Search results: exhaust

Sort order

1,725 models

P
PrintablesChrisfu

Quick connect exhaust hose mounting sets for portable ACs and dryers various sizes === no supports ===

I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…

Downloads
3,472
Likes
1,008
Rating
4.91
P
PrintablesGunter

Mk4S heatbreak exhaust duct

Following the discussion here, https://forum.prusa3d.com/forum/english-forum-original-prusa-i3-mk4-general-discussion-announcements-and-releases/heatbreak-fan-might-be-causing-asa-abs-warping/ the heatbreak fan might be causing issues due…

Downloads
686
Likes
241
Rating
4.97
P
PrintablesJulek

Aircon exhaust ventilation grille

Ventilation grille for a wall mounted hot air exhaust with 120 mm diameter. You can print the cutout template to get the correct hole size with a Dremel.

Downloads
319
Likes
46
Rating
5
P
Printablesjesh

Lado Exhaust Duct - Low Profile Side Exhaust Duct for the Core One

General Info: Duct protrudes 75mm from back face of printer. I haven't done any super scientific tests, but I haven't been able to see a difference in cooling performance compared no duct. I'm pretty consistently 7-8C over ambient at 40%…

Downloads
280
Likes
159
Rating
4.8
P
PrintablesGunter

Mk4 heatbreak exhaust duct

Following the discussion here, https://forum.prusa3d.com/forum/english-forum-original-prusa-i3-mk4-general-discussion-announcements-and-releases/heatbreak-fan-might-be-causing-asa-abs-warping/ the heatbreak fan might be causing issues due…

Downloads
186
Likes
39
Rating
4.89
P
PrintablesJ. Kaiser

Hose holder for exhaust hoses 100mm

I was at the hardware store and shocked at how expensive these holders are. So I looked on the Internet and found similar prices. Now here is a design for a hose holder that costs a quarter of what injection molded holders cost. This…

Downloads
162
Likes
25
Rating
5
P
PrintablesDeBeard

PC REAR EXHAUST VENT FOR PHANTEKS ECLIPSE P400 CASE

Redirect the airflow from your PC's rear exhaust fans upwards and away from the wall. The purpose is to expel hot air in a direction that prevents it from circulating back into the case through the lower slots. Originally designed for the…

Downloads
145
Likes
26
Rating
0
P
PrintablesPeter Main

Exhaust/Recirculate Selectable HEPA Filter Fan for enXLosure

Suitable for everyone: You are about to print/build your enXLosure and want to include a HEPA filter. You might incorporate a HEPA filter in the future and want to be prepared. You want to retrofit your enXLosure with a HEPA filter. There…

Downloads
134
Likes
25
Rating
5
P
PrintablesVisualReversal

Original Prusa Enclosure (OPE) Magnetic Exhaust Port System (No MMU Needed)

I needed a way to vent fumes for an upcoming project and that hexagonal cutout at the back of the Original Prusa Enclosure seemed like the perfect spot for an exhaust port. I turned to Printables.com hoping to find my work done for me.…

Downloads
102
Likes
46
Rating
5
P
PrintablesMelbo

Exhaust plug Yamaha TTR110

Used @quirtz great parameterized plug to create an exhaust plug for washing a Yamaha TTR110 without getting water in the exhaust. I used ASA and fuzzy skin give it a little more grip but smooth and PLA should be fine. Both codes attached…

Downloads
74
Likes
3
Rating
5
P
Printablesbattlefrog

98mm Exhaust Elbow w/Backflow Valve and Flange

This version of the 98mm elbow includes a backflow valve, flange coupler band and lock. These files include proper settings to print as they are. No tools necessary. Printed with PLA on a Prusa MK3S+ with a .4mm nozzle and .3mm resolution.

Downloads
52
Likes
7
Rating
0
P
PrintablesReypatey

Vent Cover for 125mm exhaust pipe, Abluftschlauch Klimaanlage

A Vent Cover for my air conditioner. The inner diameter is 120mm, outer diameter is 142mm. Hole spacing is 22.5 degrees, 65.5mm off center. The flange is 11mm wide. Thickness is 4mm. It fits this duct hose connector (that's why the…

Downloads
34
Likes
1
Rating
0
P
Printablest0b1

Exhaust hose wall mount

Wall mount for the exhaust hose of our aircon. The hose has an ID = 150 mm (approx. six inches). You can use two of them to connect two pieces of tubing. Update: added a slightly taller variant with a grille. See also our hose connector:…

Downloads
28
Likes
9
Rating
0
P
Printablessgeissler

Spacer for Lado Exhaust Duct

This is a simple 4mm thick spacer frame for the Lado Exhaust Duct by Jesh for the Prusa Core One to increase the clearance on the left. I added little grooves, to which I superglued a rubber lip for additional sealing and vibration…

Downloads
8
Likes
3
Rating
0
P
PrintablesBenCh

Scroll Pump Exhaust Filter DN25

Container to hold HEPA filters and mount to exhaust (DN25) of scroll pump. Intended purpose was to capture scroll tip dust and reduce contamination of floor. Our system is UHV and noble gasses. Not advised for systems that have…

Downloads
6
Likes
1
Rating
0
P
PrintablesCoral

ReVent Exhaust/Extraction Fan Duct

This is a duct that you can attach to a $20 bathroom exhaust fan. I got the ReVent 50 CFM Quick Install Professional Ceiling and Wall Mount Easy Roomside Bathroom/Bath Exhaust Fan. The inlet is for a 4 inch hose. It has a rib so you can…

Downloads
6
Likes
1
Rating
0
P
PrintablesEskichagar

Sortie évacuation touret à meuler - workshop Grinding wheel exhaust outlet

La poussière de meulage produite par mon touret salissait le mur derrière ; j'ai donc réalisé cette évacuation pour détourner le flux de saleté vers le bas. Impression rapide en PETG, buse 0.4mm, hauteur de couche 0.28mm (mode draft) car…

Downloads
4
Likes
0
Rating
0
P
Printableseds_3d_shop

Eds powerfull magnetic Bambu Lab X1 / P1S (full AMS Hub compatible!) Exhaust Fan Muffler / Fan Silencer without Supports/Bridges!

Bambu Lab X1 Exhaust Fan Muffler / Fan Silencer (Eds Version) My remix of really cool original silencer of OurAngryBadger! THANK YOU for the step files!!! :-) Main changes - really nice (with big bambu lab logo) and easy print version…

Downloads
19,241
Likes
1,519
Rating
4.91
P
PrintablesDET-Man

CORE One Exhaust Fan Cover

There are so many design decisions I really like about the 🥰 CORE One. But when it comes to the exhaust fan grid, it's just on the edge to call it " functional" 😟. So I felt I needed to design a drop-in replacement to fix the things I did…

Downloads
7,257
Likes
191
Rating
5
P
PrintablesB M A

*REALLY WORKS* Centauri Carbon Silencer Quiet DUAL Fan Shroud Muffled Intake Exhaust & Improves Internal Temps

All props to Pattersaurus on Thingiverse for this. * You'll need THREE M3 x 8mm Screws / Bolts (no nuts) to attach this to your machine. * ****PRINT ORIENTATION**** - fins and holes face down on plate: Just as the first photo, place it on…

Downloads
5,896
Likes
908
Rating
4.94
P
PrintablesOurAngryBadger

Bambu X1 Exhaust Muffler / Fan Silencer

Bambu X1C Exhaust Muffler / Fan Silencer Work in process. Updates will be posted below. Features: Make the printer quieter by muffling the noise from the extremely loud rear exhaust fan. Using air baffle design, minimize noise while…

Downloads
4,908
Likes
1,043
Rating
4.71
P
PrintablesEIGA

FormD T1 Exhaust Shroud V2

If you intend to sell prints of this model, then please purchase a Commercial Use license version here . Main Features: - Improves thermals - Reduces fan turbulence by using circular cutouts for the fans - Easier fan mounting or swapping…

Downloads
3,519
Likes
151
Rating
4.8
P
PrintablesLuboš Novák

Air conditioner exhaust into the ventilation window

Air conditioner exhaust into the ventilation window. Výdech klimatizace do okna ventilace. Category: Household

Downloads
2,047
Likes
314
Rating
4.83
P
PrintablesfbeauKmi

Voron 2.4 Exhaust cover

Update 26/11/2024 : 5 new models. Add ECAS + left side bowden input Update 06/10/2024 : Add plain cover Update 08/28/2023 : Stiffer cover and fix issue below for panel < 3mm Yes, this is another backpanel cover for Voron 2.4 ! I designed…

Downloads
2,018
Likes
250
Rating
4.93
P
PrintablesRick Tucker

Window Seal for 4-inch Exhaust Duct

The model uses interlocking boards and a vent. The interlock is an angled dove tail that will provide a very tight seal (more air tight than the typical window seal kit). The interlocks are modeled with no clearance. You will likely need…

Downloads
1,587
Likes
304
Rating
5
P
PrintablesUncle Jessy

Bambu Lab A1 Bin - Death Star Thermal Exhaust Port Version

Help take down the empire with your new A1 3D Printer by flinging poo through the Death Star Thermal Exhaust Port opening! I modeled this in Shapr3D and there is a version without the exhaust port opening as well ;) Print in place, no…

Downloads
1,407
Likes
270
Rating
5
P
PrintablesIndy Wijata

*Updated Wide Model* Detachable Velux Tilt Window Fume/AC/Printer Exhaust | 100mm/4 Inch Duct

Update August 2026 Finally put down the time to improve on this design. I managed to increase the output surface area keeping in mind of the restrictions of my current window. The slot is the same height but now 20 cm wide. Please double…

Downloads
1,389
Likes
534
Rating
4
P
Printablesgrizzie17

60mm Exhaust Fan Silencer Flowmaster (PSU) Ender3/Neptune[2,3]/Others

Exhaust Fan Silencer that was inspired by the Flowmaster muffler design. I know that it looks kind of hokey, but it's hard to argue with the results. The folks at Flowmaster really know what they are doing with muffler design. This Fan…

Downloads
1,323
Likes
211
Rating
4.92
P
PrintablesRezin Creative

Elegoo Saturn 4 Ultra Magnetic Exhaust System

I designed this system firstly for the obvious reason of keeping fumes out, secondly to easily switch the exhaust port for my airbrushing booth or printer, and to put a cover on when not in use (Helps with the air conditioning). I like to…

Downloads
1,296
Likes
180
Rating
5
P
Printablesstugpanzer

Creality K1 Exhaust Fan Filter Holder

This is a simple design to allow one to use Activated Carbon Filter material with the Creality K1 Printer. Just cut some Activated Carbon Filter Material to fit then press-fit on the enclosure exhaust fan. This is the material I used:…

Downloads
1,225
Likes
145
Rating
5
P
PrintablesNadir @ CN3D

Sovol SV08 Exhaust Filter

This is an original design made by Voron we just adapt it to the top hat that we made for the Sovol SV08 https://www.printables.com/model/865851-sovol-sv08-top-hat You need carbon fiber foam filter 5 pieces of 7mm x 65mm x 130mm You can…

Downloads
1,175
Likes
195
Rating
4.83
P
PrintablesCoroleon

Crocs Car/Semi Truck Exhaust

DONT SELL WITHOUT MY CONSENT. Permission can be bought for $10 Hello! First of all, thank you so so much for looking at my design! I would really appreciate if you could leave a like. I got some new crocs and I wanted to create some…

Downloads
1,167
Likes
166
Rating
5
P
Printablespavol.n

Exhaust manifold

Just slice and print. No supports needed.

Downloads
1,135
Likes
63
Rating
5
P
PrintablesThomllama

Dewalt DW 735 Planer Angled Exhaust Port

Simple attachment for the Dewalt 735 to get a 4"/100mm hose up and out of the way of boards exiting the rear of the planer! Simply push in the button on the stock port, rotate and remove the original stock black port. Install this…

Downloads
1,134
Likes
135
Rating
5
P
Printablesppi7ihp

xTool window exhaust (or any other 3" hose application)

Background I recently got a xTool S1 laser machine and was looking for a solution to get rid of the exhaust gases to have the machine run in my flat. Idea I checked the most common resources on the web and found some window exhaust…

Downloads
1,027
Likes
139
Rating
5
P
PrintablesTomasz

Air conditioner exhaust into the ventilation window for 100mm duct

I recommend checking out remixes made by @ Hanak1nSolo and @ fneb Both are great, and could be a better fit for your specific case! You can find them in Remixes tab window outlet size is 40mm x 200mm is has the same area as the input…

Downloads
994
Likes
146
Rating
5
P
PrintablesWolf_Prints

Centauri Carbon Exhaust Filter/Vent (2 in 1)

I remixed the model from Uncle Jessy. I wanted a solution to filter and/or vent the exhaust from the Elegoo Centauri Carbon. The exhaust attachment is compatible with a 4 inch dryer vent hose. Link to the HEPA filters -…

Downloads
969
Likes
155
Rating
5
P

QIDI Q1 Pro Internal Exhaust Duct

A 45mm or so long duct to connect the QIDI Q1 Pro's print chamber 60mm internal fan to the vent at the back to allow hot air to escape without heating up the electronics. The original idea was based on the model below, only as I have my…

Downloads
951
Likes
142
Rating
5
P
PrintablesZac Reinke

Mini Starship with Collapsible Exhaust Flame

I printed a couple of 3DPmom's Rockets for my girls and was truly inspired by them. They were so simple and fun to fidget with! But I wanted something a little more realistic, so I studied her design and built this minimalistic version of…

Downloads
916
Likes
337
Rating
5
P
PrintablesMr TVR

Creality K2 Plus waste poop chute, exhaust outlet vent and waste bin

This set provides a great way to remove waste poop and chamber emissions from your shiny new Creality K2 printer. The set includes the following models: The main single part “Y” piece which connects to the twin exhaust outlets using a…

Downloads
880
Likes
132
Rating
4.83
P
PrintablesSimon

Removable Exhaust Duct for Flashforge Adventurer 5m Pro

An exhaust duct for your Flashforge Adventurer 5m Pro to fit a 100mm / 4" hose. Three parts: Internal duct to prevent the printer from venting into the motherboard cavity. This has holes for 4 off 6mm diameter, 3 thick magnets, but really…

Downloads
875
Likes
167
Rating
4.5
P
PrintablesNyxCode

Voron 2.4 Umbilical Exhaust Cover

Update : Added INVERTED version, in which the CNLINKO LP-12 is mounted upside down. This makes removing it easier, since the previous version didn't leave much space between the clip on the connector and the frame. If you don't mind the…

Downloads
861
Likes
172
Rating
5
P
PrintablesScriding

Universal Exhaust Pipe Plug (No Supports)

I made this exhaust pipe plug to use when I wash my motorcycle. It will fit exhaust tips from 12mm to 38mm inner diameter. It's modeled to print without supports or brims on its side. The small flat section it sits on does not affect its…

Downloads
835
Likes
69
Rating
5
P
PrintablesBazl Tech

1.5" Exhaust Header Fabrication Kit

Each bend block is equivalent to a 22.5deg pc.. So 4 pcs will give you a perfect 90deg bend. They also have angle location marks/notches every 30 deg to help keep track of your compound bends, and make it easy to re assemble and mark once…

Downloads
780
Likes
74
Rating
0
P
PrintablesMarcel_Be

Elegoo Saturn 4 (ultra) exhaust adapter

An adapter to connect a hose to the printer to vent harmful fumes. There is space for a fan, which can be powered via the printer’s USB port. Four holes are provided for using M3 heat-set inserts to securely attach the adapter. The…

Downloads
771
Likes
79
Rating
5
P
Printablesphilltran

Bambu Lab X1/C Exhaust Duct Adapter

Exhaust Duct Adapter that attaches to Bambu Lab X1/C 3D printer to secure four inch exhaust duct. There are holes that line up with the mystery holes in the back panel of the Bambu Lab X1/C printer. The holes on the printer are not…

Downloads
758
Likes
105
Rating
4.75
P

Bambu Lab Exhaust Fan Muffler V3

I liked the previous version, but most people dont have oddly sized magnets on hand. I created this one that uses two stacked 6x3mm magnets. Thats 6mm round and 3mm tall, stacked on top of each other. The hole id 6.5mm round and 6mm deep,…

Downloads
716
Likes
99
Rating
4.73
P
PrintablesCachai

6 inch to 4 inch exhaust hose reducer

I created a DIY airbrush spary booth using two Ikea Samla boxes and a bathroom fan as the exhaust. However, the output of the fan is to a 6 inch hose which did not fit my needs. Therefore I needed a way to reduce the connection size from…

Downloads
716
Likes
47
Rating
5
P
PrintablesCoroleon

Crocs Muscle Car Motor and Exhaust

"Start yooooour engines: chuga chuga ChUgA POP VROOOOOOOOOOOOOOOOOOOM!" Hehe ;) oKAY sorry for getting distracted there XD. Thank you so much for looking at this. YOU ARE AWSOME! This bad boy is sicK with a capital K. I was going for the…

Downloads
699
Likes
101
Rating
4.5
P
PrintablesNathan Nguyen

Elegoo Centauri Carbon Ventilation Exhaust Kit

This is an exhaust kit I designed for the Elegoo Centauri Carbon to exhaust any fumes out when printing parts like ASA, ABS, etc. Included is the following Printer to 4" Duct Adapter Printer Auxillary Exhaust Cover 4" Duct to Fan Adapter…

Downloads
679
Likes
117
Rating
5
P
Printableswbphelps

Yet another Bambu X1 exhaust fan muffler

I was intrigued by the various exhaust fan mufflers for the Bambu X1, and since I had just acquired Fusion 360, decided to create my own version as a way to get up to speed with F360. I wasn't really expecting to make a quieter version,…

Downloads
678
Likes
148
Rating
4.7
P
PrintablesPetclaud

Lack Enclosure 80mm Fan exhaust/vent and fan cover

Using Merkelerk's nice fan cover design ( https://www.thingiverse.com/thing:2755547 ), I made this exhaust pipe and modified the fan cover to mount a 80mm fan for an Ikea Lack enclosure. The exhaust is 0,5 mm higher than the thickness of…

Downloads
674
Likes
72
Rating
5
P
PrintablesReelClones

Creality K1 Max exhaust vent 4"

I needed a 4" extraction port for my K1 Max for printing in ABS, but the only one I could find required the use of TPU filament (which I don't have) as it needs to flex in order to fit. I remixed it to attach with some magnets I already…

Downloads
670
Likes
100
Rating
4
P
PrintablesIgor R.

Qidi Q1 Pro 100mm Exhaust System

I created this exhaust system for my own printer/window setup, but sharing it here if anyone needs something similar. Minimal supports required, all the STLs should be in the correct printing orientation and do not require supports,…

Downloads
640
Likes
100
Rating
5
P
PrintablesVelaptic

QIDI Q1 Pro Exhaust Duct and Fume Extraction Port With 90 Degree 3" Swivel Elbow

A print that improves heat management and ventilation on QIDI's Q1 Pro printer. An internal duct guides chamber exhaust out of the machine's back panel. Adding this duct has three benefits: * Your printer's power supply and main control…

Downloads
614
Likes
101
Rating
5
P
PrintablesYeeve

120mm Computer Fan- 4in Duct Exhaust

Simple adapter to fan I modeled to fit 4 inch duct. End piece was modeled to fit and vent under a window. End piece can be skipped depending on your purpose.

Downloads
613
Likes
83
Rating
5
P
PrintablesMARC PRUDHOMME

Qidi Q1 Pro Exhaust Port Cover

Simple and quick exhaust port cover for the Qidi Q1 Pro. Use to mitigate heat loss and fumes exiting the printer. Works with existing screws, no additional hardware needed. Note: The back of the printer has large gaps exposing the…

Downloads
611
Likes
82
Rating
5
P
PrintablesCC3D Projects

Bambu X1 Exhaust Muffler or Fan Silencer - Magnetic

Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…

Downloads
604
Likes
115
Rating
5
P
PrintablesLoogle

Voron 2.4 Umbilical Exhaust Grill for PUG

Description: Use the excellent Parametric Umbilical Gland (PUG) , instead of a PG7 or similar, to secure your Voron umbilical through the exhaust grill. It also provides a location for the reverse bowden tube. You can use the Parametric…

Downloads
604
Likes
91
Rating
5
P
Printables365lyf

NZXT H1 Triple & Dual 40mm Exhaust Fans Shrouds

As printed by hundreds of H1 owners on Reddit, I present the: Triple & Dual 40mm Exhaust Fan Shrouds for NZXT H1 Case - Version 4.0 Benefits: Typically a 6 degree Celsius drop on RTX series GPUS with three fan version Additional 2-6…

Downloads
602
Likes
51
Rating
4
P
PrintablesBC Designs

BentoBox 2x5015 bottom exhaust

Update 24/12/2022: Bottom exhaust uploaded was incorrect and didn't include the bottom L shape cut-out. This has been corrected in the latest version (v2). Description / Changes A modified version of RISCie's BentoBox 5015x2 Fan blower…

Downloads
601
Likes
159
Rating
5
P
PrintablesFilamentos

Window Exhaust Hose Adapter, AC 150 mm

This window exhaust hose adapter is for a 150 mm PP hose (150mm PVC should be good), and I tried it with PETG and a 0.6 mm nozzle. The extra adapter bits are supposed to be a little loose, so you'll need some glue. You can switch the…

Downloads
587
Likes
60
Rating
5
P
PrintablesCybuster

3in air duct basement window exhaust

Print with any material you would like. No support required. Please see image as reference for suggested orientation for printing.

Downloads
586
Likes
89
Rating
5
P
PrintablesDave D

K1C Exhaust Duct Fittings

END FITTINGS This set of models includes 5 part files for various scenarios of venting your Creality K1/K1C exhaust outside. It's especially good for when printing fumey filaments like ASA or ABS where that half-filled OEM carbon “filter”…

Downloads
576
Likes
51
Rating
1
P
PrintablesKen226

Voron 2.4 Exhaust Housing, Side Tube Entry.

I kept having issues with the amount of force needed to move the filament through the PTFE tube. The only way to get it to feed freely was to keep the tube's loop, behind the printer, overly large. This version of the exhaust housing lets…

Downloads
574
Likes
90
Rating
4.4
P
Printablescornflake

Under-door Exhaust Duct

I run a couple of FDM and SLA printers in a closet in my house. I wanted a way to exhaust toxic/smelly fumes out of this enclosed space without having to permanently modify walls or doors. This allows me to vent fumes out of a nearby…

Downloads
570
Likes
46
Rating
0
P
PrintablesSilvan Pierce

Dirtbike / quad Exhaust Plug

This is a exhaust plug for a dirt bike or quad, designed so no supports are needed. this should work for both 2 strokes and 4 strokes, but if you are worried just scale it up or down to your liking. 10% gyroid infill seems to give it a…

Downloads
554
Likes
66
Rating
5
P
PrintablesRobert G

Bambu Lab H2 Series 4-Inch Exhaust Duct Adapter (H2D / H2S / H2C)

Bambu Lab H2 Series 4-Inch Exhaust Duct Adapter (H2D / H2S / H2C) This model is a custom exhaust adapter designed specifically for the Bambu Lab H2 series (H2D, H2S, and H2C). It allows you to connect the printer’s exhaust port directly…

Downloads
548
Likes
62
Rating
5
P
PrintablesMichal

Voron 2.4 Exhaust cover with Umbilical (PG7)

Back cover for Voron with support for PG7

Downloads
547
Likes
59
Rating
0
P
Printablescolossatr0n

5.9 Inch Air Conditioner Exhaust Hose Wall Adapter

This is a wall mount collar that fits a 5.9 inch exhaust hose for a portable air conditioning unit. The base was designed to cover a 6.38 in (162 mm) diameter hole drilled in drywall. Most can-light hole saws are about this size. The…

Downloads
546
Likes
45
Rating
5
P
PrintablesMobious

Exhaust Fan Housing for Lack Enclosure (120mm + Speed Control)

After completing my Lack Enclosure, the next step was to add an exhaust system, but the last thing I wanted to do was cut a big hole in my acrylic side panels. My solution? Cut a hole in the table surface instead! No hole saw or CNC…

Downloads
539
Likes
212
Rating
5

Voron V2 Exhaust Fan Grill with Bowden/PG7/Thermistor

A remix of my solid plate , for those who want to keep the rear exhaust housing in place. STEP file provided if you want to make any changes.

Downloads
537
Likes
65
Rating
4.33
P
PrintablesRazerOfPain

Creality K1 Exhaust Fan Carbon Filter Adapter

Designed to address the issue of ABS fume during 3D printing. ABS is a commonly used filament in 3D printing but can produce strong and potentially harmful fumes when heated. To ensure a safer and healthier printing environment, the…

Downloads
535
Likes
42
Rating
4
P
PrintablesFunFunBoy

Exhaust grill cover for Voron 2.4

I've replaced the stock Voron exhaust fan with the Nevermore micro so this is a cover plate.

Downloads
535
Likes
36
Rating
5
P
PrintablesCrosslink

K1 Exhaust Fan Adapter for LV-H128-RF Filter Adapter

Print with 3 perimeters for stability Use 4x M3 Threaded inserts, outer diameter 5mm, length 4mm: https://s.click.aliexpress.com/e/_DmG9Lyz

Downloads
534
Likes
27
Rating
4.67
P
Printables3DRA

Creality K1 MAX exhaust with clip mount

Exhaust for Creality K1 MAX with clip mounts. For pipe with a diameter of 90 mm and 100 mm. I printed with PLA, with outer and inner brim and without support.

Downloads
530
Likes
51
Rating
5
P
Printablesmrgnarvar

Centauri Carbon Filter and Exhaust Vent Combo

Update: Made a version with a swept pipe and lip. Created a mounting bracket for the CC filters that has a 90 degree bend for connecting a 4" dryer hose for ventilation. I modified the case to load from the top, making it easier to access…

Downloads
525
Likes
65
Rating
0
P
PrintablesKOMMIRA

QiDi Q2 - 4 Inch Exhaust Duct

4-Inch Exhaust Duct for Qidi Q2 – Improved, Optimized, and Easy to Install Upgrade your Qidi Q2 airflow setup with this redesigned 4-inch exhaust duct , engineered to offer smoother airflow and easier hose connections compared to the…

Downloads
522
Likes
65
Rating
5
P
PrintablesWissencat

Voron V2.4 Canbus Exhaust Filter Mod with Step File

Voron V2.4 Canbus Exhaust Filter Mod for M12x1,5 cable glands.

Downloads
507
Likes
63
Rating
5
P
PrintablesSKT

Window Exhaust Vent | Fume Extractor | Air Intake | AC air conditioner Ventilation | Roto WDC i8

I designed this, in order to extract fumes from soldering and 3D printing directly out of the closest window. For this I use the AC Infinity Cloudline A4 duct fan. The model consists of three parts that can simply be stuck together. The…

Downloads
505
Likes
132
Rating
0

Centauri Carbon Fan Intake/Exhaust & Noise Suppression Flange Plate

This is a generic flange plate. It may be used with other systems to extract fumes or to bring in cooler air for PLA/TPU, etc. One side effect of having this installed is that it does quiet the especially loud aux fan to an extent. It's…

Downloads
492
Likes
113
Rating
0
P
Printablesbom

Elegoo Centaur Carbon exhaust

Quick adapter to attach to the back of the carbon to extract the fume from the printer while printing ABS or ASA.

Downloads
488
Likes
72
Rating
0
P
PrintablesKraemer

EcoFlow WAVE 2 Portable Air Conditioner with Heater Exhaust duct connectors

Fits EcoFlow WAVE 2 Portable Air Conditioner with Heater exhaust ducts E and D. It is hard to cut a perfect circle, so print these, screw and/or glue it to the board for a perfect fit. Cut the board to the size of your window and put some…

Downloads
487
Likes
30
Rating
5
P
PrintablesMakers Workshop

P51 Mustang Exhaust Stacks for CARF Models P51

A set of left and right exhaust stacks for the CARF Models P51 Mustang. The shown examples were FDM 3D printed and textured by stippling acrylic paste with a stiff brush, painted and treated with a technical paint by Citadel called Typhus…

Downloads
486
Likes
19
Rating
0
P
PrintablesNadir @ CN3D

Sovol SV08 TOP HAT Side Exhaust

WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show. We had an request to make a version with a side exhaust for our top hat Thanks to the awesome community for the suggestions, like always we are…

Downloads
479
Likes
84
Rating
5
P
PrintablesLevi

Creality K1C Exhaust Fan Duct Parametric

This parametric exhaust fan duct is designed for the Creality K1C to efficiently direct the printer's exhaust outside using a ventilation hose . The design is customizable , allowing users to adjust the diameter of the duct opening to…

Downloads
477
Likes
60
Rating
5
P
PrintablesNDMstr

AOOSTAR R1/R7 120mm Exhaust Fan Shroud

The AOOSTAR R1 and R7 are great budget NAS enclosures for backing up important files, but they have one significant airflow related issue, the stock top plate prevents smooth exhaust airflow out from the top of the unit and it stagnates…

Downloads
476
Likes
18
Rating
5
P
PrintablesCourtland

K2 Plus Exhaust, Dual, Single 4" & 2.5" Options

Here are a few options for exhaust/ducting for your K2 Plus. All-in-one → This is a single large piece which takes the output from both exhausts and takes it down to a single point. Attach your hose/duct and then attach the hose to a…

Downloads
464
Likes
50
Rating
0
P
PrintablesD00M

Y-Splitter Exhaust Duct Valve 125mm

Exhaust duct for my resin and cnc enclosure. Needed a solution to split in-line 125mm fan to both so I came up this this. Each inlet has a check valve with a lever. OD: 129mm ID:123mm Parts Needed: 8mm rod Installation Instructions: Print…

Downloads
454
Likes
70
Rating
5
P
Printableskoen

Creality K1C Exhaust Slim Fan Duct

The original model required quite a bit of room behind the printer to connect a ventilation hose. In this model I've added a 90º angle, to direct the air up, which now only requires about 6cm (~2 inches) of space behind the machine,…

Downloads
448
Likes
76
Rating
5
P
Printablesbcpratt

6in to 3in Duct Reducer for AC Infinity Cloudline S6 - xTool D1Pro Enclosure Exhaust

Credit to @Jonathanlin for including the f3d file that made this an easy first remix! I did slightly reduce the diameter on the side that connects to the Cloudline S6, the fit is very tight so make sure your printer is well calibrated. I…

Downloads
447
Likes
32
Rating
0
P
PrintablesKen226

Voron 2.4 Exhaust Fan Wire Cover

This replaces the rear, lower panel clip. It covers the exhaust fan wire, and any filament runout sensor wires, etc. You will need 2 m3 heat set inserts, two M3 T-slot nuts, 2 M3x8 socket head cap screws and two m3x6 button head cap…

Downloads
447
Likes
77
Rating
4.67
P
PrintablesBazl Tech

1.750" Exhaust Header Fabrication kit

The blocks incorporate a 79.4mm Center line radius (3.126" CRL) Alignment notches are every 22.5deg as well. Basic parts included: 1" long straight 1" long straight with dead-end 10 deg - 79.4mm CRL 15 deg - 79.4mm CRL 22.5 deg - 79.4mm…

Downloads
443
Likes
78
Rating
5

Voron Exhaust Hose Adapter

Adapter parts to fit a quick-connect 63mm id (2.5") extraction hose to the standard Voron 2.4/Trident exhaust box and fan. I use these parts in conjunction with a window seal for the exhaust vent of portable A/C units. This allows me to…

Downloads
442
Likes
114
Rating
5
P
PrintablesJoshua Paterson

AC Exhaust Adapter (For Windows)

Should fit any AC hose. I think it's 6 inches. I made this a while ago

Downloads
440
Likes
43
Rating
5
P
Printablesant

X1C 4"/100mm Straight Exhaust Vent (AMS-hub compatible)

I recently upgraded to the AMS-hub for my Bambu Lab X1C and didn't see any exhaust vent mods that fit it so I decided to remix one and make a few changes. This exhaust vent is designed to fit a 4"/100mm ID ducting hose. There is a slight…

Downloads
440
Likes
63
Rating
5
P
Printableschal

Voron 2.4 exhaust cover CAN PG7 M10 bowden remix with logo

Upgraded to can toolhead and liked this cover. Had to remix it for the PG7. Print the backplate and the logo (accent color). The logo parts should pushfit the slots in the backplate. Print the grill from here:…

Downloads
440
Likes
65
Rating
5
P
Printablesdzxxx2331s

Directional 120mm fan exhaust

To vent exhaust air in a specific direction if you have your desktop up on a table like me. Reduced noise by ~3db (roughly, measured on smartphone at where my head usually is) idle and ~6db under load. Also heat isn't dumped near my face…

Downloads
437
Likes
79
Rating
5
P
PrintablesOndrashek

xTool M1 Ultra Window Exhaust Adapter

In the EU, we can open windows for ventilation. This allows you to use the xTool machine with an exhaust system directly through a window. 11.3.2025 - Added version for 100mm hose No supports are required 0.2 mm layer height, 15% infill

Downloads
436
Likes
59
Rating
4.67