6,141 models
*** Free to print, NOT to sell *** Thanks to sunset and sunset_3d_design for uploading this great model! UPDATE 12/11/2023: Added v9.5. Fixed the fused segment from the new PrusaSlicer updates. I moved the “Spikey” models into the archive…
This clip was design to fix/repair/secure the broken or loose tab of a RJ45 Ethernet connector and avoid crimping. Designed to prevent from moving, wiggling, falling from the connector and easy to install. UPDATE 27/01/2021 Added the 3…
6/10/2023 - 2.7 posted. Thanks to SuperRoach for pointing out the floating pieces in PrusaSlicer. With the latest PrusaSlicer RC1, it renders the bottoms of the gills on the left side of the head floating. That wasn't the case previously.…
Vader Skull. Added a version that fast-fixed the hole in the top of the helmet. its called darthvaderskullfixhole.3mf and .obj. Give it a shot let me know how it works.
Philips Fixables. 3D printed parts for fresh starts. Need a new comb to fit your Philips OneBlade? Print yours now. Trim and style your beard, just the way you like it. About Philips Fixables Fixables is a collection of 3D printable spare…
Remix of Val's Grogu from Mandolorian Original model https://www.thingiverse.com/thing:4038181
The best companion for holding small items and looks adorable! Prints in TPU too!!! Commercial Use License: https://cults3d.com/:1225970 65 cent Tip: https://cults3d.com/:1225958
When I loaded the file in Prusa Slicer it detected ~1800 errors. So I ran the file through Netfab to fix those. Nothing fancy but it might save someone the 5 mins it takes to run it through Netfab. Sunset owns the rights to this.
This model was uploaded on makerworld but did not work with prusaslicer very well. I painstakingly repainted it for 2 color mmu printing on my Prusa XL. Enjoy
Copy/pasted the description from the original author: I designed this piece to mount IKEA SKÅDIS boards onto a wall using regular screws. The board does come with screws and a mounting bracket, but I was looking for a more flexible…
V3 Update: Removed the sharp part on one side and added reinforcement to the top and around where the spring seats. Also used the reinforcement to lay the part down. I have not tried this yet, so not sure if a raft or support would be…
Ethernet cable fix which prints WITHOUT SUPPORTS. The layer line orientation aids in keeping the cable in the port. Print settings: layer height 0.2mm 3 thick walls Infill: Does not matter since the piece is too small to even have infill…
For the Ender 3 V2 Neo and Sprite Pro. First print the SpriteProHouse file properly oriented or using the gcode files provided, with a printer that's working. If using PLA and the gcode files, drop the temperature to 215 and the speed to…
This is the new field box that is shipped with OF-M4.4 but in a 3D printer friendly version. This version takes advantage of the included magnets to hold the base securely as a lid. The box also includes slots that could be used to secure…
Festool FastFix Centrotec holder - simplify your tool management Where do you currently store your FastFix Centrotec adapters? Print your own Festool FastFix Centrotec holder and make your everyday work easier and more productive. Don't…
Use this sd card hull if your sd card has physical damage and is unreadable or not recognized by the pc. A while back the plastic hull of my sd card broke and it was no longer recognized by the pc. Using this model I was able to put the…
Not my design, remix of ( https://www.thingiverse.com/thing:3388581 ) This fixes issue where figure wasn't flat on the build plane. Rotated -0.2 degrees to make it flat and cropped a bit to prevent overhang around the edges. Also:…
Fixation for (un)original Prusa drybox on the Prusa enclosure ( slim version available) You need some screw and nuts same one you use in a Prusa kit. 4x M3 nuts 8x M3x6 4x M3x12 -5 Spool rewinder adapter for MMU2S / MMU3 in (un)original…
Introducing the FDM (Fixum Dude Motors) print in place package delivery truck. Inspired by the Clockspring3D Flippy Ladder Firetruck ( https://www.printables.com/model/488109-flippy-ladder-firetruck-filament-stories-and-hotma ), but all…
This fixture is used for indexing work using a vise and square for 45, 60, and 90 degree angles. Of course this printed version is not going to be as durable or precise as the commercial metal version, but should still be useful for many…
I have Z-Axis rattle noise since I have my MK3S+ and searched multiple fixes. Including here I found some. But nothing seemed to fix the issue that I have. However thanks to sabaatworld I actually found out why I have this noise. He has…
This decorative and functional light has been designed to be printed in one continuous spiral - fast, lightweight, material saving, functional and... beautiful? The model is prepared for an E14 220V lamp holder with a screw fix (+/- 3 cm…
NOTE: This print was designed for and tested with 3mm thick acrylic panels. If you are purchasing a panel set from Printed Solid, be aware that they have changed their material thickness to 1/8" (3.175mm). I have generated new model and…
Just import the model into prusa slicer. The main body already has a fuzzy skin modifier on it. Change it however you like it. Eyes and horns wont be fuzzy. Please print many poros and share your makes :-)
Introducing the upgraded version of the self-watering planter design! This remix takes the original square design from Mikolas Zuza and improves upon it with fixes to the problematic outer and inner parts. With its self-watering feature,…
Butterfly knife blade (Butterfly Comb / Balisong Comb)
These dividers takes advantage of the slots in the design of the new Omnifixo M4.4 field box, feel free to make variations that suits your needs.
Has your Dummy 13 been “Chalk Lined”? Too weak in the knees to even stand up? After printing your Dummy 13 or other articulated model, you may have a loss in stiffness of the model when the 3D printed joints wear or stretch. This can…
Minimalistic replacement for the tiny piece of plastic that holds each earcup of Audio Technica ATH-M50X headphones in place. Note: it's more rigid than the original solution, so headphones are not going to fold as nicely anymore. What…
This is a fixed belt clip for the Baofeng UV-9R radio that is compatible with MOLLE/PALS webbing. The original clip is a rotating design that isn't suitable for some applications . This clip snaps over the lanyard attachment on top and…
The fixed length column for TwoTreess' TTS-55 to adjust the laser focus with an installed Air Assist that the manufacturer forgot! If you have installed the original Air Assist, the distance to the workpiece changes. With this model, you…
REMIX RC1 RC2 RC3.1 shield face protection from Prusa without any hole to do in the shield and compatible with any 150 x 150 printer (medium model) REMIX: https://www.thingiverse.com/thing:4233193…
A replacement for the hinge of Skullcandy Crusher Wireless headphones. THIS IS NOT A MOVING HINGE!!! This is a rigid replacement that will be easier to print.
One engine plus five different train cars included in this simple print in place train set. All the cars print without supports with wheels and hooks that move right off the build plate. Examples printed at 0.2 mm layer height with 3…
The usb-c hotend cable of the Elegoo CC if know to fail. Mine did. So I route a TB-4 cable through the printer and used this piece to secure the plug. This is the first version, and it fits my cable. I'll probably make modifications /…
Tile for 3D printed game, Hextraction. Remixed from Zach Freedman's model, which has the unintended consequence of the center star acting like a ramp instead of allowing the model to trap the balls. In my remix, I changed the star from an…
CONSEIL : Imprimer sur du PLA+ ou PETG pour plus de rigidité.
Mounting clips allow to fix a LED-strip aluminium profile at 20, 30 or 45deg angle. The profile clips into the holders.
A Gridfinity tool holder for an iFixit Kit.
A small holder for the accessories from the ifixit pro tech toolkit. I used this holder for the pliers: https://www.printables.com/de/model/540978-hsw-tweezer-holder I used this holder for the Mako Screwdrivers and cutted the holders on…
After the conversion of the Einsy into the Big Einsy Case, the cable routing to the bottom was unfavorable.
The wall clamp provides fixation for 35mm pipes or corrugated hoses. Designed with a 34.7mm clamping function and 11mm height. Hole for countersunk M5 Screw. Printed on my Prusa with: 0.3mm layer height, 50% infill 0.4mm nozzle.…
I'm a huge fan of this design. It really does quiet down the Mini, quite significantly. However, I was having issues with the back foot coming off every time the printer was moved. I.e. removing the print bed, inserting the memory stick,…
Fixation pour maintenir la DRY box SUNLU sur la FLSUN SR, même ouverte. Ce servir du sabot pour repérer le trou de 2.5mm a faire sur la dry box et mettre un vis de M3*20
Summary - Replacement fishing rod ferrule ring. Repairs a fishing rod that has a ferrule that is missing the smooth ring that protects the fishing line from direct contact with the metal ferrule ring. Story - I grabbed my spare rod to go…
The arm-rests on many Ozark Trail camp chairs are held in place by a fabric strap. This has a tendency to wear out and break loose. This clamp is placed below the arm-rest to hold it in place. My work is all free forever. If you want to…
I was tired because my Ryobi Cordless Router could not hang just like my other Ryobi tools. Then I found the Ryobi RLYARD Lanyard, which was only a half solution. Then there is only one solution, print a new top for RLYARD. It works with…
EDIT 5Oct2026: Changed License. And my repair with PETG from 2022 is still holding! Edit Feb 2025: I added another handle piece that is 4mm shorter and .2mm larger diameter hole for the wire. This is intended for better fit on buckets…
Glue gun trigger/button broke. After taking the glue gun apart is turned out that a plastic piece which connects the button with the trolley responsible for moving the silicon insert forward had broken. Print instructions 0.15mm fast…
When handling prints, maintaining or adjusting the 3D printer placed in the Original Prusa Enclosure, the Enclosure door must be open. Quite often the door moves by itself to a position that is undesirable. Using a set of these 3D models…
Upgrade your small parts magazine! The Powerfix / Parkside Kleinteilemagazin 17 & 33 (sold by Lidl, FR: rangement pour matériel de bricolage) and Allit VarioPlus Hobby 17 & 33 (sold by Hornbach) come without lids. Take them anywhere! This…
Created this quick fix for the drying rack. This model is designed for these measurements: rod insert diameter: 2.5mm bar clamp diameter: 14.4mm If needed, I can upload other sizes and create a proper parameterized design file.
Simple clamp, adjust the height to the desired height of your chair and clamp around the base. Any number of bolts should fit through the holes, by default the holes are just over 8mm across. Made this in PETG to fix the wife's chair. I…
Ground screw for fix Husqvarna automower base https://www.az-shop.cz/cms/fiskars/products/automaticke-sekacky/nahradni-dily/pripevnovaci-srouby-pro-nabijeci-stanici-k-sekackam-automower.jpg
J'ai changé mon plateau en verre par un plateau acier avec feuille de PEI, comme beaucoup. https://fr.aliexpress.com/item/1005003198020145.html?gatewayAdapt=glo2fra&spm=a2g0o.9042311.0.0.5b6e6c37kdGHKX c'est toujours la misère a replacer…
Držáky k nástěnému organizéru z Lidlu. Tištěno z PLA na ležato bez podpěr.
A remix of MarMed's iFixit 64 bit driver kit holder but without the logo, as I prefer the clean look. Printer settings 0.6 nozzle (Bondtech CHT), 0.3 Quality profile. Supports enabled (everywhere) Printed with Clas Ohlson PETG but PLA…
V1 ist in Anlehnung an die originale Backe mit zusäzlicher Zentrierung für z.B. runde Bauteile V2 ist besser für den 3D-Druck geeignet; die Rundungen wurden durch 45° Fasen ersetzt. (more print friendly)
Klick Fix Halter Holder for diy bicycle bag or basket
Um die POWERFIX Aluminium Kartuschenpistole auch ohne zusätzliche Kartusche oder für andere Materialien zu verwenden, habe ich einen Einsatz mit passendem Gewinde für die gängigen Dosierspitzen erstellt. To use the POWERFIX Aluminum…
Gardena Sprinkler Hose Fixation Hook aka Schlauchregnerbefestigungshaken (and yeah , that german 32 character word is grammatically correct) Print with PETG for outdoor temperature stability. Otherwise the sun will “melt” your PLA print…
Edit 9.8.2024: One of the screw tabs of my holder snapped, so I uploaded a more reinforced one that should definitely last without issues, also added a cutout for tightening the bottom screw after deciding it wouldn't look that bad after…
Like many, my Frankenquest using the Vive DAS suffered from the issue of the earphones flipping up during use. I read about the fixes involving tightening the screw under the foam (this didn't help, it's more for loose rotation rather…
Remixed the great model by plomdawg to remove the ifixit logo
FINALLY! I can print more than 2 or 3 of these clips without an adhesion fail. I print these bag clips when I want to finish rolls of filament, then I give them away to friends, family, or anyone who shows interest in my 3D printers.…
A working model of ASD1660 Toolholder from PeWe-Tools. Created for Holding a Dial Indicator. This will fit in a Multifix AS16. See here: https://www.prusaprinters.org/prints/134855-holder-for-dial-indicator I recommend printing all the…
Boîtier pour capteur ultrason HC-SR04 destiné à la fixer à l'aide de deux aimants de diamètre 15 mm. Deux parties imprimables.
Need a cost-effective 3D-printing service? Are you in need of support or a specific adjustment? Send me a message, I am here to help. --------------------------------------------------------------- To guide the cables running from your…
Clip de remplacement pour fixer une plinthe sans vis apparente (système de la marque “Skandor”, vendue chez Hornbach). La plinthe vient glissée dans le clip une fois celle-ci fixée au mur. Hauteur du clip = 26 mm
This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…
Pas de perçage, dans les panneaux, ¼ de tour, insérer une vis ou python dans la pièce PLA et reste à mettre une horloge, cadre photo, miroir …
This is a simple base / box to organize an Omnifixo OF-M4 plate and its 4 OF-C1 clamps. The model can be modified to accommodate different sizes of magnets and even the OF-S2 plate. The STL and GCode files are made to accept 8x3mm magnets…
Sur inspiration de gloda et Andy Forsberg , un redesign pour le AL1820cv. Fixation murale pour chargeur Bosch AL1820cv Impression en PLA en 0,2mm sans support
Template for drawing stick figures. Good bed adhesion is needed - PLA will need a well-cleaned plate and may be simpler to print with PETG. The figure outlines are properly sloped so you can draw the figures accurately regardless of angle…
At some point in time, the Powerfix Wall mount pegboard changed the holes from squares to circles, and the square peg won't fit into the circular holes unless you trim the corners with side cutters. Since this isn't very elegant, I made…
This remix maintains the fix for the collision between the Buddy3D camera and the vent grille while also adjusting the camera viewing angle to better capture the printing surface. This is a very simple fix that results in better operation…
The old Philips Hue dimmer switch has a design flaw causing it to break and the battery not sitting tight. This part replaces the broken thin piece of plastic that hold the battery cover tight. It's a very small part, don't use old…
This modified adapter-printer part changes the position of the steel ball in the filament sensor of the MK3S+ to fix detection problems. Background I was having failed detections with TPU filament because it was slightly compressed by the…
A practical desk stand for Powerfix Mini Tool Kit (sold in Lidl). Print instructions There are two versions of this toolkit on the market: IAN270033 and IAN304786 (with slightly different sizes of the extender and the tweezers.) Check…
After having read up on the problem of my mmu2s unit at these links: On Prusa Forum:…
This holder ensures secure and convenient storage for your rotary cutter, allowing quick access whenever creativity strikes. Contains magnet holes and can be stacked.
Got a Roomba s9+ with the tab that moves the bag tube broken. You can not purchase this part and finding a used replacement is VERY hard, SO I designed this two piece fix for the tube tab. printed in PETG with 100% infill 4 perimeters and…
Note by the way! The ABUS U-lock Granit XPlus 540 30cm does not fit through the rims of the Ninebot G30D due to the rectangular shape of the bracket and is only suitable for connecting the Ninebot frame (45 ° spar) to a traffic sign or…
I could print all the MMU3 parts without issue but the Idler and Pulley body would fail every time as it printed those levitating squares. Some say they're to help the part remove from the sheet but if I go to the parts once the bed has…
Dishwasher Sign REMIX with layer height color change. more magnet types, thinner mag plate for stronger connection, and
A small holder for Multifix Aa to holde an Indicator for centering the Workpiece. The indicator has a stem diameter of 8 mm for mounting and a max size of the face of 62 mm. To use it, you need two M3 screws an 3 M3 nuts. The print file…
iPhone 6 & 7 plus holder with hr herbert richter fast fix panorama adapter plate for in car navi application. the adapter plate ist not fix, so you can create your own shape if needed. easy assembling, no glue needed, self snapping into…
Diese Halterung dient zur Fixierung der am Küchenboden quer verlaufenden Blende (Holzbrett / Holzblende). Auf den Fotos sieht man meine pinkfarbenen Drucke und das schwarze Original (nicht von mir gedruckt). Print instructions Gedruckt…
This clip allows a simple installation of a LED-strip aluminium profile on the bottom blind of your kitchen counter. The clip is designed for a thicknes of 18.5 mm of the blind. The fixation with 2mm wood screws is optional. The aluminium…
This model is a remix of https://www.printables.com/model/250269-drying-rack-wire-repair It is a bit shorter and thinne
A Quickfix junction box for Wago terminals is an excellent junction box, but provides no bracket. This design allows the junction box to be mounted to a wall or beam by screwing the mounting bracket then pushing the junction box into the…
I designed the tray for my Multifix holders to store them in the workbench. Printed with PLA @ 0,25mm an 0,6mm nozzle.
The printing of the adapter requires support. Printing with 4 contours and PETG increases the stability of the adapter. PETG is more suitable than PLA. The adapter can remain as a cover on the Klickfix when the Gopro is not used. Printing…
Intro A practical industrial-style brace designed to stabilize leaning and wobbling IKEA HEKTAR lamps. Features a wide reinforced base with structural ribs that prevent the lamp's pole from leaning and wobbling in any direction,…
8h 56 min on MINGDA Magician X2 and only 95g ! 4 USB holders 6 MicroSD CARDS 3 SD CARDS 3 Other containers for anything NO SUPPORT NEEDED !!! Will be nice who can donate :) for my filaments :) YHANKS! https://www.buymeacoffee.com/stoykoly
The clamps holding my 25 odd years old Klick fix attachment to the handlebar broke. I found it was quite easy to print a replacement. Print with PETG, flat on the bed. Use roughly 6 perimeters to make it strong.
Part 2 of the geometric series. It will be a great addition to your desk, showing all the cool things 3D printers can do
This model is designed to be used with the Prusa Enclosure, which has a hinged lid. The two bars are screwed directly onto the lid of the Prusa Enclosure. The feet are screwed onto the corners of the dry box where the bottom plate is…
i made this myself for my own pool cover
![[Adhesion Fix Remix] Cam lock bag clip](https://media.printables.com/media/prints/0e68c640-31dc-4903-aa81-c039838a7716/images/9799190_0508c4ff-d768-4110-88d8-562f610ca2ef_2d139680-28fa-430c-beaa-4cc2ff118352/20240225_180635.jpg)
