Small Whistle: extremely loud
Small whistle for keychain, backpacks and other daily or safety equipment.
- Downloads
- 15,523
- Likes
- 2,803
- Rating
- 4.91
25,471 models
Small whistle for keychain, backpacks and other daily or safety equipment.
July 27 2022 house keeping note: Somehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well. To…
Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
Extension cord holder, easy to print! Mounted using screws D=3mm. Customizable using the STEP file. :)
Extruded fractal flake prototype. A predecessor to the fractal flake vase I made some years ago. The basic shape and parametric model is almost the same: A variation of the Koch-curve with hexagons, which changes in rotation and…
Extruder movements on both MK2/S and MK3 can be quite difficult to see. The other three axes are easily visible, and honestly, it can be super mesmerizing to watch. A lot of us always want to know what’s our printer doing. Peter…
(for Bambu, check below) Please like, share, download and all the amazing good stuff! Since this is my final model in my "Single Extruder - Dual Color" series where I managed to put 3 colors together into one model! Not counting the…
I always like to see what is going on with my printers. Sometimes I wonder what movement the extruder motor is making (extruding, retracting, slow, fast, etc.), which is not always so visible on the Prusa MK2 / MK2.5 / MK3. Hence I have…
Finger extension brace (splint) Suitable for treatment of injured extensor in the fingertip (i.e. “mallet finger”). Total fixation period of 6 weeks. Also suitable for fractures of the fingertip, which lead to the same symptom - finger…
The original size was a little small for hand holding, so the overall length was extended. Please be careful not to injury. -Update- I have made an update to add a small edge to the shape to allow for better finger hooking. There is no…
Yes I know, it's tempting to use a discarded PC fan as a solder fume extractor, but it usually doesn't do the job quite well. That is why I opted for an industrial fan with impressive specs. The Noctua NF-F12 industrial PPC-3000 PWM has…
Test the maximum printing speed of your extrusion system! The model can be scaled in X and Y to fit your buildplate. There is a small notch every 2 mm to indicate a speed change. GUIDE Load, orient and scale the part to your liking Enable…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
This handy little piece turns a regular M3 nut into a T-nut that fits into a 2020 / 2040 extrusion ( e.g. Ender 3 frame ) in order to attach anything. Some pictures show an original Ender 3 M4 T-nut for comparison. Prints best with no…
Also see our Latest Project Launching on Kickstarter 30th April 2023 https://www.kickstarter.com/projects/fizzychickens/3d-printable-antikythera-mechanism Remix of Three Ducks in a Bear Suit Pen Plotter Requires 2 x M3 Bolts (To hold Pen…
Project A compact case for the SanDisk Extreme Portable SSD (SDSSDE61) that holds the SSD, USB-C cable, and USB-A adapter. Cable and adapter fit comfortably in the case while the SSD has a snug fit and will not slide out accidentally. The…
[DESCRIPTION] This model is a battery adapter : from battery parkside x20 team sold by Lidl to any Makita tool using 18v battery. It is an remake from Myle's work (see : thingiverse.com/thing:3110392 ). Thickness differs from original…
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…
UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…
Because changing nozzles with the supplied multi-tool was too wobbly for me, I developed a simple tool to hold the hotend more stable. As can be seen in the CAD image in cross-section, the tool is designed in such a way that the hotend…
What colors will you choose? Ever since I designed the dual color cow I really wanted to make a poison dart / tree frog version, but none of the available 3D models were suited for this operation. In the end I decided to try and model my…
Imprints clay with a beautiful abstract flower texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm…
Update 04.01.2022 This design was highly popular ever since I made it on a long winter night. Despite the fact that it required manual thread cutting to get it's M4 inner thread, users of the Prusa Mini liked it a lot. That was reason…
Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…
My printers sit on an ikea Kallax shelf which causes the LCD panel to hang over. Since the new MK4 has an awesome LED Status Bar, I did not want to lose out on the feature. Model printed without supports and misses LED and any chips on…
Table mount/extender/clamp Designed to expand your workplace. It can also be used as a hook. You can be sure of reliability, as one such mount can easily withstand 22 lbs or 10 kg 🏋 Printing settings ⚙ Material: PETG / ABS / ASA Layer…
Because I couldn’t find a pill organizer with a clean and appealing design, I created this compact weekly pill organizer that allows you to easily pour out your medication. Each drawer snaps into place using integrated magnets , giving a…
This SVG file goes with mcpea's 3D model of the printer made for PrusaSlicer, which although excellent was missing a proper build plate texture. More exactly, this file replaces the black build plate texture with the big white FLSUN logo…
For my new Eurotronic Spirit smart radiator valves I needed a clean and easy adapter. There are many adapters out there that are quite bulky, couldn't figure out why that would be necessary... So designed my own in a few minutes. My…
I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…
A roller beach toy for making textures and paths in the sand for that finishing touch on your sandcastle or just for fun. This model includes 6 different interchangeable rollers including Pebble texture roller Train track path roller Road…
Background I don't know if this happens to you, but maybe? You work in a profession or an industry, and everyone in your family and your circle of friends believes that you now know every detail that could be nearly related to it. "Hey!…
This is a remix of Print-in-Place Fidget Toggle Switch, but with "Click!" text, because I didn't want it to be blank.
Imprints clay with a dainty floral texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the…
Imprints clay with a beautiful Monstera leaf and Hibiscus flower texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed.…
A stamp wheel from the Fossil Skeleton #9 These digital 3D printable models are meant to create textures in clay, polymer clay, or EVA foam, and other materials. We want to make more models like this. If you want to let us know what kind…
The video on YouTube says it all: https://youtu.be/uFuYvUkHlpI About the Cap expander (short video): https://www.instagram.com/p/CD083fJD9TJ/ Easy printable even on hobby 3D printer, simple to mount, universal for almost every bike basket…
To add the filament profile to Bambu Studio, follow these steps: 1. Download the .zip archive - the .gcode file is empty and can be ignored 2. Extract .json file from zip archive 3. Open Bambu Studio 4. Go to File →import→import…
This was a lot of fun to remix I learned how to use several things I had never used before in Blender and I have already been asked print several of these. UPDATE 11-17-2019: Layed the models flat on the build plate for better adhesion.…
EXTREMLY LOUD WHISTLE Should you encounter issues with filament strings, this whistle may prove ineffective, as it involves numerous retractions. I suggest verifying your slicer configurations. You might consider reducing the printing…
This is a little extruder indicator in the shape of a modern wind turbine. I was inspired by the Dutch-style windmill extruder indicators in Prusa's video here: To attach to your motor, you will need either two 8 x 3 mm disk magnets or a…
If you plan to stack IKEA tables, use these leg extensions to secure the tables on place and have a bit more space for operating the printer. Works perfectly with my IKEA table spool holder ;)
I had many issues/errors/problems with my mk3s+ mmu2s while printing multi color. I can tighten idler screew to not have stopped filament, but than I had issues to work IR sensor right. I loose scree, IR sesor was working right, but…
Imprints clay with a lovely heart texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20%…
Imprints clay with a beautiful leaf texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20%…
This was designed to be used with a cylindrical magnet (8mm diameter by 10mm long) This is a press fit, no glue is required... Print instructions 200 microns works fine !
Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included…
In the images, there are great results with tri-color filament and putting gold layers as the two layers on the outside section. The layers are explained in the table below. Reference the picture for the 180 twist for the middle layer. It…
Watch the motion of your 3D printer's extruder, Star Wars style. Embed a 6mm X 2mm tall magnet while printing, multi-colored as well with a single extruder (swap mid-print). Print instructions I used .1mm layers, since I wanted this to be…
Don't print all files look at what you need. Covers up the v-slot rails on the bottom so that nothing can fall into it. Easy to remove and install designed with loose tolerances. Settings: Prusaslicer with anycubic profiles 0.2mm layer…
To edit the text in PrusaSlicer (you must be in Expert Mode ): Switch to 3D editor view Right click on the text to be changed. Select “Edit text”. Edit the text. Slice! For multi-color, add tool changes or filament changes at the desired…
This design is now outdated, V3 can be found here https://www.prusaprinters.org/prints/66215-tzb-mk3smk25smmu2s-extruder-mmu2s-no-tower-v3 This is for use with PRUSA i3 MK3S, MK3S:MMU2S & MK2.5S printers. Designed to be used with…
Full set of couplers to add an additional lack table to the original lack enclosure. Print instructions Printer Brand: Prusa Printer: I3 MK3S Infill: 15% Filament: Prusa PETG
Ergonomic Solder Paste or Flux syrynge extrudes dispenser extruder Simple but effective and comfortable to use, large surface area touching the plam of your hand Easy to print Print instructions print oriented with flat surface to bed (…
Prusa i3 MK3 X-axis-cable holder R4 extruder Print instructions PRUSA PETG 20% infill, 2 perimeters
I designed this feet / legclips for the IKEA kitchen METOD and its plinth FÖRBÄTTRA to: be more stable with PLA and PET be printable as one or multiple parts (to glue together) have multiple length to avoid “Aufdoppeln” and fit my needs…
Imprints clay with a lovely splash texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to make the…
Just simple Happy Birthday text: 1.5"x1"x~7-8"
Extended baseplate for Makita Router, it give you more stability. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this later. Print instructions PLA Infill 25% Look…
Imprints clay with a beautiful ripple texture of concentric circles. 20cm wide - 2 sizes of pattern Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in…
This is a single extruder variant of my second articulating dragon design, the dual colour version is also pictured above. It includes a few improvements over My original dragon ( Rupee the Articulated Dragon ) including improved…
Imprints clay with a geometrical hexagon (honeycomb) texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a…
This print require to modify some slicer parameters, G-code for Prusa MK4 and MK3S+ is provided, if you need to slice this model for your printer please, follow the instructions step by step. More model variations and 70mm size coming…
I liked the idea behind this design , but it was too flimsy, even printed on PETG it kept breaking when dropped on the floor. This is designed for the Black Diamond “HotForge” carabiner from their quick-draws, but should fit any of the…
The first Prusa MK3's were shipped with Noctua fans with hideous colors. Hence I made a cover for the Noctua fan as found here: https://www.thingiverse.com/thing:2730049 When Prusa released the new MK3S parts, some modifications to the…
Flipped Buhler's print in the X axis so the final product has the nice texture of the print bed facing the viewer rather than the topmost layer of the print (which always has nozzle scratches). Also scaled to 125% then rotated to still…
Created for Prusa MINI with mini base to clip X-Axis cable out of the way of the filament tube.
A weather tight (not waterproof or dust tight) box for extension cord ends. Has basic locking tabs to keep the cover attached. Fits a medium duty US extension coord but can be scaled up if it needs to fit a larger plug. Due to its outside…
Ho Ho Ho! 🎄 Imagine a Christmas tree made of not just two but three parts , each twisting into the other to create a double vortex illusion – yes, it’s twice the magic! The twisting motion makes this tree look absolutely mesmerizing and…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Inspired by the Nextruder gearbox, I created this visualizer. The extruder indicator looks very similar to a cycloid gearbox, although it is actually only a half one. Google it, it's an interesting concept! The middle part rotates…
Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. What is this for? This serves to limit the tightening force on the nozzle when it's being changed. However, please so use it with…
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Ho Ho Ho! 🎄 Imagine a Christmas tree made of two parts that twist into each other – yep, you twist it into place. This creates an impressive vortex illusion , making the tree look almost magical. Caution: The illusion is so captivating,…
Easy model to secure cable width a ziptie or a strap to extrusion profiles. Just rotate 90° the part into the profile and you are ready to fix the cables.
Imprints clay with a lovely splash texture. 100mm wide, 16mm diameter Best printed upright, no support needed. A support base is included in the file, so the roller won't fall over during printing. Printed with a 0.4mm nozzle, 20% infill…
Accessories for the TowerGarden – towergarden(dot)com Instead of the two upper floors of herbs, you now have 8 more normal places at half height. Requires 12xM4 12mm screws and matching nuts Only chemically inert and food-safe materials…
This is a PrusaSlicer project with the settings from CNC Kitchen. The Volumetric Flow starts at 7 mm³/s and goes up to 25 mm³/s in 1,5 mm³/s increments. Default settings are for the Prusa MK4. step by step to individually adjust the…
Update: Improved volume and fit, as well as a version for the left hand. (Example printed in white PLA+ from eSUN). Background: Created for my partner who has quite big palms - he said when playing for longer it is straining to hold the…
Extrusion indicator in the shape of the Open Hardware symbol. Requires two 8x3mm magnets and some superglue. Print instructions No supports. One color change. After it's printed, please scrape the recess so that the magnets will sit flat.…
Use OpenSCAD to edit these files to create your own custom text to make fridge magnets. Follow the directions in the OpenSCAD editor to make your own custom text. To make fridge magnets attach a magnet to the back of the print - flat stip…
Might be a while before Bitcoin goes back up luckily you can print this sick coaster in an hour to hold your drink while you wait. Also perfect for a bull market celebration! Layer heights for color changes are not divided evenly for a…
For more 2020 hinges as well as other assorted designs A pivot/hinge for 2020 aluminum extrusion. The hinge is made up of three printed parts, none of which should need any supports, brims, etc. I printed mine from PETG on a 0.6mm nozzle…
Imprints clay with a geometrical checkerboard texture. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm nozzle, 20% infill in PLA. The outside can be sanded to…
There are many extruder movement indicators, and I was looking for something simple, so here is my own take. This is a collection of a number of indicators, printed in two colors (black and orange Prusament PETG in my case, to complement…
I got inspired by the “https://www.prusaprinters.org/prints/63672-ps5-controller-clip” and made a similar holder for the external harddrive. I printed mine with a 0.6 nozzle at 0.4 layer height.
Hello, Welcome to my profile, full of models and miniatures :-) I have an Extendable, retractable, collapsing long sword for you. The individual parts fit together perfectly and it is very well thought out and so you can even play with…
Literally just took the original Prusa Mini gcode file and in text editor changed the M92 line to M92 E415 in order to print well with a BondTech Extruder. Thanks to JamesHZ (https://www.printables.com/social/116023-jamehz/about) for…
Size: 82mm x 52mm x 41mm Filaments: PLA Blend Viva La Bronze (gold), PLA Vanila White (white) and Silk PLA+ Rainbow 02 (shiny) Note: All parts need to be glued.
🚀 Snapmaker U1 Minimalist Fast Print Spool Holder 🚀 Need to use a third-party spool with an oversized center hole on your Snapmaker U1 but don't want to wait hours to finish printing? This design is for you! The focus here was on speed…
Easy to print medals to celebrate first, second and third place. Possible to do color change to emphasize the numbers on the medals. I used Oh my Gold, Galaxy Silver and Viva la Bronze (all PLA) for the different medals on 0,2mm Quality…
Yet another design of extruder indicator for Prusa printers. Pro tip: if the part stops rotating with the extruder glue a small piece of paper on the magnet (e.g. use a paper circle from puncher and a glue stick) to ensure friction…
---------------------------------------------------------------------------------------- CHECK OUT THE NEW & BETTER VERSION IN THE REMIXES! NEUE & VERBESSERTE VERSION IN DEN REMIXES ONLINE!…
I was having a lot of trouble printing with flexible materials like Ninja Flex on my XL so I decided to modify the existing parts to try and eliminate the filament jams. Initially i started with reducing the friction from the filament…
This is my original design. It is similar to a circle template. The circles match the outside diameter of copper pipe made to imperial standard gage. This was a tool of necessity. I needed a quick way to check every section of installed…
Do you need a way to easily get perfume out of its original bottle? Than this simple print is for you. It's a simple adaptor for a perfume bottle that uses the vacuum created by a syringe to extract perfume. I have a nice travel bottle…
As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…
This is a custom universal body/back scratcher designed for "Prusa Flash Contest". Infino Scratch is a multi purpose back and body scratcher (with easy click and release). innovative click and release design for easy extendability to any…