147 models
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
A great deal of care must go into a design before there’s nothing left to optimize. I think we can all agree that Zack Friedman’s Gridfinity system has become a benchmark for organizational systems across sharing platforms. However, every…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
My hand cranked turbine blower is cool and works fine - however you have to crank it really fast for a nice blow. So i tried to add another planetary gearbox - and it works so much better (and unfortunately louder). All parts are 3d…
NEW The new remix prints as one piece, not two, with no supports needed, and this eliminates an intermediate step of gluing two parts together. Kudos and thanks to WingWong (@WingWong_521453) for the idea. I'd have just used his remix,…
A simple and easy to print toothpaste squeezer that makes sure you get all the toothpaste out of the tube without wasting any. No Supports! Just a few grams! _______________________________ I added an f3d file for anyone out there who…
This is a remix of the tea bag dispenser by gkmakeit. The dispensers can interlock together and stack together. It is also faster to print and uses less material (if bottom is printed semi-solid). Printed in PLA at 0.2mm layer height with…
I loved the Totoro coat rack design from wanhaofan1 (remixed from Yuyuy75's work, both originals on Thingiverse), but I was unhappy with the print time and filament requirements. Using wanhaofan1's STEP file, I thinned out the character…
NOTE: The photos for this model do not reflect the actual printed STLs provided but are there to show how this shelf functions. There is a photo of 2 examples using the solid shelf + the “even faster” steps provided below using the…
I liked the idea of the original but because of all the small holes it takes forever to print. This version uses horizontal slots in the sides and also an interlaced bottom, making it print in about half the time of the original. I also…
The Polymaker Reusable Master Spool is great, but having the holes modeled into the part means the slicer has to create a lot of perimeters (which makes for slow printing). The slicer is optimized for creating sparse infill patterns that…
Better, Faster, Cheaper. Pick any two. Or actually, write whatever words you want on the front. Represented as a physical card that you can toggle the toggles, and one will always be off. If you can, print the “Short Switch” and “Top…
This is an optimized version of “Lucy” (Australopithecus). This skull has been optimized to print in around ½ the time without any loss of quality (the original scan of the skull has many voids which drastically slows down printing time.…
NEW Makes it so part prints as one piece instead of two, no supports needed, and this eliminates a step of gluing two pieces together with CA glue. I'd have simply used the remix of my design by WingWong (@WingWong_521453) but his caused…
This spool holds the same meters of filament as the original, but the printing time is shorter. I use this model mainly for storing TPU and HIPS filament in vacuum bags. In the original model, the inside of the spool cracked in the vacuum…
Can print without supports, standing up on end.
Thanks to Tony F and michel jubault for the Inspiration and the basedata. Installation Quickguide: 1. Print 4 Sidebar (with or without Vents how you like) 2. Print the same amount of Vent Slides 3. Print 3x Corner Spacer 4. Print 4x…
Personally, I didn't find 3D_Workspace's version with square walls aesthetically pleasing, so I rebuilt the whole thing from scratch in Illustrator, then export it to Tinkercad. I only kept the threads, those worked really fine. You can…
Summary: Filament storage that allows for quick visual check for what I'm looking for is helpful. I don't want to spend time looking for something that I know I have. So open shelves are nice for spools once opened. The brackets were…
After many comments that the words “Better”, “Faster” and “Cheaper” should be modelled rather than written on. I threw this together quickly.
Redesing of https://www.printables.com/de/model/528366-ams-sunlu-250g-spool-adapter without hexagonal pattern to print faster. Instructions bolt and nut → see original modell
CLICKBase was the best Gridfinity base… till now. DON'T PRINT WITH PLA, USE PETG! or any filament with less creep. Use ARACHNE! This model makes use of thin walls for support structure and is optimized for a 0.4 nozzle. ( CLASSIC should…
Quite fast to print, took me ~13 mins with the MK3S. Printed with PETG & PLA for comparison, works well in both variants.
I liked Blizzards' spool, but the hex pattern made it take almost 4 hours to print. I kept the spool centre, and the angled holes on the rim for filament. Only 4 spokes and works just fine. Prints in about 2.5 hours on the X1C.
3D printable callipers for quick on the go measurements that don't require ultra high precision. Print with a 0.2mm nozzle. I used PETG for its strength, but other materials would work too. Print the depth gauge separately, and use a…
Kudos to PointNemo for the original design - I love these little bottles! (Vielen Dank! Ich liebe diese kleinen Fläschchen!) A lot of folks are guilty of this, so I don't want to disrespect the original designer, but there is just no need…
I remixed this model https://www.printables.com/model/586356-creality-k1-bed-sheet-holder/ to print it faster
Fidget infinity cube (remixed) Takes only 2h instead of 3,5h, but is a little bit smaller
I made the whole test smaller and faster to print. Will save you time if you are used to original model. Print Files for printers: MK3 / MK3S /MK3S+ / MINI / MINI+ Print Files for filaments: PETG / PLA / ASA / PVB All instructions how to…
I used this model but i thought it took a bit to long so i took it on myself to try to fix it by making it a bit faster I added holes to the pegs to make them lighter and i made the test thinner, i also added another version of the test…
loud mini 3 piece horn. easy 1.5 hour print. 32 grams.
copied from Entroisdimensions: It is 100% articulated, it can be put in different positions. It prints in place, without support. It is compatible with PLA. _________ Personally I printed it in 0.2mm No support needed An infill of 15-20%…
MAKES 2 SHIELDS with a ~1h 20m reduction in print time. NEW VERSION helps for better build plate adherence on the MK3S. I've updated this to drop the print time down to ~3h 40m for 2 on an MK3s. THIS IS A REDUCTION OF ~1h 20m!!!! for two…
remodeled to make faster to print Print instructions No supports. Just print
Fully updated eye cups and design altogether. Less pointy and wider eye cup shape, accomodates wider range of faces. better drainage flow. better water application flow. better shape for printing, beter shape for carrying. It is…
Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 4pcs. and 8pcs. 4x stacked version. We have made a 3mf file with the right settings - especially for the transition between the two…
Less thick wings for faster printing, about half the time Méně tlustá křídla pro rychlejší tisk, cca poloviční čas
Improved model (1 hour print time savings) without loosing any comfort. Includes alternative laser cut head strap (instead of elastic) but compatible with both. DXF file for US letter size transparency film but with original European…
This is, currently, the most time and material efficient design (takes half as much time and plastic) Velcro cable tie mount design on Printables. While thinner and lighter, it's just as sturdy and durable. Can be stuck to any surface…
To prevent jumper wires with the ubiquitous 0.1" DuPont connectors from inadvertently being pulled out. Fast and simple to print, for 1 to 8 connections, in both standard lengths. Print at 0.2 mm layer height, without supports or brims,…
Simple holder for the camera TrueLife NannyCam H32 printed as a single piece. The camera holder is just a cut cup, ensuring a firm grip on the camera. The connected base now has stronger feet to ensure a proper and stable grip, even with…
Hey, We have made an optimized face shield, which is based on the Prusa Face shield and on a face shield we use locally (Open DIY maker space), which was made with a medical team. This gives the user more comfort and space for glasses +…
Bambu Lab - Faster Start - reduce waiting time | G-code trick Bambu's 'Machine start G-code' preheats the headbed and wait for it to be heaten until the printer moves on with preparations. This change in the machines G-code will move the…
Alternative insert for the great .30-06 ammo box by @Tomson
INSTRUCTIONS AND FEATURES HERE: I'm sharing with you my latest 3D printed Covid-19 face shield design! After many iterations, and combining some of the best features of popular face shield designs, I think this offers great protection,…
Edited the original model, because it took too long to print, because of the internal cavity.
Hey, After we have uploaded our Face Shield CS V2 you gave us great feedback. So now we present our 2pcs. and 4pcs. stacked version. We have made a 3mf file with the right settings - especially for the transition between the two Shields.…
Multiple divisions storage / organizer for make up utensils
Profiles for the Sovol Zero in OrcaSlicer, PrusaSlicer and SuperSlicer, generated from one source so all three slicers ask for the same speeds and accelerations. An optional Klipper macro pack adds bed boost for the chamber preheat, a…
cut the Stack Version
Thanks for the decoration. Less thick wings for faster printing, about half the time. Díky za ozdobu. Méně tlustá křídla pro rychlejší tisk, cca poloviční čas
Remix of a couple of designs to fit my tea-holding needs. Works great for PickWick bags. Alex's smaller model worked great for PickWick, so I started with his model, and inspired by Manuel's design added his base scaled down on top of it.…
I improved the original model with this mods: LED GASKET WINGS , so the LEDs can't shine into the eyes if you watching inside the chamber 45° LED gasket 12mm LED gasket LOWER LESS MATERIAL FASTER TO PRINT CAM OR GoPro SIDE MOUNT NO SIDE…
needs less time ans material as the version from Bkviegas Category: Electronics
This solid gear lets you use only infill instead of requiring walls for the inside of the hollow gear, this is lighter and faster to print (confirmed with slicer) Or you can print it 100% infill for a more engaging experience.
I got tired of dealing with the flimsy designs for the Blind Shaker Mount so I designed my own. Not only is this design stronger and more rigid, it also allows for the shaker to be held in two different ways. 1. With the lid on top held…
this is just a redesign of the can for the trash walker it's set for printing at 200% or larger! I went to print the trash walker larger but had 2 issue, 1st was the time! was over 80 hours for just the can!! 2nd was when I tried it in…
A simpler, faster print, without all the hexagons. Use this with the prusament refills. Source FreeCAD design included.
Introducing a set of 4 reusable elements that can be used to construct mini greenhouses of any size for your plants. These parts can be 3D-printed and assembled into desired shapes. To create a humid environment for your plants, wrap the…
Bambu's machine start G-code has the following right in the beginning (lines 23-26): ;===== heatbed preheat ==================== M1002 gcode_claim_action : 2 M140 S[bed_temperature_initial_layer_single] ;set bed temp M190…
To have all top surfaces of the model be at their intended height, you must either use 0.1mm layers everywhere (except 1st layer), or you can use 0.3mm layers with thin layers only where needed to get the correct top layer heights. Using…
I love Aikoly's design, but it takes a really long time to print… so I modified the original to remove the extruded honeycomb pattern and used modifiers to add it back in the slicer. It cuts 90-120 minutes off the print time. Each spool…
The model was elongated to the same length as the remix by Ernesi to use his remixed side supports. It uses a separately modeled solid bottom which should be printed with grid infill and zero bottom and top layers. This replaces the hex…
Print on standard slicer settings. If you like my remix… …please click "like", and post a make. This will help me to win some prusameters, and help other makers decide if this is a useful model. Thanks.
This is a simplified version of the famous " Multipurpose waste container " model by LMaker . The new model doesn't have the slot for divider and the logo at the bottom of the container. This results in a faster print and less artifacts…
This is a thinner version of OpenScad Lanyard in case speed is of the essence. Swap out the svg file for your own and update the code and re-render Print at .2 layer and speed Takes 21 min to print vs 68 minutes of the prior version (In…
This is a remix of the Thingiverse “Universal spool drawer”. I also drew inspiration from the design in the remix section. I used Fusion 360 to make this, which means you will also need it to edit the parameters. It has two versions in…
Simple funnel with faster air removal. Here are two models, one with a longer neck, and the next with a shorter one. Originally made for small bottles, but if you need a bigger one, just scale it at the slicer and make it bigger. Neck…
The filament swatch Rolodex by 3D Printy is a great idea! However, while printing a bunch of swatches, I found the file sometimes took minutes to render - which really slowed down my experimentation to find the right size and text for…
Remix of Gaggia Classic Pro Portafilter Left Side Hangar, split on the hanger bit and joined with M2 screws. It's faster to print since the portafiler part only needs support for the locks, and is more stable once installed. The original…
Changes from the original: Removed the letters on the front and decreased base thickness to 0.6m. This alone saves about an hour. Added a 2mm chamfer to the base to decrease chances of lifting at the corners while printing. Print with 0.2…
Key features 20% less material consumption (52g → 42g) faster print much faster slicing lightwight & sturdy design larger holes for better audio transmission 2 variants avaiable (with buttons / no buttons) whole part (for large printers)…
I got tired screwing phone into the holder (see here: https://www.printables.com/model/80163-bike-holder-for-phone-and-drink ), so I needed something faster and easier. In to the rescue comes @azure93 who's design you can find here:…
Biketiger's desiccant container is a winner! it's strong, and the perfect size. I just wish it printed faster. My quick solution is to allow the slicer to use expose the infill patterns. You can customise the style and the density. My…
Important Information At a 0.2 layer height, you should have luck setting your Gcode up with this info You can change the temps per layer to your own this is just what I use... PLA, & TPU 180°c @ Layer 1 185°c @ Layer 35 190°c @ Layer 70…
Compatible with RC3 windshield. More constant wall thicknesses, less holes, less extrusion start/stop and idle movements. Reduced weight of upper part. More flexible shield bar - easier assembly. Print instructions Upper part prints OK…
Improvement on savorycyanide's, model, reducing print time drastically by not needing supports. Can still mount to wall using command strips. Has a small custom support that allows a bridge to be made. Printed on Ender 3, using the 0.28mm…
Mod10 Rack Mount for Ubiquiti USW-Flex-Mini 2.5Gbe This is a 10-inch rack mount for the Ubiquiti UniFi USW-Flex-Mini-2.5G-5, designed for use in the Mod10 mini server rack (or any standard 10-inch rack). This is a remix of @mauker's…
DISCLAIMER: This is a very early release of this model and is intended for experienced users only until further development has been completed. Many quality-of-life features are lacking, and this should be seen as an early prototype…
This is the "breadboard" base for a crystal radio, similar to that from the cub scout manual 60 years ago. It has a thinner base than V1.0. See below for videos on construction. CRYSTAL RADIO VIDEOS How To Make A Crystal Radio - No…
This is a small extrusion multiplier calibration. Print with “Spiral Vase” mode turned on. Afterwards use digital calipers to measure the walls. Check your profile for what the external perimeters is set to. That's what you want to the…
This is a faster-printing version of the Planter-Pot Spacer ( https://www.printables.com/model/1540749 ). Like the original, it can be inserted in between the flower pot and its outer pot or planter, to lift the former higher up. This is…
IKEA LACK tables aren't tall enough to support many 3d printers, but printing taller supports takes ~50 hours in many cases. Instead, I used 61mm (~2") ABS pipe that cost me $6 and let me cut my printing time in half. You can cut the pipe…
We need to have small spacers for some cakes we make for friends. Something like the small “pizza tables” that come in pizza boxes. Most of the existing designs out there have the legs already attached in the model. This ends up with the…
The "Chimmney-less" Efficiency Benchy (4-Size Value Pack) We all love the Benchy, but let’s be honest: you don’t always need the chimney to know if your prints are looking good. By removing the unnecessary chimney and offering four…
Faster Pussycat 80's Band Sign As with most just resize to what you want and color if you have a color printer. I tried to keep the logo’s as original looking as I could, I made these for my wall not to sell & figured someone else might…
The original Hexagon based model is a retraction test and huge time consumer. This one prints in less time than both original options and doesn't need any supports when printed as pre-positioned.
Make sure Horizontal expansion compensation or elephant foot compensation is on the the bottom disappears. I didn't remove the bottom because it will be separate parts.
Update - 20/05/2025 This is my first version (more to come) of my opensource air pot. These style pots allow you to grow plants quicker due to the soil and roots getting more oxygen and is a proven science! I designed this around a basic…
English: Prusa MMU3 Straight PTFE Tube Adapter with PC4-M6 Push Fittings 📹 Video link: https://www.facebook.com/100000655244863/videos/pcb.5323751667850647/1730651454805405 Description After many hours of printing with the Prusa MMU3, I…
Uses 78,5% of filament and saved me 1 hour in print time for me compared to the original. I printed this with a 0.6 nozzle in 3 hours and 21 minuten. Instead of 4 hours 25 for the original version. Print settings i used: layer height 0.3…
This model is printed on its side compared to the original and it removes the decorative knurling on the exterior, as that also contributes to the print time significantly due to the scale. Huge thanks to sheldon911 on the blue website…
NOTHING BRING A GROUP OF @$$HOLES TOGETHER FASTER THAN..., sign Category: Signs & Logos
Cura Setting for Glass like transparent PLA. The principle for transparent PLA is: Quickly printing the tangent lines and letting them cool slowly without fan. also viods are removed by low layer height and 102% flow. And drying with…
Easy to print in one piece. This is a faster version of my hand-held, portable marble run. Turn the outside wheel to lift the bearings to the top of the tracks. They’ll pop out and run to bottom where they re-enter the outside wheel to…
WHAT THIS IS A remix of Jirka's Tool organizer. Same size, same pockets, same wall thickness, but the walls are opened up where the material does nothing. It prints in 7 hours instead of 11.5 and uses 296 g instead of 393 g on an MK4S at…
Eine 32mm Stecknuss mit 75mm Länge und Bohrung für die Verschraubung der Mutter.
I removed the X's on the side and middle, so it has fewer retractions.
The contractor left their leftover electric conduit pipes (PVC pipes) with 18mm outer diameter. I was in need of some spool holder, hence I created this model. The model supports 18mm PVC pipes, so anything that's around 18mm should work…
I'm pretty sure the 3mf files will only work with prusa slicer. import the files as 3d models, and look at the modifiers on the models themselves. The default is 50% grid infill for the bottom, and 15% ZigZag infill for the walls. Saves…
