
Likes
53
Rating
5
P
PrintablesAllpa

Gewürzregal (Rondel) für Ankerkraut-Gläser / Spice rack (rondel) for Ankerkraut jars

Es gibt eine vollständig überarbeitete neue Version: Gewürzregal als Rondel für Gewürzgläser von Ankerkraut. Es passen 6 Gläser auf jede Ebene, die Anzahl der Etagen kann beliebig zwischen 1 und 4 gewählt werden. Natürlich lassen sich…

Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant

Downloads
720
Likes
118
Rating
4.5
P
PrintablesMakerRonald

Clay cutting for jewelry

Sjablones for cutting clay for making jewelry

Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant

Downloads
718
Likes
213
Rating
5
P
PrintablesJKM

Roboter tool - measuring TCP/Base - new BOX

New box for holding magnets. - 2x washer up to 24mm diameter, inner diameter over 8mm, 2mm height - Insert into box during printing https://www.printables.com/model/1469521-roboter-tool-measuring-tcpbase

Print approx. €5.18–€6.33 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
717
Likes
13
Rating
0
P
PrintablesWOWA IIID

MK4 Z-Cover halfcut - protect the Z-Axis/Screw/Motor

A must-have for the MK4! The trough of the Z-spindle is protected from falling filament pieces, and thanks to the two halves, it's also easy to install. Absolutely essential for every MK4 owner! With this ingenious accessory, the trough…

Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant

Downloads
716
Likes
136
Rating
5
P
PrintablesCrafty Sven

Long tube screw top sotrage

Storage ideal for pencils, small files or anything which is about 150 mm long. The tube itself is about 170mm tall and has a nice fit screw top. Print instructions G-code for mk3s and mini included. Happy printing

Print approx. €5.13–€6.27 excl. taxPreliminary estimate for one variant

Downloads
707
Likes
68
Rating
5
P
PrintablesSatellietje

Sewing machine bobbin clip

*** You are doing me a big favor by clicking the Like button :-) *** This is simple to print without support. Glue the two parts together.

Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant

Downloads
701
Likes
306
Rating
4.88
P
Printablesrorys3D

Ring holder and jewelry tray

Holder for rings and small jewelry. Smooth fluid design. No special printing requirements. I used Prusament PLA Blend Lime Green , very nice filament. Also check out: https://www.youtube.com/channel/UChKp-968z1i5PN29gbR7YfA…

Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant

Downloads
694
Likes
173
Rating
4.71
P
PrintablesHugo

Robust climbing Stick Clip that screws on painter/squeegee extensible pole

I liked the idea behind this design , but it was too flimsy, even printed on PETG it kept breaking when dropped on the floor. This is designed for the Black Diamond “HotForge” carabiner from their quick-draws, but should fit any of the…

Print approx. €2.62–€3.21 excl. taxPreliminary estimate for one variant

Downloads
689
Likes
71
Rating
5
P
Printableskaje

SHCS (Socket Head Cap Screw) Knob Caps - Inch and Metric - Four Styles - Multiple Sizes

UPDATE : [May 14, 2024] Added STEP files. NOTE : This set of prints is now complete, with the sizes and dates added as follows : 05/18/22: #4,#6,#8,M2,M3,M4 05/10/22 : #10, M5 05/19/22 : 1/4",M6 05/10/22 : 5/16", M8 05/19/22 : 3/8",M10…

Print approx. €0.06–€0.07 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
685
Likes
87
Rating
5
P
Printablesaustin simon

Fortnite new medallions chapter 5 season 2

This is the new chapter 5 season two medallions

Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant

Downloads
682
Likes
31
Rating
0
P
PrintablesPauMeiker

Sewing Tool: Drawstring Threader

🧵✨ If you are tired of struggling with re-threading drawstrings on your clothes, you need to try this 3D printed version of a Drawstring Threader ✨ Available in five different widths (6mm, 9mm, 12mm, 15mm, and 18mm), our threader needles…

Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant

Downloads
676
Likes
408
Rating
5
P
PrintablesBodo

Stackable Insertbox - feet and variant overview (Sortimo/Bosch/Auer/others)

This page includes the overview for all stackable insertboxes - Insert boxes overview all related accessories - Accessories description for the insertboxes feet, which will fit all variants - Insertbox Feet description for the system -…

Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
674
Likes
156
Rating
4.63
P
Printablespmeineke

New Orleans Saints Logo

New Orleans Saints The bottom black part is printed separate from gold and glued in (STL). G.code has it as one piece.

Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant

Downloads
662
Likes
68
Rating
5
P
PrintablesFC2M3D

E14 Lamp Socket Ring Nut Screw

Simple yet useful. I made in PETG Infill: 20% Layer Height: 0.2mm Supports: No If you like my work consider Buy me a coffee 😊

Print approx. €0.18–€0.22 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
662
Likes
49
Rating
5
P
PrintablesMarin

Sewing Machine Thread Spool

Updated to v.1.5 . Reinforced locking cone. This side is completely flush. On the opposite side, the tube is extended by 0,5mm. Spare sewing machine thread spool to rewind thread from big one (for overlock machine) to home sewing machine.…

Downloads
658
Likes
100
Rating
4.75
P
Printablesrbelnienk182

Minimalist Jewelry Stand – 3D Printed Ring, Necklace & Bracelet Organizer

This minimalist 3D printed jewelry stand is designed to organize and display necklaces, bracelets and rings while keeping your dresser or vanity clean and elegant. The stand features two horizontal bars at different heights , making it…

Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
654
Likes
95
Rating
3.67
P
PrintablesAsa

DeWalt bit holder, impact driver and standard drill

I based the design on a model by georgeprout on thingiverse - I added space for two more bits Original stl and SCAD file here: https://www.thingiverse.com/thing:4395136 This is a bit holder for 6 standard quarter-inch bits for a DeWalt…

Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant

Downloads
651
Likes
115
Rating
5
P
PrintablesAztec

Short & compact screw measuring tool M2-M12

Thought the versions that existed were lacking by either being too big to keep in a tool belt or didn't have common screw sizes over M5. Also made a version with common pneumatic couplings that are commonly used in my industry. Printed…

Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant

Downloads
634
Likes
63
Rating
4.88
P
PrintablesRylie Pavlik

90 Degree Right-Angle Bracket for household repairs (#6 screws, customizable)

While you are staying safe at home, you might have something break that you'd typically go buy a replacement or perhaps a repair bracket for. (For example, the snack drawer's increased contents and enthusiastic children might result in…

Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
613
Likes
67
Rating
5